Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
  4 *
  5 * Copyright (C) 2012 Texas Instruments
  6 * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
  7 *
  8 * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
  9 * Hemanth V <hemanthv@ti.com>
 10 *
 11 * Reference manual for the twl6030 is available at:
 12 * https://www.ti.com/lit/ds/symlink/twl6030.pdf
 
 13 *
 14 * Limitations:
 15 * - The twl6030 hardware only supports two period lengths (128 clock ticks and
 16 *   64 clock ticks), the driver only uses 128 ticks
 17 * - The hardware doesn't support ON = 0, so the active part of a period doesn't
 18 *   start at its beginning.
 19 * - The hardware could support inverted polarity (with a similar limitation as
 20 *   for normal: the last clock tick is always inactive).
 21 * - The hardware emits a constant low output when disabled.
 22 * - A request for .duty_cycle = 0 results in an output wave with one active
 23 *   clock tick per period. This should better use the disabled state.
 24 * - The driver only implements setting the relative duty cycle.
 25 * - The driver doesn't implement .get_state().
 26 */
 27
 28#include <linux/module.h>
 29#include <linux/of.h>
 30#include <linux/platform_device.h>
 31#include <linux/pwm.h>
 32#include <linux/mfd/twl.h>
 33#include <linux/slab.h>
 34
 35/*
 36 * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
 37 * To generate the signal on TWL4030:
 38 *  - LEDA uses PWMA
 39 *  - LEDB uses PWMB
 40 * TWL6030 has one LED pin with dedicated LEDPWM
 41 */
 42
 43#define TWL4030_LED_MAX		0x7f
 44#define TWL6030_LED_MAX		0xff
 45
 46/* Registers, bits and macro for TWL4030 */
 47#define TWL4030_LEDEN_REG	0x00
 48#define TWL4030_PWMA_REG	0x01
 49
 50#define TWL4030_LEDXON		(1 << 0)
 51#define TWL4030_LEDXPWM		(1 << 4)
 52#define TWL4030_LED_PINS	(TWL4030_LEDXON | TWL4030_LEDXPWM)
 53#define TWL4030_LED_TOGGLE(led, x)	((x) << (led))
 54
 55/* Register, bits and macro for TWL6030 */
 56#define TWL6030_LED_PWM_CTRL1	0xf4
 57#define TWL6030_LED_PWM_CTRL2	0xf5
 58
 59#define TWL6040_LED_MODE_HW	0x00
 60#define TWL6040_LED_MODE_ON	0x01
 61#define TWL6040_LED_MODE_OFF	0x02
 62#define TWL6040_LED_MODE_MASK	0x03
 63
 64struct twl_pwmled_chip {
 65	struct pwm_chip chip;
 66	struct mutex mutex;
 67};
 68
 69static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
 70{
 71	return container_of(chip, struct twl_pwmled_chip, chip);
 72}
 73
 74static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
 75			      int duty_ns, int period_ns)
 76{
 77	int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
 78	u8 pwm_config[2] = { 1, 0 };
 79	int base, ret;
 80
 81	/*
 82	 * To configure the duty period:
 83	 * On-cycle is set to 1 (the minimum allowed value)
 84	 * The off time of 0 is not configurable, so the mapping is:
 85	 * 0 -> off cycle = 2,
 86	 * 1 -> off cycle = 2,
 87	 * 2 -> off cycle = 3,
 88	 * 126 - > off cycle 127,
 89	 * 127 - > off cycle 1
 90	 * When on cycle == off cycle the PWM will be always on
 91	 */
 92	if (duty_cycle == 1)
 93		duty_cycle = 2;
 94	else if (duty_cycle > TWL4030_LED_MAX)
 95		duty_cycle = 1;
 96
 97	base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
 98
 99	pwm_config[1] = duty_cycle;
100
101	ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
102	if (ret < 0)
103		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
104
105	return ret;
106}
107
108static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
109{
110	struct twl_pwmled_chip *twl = to_twl(chip);
111	int ret;
112	u8 val;
113
114	mutex_lock(&twl->mutex);
115	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
116	if (ret < 0) {
117		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
118		goto out;
119	}
120
121	val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
122
123	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
124	if (ret < 0)
125		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
126
127out:
128	mutex_unlock(&twl->mutex);
129	return ret;
130}
131
132static void twl4030_pwmled_disable(struct pwm_chip *chip,
133				   struct pwm_device *pwm)
134{
135	struct twl_pwmled_chip *twl = to_twl(chip);
136	int ret;
137	u8 val;
138
139	mutex_lock(&twl->mutex);
140	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
141	if (ret < 0) {
142		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
143		goto out;
144	}
145
146	val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
147
148	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
149	if (ret < 0)
150		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
151
