Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * composite.c - infrastructure for Composite USB Gadgets
4 *
5 * Copyright (C) 2006-2008 David Brownell
6 */
7
8/* #define VERBOSE_DEBUG */
9
10#include <linux/kallsyms.h>
11#include <linux/kernel.h>
12#include <linux/slab.h>
13#include <linux/module.h>
14#include <linux/device.h>
15#include <linux/utsname.h>
16#include <linux/bitfield.h>
17#include <linux/uuid.h>
18
19#include <linux/usb/composite.h>
20#include <linux/usb/otg.h>
21#include <linux/usb/webusb.h>
22#include <asm/unaligned.h>
23
24#include "u_os_desc.h"
25
26/**
27 * struct usb_os_string - represents OS String to be reported by a gadget
28 * @bLength: total length of the entire descritor, always 0x12
29 * @bDescriptorType: USB_DT_STRING
30 * @qwSignature: the OS String proper
31 * @bMS_VendorCode: code used by the host for subsequent requests
32 * @bPad: not used, must be zero
33 */
34struct usb_os_string {
35 __u8 bLength;
36 __u8 bDescriptorType;
37 __u8 qwSignature[OS_STRING_QW_SIGN_LEN];
38 __u8 bMS_VendorCode;
39 __u8 bPad;
40} __packed;
41
42/*
43 * The code in this file is utility code, used to build a gadget driver
44 * from one or more "function" drivers, one or more "configuration"
45 * objects, and a "usb_composite_driver" by gluing them together along
46 * with the relevant device-wide data.
47 */
48
49static struct usb_gadget_strings **get_containers_gs(
50 struct usb_gadget_string_container *uc)
51{
52 return (struct usb_gadget_strings **)uc->stash;
53}
54
55/**
56 * function_descriptors() - get function descriptors for speed
57 * @f: the function
58 * @speed: the speed
59 *
60 * Returns the descriptors or NULL if not set.
61 */
62static struct usb_descriptor_header **
63function_descriptors(struct usb_function *f,
64 enum usb_device_speed speed)
65{
66 struct usb_descriptor_header **descriptors;
67
68 /*
69 * NOTE: we try to help gadget drivers which might not be setting
70 * max_speed appropriately.
71 */
72
73 switch (speed) {
74 case USB_SPEED_SUPER_PLUS:
75 descriptors = f->ssp_descriptors;
76 if (descriptors)
77 break;
78 fallthrough;
79 case USB_SPEED_SUPER:
80 descriptors = f->ss_descriptors;
81 if (descriptors)
82 break;
83 fallthrough;
84 case USB_SPEED_HIGH:
85 descriptors = f->hs_descriptors;
86 if (descriptors)
87 break;
88 fallthrough;
89 default:
90 descriptors = f->fs_descriptors;
91 }
92
93 /*
94 * if we can't find any descriptors at all, then this gadget deserves to
95 * Oops with a NULL pointer dereference
96 */
97
98 return descriptors;
99}
100
101/**
102 * next_desc() - advance to the next desc_type descriptor
103 * @t: currect pointer within descriptor array
104 * @desc_type: descriptor type
105 *
106 * Return: next desc_type descriptor or NULL
107 *
108 * Iterate over @t until either desc_type descriptor found or
109 * NULL (that indicates end of list) encountered
110 */
111static struct usb_descriptor_header**
112next_desc(struct usb_descriptor_header **t, u8 desc_type)
113{
114 for (; *t; t++) {
115 if ((*t)->bDescriptorType == desc_type)
116 return t;
117 }
118 return NULL;
119}
120
121/*
122 * for_each_desc() - iterate over desc_type descriptors in the
123 * descriptors list
124 * @start: pointer within descriptor array.
125 * @iter_desc: desc_type descriptor to use as the loop cursor
126 * @desc_type: wanted descriptr type
127 */
128#define for_each_desc(start, iter_desc, desc_type) \
129 for (iter_desc = next_desc(start, desc_type); \
130 iter_desc; iter_desc = next_desc(iter_desc + 1, desc_type))
131
132/**
133 * config_ep_by_speed_and_alt() - configures the given endpoint
134 * according to gadget speed.
135 * @g: pointer to the gadget
136 * @f: usb function
137 * @_ep: the endpoint to configure
138 * @alt: alternate setting number
139 *
140 * Return: error code, 0 on success
141 *
142 * This function chooses the right descriptors for a given
143 * endpoint according to gadget speed and saves it in the
144 * endpoint desc field. If the endpoint already has a descriptor
145 * assigned to it - overwrites it with currently corresponding
146 * descriptor. The endpoint maxpacket field is updated according
147 * to the chosen descriptor.
148 * Note: the supplied function should hold all the descriptors
149 * for supported speeds
150 */
151int config_ep_by_speed_and_alt(struct usb_gadget *g,
152 struct usb_function *f,
153 struct usb_ep *_ep,
154 u8 alt)
155{
156 struct usb_endpoint_descriptor *chosen_desc = NULL;
157 struct usb_interface_descriptor *int_desc = NULL;
158 struct usb_descriptor_header **speed_desc = NULL;
159
160 struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
161 int want_comp_desc = 0;
162
163 struct usb_descriptor_header **d_spd; /* cursor for speed desc */
164 struct usb_composite_dev *cdev;
165 bool incomplete_desc = false;
166
167 if (!g || !f || !_ep)
168 return -EIO;
169
170 /* select desired speed */
171 switch (g->speed) {
172 case USB_SPEED_SUPER_PLUS:
173 if (f->ssp_descriptors) {
174 speed_desc = f->ssp_descriptors;
175 want_comp_desc = 1;
176 break;
177 }
178 incomplete_desc = true;
179 fallthrough;
180 case USB_SPEED_SUPER:
181 if (f->ss_descriptors) {
182 speed_desc = f->ss_descriptors;
183 want_comp_desc = 1;
184 break;
185 }
186 incomplete_desc = true;
187 fallthrough;
188 case USB_SPEED_HIGH:
189 if (f->hs_descriptors) {
190 speed_desc = f->hs_descriptors;
191 break;
192 }
193 incomplete_desc = true;
194 fallthrough;
195 default:
196 speed_desc = f->fs_descriptors;
197 }
198
199 cdev = get_gadget_data(g);
200 if (incomplete_desc)
201 WARNING(cdev,
202 "%s doesn't hold the descriptors for current speed\n",
203 f->name);
204
205 /* find correct alternate setting descriptor */
206 for_each_desc(speed_desc, d_spd, USB_DT_INTERFACE) {
207 int_desc = (struct usb_interface_descriptor *)*d_spd;
208
209 if (int_desc->bAlternateSetting == alt) {
210 speed_desc = d_spd;
211 goto intf_found;
212 }
213 }
214 return -EIO;
215
216intf_found:
217 /* find descriptors */
218 for_each_desc(speed_desc, d_spd, USB_DT_ENDPOINT) {
219 chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
220 if (chosen_desc->bEndpointAddress == _ep->address)
221 goto ep_found;
222 }
223 return -EIO;
224
225ep_found:
226 /* commit results */
227 _ep->maxpacket = usb_endpoint_maxp(chosen_desc);
228 _ep->desc = chosen_desc;
229 _ep->comp_desc = NULL;
230 _ep->maxburst = 0;
231 _ep->mult = 1;
232
233 if (g->speed == USB_SPEED_HIGH && (usb_endpoint_xfer_isoc(_ep->desc) ||
234 usb_endpoint_xfer_int(_ep->desc)))
235 _ep->mult = usb_endpoint_maxp_mult(_ep->desc);
236
237 if (!want_comp_desc)
238 return 0;
239
240 /*
241 * Companion descriptor should follow EP descriptor
242 * USB 3.0 spec, #9.6.7
243 */
244 comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd);
245 if (!comp_desc ||
246 (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP))
247 return -EIO;
248 _ep->comp_desc = comp_desc;
249 if (g->speed >= USB_SPEED_SUPER) {
250 switch (usb_endpoint_type(_ep->desc)) {
251 case USB_ENDPOINT_XFER_ISOC:
252 /* mult: bits 1:0 of bmAttributes */
253 _ep->mult = (comp_desc->bmAttributes & 0x3) + 1;
254 fallthrough;
255 case USB_ENDPOINT_XFER_BULK:
256 case USB_ENDPOINT_XFER_INT:
257 _ep->maxburst = comp_desc->bMaxBurst + 1;
258 break;
259 default:
260 if (comp_desc->bMaxBurst != 0)
261 ERROR(cdev, "ep0 bMaxBurst must be 0\n");
262 _ep->maxburst = 1;
263 break;
264 }
265 }
266 return 0;
267}
268EXPORT_SYMBOL_GPL(config_ep_by_speed_and_alt);
269
270/**
271 * config_ep_by_speed() - configures the given endpoint
272 * according to gadget speed.
273 * @g: pointer to the gadget
274 * @f: usb function
275 * @_ep: the endpoint to configure
276 *
277 * Return: error code, 0 on success
278 *
279 * This function chooses the right descriptors for a given
280 * endpoint according to gadget speed and saves it in the
281 * endpoint desc field. If the endpoint already has a descriptor
282 * assigned to it - overwrites it with currently corresponding
283 * descriptor. The endpoint maxpacket field is updated according
284 * to the chosen descriptor.
285 * Note: the supplied function should hold all the descriptors
286 * for supported speeds
287 */
288int config_ep_by_speed(struct usb_gadget *g,
289 struct usb_function *f,
290 struct usb_ep *_ep)
291{
292 return config_ep_by_speed_and_alt(g, f, _ep, 0);
293}
294EXPORT_SYMBOL_GPL(config_ep_by_speed);
295
296/**
297 * usb_add_function() - add a function to a configuration
298 * @config: the configuration
299 * @function: the function being added
300 * Context: single threaded during gadget setup
301 *
302 * After initialization, each configuration must have one or more
303 * functions added to it. Adding a function involves calling its @bind()
304 * method to allocate resources such as interface and string identifiers
305 * and endpoints.
306 *
307 * This function returns the value of the function's bind(), which is
308 * zero for success else a negative errno value.
309 */
310int usb_add_function(struct usb_configuration *config,
311 struct usb_function *function)
312{
313 int value = -EINVAL;
314
315 DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n",
316 function->name, function,
317 config->label, config);
318
319 if (!function->set_alt || !function->disable)
320 goto done;
321
322 function->config = config;
323 list_add_tail(&function->list, &config->functions);
324
325 if (function->bind_deactivated) {
326 value = usb_function_deactivate(function);
327 if (value)
328 goto done;
329 }
330
331 /* REVISIT *require* function->bind? */
332 if (function->bind) {
333 value = function->bind(config, function);
334 if (value < 0) {
335 list_del(&function->list);
336 function->config = NULL;
337 }
338 } else
339 value = 0;
340
341 /* We allow configurations that don't work at both speeds.
342 * If we run into a lowspeed Linux system, treat it the same
343 * as full speed ... it's the function drivers that will need
344 * to avoid bulk and ISO transfers.
345 */
346 if (!config->fullspeed && function->fs_descriptors)
347 config->fullspeed = true;
348 if (!config->highspeed && function->hs_descriptors)
349 config->highspeed = true;
350 if (!config->superspeed && function->ss_descriptors)
351 config->superspeed = true;
352 if (!config->superspeed_plus && function->ssp_descriptors)
353 config->superspeed_plus = true;
354
355done:
356 if (value)
357 DBG(config->cdev, "adding '%s'/%p --> %d\n",
358 function->name, function, value);
359 return value;
360}
361EXPORT_SYMBOL_GPL(usb_add_function);
362
363void usb_remove_function(struct usb_configuration *c, struct usb_function *f)
364{
365 if (f->disable)
366 f->disable(f);
367
368 bitmap_zero(f->endpoints, 32);
369 list_del(&f->list);
370 if (f->unbind)
371 f->unbind(c, f);
372
373 if (f->bind_deactivated)
374 usb_function_activate(f);
375}
376EXPORT_SYMBOL_GPL(usb_remove_function);
377
378/**
379 * usb_function_deactivate - prevent function and gadget enumeration
380 * @function: the function that isn't yet ready to respond
381 *
382 * Blocks response of the gadget driver to host enumeration by
383 * preventing the data line pullup from being activated. This is
384 * normally called during @bind() processing to change from the
385 * initial "ready to respond" state, or when a required resource
386 * becomes available.
