Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver for Comtrol RocketPort EXPRESS/INFINITY cards
4 *
5 * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
6 *
7 * Inspired by, and loosely based on:
8 *
9 * ar933x_uart.c
10 * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
11 *
12 * rocketport_infinity_express-linux-1.20.tar.gz
13 * Copyright (C) 2004-2011 Comtrol, Inc.
14 */
15
16#include <linux/bitops.h>
17#include <linux/compiler.h>
18#include <linux/completion.h>
19#include <linux/console.h>
20#include <linux/delay.h>
21#include <linux/firmware.h>
22#include <linux/init.h>
23#include <linux/io.h>
24#include <linux/ioport.h>
25#include <linux/irq.h>
26#include <linux/kernel.h>
27#include <linux/log2.h>
28#include <linux/module.h>
29#include <linux/pci.h>
30#include <linux/serial.h>
31#include <linux/serial_core.h>
32#include <linux/slab.h>
33#include <linux/sysrq.h>
34#include <linux/tty.h>
35#include <linux/tty_flip.h>
36#include <linux/types.h>
37
38#define DRV_NAME "rp2"
39
40#define RP2_FW_NAME "rp2.fw"
41#define RP2_UCODE_BYTES 0x3f
42
43#define PORTS_PER_ASIC 16
44#define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1)
45
46#define UART_CLOCK 44236800
47#define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16))
48#define FIFO_SIZE 512
49
50/* BAR0 registers */
51#define RP2_FPGA_CTL0 0x110
52#define RP2_FPGA_CTL1 0x11c
53#define RP2_IRQ_MASK 0x1ec
54#define RP2_IRQ_MASK_EN_m BIT(0)
55#define RP2_IRQ_STATUS 0x1f0
56
57/* BAR1 registers */
58#define RP2_ASIC_SPACING 0x1000
59#define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING))
60
61#define RP2_PORT_BASE 0x000
62#define RP2_PORT_SPACING 0x040
63
64#define RP2_UCODE_BASE 0x400
65#define RP2_UCODE_SPACING 0x80
66
67#define RP2_CLK_PRESCALER 0xc00
68#define RP2_CH_IRQ_STAT 0xc04
69#define RP2_CH_IRQ_MASK 0xc08
70#define RP2_ASIC_IRQ 0xd00
71#define RP2_ASIC_IRQ_EN_m BIT(20)
72#define RP2_GLOBAL_CMD 0xd0c
73#define RP2_ASIC_CFG 0xd04
74
75/* port registers */
76#define RP2_DATA_DWORD 0x000
77
78#define RP2_DATA_BYTE 0x008
79#define RP2_DATA_BYTE_ERR_PARITY_m BIT(8)
80#define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9)
81#define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10)
82#define RP2_DATA_BYTE_BREAK_m BIT(11)
83
84/* This lets uart_insert_char() drop bytes received on a !CREAD port */
85#define RP2_DUMMY_READ BIT(16)
86
87#define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \
88 RP2_DATA_BYTE_ERR_OVERRUN_m | \
89 RP2_DATA_BYTE_ERR_FRAMING_m | \
90 RP2_DATA_BYTE_BREAK_m)
91
92#define RP2_RX_FIFO_COUNT 0x00c
93#define RP2_TX_FIFO_COUNT 0x00e
94
95#define RP2_CHAN_STAT 0x010
96#define RP2_CHAN_STAT_RXDATA_m BIT(0)
97#define RP2_CHAN_STAT_DCD_m BIT(3)
98#define RP2_CHAN_STAT_DSR_m BIT(4)
99#define RP2_CHAN_STAT_CTS_m BIT(5)
100#define RP2_CHAN_STAT_RI_m BIT(6)
101#define RP2_CHAN_STAT_OVERRUN_m BIT(13)
102#define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16)
103#define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17)
104#define RP2_CHAN_STAT_CD_CHANGED_m BIT(18)
105#define RP2_CHAN_STAT_RI_CHANGED_m BIT(22)
106#define RP2_CHAN_STAT_TXEMPTY_m BIT(25)
107
108#define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \
109 RP2_CHAN_STAT_CTS_CHANGED_m | \
110 RP2_CHAN_STAT_CD_CHANGED_m | \
111 RP2_CHAN_STAT_RI_CHANGED_m)
112
113#define RP2_TXRX_CTL 0x014
114#define RP2_TXRX_CTL_MSRIRQ_m BIT(0)
115#define RP2_TXRX_CTL_RXIRQ_m BIT(2)
116#define RP2_TXRX_CTL_RX_TRIG_s 3
117#define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
118#define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s)
119#define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s)
120#define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
121#define RP2_TXRX_CTL_RX_EN_m BIT(5)
122#define RP2_TXRX_CTL_RTSFLOW_m BIT(6)
123#define RP2_TXRX_CTL_DTRFLOW_m BIT(7)
124#define RP2_TXRX_CTL_TX_TRIG_s 16
125#define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
126#define RP2_TXRX_CTL_DSRFLOW_m BIT(18)
127#define RP2_TXRX_CTL_TXIRQ_m BIT(19)
128#define RP2_TXRX_CTL_CTSFLOW_m BIT(23)
129#define RP2_TXRX_CTL_TX_EN_m BIT(24)
130#define RP2_TXRX_CTL_RTS_m BIT(25)
131#define RP2_TXRX_CTL_DTR_m BIT(26)
132#define RP2_TXRX_CTL_LOOP_m BIT(27)
133#define RP2_TXRX_CTL_BREAK_m BIT(28)
134#define RP2_TXRX_CTL_CMSPAR_m BIT(29)
135#define RP2_TXRX_CTL_nPARODD_m BIT(30)
136#define RP2_TXRX_CTL_PARENB_m BIT(31)
137
138#define RP2_UART_CTL 0x018
139#define RP2_UART_CTL_MODE_s 0
140#define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s)
141#define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s)
142#define RP2_UART_CTL_FLUSH_RX_m BIT(3)
143#define RP2_UART_CTL_FLUSH_TX_m BIT(4)
144#define RP2_UART_CTL_RESET_CH_m BIT(5)
145#define RP2_UART_CTL_XMIT_EN_m BIT(6)
146#define RP2_UART_CTL_DATABITS_s 8
147#define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s)
148#define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s)
149#define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s)
150#define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s)
151#define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s)
152#define RP2_UART_CTL_STOPBITS_m BIT(10)
153
154#define RP2_BAUD 0x01c
155
156/* ucode registers */
157#define RP2_TX_SWFLOW 0x02
158#define RP2_TX_SWFLOW_ena 0x81
159#define RP2_TX_SWFLOW_dis 0x9d
160
161#define RP2_RX_SWFLOW 0x0c
162#define RP2_RX_SWFLOW_ena 0x81
163#define RP2_RX_SWFLOW_dis 0x8d
164
165#define RP2_RX_FIFO 0x37
166#define RP2_RX_FIFO_ena 0x08
167#define RP2_RX_FIFO_dis 0x81
168
169static struct uart_driver rp2_uart_driver = {
170 .owner = THIS_MODULE,
171 .driver_name = DRV_NAME,
172 .dev_name = "ttyRP",
173 .nr = CONFIG_SERIAL_RP2_NR_UARTS,
174};
175
176struct rp2_card;
177
178struct rp2_uart_port {
179 struct uart_port port;
180 int idx;
181 struct rp2_card *card;
182 void __iomem *asic_base;
183 void __iomem *base;
184 void __iomem *ucode;
185};
186
187struct rp2_card {
188 struct pci_dev *pdev;
189 struct rp2_uart_port *ports;
190 int n_ports;
191 int initialized_ports;
192 int minor_start;
193 int smpte;
194 void __iomem *bar0;
195 void __iomem *bar1;
196 spinlock_t card_lock;
197};
198
199#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
200#define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0))
201
202static inline void rp2_decode_cap(const struct pci_device_id *id,
203 int *ports, int *smpte)
204{
205 *ports = id->driver_data >> 8;
206 *smpte = id->driver_data & 0xff;
207}
208
209static DEFINE_SPINLOCK(rp2_minor_lock);
210static int rp2_minor_next;
211
212static int rp2_alloc_ports(int n_ports)
213{
214 int ret = -ENOSPC;
215
216 spin_lock(&rp2_minor_lock);
217 if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) {
218 /* sorry, no support for hot unplugging individual cards */
219 ret = rp2_minor_next;
220 rp2_minor_next += n_ports;
221 }
222 spin_unlock(&rp2_minor_lock);
223
224 return ret;
225}
226
227static inline struct rp2_uart_port *port_to_up(struct uart_port *port)
228{
229 return container_of(port, struct rp2_uart_port, port);
230}
231
232static void rp2_rmw(struct rp2_uart_port *up, int reg,
233 u32 clr_bits, u32 set_bits)
234{
235 u32 tmp = readl(up->base + reg);
236 tmp &= ~clr_bits;
237 tmp |= set_bits;
238 writel(tmp, up->base + reg);
239}
240
241static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val)
242{
243 rp2_rmw(up, reg, val, 0);
244}
245
246static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val)
247{
248 rp2_rmw(up, reg, 0, val);
249}
250
251static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num,
252 int is_enabled)
253{
254 unsigned long flags, irq_mask;
255
256 spin_lock_irqsave(&up->card->card_lock, flags);
257
258 irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK);
259 if (is_enabled)
260 irq_mask &= ~BIT(ch_num);
261 else
262 irq_mask |= BIT(ch_num);
263 writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK);
264
265 spin_unlock_irqrestore(&up->card->card_lock, flags);
266}
267
268static unsigned int rp2_uart_tx_empty(struct uart_port *port)
269{
270 struct rp2_uart_port *up = port_to_up(port);
271 unsigned long tx_fifo_bytes, flags;
272
273 /*
274 * This should probably check the transmitter, not the FIFO.
