Loading...
Note: File does not exist in v6.8.
1/*
2 * PMC MSP EHCI (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 2006-2010 PMC-Sierra Inc
5 *
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
8 * for more details.
9 *
10 */
11
12/* includes */
13#include <linux/platform_device.h>
14#include <linux/gpio.h>
15#include <linux/usb.h>
16#include <msp_usb.h>
17
18/* stream disable*/
19#define USB_CTRL_MODE_STREAM_DISABLE 0x10
20
21/* threshold */
22#define USB_CTRL_FIFO_THRESH 0x00300000
23
24/* register offset for usb_mode */
25#define USB_EHCI_REG_USB_MODE 0x68
26
27/* register offset for usb fifo */
28#define USB_EHCI_REG_USB_FIFO 0x24
29
30/* register offset for usb status */
31#define USB_EHCI_REG_USB_STATUS 0x44
32
33/* serial/parallel transceiver */
34#define USB_EHCI_REG_BIT_STAT_STS (1<<29)
35
36/* TWI USB0 host device pin */
37#define MSP_PIN_USB0_HOST_DEV 49
38
39/* TWI USB1 host device pin */
40#define MSP_PIN_USB1_HOST_DEV 50
41
42
43static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci)
44{
45 u8 *base;
46 u8 *statreg;
47 u8 *fiforeg;
48 u32 val;
49 struct ehci_regs *reg_base = ehci->regs;
50
51 /* get register base */
52 base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE;
53 statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS;
54 fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO;
55
56 /* Disable controller mode stream */
57 val = ehci_readl(ehci, (u32 *)base);
58 ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE),
59 (u32 *)base);
60
61 /* clear STS to select parallel transceiver interface */
62 val = ehci_readl(ehci, (u32 *)statreg);
63 val = val & ~USB_EHCI_REG_BIT_STAT_STS;
64 ehci_writel(ehci, val, (u32 *)statreg);
65
66 /* write to set the proper fifo threshold */
67 ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg);
68
69 /* set TWI GPIO USB_HOST_DEV pin high */
70 gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1);
71#ifdef CONFIG_MSP_HAS_DUAL_USB
72 gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1);
73#endif
74}
75
76/* called during probe() after chip reset completes */
77static int ehci_msp_setup(struct usb_hcd *hcd)
78{
79 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
80 int retval;
81 ehci->big_endian_mmio = 1;
82 ehci->big_endian_desc = 1;
83
84 ehci->caps = hcd->regs;
85 ehci->regs = hcd->regs +
86 HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
87 dbg_hcs_params(ehci, "reset");
88 dbg_hcc_params(ehci, "reset");
89
90 /* cache this readonly data; minimize chip reads */
91 ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
92 hcd->has_tt = 1;
93
94 retval = ehci_halt(ehci);
95 if (retval)
96 return retval;
97
98 ehci_reset(ehci);
99
100 /* data structure init */
101 retval = ehci_init(hcd);
102 if (retval)
103 return retval;
104
105 usb_hcd_tdi_set_mode(ehci);
106 ehci_port_power(ehci, 0);
107
108 return retval;
109}
110
111
112/* configure so an HC device and id are always provided
113 * always called with process context; sleeping is OK
114 */
115
116static int usb_hcd_msp_map_regs(struct mspusb_device *dev)
117{
118 struct resource *res;
119 struct platform_device *pdev = &dev->dev;
120 u32 res_len;
121 int retval;
122
123 /* MAB register space */
124 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
125 if (res == NULL)
126 return -ENOMEM;
127 res_len = resource_size(res);
128 if (!request_mem_region(res->start, res_len, "mab regs"))
129 return -EBUSY;
130
131 dev->mab_regs = ioremap_nocache(res->start, res_len);
132 if (dev->mab_regs == NULL) {
133 retval = -ENOMEM;
134 goto err1;
135 }
136
137 /* MSP USB register space */
138 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
139 if (res == NULL) {
140 retval = -ENOMEM;
141 goto err2;
142 }
143 res_len = resource_size(res);
144 if (!request_mem_region(res->start, res_len, "usbid regs")) {
145 retval = -EBUSY;
146 goto err2;
147 }
148 dev->usbid_regs = ioremap_nocache(res->start, res_len);
149 if (dev->usbid_regs == NULL) {
150 retval = -ENOMEM;
151 goto err3;
152 }
153
154 return 0;
155err3:
156 res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
157 res_len = resource_size(res);
158 release_mem_region(res->start, res_len);
159err2:
160 iounmap(dev->mab_regs);
161err1:
162 res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
163 res_len = resource_size(res);
164 release_mem_region(res->start, res_len);
165 dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n");
166 return retval;
167}
168
169/**
170 * usb_hcd_msp_probe - initialize PMC MSP-based HCDs
171 * Context: !in_interrupt()
172 *
173 * Allocates basic resources for this USB host controller, and
174 * then invokes the start() method for the HCD associated with it
175 * through the hotplug entry's driver_data.