387 *
388 * For example, drivers that serve as a passthrough to a userspace
389 * daemon can block enumeration unless that daemon (such as an OBEX,
390 * MTP, or print server) is ready to handle host requests.
391 *
392 * Not all systems support software control of their USB peripheral
393 * data pullups.
394 *
395 * Returns zero on success, else negative errno.
396 */
397int usb_function_deactivate(struct usb_function *function)
398{
399 struct usb_composite_dev *cdev = function->config->cdev;
400 unsigned long flags;
401 int status = 0;
402
403 spin_lock_irqsave(&cdev->lock, flags);
404
405 if (cdev->deactivations == 0) {
406 spin_unlock_irqrestore(&cdev->lock, flags);
407 status = usb_gadget_deactivate(cdev->gadget);
408 spin_lock_irqsave(&cdev->lock, flags);
409 }
410 if (status == 0)
411 cdev->deactivations++;
412
413 spin_unlock_irqrestore(&cdev->lock, flags);
414 return status;
415}
416EXPORT_SYMBOL_GPL(usb_function_deactivate);
417
418/**
419 * usb_function_activate - allow function and gadget enumeration
420 * @function: function on which usb_function_activate() was called
421 *
422 * Reverses effect of usb_function_deactivate(). If no more functions
423 * are delaying their activation, the gadget driver will respond to
424 * host enumeration procedures.
425 *
426 * Returns zero on success, else negative errno.
427 */
428int usb_function_activate(struct usb_function *function)
429{
430 struct usb_composite_dev *cdev = function->config->cdev;
431 unsigned long flags;
432 int status = 0;
433
434 spin_lock_irqsave(&cdev->lock, flags);
435
436 if (WARN_ON(cdev->deactivations == 0))
437 status = -EINVAL;
438 else {
439 cdev->deactivations--;
440 if (cdev->deactivations == 0) {
441 spin_unlock_irqrestore(&cdev->lock, flags);
442 status = usb_gadget_activate(cdev->gadget);
443 spin_lock_irqsave(&cdev->lock, flags);
444 }
445 }
446
447 spin_unlock_irqrestore(&cdev->lock, flags);
448 return status;
449}
450EXPORT_SYMBOL_GPL(usb_function_activate);
451
452/**
453 * usb_interface_id() - allocate an unused interface ID
454 * @config: configuration associated with the interface
455 * @function: function handling the interface
456 * Context: single threaded during gadget setup
457 *
458 * usb_interface_id() is called from usb_function.bind() callbacks to
459 * allocate new interface IDs. The function driver will then store that
460 * ID in interface, association, CDC union, and other descriptors. It
461 * will also handle any control requests targeted at that interface,
462 * particularly changing its altsetting via set_alt(). There may
463 * also be class-specific or vendor-specific requests to handle.
464 *
465 * All interface identifier should be allocated using this routine, to
466 * ensure that for example different functions don't wrongly assign
467 * different meanings to the same identifier. Note that since interface
468 * identifiers are configuration-specific, functions used in more than
469 * one configuration (or more than once in a given configuration) need
470 * multiple versions of the relevant descriptors.
471 *
472 * Returns the interface ID which was allocated; or -ENODEV if no
473 * more interface IDs can be allocated.
474 */
475int usb_interface_id(struct usb_configuration *config,
476 struct usb_function *function)
477{
478 unsigned id = config->next_interface_id;
479
480 if (id < MAX_CONFIG_INTERFACES) {
481 config->interface[id] = function;
482 config->next_interface_id = id + 1;
483 return id;
484 }
485 return -ENODEV;
486}
487EXPORT_SYMBOL_GPL(usb_interface_id);
488
489/**
490 * usb_func_wakeup - sends function wake notification to the host.
491 * @func: function that sends the remote wakeup notification.
492 *
493 * Applicable to devices operating at enhanced superspeed when usb
494 * functions are put in function suspend state and armed for function
495 * remote wakeup. On completion, function wake notification is sent. If
496 * the device is in low power state it tries to bring the device to active
497 * state before sending the wake notification. Since it is a synchronous
498 * call, caller must take care of not calling it in interrupt context.
499 * For devices operating at lower speeds returns negative errno.
500 *
501 * Returns zero on success, else negative errno.
502 */
503int usb_func_wakeup(struct usb_function *func)
504{
505 struct usb_gadget *gadget = func->config->cdev->gadget;
506 int id;
507
508 if (!gadget->ops->func_wakeup)
509 return -EOPNOTSUPP;
510
511 if (!func->func_wakeup_armed) {
512 ERROR(func->config->cdev, "not armed for func remote wakeup\n");
513 return -EINVAL;
514 }
515
516 for (id = 0; id < MAX_CONFIG_INTERFACES; id++)
517 if (func->config->interface[id] == func)
518 break;
519
520 if (id == MAX_CONFIG_INTERFACES) {
521 ERROR(func->config->cdev, "Invalid function\n");
522 return -EINVAL;
523 }
524
525 return gadget->ops->func_wakeup(gadget, id);
526}
527EXPORT_SYMBOL_GPL(usb_func_wakeup);
528
529static u8 encode_bMaxPower(enum usb_device_speed speed,
530 struct usb_configuration *c)
531{
532 unsigned val;
533
534 if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
535 val = c->MaxPower;
536 else
537 val = CONFIG_USB_GADGET_VBUS_DRAW;
538 if (!val)
539 return 0;
540 if (speed < USB_SPEED_SUPER)
541 return min(val, 500U) / 2;
542 else
543 /*
544 * USB 3.x supports up to 900mA, but since 900 isn't divisible
545 * by 8 the integral division will effectively cap to 896mA.
546 */
547 return min(val, 900U) / 8;
548}
549
550void check_remote_wakeup_config(struct usb_gadget *g,
551 struct usb_configuration *c)
552{
553 if (USB_CONFIG_ATT_WAKEUP & c->bmAttributes) {
554 /* Reset the rw bit if gadget is not capable of it */
555 if (!g->wakeup_capable && g->ops->set_remote_wakeup) {
556 WARN(c->cdev, "Clearing wakeup bit for config c.%d\n",
557 c->bConfigurationValue);
558 c->bmAttributes &= ~USB_CONFIG_ATT_WAKEUP;
559 }
560 }
561}
562
563static int config_buf(struct usb_configuration *config,
564 enum usb_device_speed speed, void *buf, u8 type)
565{
566 struct usb_config_descriptor *c = buf;
567 void *next = buf + USB_DT_CONFIG_SIZE;
568 int len;
569 struct usb_function *f;
570 int status;
571
572 len = USB_COMP_EP0_BUFSIZ - USB_DT_CONFIG_SIZE;
573 /* write the config descriptor */
574 c = buf;
575 c->bLength = USB_DT_CONFIG_SIZE;
576 c->bDescriptorType = type;
577 /* wTotalLength is written later */
578 c->bNumInterfaces = config->next_interface_id;
579 c->bConfigurationValue = config->bConfigurationValue;
580 c->iConfiguration = config->iConfiguration;
581 c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
582 c->bMaxPower = encode_bMaxPower(speed, config);
583
584 /* There may be e.g. OTG descriptors */
585 if (config->descriptors) {
586 status = usb_descriptor_fillbuf(next, len,
587 config->descriptors);
588 if (status < 0)
589 return status;
590 len -= status;
591 next += status;
592 }
593
594 /* add each function's descriptors */
595 list_for_each_entry(f, &config->functions, list) {
596 struct usb_descriptor_header **descriptors;
597
598 descriptors = function_descriptors(f, speed);
599 if (!descriptors)
600 continue;
601 status = usb_descriptor_fillbuf(next, len,
602 (const struct usb_descriptor_header **) descriptors);
603 if (status < 0)
604 return status;
605 len -= status;
606 next += status;
607 }
608
609 len = next - buf;
610 c->wTotalLength = cpu_to_le16(len);
611 return len;
612}
613
614static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
615{
616 struct usb_gadget *gadget = cdev->gadget;
617 struct usb_configuration *c;
618 struct list_head *pos;
619 u8 type = w_value >> 8;
620 enum usb_device_speed speed = USB_SPEED_UNKNOWN;
621
622 if (gadget->speed >= USB_SPEED_SUPER)
623 speed = gadget->speed;
624 else if (gadget_is_dualspeed(gadget)) {
625 int hs = 0;
626 if (gadget->speed == USB_SPEED_HIGH)
627 hs = 1;
628 if (type == USB_DT_OTHER_SPEED_CONFIG)
629 hs = !hs;
630 if (hs)
631 speed = USB_SPEED_HIGH;
632
633 }
634
635 /* This is a lookup by config *INDEX* */
636 w_value &= 0xff;
637
638 pos = &cdev->configs;
639 c = cdev->os_desc_config;
640 if (c)
641 goto check_config;
642
643 while ((pos = pos->next) != &cdev->configs) {
644 c = list_entry(pos, typeof(*c), list);
645
646 /* skip OS Descriptors config which is handled separately */
647 if (c == cdev->os_desc_config)
648 continue;
649
650check_config:
651 /* ignore configs that won't work at this speed */
652 switch (speed) {
653 case USB_SPEED_SUPER_PLUS:
654 if (!c->superspeed_plus)
655 continue;
656 break;
657 case USB_SPEED_SUPER:
658 if (!c->superspeed)
659 continue;
660 break;
661 case USB_SPEED_HIGH:
662 if (!c->highspeed)
663 continue;
664 break;
665 default:
666 if (!c->fullspeed)
667 continue;
668 }
669
670 if (w_value == 0)
671 return config_buf(c, speed, cdev->req->buf, type);
672 w_value--;
673 }
674 return -EINVAL;
675}
676
677static int count_configs(struct usb_composite_dev *cdev, unsigned type)
678{
679 struct usb_gadget *gadget = cdev->gadget;
680 struct usb_configuration *c;
681 unsigned count = 0;
682 int hs = 0;
683 int ss = 0;
684 int ssp = 0;
685
686 if (gadget_is_dualspeed(gadget)) {
687 if (gadget->speed == USB_SPEED_HIGH)
688 hs = 1;
689 if (gadget->speed == USB_SPEED_SUPER)
690 ss = 1;
691 if (gadget->speed == USB_SPEED_SUPER_PLUS)
692 ssp = 1;
693 if (type == USB_DT_DEVICE_QUALIFIER)
694 hs = !hs;
695 }
696 list_for_each_entry(c, &cdev->configs, list) {
697 /* ignore configs that won't work at this speed */
698 if (ssp) {
699 if (!c->superspeed_plus)
700 continue;
701 } else if (ss) {
702 if (!c->superspeed)
703 continue;
704 } else if (hs) {
705 if (!c->highspeed)
706 continue;
707 } else {
708 if (!c->fullspeed)
709 continue;
710 }
711 count++;
712 }
713 return count;
714}
715
716/**
717 * bos_desc() - prepares the BOS descriptor.
718 * @cdev: pointer to usb_composite device to generate the bos
719 * descriptor for
720 *
721 * This function generates the BOS (Binary Device Object)
722 * descriptor and its device capabilities descriptors. The BOS
723 * descriptor should be supported by a SuperSpeed device.