275 * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is
276 * enabled.
277 */
278 uart_port_lock_irqsave(&up->port, &flags);
279 tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT);
280 uart_port_unlock_irqrestore(&up->port, flags);
281
282 return tx_fifo_bytes ? 0 : TIOCSER_TEMT;
283}
284
285static unsigned int rp2_uart_get_mctrl(struct uart_port *port)
286{
287 struct rp2_uart_port *up = port_to_up(port);
288 u32 status;
289
290 status = readl(up->base + RP2_CHAN_STAT);
291 return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) |
292 ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) |
293 ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) |
294 ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0);
295}
296
297static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
298{
299 rp2_rmw(port_to_up(port), RP2_TXRX_CTL,
300 RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m,
301 ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) |
302 ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) |
303 ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0));
304}
305
306static void rp2_uart_start_tx(struct uart_port *port)
307{
308 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
309}
310
311static void rp2_uart_stop_tx(struct uart_port *port)
312{
313 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
314}
315
316static void rp2_uart_stop_rx(struct uart_port *port)
317{
318 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m);
319}
320
321static void rp2_uart_break_ctl(struct uart_port *port, int break_state)
322{
323 unsigned long flags;
324
325 uart_port_lock_irqsave(port, &flags);
326 rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m,
327 break_state ? RP2_TXRX_CTL_BREAK_m : 0);
328 uart_port_unlock_irqrestore(port, flags);
329}
330
331static void rp2_uart_enable_ms(struct uart_port *port)
332{
333 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m);
334}
335
336static void __rp2_uart_set_termios(struct rp2_uart_port *up,
337 unsigned long cfl,
338 unsigned long ifl,
339 unsigned int baud_div)
340{
341 /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */
342 writew(baud_div - 1, up->base + RP2_BAUD);
343
344 /* data bits and stop bits */
345 rp2_rmw(up, RP2_UART_CTL,
346 RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m,
347 ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) |
348 (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) |
349 (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) |
350 (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) |
351 (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0));
352
353 /* parity and hardware flow control */
354 rp2_rmw(up, RP2_TXRX_CTL,
355 RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m |
356 RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m |
357 RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m |
358 RP2_TXRX_CTL_CTSFLOW_m,
359 ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) |
360 ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) |
361 ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) |
362 ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m |
363 RP2_TXRX_CTL_CTSFLOW_m) : 0));
364
365 /* XON/XOFF software flow control */
366 writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis,
367 up->ucode + RP2_TX_SWFLOW);
368 writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis,
369 up->ucode + RP2_RX_SWFLOW);
370}
371
372static void rp2_uart_set_termios(struct uart_port *port, struct ktermios *new,
373 const struct ktermios *old)
374{
375 struct rp2_uart_port *up = port_to_up(port);
376 unsigned long flags;
377 unsigned int baud, baud_div;
378
379 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
380 baud_div = uart_get_divisor(port, baud);
381
382 if (tty_termios_baud_rate(new))
383 tty_termios_encode_baud_rate(new, baud, baud);
384
385 uart_port_lock_irqsave(port, &flags);
386
387 /* ignore all characters if CREAD is not set */
388 port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ;
389
390 __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div);
391 uart_update_timeout(port, new->c_cflag, baud);
392
393 uart_port_unlock_irqrestore(port, flags);
394}
395
396static void rp2_rx_chars(struct rp2_uart_port *up)
397{
398 u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT);
399 struct tty_port *port = &up->port.state->port;
400
401 for (; bytes != 0; bytes--) {
402 u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ;
403 u8 ch = byte & 0xff;
404
405 if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) {
406 if (!uart_handle_sysrq_char(&up->port, ch))
407 uart_insert_char(&up->port, byte, 0, ch,
408 TTY_NORMAL);
409 } else {
410 u8 flag = TTY_NORMAL;
411
412 if (byte & RP2_DATA_BYTE_BREAK_m)
413 flag = TTY_BREAK;
414 else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m)
415 flag = TTY_FRAME;
416 else if (byte & RP2_DATA_BYTE_ERR_PARITY_m)
417 flag = TTY_PARITY;
418 uart_insert_char(&up->port, byte,
419 RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag);
420 }
421 up->port.icount.rx++;
422 }
423
424 tty_flip_buffer_push(port);
425}
426
427static void rp2_tx_chars(struct rp2_uart_port *up)
428{
429 u8 ch;
430
431 uart_port_tx_limited(&up->port, ch,
432 FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT),
433 true,
434 writeb(ch, up->base + RP2_DATA_BYTE),
435 ({}));
436}
437
438static void rp2_ch_interrupt(struct rp2_uart_port *up)
439{
440 u32 status;
441
442 uart_port_lock(&up->port);
443
444 /*
445 * The IRQ status bits are clear-on-write. Other status bits in
446 * this register aren't, so it's harmless to write to them.
