Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * USB Keyspan PDA / Xircom / Entrega Converter driver
4 *
5 * Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com>
6 * Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com>
7 * Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com>
8 * Copyright (C) 2020 Johan Hovold <johan@kernel.org>
9 *
10 * See Documentation/usb/usb-serial.rst for more information on using this
11 * driver
12 */
13
14#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/slab.h>
17#include <linux/tty.h>
18#include <linux/tty_driver.h>
19#include <linux/tty_flip.h>
20#include <linux/module.h>
21#include <linux/spinlock.h>
22#include <linux/workqueue.h>
23#include <linux/uaccess.h>
24#include <linux/usb.h>
25#include <linux/usb/serial.h>
26#include <linux/usb/ezusb.h>
27
28#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>, Johan Hovold <johan@kernel.org>"
29#define DRIVER_DESC "USB Keyspan PDA Converter driver"
30
31#define KEYSPAN_TX_THRESHOLD 128
32
33struct keyspan_pda_private {
34 int tx_room;
35 struct work_struct unthrottle_work;
36 struct usb_serial *serial;
37 struct usb_serial_port *port;
38};
39
40static int keyspan_pda_write_start(struct usb_serial_port *port);
41
42#define KEYSPAN_VENDOR_ID 0x06cd
43#define KEYSPAN_PDA_FAKE_ID 0x0103
44#define KEYSPAN_PDA_ID 0x0104 /* no clue */
45
46/* For Xircom PGSDB9 and older Entrega version of the same device */
47#define XIRCOM_VENDOR_ID 0x085a
48#define XIRCOM_FAKE_ID 0x8027
49#define XIRCOM_FAKE_ID_2 0x8025 /* "PGMFHUB" serial */
50#define ENTREGA_VENDOR_ID 0x1645
51#define ENTREGA_FAKE_ID 0x8093
52
53static const struct usb_device_id id_table_combined[] = {
54 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
55 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
56 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
57 { USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
58 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
59 { } /* Terminating entry */
60};
61MODULE_DEVICE_TABLE(usb, id_table_combined);
62
63static const struct usb_device_id id_table_std[] = {
64 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
65 { } /* Terminating entry */
66};
67
68static const struct usb_device_id id_table_fake[] = {
69 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
70 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
71 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) },
72 { USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) },
73 { } /* Terminating entry */
74};
75
76static int keyspan_pda_get_write_room(struct keyspan_pda_private *priv)
77{
78 struct usb_serial_port *port = priv->port;
79 struct usb_serial *serial = port->serial;
80 u8 room;
81 int rc;
82
83 rc = usb_control_msg_recv(serial->dev,
84 0,
85 6, /* write_room */
86 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN,
87 0, /* value: 0 means "remaining room" */
88 0, /* index */
89 &room,
90 1,
91 2000,
92 GFP_KERNEL);
93 if (rc) {
94 dev_dbg(&port->dev, "roomquery failed: %d\n", rc);
95 return rc;
96 }
97
98 dev_dbg(&port->dev, "roomquery says %d\n", room);
99
100 return room;
101}
102
103static void keyspan_pda_request_unthrottle(struct work_struct *work)
104{
105 struct keyspan_pda_private *priv =
106 container_of(work, struct keyspan_pda_private, unthrottle_work);
107 struct usb_serial_port *port = priv->port;
108 struct usb_serial *serial = port->serial;
109 unsigned long flags;
110 int result;
111
112 dev_dbg(&port->dev, "%s\n", __func__);
113
114 /*
115 * Ask the device to tell us when the tx buffer becomes
116 * sufficiently empty.
117 */
118 result = usb_control_msg(serial->dev,
119 usb_sndctrlpipe(serial->dev, 0),
120 7, /* request_unthrottle */
121 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
122 | USB_DIR_OUT,
123 KEYSPAN_TX_THRESHOLD,
124 0, /* index */
125 NULL,
126 0,
127 2000);
128 if (result < 0)
129 dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n",
130 __func__, result);
131 /*
132 * Need to check available space after requesting notification in case
133 * buffer is already empty so that no notification is sent.
134 */
135 result = keyspan_pda_get_write_room(priv);
136 if (result > KEYSPAN_TX_THRESHOLD) {
137 spin_lock_irqsave(&port->lock, flags);
138 priv->tx_room = max(priv->tx_room, result);
139 spin_unlock_irqrestore(&port->lock, flags);
140
141 usb_serial_port_softint(port);
142 }
143}
144
145static void keyspan_pda_rx_interrupt(struct urb *urb)
146{
147 struct usb_serial_port *port = urb->context;
148 unsigned char *data = urb->transfer_buffer;
149 unsigned int len = urb->actual_length;
150 int retval;
151 int status = urb->status;
152 struct keyspan_pda_private *priv;
153 unsigned long flags;
154
155 priv = usb_get_serial_port_data(port);
156
157 switch (status) {
158 case 0:
159 /* success */
160 break;
161 case -ECONNRESET:
162 case -ENOENT:
163 case -ESHUTDOWN:
164 /* this urb is terminated, clean up */
165 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status);
166 return;
167 default:
168 dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status);
169 goto exit;
170 }
171
172 if (len < 1) {
173 dev_warn(&port->dev, "short message received\n");
174 goto exit;
175 }
176
177 /* see if the message is data or a status interrupt */
178 switch (data[0]) {
179 case 0:
180 /* rest of message is rx data */
181 if (len < 2)
182 break;
183 tty_insert_flip_string(&port->port, data + 1, len - 1);
184 tty_flip_buffer_push(&port->port);
185 break;
186 case 1:
187 /* status interrupt */
188 if (len < 2) {
189 dev_warn(&port->dev, "short interrupt message received\n");
190 break;
191 }
192 dev_dbg(&port->dev, "rx int, d1=%d\n", data[1]);
193 switch (data[1]) {
194 case 1: /* modemline change */
195 break;
196 case 2: /* tx unthrottle interrupt */
197 spin_lock_irqsave(&port->lock, flags);
198 priv->tx_room = max(priv->tx_room, KEYSPAN_TX_THRESHOLD);
199 spin_unlock_irqrestore(&port->lock, flags);
200
201 keyspan_pda_write_start(port);
202
203 usb_serial_port_softint(port);
204 break;
205 default:
206 break;
207 }
208 break;
209 default:
210 break;
211 }
212
213exit:
214 retval = usb_submit_urb(urb, GFP_ATOMIC);
215 if (retval)
216 dev_err(&port->dev,
217 "%s - usb_submit_urb failed with result %d\n",
218 __func__, retval);
219}
220
221static void keyspan_pda_rx_throttle(struct tty_struct *tty)
222{
223 struct usb_serial_port *port = tty->driver_data;
224
225 /*
226 * Stop receiving characters. We just turn off the URB request, and
227 * let chars pile up in the device. If we're doing hardware
228 * flowcontrol, the device will signal the other end when its buffer
229 * fills up. If we're doing XON/XOFF, this would be a good time to
230 * send an XOFF, although it might make sense to foist that off upon
231 * the device too.