152out:
153	mutex_unlock(&twl->mutex);
154}
155
156static int twl4030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm,
157				const struct pwm_state *state)
158{
159	int ret;
160
161	if (state->polarity != PWM_POLARITY_NORMAL)
162		return -EINVAL;
163
164	if (!state->enabled) {
165		if (pwm->state.enabled)
166			twl4030_pwmled_disable(chip, pwm);
167
168		return 0;
169	}
170
171	/*
172	 * We cannot skip calling ->config even if state->period ==
173	 * pwm->state.period && state->duty_cycle == pwm->state.duty_cycle
174	 * because we might have exited early in the last call to
175	 * pwm_apply_might_sleep because of !state->enabled and so the two values in
176	 * pwm->state might not be configured in hardware.
177	 */
178	ret = twl4030_pwmled_config(chip, pwm,
179				    state->duty_cycle, state->period);
180	if (ret)
181		return ret;
182
183	if (!pwm->state.enabled)
184		ret = twl4030_pwmled_enable(chip, pwm);
185
186	return ret;
187}
188
189
190static const struct pwm_ops twl4030_pwmled_ops = {
191	.apply = twl4030_pwmled_apply,
192};
193
194static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
195			      int duty_ns, int period_ns)
196{
197	int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
198	u8 on_time;
199	int ret;
200
201	on_time = duty_cycle & 0xff;
202
203	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
204			       TWL6030_LED_PWM_CTRL1);
205	if (ret < 0)
206		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
207
208	return ret;
209}
210
211static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
212{
213	struct twl_pwmled_chip *twl = to_twl(chip);
214	int ret;
215	u8 val;
216
217	mutex_lock(&twl->mutex);
218	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
219	if (ret < 0) {
220		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
221			pwm->label);
222		goto out;
223	}
224
225	val &= ~TWL6040_LED_MODE_MASK;
226	val |= TWL6040_LED_MODE_ON;
227
228	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
229	if (ret < 0)
230		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
231
232out:
233	mutex_unlock(&twl->mutex);
234	return ret;
235}
236
237static void twl6030_pwmled_disable(struct pwm_chip *chip,
238				   struct pwm_device *pwm)
239{
240	struct twl_pwmled_chip *twl = to_twl(chip);
241	int ret;
242	u8 val;
243
244	mutex_lock(&twl->mutex);
245	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
246	if (ret < 0) {
247		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
248			pwm->label);
249		goto out;
250	}
251
252	val &= ~TWL6040_LED_MODE_MASK;
253	val |= TWL6040_LED_MODE_OFF;
254
255	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
256	if (ret < 0)
257		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
258
259out:
260	mutex_unlock(&twl->mutex);
261}
262
263static int twl6030_pwmled_apply(struct pwm_chip *chip, struct pwm_device *pwm,
264				const struct pwm_state *state)
265{
266	int err;
267
268	if (state->polarity != pwm->state.polarity)
269		return -EINVAL;
270
271	if (!state->enabled) {
272		if (pwm->state.enabled)
273			twl6030_pwmled_disable(chip, pwm);
274
275		return 0;
276	}
277
278	err = twl6030_pwmled_config(chip, pwm,
279				    state->duty_cycle, state->period);
280	if (err)
281		return err;
282
283	if (!pwm->state.enabled)
284		err = twl6030_pwmled_enable(chip, pwm);
285
286	return err;
287}
288
289static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
290{
291	struct twl_pwmled_chip *twl = to_twl(chip);
292	int ret;
293	u8 val;
294
295	mutex_lock(&twl->mutex);
296	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
297	if (ret < 0) {
298		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
299			pwm->label);
300		goto out;
301	}
302
303	val &= ~TWL6040_LED_MODE_MASK;
304	val |= TWL6040_LED_MODE_OFF;
305
306	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
307	if (ret < 0)
308		dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
309
310out:
311	mutex_unlock(&twl->mutex);
312	return ret;
313}
314
315static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
316{
317	struct twl_pwmled_chip *twl = to_twl(chip);
318	int ret;
319	u8 val;
320
321	mutex_lock(&twl->mutex);
322	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
323	if (ret < 0) {
324		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
325			pwm->label);
326		goto out;
327	}
328
329	val &= ~TWL6040_LED_MODE_MASK;
330	val |= TWL6040_LED_MODE_HW;
331
332	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
333	if (ret < 0)
334		dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
335
336out:
337	mutex_unlock(&twl->mutex);
338}
339
 