447 */
448 status = readl(up->base + RP2_CHAN_STAT);
449 writel(status, up->base + RP2_CHAN_STAT);
450
451 if (status & RP2_CHAN_STAT_RXDATA_m)
452 rp2_rx_chars(up);
453 if (status & RP2_CHAN_STAT_TXEMPTY_m)
454 rp2_tx_chars(up);
455 if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
456 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
457
458 uart_port_unlock(&up->port);
459}
460
461static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id)
462{
463 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
464 int ch, handled = 0;
465 unsigned long status = readl(base + RP2_CH_IRQ_STAT) &
466 ~readl(base + RP2_CH_IRQ_MASK);
467
468 for_each_set_bit(ch, &status, PORTS_PER_ASIC) {
469 rp2_ch_interrupt(&card->ports[ch]);
470 handled++;
471 }
472 return handled;
473}
474
475static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id)
476{
477 struct rp2_card *card = dev_id;
478 int handled;
479
480 handled = rp2_asic_interrupt(card, 0);
481 if (card->n_ports >= PORTS_PER_ASIC)
482 handled += rp2_asic_interrupt(card, 1);
483
484 return handled ? IRQ_HANDLED : IRQ_NONE;
485}
486
487static inline void rp2_flush_fifos(struct rp2_uart_port *up)
488{
489 rp2_rmw_set(up, RP2_UART_CTL,
490 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
491 readl(up->base + RP2_UART_CTL);
492 udelay(10);
493 rp2_rmw_clr(up, RP2_UART_CTL,
494 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
495}
496
497static int rp2_uart_startup(struct uart_port *port)
498{
499 struct rp2_uart_port *up = port_to_up(port);
500
501 rp2_flush_fifos(up);
502 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m);
503 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m,
504 RP2_TXRX_CTL_RX_TRIG_1);
505 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
506 rp2_mask_ch_irq(up, up->idx, 1);
507
508 return 0;
509}
510
511static void rp2_uart_shutdown(struct uart_port *port)
512{
513 struct rp2_uart_port *up = port_to_up(port);
514 unsigned long flags;
515
516 rp2_uart_break_ctl(port, 0);
517
518 uart_port_lock_irqsave(port, &flags);
519 rp2_mask_ch_irq(up, up->idx, 0);
520 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
521 uart_port_unlock_irqrestore(port, flags);
522}
523
524static const char *rp2_uart_type(struct uart_port *port)
525{
526 return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL;
527}
528
529static void rp2_uart_release_port(struct uart_port *port)
530{
531 /* Nothing to release ... */
532}
533
534static int rp2_uart_request_port(struct uart_port *port)
535{
536 /* UARTs always present */
537 return 0;
538}
539
540static void rp2_uart_config_port(struct uart_port *port, int flags)
541{
542 if (flags & UART_CONFIG_TYPE)
543 port->type = PORT_RP2;
544}
545
546static int rp2_uart_verify_port(struct uart_port *port,
547 struct serial_struct *ser)
548{
549 if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2)
550 return -EINVAL;
551
552 return 0;
553}
554
555static const struct uart_ops rp2_uart_ops = {
556 .tx_empty = rp2_uart_tx_empty,
557 .set_mctrl = rp2_uart_set_mctrl,
558 .get_mctrl = rp2_uart_get_mctrl,
559 .stop_tx = rp2_uart_stop_tx,
560 .start_tx = rp2_uart_start_tx,
561 .stop_rx = rp2_uart_stop_rx,
562 .enable_ms = rp2_uart_enable_ms,
563 .break_ctl = rp2_uart_break_ctl,
564 .startup = rp2_uart_startup,
565 .shutdown = rp2_uart_shutdown,
566 .set_termios = rp2_uart_set_termios,
567 .type = rp2_uart_type,
568 .release_port = rp2_uart_release_port,
569 .request_port = rp2_uart_request_port,
570 .config_port = rp2_uart_config_port,
571 .verify_port = rp2_uart_verify_port,
572};
573
574static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id)
575{
576 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
577 u32 clk_cfg;
578
579 writew(1, base + RP2_GLOBAL_CMD);
580 readw(base + RP2_GLOBAL_CMD);
581 msleep(100);
582 writel(0, base + RP2_CLK_PRESCALER);
583
584 /* TDM clock configuration */
585 clk_cfg = readw(base + RP2_ASIC_CFG);
586 clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9);
587 writew(clk_cfg, base + RP2_ASIC_CFG);
588
589 /* IRQ routing */
590 writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK);
591 writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ);
592}
593
594static void rp2_init_card(struct rp2_card *card)
595{
596 writel(4, card->bar0 + RP2_FPGA_CTL0);
597 writel(0, card->bar0 + RP2_FPGA_CTL1);
598
599 rp2_reset_asic(card, 0);
600 if (card->n_ports >= PORTS_PER_ASIC)
601 rp2_reset_asic(card, 1);
602
603 writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK);
604}
605
606static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw)
607{
608 int i;
609
610 writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL);
611 readl(up->base + RP2_UART_CTL);
612 udelay(1);
613
614 writel(0, up->base + RP2_TXRX_CTL);
615 writel(0, up->base + RP2_UART_CTL);
616 readl(up->base + RP2_UART_CTL);
617 udelay(1);
618
619 rp2_flush_fifos(up);
620
621 for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++)
622 writeb(fw->data[i], up->ucode + i);
623
624 __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV);
625 rp2_uart_set_mctrl(&up->port, 0);
626
627 writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO);
628 rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m,
629 RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232);
630 rp2_rmw_set(up, RP2_TXRX_CTL,
631 RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m);
632}
633
634static void rp2_remove_ports(struct rp2_card *card)
635{
636 int i;
637
638 for (i = 0; i < card->initialized_ports; i++)
639 uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port);
640 card->initialized_ports = 0;
641}
642
643static int rp2_load_firmware(struct rp2_card *card, const struct firmware *fw)
644{
645 resource_size_t phys_base;
646 int i, rc = 0;
647
648 phys_base = pci_resource_start(card->pdev, 1);
649
650 for (i = 0; i < card->n_ports; i++) {
651 struct rp2_uart_port *rp = &card->ports[i];
652 struct uart_port *p;
653 int j = (unsigned)i % PORTS_PER_ASIC;
654
655 rp->asic_base = card->bar1;
656 rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING;
657 rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING;
658 rp->card = card;
659 rp->idx = j;
660
661 p = &rp->port;
662 p->line = card->minor_start + i;
663 p->dev = &card->pdev->dev;
664 p->type = PORT_RP2;
665 p->iotype = UPIO_MEM32;
666 p->uartclk = UART_CLOCK;
667 p->regshift = 2;
668 p->fifosize = FIFO_SIZE;
669 p->ops = &rp2_uart_ops;
670 p->irq = card->pdev->irq;
671 p->membase = rp->base;
672 p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING;
673
674 if (i >= PORTS_PER_ASIC) {
675 rp->asic_base += RP2_ASIC_SPACING;
676 rp->base += RP2_ASIC_SPACING;
677 rp->ucode += RP2_ASIC_SPACING;
678 p->mapbase += RP2_ASIC_SPACING;
679 }
680
681 rp2_init_port(rp, fw);
682 rc = uart_add_one_port(&rp2_uart_driver, p);
683 if (rc) {
684 dev_err(&card->pdev->dev,
685 "error registering port %d: %d\n", i, rc);
686 rp2_remove_ports(card);
687 break;
688 }
689 card->initialized_ports++;
690 }
691
692 return rc;
693}
694
695static int rp2_probe(struct pci_dev *pdev,
696 const struct pci_device_id *id)
697{
698 const struct firmware *fw;
699 struct rp2_card *card;
700 struct rp2_uart_port *ports;
701 void __iomem * const *bars;
702 int rc;
703
704 card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
705 if (!card)
706 return -ENOMEM;
707 pci_set_drvdata(pdev, card);
708 spin_lock_init(&card->card_lock);
709
710 rc = pcim_enable_device(pdev);
711 if (rc)
712 return rc;
713
714 rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME);
715 if (rc)
716 return rc;
717
718 bars = pcim_iomap_table(pdev);
719 card->bar0 = bars[0];
720 card->bar1 = bars[1];
721 card->pdev = pdev;
722
723 rp2_decode_cap(id, &card->n_ports, &card->smpte);
724 dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports);
725
726 card->minor_start = rp2_alloc_ports(card->n_ports);
727 if (card->minor_start < 0) {
728 dev_err(&pdev->dev,
729 "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n");
730 return -EINVAL;
731 }
732
733 rp2_init_card(card);
734
735 ports = devm_kcalloc(&pdev->dev, card->n_ports, sizeof(*ports),
736 GFP_KERNEL);
737 if (!ports)
738 return -ENOMEM;
739 card->ports = ports;
740
741 rc = request_firmware(&fw, RP2_FW_NAME, &pdev->dev);
742 if (rc < 0) {
743 dev_err(&pdev->dev, "cannot find '%s' firmware image\n",
744 RP2_FW_NAME);
745 return rc;
746 }
747
748 rc = rp2_load_firmware(card, fw);
749
750 release_firmware(fw);
751 if (rc < 0)
752 return rc;
753
754 rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
755 IRQF_SHARED, DRV_NAME, card);
756 if (rc)
757 return rc;
758
759 return 0;
760}
761
762static void rp2_remove(struct pci_dev *pdev)
763{
764 struct rp2_card *card = pci_get_drvdata(pdev);
765
766 rp2_remove_ports(card);
767}
768
769static const struct pci_device_id rp2_pci_tbl[] = {
770
771 /* RocketPort INFINITY cards */
772
773 { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */
774 { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */
775 { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */
776 { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */
777 { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */
778 { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */
779 { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */
780 { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */
781 { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */
782 { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */
783 { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */
784 { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */
785 { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */
786 { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */
787 { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */
788 { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */
789 { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */
790
791 /* RocketPort EXPRESS cards */
792
793 { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */
794 { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */
795 { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */
796 { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */
797 { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */
798 { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */
799 { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */
800 { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */
801 { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */
802 { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */
803 { }
804};
805MODULE_DEVICE_TABLE(pci, rp2_pci_tbl);
806
807static struct pci_driver rp2_pci_driver = {
808 .name = DRV_NAME,
809 .id_table = rp2_pci_tbl,
810 .probe = rp2_probe,
811 .remove = rp2_remove,
812};
813
814static int __init rp2_uart_init(void)
815{
816 int rc;
817
818 rc = uart_register_driver(&rp2_uart_driver);
819 if (rc)
820 return rc;
821
822 rc = pci_register_driver(&rp2_pci_driver);
823 if (rc) {
824 uart_unregister_driver(&rp2_uart_driver);
825 return rc;
826 }
827
828 return 0;
829}
830
831static void __exit rp2_uart_exit(void)
832{
833 pci_unregister_driver(&rp2_pci_driver);
834 uart_unregister_driver(&rp2_uart_driver);
835}
836
837module_init(rp2_uart_init);
838module_exit(rp2_uart_exit);
839
840MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver");
841MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
842MODULE_LICENSE("GPL v2");
843MODULE_FIRMWARE(RP2_FW_NAME);
1/*
2 * Driver for Comtrol RocketPort EXPRESS/INFINITY cards
3 *
4 * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
5 *
6 * Inspired by, and loosely based on:
7 *
8 * ar933x_uart.c
9 * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
10 *
11 * rocketport_infinity_express-linux-1.20.tar.gz
12 * Copyright (C) 2004-2011 Comtrol, Inc.