232 */
233 usb_kill_urb(port->interrupt_in_urb);
234}
235
236static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
237{
238 struct usb_serial_port *port = tty->driver_data;
239
240 /* just restart the receive interrupt URB */
241 if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
242 dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n");
243}
244
245static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
246{
247 int rc;
248 int bindex;
249
250 switch (baud) {
251 case 110:
252 bindex = 0;
253 break;
254 case 300:
255 bindex = 1;
256 break;
257 case 1200:
258 bindex = 2;
259 break;
260 case 2400:
261 bindex = 3;
262 break;
263 case 4800:
264 bindex = 4;
265 break;
266 case 9600:
267 bindex = 5;
268 break;
269 case 19200:
270 bindex = 6;
271 break;
272 case 38400:
273 bindex = 7;
274 break;
275 case 57600:
276 bindex = 8;
277 break;
278 case 115200:
279 bindex = 9;
280 break;
281 default:
282 bindex = 5; /* Default to 9600 */
283 baud = 9600;
284 }
285
286 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
287 0, /* set baud */
288 USB_TYPE_VENDOR
289 | USB_RECIP_INTERFACE
290 | USB_DIR_OUT, /* type */
291 bindex, /* value */
292 0, /* index */
293 NULL, /* &data */
294 0, /* size */
295 2000); /* timeout */
296 if (rc < 0)
297 return 0;
298
299 return baud;
300}
301
302static int keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
303{
304 struct usb_serial_port *port = tty->driver_data;
305 struct usb_serial *serial = port->serial;
306 int value;
307 int result;
308
309 if (break_state == -1)
310 value = 1; /* start break */
311 else
312 value = 0; /* clear break */
313
314 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
315 4, /* set break */
316 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
317 value, 0, NULL, 0, 2000);
318 if (result < 0) {
319 dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n",
320 __func__, result);
321 return result;
322 }
323
324 return 0;
325}
326
327static void keyspan_pda_set_termios(struct tty_struct *tty,
328 struct usb_serial_port *port,
329 const struct ktermios *old_termios)
330{
331 struct usb_serial *serial = port->serial;
332 speed_t speed;
333
334 /*
335 * cflag specifies lots of stuff: number of stop bits, parity, number
336 * of data bits, baud. What can the device actually handle?:
337 * CSTOPB (1 stop bit or 2)
338 * PARENB (parity)
339 * CSIZE (5bit .. 8bit)
340 * There is minimal hw support for parity (a PSW bit seems to hold the
341 * parity of whatever is in the accumulator). The UART either deals
342 * with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data,
343 * 1 special, stop). So, with firmware changes, we could do:
344 * 8N1: 10 bit
345 * 8N2: 11 bit, extra bit always (mark?)
346 * 8[EOMS]1: 11 bit, extra bit is parity
347 * 7[EOMS]1: 10 bit, b0/b7 is parity
348 * 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
349 *
350 * HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
351 * bit.
352 *
353 * For now, just do baud.
354 */
355 speed = tty_get_baud_rate(tty);
356 speed = keyspan_pda_setbaud(serial, speed);
357
358 if (speed == 0) {
359 dev_dbg(&port->dev, "can't handle requested baud rate\n");
360 /* It hasn't changed so.. */
361 speed = tty_termios_baud_rate(old_termios);
362 }
363 /*
364 * Only speed can change so copy the old h/w parameters then encode
365 * the new speed.
366 */
367 tty_termios_copy_hw(&tty->termios, old_termios);
368 tty_encode_baud_rate(tty, speed, speed);
369}
370
371/*
372 * Modem control pins: DTR and RTS are outputs and can be controlled.
373 * DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be
374 * read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused.
375 */
376static int keyspan_pda_get_modem_info(struct usb_serial *serial,
377 unsigned char *value)
378{
379 int rc;
380 u8 data;
381
382 rc = usb_control_msg_recv(serial->dev, 0,
383 3, /* get pins */
384 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_IN,
385 0,
386 0,
387 &data,
388 1,
389 2000,
390 GFP_KERNEL);
391 if (rc == 0)
392 *value = data;
393
394 return rc;
395}
396
397static int keyspan_pda_set_modem_info(struct usb_serial *serial,
398 unsigned char value)
399{
400 int rc;
401 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
402 3, /* set pins */
403 USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT,
404 value, 0, NULL, 0, 2000);
405 return rc;
406}
407
408static int keyspan_pda_tiocmget(struct tty_struct *tty)
409{
410 struct usb_serial_port *port = tty->driver_data;
411 struct usb_serial *serial = port->serial;
412 int rc;
413 unsigned char status;
414 int value;
415
416 rc = keyspan_pda_get_modem_info(serial, &status);
417 if (rc < 0)
418 return rc;
419
420 value = ((status & BIT(7)) ? TIOCM_DTR : 0) |
421 ((status & BIT(6)) ? TIOCM_CAR : 0) |
422 ((status & BIT(5)) ? TIOCM_RNG : 0) |
423 ((status & BIT(4)) ? TIOCM_DSR : 0) |
424 ((status & BIT(3)) ? TIOCM_CTS : 0) |
425 ((status & BIT(2)) ? TIOCM_RTS : 0);
426
427 return value;
428}
429
430static int keyspan_pda_tiocmset(struct tty_struct *tty,
431 unsigned int set, unsigned int clear)
432{
433 struct usb_serial_port *port = tty->driver_data;
434 struct usb_serial *serial = port->serial;
435 int rc;
436 unsigned char status;
437
438 rc = keyspan_pda_get_modem_info(serial, &status);
439 if (rc < 0)
440 return rc;
441
442 if (set & TIOCM_RTS)
443 status |= BIT(2);
444 if (set & TIOCM_DTR)
445 status |= BIT(7);
446
447 if (clear & TIOCM_RTS)
448 status &= ~BIT(2);
449 if (clear & TIOCM_DTR)
450 status &= ~BIT(7);
451 rc = keyspan_pda_set_modem_info(serial, status);
452 return rc;
453}
454
455static int keyspan_pda_write_start(struct usb_serial_port *port)
456{
457 struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
458 unsigned long flags;
459 struct urb *urb;
460 int count;
461 int room;
462 int rc;
463
464 /*
465 * Guess how much room is left in the device's ring buffer. If our
466 * write will result in no room left, ask the device to give us an
467 * interrupt when the room available rises above a threshold but also
468 * query how much room is currently available (in case our guess was
469 * too conservative and the buffer is already empty when the
470 * unthrottle work is scheduled).