 
 
 
 
 
 
340static const struct pwm_ops twl6030_pwmled_ops = {
341	.apply = twl6030_pwmled_apply,
 
 
342	.request = twl6030_pwmled_request,
343	.free = twl6030_pwmled_free,
 
344};
345
346static int twl_pwmled_probe(struct platform_device *pdev)
347{
348	struct twl_pwmled_chip *twl;
 
349
350	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
351	if (!twl)
352		return -ENOMEM;
353
354	if (twl_class_is_4030()) {
355		twl->chip.ops = &twl4030_pwmled_ops;
356		twl->chip.npwm = 2;
357	} else {
358		twl->chip.ops = &twl6030_pwmled_ops;
359		twl->chip.npwm = 1;
360	}
361
362	twl->chip.dev = &pdev->dev;
 
 
363
364	mutex_init(&twl->mutex);
365
366	return devm_pwmchip_add(&pdev->dev, &twl->chip);
 
 
 
 
 
 
 
 
 
 
 
 
 
367}
368
369#ifdef CONFIG_OF
370static const struct of_device_id twl_pwmled_of_match[] = {
371	{ .compatible = "ti,twl4030-pwmled" },
372	{ .compatible = "ti,twl6030-pwmled" },
373	{ },
374};
375MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
376#endif
377
378static struct platform_driver twl_pwmled_driver = {
379	.driver = {
380		.name = "twl-pwmled",
381		.of_match_table = of_match_ptr(twl_pwmled_of_match),
382	},
383	.probe = twl_pwmled_probe,
 
384};
385module_platform_driver(twl_pwmled_driver);
386
387MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
388MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
389MODULE_ALIAS("platform:twl-pwmled");
390MODULE_LICENSE("GPL");
v3.15
 
  1/*
  2 * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver
  3 *
  4 * Copyright (C) 2012 Texas Instruments
  5 * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
  6 *
  7 * This driver is a complete rewrite of the former pwm-twl6030.c authorded by:
  8 * Hemanth V <hemanthv@ti.com>
  9 *
 10 * This program is free software; you can redistribute it and/or modify it
 11 * under the terms of the GNU General Public License version 2 as published by
 12 * the Free Software Foundation.
 13 *
 14 * This program is distributed in the hope that it will be useful, but WITHOUT
 15 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 16 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 17 * more details.
 18 *
 19 * You should have received a copy of the GNU General Public License along with
 20 * this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 
 