724 */
725static int bos_desc(struct usb_composite_dev *cdev)
726{
727 struct usb_ext_cap_descriptor *usb_ext;
728 struct usb_dcd_config_params dcd_config_params;
729 struct usb_bos_descriptor *bos = cdev->req->buf;
730 unsigned int besl = 0;
731
732 bos->bLength = USB_DT_BOS_SIZE;
733 bos->bDescriptorType = USB_DT_BOS;
734
735 bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
736 bos->bNumDeviceCaps = 0;
737
738 /* Get Controller configuration */
739 if (cdev->gadget->ops->get_config_params) {
740 cdev->gadget->ops->get_config_params(cdev->gadget,
741 &dcd_config_params);
742 } else {
743 dcd_config_params.besl_baseline =
744 USB_DEFAULT_BESL_UNSPECIFIED;
745 dcd_config_params.besl_deep =
746 USB_DEFAULT_BESL_UNSPECIFIED;
747 dcd_config_params.bU1devExitLat =
748 USB_DEFAULT_U1_DEV_EXIT_LAT;
749 dcd_config_params.bU2DevExitLat =
750 cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
751 }
752
753 if (dcd_config_params.besl_baseline != USB_DEFAULT_BESL_UNSPECIFIED)
754 besl = USB_BESL_BASELINE_VALID |
755 USB_SET_BESL_BASELINE(dcd_config_params.besl_baseline);
756
757 if (dcd_config_params.besl_deep != USB_DEFAULT_BESL_UNSPECIFIED)
758 besl |= USB_BESL_DEEP_VALID |
759 USB_SET_BESL_DEEP(dcd_config_params.besl_deep);
760
761 /*
762 * A SuperSpeed device shall include the USB2.0 extension descriptor
763 * and shall support LPM when operating in USB2.0 HS mode.
764 */
765 if (cdev->gadget->lpm_capable) {
766 usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
767 bos->bNumDeviceCaps++;
768 le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
769 usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
770 usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
771 usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
772 usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT |
773 USB_BESL_SUPPORT | besl);
774 }
775
776 /*
777 * The Superspeed USB Capability descriptor shall be implemented by all
778 * SuperSpeed devices.
779 */
780 if (gadget_is_superspeed(cdev->gadget)) {
781 struct usb_ss_cap_descriptor *ss_cap;
782
783 ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
784 bos->bNumDeviceCaps++;
785 le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
786 ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
787 ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
788 ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
789 ss_cap->bmAttributes = 0; /* LTM is not supported yet */
790 ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION |
791 USB_FULL_SPEED_OPERATION |
792 USB_HIGH_SPEED_OPERATION |
793 USB_5GBPS_OPERATION);
794 ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
795 ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
796 ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
797 }
798
799 /* The SuperSpeedPlus USB Device Capability descriptor */
800 if (gadget_is_superspeed_plus(cdev->gadget)) {
801 struct usb_ssp_cap_descriptor *ssp_cap;
802 u8 ssac = 1;
803 u8 ssic;
804 int i;
805
806 if (cdev->gadget->max_ssp_rate == USB_SSP_GEN_2x2)
807 ssac = 3;
808
809 /*
810 * Paired RX and TX sublink speed attributes share
811 * the same SSID.
812 */
813 ssic = (ssac + 1) / 2 - 1;
814
815 ssp_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
816 bos->bNumDeviceCaps++;
817
818 le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SSP_CAP_SIZE(ssac));
819 ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(ssac);
820 ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
821 ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE;
822 ssp_cap->bReserved = 0;
823 ssp_cap->wReserved = 0;
824
825 ssp_cap->bmAttributes =
826 cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, ssac) |
827 FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, ssic));
828
829 ssp_cap->wFunctionalitySupport =
830 cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, 0) |
831 FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) |
832 FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1));
833
834 /*
835 * Use 1 SSID if the gadget supports up to gen2x1 or not
836 * specified:
837 * - SSID 0 for symmetric RX/TX sublink speed of 10 Gbps.
838 *
839 * Use 1 SSID if the gadget supports up to gen1x2:
840 * - SSID 0 for symmetric RX/TX sublink speed of 5 Gbps.
841 *
842 * Use 2 SSIDs if the gadget supports up to gen2x2:
843 * - SSID 0 for symmetric RX/TX sublink speed of 5 Gbps.
844 * - SSID 1 for symmetric RX/TX sublink speed of 10 Gbps.
845 */
846 for (i = 0; i < ssac + 1; i++) {
847 u8 ssid;
848 u8 mantissa;
849 u8 type;
850
851 ssid = i >> 1;
852
853 if (cdev->gadget->max_ssp_rate == USB_SSP_GEN_2x1 ||
854 cdev->gadget->max_ssp_rate == USB_SSP_GEN_UNKNOWN)
855 mantissa = 10;
856 else
857 mantissa = 5 << ssid;
858
859 if (i % 2)
860 type = USB_SSP_SUBLINK_SPEED_ST_SYM_TX;
861 else
862 type = USB_SSP_SUBLINK_SPEED_ST_SYM_RX;
863
864 ssp_cap->bmSublinkSpeedAttr[i] =
865 cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, ssid) |
866 FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE,
867 USB_SSP_SUBLINK_SPEED_LSE_GBPS) |
868 FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, type) |
869 FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP,
870 USB_SSP_SUBLINK_SPEED_LP_SSP) |
871 FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, mantissa));
872 }
873 }
874
875 /* The WebUSB Platform Capability descriptor */
876 if (cdev->use_webusb) {
877 struct usb_plat_dev_cap_descriptor *webusb_cap;
878 struct usb_webusb_cap_data *webusb_cap_data;
879 guid_t webusb_uuid = WEBUSB_UUID;
880
881 webusb_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
882 webusb_cap_data = (struct usb_webusb_cap_data *) webusb_cap->CapabilityData;
883 bos->bNumDeviceCaps++;
884 le16_add_cpu(&bos->wTotalLength,
885 USB_DT_USB_PLAT_DEV_CAP_SIZE(USB_WEBUSB_CAP_DATA_SIZE));
886
887 webusb_cap->bLength = USB_DT_USB_PLAT_DEV_CAP_SIZE(USB_WEBUSB_CAP_DATA_SIZE);
888 webusb_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
889 webusb_cap->bDevCapabilityType = USB_PLAT_DEV_CAP_TYPE;
890 webusb_cap->bReserved = 0;
891 export_guid(webusb_cap->UUID, &webusb_uuid);
892
893 if (cdev->bcd_webusb_version != 0)
894 webusb_cap_data->bcdVersion = cpu_to_le16(cdev->bcd_webusb_version);
895 else
896 webusb_cap_data->bcdVersion = WEBUSB_VERSION_1_00;
897
898 webusb_cap_data->bVendorCode = cdev->b_webusb_vendor_code;
899
900 if (strnlen(cdev->landing_page, sizeof(cdev->landing_page)) > 0)
901 webusb_cap_data->iLandingPage = WEBUSB_LANDING_PAGE_PRESENT;
902 else
903 webusb_cap_data->iLandingPage = WEBUSB_LANDING_PAGE_NOT_PRESENT;
904 }
905
906 return le16_to_cpu(bos->wTotalLength);
907}
908
909static void device_qual(struct usb_composite_dev *cdev)
910{
911 struct usb_qualifier_descriptor *qual = cdev->req->buf;
912
913 qual->bLength = sizeof(*qual);
914 qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER;
915 /* POLICY: same bcdUSB and device type info at both speeds */
916 qual->bcdUSB = cdev->desc.bcdUSB;
917 qual->bDeviceClass = cdev->desc.bDeviceClass;
918 qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
919 qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
920 /* ASSUME same EP0 fifo size at both speeds */
921 qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket;
922 qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
923 qual->bRESERVED = 0;
924}
925
926/*-------------------------------------------------------------------------*/
927
928static void reset_config(struct usb_composite_dev *cdev)
929{
930 struct usb_function *f;
931
932 DBG(cdev, "reset config\n");
933
934 list_for_each_entry(f, &cdev->config->functions, list) {
935 if (f->disable)
936 f->disable(f);
937
938 /* Section 9.1.1.6, disable remote wakeup when device is reset */
939 f->func_wakeup_armed = false;
940
941 bitmap_zero(f->endpoints, 32);
942 }
943 cdev->config = NULL;
944 cdev->delayed_status = 0;
945}
946
947static int set_config(struct usb_composite_dev *cdev,
948 const struct usb_ctrlrequest *ctrl, unsigned number)
949{
950 struct usb_gadget *gadget = cdev->gadget;
951 struct usb_configuration *c = NULL, *iter;
952 int result = -EINVAL;
953 unsigned power = gadget_is_otg(gadget) ? 8 : 100;
954 int tmp;
955
956 if (number) {
957 list_for_each_entry(iter, &cdev->configs, list) {
958 if (iter->bConfigurationValue != number)
959 continue;
960 /*
961 * We disable the FDs of the previous
962 * configuration only if the new configuration
963 * is a valid one
964 */
965 if (cdev->config)
966 reset_config(cdev);
967 c = iter;
968 result = 0;
969 break;
970 }
971 if (result < 0)
972 goto done;
973 } else { /* Zero configuration value - need to reset the config */
974 if (cdev->config)
975 reset_config(cdev);
976 result = 0;
977 }
978
979 DBG(cdev, "%s config #%d: %s\n",
980 usb_speed_string(gadget->speed),
981 number, c ? c->label : "unconfigured");
982
983 if (!c)
984 goto done;
985
986 usb_gadget_set_state(gadget, USB_STATE_CONFIGURED);
987 cdev->config = c;
988
989 /* Initialize all interfaces by setting them to altsetting zero. */
990 for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
991 struct usb_function *f = c->interface[tmp];
992 struct usb_descriptor_header **descriptors;
993
994 if (!f)
995 break;
996
997 /*
998 * Record which endpoints are used by the function. This is used
999 * to dispatch control requests targeted at that endpoint to the
1000 * function's setup callback instead of the current
1001 * configuration's setup callback.
1002 */
1003 descriptors = function_descriptors(f, gadget->speed);
1004
1005 for (; *descriptors; ++descriptors) {
1006 struct usb_endpoint_descriptor *ep;
1007 int addr;
1008
1009 if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
1010 continue;
1011
1012 ep = (struct usb_endpoint_descriptor *)*descriptors;
1013 addr = ((ep->bEndpointAddress & 0x80) >> 3)
1014 | (ep->bEndpointAddress & 0x0f);
1015 set_bit(addr, f->endpoints);
1016 }
1017
1018 result = f->set_alt(f, tmp, 0);
1019 if (result < 0) {
1020 DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n",
1021 tmp, f->name, f, result);
1022
1023 reset_config(cdev);
1024 goto done;
1025 }
1026
1027 if (result == USB_GADGET_DELAYED_STATUS) {
1028 DBG(cdev,
1029 "%s: interface %d (%s) requested delayed status\n",
1030 __func__, tmp, f->name);
1031 cdev->delayed_status++;
1032 DBG(cdev, "delayed_status count %d\n",
1033 cdev->delayed_status);
1034 }
1035 }
1036
1037 /* when we return, be sure our power usage is valid */
1038 if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
1039 power = c->MaxPower;
1040 else
1041 power = CONFIG_USB_GADGET_VBUS_DRAW;
1042
1043 if (gadget->speed < USB_SPEED_SUPER)
1044 power = min(power, 500U);
1045 else
1046 power = min(power, 900U);
1047
1048 if (USB_CONFIG_ATT_WAKEUP & c->bmAttributes)
1049 usb_gadget_set_remote_wakeup(gadget, 1);
1050 else
1051 usb_gadget_set_remote_wakeup(gadget, 0);
1052done:
1053 if (power <= USB_SELF_POWER_VBUS_MAX_DRAW)
1054 usb_gadget_set_selfpowered(gadget);
1055 else
1056 usb_gadget_clear_selfpowered(gadget);
1057
1058 usb_gadget_vbus_draw(gadget, power);
1059 if (result >= 0 && cdev->delayed_status)
1060 result = USB_GADGET_DELAYED_STATUS;
1061 return result;
1062}
1063
1064int usb_add_config_only(struct usb_composite_dev *cdev,
1065 struct usb_configuration *config)
1066{
1067 struct usb_configuration *c;
1068
1069 if (!config->bConfigurationValue)
1070 return -EINVAL;
1071
1072 /* Prevent duplicate configuration identifiers */
1073 list_for_each_entry(c, &cdev->configs, list) {
1074 if (c->bConfigurationValue == config->bConfigurationValue)
1075 return -EBUSY;
1076 }
1077
1078 config->cdev = cdev;
1079 list_add_tail(&config->list, &cdev->configs);
1080
1081 INIT_LIST_HEAD(&config->functions);
1082 config->next_interface_id = 0;
1083 memset(config->interface, 0, sizeof(config->interface));
1084
1085 return 0;
1086}
1087EXPORT_SYMBOL_GPL(usb_add_config_only);
1088
1089/**
1090 * usb_add_config() - add a configuration to a device.
