Loading...
Note: File does not exist in v6.8.
1/*
2 * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
3 * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License
7 * as published by the Free Software Foundation; either version 2
8 * of the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
17 * MA 02110-1301, USA.
18 */
19
20#include <linux/delay.h>
21#include <linux/slab.h>
22#include <linux/init.h>
23#include <linux/module.h>
24#include <linux/mtd/mtd.h>
25#include <linux/mtd/nand.h>
26#include <linux/mtd/partitions.h>
27#include <linux/interrupt.h>
28#include <linux/device.h>
29#include <linux/platform_device.h>
30#include <linux/clk.h>
31#include <linux/err.h>
32#include <linux/io.h>
33#include <linux/irq.h>
34#include <linux/completion.h>
35#include <linux/of.h>
36#include <linux/of_device.h>
37#include <linux/of_mtd.h>
38
39#include <asm/mach/flash.h>
40#include <linux/platform_data/mtd-mxc_nand.h>
41
42#define DRIVER_NAME "mxc_nand"
43
44/* Addresses for NFC registers */
45#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
46#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
47#define NFC_V1_V2_FLASH_ADDR (host->regs + 0x06)
48#define NFC_V1_V2_FLASH_CMD (host->regs + 0x08)
49#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
50#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
51#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
52#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
53#define NFC_V1_V2_WRPROT (host->regs + 0x12)
54#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
55#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
56#define NFC_V21_UNLOCKSTART_BLKADDR0 (host->regs + 0x20)
57#define NFC_V21_UNLOCKSTART_BLKADDR1 (host->regs + 0x24)
58#define NFC_V21_UNLOCKSTART_BLKADDR2 (host->regs + 0x28)
59#define NFC_V21_UNLOCKSTART_BLKADDR3 (host->regs + 0x2c)
60#define NFC_V21_UNLOCKEND_BLKADDR0 (host->regs + 0x22)
61#define NFC_V21_UNLOCKEND_BLKADDR1 (host->regs + 0x26)
62#define NFC_V21_UNLOCKEND_BLKADDR2 (host->regs + 0x2a)
63#define NFC_V21_UNLOCKEND_BLKADDR3 (host->regs + 0x2e)
64#define NFC_V1_V2_NF_WRPRST (host->regs + 0x18)
65#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a)
66#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c)
67
68#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
69#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2)
70#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
71#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
72#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
73#define NFC_V1_V2_CONFIG1_RST (1 << 6)
74#define NFC_V1_V2_CONFIG1_CE (1 << 7)
75#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
76#define NFC_V2_CONFIG1_PPB(x) (((x) & 0x3) << 9)
77#define NFC_V2_CONFIG1_FP_INT (1 << 11)
78
79#define NFC_V1_V2_CONFIG2_INT (1 << 15)
80
81/*
82 * Operation modes for the NFC. Valid for v1, v2 and v3
83 * type controllers.
84 */
85#define NFC_CMD (1 << 0)
86#define NFC_ADDR (1 << 1)
87#define NFC_INPUT (1 << 2)
88#define NFC_OUTPUT (1 << 3)
89#define NFC_ID (1 << 4)
90#define NFC_STATUS (1 << 5)
91
92#define NFC_V3_FLASH_CMD (host->regs_axi + 0x00)
93#define NFC_V3_FLASH_ADDR0 (host->regs_axi + 0x04)
94
95#define NFC_V3_CONFIG1 (host->regs_axi + 0x34)
96#define NFC_V3_CONFIG1_SP_EN (1 << 0)
97#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7 ) << 4)
98
99#define NFC_V3_ECC_STATUS_RESULT (host->regs_axi + 0x38)
100
101#define NFC_V3_LAUNCH (host->regs_axi + 0x40)
102
103#define NFC_V3_WRPROT (host->regs_ip + 0x0)
104#define NFC_V3_WRPROT_LOCK_TIGHT (1 << 0)
105#define NFC_V3_WRPROT_LOCK (1 << 1)
106#define NFC_V3_WRPROT_UNLOCK (1 << 2)
107#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
108
109#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0 (host->regs_ip + 0x04)
110
111#define NFC_V3_CONFIG2 (host->regs_ip + 0x24)
112#define NFC_V3_CONFIG2_PS_512 (0 << 0)
113#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
114#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
115#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
116#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
117#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
118#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5)
119#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
120#define NFC_V3_CONFIG2_PPB(x, shift) (((x) & 0x3) << shift)
121#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12)
122#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
123#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
124#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
125
126#define NFC_V3_CONFIG3 (host->regs_ip + 0x28)
127#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
128#define NFC_V3_CONFIG3_FW8 (1 << 3)
129#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
130#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x) (((x) & 0x7) << 12)
131#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
132#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
133
134#define NFC_V3_IPC (host->regs_ip + 0x2C)
135#define NFC_V3_IPC_CREQ (1 << 0)
136#define NFC_V3_IPC_INT (1 << 31)
137
138#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34)
139
140struct mxc_nand_host;
141
142struct mxc_nand_devtype_data {
143 void (*preset)(struct mtd_info *);
144 void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
145 void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
146 void (*send_page)(struct mtd_info *, unsigned int);
147 void (*send_read_id)(struct mxc_nand_host *);
148 uint16_t (*get_dev_status)(struct mxc_nand_host *);
149 int (*check_int)(struct mxc_nand_host *);
150 void (*irq_control)(struct mxc_nand_host *, int);
151 u32 (*get_ecc_status)(struct mxc_nand_host *);
152 struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
153 void (*select_chip)(struct mtd_info *mtd, int chip);
154 int (*correct_data)(struct mtd_info *mtd, u_char *dat,
