Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * I2C access for DA9052 PMICs.
4 *
5 * Copyright(c) 2011 Dialog Semiconductor Ltd.
6 *
7 * Author: David Dajun Chen <dchen@diasemi.com>
8 */
9
10#include <linux/device.h>
11#include <linux/module.h>
12#include <linux/input.h>
13#include <linux/mfd/core.h>
14#include <linux/i2c.h>
15#include <linux/err.h>
16#include <linux/of.h>
17
18#include <linux/mfd/da9052/da9052.h>
19#include <linux/mfd/da9052/reg.h>
20
21
22/* I2C safe register check */
23static inline bool i2c_safe_reg(unsigned char reg)
24{
25 switch (reg) {
26 case DA9052_STATUS_A_REG:
27 case DA9052_STATUS_B_REG:
28 case DA9052_STATUS_C_REG:
29 case DA9052_STATUS_D_REG:
30 case DA9052_ADC_RES_L_REG:
31 case DA9052_ADC_RES_H_REG:
32 case DA9052_VDD_RES_REG:
33 case DA9052_ICHG_AV_REG:
34 case DA9052_TBAT_RES_REG:
35 case DA9052_ADCIN4_RES_REG:
36 case DA9052_ADCIN5_RES_REG:
37 case DA9052_ADCIN6_RES_REG:
38 case DA9052_TJUNC_RES_REG:
39 case DA9052_TSI_X_MSB_REG:
40 case DA9052_TSI_Y_MSB_REG:
41 case DA9052_TSI_LSB_REG:
42 case DA9052_TSI_Z_MSB_REG:
43 return true;
44 default:
45 return false;
46 }
47}
48
49/*
50 * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
51 * gets lockup up or fails to respond following a system reset.
52 * This fix is to follow any read or write with a dummy read to a safe
53 * register.
54 */
55static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
56{
57 int val;
58
59 switch (da9052->chip_id) {
60 case DA9052:
61 case DA9053_AA:
62 case DA9053_BA:
63 case DA9053_BB:
64 /* A dummy read to a safe register address. */
65 if (!i2c_safe_reg(reg))
66 return regmap_read(da9052->regmap,
67 DA9052_PARK_REGISTER,
68 &val);
69 break;
70 case DA9053_BC:
71 default:
72 /*
73 * For other chips parking of I2C register
74 * to a safe place is not required.
75 */
76 break;
77 }
78
79 return 0;
80}
81
82/*
83 * According to errata item 24, multiwrite mode should be avoided
84 * in order to prevent register data corruption after power-down.
85 */
86static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
87{
88 int reg_val, ret;
89
90 ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, ®_val);
91 if (ret < 0)
92 return ret;
93
94 if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
95 reg_val |= DA9052_CONTROL_B_WRITEMODE;
96 ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
97 reg_val);
98 if (ret < 0)
99 return ret;
100 }
101
102 return 0;
103}
104
105static const struct i2c_device_id da9052_i2c_id[] = {
106 {"da9052", DA9052},
107 {"da9053-aa", DA9053_AA},
108 {"da9053-ba", DA9053_BA},
109 {"da9053-bb", DA9053_BB},
110 {"da9053-bc", DA9053_BC},
111 {}
112};
113MODULE_DEVICE_TABLE(i2c, da9052_i2c_id);
114
115#ifdef CONFIG_OF
116static const struct of_device_id dialog_dt_ids[] = {
117 { .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
118 { .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
119 { .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
120 { .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
121 { .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
122 { /* sentinel */ }
123};
124#endif
125
126static int da9052_i2c_probe(struct i2c_client *client)
127{
128 const struct i2c_device_id *id = i2c_client_get_device_id(client);
129 struct da9052 *da9052;
130 int ret;
131
132 da9052 = devm_kzalloc(&client->dev, sizeof(struct da9052), GFP_KERNEL);
133 if (!da9052)
134 return -ENOMEM;
135
136 da9052->dev = &client->dev;
137 da9052->chip_irq = client->irq;