1091 * @cdev: wraps the USB gadget
1092 * @config: the configuration, with bConfigurationValue assigned
1093 * @bind: the configuration's bind function
1094 * Context: single threaded during gadget setup
1095 *
1096 * One of the main tasks of a composite @bind() routine is to
1097 * add each of the configurations it supports, using this routine.
1098 *
1099 * This function returns the value of the configuration's @bind(), which
1100 * is zero for success else a negative errno value. Binding configurations
1101 * assigns global resources including string IDs, and per-configuration
1102 * resources such as interface IDs and endpoints.
1103 */
1104int usb_add_config(struct usb_composite_dev *cdev,
1105 struct usb_configuration *config,
1106 int (*bind)(struct usb_configuration *))
1107{
1108 int status = -EINVAL;
1109
1110 if (!bind)
1111 goto done;
1112
1113 DBG(cdev, "adding config #%u '%s'/%p\n",
1114 config->bConfigurationValue,
1115 config->label, config);
1116
1117 status = usb_add_config_only(cdev, config);
1118 if (status)
1119 goto done;
1120
1121 status = bind(config);
1122
1123 if (status == 0)
1124 status = usb_gadget_check_config(cdev->gadget);
1125
1126 if (status < 0) {
1127 while (!list_empty(&config->functions)) {
1128 struct usb_function *f;
1129
1130 f = list_first_entry(&config->functions,
1131 struct usb_function, list);
1132 list_del(&f->list);
1133 if (f->unbind) {
1134 DBG(cdev, "unbind function '%s'/%p\n",
1135 f->name, f);
1136 f->unbind(config, f);
1137 /* may free memory for "f" */
1138 }
1139 }
1140 list_del(&config->list);
1141 config->cdev = NULL;
1142 } else {
1143 unsigned i;
1144
1145 DBG(cdev, "cfg %d/%p speeds:%s%s%s%s\n",
1146 config->bConfigurationValue, config,
1147 config->superspeed_plus ? " superplus" : "",
1148 config->superspeed ? " super" : "",
1149 config->highspeed ? " high" : "",
1150 config->fullspeed
1151 ? (gadget_is_dualspeed(cdev->gadget)
1152 ? " full"
1153 : " full/low")
1154 : "");
1155
1156 for (i = 0; i < MAX_CONFIG_INTERFACES; i++) {
1157 struct usb_function *f = config->interface[i];
1158
1159 if (!f)
1160 continue;
1161 DBG(cdev, " interface %d = %s/%p\n",
1162 i, f->name, f);
1163 }
1164 }
1165
1166 /* set_alt(), or next bind(), sets up ep->claimed as needed */
1167 usb_ep_autoconfig_reset(cdev->gadget);
1168
1169done:
1170 if (status)
1171 DBG(cdev, "added config '%s'/%u --> %d\n", config->label,
1172 config->bConfigurationValue, status);
1173 return status;
1174}
1175EXPORT_SYMBOL_GPL(usb_add_config);
1176
1177static void remove_config(struct usb_composite_dev *cdev,
1178 struct usb_configuration *config)
1179{
1180 while (!list_empty(&config->functions)) {
1181 struct usb_function *f;
1182
1183 f = list_first_entry(&config->functions,
1184 struct usb_function, list);
1185
1186 usb_remove_function(config, f);
1187 }
1188 list_del(&config->list);
1189 if (config->unbind) {
1190 DBG(cdev, "unbind config '%s'/%p\n", config->label, config);
1191 config->unbind(config);
1192 /* may free memory for "c" */
1193 }
1194}
1195
1196/**
1197 * usb_remove_config() - remove a configuration from a device.
1198 * @cdev: wraps the USB gadget
1199 * @config: the configuration
1200 *
1201 * Drivers must call usb_gadget_disconnect before calling this function
1202 * to disconnect the device from the host and make sure the host will not
1203 * try to enumerate the device while we are changing the config list.
1204 */
1205void usb_remove_config(struct usb_composite_dev *cdev,
1206 struct usb_configuration *config)
1207{
1208 unsigned long flags;
1209
1210 spin_lock_irqsave(&cdev->lock, flags);
1211
1212 if (cdev->config == config)
1213 reset_config(cdev);
1214
1215 spin_unlock_irqrestore(&cdev->lock, flags);
1216
1217 remove_config(cdev, config);
1218}
1219
1220/*-------------------------------------------------------------------------*/
1221
1222/* We support strings in multiple languages ... string descriptor zero
1223 * says which languages are supported. The typical case will be that
1224 * only one language (probably English) is used, with i18n handled on
1225 * the host side.
1226 */
1227
1228static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
1229{
1230 const struct usb_gadget_strings *s;
1231 __le16 language;
1232 __le16 *tmp;
1233
1234 while (*sp) {
1235 s = *sp;
1236 language = cpu_to_le16(s->language);
1237 for (tmp = buf; *tmp && tmp < &buf[USB_MAX_STRING_LEN]; tmp++) {
1238 if (*tmp == language)
1239 goto repeat;
1240 }
1241 *tmp++ = language;
1242repeat:
1243 sp++;
1244 }
1245}
1246
1247static int lookup_string(
1248 struct usb_gadget_strings **sp,
1249 void *buf,
1250 u16 language,
1251 int id
1252)
1253{
1254 struct usb_gadget_strings *s;
1255 int value;
1256
1257 while (*sp) {
1258 s = *sp++;
1259 if (s->language != language)
1260 continue;
1261 value = usb_gadget_get_string(s, id, buf);
1262 if (value > 0)
1263 return value;
1264 }
1265 return -EINVAL;
1266}
1267
1268static int get_string(struct usb_composite_dev *cdev,
1269 void *buf, u16 language, int id)
1270{
1271 struct usb_composite_driver *composite = cdev->driver;
1272 struct usb_gadget_string_container *uc;
1273 struct usb_configuration *c;
1274 struct usb_function *f;
1275 int len;
1276
1277 /* Yes, not only is USB's i18n support probably more than most
1278 * folk will ever care about ... also, it's all supported here.
1279 * (Except for UTF8 support for Unicode's "Astral Planes".)
1280 */
1281
1282 /* 0 == report all available language codes */
1283 if (id == 0) {
1284 struct usb_string_descriptor *s = buf;
1285 struct usb_gadget_strings **sp;
1286
1287 memset(s, 0, 256);
1288 s->bDescriptorType = USB_DT_STRING;
1289
1290 sp = composite->strings;
1291 if (sp)
1292 collect_langs(sp, s->wData);
1293
1294 list_for_each_entry(c, &cdev->configs, list) {
1295 sp = c->strings;
1296 if (sp)
1297 collect_langs(sp, s->wData);
1298
1299 list_for_each_entry(f, &c->functions, list) {
1300 sp = f->strings;
1301 if (sp)
1302 collect_langs(sp, s->wData);
1303 }
1304 }
1305 list_for_each_entry(uc, &cdev->gstrings, list) {
1306 struct usb_gadget_strings **sp;
1307
1308 sp = get_containers_gs(uc);
1309 collect_langs(sp, s->wData);
1310 }
1311
1312 for (len = 0; len <= USB_MAX_STRING_LEN && s->wData[len]; len++)
1313 continue;
1314 if (!len)
1315 return -EINVAL;
1316
1317 s->bLength = 2 * (len + 1);
1318 return s->bLength;
1319 }
1320
1321 if (cdev->use_os_string && language == 0 && id == OS_STRING_IDX) {
1322 struct usb_os_string *b = buf;
1323 b->bLength = sizeof(*b);
1324 b->bDescriptorType = USB_DT_STRING;
1325 compiletime_assert(
1326 sizeof(b->qwSignature) == sizeof(cdev->qw_sign),
1327 "qwSignature size must be equal to qw_sign");
1328 memcpy(&b->qwSignature, cdev->qw_sign, sizeof(b->qwSignature));
1329 b->bMS_VendorCode = cdev->b_vendor_code;
1330 b->bPad = 0;
1331 return sizeof(*b);
1332 }
1333
1334 list_for_each_entry(uc, &cdev->gstrings, list) {
1335 struct usb_gadget_strings **sp;
1336
1337 sp = get_containers_gs(uc);
1338 len = lookup_string(sp, buf, language, id);
1339 if (len > 0)
1340 return len;
1341 }
1342
1343 /* String IDs are device-scoped, so we look up each string
1344 * table we're told about. These lookups are infrequent;
1345 * simpler-is-better here.
1346 */
1347 if (composite->strings) {
1348 len = lookup_string(composite->strings, buf, language, id);
1349 if (len > 0)
1350 return len;
1351 }
1352 list_for_each_entry(c, &cdev->configs, list) {
1353 if (c->strings) {
1354 len = lookup_string(c->strings, buf, language, id);
1355 if (len > 0)
1356 return len;
1357 }
1358 list_for_each_entry(f, &c->functions, list) {
1359 if (!f->strings)
1360 continue;
1361 len = lookup_string(f->strings, buf, language, id);
1362 if (len > 0)
1363 return len;
1364 }
1365 }
1366 return -EINVAL;
1367}
1368
1369/**
1370 * usb_string_id() - allocate an unused string ID
1371 * @cdev: the device whose string descriptor IDs are being allocated
1372 * Context: single threaded during gadget setup
1373 *
1374 * @usb_string_id() is called from bind() callbacks to allocate
1375 * string IDs. Drivers for functions, configurations, or gadgets will
1376 * then store that ID in the appropriate descriptors and string table.
1377 *
1378 * All string identifier should be allocated using this,
1379 * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
1380 * that for example different functions don't wrongly assign different
1381 * meanings to the same identifier.
1382 */
1383int usb_string_id(struct usb_composite_dev *cdev)
1384{
1385 if (cdev->next_string_id < 254) {
1386 /* string id 0 is reserved by USB spec for list of
1387 * supported languages */
1388 /* 255 reserved as well? -- mina86 */
1389 cdev->next_string_id++;
1390 return cdev->next_string_id;
1391 }
1392 return -ENODEV;
1393}
1394EXPORT_SYMBOL_GPL(usb_string_id);
1395
1396/**
1397 * usb_string_ids_tab() - allocate unused string IDs in batch
1398 * @cdev: the device whose string descriptor IDs are being allocated
1399 * @str: an array of usb_string objects to assign numbers to
1400 * Context: single threaded during gadget setup
1401 *
1402 * @usb_string_ids() is called from bind() callbacks to allocate
1403 * string IDs. Drivers for functions, configurations, or gadgets will
1404 * then copy IDs from the string table to the appropriate descriptors
1405 * and string table for other languages.
1406 *
1407 * All string identifier should be allocated using this,
1408 * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
1409 * example different functions don't wrongly assign different meanings
1410 * to the same identifier.