155 u_char *read_ecc, u_char *calc_ecc);
156
157 /*
158 * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
159 * (CONFIG1:INT_MSK is set). To handle this the driver uses
160 * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK
161 */
162 int irqpending_quirk;
163 int needs_ip;
164
165 size_t regs_offset;
166 size_t spare0_offset;
167 size_t axi_offset;
168
169 int spare_len;
170 int eccbytes;
171 int eccsize;
172 int ppb_shift;
173};
174
175struct mxc_nand_host {
176 struct mtd_info mtd;
177 struct nand_chip nand;
178 struct device *dev;
179
180 void __iomem *spare0;
181 void __iomem *main_area0;
182
183 void __iomem *base;
184 void __iomem *regs;
185 void __iomem *regs_axi;
186 void __iomem *regs_ip;
187 int status_request;
188 struct clk *clk;
189 int clk_act;
190 int irq;
191 int eccsize;
192 int active_cs;
193
194 struct completion op_completion;
195
196 uint8_t *data_buf;
197 unsigned int buf_start;
198
199 const struct mxc_nand_devtype_data *devtype_data;
200 struct mxc_nand_platform_data pdata;
201};
202
203/* OOB placement block for use with hardware ecc generation */
204static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
205 .eccbytes = 5,
206 .eccpos = {6, 7, 8, 9, 10},
207 .oobfree = {{0, 5}, {12, 4}, }
208};
209
210static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
211 .eccbytes = 20,
212 .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
213 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
214 .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
215};
216
217/* OOB description for 512 byte pages with 16 byte OOB */
218static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
219 .eccbytes = 1 * 9,
220 .eccpos = {
221 7, 8, 9, 10, 11, 12, 13, 14, 15
222 },
223 .oobfree = {
224 {.offset = 0, .length = 5}
225 }
226};
227
228/* OOB description for 2048 byte pages with 64 byte OOB */
229static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
230 .eccbytes = 4 * 9,
231 .eccpos = {
232 7, 8, 9, 10, 11, 12, 13, 14, 15,
233 23, 24, 25, 26, 27, 28, 29, 30, 31,
234 39, 40, 41, 42, 43, 44, 45, 46, 47,
235 55, 56, 57, 58, 59, 60, 61, 62, 63
236 },
237 .oobfree = {
238 {.offset = 2, .length = 4},
239 {.offset = 16, .length = 7},
240 {.offset = 32, .length = 7},
241 {.offset = 48, .length = 7}
242 }
243};
244
245/* OOB description for 4096 byte pages with 128 byte OOB */
246static struct nand_ecclayout nandv2_hw_eccoob_4k = {
247 .eccbytes = 8 * 9,
248 .eccpos = {
249 7, 8, 9, 10, 11, 12, 13, 14, 15,
250 23, 24, 25, 26, 27, 28, 29, 30, 31,
251 39, 40, 41, 42, 43, 44, 45, 46, 47,
252 55, 56, 57, 58, 59, 60, 61, 62, 63,
253 71, 72, 73, 74, 75, 76, 77, 78, 79,
254 87, 88, 89, 90, 91, 92, 93, 94, 95,
255 103, 104, 105, 106, 107, 108, 109, 110, 111,
256 119, 120, 121, 122, 123, 124, 125, 126, 127,
257 },
258 .oobfree = {
259 {.offset = 2, .length = 4},
260 {.offset = 16, .length = 7},
261 {.offset = 32, .length = 7},
262 {.offset = 48, .length = 7},
263 {.offset = 64, .length = 7},
264 {.offset = 80, .length = 7},
265 {.offset = 96, .length = 7},
266 {.offset = 112, .length = 7},
267 }
268};
269
270static const char * const part_probes[] = {
271 "cmdlinepart", "RedBoot", "ofpart", NULL };
272
273static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
274{
275 int i;
276 u32 *t = trg;
277 const __iomem u32 *s = src;
278
279 for (i = 0; i < (size >> 2); i++)
280 *t++ = __raw_readl(s++);
281}
282
283static void memcpy32_toio(void __iomem *trg, const void *src, int size)
284{
285 int i;
286 u32 __iomem *t = trg;
287 const u32 *s = src;
288
289 for (i = 0; i < (size >> 2); i++)
290 __raw_writel(*s++, t++);
291}
292
293static int check_int_v3(struct mxc_nand_host *host)
294{
295 uint32_t tmp;
296
297 tmp = readl(NFC_V3_IPC);
298 if (!(tmp & NFC_V3_IPC_INT))
299 return 0;
300
301 tmp &= ~NFC_V3_IPC_INT;
302 writel(tmp, NFC_V3_IPC);
303
304 return 1;
305}
306
307static int check_int_v1_v2(struct mxc_nand_host *host)
308{
309 uint32_t tmp;
310
311 tmp = readw(NFC_V1_V2_CONFIG2);
312 if (!(tmp & NFC_V1_V2_CONFIG2_INT))
313 return 0;
314
315 if (!host->devtype_data->irqpending_quirk)
316 writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
317
318 return 1;
319}
320
321static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
322{
323 uint16_t tmp;
324
325 tmp = readw(NFC_V1_V2_CONFIG1);
326
327 if (activate)
328 tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
329 else
330 tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
331
332 writew(tmp, NFC_V1_V2_CONFIG1);
333}
334
335static void irq_control_v3(struct mxc_nand_host *host, int activate)
336{
337 uint32_t tmp;
338
339 tmp = readl(NFC_V3_CONFIG2);
340
341 if (activate)
342 tmp &= ~NFC_V3_CONFIG2_INT_MSK;
343 else
344 tmp |= NFC_V3_CONFIG2_INT_MSK;
345
346 writel(tmp, NFC_V3_CONFIG2);
347}
348
349static void irq_control(struct mxc_nand_host *host, int activate)
350{
351 if (host->devtype_data->irqpending_quirk) {
352 if (activate)
353 enable_irq(host->irq);
354 else
355 disable_irq_nosync(host->irq);
356 } else {
357 host->devtype_data->irq_control(host, activate);
358 }
359}
360
361static u32 get_ecc_status_v1(struct mxc_nand_host *host)
362{
363 return readw(NFC_V1_V2_ECC_STATUS_RESULT);
364}
365
366static u32 get_ecc_status_v2(struct mxc_nand_host *host)
367{
368 return readl(NFC_V1_V2_ECC_STATUS_RESULT);
369}
370
371static u32 get_ecc_status_v3(struct mxc_nand_host *host)
372{
373 return readl(NFC_V3_ECC_STATUS_RESULT);
374}
375
376static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
377{
378 struct mxc_nand_host *host = dev_id;
379
380 if (!host->devtype_data->check_int(host))
381 return IRQ_NONE;
382
383 irq_control(host, 0);
384
385 complete(&host->op_completion);
386
387 return IRQ_HANDLED;
388}
389
390/* This function polls the NANDFC to wait for the basic operation to
391 * complete by checking the INT bit of config2 register.