13 *
14 * This program is free software; you can redistribute it and/or modify it
15 * under the terms of the GNU General Public License version 2 as published
16 * by the Free Software Foundation.
17 */
18
19#include <linux/bitops.h>
20#include <linux/compiler.h>
21#include <linux/completion.h>
22#include <linux/console.h>
23#include <linux/delay.h>
24#include <linux/firmware.h>
25#include <linux/init.h>
26#include <linux/io.h>
27#include <linux/ioport.h>
28#include <linux/irq.h>
29#include <linux/kernel.h>
30#include <linux/log2.h>
31#include <linux/module.h>
32#include <linux/pci.h>
33#include <linux/serial.h>
34#include <linux/serial_core.h>
35#include <linux/slab.h>
36#include <linux/sysrq.h>
37#include <linux/tty.h>
38#include <linux/tty_flip.h>
39#include <linux/types.h>
40
41#define DRV_NAME "rp2"
42
43#define RP2_FW_NAME "rp2.fw"
44#define RP2_UCODE_BYTES 0x3f
45
46#define PORTS_PER_ASIC 16
47#define ALL_PORTS_MASK (BIT(PORTS_PER_ASIC) - 1)
48
49#define UART_CLOCK 44236800
50#define DEFAULT_BAUD_DIV (UART_CLOCK / (9600 * 16))
51#define FIFO_SIZE 512
52
53/* BAR0 registers */
54#define RP2_FPGA_CTL0 0x110
55#define RP2_FPGA_CTL1 0x11c
56#define RP2_IRQ_MASK 0x1ec
57#define RP2_IRQ_MASK_EN_m BIT(0)
58#define RP2_IRQ_STATUS 0x1f0
59
60/* BAR1 registers */
61#define RP2_ASIC_SPACING 0x1000
62#define RP2_ASIC_OFFSET(i) ((i) << ilog2(RP2_ASIC_SPACING))
63
64#define RP2_PORT_BASE 0x000
65#define RP2_PORT_SPACING 0x040
66
67#define RP2_UCODE_BASE 0x400
68#define RP2_UCODE_SPACING 0x80
69
70#define RP2_CLK_PRESCALER 0xc00
71#define RP2_CH_IRQ_STAT 0xc04
72#define RP2_CH_IRQ_MASK 0xc08
73#define RP2_ASIC_IRQ 0xd00
74#define RP2_ASIC_IRQ_EN_m BIT(20)
75#define RP2_GLOBAL_CMD 0xd0c
76#define RP2_ASIC_CFG 0xd04
77
78/* port registers */
79#define RP2_DATA_DWORD 0x000
80
81#define RP2_DATA_BYTE 0x008
82#define RP2_DATA_BYTE_ERR_PARITY_m BIT(8)
83#define RP2_DATA_BYTE_ERR_OVERRUN_m BIT(9)
84#define RP2_DATA_BYTE_ERR_FRAMING_m BIT(10)
85#define RP2_DATA_BYTE_BREAK_m BIT(11)
86
87/* This lets uart_insert_char() drop bytes received on a !CREAD port */
88#define RP2_DUMMY_READ BIT(16)
89
90#define RP2_DATA_BYTE_EXCEPTION_MASK (RP2_DATA_BYTE_ERR_PARITY_m | \
91 RP2_DATA_BYTE_ERR_OVERRUN_m | \
92 RP2_DATA_BYTE_ERR_FRAMING_m | \
93 RP2_DATA_BYTE_BREAK_m)
94
95#define RP2_RX_FIFO_COUNT 0x00c
96#define RP2_TX_FIFO_COUNT 0x00e
97
98#define RP2_CHAN_STAT 0x010
99#define RP2_CHAN_STAT_RXDATA_m BIT(0)
100#define RP2_CHAN_STAT_DCD_m BIT(3)
101#define RP2_CHAN_STAT_DSR_m BIT(4)
102#define RP2_CHAN_STAT_CTS_m BIT(5)
103#define RP2_CHAN_STAT_RI_m BIT(6)
104#define RP2_CHAN_STAT_OVERRUN_m BIT(13)
105#define RP2_CHAN_STAT_DSR_CHANGED_m BIT(16)
106#define RP2_CHAN_STAT_CTS_CHANGED_m BIT(17)
107#define RP2_CHAN_STAT_CD_CHANGED_m BIT(18)
108#define RP2_CHAN_STAT_RI_CHANGED_m BIT(22)
109#define RP2_CHAN_STAT_TXEMPTY_m BIT(25)
110
111#define RP2_CHAN_STAT_MS_CHANGED_MASK (RP2_CHAN_STAT_DSR_CHANGED_m | \
112 RP2_CHAN_STAT_CTS_CHANGED_m | \
113 RP2_CHAN_STAT_CD_CHANGED_m | \
114 RP2_CHAN_STAT_RI_CHANGED_m)
115
116#define RP2_TXRX_CTL 0x014
117#define RP2_TXRX_CTL_MSRIRQ_m BIT(0)
118#define RP2_TXRX_CTL_RXIRQ_m BIT(2)
119#define RP2_TXRX_CTL_RX_TRIG_s 3
120#define RP2_TXRX_CTL_RX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
121#define RP2_TXRX_CTL_RX_TRIG_1 (0x1 << RP2_TXRX_CTL_RX_TRIG_s)
122#define RP2_TXRX_CTL_RX_TRIG_256 (0x2 << RP2_TXRX_CTL_RX_TRIG_s)
123#define RP2_TXRX_CTL_RX_TRIG_448 (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
124#define RP2_TXRX_CTL_RX_EN_m BIT(5)
125#define RP2_TXRX_CTL_RTSFLOW_m BIT(6)
126#define RP2_TXRX_CTL_DTRFLOW_m BIT(7)
127#define RP2_TXRX_CTL_TX_TRIG_s 16
128#define RP2_TXRX_CTL_TX_TRIG_m (0x3 << RP2_TXRX_CTL_RX_TRIG_s)
129#define RP2_TXRX_CTL_DSRFLOW_m BIT(18)
130#define RP2_TXRX_CTL_TXIRQ_m BIT(19)
131#define RP2_TXRX_CTL_CTSFLOW_m BIT(23)
132#define RP2_TXRX_CTL_TX_EN_m BIT(24)
133#define RP2_TXRX_CTL_RTS_m BIT(25)
134#define RP2_TXRX_CTL_DTR_m BIT(26)
135#define RP2_TXRX_CTL_LOOP_m BIT(27)
136#define RP2_TXRX_CTL_BREAK_m BIT(28)
