Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*****************************************************************************/
3
4/*
5 * baycom_par.c -- baycom par96 and picpar radio modem driver.
6 *
7 * Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
8 *
9 * Please note that the GPL allows you to use the driver, NOT the radio.
10 * In order to use the radio, you need a license from the communications
11 * authority of your country.
12 *
13 * Supported modems
14 *
15 * par96: This is a modem for 9600 baud FSK compatible to the G3RUH standard.
16 * The modem does all the filtering and regenerates the receiver clock.
17 * Data is transferred from and to the PC via a shift register.
18 * The shift register is filled with 16 bits and an interrupt is
19 * signalled. The PC then empties the shift register in a burst. This
20 * modem connects to the parallel port, hence the name. The modem
21 * leaves the implementation of the HDLC protocol and the scrambler
22 * polynomial to the PC. This modem is no longer available (at least
23 * from Baycom) and has been replaced by the PICPAR modem (see below).
24 * You may however still build one from the schematics published in
25 * cq-DL :-).
26 *
27 * picpar: This is a redesign of the par96 modem by Henning Rech, DF9IC. The
28 * modem is protocol compatible to par96, but uses only three low
29 * power ICs and can therefore be fed from the parallel port and
30 * does not require an additional power supply. It features
31 * built in DCD circuitry. The driver should therefore be configured
32 * for hardware DCD.
33 *
34 * Command line options (insmod command line)
35 *
36 * mode driver mode string. Valid choices are par96 and picpar.
37 * iobase base address of the port; common values are 0x378, 0x278, 0x3bc
38 *
39 * History:
40 * 0.1 26.06.1996 Adapted from baycom.c and made network driver interface
41 * 18.10.1996 Changed to new user space access routines (copy_{to,from}_user)
42 * 0.3 26.04.1997 init code/data tagged
43 * 0.4 08.07.1997 alternative ser12 decoding algorithm (uses delta CTS ints)
44 * 0.5 11.11.1997 split into separate files for ser12/par96
45 * 0.6 03.08.1999 adapt to Linus' new __setup/__initcall
46 * removed some pre-2.2 kernel compatibility cruft
47 * 0.7 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
48 * 0.8 12.02.2000 adapted to softnet driver interface
49 * removed direct parport access, uses parport driver methods
50 * 0.9 03.07.2000 fix interface name handling
51 */
52
53/*****************************************************************************/
54
55#include <linux/module.h>
56#include <linux/kernel.h>
57#include <linux/types.h>
58#include <linux/fcntl.h>
59#include <linux/interrupt.h>
60#include <linux/ioport.h>
61#include <linux/in.h>
62#include <linux/string.h>
63#include <linux/init.h>
64#include <linux/delay.h>
65#include <linux/errno.h>
66#include <linux/netdevice.h>
67#include <linux/hdlcdrv.h>
68#include <linux/baycom.h>
69#include <linux/parport.h>
70#include <linux/bitops.h>
71#include <linux/jiffies.h>
72
73#include <linux/uaccess.h>
74
75/* --------------------------------------------------------------------- */
76
77#define BAYCOM_DEBUG
78
79/*
80 * modem options; bit mask
81 */
82#define BAYCOM_OPTIONS_SOFTDCD 1
83
84/* --------------------------------------------------------------------- */
85
86static const char bc_drvname[] = "baycom_par";
87static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
88"baycom_par: version 0.9\n";
89
90/* --------------------------------------------------------------------- */
91
92#define NR_PORTS 4
93
94static struct net_device *baycom_device[NR_PORTS];
95
96/* --------------------------------------------------------------------- */
97
98#define PAR96_BURSTBITS 16
99#define PAR96_BURST 4
100#define PAR96_PTT 2
101#define PAR96_TXBIT 1
102#define PAR96_ACK 0x40
103#define PAR96_RXBIT 0x20
104#define PAR96_DCD 0x10
105#define PAR97_POWER 0xf8
106
107/* ---------------------------------------------------------------------- */
108/*
109 * Information that need to be kept for each board.