392 */
393static void wait_op_done(struct mxc_nand_host *host, int useirq)
394{
395 int max_retries = 8000;
396
397 if (useirq) {
398 if (!host->devtype_data->check_int(host)) {
399 reinit_completion(&host->op_completion);
400 irq_control(host, 1);
401 wait_for_completion(&host->op_completion);
402 }
403 } else {
404 while (max_retries-- > 0) {
405 if (host->devtype_data->check_int(host))
406 break;
407
408 udelay(1);
409 }
410 if (max_retries < 0)
411 pr_debug("%s: INT not set\n", __func__);
412 }
413}
414
415static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
416{
417 /* fill command */
418 writel(cmd, NFC_V3_FLASH_CMD);
419
420 /* send out command */
421 writel(NFC_CMD, NFC_V3_LAUNCH);
422
423 /* Wait for operation to complete */
424 wait_op_done(host, useirq);
425}
426
427/* This function issues the specified command to the NAND device and
428 * waits for completion. */
429static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
430{
431 pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
432
433 writew(cmd, NFC_V1_V2_FLASH_CMD);
434 writew(NFC_CMD, NFC_V1_V2_CONFIG2);
435
436 if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) {
437 int max_retries = 100;
438 /* Reset completion is indicated by NFC_CONFIG2 */
439 /* being set to 0 */
440 while (max_retries-- > 0) {
441 if (readw(NFC_V1_V2_CONFIG2) == 0) {
442 break;
443 }
444 udelay(1);
445 }
446 if (max_retries < 0)
447 pr_debug("%s: RESET failed\n", __func__);
448 } else {
449 /* Wait for operation to complete */
450 wait_op_done(host, useirq);
451 }
452}
453
454static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
455{
456 /* fill address */
457 writel(addr, NFC_V3_FLASH_ADDR0);
458
459 /* send out address */
460 writel(NFC_ADDR, NFC_V3_LAUNCH);
461
462 wait_op_done(host, 0);
463}
464
465/* This function sends an address (or partial address) to the
466 * NAND device. The address is used to select the source/destination for
467 * a NAND command. */
468static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
469{
470 pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
471
472 writew(addr, NFC_V1_V2_FLASH_ADDR);
473 writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
474
475 /* Wait for operation to complete */
476 wait_op_done(host, islast);
477}
478
479static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
480{
481 struct nand_chip *nand_chip = mtd->priv;
482 struct mxc_nand_host *host = nand_chip->priv;
483 uint32_t tmp;
484
485 tmp = readl(NFC_V3_CONFIG1);
486 tmp &= ~(7 << 4);
487 writel(tmp, NFC_V3_CONFIG1);
488
489 /* transfer data from NFC ram to nand */
490 writel(ops, NFC_V3_LAUNCH);
491
492 wait_op_done(host, false);
493}
494
495static void send_page_v2(struct mtd_info *mtd, unsigned int ops)
496{
497 struct nand_chip *nand_chip = mtd->priv;
498 struct mxc_nand_host *host = nand_chip->priv;
499
500 /* NANDFC buffer 0 is used for page read/write */
501 writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
502
503 writew(ops, NFC_V1_V2_CONFIG2);
504
505 /* Wait for operation to complete */
506 wait_op_done(host, true);
507}
508
509static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
510{
511 struct nand_chip *nand_chip = mtd->priv;
512 struct mxc_nand_host *host = nand_chip->priv;
513 int bufs, i;
514
515 if (mtd->writesize > 512)
516 bufs = 4;
517 else
518 bufs = 1;
519
520 for (i = 0; i < bufs; i++) {
521
522 /* NANDFC buffer 0 is used for page read/write */
523 writew((host->active_cs << 4) | i, NFC_V1_V2_BUF_ADDR);
524
525 writew(ops, NFC_V1_V2_CONFIG2);
526
527 /* Wait for operation to complete */
528 wait_op_done(host, true);
529 }
530}
531
532static void send_read_id_v3(struct mxc_nand_host *host)
533{
534 struct nand_chip *this = &host->nand;
535
536 /* Read ID into main buffer */
537 writel(NFC_ID, NFC_V3_LAUNCH);
538
539 wait_op_done(host, true);
540
541 memcpy32_fromio(host->data_buf, host->main_area0, 16);
542
543 if (this->options & NAND_BUSWIDTH_16) {
544 /* compress the ID info */
545 host->data_buf[1] = host->data_buf[2];
546 host->data_buf[2] = host->data_buf[4];
547 host->data_buf[3] = host->data_buf[6];
548 host->data_buf[4] = host->data_buf[8];
549 host->data_buf[5] = host->data_buf[10];
550 }
551}
552
553/* Request the NANDFC to perform a read of the NAND device ID. */
554static void send_read_id_v1_v2(struct mxc_nand_host *host)
555{
556 struct nand_chip *this = &host->nand;
557
558 /* NANDFC buffer 0 is used for device ID output */
559 writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
560
561 writew(NFC_ID, NFC_V1_V2_CONFIG2);
562
563 /* Wait for operation to complete */
564 wait_op_done(host, true);
565
566 memcpy32_fromio(host->data_buf, host->main_area0, 16);
567
568 if (this->options & NAND_BUSWIDTH_16) {
569 /* compress the ID info */
570 host->data_buf[1] = host->data_buf[2];
571 host->data_buf[2] = host->data_buf[4];
572 host->data_buf[3] = host->data_buf[6];
573 host->data_buf[4] = host->data_buf[8];
574 host->data_buf[5] = host->data_buf[10];
575 }
576}
577
578static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
579{
580 writew(NFC_STATUS, NFC_V3_LAUNCH);
581 wait_op_done(host, true);
582
583 return readl(NFC_V3_CONFIG1) >> 16;
584}
585
586/* This function requests the NANDFC to perform a read of the
587 * NAND device status and returns the current status. */
588static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
589{
590 void __iomem *main_buf = host->main_area0;
591 uint32_t store;
592 uint16_t ret;
593
594 writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
595
596 /*
597 * The device status is stored in main_area0. To
598 * prevent corruption of the buffer save the value
599 * and restore it afterwards.
600 */
601 store = readl(main_buf);
602
603 writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
604 wait_op_done(host, true);
605
606 ret = readw(main_buf);
607
608 writel(store, main_buf);
609
610 return ret;
611}
612
613/* This functions is used by upper layer to checks if device is ready */
614static int mxc_nand_dev_ready(struct mtd_info *mtd)
615{
616 /*
617 * NFC handles R/B internally. Therefore, this function
618 * always returns status as ready.
619 */
620 return 1;
621}
622
623static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
624{
625 /*
626 * If HW ECC is enabled, we turn it on during init. There is
627 * no need to enable again here.