137#define RP2_TXRX_CTL_CMSPAR_m BIT(29)
138#define RP2_TXRX_CTL_nPARODD_m BIT(30)
139#define RP2_TXRX_CTL_PARENB_m BIT(31)
140
141#define RP2_UART_CTL 0x018
142#define RP2_UART_CTL_MODE_s 0
143#define RP2_UART_CTL_MODE_m (0x7 << RP2_UART_CTL_MODE_s)
144#define RP2_UART_CTL_MODE_rs232 (0x1 << RP2_UART_CTL_MODE_s)
145#define RP2_UART_CTL_FLUSH_RX_m BIT(3)
146#define RP2_UART_CTL_FLUSH_TX_m BIT(4)
147#define RP2_UART_CTL_RESET_CH_m BIT(5)
148#define RP2_UART_CTL_XMIT_EN_m BIT(6)
149#define RP2_UART_CTL_DATABITS_s 8
150#define RP2_UART_CTL_DATABITS_m (0x3 << RP2_UART_CTL_DATABITS_s)
151#define RP2_UART_CTL_DATABITS_8 (0x3 << RP2_UART_CTL_DATABITS_s)
152#define RP2_UART_CTL_DATABITS_7 (0x2 << RP2_UART_CTL_DATABITS_s)
153#define RP2_UART_CTL_DATABITS_6 (0x1 << RP2_UART_CTL_DATABITS_s)
154#define RP2_UART_CTL_DATABITS_5 (0x0 << RP2_UART_CTL_DATABITS_s)
155#define RP2_UART_CTL_STOPBITS_m BIT(10)
156
157#define RP2_BAUD 0x01c
158
159/* ucode registers */
160#define RP2_TX_SWFLOW 0x02
161#define RP2_TX_SWFLOW_ena 0x81
162#define RP2_TX_SWFLOW_dis 0x9d
163
164#define RP2_RX_SWFLOW 0x0c
165#define RP2_RX_SWFLOW_ena 0x81
166#define RP2_RX_SWFLOW_dis 0x8d
167
168#define RP2_RX_FIFO 0x37
169#define RP2_RX_FIFO_ena 0x08
170#define RP2_RX_FIFO_dis 0x81
171
172static struct uart_driver rp2_uart_driver = {
173 .owner = THIS_MODULE,
174 .driver_name = DRV_NAME,
175 .dev_name = "ttyRP",
176 .nr = CONFIG_SERIAL_RP2_NR_UARTS,
177};
178
179struct rp2_card;
180
181struct rp2_uart_port {
182 struct uart_port port;
183 int idx;
184 int ignore_rx;
185 struct rp2_card *card;
186 void __iomem *asic_base;
187 void __iomem *base;
188 void __iomem *ucode;
189};
190
191struct rp2_card {
192 struct pci_dev *pdev;
193 struct rp2_uart_port *ports;
194 int n_ports;
195 int initialized_ports;
196 int minor_start;
197 int smpte;
198 void __iomem *bar0;
199 void __iomem *bar1;
200 spinlock_t card_lock;
201 struct completion fw_loaded;
202};
203
204#define RP_ID(prod) PCI_VDEVICE(RP, (prod))
205#define RP_CAP(ports, smpte) (((ports) << 8) | ((smpte) << 0))
206
207static inline void rp2_decode_cap(const struct pci_device_id *id,
208 int *ports, int *smpte)
209{
210 *ports = id->driver_data >> 8;
211 *smpte = id->driver_data & 0xff;
212}
213
214static DEFINE_SPINLOCK(rp2_minor_lock);
215static int rp2_minor_next;
216
217static int rp2_alloc_ports(int n_ports)
218{
219 int ret = -ENOSPC;
220
221 spin_lock(&rp2_minor_lock);
222 if (rp2_minor_next + n_ports <= CONFIG_SERIAL_RP2_NR_UARTS) {
223 /* sorry, no support for hot unplugging individual cards */
224 ret = rp2_minor_next;
225 rp2_minor_next += n_ports;
226 }
227 spin_unlock(&rp2_minor_lock);
228
229 return ret;
230}
231
232static inline struct rp2_uart_port *port_to_up(struct uart_port *port)
233{
234 return container_of(port, struct rp2_uart_port, port);
235}
236
237static void rp2_rmw(struct rp2_uart_port *up, int reg,
238 u32 clr_bits, u32 set_bits)
239{
240 u32 tmp = readl(up->base + reg);
241 tmp &= ~clr_bits;
242 tmp |= set_bits;
243 writel(tmp, up->base + reg);
244}
245
246static void rp2_rmw_clr(struct rp2_uart_port *up, int reg, u32 val)
247{
248 rp2_rmw(up, reg, val, 0);
249}
250
251static void rp2_rmw_set(struct rp2_uart_port *up, int reg, u32 val)
252{
253 rp2_rmw(up, reg, 0, val);
254}
255
256static void rp2_mask_ch_irq(struct rp2_uart_port *up, int ch_num,
257 int is_enabled)
258{
259 unsigned long flags, irq_mask;
260
261 spin_lock_irqsave(&up->card->card_lock, flags);
262
263 irq_mask = readl(up->asic_base + RP2_CH_IRQ_MASK);
264 if (is_enabled)
265 irq_mask &= ~BIT(ch_num);
266 else
267 irq_mask |= BIT(ch_num);
268 writel(irq_mask, up->asic_base + RP2_CH_IRQ_MASK);
269
270 spin_unlock_irqrestore(&up->card->card_lock, flags);
271}
272
273static unsigned int rp2_uart_tx_empty(struct uart_port *port)
274{
275 struct rp2_uart_port *up = port_to_up(port);
276 unsigned long tx_fifo_bytes, flags;
277
278 /*
279 * This should probably check the transmitter, not the FIFO.
280 * But the TXEMPTY bit doesn't seem to work unless the TX IRQ is
281 * enabled.