110 */
111
112struct baycom_state {
113 struct hdlcdrv_state hdrv;
114
115 struct pardevice *pdev;
116 unsigned int options;
117
118 struct modem_state {
119 short arb_divider;
120 unsigned char flags;
121 unsigned int shreg;
122 struct modem_state_par96 {
123 int dcd_count;
124 unsigned int dcd_shreg;
125 unsigned long descram;
126 unsigned long scram;
127 } par96;
128 } modem;
129
130#ifdef BAYCOM_DEBUG
131 struct debug_vals {
132 unsigned long last_jiffies;
133 unsigned cur_intcnt;
134 unsigned last_intcnt;
135 int cur_pllcorr;
136 int last_pllcorr;
137 } debug_vals;
138#endif /* BAYCOM_DEBUG */
139};
140
141/* --------------------------------------------------------------------- */
142
143static inline void baycom_int_freq(struct baycom_state *bc)
144{
145#ifdef BAYCOM_DEBUG
146 unsigned long cur_jiffies = jiffies;
147 /*
148 * measure the interrupt frequency
149 */
150 bc->debug_vals.cur_intcnt++;
151 if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
152 bc->debug_vals.last_jiffies = cur_jiffies;
153 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
154 bc->debug_vals.cur_intcnt = 0;
155 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
156 bc->debug_vals.cur_pllcorr = 0;
157 }
158#endif /* BAYCOM_DEBUG */
159}
160
161/* --------------------------------------------------------------------- */
162/*
163 * ===================== PAR96 specific routines =========================
164 */
165
166#define PAR96_DESCRAM_TAP1 0x20000
167#define PAR96_DESCRAM_TAP2 0x01000
168#define PAR96_DESCRAM_TAP3 0x00001
169
170#define PAR96_DESCRAM_TAPSH1 17
171#define PAR96_DESCRAM_TAPSH2 12
172#define PAR96_DESCRAM_TAPSH3 0
173
174#define PAR96_SCRAM_TAP1 0x20000 /* X^17 */
175#define PAR96_SCRAM_TAPN 0x00021 /* X^0+X^5 */
176
177/* --------------------------------------------------------------------- */
178
179static inline void par96_tx(struct net_device *dev, struct baycom_state *bc)
180{
181 int i;
182 unsigned int data = hdlcdrv_getbits(&bc->hdrv);
183 struct parport *pp = bc->pdev->port;
184
185 for(i = 0; i < PAR96_BURSTBITS; i++, data >>= 1) {
186 unsigned char val = PAR97_POWER;
187 bc->modem.par96.scram = ((bc->modem.par96.scram << 1) |
188 (bc->modem.par96.scram & 1));
189 if (!(data & 1))
190 bc->modem.par96.scram ^= 1;
191 if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 1))
192 bc->modem.par96.scram ^=
193 (PAR96_SCRAM_TAPN << 1);
194 if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 2))
195 val |= PAR96_TXBIT;
196 pp->ops->write_data(pp, val);
197 pp->ops->write_data(pp, val | PAR96_BURST);
198 }
199}
200
201/* --------------------------------------------------------------------- */
202
203static inline void par96_rx(struct net_device *dev, struct baycom_state *bc)
204{
205 int i;
206 unsigned int data, mask, mask2, descx;
207 struct parport *pp = bc->pdev->port;
208
209 /*
210 * do receiver; differential decode and descramble on the fly
211 */
212 for(data = i = 0; i < PAR96_BURSTBITS; i++) {
213 bc->modem.par96.descram = (bc->modem.par96.descram << 1);
214 if (pp->ops->read_status(pp) & PAR96_RXBIT)
215 bc->modem.par96.descram |= 1;
216 descx = bc->modem.par96.descram ^
217 (bc->modem.par96.descram >> 1);
218 /* now the diff decoded data is inverted in descram */
219 pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT);
220 descx ^= ((descx >> PAR96_DESCRAM_TAPSH1) ^
221 (descx >> PAR96_DESCRAM_TAPSH2));
222 data >>= 1;
223 if (!(descx & 1))
224 data |= 0x8000;
225 pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT | PAR96_BURST);
226 }
227 hdlcdrv_putbits(&bc->hdrv, data);
228 /*
229 * do DCD algorithm
230 */
231 if (bc->options & BAYCOM_OPTIONS_SOFTDCD) {
232 bc->modem.par96.dcd_shreg = (bc->modem.par96.dcd_shreg >> 16)
233 | (data << 16);
234 /* search for flags and set the dcd counter appropriately */
235 for(mask = 0x1fe00, mask2 = 0xfc00, i = 0;
236 i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
237 if ((bc->modem.par96.dcd_shreg & mask) == mask2)
238 bc->modem.par96.dcd_count = HDLCDRV_MAXFLEN+4;
239 /* check for abort/noise sequences */
240 for(mask = 0x1fe00, mask2 = 0x1fe00, i = 0;
241 i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
242 if (((bc->modem.par96.dcd_shreg & mask) == mask2) &&
243 (bc->modem.par96.dcd_count >= 0))
244 bc->modem.par96.dcd_count -= HDLCDRV_MAXFLEN-10;
245 /* decrement and set the dcd variable */
246 if (bc->modem.par96.dcd_count >= 0)
247 bc->modem.par96.dcd_count -= 2;
248 hdlcdrv_setdcd(&bc->hdrv, bc->modem.par96.dcd_count > 0);
249 } else {
250 hdlcdrv_setdcd(&bc->hdrv, !!(pp->ops->read_status(pp) & PAR96_DCD));
251 }
252}
253
254/* --------------------------------------------------------------------- */
255