471 */
472
473 /*
474 * We might block because of:
475 * the TX urb is in-flight (wait until it completes)
476 * the device is full (wait until it says there is room)
477 */
478 spin_lock_irqsave(&port->lock, flags);
479
480 room = priv->tx_room;
481 count = kfifo_len(&port->write_fifo);
482
483 if (!test_bit(0, &port->write_urbs_free) || count == 0 || room == 0) {
484 spin_unlock_irqrestore(&port->lock, flags);
485 return 0;
486 }
487 __clear_bit(0, &port->write_urbs_free);
488
489 if (count > room)
490 count = room;
491 if (count > port->bulk_out_size)
492 count = port->bulk_out_size;
493
494 urb = port->write_urb;
495 count = kfifo_out(&port->write_fifo, urb->transfer_buffer, count);
496 urb->transfer_buffer_length = count;
497
498 port->tx_bytes += count;
499 priv->tx_room -= count;
500
501 spin_unlock_irqrestore(&port->lock, flags);
502
503 dev_dbg(&port->dev, "%s - count = %d, txroom = %d\n", __func__, count, room);
504
505 rc = usb_submit_urb(urb, GFP_ATOMIC);
506 if (rc) {
507 dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n");
508
509 spin_lock_irqsave(&port->lock, flags);
510 port->tx_bytes -= count;
511 priv->tx_room = max(priv->tx_room, room + count);
512 __set_bit(0, &port->write_urbs_free);
513 spin_unlock_irqrestore(&port->lock, flags);
514
515 return rc;
516 }
517
518 if (count == room)
519 schedule_work(&priv->unthrottle_work);
520
521 return count;
522}
523
524static void keyspan_pda_write_bulk_callback(struct urb *urb)
525{
526 struct usb_serial_port *port = urb->context;
527 unsigned long flags;
528
529 spin_lock_irqsave(&port->lock, flags);
530 port->tx_bytes -= urb->transfer_buffer_length;
531 __set_bit(0, &port->write_urbs_free);
532 spin_unlock_irqrestore(&port->lock, flags);
533
534 keyspan_pda_write_start(port);
535
536 usb_serial_port_softint(port);
537}
538
539static int keyspan_pda_write(struct tty_struct *tty, struct usb_serial_port *port,
540 const unsigned char *buf, int count)
541{
542 int rc;
543
544 dev_dbg(&port->dev, "%s - count = %d\n", __func__, count);
545
546 if (!count)
547 return 0;
548
549 count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock);
550
551 rc = keyspan_pda_write_start(port);
552 if (rc)
553 return rc;
554
555 return count;
556}
557
558static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
559{
560 struct usb_serial *serial = port->serial;
561
562 if (on)
563 keyspan_pda_set_modem_info(serial, BIT(7) | BIT(2));
564 else
565 keyspan_pda_set_modem_info(serial, 0);
566}
567
568
569static int keyspan_pda_open(struct tty_struct *tty,
570 struct usb_serial_port *port)
571{
572 struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
573 int rc;
574
575 /* find out how much room is in the Tx ring */
576 rc = keyspan_pda_get_write_room(priv);
577 if (rc < 0)
578 return rc;
579
580 spin_lock_irq(&port->lock);
581 priv->tx_room = rc;
582 spin_unlock_irq(&port->lock);
583
584 rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
585 if (rc) {
586 dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__);
587 return rc;
588 }
589
590 return 0;
591}
592
593static void keyspan_pda_close(struct usb_serial_port *port)
594{
595 struct keyspan_pda_private *priv = usb_get_serial_port_data(port);
596
597 /*
598 * Stop the interrupt URB first as its completion handler may submit
599 * the write URB.
600 */
601 usb_kill_urb(port->interrupt_in_urb);
602 usb_kill_urb(port->write_urb);
603
604 cancel_work_sync(&priv->unthrottle_work);
605
606 spin_lock_irq(&port->lock);
607 kfifo_reset(&port->write_fifo);
608 spin_unlock_irq(&port->lock);
609}
610
611/* download the firmware to a "fake" device (pre-renumeration) */
612static int keyspan_pda_fake_startup(struct usb_serial *serial)
613{
614 unsigned int vid = le16_to_cpu(serial->dev->descriptor.idVendor);
615 const char *fw_name;
616
617 /* download the firmware here ... */
618 ezusb_fx1_set_reset(serial->dev, 1);
619
620 switch (vid) {
621 case KEYSPAN_VENDOR_ID:
622 fw_name = "keyspan_pda/keyspan_pda.fw";
623 break;
624 case XIRCOM_VENDOR_ID:
625 case ENTREGA_VENDOR_ID:
626 fw_name = "keyspan_pda/xircom_pgs.fw";
627 break;
628 default:
629 dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
630 __func__);
631 return -ENODEV;
632 }
633
634 if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) {
635 dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
636 fw_name);
637 return -ENOENT;
638 }
639
640 /*
641 * After downloading firmware renumeration will occur in a moment and
642 * the new device will bind to the real driver.