138 da9052->fix_io = da9052_i2c_fix;
139
140 i2c_set_clientdata(client, da9052);
141
142 da9052->regmap = devm_regmap_init_i2c(client, &da9052_regmap_config);
143 if (IS_ERR(da9052->regmap)) {
144 ret = PTR_ERR(da9052->regmap);
145 dev_err(&client->dev, "Failed to allocate register map: %d\n",
146 ret);
147 return ret;
148 }
149
150 ret = da9052_i2c_disable_multiwrite(da9052);
151 if (ret < 0)
152 return ret;
153
154#ifdef CONFIG_OF
155 if (!id)
156 id = of_device_get_match_data(&client->dev);
157#endif
158
159 if (!id) {
160 ret = -ENODEV;
161 dev_err(&client->dev, "id is null.\n");
162 return ret;
163 }
164
165 return da9052_device_init(da9052, id->driver_data);
166}
167
168static void da9052_i2c_remove(struct i2c_client *client)
169{
170 struct da9052 *da9052 = i2c_get_clientdata(client);
171
172 da9052_device_exit(da9052);
173}
174
175static struct i2c_driver da9052_i2c_driver = {
176 .probe = da9052_i2c_probe,
177 .remove = da9052_i2c_remove,
178 .id_table = da9052_i2c_id,
179 .driver = {
180 .name = "da9052",
181#ifdef CONFIG_OF
182 .of_match_table = dialog_dt_ids,
183#endif
184 },
185};
186
187static int __init da9052_i2c_init(void)
188{
189 int ret;
190
191 ret = i2c_add_driver(&da9052_i2c_driver);
192 if (ret != 0) {
193 pr_err("DA9052 I2C registration failed %d\n", ret);
194 return ret;
195 }
196
197 return 0;
198}
199subsys_initcall(da9052_i2c_init);
200
201static void __exit da9052_i2c_exit(void)
202{
203 i2c_del_driver(&da9052_i2c_driver);
204}
205module_exit(da9052_i2c_exit);
206
207MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
208MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
1/*
2 * I2C access for DA9052 PMICs.
3 *
4 * Copyright(c) 2011 Dialog Semiconductor Ltd.
5 *
6 * Author: David Dajun Chen <dchen@diasemi.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 */
14
15#include <linux/device.h>
16#include <linux/module.h>
17#include <linux/input.h>
18#include <linux/mfd/core.h>
19#include <linux/i2c.h>
20#include <linux/err.h>
21
22#include <linux/mfd/da9052/da9052.h>
23#include <linux/mfd/da9052/reg.h>
24
25#ifdef CONFIG_OF
26#include <linux/of.h>
27#include <linux/of_device.h>
28#endif
29
30/* I2C safe register check */
31static inline bool i2c_safe_reg(unsigned char reg)
32{
33 switch (reg) {
34 case DA9052_STATUS_A_REG:
35 case DA9052_STATUS_B_REG:
36 case DA9052_STATUS_C_REG:
37 case DA9052_STATUS_D_REG:
38 case DA9052_ADC_RES_L_REG:
39 case DA9052_ADC_RES_H_REG:
40 case DA9052_VDD_RES_REG:
41 case DA9052_ICHG_AV_REG:
42 case DA9052_TBAT_RES_REG:
43 case DA9052_ADCIN4_RES_REG:
44 case DA9052_ADCIN5_RES_REG:
45 case DA9052_ADCIN6_RES_REG:
46 case DA9052_TJUNC_RES_REG:
47 case DA9052_TSI_X_MSB_REG:
48 case DA9052_TSI_Y_MSB_REG:
49 case DA9052_TSI_LSB_REG:
50 case DA9052_TSI_Z_MSB_REG:
51 return true;
52 default:
53 return false;
54 }
55}
56
57/*
58 * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
59 * gets lockup up or fails to respond following a system reset.
60 * This fix is to follow any read or write with a dummy read to a safe
61 * register.
62 */
63static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
64{
65 int val;
66
67 switch (da9052->chip_id) {
68 case DA9052:
69 case DA9053_AA:
70 case DA9053_BA:
71 case DA9053_BB:
72 /* A dummy read to a safe register address. */
73 if (!i2c_safe_reg(reg))
74 return regmap_read(da9052->regmap,
75 DA9052_PARK_REGISTER,
76 &val);
77 break;
78 case DA9053_BC:
79 default:
80 /*
81 * For other chips parking of I2C register
82 * to a safe place is not required.