1411 */
1412int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
1413{
1414 int next = cdev->next_string_id;
1415
1416 for (; str->s; ++str) {
1417 if (unlikely(next >= 254))
1418 return -ENODEV;
1419 str->id = ++next;
1420 }
1421
1422 cdev->next_string_id = next;
1423
1424 return 0;
1425}
1426EXPORT_SYMBOL_GPL(usb_string_ids_tab);
1427
1428static struct usb_gadget_string_container *copy_gadget_strings(
1429 struct usb_gadget_strings **sp, unsigned n_gstrings,
1430 unsigned n_strings)
1431{
1432 struct usb_gadget_string_container *uc;
1433 struct usb_gadget_strings **gs_array;
1434 struct usb_gadget_strings *gs;
1435 struct usb_string *s;
1436 unsigned mem;
1437 unsigned n_gs;
1438 unsigned n_s;
1439 void *stash;
1440
1441 mem = sizeof(*uc);
1442 mem += sizeof(void *) * (n_gstrings + 1);
1443 mem += sizeof(struct usb_gadget_strings) * n_gstrings;
1444 mem += sizeof(struct usb_string) * (n_strings + 1) * (n_gstrings);
1445 uc = kmalloc(mem, GFP_KERNEL);
1446 if (!uc)
1447 return ERR_PTR(-ENOMEM);
1448 gs_array = get_containers_gs(uc);
1449 stash = uc->stash;
1450 stash += sizeof(void *) * (n_gstrings + 1);
1451 for (n_gs = 0; n_gs < n_gstrings; n_gs++) {
1452 struct usb_string *org_s;
1453
1454 gs_array[n_gs] = stash;
1455 gs = gs_array[n_gs];
1456 stash += sizeof(struct usb_gadget_strings);
1457 gs->language = sp[n_gs]->language;
1458 gs->strings = stash;
1459 org_s = sp[n_gs]->strings;
1460
1461 for (n_s = 0; n_s < n_strings; n_s++) {
1462 s = stash;
1463 stash += sizeof(struct usb_string);
1464 if (org_s->s)
1465 s->s = org_s->s;
1466 else
1467 s->s = "";
1468 org_s++;
1469 }
1470 s = stash;
1471 s->s = NULL;
1472 stash += sizeof(struct usb_string);
1473
1474 }
1475 gs_array[n_gs] = NULL;
1476 return uc;
1477}
1478
1479/**
1480 * usb_gstrings_attach() - attach gadget strings to a cdev and assign ids
1481 * @cdev: the device whose string descriptor IDs are being allocated
1482 * and attached.
1483 * @sp: an array of usb_gadget_strings to attach.
1484 * @n_strings: number of entries in each usb_strings array (sp[]->strings)
1485 *
1486 * This function will create a deep copy of usb_gadget_strings and usb_string
1487 * and attach it to the cdev. The actual string (usb_string.s) will not be
1488 * copied but only a referenced will be made. The struct usb_gadget_strings
1489 * array may contain multiple languages and should be NULL terminated.
1490 * The ->language pointer of each struct usb_gadget_strings has to contain the
1491 * same amount of entries.
1492 * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first
1493 * usb_string entry of es-ES contains the translation of the first usb_string
1494 * entry of en-US. Therefore both entries become the same id assign.
1495 */
1496struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
1497 struct usb_gadget_strings **sp, unsigned n_strings)
1498{
1499 struct usb_gadget_string_container *uc;
1500 struct usb_gadget_strings **n_gs;
1501 unsigned n_gstrings = 0;
1502 unsigned i;
1503 int ret;
1504
1505 for (i = 0; sp[i]; i++)
1506 n_gstrings++;
1507
1508 if (!n_gstrings)
1509 return ERR_PTR(-EINVAL);
1510
1511 uc = copy_gadget_strings(sp, n_gstrings, n_strings);
1512 if (IS_ERR(uc))
1513 return ERR_CAST(uc);
1514
1515 n_gs = get_containers_gs(uc);
1516 ret = usb_string_ids_tab(cdev, n_gs[0]->strings);
1517 if (ret)
1518 goto err;
1519
1520 for (i = 1; i < n_gstrings; i++) {
1521 struct usb_string *m_s;
1522 struct usb_string *s;
1523 unsigned n;
1524
1525 m_s = n_gs[0]->strings;
1526 s = n_gs[i]->strings;
1527 for (n = 0; n < n_strings; n++) {
1528 s->id = m_s->id;
1529 s++;
1530 m_s++;
1531 }
1532 }
1533 list_add_tail(&uc->list, &cdev->gstrings);
1534 return n_gs[0]->strings;
1535err:
1536 kfree(uc);
1537 return ERR_PTR(ret);
1538}
1539EXPORT_SYMBOL_GPL(usb_gstrings_attach);
1540
1541/**
1542 * usb_string_ids_n() - allocate unused string IDs in batch
1543 * @c: the device whose string descriptor IDs are being allocated
1544 * @n: number of string IDs to allocate
1545 * Context: single threaded during gadget setup
1546 *
1547 * Returns the first requested ID. This ID and next @n-1 IDs are now
1548 * valid IDs. At least provided that @n is non-zero because if it
1549 * is, returns last requested ID which is now very useful information.
1550 *
1551 * @usb_string_ids_n() is called from bind() callbacks to allocate
1552 * string IDs. Drivers for functions, configurations, or gadgets will
1553 * then store that ID in the appropriate descriptors and string table.
1554 *
1555 * All string identifier should be allocated using this,
1556 * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
1557 * example different functions don't wrongly assign different meanings
1558 * to the same identifier.
1559 */
1560int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
1561{
1562 unsigned next = c->next_string_id;
1563 if (unlikely(n > 254 || (unsigned)next + n > 254))
1564 return -ENODEV;
1565 c->next_string_id += n;
1566 return next + 1;
1567}
1568EXPORT_SYMBOL_GPL(usb_string_ids_n);
1569
1570/*-------------------------------------------------------------------------*/
1571
1572static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
1573{
1574 struct usb_composite_dev *cdev;
1575
1576 if (req->status || req->actual != req->length)
1577 DBG((struct usb_composite_dev *) ep->driver_data,
1578 "setup complete --> %d, %d/%d\n",
1579 req->status, req->actual, req->length);
1580
1581 /*
1582 * REVIST The same ep0 requests are shared with function drivers
1583 * so they don't have to maintain the same ->complete() stubs.
1584 *
1585 * Because of that, we need to check for the validity of ->context
1586 * here, even though we know we've set it to something useful.
1587 */
1588 if (!req->context)
1589 return;
1590
1591 cdev = req->context;
1592
1593 if (cdev->req == req)
1594 cdev->setup_pending = false;
1595 else if (cdev->os_desc_req == req)
1596 cdev->os_desc_pending = false;
1597 else
1598 WARN(1, "unknown request %p\n", req);
1599}
1600
1601static int composite_ep0_queue(struct usb_composite_dev *cdev,
1602 struct usb_request *req, gfp_t gfp_flags)
1603{
1604 int ret;
1605
1606 ret = usb_ep_queue(cdev->gadget->ep0, req, gfp_flags);
1607 if (ret == 0) {
1608 if (cdev->req == req)
1609 cdev->setup_pending = true;
1610 else if (cdev->os_desc_req == req)
1611 cdev->os_desc_pending = true;
1612 else
1613 WARN(1, "unknown request %p\n", req);
1614 }
1615
1616 return ret;
1617}
1618
1619static int count_ext_compat(struct usb_configuration *c)
1620{
1621 int i, res;
1622
1623 res = 0;
1624 for (i = 0; i < c->next_interface_id; ++i) {
1625 struct usb_function *f;
1626 int j;
1627
1628 f = c->interface[i];
1629 for (j = 0; j < f->os_desc_n; ++j) {
1630 struct usb_os_desc *d;
1631
1632 if (i != f->os_desc_table[j].if_id)
1633 continue;
1634 d = f->os_desc_table[j].os_desc;
1635 if (d && d->ext_compat_id)
1636 ++res;
1637 }
1638 }
1639 BUG_ON(res > 255);
1640 return res;
1641}
1642
1643static int fill_ext_compat(struct usb_configuration *c, u8 *buf)
1644{
1645 int i, count;
1646
1647 count = 16;
1648 buf += 16;
1649 for (i = 0; i < c->next_interface_id; ++i) {
1650 struct usb_function *f;
1651 int j;
1652
1653 f = c->interface[i];
1654 for (j = 0; j < f->os_desc_n; ++j) {
1655 struct usb_os_desc *d;
1656
1657 if (i != f->os_desc_table[j].if_id)
1658 continue;
1659 d = f->os_desc_table[j].os_desc;
1660 if (d && d->ext_compat_id) {
1661 *buf++ = i;
1662 *buf++ = 0x01;
1663 memcpy(buf, d->ext_compat_id, 16);
1664 buf += 22;
1665 } else {
1666 ++buf;
1667 *buf = 0x01;
1668 buf += 23;
1669 }
1670 count += 24;
1671 if (count + 24 >= USB_COMP_EP0_OS_DESC_BUFSIZ)
1672 return count;
1673 }
1674 }
1675
1676 return count;
1677}
1678
1679static int count_ext_prop(struct usb_configuration *c, int interface)
1680{
1681 struct usb_function *f;
1682 int j;
1683
1684 f = c->interface[interface];
1685 for (j = 0; j < f->os_desc_n; ++j) {
1686 struct usb_os_desc *d;
1687
1688 if (interface != f->os_desc_table[j].if_id)
1689 continue;
1690 d = f->os_desc_table[j].os_desc;
1691 if (d && d->ext_compat_id)
1692 return d->ext_prop_count;
1693 }
1694 return 0;
1695}
1696
1697static int len_ext_prop(struct usb_configuration *c, int interface)
1698{
1699 struct usb_function *f;
1700 struct usb_os_desc *d;
1701 int j, res;
1702
1703 res = 10; /* header length */
1704 f = c->interface[interface];
1705 for (j = 0; j < f->os_desc_n; ++j) {
1706 if (interface != f->os_desc_table[j].if_id)
1707 continue;
1708 d = f->os_desc_table[j].os_desc;
1709 if (d)
1710 return min(res + d->ext_prop_len, 4096);
1711 }
1712 return res;
1713}
1714
1715static int fill_ext_prop(struct usb_configuration *c, int interface, u8 *buf)
1716{
1717 struct usb_function *f;
1718 struct usb_os_desc *d;
1719 struct usb_os_desc_ext_prop *ext_prop;
1720 int j, count, n, ret;
1721
1722 f = c->interface[interface];
1723 count = 10; /* header length */
1724 buf += 10;
1725 for (j = 0; j < f->os_desc_n; ++j) {
1726 if (interface != f->os_desc_table[j].if_id)
1727 continue;
1728 d = f->os_desc_table[j].os_desc;
1729 if (d)
1730 list_for_each_entry(ext_prop, &d->ext_prop, entry) {
1731 n = ext_prop->data_len +
1732 ext_prop->name_len + 14;
1733 if (count + n >= USB_COMP_EP0_OS_DESC_BUFSIZ)
1734 return count;
1735 usb_ext_prop_put_size(buf, n);
1736 usb_ext_prop_put_type(buf, ext_prop->type);
1737 ret = usb_ext_prop_put_name(buf, ext_prop->name,
1738 ext_prop->name_len);
1739 if (ret < 0)
1740 return ret;
1741 switch (ext_prop->type) {
1742 case USB_EXT_PROP_UNICODE:
1743 case USB_EXT_PROP_UNICODE_ENV:
1744 case USB_EXT_PROP_UNICODE_LINK:
1745 usb_ext_prop_put_unicode(buf, ret,
1746 ext_prop->data,
1747 ext_prop->data_len);
1748 break;
1749 case USB_EXT_PROP_BINARY:
1750 usb_ext_prop_put_binary(buf, ret,
1751 ext_prop->data,
1752 ext_prop->data_len);
1753 break;
1754 case USB_EXT_PROP_LE32:
1755 /* not implemented */
1756 case USB_EXT_PROP_BE32:
1757 /* not implemented */
1758 default:
1759 return -EINVAL;
1760 }
1761 buf += n;
1762 count += n;
1763 }
1764 }
1765
1766 return count;
1767}
1768
1769/*
1770 * The setup() callback implements all the ep0 functionality that's
1771 * not handled lower down, in hardware or the hardware driver(like
1772 * device and endpoint feature flags, and their status). It's all
1773 * housekeeping for the gadget function we're implementing. Most of
1774 * the work is in config and function specific setup.