628 */
629}
630
631static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
632 u_char *read_ecc, u_char *calc_ecc)
633{
634 struct nand_chip *nand_chip = mtd->priv;
635 struct mxc_nand_host *host = nand_chip->priv;
636
637 /*
638 * 1-Bit errors are automatically corrected in HW. No need for
639 * additional correction. 2-Bit errors cannot be corrected by
640 * HW ECC, so we need to return failure
641 */
642 uint16_t ecc_status = get_ecc_status_v1(host);
643
644 if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
645 pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
646 return -1;
647 }
648
649 return 0;
650}
651
652static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
653 u_char *read_ecc, u_char *calc_ecc)
654{
655 struct nand_chip *nand_chip = mtd->priv;
656 struct mxc_nand_host *host = nand_chip->priv;
657 u32 ecc_stat, err;
658 int no_subpages = 1;
659 int ret = 0;
660 u8 ecc_bit_mask, err_limit;
661
662 ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
663 err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
664
665 no_subpages = mtd->writesize >> 9;
666
667 ecc_stat = host->devtype_data->get_ecc_status(host);
668
669 do {
670 err = ecc_stat & ecc_bit_mask;
671 if (err > err_limit) {
672 printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
673 return -1;
674 } else {
675 ret += err;
676 }
677 ecc_stat >>= 4;
678 } while (--no_subpages);
679
680 pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
681
682 return ret;
683}
684
685static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
686 u_char *ecc_code)
687{
688 return 0;
689}
690
691static u_char mxc_nand_read_byte(struct mtd_info *mtd)
692{
693 struct nand_chip *nand_chip = mtd->priv;
694 struct mxc_nand_host *host = nand_chip->priv;
695 uint8_t ret;
696
697 /* Check for status request */
698 if (host->status_request)
699 return host->devtype_data->get_dev_status(host) & 0xFF;
700
701 ret = *(uint8_t *)(host->data_buf + host->buf_start);
702 host->buf_start++;
703
704 return ret;
705}
706
707static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
708{
709 struct nand_chip *nand_chip = mtd->priv;
710 struct mxc_nand_host *host = nand_chip->priv;
711 uint16_t ret;
712
713 ret = *(uint16_t *)(host->data_buf + host->buf_start);
714 host->buf_start += 2;
715
716 return ret;
717}
718
719/* Write data of length len to buffer buf. The data to be
720 * written on NAND Flash is first copied to RAMbuffer. After the Data Input
721 * Operation by the NFC, the data is written to NAND Flash */
722static void mxc_nand_write_buf(struct mtd_info *mtd,
723 const u_char *buf, int len)
724{
725 struct nand_chip *nand_chip = mtd->priv;
726 struct mxc_nand_host *host = nand_chip->priv;
727 u16 col = host->buf_start;
728 int n = mtd->oobsize + mtd->writesize - col;
729
730 n = min(n, len);
731
732 memcpy(host->data_buf + col, buf, n);
733
734 host->buf_start += n;
735}
736
737/* Read the data buffer from the NAND Flash. To read the data from NAND
738 * Flash first the data output cycle is initiated by the NFC, which copies
739 * the data to RAMbuffer. This data of length len is then copied to buffer buf.
740 */
741static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
742{
743 struct nand_chip *nand_chip = mtd->priv;
744 struct mxc_nand_host *host = nand_chip->priv;
745 u16 col = host->buf_start;
746 int n = mtd->oobsize + mtd->writesize - col;
747
748 n = min(n, len);
749
750 memcpy(buf, host->data_buf + col, n);
751
752 host->buf_start += n;
753}
754
755/* This function is used by upper layer for select and
756 * deselect of the NAND chip */
757static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip)
758{
759 struct nand_chip *nand_chip = mtd->priv;
760 struct mxc_nand_host *host = nand_chip->priv;
761
762 if (chip == -1) {
763 /* Disable the NFC clock */
764 if (host->clk_act) {
765 clk_disable_unprepare(host->clk);
766 host->clk_act = 0;
767 }
768 return;
769 }
770
771 if (!host->clk_act) {
772 /* Enable the NFC clock */
773 clk_prepare_enable(host->clk);
774 host->clk_act = 1;
775 }
776}
777
778static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
779{
780 struct nand_chip *nand_chip = mtd->priv;
781 struct mxc_nand_host *host = nand_chip->priv;
782
783 if (chip == -1) {
784 /* Disable the NFC clock */
785 if (host->clk_act) {
786 clk_disable_unprepare(host->clk);
787 host->clk_act = 0;
788 }
789 return;
790 }
791
792 if (!host->clk_act) {
793 /* Enable the NFC clock */
794 clk_prepare_enable(host->clk);
795 host->clk_act = 1;
796 }
797
798 host->active_cs = chip;
799 writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
800}
801
802/*
803 * Function to transfer data to/from spare area.
804 */
805static void copy_spare(struct mtd_info *mtd, bool bfrom)
806{
807 struct nand_chip *this = mtd->priv;
808 struct mxc_nand_host *host = this->priv;
809 u16 i, j;
810 u16 n = mtd->writesize >> 9;
811 u8 *d = host->data_buf + mtd->writesize;
812 u8 __iomem *s = host->spare0;
813 u16 t = host->devtype_data->spare_len;
814
815 j = (mtd->oobsize / n >> 1) << 1;
816
817 if (bfrom) {
818 for (i = 0; i < n - 1; i++)
819 memcpy32_fromio(d + i * j, s + i * t, j);
820
821 /* the last section */
822 memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
823 } else {
824 for (i = 0; i < n - 1; i++)
825 memcpy32_toio(&s[i * t], &d[i * j], j);
826
827 /* the last section */
828 memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
829 }
830}
831
832static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
833{
834 struct nand_chip *nand_chip = mtd->priv;
835 struct mxc_nand_host *host = nand_chip->priv;
836
837 /* Write out column address, if necessary */
838 if (column != -1) {
839 /*
840 * MXC NANDFC can only perform full page+spare or
841 * spare-only read/write. When the upper layers
842 * perform a read/write buf operation, the saved column
843 * address is used to index into the full page.