83 */
84 break;
85 }
86
87 return 0;
88}
89
90/*
91 * According to errata item 24, multiwrite mode should be avoided
92 * in order to prevent register data corruption after power-down.
93 */
94static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
95{
96 int reg_val, ret;
97
98 ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, ®_val);
99 if (ret < 0)
100 return ret;
101
102 if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
103 reg_val |= DA9052_CONTROL_B_WRITEMODE;
104 ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
105 reg_val);
106 if (ret < 0)
107 return ret;
108 }
109
110 return 0;
111}
112
113static const struct i2c_device_id da9052_i2c_id[] = {
114 {"da9052", DA9052},
115 {"da9053-aa", DA9053_AA},
116 {"da9053-ba", DA9053_BA},
117 {"da9053-bb", DA9053_BB},
118 {"da9053-bc", DA9053_BC},
119 {}
120};
121
122#ifdef CONFIG_OF
123static const struct of_device_id dialog_dt_ids[] = {
124 { .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
125 { .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
126 { .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
127 { .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
128 { .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
129 { /* sentinel */ }
130};
131#endif
132
133static int da9052_i2c_probe(struct i2c_client *client,
134 const struct i2c_device_id *id)
135{
136 struct da9052 *da9052;
137 int ret;
138
139 da9052 = devm_kzalloc(&client->dev, sizeof(struct da9052), GFP_KERNEL);
140 if (!da9052)
141 return -ENOMEM;
142
143 if (!i2c_check_functionality(client->adapter,
144 I2C_FUNC_SMBUS_BYTE_DATA)) {
145 dev_info(&client->dev, "Error in %s:i2c_check_functionality\n",
146 __func__);
147 return -ENODEV;
148 }
149
150 da9052->dev = &client->dev;
151 da9052->chip_irq = client->irq;
152 da9052->fix_io = da9052_i2c_fix;
153
154 i2c_set_clientdata(client, da9052);
155
156 da9052->regmap = devm_regmap_init_i2c(client, &da9052_regmap_config);
157 if (IS_ERR(da9052->regmap)) {
158 ret = PTR_ERR(da9052->regmap);
159 dev_err(&client->dev, "Failed to allocate register map: %d\n",
160 ret);
161 return ret;
162 }
163
164 ret = da9052_i2c_disable_multiwrite(da9052);
165 if (ret < 0)
166 return ret;
167
168#ifdef CONFIG_OF
169 if (!id) {
170 struct device_node *np = client->dev.of_node;
171 const struct of_device_id *deviceid;
172
173 deviceid = of_match_node(dialog_dt_ids, np);
174 id = deviceid->data;
175 }
176#endif
177
178 if (!id) {
179 ret = -ENODEV;
180 dev_err(&client->dev, "id is null.\n");
181 return ret;
182 }
183
184 ret = da9052_device_init(da9052, id->driver_data);
185 if (ret != 0)
186 return ret;
187
188 return 0;
189}
190
191static int da9052_i2c_remove(struct i2c_client *client)
192{
193 struct da9052 *da9052 = i2c_get_clientdata(client);
194
195 da9052_device_exit(da9052);
196 return 0;
197}
198
199static struct i2c_driver da9052_i2c_driver = {
200 .probe = da9052_i2c_probe,
201 .remove = da9052_i2c_remove,
202 .id_table = da9052_i2c_id,
203 .driver = {
204 .name = "da9052",
205 .owner = THIS_MODULE,
206#ifdef CONFIG_OF
207 .of_match_table = dialog_dt_ids,
208#endif
209 },
210};
211
212static int __init da9052_i2c_init(void)
213{
214 int ret;
215
216 ret = i2c_add_driver(&da9052_i2c_driver);
217 if (ret != 0) {
218 pr_err("DA9052 I2C registration failed %d\n", ret);
219 return ret;
220 }
221
222 return 0;
223}
224subsys_initcall(da9052_i2c_init);
225
226static void __exit da9052_i2c_exit(void)
227{
228 i2c_del_driver(&da9052_i2c_driver);
229}
230module_exit(da9052_i2c_exit);
231
232MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
233MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
234MODULE_LICENSE("GPL");