643 */
644
645 /* We want this device to fail to have a driver assigned to it. */
646 return 1;
647}
648
649MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
650MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
651
652static int keyspan_pda_port_probe(struct usb_serial_port *port)
653{
654
655 struct keyspan_pda_private *priv;
656
657 priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
658 if (!priv)
659 return -ENOMEM;
660
661 INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
662 priv->port = port;
663
664 usb_set_serial_port_data(port, priv);
665
666 return 0;
667}
668
669static void keyspan_pda_port_remove(struct usb_serial_port *port)
670{
671 struct keyspan_pda_private *priv;
672
673 priv = usb_get_serial_port_data(port);
674 kfree(priv);
675}
676
677static struct usb_serial_driver keyspan_pda_fake_device = {
678 .driver = {
679 .owner = THIS_MODULE,
680 .name = "keyspan_pda_pre",
681 },
682 .description = "Keyspan PDA - (prerenumeration)",
683 .id_table = id_table_fake,
684 .num_ports = 1,
685 .attach = keyspan_pda_fake_startup,
686};
687
688static struct usb_serial_driver keyspan_pda_device = {
689 .driver = {
690 .owner = THIS_MODULE,
691 .name = "keyspan_pda",
692 },
693 .description = "Keyspan PDA",
694 .id_table = id_table_std,
695 .num_ports = 1,
696 .num_bulk_out = 1,
697 .num_interrupt_in = 1,
698 .dtr_rts = keyspan_pda_dtr_rts,
699 .open = keyspan_pda_open,
700 .close = keyspan_pda_close,
701 .write = keyspan_pda_write,
702 .write_bulk_callback = keyspan_pda_write_bulk_callback,
703 .read_int_callback = keyspan_pda_rx_interrupt,
704 .throttle = keyspan_pda_rx_throttle,
705 .unthrottle = keyspan_pda_rx_unthrottle,
706 .set_termios = keyspan_pda_set_termios,
707 .break_ctl = keyspan_pda_break_ctl,
708 .tiocmget = keyspan_pda_tiocmget,
709 .tiocmset = keyspan_pda_tiocmset,
710 .port_probe = keyspan_pda_port_probe,
711 .port_remove = keyspan_pda_port_remove,
712};
713
714static struct usb_serial_driver * const serial_drivers[] = {
715 &keyspan_pda_device,
716 &keyspan_pda_fake_device,
717 NULL
718};
719
720module_usb_serial_driver(serial_drivers, id_table_combined);
721
722MODULE_AUTHOR(DRIVER_AUTHOR);
723MODULE_DESCRIPTION(DRIVER_DESC);
724MODULE_LICENSE("GPL");
1/*
2 * USB Keyspan PDA / Xircom / Entregra Converter driver
3 *
4 * Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com>
5 * Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com>
6 * Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * See Documentation/usb/usb-serial.txt for more information on using this
14 * driver
15 *
16 * (09/07/2001) gkh
17 * cleaned up the Xircom support. Added ids for Entregra device which is
18 * the same as the Xircom device. Enabled the code to be compiled for
19 * either Xircom or Keyspan devices.
20 *
21 * (08/11/2001) Cristian M. Craciunescu
22 * support for Xircom PGSDB9
23 *
24 * (05/31/2001) gkh
25 * switched from using spinlock to a semaphore, which fixes lots of
26 * problems.
27 *
28 * (04/08/2001) gb
29 * Identify version on module load.
30 *
31 * (11/01/2000) Adam J. Richter
32 * usb_device_id table support
33 *
34 * (10/05/2000) gkh
35 * Fixed bug with urb->dev not being set properly, now that the usb
36 * core needs it.
37 *
38 * (08/28/2000) gkh
39 * Added locks for SMP safeness.
40 * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
41 * than once.
42 *
43 * (07/20/2000) borchers
44 * - keyspan_pda_write no longer sleeps if it is called on interrupt time;
45 * PPP and the line discipline with stty echo on can call write on
46 * interrupt time and this would cause an oops if write slept
47 * - if keyspan_pda_write is in an interrupt, it will not call
48 * usb_control_msg (which sleeps) to query the room in the device
49 * buffer, it simply uses the current room value it has
50 * - if the urb is busy or if it is throttled keyspan_pda_write just
51 * returns 0, rather than sleeping to wait for this to change; the
52 * write_chan code in n_tty.c will sleep if needed before calling
53 * keyspan_pda_write again
54 * - if the device needs to be unthrottled, write now queues up the
55 * call to usb_control_msg (which sleeps) to unthrottle the device
56 * - the wakeups from keyspan_pda_write_bulk_callback are queued rather
57 * than done directly from the callback to avoid the race in write_chan
58 * - keyspan_pda_chars_in_buffer also indicates its buffer is full if the
59 * urb status is -EINPROGRESS, meaning it cannot write at the moment
60 *
61 * (07/19/2000) gkh
62 * Added module_init and module_exit functions to handle the fact that this
63 * driver is a loadable module now.
64 *
65 * (03/26/2000) gkh
66 * Split driver up into device specific pieces.