256static void par96_interrupt(void *dev_id)
257{
258 struct net_device *dev = dev_id;
259 struct baycom_state *bc = netdev_priv(dev);
260
261 baycom_int_freq(bc);
262 /*
263 * check if transmitter active
264 */
265 if (hdlcdrv_ptt(&bc->hdrv))
266 par96_tx(dev, bc);
267 else {
268 par96_rx(dev, bc);
269 if (--bc->modem.arb_divider <= 0) {
270 bc->modem.arb_divider = 6;
271 local_irq_enable();
272 hdlcdrv_arbitrate(dev, &bc->hdrv);
273 }
274 }
275 local_irq_enable();
276 hdlcdrv_transmitter(dev, &bc->hdrv);
277 hdlcdrv_receiver(dev, &bc->hdrv);
278 local_irq_disable();
279}
280
281/* --------------------------------------------------------------------- */
282
283static void par96_wakeup(void *handle)
284{
285 struct net_device *dev = (struct net_device *)handle;
286 struct baycom_state *bc = netdev_priv(dev);
287
288 printk(KERN_DEBUG "baycom_par: %s: why am I being woken up?\n", dev->name);
289 if (!parport_claim(bc->pdev))
290 printk(KERN_DEBUG "baycom_par: %s: I'm broken.\n", dev->name);
291}
292
293/* --------------------------------------------------------------------- */
294
295static int par96_open(struct net_device *dev)
296{
297 struct baycom_state *bc = netdev_priv(dev);
298 struct pardev_cb par_cb;
299 struct parport *pp;
300 int i;
301
302 if (!dev || !bc)
303 return -ENXIO;
304 pp = parport_find_base(dev->base_addr);
305 if (!pp) {
306 printk(KERN_ERR "baycom_par: parport at 0x%lx unknown\n", dev->base_addr);
307 return -ENXIO;
308 }
309 if (pp->irq < 0) {
310 printk(KERN_ERR "baycom_par: parport at 0x%lx has no irq\n", pp->base);
311 parport_put_port(pp);
312 return -ENXIO;
313 }
314 if ((~pp->modes) & (PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
315 printk(KERN_ERR "baycom_par: parport at 0x%lx cannot be used\n", pp->base);
316 parport_put_port(pp);
317 return -ENXIO;
318 }
319 memset(&bc->modem, 0, sizeof(bc->modem));
320 bc->hdrv.par.bitrate = 9600;
321 memset(&par_cb, 0, sizeof(par_cb));
322 par_cb.wakeup = par96_wakeup;
323 par_cb.irq_func = par96_interrupt;
324 par_cb.private = (void *)dev;
325 par_cb.flags = PARPORT_DEV_EXCL;
326 for (i = 0; i < NR_PORTS; i++)
327 if (baycom_device[i] == dev)
328 break;
329
330 if (i == NR_PORTS) {
331 pr_err("%s: no device found\n", bc_drvname);
332 parport_put_port(pp);
333 return -ENODEV;
334 }
335 bc->pdev = parport_register_dev_model(pp, dev->name, &par_cb, i);
336 parport_put_port(pp);
337 if (!bc->pdev) {
338 printk(KERN_ERR "baycom_par: cannot register parport at 0x%lx\n", dev->base_addr);
339 return -ENXIO;
340 }
341 if (parport_claim(bc->pdev)) {
342 printk(KERN_ERR "baycom_par: parport at 0x%lx busy\n", pp->base);
343 parport_unregister_device(bc->pdev);
344 return -EBUSY;
345 }
346 pp = bc->pdev->port;
347 dev->irq = pp->irq;
348 pp->ops->data_forward(pp);
349 bc->hdrv.par.bitrate = 9600;
350 pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER); /* switch off PTT */
351 pp->ops->enable_irq(pp);
352 printk(KERN_INFO "%s: par96 at iobase 0x%lx irq %u options 0x%x\n",
353 bc_drvname, dev->base_addr, dev->irq, bc->options);
354 return 0;
355}
356
357/* --------------------------------------------------------------------- */
358
359static int par96_close(struct net_device *dev)
360{
361 struct baycom_state *bc = netdev_priv(dev);
362 struct parport *pp;
363
364 if (!dev || !bc)
365 return -EINVAL;
366 pp = bc->pdev->port;
367 /* disable interrupt */
368 pp->ops->disable_irq(pp);
369 /* switch off PTT */
370 pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER);
371 parport_release(bc->pdev);
372 parport_unregister_device(bc->pdev);
373 printk(KERN_INFO "%s: close par96 at iobase 0x%lx irq %u\n",
374 bc_drvname, dev->base_addr, dev->irq);
375 return 0;
376}
377
378/* --------------------------------------------------------------------- */
379/*
380 * ===================== hdlcdrv driver interface =========================
381 */
382
383static int baycom_ioctl(struct net_device *dev, void __user *data,
384 struct hdlcdrv_ioctl *hi, int cmd);
385
386/* --------------------------------------------------------------------- */
387
388static const struct hdlcdrv_ops par96_ops = {
389 .drvname = bc_drvname,
390 .drvinfo = bc_drvinfo,
391 .open = par96_open,
392 .close = par96_close,
393 .ioctl = baycom_ioctl
394};
395
396/* --------------------------------------------------------------------- */
397
398static int baycom_setmode(struct baycom_state *bc, const char *modestr)
399{
400 if (!strncmp(modestr, "picpar", 6))
401 bc->options = 0;
402 else if (!strncmp(modestr, "par96", 5))
403 bc->options = BAYCOM_OPTIONS_SOFTDCD;
404 else
405 bc->options = !!strchr(modestr, '*');
406 return 0;
407}
408
409/* --------------------------------------------------------------------- */