844 */
845 host->devtype_data->send_addr(host, 0, page_addr == -1);
846 if (mtd->writesize > 512)
847 /* another col addr cycle for 2k page */
848 host->devtype_data->send_addr(host, 0, false);
849 }
850
851 /* Write out page address, if necessary */
852 if (page_addr != -1) {
853 /* paddr_0 - p_addr_7 */
854 host->devtype_data->send_addr(host, (page_addr & 0xff), false);
855
856 if (mtd->writesize > 512) {
857 if (mtd->size >= 0x10000000) {
858 /* paddr_8 - paddr_15 */
859 host->devtype_data->send_addr(host,
860 (page_addr >> 8) & 0xff,
861 false);
862 host->devtype_data->send_addr(host,
863 (page_addr >> 16) & 0xff,
864 true);
865 } else
866 /* paddr_8 - paddr_15 */
867 host->devtype_data->send_addr(host,
868 (page_addr >> 8) & 0xff, true);
869 } else {
870 /* One more address cycle for higher density devices */
871 if (mtd->size >= 0x4000000) {
872 /* paddr_8 - paddr_15 */
873 host->devtype_data->send_addr(host,
874 (page_addr >> 8) & 0xff,
875 false);
876 host->devtype_data->send_addr(host,
877 (page_addr >> 16) & 0xff,
878 true);
879 } else
880 /* paddr_8 - paddr_15 */
881 host->devtype_data->send_addr(host,
882 (page_addr >> 8) & 0xff, true);
883 }
884 }
885}
886
887/*
888 * v2 and v3 type controllers can do 4bit or 8bit ecc depending
889 * on how much oob the nand chip has. For 8bit ecc we need at least
890 * 26 bytes of oob data per 512 byte block.
891 */
892static int get_eccsize(struct mtd_info *mtd)
893{
894 int oobbytes_per_512 = 0;
895
896 oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
897
898 if (oobbytes_per_512 < 26)
899 return 4;
900 else
901 return 8;
902}
903
904static void preset_v1(struct mtd_info *mtd)
905{
906 struct nand_chip *nand_chip = mtd->priv;
907 struct mxc_nand_host *host = nand_chip->priv;
908 uint16_t config1 = 0;
909
910 if (nand_chip->ecc.mode == NAND_ECC_HW)
911 config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
912
913 if (!host->devtype_data->irqpending_quirk)
914 config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
915
916 host->eccsize = 1;
917
918 writew(config1, NFC_V1_V2_CONFIG1);
919 /* preset operation */
920
921 /* Unlock the internal RAM Buffer */
922 writew(0x2, NFC_V1_V2_CONFIG);
923
924 /* Blocks to be unlocked */
925 writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
926 writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
927
928 /* Unlock Block Command for given address range */
929 writew(0x4, NFC_V1_V2_WRPROT);
930}
931
932static void preset_v2(struct mtd_info *mtd)
933{
934 struct nand_chip *nand_chip = mtd->priv;
935 struct mxc_nand_host *host = nand_chip->priv;
936 uint16_t config1 = 0;
937
938 if (nand_chip->ecc.mode == NAND_ECC_HW)
939 config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
940
941 config1 |= NFC_V2_CONFIG1_FP_INT;
942
943 if (!host->devtype_data->irqpending_quirk)
944 config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
945
946 if (mtd->writesize) {
947 uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
948
949 host->eccsize = get_eccsize(mtd);
950 if (host->eccsize == 4)
951 config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
952
953 config1 |= NFC_V2_CONFIG1_PPB(ffs(pages_per_block) - 6);
954 } else {
955 host->eccsize = 1;
956 }
957
958 writew(config1, NFC_V1_V2_CONFIG1);
959 /* preset operation */
960
961 /* Unlock the internal RAM Buffer */
962 writew(0x2, NFC_V1_V2_CONFIG);
963
964 /* Blocks to be unlocked */
965 writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
966 writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
967 writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
968 writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
969 writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
970 writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
971 writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
972 writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
973
974 /* Unlock Block Command for given address range */
975 writew(0x4, NFC_V1_V2_WRPROT);
976}
977
978static void preset_v3(struct mtd_info *mtd)
979{
980 struct nand_chip *chip = mtd->priv;
981 struct mxc_nand_host *host = chip->priv;
982 uint32_t config2, config3;
983 int i, addr_phases;
984
985 writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
986 writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
987
988 /* Unlock the internal RAM Buffer */
989 writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
990 NFC_V3_WRPROT);
991
992 /* Blocks to be unlocked */
993 for (i = 0; i < NAND_MAX_CHIPS; i++)
994 writel(0x0 | (0xffff << 16),
995 NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
996
997 writel(0, NFC_V3_IPC);
998
999 config2 = NFC_V3_CONFIG2_ONE_CYCLE |
1000 NFC_V3_CONFIG2_2CMD_PHASES |
1001 NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
1002 NFC_V3_CONFIG2_ST_CMD(0x70) |
1003 NFC_V3_CONFIG2_INT_MSK |
1004 NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
1005
1006 if (chip->ecc.mode == NAND_ECC_HW)
1007 config2 |= NFC_V3_CONFIG2_ECC_EN;
1008
1009 addr_phases = fls(chip->pagemask) >> 3;
1010
1011 if (mtd->writesize == 2048) {
1012 config2 |= NFC_V3_CONFIG2_PS_2048;
1013 config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
1014 } else if (mtd->writesize == 4096) {
1015 config2 |= NFC_V3_CONFIG2_PS_4096;
1016 config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
1017 } else {
1018 config2 |= NFC_V3_CONFIG2_PS_512;
1019 config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
1020 }
1021
1022 if (mtd->writesize) {
1023 config2 |= NFC_V3_CONFIG2_PPB(
1024 ffs(mtd->erasesize / mtd->writesize) - 6,
1025 host->devtype_data->ppb_shift);
1026 host->eccsize = get_eccsize(mtd);
1027 if (host->eccsize == 8)
1028 config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
1029 }
1030
1031 writel(config2, NFC_V3_CONFIG2);