67 *
68 */
69
70
71#include <linux/kernel.h>
72#include <linux/errno.h>
73#include <linux/init.h>
74#include <linux/slab.h>
75#include <linux/tty.h>
76#include <linux/tty_driver.h>
77#include <linux/tty_flip.h>
78#include <linux/module.h>
79#include <linux/spinlock.h>
80#include <linux/workqueue.h>
81#include <linux/firmware.h>
82#include <linux/ihex.h>
83#include <linux/uaccess.h>
84#include <linux/usb.h>
85#include <linux/usb/serial.h>
86
87static int debug;
88
89/* make a simple define to handle if we are compiling keyspan_pda or xircom support */
90#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE)
91 #define KEYSPAN
92#else
93 #undef KEYSPAN
94#endif
95#if defined(CONFIG_USB_SERIAL_XIRCOM) || defined(CONFIG_USB_SERIAL_XIRCOM_MODULE)
96 #define XIRCOM
97#else
98 #undef XIRCOM
99#endif
100
101/*
102 * Version Information
103 */
104#define DRIVER_VERSION "v1.1"
105#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>"
106#define DRIVER_DESC "USB Keyspan PDA Converter driver"
107
108struct keyspan_pda_private {
109 int tx_room;
110 int tx_throttled;
111 struct work_struct wakeup_work;
112 struct work_struct unthrottle_work;
113 struct usb_serial *serial;
114 struct usb_serial_port *port;
115};
116
117
118#define KEYSPAN_VENDOR_ID 0x06cd
119#define KEYSPAN_PDA_FAKE_ID 0x0103
120#define KEYSPAN_PDA_ID 0x0104 /* no clue */
121
122/* For Xircom PGSDB9 and older Entregra version of the same device */
123#define XIRCOM_VENDOR_ID 0x085a
124#define XIRCOM_FAKE_ID 0x8027
125#define ENTREGRA_VENDOR_ID 0x1645
126#define ENTREGRA_FAKE_ID 0x8093
127
128static const struct usb_device_id id_table_combined[] = {
129#ifdef KEYSPAN
130 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
131#endif
132#ifdef XIRCOM
133 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
134 { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
135#endif
136 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
137 { } /* Terminating entry */
138};
139
140MODULE_DEVICE_TABLE(usb, id_table_combined);
141
142static struct usb_driver keyspan_pda_driver = {
143 .name = "keyspan_pda",
144 .probe = usb_serial_probe,
145 .disconnect = usb_serial_disconnect,
146 .id_table = id_table_combined,
147 .no_dynamic_id = 1,
148};
149
150static const struct usb_device_id id_table_std[] = {
151 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
152 { } /* Terminating entry */
153};
154
155#ifdef KEYSPAN
156static const struct usb_device_id id_table_fake[] = {
157 { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
158 { } /* Terminating entry */
159};
160#endif
161
162#ifdef XIRCOM
163static const struct usb_device_id id_table_fake_xircom[] = {
164 { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
165 { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
166 { }
167};
168#endif
169
170static void keyspan_pda_wakeup_write(struct work_struct *work)
171{
172 struct keyspan_pda_private *priv =
173 container_of(work, struct keyspan_pda_private, wakeup_work);
174 struct usb_serial_port *port = priv->port;
175 struct tty_struct *tty = tty_port_tty_get(&port->port);
176 if (tty)
177 tty_wakeup(tty);
178 tty_kref_put(tty);
179}
180
181static void keyspan_pda_request_unthrottle(struct work_struct *work)
182{
183 struct keyspan_pda_private *priv =
184 container_of(work, struct keyspan_pda_private, unthrottle_work);
185 struct usb_serial *serial = priv->serial;
186 int result;
187
188 dbg(" request_unthrottle");
189 /* ask the device to tell us when the tx buffer becomes
190 sufficiently empty */
191 result = usb_control_msg(serial->dev,
192 usb_sndctrlpipe(serial->dev, 0),
193 7, /* request_unthrottle */
194 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
195 | USB_DIR_OUT,
196 16, /* value: threshold */
197 0, /* index */
198 NULL,
199 0,
200 2000);
201 if (result < 0)
202 dbg("%s - error %d from usb_control_msg",
203 __func__, result);
204}
205
206
207static void keyspan_pda_rx_interrupt(struct urb *urb)
208{
209 struct usb_serial_port *port = urb->context;
210 struct tty_struct *tty;
211 unsigned char *data = urb->transfer_buffer;
212 int retval;
213 int status = urb->status;
214 struct keyspan_pda_private *priv;
215 priv = usb_get_serial_port_data(port);
216
217 switch (status) {
218 case 0:
219 /* success */
220 break;
221 case -ECONNRESET:
222 case -ENOENT:
223 case -ESHUTDOWN:
224 /* this urb is terminated, clean up */
225 dbg("%s - urb shutting down with status: %d",
226 __func__, status);
227 return;
228 default:
229 dbg("%s - nonzero urb status received: %d",
230 __func__, status);
231 goto exit;
232 }
233
234 /* see if the message is data or a status interrupt */
235 switch (data[0]) {
236 case 0:
237 tty = tty_port_tty_get(&port->port);
238 /* rest of message is rx data */
239 if (tty && urb->actual_length) {
240 tty_insert_flip_string(tty, data + 1,
241 urb->actual_length - 1);
242 tty_flip_buffer_push(tty);
243 }
244 tty_kref_put(tty);
245 break;
246 case 1:
247 /* status interrupt */
248 dbg(" rx int, d1=%d, d2=%d", data[1], data[2]);
249 switch (data[1]) {
250 case 1: /* modemline change */
251 break;
252 case 2: /* tx unthrottle interrupt */
253 priv->tx_throttled = 0;
254 /* queue up a wakeup at scheduler time */
255 schedule_work(&priv->wakeup_work);
256 break;
257 default:
258 break;
259 }
260 break;
261 default:
262 break;
263 }
264
265exit:
266 retval = usb_submit_urb(urb, GFP_ATOMIC);
267 if (retval)
268 dev_err(&port->dev,
269 "%s - usb_submit_urb failed with result %d",
270 __func__, retval);
271}
272
273
274static void keyspan_pda_rx_throttle(struct tty_struct *tty)
275{
276 /* stop receiving characters. We just turn off the URB request, and
277 let chars pile up in the device. If we're doing hardware
278 flowcontrol, the device will signal the other end when its buffer
279 fills up. If we're doing XON/XOFF, this would be a good time to
280 send an XOFF, although it might make sense to foist that off
281 upon the device too. */
282 struct usb_serial_port *port = tty->driver_data;
283 dbg("keyspan_pda_rx_throttle port %d", port->number);
284 usb_kill_urb(port->interrupt_in_urb);
285}
286
287
288static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
289{
290 struct usb_serial_port *port = tty->driver_data;
291 /* just restart the receive interrupt URB */
292 dbg("keyspan_pda_rx_unthrottle port %d", port->number);
293 port->interrupt_in_urb->dev = port->serial->dev;
294 if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
295 dbg(" usb_submit_urb(read urb) failed");
296}
297
298
299static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud)
300{
301 int rc;
302 int bindex;
303
304 switch (baud) {
305 case 110:
306 bindex = 0;
307 break;
308 case 300:
309 bindex = 1;
310 break;
311 case 1200:
312 bindex = 2;
313 break;
314 case 2400:
315 bindex = 3;
316 break;
317 case 4800:
318 bindex = 4;
319 break;
320 case 9600:
321 bindex = 5;
322 break;
323 case 19200:
324 bindex = 6;
325 break;
326 case 38400:
327 bindex = 7;
328 break;
329 case 57600:
330 bindex = 8;
331 break;
332 case 115200:
333 bindex = 9;
334 break;
335 default:
336 bindex = 5; /* Default to 9600 */
337 baud = 9600;
338 }
339
340 /* rather than figure out how to sleep while waiting for this
341 to complete, I just use the "legacy" API. */
342 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
343 0, /* set baud */
344 USB_TYPE_VENDOR
345 | USB_RECIP_INTERFACE
346 | USB_DIR_OUT, /* type */
347 bindex, /* value */
348 0, /* index */
349 NULL, /* &data */
350 0, /* size */
351 2000); /* timeout */
352 if (rc < 0)
353 return 0;
354 return baud;
355}
356
357
358static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
359{
360 struct usb_serial_port *port = tty->driver_data;
361 struct usb_serial *serial = port->serial;
362 int value;
363 int result;
364
365 if (break_state == -1)
366 value = 1; /* start break */
367 else
368 value = 0; /* clear break */
369 result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
370 4, /* set break */
371 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
372 value, 0, NULL, 0, 2000);
373 if (result < 0)
374 dbg("%s - error %d from usb_control_msg",
375 __func__, result);
376 /* there is something funky about this.. the TCSBRK that 'cu' performs
377 ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4
378 seconds apart, but it feels like the break sent isn't as long as it
379 is on /dev/ttyS0 */
380}
381
382
383static void keyspan_pda_set_termios(struct tty_struct *tty,
384 struct usb_serial_port *port, struct ktermios *old_termios)
385{
386 struct usb_serial *serial = port->serial;
387 speed_t speed;
388
389 /* cflag specifies lots of stuff: number of stop bits, parity, number
390 of data bits, baud. What can the device actually handle?:
391 CSTOPB (1 stop bit or 2)
392 PARENB (parity)
393 CSIZE (5bit .. 8bit)
394 There is minimal hw support for parity (a PSW bit seems to hold the
395 parity of whatever is in the accumulator). The UART either deals
396 with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data,
397 1 special, stop). So, with firmware changes, we could do:
398 8N1: 10 bit
399 8N2: 11 bit, extra bit always (mark?)