410
411static int baycom_ioctl(struct net_device *dev, void __user *data,
412 struct hdlcdrv_ioctl *hi, int cmd)
413{
414 struct baycom_state *bc;
415 struct baycom_ioctl bi;
416
417 if (!dev)
418 return -EINVAL;
419
420 bc = netdev_priv(dev);
421 BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC);
422
423 if (cmd != SIOCDEVPRIVATE)
424 return -ENOIOCTLCMD;
425 switch (hi->cmd) {
426 default:
427 break;
428
429 case HDLCDRVCTL_GETMODE:
430 strcpy(hi->data.modename, bc->options ? "par96" : "picpar");
431 if (copy_to_user(data, hi, sizeof(struct hdlcdrv_ioctl)))
432 return -EFAULT;
433 return 0;
434
435 case HDLCDRVCTL_SETMODE:
436 if (netif_running(dev) || !capable(CAP_NET_ADMIN))
437 return -EACCES;
438 hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
439 return baycom_setmode(bc, hi->data.modename);
440
441 case HDLCDRVCTL_MODELIST:
442 strcpy(hi->data.modename, "par96,picpar");
443 if (copy_to_user(data, hi, sizeof(struct hdlcdrv_ioctl)))
444 return -EFAULT;
445 return 0;
446
447 case HDLCDRVCTL_MODEMPARMASK:
448 return HDLCDRV_PARMASK_IOBASE;
449
450 }
451
452 if (copy_from_user(&bi, data, sizeof(bi)))
453 return -EFAULT;
454 switch (bi.cmd) {
455 default:
456 return -ENOIOCTLCMD;
457
458#ifdef BAYCOM_DEBUG
459 case BAYCOMCTL_GETDEBUG:
460 bi.data.dbg.debug1 = bc->hdrv.ptt_keyed;
461 bi.data.dbg.debug2 = bc->debug_vals.last_intcnt;
462 bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr;
463 break;
464#endif /* BAYCOM_DEBUG */
465
466 }
467 if (copy_to_user(data, &bi, sizeof(bi)))
468 return -EFAULT;
469 return 0;
470
471}
472
473/* --------------------------------------------------------------------- */
474
475/*
476 * command line settable parameters
477 */
478static char *mode[NR_PORTS] = { "picpar", };
479static int iobase[NR_PORTS] = { 0x378, };
480
481module_param_array(mode, charp, NULL, 0);
482MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar");
483module_param_hw_array(iobase, int, ioport, NULL, 0);
484MODULE_PARM_DESC(iobase, "baycom io base address");
485
486MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
487MODULE_DESCRIPTION("Baycom par96 and picpar amateur radio modem driver");
488MODULE_LICENSE("GPL");
489
490/* --------------------------------------------------------------------- */
491
492static int baycom_par_probe(struct pardevice *par_dev)
493{
494 struct device_driver *drv = par_dev->dev.driver;
495 int len = strlen(drv->name);
496
497 if (strncmp(par_dev->name, drv->name, len))
498 return -ENODEV;
499
500 return 0;
501}
502
503static struct parport_driver baycom_par_driver = {
504 .name = "bcp",
505 .probe = baycom_par_probe,
506 .devmodel = true,
507};
508
509static int __init init_baycompar(void)
510{
511 int i, found = 0, ret;
512 char set_hw = 1;
513
514 printk(bc_drvinfo);
515
516 ret = parport_register_driver(&baycom_par_driver);
517 if (ret)
518 return ret;
519
520 /*
521 * register net devices
522 */
523 for (i = 0; i < NR_PORTS; i++) {
524 struct net_device *dev;
525 struct baycom_state *bc;
526 char ifname[IFNAMSIZ];
527
528 sprintf(ifname, "bcp%d", i);
529
530 if (!mode[i])
531 set_hw = 0;
532 if (!set_hw)
533 iobase[i] = 0;
534
535 dev = hdlcdrv_register(&par96_ops,
536 sizeof(struct baycom_state),
537 ifname, iobase[i], 0, 0);
538 if (IS_ERR(dev))
539 break;
540
541 bc = netdev_priv(dev);
542 if (set_hw && baycom_setmode(bc, mode[i]))
543 set_hw = 0;
544 found++;
545 baycom_device[i] = dev;
546 }
547
548 if (!found) {
549 parport_unregister_driver(&baycom_par_driver);
550 return -ENXIO;
551 }
552 return 0;
553}
554
555static void __exit cleanup_baycompar(void)
556{
557 int i;
558
559 for(i = 0; i < NR_PORTS; i++) {
560 struct net_device *dev = baycom_device[i];
561
562 if (dev)
563 hdlcdrv_unregister(dev);
564 }
565 parport_unregister_driver(&baycom_par_driver);
566}
567
568module_init(init_baycompar);
569module_exit(cleanup_baycompar);
570
571/* --------------------------------------------------------------------- */
572
573#ifndef MODULE
574
575/*
576 * format: baycom_par=io,mode
577 * mode: par96,picpar
578 */
579
580static int __init baycom_par_setup(char *str)
581{
582 static unsigned nr_dev;
583 int ints[2];
584
585 if (nr_dev >= NR_PORTS)
586 return 0;
587 str = get_options(str, 2, ints);
588 if (ints[0] < 1)
589 return 0;
590 mode[nr_dev] = str;
591 iobase[nr_dev] = ints[1];
592 nr_dev++;
593 return 1;
594}
595
596__setup("baycom_par=", baycom_par_setup);
597
598#endif /* MODULE */
599/* --------------------------------------------------------------------- */
1/*****************************************************************************/
2
3/*
4 * baycom_par.c -- baycom par96 and picpar radio modem driver.