282 */
283 spin_lock_irqsave(&up->port.lock, flags);
284 tx_fifo_bytes = readw(up->base + RP2_TX_FIFO_COUNT);
285 spin_unlock_irqrestore(&up->port.lock, flags);
286
287 return tx_fifo_bytes ? 0 : TIOCSER_TEMT;
288}
289
290static unsigned int rp2_uart_get_mctrl(struct uart_port *port)
291{
292 struct rp2_uart_port *up = port_to_up(port);
293 u32 status;
294
295 status = readl(up->base + RP2_CHAN_STAT);
296 return ((status & RP2_CHAN_STAT_DCD_m) ? TIOCM_CAR : 0) |
297 ((status & RP2_CHAN_STAT_DSR_m) ? TIOCM_DSR : 0) |
298 ((status & RP2_CHAN_STAT_CTS_m) ? TIOCM_CTS : 0) |
299 ((status & RP2_CHAN_STAT_RI_m) ? TIOCM_RI : 0);
300}
301
302static void rp2_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
303{
304 rp2_rmw(port_to_up(port), RP2_TXRX_CTL,
305 RP2_TXRX_CTL_DTR_m | RP2_TXRX_CTL_RTS_m | RP2_TXRX_CTL_LOOP_m,
306 ((mctrl & TIOCM_DTR) ? RP2_TXRX_CTL_DTR_m : 0) |
307 ((mctrl & TIOCM_RTS) ? RP2_TXRX_CTL_RTS_m : 0) |
308 ((mctrl & TIOCM_LOOP) ? RP2_TXRX_CTL_LOOP_m : 0));
309}
310
311static void rp2_uart_start_tx(struct uart_port *port)
312{
313 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
314}
315
316static void rp2_uart_stop_tx(struct uart_port *port)
317{
318 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_TXIRQ_m);
319}
320
321static void rp2_uart_stop_rx(struct uart_port *port)
322{
323 rp2_rmw_clr(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_RXIRQ_m);
324}
325
326static void rp2_uart_break_ctl(struct uart_port *port, int break_state)
327{
328 unsigned long flags;
329
330 spin_lock_irqsave(&port->lock, flags);
331 rp2_rmw(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_BREAK_m,
332 break_state ? RP2_TXRX_CTL_BREAK_m : 0);
333 spin_unlock_irqrestore(&port->lock, flags);
334}
335
336static void rp2_uart_enable_ms(struct uart_port *port)
337{
338 rp2_rmw_set(port_to_up(port), RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m);
339}
340
341static void __rp2_uart_set_termios(struct rp2_uart_port *up,
342 unsigned long cfl,
343 unsigned long ifl,
344 unsigned int baud_div)
345{
346 /* baud rate divisor (calculated elsewhere). 0 = divide-by-1 */
347 writew(baud_div - 1, up->base + RP2_BAUD);
348
349 /* data bits and stop bits */
350 rp2_rmw(up, RP2_UART_CTL,
351 RP2_UART_CTL_STOPBITS_m | RP2_UART_CTL_DATABITS_m,
352 ((cfl & CSTOPB) ? RP2_UART_CTL_STOPBITS_m : 0) |
353 (((cfl & CSIZE) == CS8) ? RP2_UART_CTL_DATABITS_8 : 0) |
354 (((cfl & CSIZE) == CS7) ? RP2_UART_CTL_DATABITS_7 : 0) |
355 (((cfl & CSIZE) == CS6) ? RP2_UART_CTL_DATABITS_6 : 0) |
356 (((cfl & CSIZE) == CS5) ? RP2_UART_CTL_DATABITS_5 : 0));
357
358 /* parity and hardware flow control */
359 rp2_rmw(up, RP2_TXRX_CTL,
360 RP2_TXRX_CTL_PARENB_m | RP2_TXRX_CTL_nPARODD_m |
361 RP2_TXRX_CTL_CMSPAR_m | RP2_TXRX_CTL_DTRFLOW_m |
362 RP2_TXRX_CTL_DSRFLOW_m | RP2_TXRX_CTL_RTSFLOW_m |
363 RP2_TXRX_CTL_CTSFLOW_m,
364 ((cfl & PARENB) ? RP2_TXRX_CTL_PARENB_m : 0) |
365 ((cfl & PARODD) ? 0 : RP2_TXRX_CTL_nPARODD_m) |
366 ((cfl & CMSPAR) ? RP2_TXRX_CTL_CMSPAR_m : 0) |
367 ((cfl & CRTSCTS) ? (RP2_TXRX_CTL_RTSFLOW_m |
368 RP2_TXRX_CTL_CTSFLOW_m) : 0));
369
370 /* XON/XOFF software flow control */
371 writeb((ifl & IXON) ? RP2_TX_SWFLOW_ena : RP2_TX_SWFLOW_dis,
372 up->ucode + RP2_TX_SWFLOW);
373 writeb((ifl & IXOFF) ? RP2_RX_SWFLOW_ena : RP2_RX_SWFLOW_dis,
374 up->ucode + RP2_RX_SWFLOW);
375}
376
377static void rp2_uart_set_termios(struct uart_port *port,
378 struct ktermios *new,
379 struct ktermios *old)
380{
381 struct rp2_uart_port *up = port_to_up(port);
382 unsigned long flags;
383 unsigned int baud, baud_div;
384
385 baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
386 baud_div = uart_get_divisor(port, baud);
387
388 if (tty_termios_baud_rate(new))
389 tty_termios_encode_baud_rate(new, baud, baud);
390
391 spin_lock_irqsave(&port->lock, flags);
392
393 /* ignore all characters if CREAD is not set */
394 port->ignore_status_mask = (new->c_cflag & CREAD) ? 0 : RP2_DUMMY_READ;
395
396 __rp2_uart_set_termios(up, new->c_cflag, new->c_iflag, baud_div);
397 uart_update_timeout(port, new->c_cflag, baud);
398
399 spin_unlock_irqrestore(&port->lock, flags);
400}
401
402static void rp2_rx_chars(struct rp2_uart_port *up)
403{
404 u16 bytes = readw(up->base + RP2_RX_FIFO_COUNT);
405 struct tty_port *port = &up->port.state->port;
406
407 for (; bytes != 0; bytes--) {
408 u32 byte = readw(up->base + RP2_DATA_BYTE) | RP2_DUMMY_READ;
409 char ch = byte & 0xff;
410
411 if (likely(!(byte & RP2_DATA_BYTE_EXCEPTION_MASK))) {
412 if (!uart_handle_sysrq_char(&up->port, ch))
413 uart_insert_char(&up->port, byte, 0, ch,
414 TTY_NORMAL);
415 } else {
416 char flag = TTY_NORMAL;
417
418 if (byte & RP2_DATA_BYTE_BREAK_m)
419 flag = TTY_BREAK;
420 else if (byte & RP2_DATA_BYTE_ERR_FRAMING_m)
421 flag = TTY_FRAME;
422 else if (byte & RP2_DATA_BYTE_ERR_PARITY_m)
423 flag = TTY_PARITY;
424 uart_insert_char(&up->port, byte,
425 RP2_DATA_BYTE_ERR_OVERRUN_m, ch, flag);
426 }
427 up->port.icount.rx++;
428 }
429
430 spin_unlock(&up->port.lock);
431 tty_flip_buffer_push(port);
432 spin_lock(&up->port.lock);
433}
434
435static void rp2_tx_chars(struct rp2_uart_port *up)
436{
437 u16 max_tx = FIFO_SIZE - readw(up->base + RP2_TX_FIFO_COUNT);
438 struct circ_buf *xmit = &up->port.state->xmit;
439
440 if (uart_tx_stopped(&up->port)) {
441 rp2_uart_stop_tx(&up->port);
442 return;
443 }
444
445 for (; max_tx != 0; max_tx--) {
446 if (up->port.x_char) {
447 writeb(up->port.x_char, up->base + RP2_DATA_BYTE);
448 up->port.x_char = 0;
449 up->port.icount.tx++;
450 continue;
451 }
452 if (uart_circ_empty(xmit)) {
453 rp2_uart_stop_tx(&up->port);
454 break;
455 }
456 writeb(xmit->buf[xmit->tail], up->base + RP2_DATA_BYTE);
457 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
458 up->port.icount.tx++;
459 }
460
461 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
462 uart_write_wakeup(&up->port);
463}
464
465static void rp2_ch_interrupt(struct rp2_uart_port *up)
466{
467 u32 status;
468
469 spin_lock(&up->port.lock);
470
471 /*
472 * The IRQ status bits are clear-on-write. Other status bits in
473 * this register aren't, so it's harmless to write to them.