 
 21 */
 22
 23#include <linux/module.h>
 24#include <linux/of.h>
 25#include <linux/platform_device.h>
 26#include <linux/pwm.h>
 27#include <linux/i2c/twl.h>
 28#include <linux/slab.h>
 29
 30/*
 31 * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030.
 32 * To generate the signal on TWL4030:
 33 *  - LEDA uses PWMA
 34 *  - LEDB uses PWMB
 35 * TWL6030 has one LED pin with dedicated LEDPWM
 36 */
 37
 38#define TWL4030_LED_MAX		0x7f
 39#define TWL6030_LED_MAX		0xff
 40
 41/* Registers, bits and macro for TWL4030 */
 42#define TWL4030_LEDEN_REG	0x00
 43#define TWL4030_PWMA_REG	0x01
 44
 45#define TWL4030_LEDXON		(1 << 0)
 46#define TWL4030_LEDXPWM		(1 << 4)
 47#define TWL4030_LED_PINS	(TWL4030_LEDXON | TWL4030_LEDXPWM)
 48#define TWL4030_LED_TOGGLE(led, x)	((x) << (led))
 49
 50/* Register, bits and macro for TWL6030 */
 51#define TWL6030_LED_PWM_CTRL1	0xf4
 52#define TWL6030_LED_PWM_CTRL2	0xf5
 53
 54#define TWL6040_LED_MODE_HW	0x00
 55#define TWL6040_LED_MODE_ON	0x01
 56#define TWL6040_LED_MODE_OFF	0x02
 57#define TWL6040_LED_MODE_MASK	0x03
 58
 59struct twl_pwmled_chip {
 60	struct pwm_chip chip;
 61	struct mutex mutex;
 62};
 63
 64static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip)
 65{
 66	return container_of(chip, struct twl_pwmled_chip, chip);
 67}
 68
 69static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
 70			      int duty_ns, int period_ns)
 71{
 72	int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1;
 73	u8 pwm_config[2] = { 1, 0 };
 74	int base, ret;
 75
 76	/*
 77	 * To configure the duty period:
 78	 * On-cycle is set to 1 (the minimum allowed value)
 79	 * The off time of 0 is not configurable, so the mapping is:
 80	 * 0 -> off cycle = 2,
 81	 * 1 -> off cycle = 2,
 82	 * 2 -> off cycle = 3,
 83	 * 126 - > off cycle 127,
 84	 * 127 - > off cycle 1
 85	 * When on cycle == off cycle the PWM will be always on
 86	 */
 87	if (duty_cycle == 1)
 88		duty_cycle = 2;
 89	else if (duty_cycle > TWL4030_LED_MAX)
 90		duty_cycle = 1;
 91
 92	base = pwm->hwpwm * 2 + TWL4030_PWMA_REG;
 93
 94	pwm_config[1] = duty_cycle;
 95
 96	ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2);
 97	if (ret < 0)
 98		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
 99
100	return ret;
101}
102
103static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
104{
105	struct twl_pwmled_chip *twl = to_twl(chip);
106	int ret;
107	u8 val;
108
109	mutex_lock(&twl->mutex);
110	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
111	if (ret < 0) {
112		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
113		goto out;
114	}
115
116	val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
117
118	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
119	if (ret < 0)
120		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
121
122out:
123	mutex_unlock(&twl->mutex);
124	return ret;
125}
126
127static void twl4030_pwmled_disable(struct pwm_chip *chip,
128				   struct pwm_device *pwm)
129{
130	struct twl_pwmled_chip *twl = to_twl(chip);
131	int ret;
132	u8 val;
133
134	mutex_lock(&twl->mutex);
135	ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG);
136	if (ret < 0) {
137		dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label);
138		goto out;
139	}
140
141	val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS);
142
143	ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG);
144	if (ret < 0)
145		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
146
147out:
148	mutex_unlock(&twl->mutex);
149}
150
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
151static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm,
152			      int duty_ns, int period_ns)
153{
154	int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns;
155	u8 on_time;
156	int ret;
157
158	on_time = duty_cycle & 0xff;
159
160	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time,
161			       TWL6030_LED_PWM_CTRL1);
162	if (ret < 0)
163		dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label);
164
165	return ret;
166}
167
168static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm)
169{
170	struct twl_pwmled_chip *twl = to_twl(chip);
171	int ret;
172	u8 val;
173
174	mutex_lock(&twl->mutex);
175	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
176	if (ret < 0) {
177		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