400 8[EOMS]1: 11 bit, extra bit is parity
401 7[EOMS]1: 10 bit, b0/b7 is parity
402 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
403
404 HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS
405 bit.
406
407 For now, just do baud. */
408
409 speed = tty_get_baud_rate(tty);
410 speed = keyspan_pda_setbaud(serial, speed);
411
412 if (speed == 0) {
413 dbg("can't handle requested baud rate");
414 /* It hasn't changed so.. */
415 speed = tty_termios_baud_rate(old_termios);
416 }
417 /* Only speed can change so copy the old h/w parameters
418 then encode the new speed */
419 tty_termios_copy_hw(tty->termios, old_termios);
420 tty_encode_baud_rate(tty, speed, speed);
421}
422
423
424/* modem control pins: DTR and RTS are outputs and can be controlled.
425 DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be
426 read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused */
427
428static int keyspan_pda_get_modem_info(struct usb_serial *serial,
429 unsigned char *value)
430{
431 int rc;
432 u8 *data;
433
434 data = kmalloc(1, GFP_KERNEL);
435 if (!data)
436 return -ENOMEM;
437
438 rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
439 3, /* get pins */
440 USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
441 0, 0, data, 1, 2000);
442 if (rc >= 0)
443 *value = *data;
444
445 kfree(data);
446 return rc;
447}
448
449
450static int keyspan_pda_set_modem_info(struct usb_serial *serial,
451 unsigned char value)
452{
453 int rc;
454 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
455 3, /* set pins */
456 USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT,
457 value, 0, NULL, 0, 2000);
458 return rc;
459}
460
461static int keyspan_pda_tiocmget(struct tty_struct *tty)
462{
463 struct usb_serial_port *port = tty->driver_data;
464 struct usb_serial *serial = port->serial;
465 int rc;
466 unsigned char status;
467 int value;
468
469 rc = keyspan_pda_get_modem_info(serial, &status);
470 if (rc < 0)
471 return rc;
472 value =
473 ((status & (1<<7)) ? TIOCM_DTR : 0) |
474 ((status & (1<<6)) ? TIOCM_CAR : 0) |
475 ((status & (1<<5)) ? TIOCM_RNG : 0) |
476 ((status & (1<<4)) ? TIOCM_DSR : 0) |
477 ((status & (1<<3)) ? TIOCM_CTS : 0) |
478 ((status & (1<<2)) ? TIOCM_RTS : 0);
479 return value;
480}
481
482static int keyspan_pda_tiocmset(struct tty_struct *tty,
483 unsigned int set, unsigned int clear)
484{
485 struct usb_serial_port *port = tty->driver_data;
486 struct usb_serial *serial = port->serial;
487 int rc;
488 unsigned char status;
489
490 rc = keyspan_pda_get_modem_info(serial, &status);
491 if (rc < 0)
492 return rc;
493
494 if (set & TIOCM_RTS)
495 status |= (1<<2);
496 if (set & TIOCM_DTR)
497 status |= (1<<7);
498
499 if (clear & TIOCM_RTS)
500 status &= ~(1<<2);
501 if (clear & TIOCM_DTR)
502 status &= ~(1<<7);
503 rc = keyspan_pda_set_modem_info(serial, status);
504 return rc;
505}
506
507static int keyspan_pda_write(struct tty_struct *tty,
508 struct usb_serial_port *port, const unsigned char *buf, int count)
509{
510 struct usb_serial *serial = port->serial;
511 int request_unthrottle = 0;
512 int rc = 0;
513 struct keyspan_pda_private *priv;
514
515 priv = usb_get_serial_port_data(port);
516 /* guess how much room is left in the device's ring buffer, and if we
517 want to send more than that, check first, updating our notion of
518 what is left. If our write will result in no room left, ask the
519 device to give us an interrupt when the room available rises above
520 a threshold, and hold off all writers (eventually, those using
521 select() or poll() too) until we receive that unthrottle interrupt.