1775 */
1776int
1777composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
1778{
1779 struct usb_composite_dev *cdev = get_gadget_data(gadget);
1780 struct usb_request *req = cdev->req;
1781 int value = -EOPNOTSUPP;
1782 int status = 0;
1783 u16 w_index = le16_to_cpu(ctrl->wIndex);
1784 u8 intf = w_index & 0xFF;
1785 u16 w_value = le16_to_cpu(ctrl->wValue);
1786 u16 w_length = le16_to_cpu(ctrl->wLength);
1787 struct usb_function *f = NULL;
1788 struct usb_function *iter;
1789 u8 endp;
1790
1791 if (w_length > USB_COMP_EP0_BUFSIZ) {
1792 if (ctrl->bRequestType & USB_DIR_IN) {
1793 /* Cast away the const, we are going to overwrite on purpose. */
1794 __le16 *temp = (__le16 *)&ctrl->wLength;
1795
1796 *temp = cpu_to_le16(USB_COMP_EP0_BUFSIZ);
1797 w_length = USB_COMP_EP0_BUFSIZ;
1798 } else {
1799 goto done;
1800 }
1801 }
1802
1803 /* partial re-init of the response message; the function or the
1804 * gadget might need to intercept e.g. a control-OUT completion
1805 * when we delegate to it.
1806 */
1807 req->zero = 0;
1808 req->context = cdev;
1809 req->complete = composite_setup_complete;
1810 req->length = 0;
1811 gadget->ep0->driver_data = cdev;
1812
1813 /*
1814 * Don't let non-standard requests match any of the cases below
1815 * by accident.
1816 */
1817 if ((ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD)
1818 goto unknown;
1819
1820 switch (ctrl->bRequest) {
1821
1822 /* we handle all standard USB descriptors */
1823 case USB_REQ_GET_DESCRIPTOR:
1824 if (ctrl->bRequestType != USB_DIR_IN)
1825 goto unknown;
1826 switch (w_value >> 8) {
1827
1828 case USB_DT_DEVICE:
1829 cdev->desc.bNumConfigurations =
1830 count_configs(cdev, USB_DT_DEVICE);
1831 cdev->desc.bMaxPacketSize0 =
1832 cdev->gadget->ep0->maxpacket;
1833 if (gadget_is_superspeed(gadget)) {
1834 if (gadget->speed >= USB_SPEED_SUPER) {
1835 cdev->desc.bcdUSB = cpu_to_le16(0x0320);
1836 cdev->desc.bMaxPacketSize0 = 9;
1837 } else {
1838 cdev->desc.bcdUSB = cpu_to_le16(0x0210);
1839 }
1840 } else {
1841 if (gadget->lpm_capable || cdev->use_webusb)
1842 cdev->desc.bcdUSB = cpu_to_le16(0x0201);
1843 else
1844 cdev->desc.bcdUSB = cpu_to_le16(0x0200);
1845 }
1846
1847 value = min(w_length, (u16) sizeof cdev->desc);
1848 memcpy(req->buf, &cdev->desc, value);
1849 break;
1850 case USB_DT_DEVICE_QUALIFIER:
1851 if (!gadget_is_dualspeed(gadget) ||
1852 gadget->speed >= USB_SPEED_SUPER)
1853 break;
1854 device_qual(cdev);
1855 value = min_t(int, w_length,
1856 sizeof(struct usb_qualifier_descriptor));
1857 break;
1858 case USB_DT_OTHER_SPEED_CONFIG:
1859 if (!gadget_is_dualspeed(gadget) ||
1860 gadget->speed >= USB_SPEED_SUPER)
1861 break;
1862 fallthrough;
1863 case USB_DT_CONFIG:
1864 value = config_desc(cdev, w_value);
1865 if (value >= 0)
1866 value = min(w_length, (u16) value);
1867 break;
1868 case USB_DT_STRING:
1869 value = get_string(cdev, req->buf,
1870 w_index, w_value & 0xff);
1871 if (value >= 0)
1872 value = min(w_length, (u16) value);
1873 break;
1874 case USB_DT_BOS:
1875 if (gadget_is_superspeed(gadget) ||
1876 gadget->lpm_capable || cdev->use_webusb) {
1877 value = bos_desc(cdev);
1878 value = min(w_length, (u16) value);
1879 }
1880 break;
1881 case USB_DT_OTG:
1882 if (gadget_is_otg(gadget)) {
1883 struct usb_configuration *config;
1884 int otg_desc_len = 0;
1885
1886 if (cdev->config)
1887 config = cdev->config;
1888 else
1889 config = list_first_entry(
1890 &cdev->configs,
1891 struct usb_configuration, list);
1892 if (!config)
1893 goto done;
1894
1895 if (gadget->otg_caps &&
1896 (gadget->otg_caps->otg_rev >= 0x0200))
1897 otg_desc_len += sizeof(
1898 struct usb_otg20_descriptor);
1899 else
1900 otg_desc_len += sizeof(
1901 struct usb_otg_descriptor);
1902
1903 value = min_t(int, w_length, otg_desc_len);
1904 memcpy(req->buf, config->descriptors[0], value);
1905 }
1906 break;
1907 }
1908 break;
1909
1910 /* any number of configs can work */
1911 case USB_REQ_SET_CONFIGURATION:
1912 if (ctrl->bRequestType != 0)
1913 goto unknown;
1914 if (gadget_is_otg(gadget)) {
1915 if (gadget->a_hnp_support)
1916 DBG(cdev, "HNP available\n");
1917 else if (gadget->a_alt_hnp_support)
1918 DBG(cdev, "HNP on another port\n");
1919 else
1920 VDBG(cdev, "HNP inactive\n");
1921 }
1922 spin_lock(&cdev->lock);
1923 value = set_config(cdev, ctrl, w_value);
1924 spin_unlock(&cdev->lock);
1925 break;
1926 case USB_REQ_GET_CONFIGURATION:
1927 if (ctrl->bRequestType != USB_DIR_IN)
1928 goto unknown;
1929 if (cdev->config)
1930 *(u8 *)req->buf = cdev->config->bConfigurationValue;
1931 else
1932 *(u8 *)req->buf = 0;
1933 value = min(w_length, (u16) 1);
1934 break;
1935
1936 /* function drivers must handle get/set altsetting */
1937 case USB_REQ_SET_INTERFACE:
1938 if (ctrl->bRequestType != USB_RECIP_INTERFACE)
1939 goto unknown;
1940 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
1941 break;
1942 f = cdev->config->interface[intf];
1943 if (!f)
1944 break;
1945
1946 /*
1947 * If there's no get_alt() method, we know only altsetting zero
1948 * works. There is no need to check if set_alt() is not NULL
1949 * as we check this in usb_add_function().
1950 */
1951 if (w_value && !f->get_alt)
1952 break;
1953
1954 spin_lock(&cdev->lock);
1955 value = f->set_alt(f, w_index, w_value);
1956 if (value == USB_GADGET_DELAYED_STATUS) {
1957 DBG(cdev,
1958 "%s: interface %d (%s) requested delayed status\n",
1959 __func__, intf, f->name);
1960 cdev->delayed_status++;
1961 DBG(cdev, "delayed_status count %d\n",
1962 cdev->delayed_status);
1963 }
1964 spin_unlock(&cdev->lock);
1965 break;
1966 case USB_REQ_GET_INTERFACE:
1967 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
1968 goto unknown;
1969 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
1970 break;
1971 f = cdev->config->interface[intf];
1972 if (!f)
1973 break;
1974 /* lots of interfaces only need altsetting zero... */
1975 value = f->get_alt ? f->get_alt(f, w_index) : 0;
1976 if (value < 0)
1977 break;
1978 *((u8 *)req->buf) = value;
1979 value = min(w_length, (u16) 1);
1980 break;
1981 case USB_REQ_GET_STATUS:
1982 if (gadget_is_otg(gadget) && gadget->hnp_polling_support &&
1983 (w_index == OTG_STS_SELECTOR)) {
1984 if (ctrl->bRequestType != (USB_DIR_IN |
1985 USB_RECIP_DEVICE))
1986 goto unknown;
1987 *((u8 *)req->buf) = gadget->host_request_flag;
1988 value = 1;
1989 break;
1990 }
1991
1992 /*
1993 * USB 3.0 additions:
1994 * Function driver should handle get_status request. If such cb
1995 * wasn't supplied we respond with default value = 0
1996 * Note: function driver should supply such cb only for the
1997 * first interface of the function
1998 */
1999 if (!gadget_is_superspeed(gadget))
2000 goto unknown;
2001 if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE))
2002 goto unknown;
2003 value = 2; /* This is the length of the get_status reply */
2004 put_unaligned_le16(0, req->buf);
2005 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
2006 break;
2007 f = cdev->config->interface[intf];
2008 if (!f)
2009 break;
2010
2011 if (f->get_status) {
2012 status = f->get_status(f);
2013 if (status < 0)
2014 break;
2015 } else {
2016 /* Set D0 and D1 bits based on func wakeup capability */
2017 if (f->config->bmAttributes & USB_CONFIG_ATT_WAKEUP) {
2018 status |= USB_INTRF_STAT_FUNC_RW_CAP;
2019 if (f->func_wakeup_armed)
2020 status |= USB_INTRF_STAT_FUNC_RW;
2021 }
2022 }
2023
2024 put_unaligned_le16(status & 0x0000ffff, req->buf);
2025 break;
2026 /*
2027 * Function drivers should handle SetFeature/ClearFeature
2028 * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied
2029 * only for the first interface of the function
2030 */
2031 case USB_REQ_CLEAR_FEATURE:
2032 case USB_REQ_SET_FEATURE:
2033 if (!gadget_is_superspeed(gadget))
2034 goto unknown;
2035 if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE))
2036 goto unknown;
2037 switch (w_value) {
2038 case USB_INTRF_FUNC_SUSPEND:
2039 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
2040 break;
2041 f = cdev->config->interface[intf];
2042 if (!f)
2043 break;
2044 value = 0;
2045 if (f->func_suspend) {
2046 value = f->func_suspend(f, w_index >> 8);
2047 /* SetFeature(FUNCTION_SUSPEND) */
2048 } else if (ctrl->bRequest == USB_REQ_SET_FEATURE) {
2049 if (!(f->config->bmAttributes &
2050 USB_CONFIG_ATT_WAKEUP) &&
2051 (w_index & USB_INTRF_FUNC_SUSPEND_RW))
2052 break;
2053
2054 f->func_wakeup_armed = !!(w_index &
2055 USB_INTRF_FUNC_SUSPEND_RW);
2056
2057 if (w_index & USB_INTRF_FUNC_SUSPEND_LP) {
2058 if (f->suspend && !f->func_suspended) {
2059 f->suspend(f);
2060 f->func_suspended = true;
2061 }
2062 /*
2063 * Handle cases where host sends function resume
2064 * through SetFeature(FUNCTION_SUSPEND) but low power
2065 * bit reset
2066 */
2067 } else {
2068 if (f->resume && f->func_suspended) {
2069 f->resume(f);
2070 f->func_suspended = false;
2071 }
2072 }
2073 /* ClearFeature(FUNCTION_SUSPEND) */
2074 } else if (ctrl->bRequest == USB_REQ_CLEAR_FEATURE) {
2075 f->func_wakeup_armed = false;
2076
2077 if (f->resume && f->func_suspended) {
2078 f->resume(f);
2079 f->func_suspended = false;
2080 }
2081 }
2082
2083 if (value < 0) {
2084 ERROR(cdev,
2085 "func_suspend() returned error %d\n",
2086 value);
2087 value = 0;
2088 }
2089 break;
2090 }
2091 break;
2092 default:
2093unknown:
2094 /*
2095 * OS descriptors handling
2096 */
2097 if (cdev->use_os_string && cdev->os_desc_config &&
2098 (ctrl->bRequestType & USB_TYPE_VENDOR) &&
2099 ctrl->bRequest == cdev->b_vendor_code) {
2100 struct usb_configuration *os_desc_cfg;
2101 u8 *buf;
2102 int interface;
2103 int count = 0;
2104
2105 req = cdev->os_desc_req;
2106 req->context = cdev;
2107 req->complete = composite_setup_complete;
2108 buf = req->buf;
2109 os_desc_cfg = cdev->os_desc_config;
2110 w_length = min_t(u16, w_length, USB_COMP_EP0_OS_DESC_BUFSIZ);
2111 memset(buf, 0, w_length);
2112 buf[5] = 0x01;
2113 switch (ctrl->bRequestType & USB_RECIP_MASK) {
2114 case USB_RECIP_DEVICE:
2115 if (w_index != 0x4 || (w_value >> 8))