5 *
6 * Copyright (C) 1996-2000 Thomas Sailer (sailer@ife.ee.ethz.ch)
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 *
22 * Please note that the GPL allows you to use the driver, NOT the radio.
23 * In order to use the radio, you need a license from the communications
24 * authority of your country.
25 *
26 *
27 * Supported modems
28 *
29 * par96: This is a modem for 9600 baud FSK compatible to the G3RUH standard.
30 * The modem does all the filtering and regenerates the receiver clock.
31 * Data is transferred from and to the PC via a shift register.
32 * The shift register is filled with 16 bits and an interrupt is
33 * signalled. The PC then empties the shift register in a burst. This
34 * modem connects to the parallel port, hence the name. The modem
35 * leaves the implementation of the HDLC protocol and the scrambler
36 * polynomial to the PC. This modem is no longer available (at least
37 * from Baycom) and has been replaced by the PICPAR modem (see below).
38 * You may however still build one from the schematics published in
39 * cq-DL :-).
40 *
41 * picpar: This is a redesign of the par96 modem by Henning Rech, DF9IC. The
42 * modem is protocol compatible to par96, but uses only three low
43 * power ICs and can therefore be fed from the parallel port and
44 * does not require an additional power supply. It features
45 * built in DCD circuitry. The driver should therefore be configured
46 * for hardware DCD.
47 *
48 *
49 * Command line options (insmod command line)
50 *
51 * mode driver mode string. Valid choices are par96 and picpar.
52 * iobase base address of the port; common values are 0x378, 0x278, 0x3bc
53 *
54 *
55 * History:
56 * 0.1 26.06.1996 Adapted from baycom.c and made network driver interface
57 * 18.10.1996 Changed to new user space access routines (copy_{to,from}_user)
58 * 0.3 26.04.1997 init code/data tagged
59 * 0.4 08.07.1997 alternative ser12 decoding algorithm (uses delta CTS ints)
60 * 0.5 11.11.1997 split into separate files for ser12/par96
61 * 0.6 03.08.1999 adapt to Linus' new __setup/__initcall
62 * removed some pre-2.2 kernel compatibility cruft
63 * 0.7 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
64 * 0.8 12.02.2000 adapted to softnet driver interface
65 * removed direct parport access, uses parport driver methods
66 * 0.9 03.07.2000 fix interface name handling
67 */
68
69/*****************************************************************************/
70
71#include <linux/module.h>
72#include <linux/kernel.h>
73#include <linux/types.h>
74#include <linux/fcntl.h>
75#include <linux/interrupt.h>
76#include <linux/ioport.h>
77#include <linux/in.h>
78#include <linux/string.h>
79#include <linux/init.h>
80#include <linux/delay.h>
81#include <linux/errno.h>
82#include <linux/netdevice.h>
83#include <linux/hdlcdrv.h>
84#include <linux/baycom.h>
85#include <linux/parport.h>
86#include <linux/bitops.h>
87#include <linux/jiffies.h>
88
89#include <asm/uaccess.h>
90
91/* --------------------------------------------------------------------- */
92
93#define BAYCOM_DEBUG
94
95/*
96 * modem options; bit mask
97 */
98#define BAYCOM_OPTIONS_SOFTDCD 1
99
100/* --------------------------------------------------------------------- */
101
102static const char bc_drvname[] = "baycom_par";
103static const char bc_drvinfo[] = KERN_INFO "baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA\n"
104"baycom_par: version 0.9\n";
105
106/* --------------------------------------------------------------------- */
107
108#define NR_PORTS 4
109
110static struct net_device *baycom_device[NR_PORTS];
111
112/* --------------------------------------------------------------------- */
113
114#define PAR96_BURSTBITS 16
115#define PAR96_BURST 4
116#define PAR96_PTT 2
117#define PAR96_TXBIT 1
118#define PAR96_ACK 0x40
119#define PAR96_RXBIT 0x20
120#define PAR96_DCD 0x10
121#define PAR97_POWER 0xf8
122
123/* ---------------------------------------------------------------------- */
124/*
125 * Information that need to be kept for each board.