522 Block if we can't write anything at all, otherwise write as much as
523 we can. */
524 dbg("keyspan_pda_write(%d)", count);
525 if (count == 0) {
526 dbg(" write request of 0 bytes");
527 return 0;
528 }
529
530 /* we might block because of:
531 the TX urb is in-flight (wait until it completes)
532 the device is full (wait until it says there is room)
533 */
534 spin_lock_bh(&port->lock);
535 if (port->write_urb_busy || priv->tx_throttled) {
536 spin_unlock_bh(&port->lock);
537 return 0;
538 }
539 port->write_urb_busy = 1;
540 spin_unlock_bh(&port->lock);
541
542 /* At this point the URB is in our control, nobody else can submit it
543 again (the only sudden transition was the one from EINPROGRESS to
544 finished). Also, the tx process is not throttled. So we are
545 ready to write. */
546
547 count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
548
549 /* Check if we might overrun the Tx buffer. If so, ask the
550 device how much room it really has. This is done only on
551 scheduler time, since usb_control_msg() sleeps. */
552 if (count > priv->tx_room && !in_interrupt()) {
553 u8 *room;
554
555 room = kmalloc(1, GFP_KERNEL);
556 if (!room) {
557 rc = -ENOMEM;
558 goto exit;
559 }
560
561 rc = usb_control_msg(serial->dev,
562 usb_rcvctrlpipe(serial->dev, 0),
563 6, /* write_room */
564 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
565 | USB_DIR_IN,
566 0, /* value: 0 means "remaining room" */
567 0, /* index */
568 room,
569 1,
570 2000);
571 if (rc > 0) {
572 dbg(" roomquery says %d", *room);
573 priv->tx_room = *room;
574 }
575 kfree(room);
576 if (rc < 0) {
577 dbg(" roomquery failed");
578 goto exit;
579 }
580 if (rc == 0) {
581 dbg(" roomquery returned 0 bytes");
582 rc = -EIO; /* device didn't return any data */
583 goto exit;
584 }
585 }
586 if (count > priv->tx_room) {
587 /* we're about to completely fill the Tx buffer, so
588 we'll be throttled afterwards. */
589 count = priv->tx_room;
590 request_unthrottle = 1;
591 }
592
593 if (count) {
594 /* now transfer data */
595 memcpy(port->write_urb->transfer_buffer, buf, count);
596 /* send the data out the bulk port */
597 port->write_urb->transfer_buffer_length = count;
598
599 priv->tx_room -= count;
600
601 port->write_urb->dev = port->serial->dev;
602 rc = usb_submit_urb(port->write_urb, GFP_ATOMIC);
603 if (rc) {
604 dbg(" usb_submit_urb(write bulk) failed");
605 goto exit;
606 }
607 } else {
608 /* There wasn't any room left, so we are throttled until
609 the buffer empties a bit */
610 request_unthrottle = 1;
611 }
612
613 if (request_unthrottle) {
614 priv->tx_throttled = 1; /* block writers */
615 schedule_work(&priv->unthrottle_work);
616 }
617
618 rc = count;
619exit:
620 if (rc < 0)
621 port->write_urb_busy = 0;
622 return rc;
623}
624
625
626static void keyspan_pda_write_bulk_callback(struct urb *urb)
627{
628 struct usb_serial_port *port = urb->context;
629 struct keyspan_pda_private *priv;
630
631 port->write_urb_busy = 0;
632 priv = usb_get_serial_port_data(port);
633
634 /* queue up a wakeup at scheduler time */
635 schedule_work(&priv->wakeup_work);
636}
637
638
639static int keyspan_pda_write_room(struct tty_struct *tty)
640{
641 struct usb_serial_port *port = tty->driver_data;
642 struct keyspan_pda_private *priv;
643 priv = usb_get_serial_port_data(port);
644 /* used by n_tty.c for processing of tabs and such. Giving it our
645 conservative guess is probably good enough, but needs testing by
646 running a console through the device. */
647 return priv->tx_room;
648}
649
650
651static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
652{
653 struct usb_serial_port *port = tty->driver_data;
654 struct keyspan_pda_private *priv;
655 unsigned long flags;
656 int ret = 0;
657
658 priv = usb_get_serial_port_data(port);
659
660 /* when throttled, return at least WAKEUP_CHARS to tell select() (via
661 n_tty.c:normal_poll() ) that we're not writeable. */
662
663 spin_lock_irqsave(&port->lock, flags);
664 if (port->write_urb_busy || priv->tx_throttled)
665 ret = 256;
666 spin_unlock_irqrestore(&port->lock, flags);
667 return ret;
668}
669
670
671static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on)
672{
673 struct usb_serial *serial = port->serial;
674
675 if (serial->dev) {
676 if (on)
677 keyspan_pda_set_modem_info(serial, (1<<7) | (1<< 2));
678 else
679 keyspan_pda_set_modem_info(serial, 0);
680 }
681}
682
683
684static int keyspan_pda_open(struct tty_struct *tty,
685 struct usb_serial_port *port)
686{
687 struct usb_serial *serial = port->serial;
688 u8 *room;
689 int rc = 0;
690 struct keyspan_pda_private *priv;
691
692 /* find out how much room is in the Tx ring */
693 room = kmalloc(1, GFP_KERNEL);
694 if (!room)
695 return -ENOMEM;
696
697 rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
698 6, /* write_room */
699 USB_TYPE_VENDOR | USB_RECIP_INTERFACE
700 | USB_DIR_IN,
701 0, /* value */
702 0, /* index */
703 room,
704 1,
705 2000);
706 if (rc < 0) {
707 dbg("%s - roomquery failed", __func__);
708 goto error;
709 }
710 if (rc == 0) {
711 dbg("%s - roomquery returned 0 bytes", __func__);
712 rc = -EIO;
713 goto error;
714 }
715 priv = usb_get_serial_port_data(port);
716 priv->tx_room = *room;
717 priv->tx_throttled = *room ? 0 : 1;
718
719 /*Start reading from the device*/
720 port->interrupt_in_urb->dev = serial->dev;
721 rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
722 if (rc) {
723 dbg("%s - usb_submit_urb(read int) failed", __func__);
724 goto error;
725 }
726error:
727 kfree(room);
728 return rc;
729}
730static void keyspan_pda_close(struct usb_serial_port *port)
731{
732 struct usb_serial *serial = port->serial;
733
734 if (serial->dev) {
735 /* shutdown our bulk reads and writes */
736 usb_kill_urb(port->write_urb);
737 usb_kill_urb(port->interrupt_in_urb);
738 }
739}
740
741
742/* download the firmware to a "fake" device (pre-renumeration) */
743static int keyspan_pda_fake_startup(struct usb_serial *serial)