2116 break;
2117 buf[6] = w_index;
2118 /* Number of ext compat interfaces */
2119 count = count_ext_compat(os_desc_cfg);
2120 buf[8] = count;
2121 count *= 24; /* 24 B/ext compat desc */
2122 count += 16; /* header */
2123 put_unaligned_le32(count, buf);
2124 value = w_length;
2125 if (w_length > 0x10) {
2126 value = fill_ext_compat(os_desc_cfg, buf);
2127 value = min_t(u16, w_length, value);
2128 }
2129 break;
2130 case USB_RECIP_INTERFACE:
2131 if (w_index != 0x5 || (w_value >> 8))
2132 break;
2133 interface = w_value & 0xFF;
2134 if (interface >= MAX_CONFIG_INTERFACES ||
2135 !os_desc_cfg->interface[interface])
2136 break;
2137 buf[6] = w_index;
2138 count = count_ext_prop(os_desc_cfg,
2139 interface);
2140 put_unaligned_le16(count, buf + 8);
2141 count = len_ext_prop(os_desc_cfg,
2142 interface);
2143 put_unaligned_le32(count, buf);
2144 value = w_length;
2145 if (w_length > 0x0A) {
2146 value = fill_ext_prop(os_desc_cfg,
2147 interface, buf);
2148 if (value >= 0)
2149 value = min_t(u16, w_length, value);
2150 }
2151 break;
2152 }
2153
2154 goto check_value;
2155 }
2156
2157 /*
2158 * WebUSB URL descriptor handling, following:
2159 * https://wicg.github.io/webusb/#device-requests
2160 */
2161 if (cdev->use_webusb &&
2162 ctrl->bRequestType == (USB_DIR_IN | USB_TYPE_VENDOR) &&
2163 w_index == WEBUSB_GET_URL &&
2164 w_value == WEBUSB_LANDING_PAGE_PRESENT &&
2165 ctrl->bRequest == cdev->b_webusb_vendor_code) {
2166 unsigned int landing_page_length;
2167 unsigned int landing_page_offset;
2168 struct webusb_url_descriptor *url_descriptor =
2169 (struct webusb_url_descriptor *)cdev->req->buf;
2170
2171 url_descriptor->bDescriptorType = WEBUSB_URL_DESCRIPTOR_TYPE;
2172
2173 if (strncasecmp(cdev->landing_page, "https://", 8) == 0) {
2174 landing_page_offset = 8;
2175 url_descriptor->bScheme = WEBUSB_URL_SCHEME_HTTPS;
2176 } else if (strncasecmp(cdev->landing_page, "http://", 7) == 0) {
2177 landing_page_offset = 7;
2178 url_descriptor->bScheme = WEBUSB_URL_SCHEME_HTTP;
2179 } else {
2180 landing_page_offset = 0;
2181 url_descriptor->bScheme = WEBUSB_URL_SCHEME_NONE;
2182 }
2183
2184 landing_page_length = strnlen(cdev->landing_page,
2185 sizeof(url_descriptor->URL)
2186 - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset);
2187
2188 if (w_length < WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_length)
2189 landing_page_length = w_length
2190 - WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
2191
2192 memcpy(url_descriptor->URL,
2193 cdev->landing_page + landing_page_offset,
2194 landing_page_length - landing_page_offset);
2195 url_descriptor->bLength = landing_page_length
2196 - landing_page_offset + WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH;
2197
2198 value = url_descriptor->bLength;
2199
2200 goto check_value;
2201 }
2202
2203 VDBG(cdev,
2204 "non-core control req%02x.%02x v%04x i%04x l%d\n",
2205 ctrl->bRequestType, ctrl->bRequest,
2206 w_value, w_index, w_length);
2207
2208 /* functions always handle their interfaces and endpoints...
2209 * punt other recipients (other, WUSB, ...) to the current
2210 * configuration code.
2211 */
2212 if (cdev->config) {
2213 list_for_each_entry(f, &cdev->config->functions, list)
2214 if (f->req_match &&
2215 f->req_match(f, ctrl, false))
2216 goto try_fun_setup;
2217 } else {
2218 struct usb_configuration *c;
2219 list_for_each_entry(c, &cdev->configs, list)
2220 list_for_each_entry(f, &c->functions, list)
2221 if (f->req_match &&
2222 f->req_match(f, ctrl, true))
2223 goto try_fun_setup;
2224 }
2225 f = NULL;
2226
2227 switch (ctrl->bRequestType & USB_RECIP_MASK) {
2228 case USB_RECIP_INTERFACE:
2229 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
2230 break;
2231 f = cdev->config->interface[intf];
2232 break;
2233
2234 case USB_RECIP_ENDPOINT:
2235 if (!cdev->config)
2236 break;
2237 endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
2238 list_for_each_entry(iter, &cdev->config->functions, list) {
2239 if (test_bit(endp, iter->endpoints)) {
2240 f = iter;
2241 break;
2242 }
2243 }
2244 break;
2245 }
2246try_fun_setup:
2247 if (f && f->setup)
2248 value = f->setup(f, ctrl);
2249 else {
2250 struct usb_configuration *c;
2251
2252 c = cdev->config;
2253 if (!c)
2254 goto done;
2255
2256 /* try current config's setup */
2257 if (c->setup) {
2258 value = c->setup(c, ctrl);
2259 goto done;
2260 }
2261
2262 /* try the only function in the current config */
2263 if (!list_is_singular(&c->functions))
2264 goto done;
2265 f = list_first_entry(&c->functions, struct usb_function,
2266 list);
2267 if (f->setup)
2268 value = f->setup(f, ctrl);
2269 }
2270
2271 goto done;
2272 }
2273
2274check_value:
2275 /* respond with data transfer before status phase? */
2276 if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) {
2277 req->length = value;
2278 req->context = cdev;
2279 req->zero = value < w_length;
2280 value = composite_ep0_queue(cdev, req, GFP_ATOMIC);
2281 if (value < 0) {
2282 DBG(cdev, "ep_queue --> %d\n", value);
2283 req->status = 0;
2284 composite_setup_complete(gadget->ep0, req);
2285 }
2286 } else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) {
2287 WARN(cdev,
2288 "%s: Delayed status not supported for w_length != 0",
2289 __func__);
2290 }
2291
2292done:
2293 /* device either stalls (value < 0) or reports success */
2294 return value;
2295}
2296
2297static void __composite_disconnect(struct usb_gadget *gadget)
2298{
2299 struct usb_composite_dev *cdev = get_gadget_data(gadget);
2300 unsigned long flags;
2301
2302 /* REVISIT: should we have config and device level
2303 * disconnect callbacks?
2304 */
2305 spin_lock_irqsave(&cdev->lock, flags);
2306 cdev->suspended = 0;
2307 if (cdev->config)
2308 reset_config(cdev);
2309 if (cdev->driver->disconnect)
2310 cdev->driver->disconnect(cdev);
2311 spin_unlock_irqrestore(&cdev->lock, flags);
2312}
2313
2314void composite_disconnect(struct usb_gadget *gadget)
2315{
2316 usb_gadget_vbus_draw(gadget, 0);
2317 __composite_disconnect(gadget);
2318}
2319
2320void composite_reset(struct usb_gadget *gadget)
2321{
2322 /*
2323 * Section 1.4.13 Standard Downstream Port of the USB battery charging
2324 * specification v1.2 states that a device connected on a SDP shall only
2325 * draw at max 100mA while in a connected, but unconfigured state.
2326 */
2327 usb_gadget_vbus_draw(gadget, 100);
2328 __composite_disconnect(gadget);
2329}
2330
2331/*-------------------------------------------------------------------------*/
2332
2333static ssize_t suspended_show(struct device *dev, struct device_attribute *attr,
2334 char *buf)
2335{
2336 struct usb_gadget *gadget = dev_to_usb_gadget(dev);
2337 struct usb_composite_dev *cdev = get_gadget_data(gadget);
2338
2339 return sprintf(buf, "%d\n", cdev->suspended);
2340}
2341static DEVICE_ATTR_RO(suspended);
2342
2343static void __composite_unbind(struct usb_gadget *gadget, bool unbind_driver)
2344{
2345 struct usb_composite_dev *cdev = get_gadget_data(gadget);
2346 struct usb_gadget_strings *gstr = cdev->driver->strings[0];
2347 struct usb_string *dev_str = gstr->strings;
2348
2349 /* composite_disconnect() must already have been called
2350 * by the underlying peripheral controller driver!
2351 * so there's no i/o concurrency that could affect the
2352 * state protected by cdev->lock.
2353 */
2354 WARN_ON(cdev->config);
2355
2356 while (!list_empty(&cdev->configs)) {
2357 struct usb_configuration *c;
2358 c = list_first_entry(&cdev->configs,
2359 struct usb_configuration, list);
2360 remove_config(cdev, c);
2361 }
2362 if (cdev->driver->unbind && unbind_driver)
2363 cdev->driver->unbind(cdev);
2364
2365 composite_dev_cleanup(cdev);
2366
2367 if (dev_str[USB_GADGET_MANUFACTURER_IDX].s == cdev->def_manufacturer)
2368 dev_str[USB_GADGET_MANUFACTURER_IDX].s = "";
2369
2370 kfree(cdev->def_manufacturer);
2371 kfree(cdev);
2372 set_gadget_data(gadget, NULL);
2373}
2374
2375static void composite_unbind(struct usb_gadget *gadget)
2376{
2377 __composite_unbind(gadget, true);
2378}
2379
2380static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
2381 const struct usb_device_descriptor *old)
2382{
2383 __le16 idVendor;
2384 __le16 idProduct;
2385 __le16 bcdDevice;
2386 u8 iSerialNumber;
2387 u8 iManufacturer;
2388 u8 iProduct;
2389
2390 /*
2391 * these variables may have been set in
2392 * usb_composite_overwrite_options()
2393 */
2394 idVendor = new->idVendor;
2395 idProduct = new->idProduct;
2396 bcdDevice = new->bcdDevice;
2397 iSerialNumber = new->iSerialNumber;
2398 iManufacturer = new->iManufacturer;
2399 iProduct = new->iProduct;
2400
2401 *new = *old;
2402 if (idVendor)
2403 new->idVendor = idVendor;
2404 if (idProduct)
2405 new->idProduct = idProduct;
2406 if (bcdDevice)
2407 new->bcdDevice = bcdDevice;
2408 else
2409 new->bcdDevice = cpu_to_le16(get_default_bcdDevice());
2410 if (iSerialNumber)
2411 new->iSerialNumber = iSerialNumber;
2412 if (iManufacturer)
2413 new->iManufacturer = iManufacturer;
2414 if (iProduct)
2415 new->iProduct = iProduct;
2416}
2417
2418int composite_dev_prepare(struct usb_composite_driver *composite,
2419 struct usb_composite_dev *cdev)
2420{
2421 struct usb_gadget *gadget = cdev->gadget;
2422 int ret = -ENOMEM;
2423
2424 /* preallocate control response and buffer */
2425 cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
2426 if (!cdev->req)
2427 return -ENOMEM;
2428
2429 cdev->req->buf = kzalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL);
2430 if (!cdev->req->buf)
2431 goto fail;
2432
2433 ret = device_create_file(&gadget->dev, &dev_attr_suspended);
2434 if (ret)
2435 goto fail_dev;
2436
2437 cdev->req->complete = composite_setup_complete;
2438 cdev->req->context = cdev;
2439 gadget->ep0->driver_data = cdev;
2440
2441 cdev->driver = composite;
2442
2443 /*
2444 * As per USB compliance update, a device that is actively drawing
2445 * more than 100mA from USB must report itself as bus-powered in
2446 * the GetStatus(DEVICE) call.