1032
1033 config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
1034 NFC_V3_CONFIG3_NO_SDMA |
1035 NFC_V3_CONFIG3_RBB_MODE |
1036 NFC_V3_CONFIG3_SBB(6) | /* Reset default */
1037 NFC_V3_CONFIG3_ADD_OP(0);
1038
1039 if (!(chip->options & NAND_BUSWIDTH_16))
1040 config3 |= NFC_V3_CONFIG3_FW8;
1041
1042 writel(config3, NFC_V3_CONFIG3);
1043
1044 writel(0, NFC_V3_DELAY_LINE);
1045}
1046
1047/* Used by the upper layer to write command to NAND Flash for
1048 * different operations to be carried out on NAND Flash */
1049static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
1050 int column, int page_addr)
1051{
1052 struct nand_chip *nand_chip = mtd->priv;
1053 struct mxc_nand_host *host = nand_chip->priv;
1054
1055 pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
1056 command, column, page_addr);
1057
1058 /* Reset command state information */
1059 host->status_request = false;
1060
1061 /* Command pre-processing step */
1062 switch (command) {
1063 case NAND_CMD_RESET:
1064 host->devtype_data->preset(mtd);
1065 host->devtype_data->send_cmd(host, command, false);
1066 break;
1067
1068 case NAND_CMD_STATUS:
1069 host->buf_start = 0;
1070 host->status_request = true;
1071
1072 host->devtype_data->send_cmd(host, command, true);
1073 mxc_do_addr_cycle(mtd, column, page_addr);
1074 break;
1075
1076 case NAND_CMD_READ0:
1077 case NAND_CMD_READOOB:
1078 if (command == NAND_CMD_READ0)
1079 host->buf_start = column;
1080 else
1081 host->buf_start = column + mtd->writesize;
1082
1083 command = NAND_CMD_READ0; /* only READ0 is valid */
1084
1085 host->devtype_data->send_cmd(host, command, false);
1086 mxc_do_addr_cycle(mtd, column, page_addr);
1087
1088 if (mtd->writesize > 512)
1089 host->devtype_data->send_cmd(host,
1090 NAND_CMD_READSTART, true);
1091
1092 host->devtype_data->send_page(mtd, NFC_OUTPUT);
1093
1094 memcpy32_fromio(host->data_buf, host->main_area0,
1095 mtd->writesize);
1096 copy_spare(mtd, true);
1097 break;
1098
1099 case NAND_CMD_SEQIN:
1100 if (column >= mtd->writesize)
1101 /* call ourself to read a page */
1102 mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
1103
1104 host->buf_start = column;
1105
1106 host->devtype_data->send_cmd(host, command, false);
1107 mxc_do_addr_cycle(mtd, column, page_addr);
1108 break;
1109
1110 case NAND_CMD_PAGEPROG:
1111 memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
1112 copy_spare(mtd, false);
1113 host->devtype_data->send_page(mtd, NFC_INPUT);
1114 host->devtype_data->send_cmd(host, command, true);
1115 mxc_do_addr_cycle(mtd, column, page_addr);
1116 break;
1117
1118 case NAND_CMD_READID:
1119 host->devtype_data->send_cmd(host, command, true);
1120 mxc_do_addr_cycle(mtd, column, page_addr);
1121 host->devtype_data->send_read_id(host);
1122 host->buf_start = column;
1123 break;
1124
1125 case NAND_CMD_ERASE1:
1126 case NAND_CMD_ERASE2:
1127 host->devtype_data->send_cmd(host, command, false);
1128 mxc_do_addr_cycle(mtd, column, page_addr);
1129
1130 break;
1131 }
1132}
1133
1134/*
1135 * The generic flash bbt decriptors overlap with our ecc
1136 * hardware, so define some i.MX specific ones.
1137 */
1138static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
1139static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
1140
1141static struct nand_bbt_descr bbt_main_descr = {
1142 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1143 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1144 .offs = 0,
1145 .len = 4,
1146 .veroffs = 4,
1147 .maxblocks = 4,
1148 .pattern = bbt_pattern,
1149};
1150
1151static struct nand_bbt_descr bbt_mirror_descr = {
1152 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1153 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1154 .offs = 0,
1155 .len = 4,
1156 .veroffs = 4,
1157 .maxblocks = 4,
1158 .pattern = mirror_pattern,
1159};
1160
1161/* v1 + irqpending_quirk: i.MX21 */
1162static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
1163 .preset = preset_v1,
1164 .send_cmd = send_cmd_v1_v2,
1165 .send_addr = send_addr_v1_v2,
1166 .send_page = send_page_v1,
1167 .send_read_id = send_read_id_v1_v2,
1168 .get_dev_status = get_dev_status_v1_v2,
1169 .check_int = check_int_v1_v2,
1170 .irq_control = irq_control_v1_v2,
1171 .get_ecc_status = get_ecc_status_v1,
1172 .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
1173 .ecclayout_2k = &nandv1_hw_eccoob_largepage,
1174 .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
1175 .select_chip = mxc_nand_select_chip_v1_v3,
1176 .correct_data = mxc_nand_correct_data_v1,
1177 .irqpending_quirk = 1,
1178 .needs_ip = 0,
1179 .regs_offset = 0xe00,
1180 .spare0_offset = 0x800,
1181 .spare_len = 16,
1182 .eccbytes = 3,
1183 .eccsize = 1,
1184};
1185
1186/* v1 + !irqpending_quirk: i.MX27, i.MX31 */
1187static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
1188 .preset = preset_v1,
1189 .send_cmd = send_cmd_v1_v2,
1190 .send_addr = send_addr_v1_v2,
1191 .send_page = send_page_v1,
1192 .send_read_id = send_read_id_v1_v2,
1193 .get_dev_status = get_dev_status_v1_v2,
1194 .check_int = check_int_v1_v2,
1195 .irq_control = irq_control_v1_v2,
1196 .get_ecc_status = get_ecc_status_v1,
1197 .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
1198 .ecclayout_2k = &nandv1_hw_eccoob_largepage,
1199 .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
1200 .select_chip = mxc_nand_select_chip_v1_v3,
1201 .correct_data = mxc_nand_correct_data_v1,
1202 .irqpending_quirk = 0,
1203 .needs_ip = 0,
1204 .regs_offset = 0xe00,
1205 .spare0_offset = 0x800,
1206 .axi_offset = 0,
1207 .spare_len = 16,
1208 .eccbytes = 3,
1209 .eccsize = 1,
1210};
1211
1212/* v21: i.MX25, i.MX35 */
1213static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
1214 .preset = preset_v2,
1215 .send_cmd = send_cmd_v1_v2,
1216 .send_addr = send_addr_v1_v2,