744{
745 int response;
746 const char *fw_name;
747 const struct ihex_binrec *record;
748 const struct firmware *fw;
749
750 /* download the firmware here ... */
751 response = ezusb_set_reset(serial, 1);
752
753 if (0) { ; }
754#ifdef KEYSPAN
755 else if (le16_to_cpu(serial->dev->descriptor.idVendor) == KEYSPAN_VENDOR_ID)
756 fw_name = "keyspan_pda/keyspan_pda.fw";
757#endif
758#ifdef XIRCOM
759 else if ((le16_to_cpu(serial->dev->descriptor.idVendor) == XIRCOM_VENDOR_ID) ||
760 (le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGRA_VENDOR_ID))
761 fw_name = "keyspan_pda/xircom_pgs.fw";
762#endif
763 else {
764 dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
765 __func__);
766 return -ENODEV;
767 }
768 if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
769 dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
770 fw_name);
771 return -ENOENT;
772 }
773 record = (const struct ihex_binrec *)fw->data;
774
775 while (record) {
776 response = ezusb_writememory(serial, be32_to_cpu(record->addr),
777 (unsigned char *)record->data,
778 be16_to_cpu(record->len), 0xa0);
779 if (response < 0) {
780 dev_err(&serial->dev->dev, "ezusb_writememory failed "
781 "for Keyspan PDA firmware (%d %04X %p %d)\n",
782 response, be32_to_cpu(record->addr),
783 record->data, be16_to_cpu(record->len));
784 break;
785 }
786 record = ihex_next_binrec(record);
787 }
788 release_firmware(fw);
789 /* bring device out of reset. Renumeration will occur in a moment
790 and the new device will bind to the real driver */
791 response = ezusb_set_reset(serial, 0);
792
793 /* we want this device to fail to have a driver assigned to it. */
794 return 1;
795}
796
797#ifdef KEYSPAN
798MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
799#endif
800#ifdef XIRCOM
801MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
802#endif
803
804static int keyspan_pda_startup(struct usb_serial *serial)
805{
806
807 struct keyspan_pda_private *priv;
808
809 /* allocate the private data structures for all ports. Well, for all
810 one ports. */
811
812 priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL);
813 if (!priv)
814 return 1; /* error */
815 usb_set_serial_port_data(serial->port[0], priv);
816 init_waitqueue_head(&serial->port[0]->write_wait);
817 INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write);
818 INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle);
819 priv->serial = serial;
820 priv->port = serial->port[0];
821 return 0;
822}
823
824static void keyspan_pda_release(struct usb_serial *serial)
825{
826 dbg("%s", __func__);
827
828 kfree(usb_get_serial_port_data(serial->port[0]));
829}
830
831#ifdef KEYSPAN
832static struct usb_serial_driver keyspan_pda_fake_device = {
833 .driver = {
834 .owner = THIS_MODULE,
835 .name = "keyspan_pda_pre",
836 },
837 .description = "Keyspan PDA - (prerenumeration)",
838 .usb_driver = &keyspan_pda_driver,
839 .id_table = id_table_fake,
840 .num_ports = 1,
841 .attach = keyspan_pda_fake_startup,
842};
843#endif
844
845#ifdef XIRCOM
846static struct usb_serial_driver xircom_pgs_fake_device = {
847 .driver = {
848 .owner = THIS_MODULE,
849 .name = "xircom_no_firm",
850 },
851 .description = "Xircom / Entregra PGS - (prerenumeration)",
852 .usb_driver = &keyspan_pda_driver,
853 .id_table = id_table_fake_xircom,
854 .num_ports = 1,
855 .attach = keyspan_pda_fake_startup,
856};
857#endif
858
859static struct usb_serial_driver keyspan_pda_device = {
860 .driver = {
861 .owner = THIS_MODULE,
862 .name = "keyspan_pda",
863 },
864 .description = "Keyspan PDA",
865 .usb_driver = &keyspan_pda_driver,
866 .id_table = id_table_std,
867 .num_ports = 1,
868 .dtr_rts = keyspan_pda_dtr_rts,
869 .open = keyspan_pda_open,
870 .close = keyspan_pda_close,
871 .write = keyspan_pda_write,
872 .write_room = keyspan_pda_write_room,
873 .write_bulk_callback = keyspan_pda_write_bulk_callback,
874 .read_int_callback = keyspan_pda_rx_interrupt,
875 .chars_in_buffer = keyspan_pda_chars_in_buffer,
876 .throttle = keyspan_pda_rx_throttle,
877 .unthrottle = keyspan_pda_rx_unthrottle,
878 .set_termios = keyspan_pda_set_termios,
879 .break_ctl = keyspan_pda_break_ctl,
880 .tiocmget = keyspan_pda_tiocmget,
881 .tiocmset = keyspan_pda_tiocmset,
882 .attach = keyspan_pda_startup,
883 .release = keyspan_pda_release,
884};
885
886
887static int __init keyspan_pda_init(void)
888{
889 int retval;
890 retval = usb_serial_register(&keyspan_pda_device);
891 if (retval)
892 goto failed_pda_register;
893#ifdef KEYSPAN
894 retval = usb_serial_register(&keyspan_pda_fake_device);
895 if (retval)
896 goto failed_pda_fake_register;
897#endif
898#ifdef XIRCOM
899 retval = usb_serial_register(&xircom_pgs_fake_device);
900 if (retval)
901 goto failed_xircom_register;
902#endif
903 retval = usb_register(&keyspan_pda_driver);
904 if (retval)
905 goto failed_usb_register;
906 printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
907 DRIVER_DESC "\n");
908 return 0;
909failed_usb_register:
910#ifdef XIRCOM
911 usb_serial_deregister(&xircom_pgs_fake_device);
912failed_xircom_register:
913#endif /* XIRCOM */
914#ifdef KEYSPAN
915 usb_serial_deregister(&keyspan_pda_fake_device);
916#endif
917#ifdef KEYSPAN
918failed_pda_fake_register:
919#endif
920 usb_serial_deregister(&keyspan_pda_device);
921failed_pda_register:
922 return retval;
923}
924
925
926static void __exit keyspan_pda_exit(void)
927{
928 usb_deregister(&keyspan_pda_driver);
929 usb_serial_deregister(&keyspan_pda_device);
930#ifdef KEYSPAN
931 usb_serial_deregister(&keyspan_pda_fake_device);
932#endif
933#ifdef XIRCOM
934 usb_serial_deregister(&xircom_pgs_fake_device);
935#endif
936}
937
938
939module_init(keyspan_pda_init);
940module_exit(keyspan_pda_exit);
941
942MODULE_AUTHOR(DRIVER_AUTHOR);
943MODULE_DESCRIPTION(DRIVER_DESC);
944MODULE_LICENSE("GPL");
945
946module_param(debug, bool, S_IRUGO | S_IWUSR);
947MODULE_PARM_DESC(debug, "Debug enabled or not");
948