126 */
127
128struct baycom_state {
129 struct hdlcdrv_state hdrv;
130
131 struct pardevice *pdev;
132 unsigned int options;
133
134 struct modem_state {
135 short arb_divider;
136 unsigned char flags;
137 unsigned int shreg;
138 struct modem_state_par96 {
139 int dcd_count;
140 unsigned int dcd_shreg;
141 unsigned long descram;
142 unsigned long scram;
143 } par96;
144 } modem;
145
146#ifdef BAYCOM_DEBUG
147 struct debug_vals {
148 unsigned long last_jiffies;
149 unsigned cur_intcnt;
150 unsigned last_intcnt;
151 int cur_pllcorr;
152 int last_pllcorr;
153 } debug_vals;
154#endif /* BAYCOM_DEBUG */
155};
156
157/* --------------------------------------------------------------------- */
158
159static void __inline__ baycom_int_freq(struct baycom_state *bc)
160{
161#ifdef BAYCOM_DEBUG
162 unsigned long cur_jiffies = jiffies;
163 /*
164 * measure the interrupt frequency
165 */
166 bc->debug_vals.cur_intcnt++;
167 if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
168 bc->debug_vals.last_jiffies = cur_jiffies;
169 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
170 bc->debug_vals.cur_intcnt = 0;
171 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
172 bc->debug_vals.cur_pllcorr = 0;
173 }
174#endif /* BAYCOM_DEBUG */
175}
176
177/* --------------------------------------------------------------------- */
178/*
179 * ===================== PAR96 specific routines =========================
180 */
181
182#define PAR96_DESCRAM_TAP1 0x20000
183#define PAR96_DESCRAM_TAP2 0x01000
184#define PAR96_DESCRAM_TAP3 0x00001
185
186#define PAR96_DESCRAM_TAPSH1 17
187#define PAR96_DESCRAM_TAPSH2 12
188#define PAR96_DESCRAM_TAPSH3 0
189
190#define PAR96_SCRAM_TAP1 0x20000 /* X^17 */
191#define PAR96_SCRAM_TAPN 0x00021 /* X^0+X^5 */
192
193/* --------------------------------------------------------------------- */
194
195static __inline__ void par96_tx(struct net_device *dev, struct baycom_state *bc)
196{
197 int i;
198 unsigned int data = hdlcdrv_getbits(&bc->hdrv);
199 struct parport *pp = bc->pdev->port;
200
201 for(i = 0; i < PAR96_BURSTBITS; i++, data >>= 1) {
202 unsigned char val = PAR97_POWER;
203 bc->modem.par96.scram = ((bc->modem.par96.scram << 1) |
204 (bc->modem.par96.scram & 1));
205 if (!(data & 1))
206 bc->modem.par96.scram ^= 1;
207 if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 1))
208 bc->modem.par96.scram ^=
209 (PAR96_SCRAM_TAPN << 1);
210 if (bc->modem.par96.scram & (PAR96_SCRAM_TAP1 << 2))
211 val |= PAR96_TXBIT;
212 pp->ops->write_data(pp, val);
213 pp->ops->write_data(pp, val | PAR96_BURST);
214 }
215}
216
217/* --------------------------------------------------------------------- */
218
219static __inline__ void par96_rx(struct net_device *dev, struct baycom_state *bc)
220{
221 int i;
222 unsigned int data, mask, mask2, descx;
223 struct parport *pp = bc->pdev->port;
224
225 /*
226 * do receiver; differential decode and descramble on the fly
227 */
228 for(data = i = 0; i < PAR96_BURSTBITS; i++) {
229 bc->modem.par96.descram = (bc->modem.par96.descram << 1);
230 if (pp->ops->read_status(pp) & PAR96_RXBIT)
231 bc->modem.par96.descram |= 1;
232 descx = bc->modem.par96.descram ^
233 (bc->modem.par96.descram >> 1);
234 /* now the diff decoded data is inverted in descram */
235 pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT);
236 descx ^= ((descx >> PAR96_DESCRAM_TAPSH1) ^
237 (descx >> PAR96_DESCRAM_TAPSH2));
238 data >>= 1;
239 if (!(descx & 1))
240 data |= 0x8000;
241 pp->ops->write_data(pp, PAR97_POWER | PAR96_PTT | PAR96_BURST);
242 }
243 hdlcdrv_putbits(&bc->hdrv, data);
244 /*
245 * do DCD algorithm
246 */
247 if (bc->options & BAYCOM_OPTIONS_SOFTDCD) {
248 bc->modem.par96.dcd_shreg = (bc->modem.par96.dcd_shreg >> 16)
249 | (data << 16);
250 /* search for flags and set the dcd counter appropriately */
251 for(mask = 0x1fe00, mask2 = 0xfc00, i = 0;
252 i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
253 if ((bc->modem.par96.dcd_shreg & mask) == mask2)
254 bc->modem.par96.dcd_count = HDLCDRV_MAXFLEN+4;
255 /* check for abort/noise sequences */
256 for(mask = 0x1fe00, mask2 = 0x1fe00, i = 0;
257 i < PAR96_BURSTBITS; i++, mask <<= 1, mask2 <<= 1)
258 if (((bc->modem.par96.dcd_shreg & mask) == mask2) &&
259 (bc->modem.par96.dcd_count >= 0))
260 bc->modem.par96.dcd_count -= HDLCDRV_MAXFLEN-10;