176 *
177 */
178int usb_hcd_msp_probe(const struct hc_driver *driver,
179 struct platform_device *dev)
180{
181 int retval;
182 struct usb_hcd *hcd;
183 struct resource *res;
184 struct ehci_hcd *ehci ;
185
186 hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp");
187 if (!hcd)
188 return -ENOMEM;
189
190 res = platform_get_resource(dev, IORESOURCE_MEM, 0);
191 if (res == NULL) {
192 pr_debug("No IOMEM resource info for %s.\n", dev->name);
193 retval = -ENOMEM;
194 goto err1;
195 }
196 hcd->rsrc_start = res->start;
197 hcd->rsrc_len = resource_size(res);
198 if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) {
199 retval = -EBUSY;
200 goto err1;
201 }
202 hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
203 if (!hcd->regs) {
204 pr_debug("ioremap failed");
205 retval = -ENOMEM;
206 goto err2;
207 }
208
209 res = platform_get_resource(dev, IORESOURCE_IRQ, 0);
210 if (res == NULL) {
211 dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name);
212 retval = -ENOMEM;
213 goto err3;
214 }
215
216 /* Map non-EHCI register spaces */
217 retval = usb_hcd_msp_map_regs(to_mspusb_device(dev));
218 if (retval != 0)
219 goto err3;
220
221 ehci = hcd_to_ehci(hcd);
222 ehci->big_endian_mmio = 1;
223 ehci->big_endian_desc = 1;
224
225
226 retval = usb_add_hcd(hcd, res->start, IRQF_SHARED);
227 if (retval == 0)
228 return 0;
229
230 usb_remove_hcd(hcd);
231err3:
232 iounmap(hcd->regs);
233err2:
234 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
235err1:
236 usb_put_hcd(hcd);
237
238 return retval;
239}
240
241
242
243/**
244 * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs
245 * @dev: USB Host Controller being removed
246 * Context: !in_interrupt()
247 *
248 * Reverses the effect of usb_hcd_msp_probe(), first invoking
249 * the HCD's stop() method. It is always called from a thread
250 * context, normally "rmmod", "apmd", or something similar.
251 *
252 * may be called without controller electrically present
253 * may be called with controller, bus, and devices active
254 */
255void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev)
256{
257 usb_remove_hcd(hcd);
258 iounmap(hcd->regs);
259 release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
260 usb_put_hcd(hcd);
261}
262
263#ifdef CONFIG_MSP_HAS_DUAL_USB
264/*
265 * Wrapper around the main ehci_irq. Since both USB host controllers are
266 * sharing the same IRQ, need to first determine whether we're the intended
267 * recipient of this interrupt.
268 */
269static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd)
270{
271 u32 int_src;
272 struct device *dev = hcd->self.controller;
273 struct platform_device *pdev;
274 struct mspusb_device *mdev;
275 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
276 /* need to reverse-map a couple of containers to get our device */
277 pdev = to_platform_device(dev);
278 mdev = to_mspusb_device(pdev);
279
280 /* Check to see if this interrupt is for this host controller */
281 int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat);
282 if (int_src & (1 << pdev->id))
283 return ehci_irq(hcd);
284
285 /* Not for this device */
286 return IRQ_NONE;
287}
288#endif /* DUAL_USB */
289
290static const struct hc_driver ehci_msp_hc_driver = {
291 .description = hcd_name,
292 .product_desc = "PMC MSP EHCI",
293 .hcd_priv_size = sizeof(struct ehci_hcd),
294
295 /*
296 * generic hardware linkage
297 */
298#ifdef CONFIG_MSP_HAS_DUAL_USB
299 .irq = ehci_msp_irq,
300#else
301 .irq = ehci_irq,
302#endif
303 .flags = HCD_MEMORY | HCD_USB2,
304
305 /*
306 * basic lifecycle operations
307 */
308 .reset = ehci_msp_setup,
309 .start = ehci_run,
310 .shutdown = ehci_shutdown,
311 .start = ehci_run,
312 .stop = ehci_stop,
313
314 /*
315 * managing i/o requests and associated device resources
316 */
317 .urb_enqueue = ehci_urb_enqueue,
318 .urb_dequeue = ehci_urb_dequeue,
319 .endpoint_disable = ehci_endpoint_disable,
320 .endpoint_reset = ehci_endpoint_reset,
321
322 /*
323 * scheduling support
324 */
325 .get_frame_number = ehci_get_frame,
326
327 /*
328 * root hub support
329 */
330 .hub_status_data = ehci_hub_status_data,
331 .hub_control = ehci_hub_control,
332 .bus_suspend = ehci_bus_suspend,
333 .bus_resume = ehci_bus_resume,
334 .relinquish_port = ehci_relinquish_port,
335 .port_handed_over = ehci_port_handed_over,
336
337 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
338};
339
340static int ehci_hcd_msp_drv_probe(struct platform_device *pdev)
341{
342 int ret;
343
344 pr_debug("In ehci_hcd_msp_drv_probe");
345
346 if (usb_disabled())
347 return -ENODEV;
348
349 gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO");
350#ifdef CONFIG_MSP_HAS_DUAL_USB
351 gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO");
352#endif
353
354 ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev);
355
356 return ret;
357}
358
359static int ehci_hcd_msp_drv_remove(struct platform_device *pdev)
360{
361 struct usb_hcd *hcd = platform_get_drvdata(pdev);
362
363 usb_hcd_msp_remove(hcd, pdev);
364
365 /* free TWI GPIO USB_HOST_DEV pin */
366 gpio_free(MSP_PIN_USB0_HOST_DEV);
367#ifdef CONFIG_MSP_HAS_DUAL_USB
368 gpio_free(MSP_PIN_USB1_HOST_DEV);
369#endif
370
371 return 0;
372}
373
374MODULE_ALIAS("pmcmsp-ehci");
375
376static struct platform_driver ehci_hcd_msp_driver = {
377 .probe = ehci_hcd_msp_drv_probe,
378 .remove = ehci_hcd_msp_drv_remove,
379 .driver = {
380 .name = "pmcmsp-ehci",
381 .owner = THIS_MODULE,
382 },
383};