474 */
475 status = readl(up->base + RP2_CHAN_STAT);
476 writel(status, up->base + RP2_CHAN_STAT);
477
478 if (status & RP2_CHAN_STAT_RXDATA_m)
479 rp2_rx_chars(up);
480 if (status & RP2_CHAN_STAT_TXEMPTY_m)
481 rp2_tx_chars(up);
482 if (status & RP2_CHAN_STAT_MS_CHANGED_MASK)
483 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
484
485 spin_unlock(&up->port.lock);
486}
487
488static int rp2_asic_interrupt(struct rp2_card *card, unsigned int asic_id)
489{
490 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
491 int ch, handled = 0;
492 unsigned long status = readl(base + RP2_CH_IRQ_STAT) &
493 ~readl(base + RP2_CH_IRQ_MASK);
494
495 for_each_set_bit(ch, &status, PORTS_PER_ASIC) {
496 rp2_ch_interrupt(&card->ports[ch]);
497 handled++;
498 }
499 return handled;
500}
501
502static irqreturn_t rp2_uart_interrupt(int irq, void *dev_id)
503{
504 struct rp2_card *card = dev_id;
505 int handled;
506
507 handled = rp2_asic_interrupt(card, 0);
508 if (card->n_ports >= PORTS_PER_ASIC)
509 handled += rp2_asic_interrupt(card, 1);
510
511 return handled ? IRQ_HANDLED : IRQ_NONE;
512}
513
514static inline void rp2_flush_fifos(struct rp2_uart_port *up)
515{
516 rp2_rmw_set(up, RP2_UART_CTL,
517 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
518 readl(up->base + RP2_UART_CTL);
519 udelay(10);
520 rp2_rmw_clr(up, RP2_UART_CTL,
521 RP2_UART_CTL_FLUSH_RX_m | RP2_UART_CTL_FLUSH_TX_m);
522}
523
524static int rp2_uart_startup(struct uart_port *port)
525{
526 struct rp2_uart_port *up = port_to_up(port);
527
528 rp2_flush_fifos(up);
529 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_MSRIRQ_m, RP2_TXRX_CTL_RXIRQ_m);
530 rp2_rmw(up, RP2_TXRX_CTL, RP2_TXRX_CTL_RX_TRIG_m,
531 RP2_TXRX_CTL_RX_TRIG_1);
532 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
533 rp2_mask_ch_irq(up, up->idx, 1);
534
535 return 0;
536}
537
538static void rp2_uart_shutdown(struct uart_port *port)
539{
540 struct rp2_uart_port *up = port_to_up(port);
541 unsigned long flags;
542
543 rp2_uart_break_ctl(port, 0);
544
545 spin_lock_irqsave(&port->lock, flags);
546 rp2_mask_ch_irq(up, up->idx, 0);
547 rp2_rmw(up, RP2_CHAN_STAT, 0, 0);
548 spin_unlock_irqrestore(&port->lock, flags);
549}
550
551static const char *rp2_uart_type(struct uart_port *port)
552{
553 return (port->type == PORT_RP2) ? "RocketPort 2 UART" : NULL;
554}
555
556static void rp2_uart_release_port(struct uart_port *port)
557{
558 /* Nothing to release ... */
559}
560
561static int rp2_uart_request_port(struct uart_port *port)
562{
563 /* UARTs always present */
564 return 0;
565}
566
567static void rp2_uart_config_port(struct uart_port *port, int flags)
568{
569 if (flags & UART_CONFIG_TYPE)
570 port->type = PORT_RP2;
571}
572
573static int rp2_uart_verify_port(struct uart_port *port,
574 struct serial_struct *ser)
575{
576 if (ser->type != PORT_UNKNOWN && ser->type != PORT_RP2)
577 return -EINVAL;
578
579 return 0;
580}
581
582static const struct uart_ops rp2_uart_ops = {
583 .tx_empty = rp2_uart_tx_empty,
584 .set_mctrl = rp2_uart_set_mctrl,
585 .get_mctrl = rp2_uart_get_mctrl,
586 .stop_tx = rp2_uart_stop_tx,
587 .start_tx = rp2_uart_start_tx,
588 .stop_rx = rp2_uart_stop_rx,
589 .enable_ms = rp2_uart_enable_ms,
590 .break_ctl = rp2_uart_break_ctl,
591 .startup = rp2_uart_startup,
592 .shutdown = rp2_uart_shutdown,
593 .set_termios = rp2_uart_set_termios,
594 .type = rp2_uart_type,
595 .release_port = rp2_uart_release_port,
596 .request_port = rp2_uart_request_port,
597 .config_port = rp2_uart_config_port,
598 .verify_port = rp2_uart_verify_port,
599};
600
601static void rp2_reset_asic(struct rp2_card *card, unsigned int asic_id)
602{
603 void __iomem *base = card->bar1 + RP2_ASIC_OFFSET(asic_id);
604 u32 clk_cfg;
605
606 writew(1, base + RP2_GLOBAL_CMD);
607 readw(base + RP2_GLOBAL_CMD);
608 msleep(100);
609 writel(0, base + RP2_CLK_PRESCALER);
610
611 /* TDM clock configuration */
612 clk_cfg = readw(base + RP2_ASIC_CFG);
613 clk_cfg = (clk_cfg & ~BIT(8)) | BIT(9);
614 writew(clk_cfg, base + RP2_ASIC_CFG);
615
616 /* IRQ routing */
617 writel(ALL_PORTS_MASK, base + RP2_CH_IRQ_MASK);
618 writel(RP2_ASIC_IRQ_EN_m, base + RP2_ASIC_IRQ);
619}
620
621static void rp2_init_card(struct rp2_card *card)
622{
623 writel(4, card->bar0 + RP2_FPGA_CTL0);
624 writel(0, card->bar0 + RP2_FPGA_CTL1);
625
626 rp2_reset_asic(card, 0);
627 if (card->n_ports >= PORTS_PER_ASIC)
628 rp2_reset_asic(card, 1);
629
630 writel(RP2_IRQ_MASK_EN_m, card->bar0 + RP2_IRQ_MASK);
631}
632
633static void rp2_init_port(struct rp2_uart_port *up, const struct firmware *fw)
634{
635 int i;
636
637 writel(RP2_UART_CTL_RESET_CH_m, up->base + RP2_UART_CTL);
638 readl(up->base + RP2_UART_CTL);
639 udelay(1);
640
641 writel(0, up->base + RP2_TXRX_CTL);
642 writel(0, up->base + RP2_UART_CTL);
643 readl(up->base + RP2_UART_CTL);
644 udelay(1);
645
646 rp2_flush_fifos(up);
647
648 for (i = 0; i < min_t(int, fw->size, RP2_UCODE_BYTES); i++)
649 writeb(fw->data[i], up->ucode + i);
650
651 __rp2_uart_set_termios(up, CS8 | CREAD | CLOCAL, 0, DEFAULT_BAUD_DIV);
652 rp2_uart_set_mctrl(&up->port, 0);
653
654 writeb(RP2_RX_FIFO_ena, up->ucode + RP2_RX_FIFO);
655 rp2_rmw(up, RP2_UART_CTL, RP2_UART_CTL_MODE_m,
656 RP2_UART_CTL_XMIT_EN_m | RP2_UART_CTL_MODE_rs232);
657 rp2_rmw_set(up, RP2_TXRX_CTL,
658 RP2_TXRX_CTL_TX_EN_m | RP2_TXRX_CTL_RX_EN_m);
659}
660
661static void rp2_remove_ports(struct rp2_card *card)
662{
663 int i;
664
665 for (i = 0; i < card->initialized_ports; i++)
666 uart_remove_one_port(&rp2_uart_driver, &card->ports[i].port);
667 card->initialized_ports = 0;
668}
669
670static void rp2_fw_cb(const struct firmware *fw, void *context)
671{
672 struct rp2_card *card = context;
673 resource_size_t phys_base;
674 int i, rc = -ENOENT;
675
676 if (!fw) {
677 dev_err(&card->pdev->dev, "cannot find '%s' firmware image\n",
678 RP2_FW_NAME);
679 goto no_fw;
680 }
681
682 phys_base = pci_resource_start(card->pdev, 1);
683
684 for (i = 0; i < card->n_ports; i++) {
685 struct rp2_uart_port *rp = &card->ports[i];
686 struct uart_port *p;
687 int j = (unsigned)i % PORTS_PER_ASIC;
688
689 rp->asic_base = card->bar1;
690 rp->base = card->bar1 + RP2_PORT_BASE + j*RP2_PORT_SPACING;
691 rp->ucode = card->bar1 + RP2_UCODE_BASE + j*RP2_UCODE_SPACING;
692 rp->card = card;
693 rp->idx = j;
694
695 p = &rp->port;
696 p->line = card->minor_start + i;
697 p->dev = &card->pdev->dev;
698 p->type = PORT_RP2;
699 p->iotype = UPIO_MEM32;
700 p->uartclk = UART_CLOCK;
701 p->regshift = 2;
702 p->fifosize = FIFO_SIZE;
703 p->ops = &rp2_uart_ops;
704 p->irq = card->pdev->irq;
705 p->membase = rp->base;
706 p->mapbase = phys_base + RP2_PORT_BASE + j*RP2_PORT_SPACING;
707
708 if (i >= PORTS_PER_ASIC) {
709 rp->asic_base += RP2_ASIC_SPACING;
710 rp->base += RP2_ASIC_SPACING;
711 rp->ucode += RP2_ASIC_SPACING;
712 p->mapbase += RP2_ASIC_SPACING;
713 }
714
715 rp2_init_port(rp, fw);
716 rc = uart_add_one_port(&rp2_uart_driver, p);
717 if (rc) {
718 dev_err(&card->pdev->dev,
719 "error registering port %d: %d\n", i, rc);
720 rp2_remove_ports(card);
721 break;
722 }
723 card->initialized_ports++;
724 }
725
726 release_firmware(fw);
727no_fw:
728 /*
729 * rp2_fw_cb() is called from a workqueue long after rp2_probe()
730 * has already returned success. So if something failed here,
731 * we'll just leave the now-dormant device in place until somebody
732 * unbinds it.