261 /* decrement and set the dcd variable */
262 if (bc->modem.par96.dcd_count >= 0)
263 bc->modem.par96.dcd_count -= 2;
264 hdlcdrv_setdcd(&bc->hdrv, bc->modem.par96.dcd_count > 0);
265 } else {
266 hdlcdrv_setdcd(&bc->hdrv, !!(pp->ops->read_status(pp) & PAR96_DCD));
267 }
268}
269
270/* --------------------------------------------------------------------- */
271
272static void par96_interrupt(void *dev_id)
273{
274 struct net_device *dev = dev_id;
275 struct baycom_state *bc = netdev_priv(dev);
276
277 baycom_int_freq(bc);
278 /*
279 * check if transmitter active
280 */
281 if (hdlcdrv_ptt(&bc->hdrv))
282 par96_tx(dev, bc);
283 else {
284 par96_rx(dev, bc);
285 if (--bc->modem.arb_divider <= 0) {
286 bc->modem.arb_divider = 6;
287 local_irq_enable();
288 hdlcdrv_arbitrate(dev, &bc->hdrv);
289 }
290 }
291 local_irq_enable();
292 hdlcdrv_transmitter(dev, &bc->hdrv);
293 hdlcdrv_receiver(dev, &bc->hdrv);
294 local_irq_disable();
295}
296
297/* --------------------------------------------------------------------- */
298
299static void par96_wakeup(void *handle)
300{
301 struct net_device *dev = (struct net_device *)handle;
302 struct baycom_state *bc = netdev_priv(dev);
303
304 printk(KERN_DEBUG "baycom_par: %s: why am I being woken up?\n", dev->name);
305 if (!parport_claim(bc->pdev))
306 printk(KERN_DEBUG "baycom_par: %s: I'm broken.\n", dev->name);
307}
308
309/* --------------------------------------------------------------------- */
310
311static int par96_open(struct net_device *dev)
312{
313 struct baycom_state *bc = netdev_priv(dev);
314 struct parport *pp;
315
316 if (!dev || !bc)
317 return -ENXIO;
318 pp = parport_find_base(dev->base_addr);
319 if (!pp) {
320 printk(KERN_ERR "baycom_par: parport at 0x%lx unknown\n", dev->base_addr);
321 return -ENXIO;
322 }
323 if (pp->irq < 0) {
324 printk(KERN_ERR "baycom_par: parport at 0x%lx has no irq\n", pp->base);
325 parport_put_port(pp);
326 return -ENXIO;
327 }
328 if ((~pp->modes) & (PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
329 printk(KERN_ERR "baycom_par: parport at 0x%lx cannot be used\n", pp->base);
330 parport_put_port(pp);
331 return -ENXIO;
332 }
333 memset(&bc->modem, 0, sizeof(bc->modem));
334 bc->hdrv.par.bitrate = 9600;
335 bc->pdev = parport_register_device(pp, dev->name, NULL, par96_wakeup,
336 par96_interrupt, PARPORT_DEV_EXCL, dev);
337 parport_put_port(pp);
338 if (!bc->pdev) {
339 printk(KERN_ERR "baycom_par: cannot register parport at 0x%lx\n", dev->base_addr);
340 return -ENXIO;
341 }
342 if (parport_claim(bc->pdev)) {
343 printk(KERN_ERR "baycom_par: parport at 0x%lx busy\n", pp->base);
344 parport_unregister_device(bc->pdev);
345 return -EBUSY;
346 }
347 pp = bc->pdev->port;
348 dev->irq = pp->irq;
349 pp->ops->data_forward(pp);
350 bc->hdrv.par.bitrate = 9600;
351 pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER); /* switch off PTT */
352 pp->ops->enable_irq(pp);
353 printk(KERN_INFO "%s: par96 at iobase 0x%lx irq %u options 0x%x\n",
354 bc_drvname, dev->base_addr, dev->irq, bc->options);
355 return 0;
356}
357
358/* --------------------------------------------------------------------- */
359
360static int par96_close(struct net_device *dev)
361{
362 struct baycom_state *bc = netdev_priv(dev);
363 struct parport *pp;
364
365 if (!dev || !bc)
366 return -EINVAL;
367 pp = bc->pdev->port;
368 /* disable interrupt */
369 pp->ops->disable_irq(pp);
370 /* switch off PTT */
371 pp->ops->write_data(pp, PAR96_PTT | PAR97_POWER);
372 parport_release(bc->pdev);
373 parport_unregister_device(bc->pdev);
374 printk(KERN_INFO "%s: close par96 at iobase 0x%lx irq %u\n",
375 bc_drvname, dev->base_addr, dev->irq);
376 return 0;
377}
378
379/* --------------------------------------------------------------------- */
380/*
381 * ===================== hdlcdrv driver interface =========================
382 */
383
384static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
385 struct hdlcdrv_ioctl *hi, int cmd);
386
387/* --------------------------------------------------------------------- */
388
389static struct hdlcdrv_ops par96_ops = {
390 .drvname = bc_drvname,
391 .drvinfo = bc_drvinfo,
392 .open = par96_open,
393 .close = par96_close,
394 .ioctl = baycom_ioctl
395};
396
397/* --------------------------------------------------------------------- */