1217 .send_page = send_page_v2,
1218 .send_read_id = send_read_id_v1_v2,
1219 .get_dev_status = get_dev_status_v1_v2,
1220 .check_int = check_int_v1_v2,
1221 .irq_control = irq_control_v1_v2,
1222 .get_ecc_status = get_ecc_status_v2,
1223 .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
1224 .ecclayout_2k = &nandv2_hw_eccoob_largepage,
1225 .ecclayout_4k = &nandv2_hw_eccoob_4k,
1226 .select_chip = mxc_nand_select_chip_v2,
1227 .correct_data = mxc_nand_correct_data_v2_v3,
1228 .irqpending_quirk = 0,
1229 .needs_ip = 0,
1230 .regs_offset = 0x1e00,
1231 .spare0_offset = 0x1000,
1232 .axi_offset = 0,
1233 .spare_len = 64,
1234 .eccbytes = 9,
1235 .eccsize = 0,
1236};
1237
1238/* v3.2a: i.MX51 */
1239static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
1240 .preset = preset_v3,
1241 .send_cmd = send_cmd_v3,
1242 .send_addr = send_addr_v3,
1243 .send_page = send_page_v3,
1244 .send_read_id = send_read_id_v3,
1245 .get_dev_status = get_dev_status_v3,
1246 .check_int = check_int_v3,
1247 .irq_control = irq_control_v3,
1248 .get_ecc_status = get_ecc_status_v3,
1249 .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
1250 .ecclayout_2k = &nandv2_hw_eccoob_largepage,
1251 .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
1252 .select_chip = mxc_nand_select_chip_v1_v3,
1253 .correct_data = mxc_nand_correct_data_v2_v3,
1254 .irqpending_quirk = 0,
1255 .needs_ip = 1,
1256 .regs_offset = 0,
1257 .spare0_offset = 0x1000,
1258 .axi_offset = 0x1e00,
1259 .spare_len = 64,
1260 .eccbytes = 0,
1261 .eccsize = 0,
1262 .ppb_shift = 7,
1263};
1264
1265/* v3.2b: i.MX53 */
1266static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
1267 .preset = preset_v3,
1268 .send_cmd = send_cmd_v3,
1269 .send_addr = send_addr_v3,
1270 .send_page = send_page_v3,
1271 .send_read_id = send_read_id_v3,
1272 .get_dev_status = get_dev_status_v3,
1273 .check_int = check_int_v3,
1274 .irq_control = irq_control_v3,
1275 .get_ecc_status = get_ecc_status_v3,
1276 .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
1277 .ecclayout_2k = &nandv2_hw_eccoob_largepage,
1278 .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
1279 .select_chip = mxc_nand_select_chip_v1_v3,
1280 .correct_data = mxc_nand_correct_data_v2_v3,
1281 .irqpending_quirk = 0,
1282 .needs_ip = 1,
1283 .regs_offset = 0,
1284 .spare0_offset = 0x1000,
1285 .axi_offset = 0x1e00,
1286 .spare_len = 64,
1287 .eccbytes = 0,
1288 .eccsize = 0,
1289 .ppb_shift = 8,
1290};
1291
1292static inline int is_imx21_nfc(struct mxc_nand_host *host)
1293{
1294 return host->devtype_data == &imx21_nand_devtype_data;
1295}
1296
1297static inline int is_imx27_nfc(struct mxc_nand_host *host)
1298{
1299 return host->devtype_data == &imx27_nand_devtype_data;
1300}
1301
1302static inline int is_imx25_nfc(struct mxc_nand_host *host)
1303{
1304 return host->devtype_data == &imx25_nand_devtype_data;
1305}
1306
1307static inline int is_imx51_nfc(struct mxc_nand_host *host)
1308{
1309 return host->devtype_data == &imx51_nand_devtype_data;
1310}
1311
1312static inline int is_imx53_nfc(struct mxc_nand_host *host)
1313{
1314 return host->devtype_data == &imx53_nand_devtype_data;
1315}
1316
1317static struct platform_device_id mxcnd_devtype[] = {
1318 {
1319 .name = "imx21-nand",
1320 .driver_data = (kernel_ulong_t) &imx21_nand_devtype_data,
1321 }, {
1322 .name = "imx27-nand",
1323 .driver_data = (kernel_ulong_t) &imx27_nand_devtype_data,
1324 }, {
1325 .name = "imx25-nand",
1326 .driver_data = (kernel_ulong_t) &imx25_nand_devtype_data,
1327 }, {
1328 .name = "imx51-nand",
1329 .driver_data = (kernel_ulong_t) &imx51_nand_devtype_data,
1330 }, {
1331 .name = "imx53-nand",
1332 .driver_data = (kernel_ulong_t) &imx53_nand_devtype_data,
1333 }, {
1334 /* sentinel */
1335 }
1336};
1337MODULE_DEVICE_TABLE(platform, mxcnd_devtype);
1338
1339#ifdef CONFIG_OF_MTD
1340static const struct of_device_id mxcnd_dt_ids[] = {
1341 {
1342 .compatible = "fsl,imx21-nand",
1343 .data = &imx21_nand_devtype_data,
1344 }, {
1345 .compatible = "fsl,imx27-nand",
1346 .data = &imx27_nand_devtype_data,
1347 }, {
1348 .compatible = "fsl,imx25-nand",
1349 .data = &imx25_nand_devtype_data,
1350 }, {
1351 .compatible = "fsl,imx51-nand",
1352 .data = &imx51_nand_devtype_data,
1353 }, {
1354 .compatible = "fsl,imx53-nand",
1355 .data = &imx53_nand_devtype_data,
1356 },
1357 { /* sentinel */ }
1358};
1359
1360static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
1361{
1362 struct device_node *np = host->dev->of_node;
1363 struct mxc_nand_platform_data *pdata = &host->pdata;
1364 const struct of_device_id *of_id =
1365 of_match_device(mxcnd_dt_ids, host->dev);
1366 int buswidth;
1367
1368 if (!np)
1369 return 1;
1370
1371 if (of_get_nand_ecc_mode(np) >= 0)
1372 pdata->hw_ecc = 1;
1373
1374 pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
1375
1376 buswidth = of_get_nand_bus_width(np);
1377 if (buswidth < 0)
1378 return buswidth;
1379
1380 pdata->width = buswidth / 8;
1381
1382 host->devtype_data = of_id->data;
1383
1384 return 0;
1385}
1386#else
1387static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
1388{
1389 return 1;
1390}
1391#endif
1392
1393static int mxcnd_probe(struct platform_device *pdev)
1394{
1395 struct nand_chip *this;
1396 struct mtd_info *mtd;
1397 struct mxc_nand_host *host;
1398 struct resource *res;
1399 int err = 0;
1400
1401 /* Allocate memory for MTD device structure and private data */
1402 host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host),
1403 GFP_KERNEL);
1404 if (!host)
1405 return -ENOMEM;
1406
1407 /* allocate a temporary buffer for the nand_scan_ident() */
1408 host->data_buf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL);
1409 if (!host->data_buf)
1410 return -ENOMEM;
1411
1412 host->dev = &pdev->dev;
1413 /* structures must be linked */