178			pwm->label);
179		goto out;
180	}
181
182	val &= ~TWL6040_LED_MODE_MASK;
183	val |= TWL6040_LED_MODE_ON;
184
185	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
186	if (ret < 0)
187		dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label);
188
189out:
190	mutex_unlock(&twl->mutex);
191	return ret;
192}
193
194static void twl6030_pwmled_disable(struct pwm_chip *chip,
195				   struct pwm_device *pwm)
196{
197	struct twl_pwmled_chip *twl = to_twl(chip);
198	int ret;
199	u8 val;
200
201	mutex_lock(&twl->mutex);
202	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
203	if (ret < 0) {
204		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
205			pwm->label);
206		goto out;
207	}
208
209	val &= ~TWL6040_LED_MODE_MASK;
210	val |= TWL6040_LED_MODE_OFF;
211
212	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
213	if (ret < 0)
214		dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
215
216out:
217	mutex_unlock(&twl->mutex);
218}
219
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
220static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm)
221{
222	struct twl_pwmled_chip *twl = to_twl(chip);
223	int ret;
224	u8 val;
225
226	mutex_lock(&twl->mutex);
227	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
228	if (ret < 0) {
229		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
230			pwm->label);
231		goto out;
232	}
233
234	val &= ~TWL6040_LED_MODE_MASK;
235	val |= TWL6040_LED_MODE_OFF;
236
237	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
238	if (ret < 0)
239		dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label);
240
241out:
242	mutex_unlock(&twl->mutex);
243	return ret;
244}
245
246static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm)
247{
248	struct twl_pwmled_chip *twl = to_twl(chip);
249	int ret;
250	u8 val;
251
252	mutex_lock(&twl->mutex);
253	ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2);
254	if (ret < 0) {
255		dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n",
256			pwm->label);
257		goto out;
258	}
259
260	val &= ~TWL6040_LED_MODE_MASK;
261	val |= TWL6040_LED_MODE_HW;
262
263	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2);
264	if (ret < 0)
265		dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label);
266
267out:
268	mutex_unlock(&twl->mutex);
269}
270
271static const struct pwm_ops twl4030_pwmled_ops = {
272	.enable = twl4030_pwmled_enable,
273	.disable = twl4030_pwmled_disable,
274	.config = twl4030_pwmled_config,
275	.owner = THIS_MODULE,
276};
277
278static const struct pwm_ops twl6030_pwmled_ops = {
279	.enable = twl6030_pwmled_enable,
280	.disable = twl6030_pwmled_disable,
281	.config = twl6030_pwmled_config,
282	.request = twl6030_pwmled_request,
283	.free = twl6030_pwmled_free,
284	.owner = THIS_MODULE,
285};
286
287static int twl_pwmled_probe(struct platform_device *pdev)
288{
289	struct twl_pwmled_chip *twl;
290	int ret;
291
292	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
293	if (!twl)
294		return -ENOMEM;
295
296	if (twl_class_is_4030()) {
297		twl->chip.ops = &twl4030_pwmled_ops;
298		twl->chip.npwm = 2;
299	} else {
300		twl->chip.ops = &twl6030_pwmled_ops;
301		twl->chip.npwm = 1;
302	}
303
304	twl->chip.dev = &pdev->dev;
305	twl->chip.base = -1;
306	twl->chip.can_sleep = true;
307
308	mutex_init(&twl->mutex);
309
310	ret = pwmchip_add(&twl->chip);
311	if (ret < 0)
312		return ret;
313
314	platform_set_drvdata(pdev, twl);
315
316	return 0;
317}
318
319static int twl_pwmled_remove(struct platform_device *pdev)
320{
321	struct twl_pwmled_chip *twl = platform_get_drvdata(pdev);
322
323	return pwmchip_remove(&twl->chip);
324}
325
326#ifdef CONFIG_OF
327static const struct of_device_id twl_pwmled_of_match[] = {
328	{ .compatible = "ti,twl4030-pwmled" },
329	{ .compatible = "ti,twl6030-pwmled" },
330	{ },
331};
332MODULE_DEVICE_TABLE(of, twl_pwmled_of_match);
333#endif
334
335static struct platform_driver twl_pwmled_driver = {
336	.driver = {
337		.name = "twl-pwmled",
338		.of_match_table = of_match_ptr(twl_pwmled_of_match),
339	},
340	.probe = twl_pwmled_probe,
341	.remove = twl_pwmled_remove,
342};
343module_platform_driver(twl_pwmled_driver);
344
345MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
346MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs");
347MODULE_ALIAS("platform:twl-pwmled");
348MODULE_LICENSE("GPL");