398
399static int baycom_setmode(struct baycom_state *bc, const char *modestr)
400{
401 if (!strncmp(modestr, "picpar", 6))
402 bc->options = 0;
403 else if (!strncmp(modestr, "par96", 5))
404 bc->options = BAYCOM_OPTIONS_SOFTDCD;
405 else
406 bc->options = !!strchr(modestr, '*');
407 return 0;
408}
409
410/* --------------------------------------------------------------------- */
411
412static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr,
413 struct hdlcdrv_ioctl *hi, int cmd)
414{
415 struct baycom_state *bc;
416 struct baycom_ioctl bi;
417
418 if (!dev)
419 return -EINVAL;
420
421 bc = netdev_priv(dev);
422 BUG_ON(bc->hdrv.magic != HDLCDRV_MAGIC);
423
424 if (cmd != SIOCDEVPRIVATE)
425 return -ENOIOCTLCMD;
426 switch (hi->cmd) {
427 default:
428 break;
429
430 case HDLCDRVCTL_GETMODE:
431 strcpy(hi->data.modename, bc->options ? "par96" : "picpar");
432 if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
433 return -EFAULT;
434 return 0;
435
436 case HDLCDRVCTL_SETMODE:
437 if (netif_running(dev) || !capable(CAP_NET_ADMIN))
438 return -EACCES;
439 hi->data.modename[sizeof(hi->data.modename)-1] = '\0';
440 return baycom_setmode(bc, hi->data.modename);
441
442 case HDLCDRVCTL_MODELIST:
443 strcpy(hi->data.modename, "par96,picpar");
444 if (copy_to_user(ifr->ifr_data, hi, sizeof(struct hdlcdrv_ioctl)))
445 return -EFAULT;
446 return 0;
447
448 case HDLCDRVCTL_MODEMPARMASK:
449 return HDLCDRV_PARMASK_IOBASE;
450
451 }
452
453 if (copy_from_user(&bi, ifr->ifr_data, sizeof(bi)))
454 return -EFAULT;
455 switch (bi.cmd) {
456 default:
457 return -ENOIOCTLCMD;
458
459#ifdef BAYCOM_DEBUG
460 case BAYCOMCTL_GETDEBUG:
461 bi.data.dbg.debug1 = bc->hdrv.ptt_keyed;
462 bi.data.dbg.debug2 = bc->debug_vals.last_intcnt;
463 bi.data.dbg.debug3 = bc->debug_vals.last_pllcorr;
464 break;
465#endif /* BAYCOM_DEBUG */
466
467 }
468 if (copy_to_user(ifr->ifr_data, &bi, sizeof(bi)))
469 return -EFAULT;
470 return 0;
471
472}
473
474/* --------------------------------------------------------------------- */
475
476/*
477 * command line settable parameters
478 */
479static char *mode[NR_PORTS] = { "picpar", };
480static int iobase[NR_PORTS] = { 0x378, };
481
482module_param_array(mode, charp, NULL, 0);
483MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar");
484module_param_array(iobase, int, NULL, 0);
485MODULE_PARM_DESC(iobase, "baycom io base address");
486
487MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
488MODULE_DESCRIPTION("Baycom par96 and picpar amateur radio modem driver");
489MODULE_LICENSE("GPL");
490
491/* --------------------------------------------------------------------- */
492
493static int __init init_baycompar(void)
494{
495 int i, found = 0;
496 char set_hw = 1;
497
498 printk(bc_drvinfo);
499 /*
500 * register net devices
501 */
502 for (i = 0; i < NR_PORTS; i++) {
503 struct net_device *dev;
504 struct baycom_state *bc;
505 char ifname[IFNAMSIZ];
506
507 sprintf(ifname, "bcp%d", i);
508
509 if (!mode[i])
510 set_hw = 0;
511 if (!set_hw)
512 iobase[i] = 0;
513
514 dev = hdlcdrv_register(&par96_ops,
515 sizeof(struct baycom_state),
516 ifname, iobase[i], 0, 0);
517 if (IS_ERR(dev))
518 break;
519
520 bc = netdev_priv(dev);
521 if (set_hw && baycom_setmode(bc, mode[i]))
522 set_hw = 0;
523 found++;
524 baycom_device[i] = dev;
525 }
526
527 if (!found)
528 return -ENXIO;
529 return 0;
530}
531
532static void __exit cleanup_baycompar(void)
533{
534 int i;
535
536 for(i = 0; i < NR_PORTS; i++) {
537 struct net_device *dev = baycom_device[i];
538
539 if (dev)
540 hdlcdrv_unregister(dev);
541 }
542}
543
544module_init(init_baycompar);
545module_exit(cleanup_baycompar);
546
547/* --------------------------------------------------------------------- */
548
549#ifndef MODULE
550
551/*
552 * format: baycom_par=io,mode
553 * mode: par96,picpar
554 */
555
556static int __init baycom_par_setup(char *str)
557{
558 static unsigned nr_dev;
559 int ints[2];
560
561 if (nr_dev >= NR_PORTS)
562 return 0;
563 str = get_options(str, 2, ints);
564 if (ints[0] < 1)
565 return 0;
566 mode[nr_dev] = str;
567 iobase[nr_dev] = ints[1];
568 nr_dev++;
569 return 1;
570}
571
572__setup("baycom_par=", baycom_par_setup);
573
574#endif /* MODULE */
575/* --------------------------------------------------------------------- */