733 */
734 if (rc)
735 dev_warn(&card->pdev->dev, "driver initialization failed\n");
736
737 complete(&card->fw_loaded);
738}
739
740static int rp2_probe(struct pci_dev *pdev,
741 const struct pci_device_id *id)
742{
743 struct rp2_card *card;
744 struct rp2_uart_port *ports;
745 void __iomem * const *bars;
746 int rc;
747
748 card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
749 if (!card)
750 return -ENOMEM;
751 pci_set_drvdata(pdev, card);
752 spin_lock_init(&card->card_lock);
753 init_completion(&card->fw_loaded);
754
755 rc = pcim_enable_device(pdev);
756 if (rc)
757 return rc;
758
759 rc = pcim_iomap_regions_request_all(pdev, 0x03, DRV_NAME);
760 if (rc)
761 return rc;
762
763 bars = pcim_iomap_table(pdev);
764 card->bar0 = bars[0];
765 card->bar1 = bars[1];
766 card->pdev = pdev;
767
768 rp2_decode_cap(id, &card->n_ports, &card->smpte);
769 dev_info(&pdev->dev, "found new card with %d ports\n", card->n_ports);
770
771 card->minor_start = rp2_alloc_ports(card->n_ports);
772 if (card->minor_start < 0) {
773 dev_err(&pdev->dev,
774 "too many ports (try increasing CONFIG_SERIAL_RP2_NR_UARTS)\n");
775 return -EINVAL;
776 }
777
778 rp2_init_card(card);
779
780 ports = devm_kzalloc(&pdev->dev, sizeof(*ports) * card->n_ports,
781 GFP_KERNEL);
782 if (!ports)
783 return -ENOMEM;
784 card->ports = ports;
785
786 rc = devm_request_irq(&pdev->dev, pdev->irq, rp2_uart_interrupt,
787 IRQF_SHARED, DRV_NAME, card);
788 if (rc)
789 return rc;
790
791 /*
792 * Only catastrophic errors (e.g. ENOMEM) are reported here.
793 * If the FW image is missing, we'll find out in rp2_fw_cb()
794 * and print an error message.
795 */
796 rc = request_firmware_nowait(THIS_MODULE, 1, RP2_FW_NAME, &pdev->dev,
797 GFP_KERNEL, card, rp2_fw_cb);
798 if (rc)
799 return rc;
800 dev_dbg(&pdev->dev, "waiting for firmware blob...\n");
801
802 return 0;
803}
804
805static void rp2_remove(struct pci_dev *pdev)
806{
807 struct rp2_card *card = pci_get_drvdata(pdev);
808
809 wait_for_completion(&card->fw_loaded);
810 rp2_remove_ports(card);
811}
812
813static const struct pci_device_id rp2_pci_tbl[] = {
814
815 /* RocketPort INFINITY cards */
816
817 { RP_ID(0x0040), RP_CAP(8, 0) }, /* INF Octa, RJ45, selectable */
818 { RP_ID(0x0041), RP_CAP(32, 0) }, /* INF 32, ext interface */
819 { RP_ID(0x0042), RP_CAP(8, 0) }, /* INF Octa, ext interface */
820 { RP_ID(0x0043), RP_CAP(16, 0) }, /* INF 16, ext interface */
821 { RP_ID(0x0044), RP_CAP(4, 0) }, /* INF Quad, DB, selectable */
822 { RP_ID(0x0045), RP_CAP(8, 0) }, /* INF Octa, DB, selectable */
823 { RP_ID(0x0046), RP_CAP(4, 0) }, /* INF Quad, ext interface */
824 { RP_ID(0x0047), RP_CAP(4, 0) }, /* INF Quad, RJ45 */
825 { RP_ID(0x004a), RP_CAP(4, 0) }, /* INF Plus, Quad */
826 { RP_ID(0x004b), RP_CAP(8, 0) }, /* INF Plus, Octa */
827 { RP_ID(0x004c), RP_CAP(8, 0) }, /* INF III, Octa */
828 { RP_ID(0x004d), RP_CAP(4, 0) }, /* INF III, Quad */
829 { RP_ID(0x004e), RP_CAP(2, 0) }, /* INF Plus, 2, RS232 */
830 { RP_ID(0x004f), RP_CAP(2, 1) }, /* INF Plus, 2, SMPTE */
831 { RP_ID(0x0050), RP_CAP(4, 0) }, /* INF Plus, Quad, RJ45 */
832 { RP_ID(0x0051), RP_CAP(8, 0) }, /* INF Plus, Octa, RJ45 */
833 { RP_ID(0x0052), RP_CAP(8, 1) }, /* INF Octa, SMPTE */
834
835 /* RocketPort EXPRESS cards */
836
837 { RP_ID(0x0060), RP_CAP(8, 0) }, /* EXP Octa, RJ45, selectable */
838 { RP_ID(0x0061), RP_CAP(32, 0) }, /* EXP 32, ext interface */
839 { RP_ID(0x0062), RP_CAP(8, 0) }, /* EXP Octa, ext interface */
840 { RP_ID(0x0063), RP_CAP(16, 0) }, /* EXP 16, ext interface */
841 { RP_ID(0x0064), RP_CAP(4, 0) }, /* EXP Quad, DB, selectable */
842 { RP_ID(0x0065), RP_CAP(8, 0) }, /* EXP Octa, DB, selectable */
843 { RP_ID(0x0066), RP_CAP(4, 0) }, /* EXP Quad, ext interface */
844 { RP_ID(0x0067), RP_CAP(4, 0) }, /* EXP Quad, RJ45 */
845 { RP_ID(0x0068), RP_CAP(8, 0) }, /* EXP Octa, RJ11 */
846 { RP_ID(0x0072), RP_CAP(8, 1) }, /* EXP Octa, SMPTE */
847 { }
848};
849MODULE_DEVICE_TABLE(pci, rp2_pci_tbl);
850
851static struct pci_driver rp2_pci_driver = {
852 .name = DRV_NAME,
853 .id_table = rp2_pci_tbl,
854 .probe = rp2_probe,
855 .remove = rp2_remove,
856};
857
858static int __init rp2_uart_init(void)
859{
860 int rc;
861
862 rc = uart_register_driver(&rp2_uart_driver);
863 if (rc)
864 return rc;
865
866 rc = pci_register_driver(&rp2_pci_driver);
867 if (rc) {
868 uart_unregister_driver(&rp2_uart_driver);
869 return rc;
870 }
871
872 return 0;
873}
874
875static void __exit rp2_uart_exit(void)
876{
877 pci_unregister_driver(&rp2_pci_driver);
878 uart_unregister_driver(&rp2_uart_driver);
879}
880
881module_init(rp2_uart_init);
882module_exit(rp2_uart_exit);
883
884MODULE_DESCRIPTION("Comtrol RocketPort EXPRESS/INFINITY driver");
885MODULE_AUTHOR("Kevin Cernekee <cernekee@gmail.com>");
886MODULE_LICENSE("GPL v2");
887MODULE_FIRMWARE(RP2_FW_NAME);