1414 this = &host->nand;
1415 mtd = &host->mtd;
1416 mtd->priv = this;
1417 mtd->owner = THIS_MODULE;
1418 mtd->dev.parent = &pdev->dev;
1419 mtd->name = DRIVER_NAME;
1420
1421 /* 50 us command delay time */
1422 this->chip_delay = 5;
1423
1424 this->priv = host;
1425 this->dev_ready = mxc_nand_dev_ready;
1426 this->cmdfunc = mxc_nand_command;
1427 this->read_byte = mxc_nand_read_byte;
1428 this->read_word = mxc_nand_read_word;
1429 this->write_buf = mxc_nand_write_buf;
1430 this->read_buf = mxc_nand_read_buf;
1431
1432 host->clk = devm_clk_get(&pdev->dev, NULL);
1433 if (IS_ERR(host->clk))
1434 return PTR_ERR(host->clk);
1435
1436 err = mxcnd_probe_dt(host);
1437 if (err > 0) {
1438 struct mxc_nand_platform_data *pdata =
1439 dev_get_platdata(&pdev->dev);
1440 if (pdata) {
1441 host->pdata = *pdata;
1442 host->devtype_data = (struct mxc_nand_devtype_data *)
1443 pdev->id_entry->driver_data;
1444 } else {
1445 err = -ENODEV;
1446 }
1447 }
1448 if (err < 0)
1449 return err;
1450
1451 if (host->devtype_data->needs_ip) {
1452 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1453 host->regs_ip = devm_ioremap_resource(&pdev->dev, res);
1454 if (IS_ERR(host->regs_ip))
1455 return PTR_ERR(host->regs_ip);
1456
1457 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
1458 } else {
1459 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1460 }
1461
1462 host->base = devm_ioremap_resource(&pdev->dev, res);
1463 if (IS_ERR(host->base))
1464 return PTR_ERR(host->base);
1465
1466 host->main_area0 = host->base;
1467
1468 if (host->devtype_data->regs_offset)
1469 host->regs = host->base + host->devtype_data->regs_offset;
1470 host->spare0 = host->base + host->devtype_data->spare0_offset;
1471 if (host->devtype_data->axi_offset)
1472 host->regs_axi = host->base + host->devtype_data->axi_offset;
1473
1474 this->ecc.bytes = host->devtype_data->eccbytes;
1475 host->eccsize = host->devtype_data->eccsize;
1476
1477 this->select_chip = host->devtype_data->select_chip;
1478 this->ecc.size = 512;
1479 this->ecc.layout = host->devtype_data->ecclayout_512;
1480
1481 if (host->pdata.hw_ecc) {
1482 this->ecc.calculate = mxc_nand_calculate_ecc;
1483 this->ecc.hwctl = mxc_nand_enable_hwecc;
1484 this->ecc.correct = host->devtype_data->correct_data;
1485 this->ecc.mode = NAND_ECC_HW;
1486 } else {
1487 this->ecc.mode = NAND_ECC_SOFT;
1488 }
1489
1490 /* NAND bus width determines access functions used by upper layer */
1491 if (host->pdata.width == 2)
1492 this->options |= NAND_BUSWIDTH_16;
1493
1494 if (host->pdata.flash_bbt) {
1495 this->bbt_td = &bbt_main_descr;
1496 this->bbt_md = &bbt_mirror_descr;
1497 /* update flash based bbt */
1498 this->bbt_options |= NAND_BBT_USE_FLASH;
1499 }
1500
1501 init_completion(&host->op_completion);
1502
1503 host->irq = platform_get_irq(pdev, 0);
1504 if (host->irq < 0)
1505 return host->irq;
1506
1507 /*
1508 * Use host->devtype_data->irq_control() here instead of irq_control()
1509 * because we must not disable_irq_nosync without having requested the
1510 * irq.
1511 */
1512 host->devtype_data->irq_control(host, 0);
1513
1514 err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
1515 0, DRIVER_NAME, host);
1516 if (err)
1517 return err;
1518
1519 err = clk_prepare_enable(host->clk);
1520 if (err)
1521 return err;
1522 host->clk_act = 1;
1523
1524 /*
1525 * Now that we "own" the interrupt make sure the interrupt mask bit is
1526 * cleared on i.MX21. Otherwise we can't read the interrupt status bit
1527 * on this machine.
1528 */
1529 if (host->devtype_data->irqpending_quirk) {
1530 disable_irq_nosync(host->irq);
1531 host->devtype_data->irq_control(host, 1);
1532 }
1533
1534 /* first scan to find the device and get the page size */
1535 if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) {
1536 err = -ENXIO;
1537 goto escan;
1538 }
1539
1540 /* allocate the right size buffer now */
1541 devm_kfree(&pdev->dev, (void *)host->data_buf);
1542 host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
1543 GFP_KERNEL);
1544 if (!host->data_buf) {
1545 err = -ENOMEM;
1546 goto escan;
1547 }
1548
1549 /* Call preset again, with correct writesize this time */
1550 host->devtype_data->preset(mtd);
1551
1552 if (mtd->writesize == 2048)
1553 this->ecc.layout = host->devtype_data->ecclayout_2k;
1554 else if (mtd->writesize == 4096)
1555 this->ecc.layout = host->devtype_data->ecclayout_4k;
1556
1557 if (this->ecc.mode == NAND_ECC_HW) {
1558 if (is_imx21_nfc(host) || is_imx27_nfc(host))
1559 this->ecc.strength = 1;
1560 else
1561 this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
1562 }
1563
1564 /* second phase scan */
1565 if (nand_scan_tail(mtd)) {
1566 err = -ENXIO;
1567 goto escan;
1568 }
1569
1570 /* Register the partitions */
1571 mtd_device_parse_register(mtd, part_probes,
1572 &(struct mtd_part_parser_data){
1573 .of_node = pdev->dev.of_node,
1574 },
1575 host->pdata.parts,
1576 host->pdata.nr_parts);
1577
1578 platform_set_drvdata(pdev, host);
1579
1580 return 0;
1581
1582escan:
1583 if (host->clk_act)
1584 clk_disable_unprepare(host->clk);
1585
1586 return err;
1587}
1588
1589static int mxcnd_remove(struct platform_device *pdev)
1590{
1591 struct mxc_nand_host *host = platform_get_drvdata(pdev);
1592
1593 nand_release(&host->mtd);
1594 if (host->clk_act)
1595 clk_disable_unprepare(host->clk);
1596
1597 return 0;
1598}
1599
1600static struct platform_driver mxcnd_driver = {
1601 .driver = {
1602 .name = DRIVER_NAME,
1603 .owner = THIS_MODULE,
1604 .of_match_table = of_match_ptr(mxcnd_dt_ids),
1605 },
1606 .id_table = mxcnd_devtype,
1607 .probe = mxcnd_probe,
1608 .remove = mxcnd_remove,
1609};
1610module_platform_driver(mxcnd_driver);
1611
1612MODULE_AUTHOR("Freescale Semiconductor, Inc.");
1613MODULE_DESCRIPTION("MXC NAND MTD driver");
1614MODULE_LICENSE("GPL");