2447 */
2448 if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW)
2449 usb_gadget_set_selfpowered(gadget);
2450
2451 /* interface and string IDs start at zero via kzalloc.
2452 * we force endpoints to start unassigned; few controller
2453 * drivers will zero ep->driver_data.
2454 */
2455 usb_ep_autoconfig_reset(gadget);
2456 return 0;
2457fail_dev:
2458 kfree(cdev->req->buf);
2459fail:
2460 usb_ep_free_request(gadget->ep0, cdev->req);
2461 cdev->req = NULL;
2462 return ret;
2463}
2464
2465int composite_os_desc_req_prepare(struct usb_composite_dev *cdev,
2466 struct usb_ep *ep0)
2467{
2468 int ret = 0;
2469
2470 cdev->os_desc_req = usb_ep_alloc_request(ep0, GFP_KERNEL);
2471 if (!cdev->os_desc_req) {
2472 ret = -ENOMEM;
2473 goto end;
2474 }
2475
2476 cdev->os_desc_req->buf = kmalloc(USB_COMP_EP0_OS_DESC_BUFSIZ,
2477 GFP_KERNEL);
2478 if (!cdev->os_desc_req->buf) {
2479 ret = -ENOMEM;
2480 usb_ep_free_request(ep0, cdev->os_desc_req);
2481 goto end;
2482 }
2483 cdev->os_desc_req->context = cdev;
2484 cdev->os_desc_req->complete = composite_setup_complete;
2485end:
2486 return ret;
2487}
2488
2489void composite_dev_cleanup(struct usb_composite_dev *cdev)
2490{
2491 struct usb_gadget_string_container *uc, *tmp;
2492 struct usb_ep *ep, *tmp_ep;
2493
2494 list_for_each_entry_safe(uc, tmp, &cdev->gstrings, list) {
2495 list_del(&uc->list);
2496 kfree(uc);
2497 }
2498 if (cdev->os_desc_req) {
2499 if (cdev->os_desc_pending)
2500 usb_ep_dequeue(cdev->gadget->ep0, cdev->os_desc_req);
2501
2502 kfree(cdev->os_desc_req->buf);
2503 cdev->os_desc_req->buf = NULL;
2504 usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req);
2505 cdev->os_desc_req = NULL;
2506 }
2507 if (cdev->req) {
2508 if (cdev->setup_pending)
2509 usb_ep_dequeue(cdev->gadget->ep0, cdev->req);
2510
2511 kfree(cdev->req->buf);
2512 cdev->req->buf = NULL;
2513 usb_ep_free_request(cdev->gadget->ep0, cdev->req);
2514 cdev->req = NULL;
2515 }
2516 cdev->next_string_id = 0;
2517 device_remove_file(&cdev->gadget->dev, &dev_attr_suspended);
2518
2519 /*
2520 * Some UDC backends have a dynamic EP allocation scheme.
2521 *
2522 * In that case, the dispose() callback is used to notify the
2523 * backend that the EPs are no longer in use.
2524 *
2525 * Note: The UDC backend can remove the EP from the ep_list as
2526 * a result, so we need to use the _safe list iterator.
2527 */
2528 list_for_each_entry_safe(ep, tmp_ep,
2529 &cdev->gadget->ep_list, ep_list) {
2530 if (ep->ops->dispose)
2531 ep->ops->dispose(ep);
2532 }
2533}
2534
2535static int composite_bind(struct usb_gadget *gadget,
2536 struct usb_gadget_driver *gdriver)
2537{
2538 struct usb_composite_dev *cdev;
2539 struct usb_composite_driver *composite = to_cdriver(gdriver);
2540 int status = -ENOMEM;
2541
2542 cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
2543 if (!cdev)
2544 return status;
2545
2546 spin_lock_init(&cdev->lock);
2547 cdev->gadget = gadget;
2548 set_gadget_data(gadget, cdev);
2549 INIT_LIST_HEAD(&cdev->configs);
2550 INIT_LIST_HEAD(&cdev->gstrings);
2551
2552 status = composite_dev_prepare(composite, cdev);
2553 if (status)
2554 goto fail;
2555
2556 /* composite gadget needs to assign strings for whole device (like
2557 * serial number), register function drivers, potentially update
2558 * power state and consumption, etc
2559 */
2560 status = composite->bind(cdev);
2561 if (status < 0)
2562 goto fail;
2563
2564 if (cdev->use_os_string) {
2565 status = composite_os_desc_req_prepare(cdev, gadget->ep0);
2566 if (status)
2567 goto fail;
2568 }
2569
2570 update_unchanged_dev_desc(&cdev->desc, composite->dev);
2571
2572 /* has userspace failed to provide a serial number? */
2573 if (composite->needs_serial && !cdev->desc.iSerialNumber)
2574 WARNING(cdev, "userspace failed to provide iSerialNumber\n");
2575
2576 INFO(cdev, "%s ready\n", composite->name);
2577 return 0;
2578
2579fail:
2580 __composite_unbind(gadget, false);
2581 return status;
2582}
2583
2584/*-------------------------------------------------------------------------*/
2585
2586void composite_suspend(struct usb_gadget *gadget)
2587{
2588 struct usb_composite_dev *cdev = get_gadget_data(gadget);
2589 struct usb_function *f;
2590
2591 /* REVISIT: should we have config level
2592 * suspend/resume callbacks?
2593 */
2594 DBG(cdev, "suspend\n");
2595 if (cdev->config) {
2596 list_for_each_entry(f, &cdev->config->functions, list) {
2597 if (f->suspend)
2598 f->suspend(f);
2599 }
2600 }
2601 if (cdev->driver->suspend)
2602 cdev->driver->suspend(cdev);
2603
2604 cdev->suspended = 1;
2605
2606 usb_gadget_set_selfpowered(gadget);
2607 usb_gadget_vbus_draw(gadget, 2);
2608}
2609
2610void composite_resume(struct usb_gadget *gadget)
2611{
2612 struct usb_composite_dev *cdev = get_gadget_data(gadget);
2613 struct usb_function *f;
2614 unsigned maxpower;
2615
2616 /* REVISIT: should we have config level
2617 * suspend/resume callbacks?
2618 */
2619 DBG(cdev, "resume\n");
2620 if (cdev->driver->resume)
2621 cdev->driver->resume(cdev);
2622 if (cdev->config) {
2623 list_for_each_entry(f, &cdev->config->functions, list) {
2624 /*
2625 * Check for func_suspended flag to see if the function is
2626 * in USB3 FUNCTION_SUSPEND state. In this case resume is
2627 * done via FUNCTION_SUSPEND feature selector.
2628 */
2629 if (f->resume && !f->func_suspended)
2630 f->resume(f);
2631 }
2632
2633 maxpower = cdev->config->MaxPower ?
2634 cdev->config->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
2635 if (gadget->speed < USB_SPEED_SUPER)
2636 maxpower = min(maxpower, 500U);
2637 else
2638 maxpower = min(maxpower, 900U);
2639
2640 if (maxpower > USB_SELF_POWER_VBUS_MAX_DRAW)
2641 usb_gadget_clear_selfpowered(gadget);
2642
2643 usb_gadget_vbus_draw(gadget, maxpower);
2644 } else {
2645 maxpower = CONFIG_USB_GADGET_VBUS_DRAW;
2646 maxpower = min(maxpower, 100U);
2647 usb_gadget_vbus_draw(gadget, maxpower);
2648 }
2649
2650 cdev->suspended = 0;
2651}
2652
2653/*-------------------------------------------------------------------------*/
2654
2655static const struct usb_gadget_driver composite_driver_template = {
2656 .bind = composite_bind,
2657 .unbind = composite_unbind,
2658
2659 .setup = composite_setup,
2660 .reset = composite_reset,
2661 .disconnect = composite_disconnect,
2662
2663 .suspend = composite_suspend,
2664 .resume = composite_resume,
2665
2666 .driver = {
2667 .owner = THIS_MODULE,
2668 },
2669};
2670
2671/**
2672 * usb_composite_probe() - register a composite driver
2673 * @driver: the driver to register
2674 *
2675 * Context: single threaded during gadget setup
2676 *
2677 * This function is used to register drivers using the composite driver
2678 * framework. The return value is zero, or a negative errno value.
2679 * Those values normally come from the driver's @bind method, which does
2680 * all the work of setting up the driver to match the hardware.
2681 *
2682 * On successful return, the gadget is ready to respond to requests from
2683 * the host, unless one of its components invokes usb_gadget_disconnect()
2684 * while it was binding. That would usually be done in order to wait for
2685 * some userspace participation.
2686 */
2687int usb_composite_probe(struct usb_composite_driver *driver)
2688{
2689 struct usb_gadget_driver *gadget_driver;
2690
2691 if (!driver || !driver->dev || !driver->bind)
2692 return -EINVAL;
2693
2694 if (!driver->name)
2695 driver->name = "composite";
2696
2697 driver->gadget_driver = composite_driver_template;
2698 gadget_driver = &driver->gadget_driver;
2699
2700 gadget_driver->function = (char *) driver->name;
2701 gadget_driver->driver.name = driver->name;
2702 gadget_driver->max_speed = driver->max_speed;
2703
2704 return usb_gadget_register_driver(gadget_driver);
2705}
2706EXPORT_SYMBOL_GPL(usb_composite_probe);
2707
2708/**
2709 * usb_composite_unregister() - unregister a composite driver
2710 * @driver: the driver to unregister
2711 *
2712 * This function is used to unregister drivers using the composite
2713 * driver framework.
2714 */
2715void usb_composite_unregister(struct usb_composite_driver *driver)
2716{
2717 usb_gadget_unregister_driver(&driver->gadget_driver);
2718}
2719EXPORT_SYMBOL_GPL(usb_composite_unregister);
2720
2721/**
2722 * usb_composite_setup_continue() - Continue with the control transfer
2723 * @cdev: the composite device who's control transfer was kept waiting
2724 *
2725 * This function must be called by the USB function driver to continue
2726 * with the control transfer's data/status stage in case it had requested to
2727 * delay the data/status stages. A USB function's setup handler (e.g. set_alt())
2728 * can request the composite framework to delay the setup request's data/status
2729 * stages by returning USB_GADGET_DELAYED_STATUS.
2730 */
2731void usb_composite_setup_continue(struct usb_composite_dev *cdev)
2732{
2733 int value;
2734 struct usb_request *req = cdev->req;
2735 unsigned long flags;
2736
2737 DBG(cdev, "%s\n", __func__);
2738 spin_lock_irqsave(&cdev->lock, flags);
2739
2740 if (cdev->delayed_status == 0) {
2741 WARN(cdev, "%s: Unexpected call\n", __func__);
2742
2743 } else if (--cdev->delayed_status == 0) {
2744 DBG(cdev, "%s: Completing delayed status\n", __func__);
2745 req->length = 0;
2746 req->context = cdev;
2747 value = composite_ep0_queue(cdev, req, GFP_ATOMIC);
2748 if (value < 0) {
2749 DBG(cdev, "ep_queue --> %d\n", value);
2750 req->status = 0;
2751 composite_setup_complete(cdev->gadget->ep0, req);
2752 }
2753 }
2754
2755 spin_unlock_irqrestore(&cdev->lock, flags);
2756}
2757EXPORT_SYMBOL_GPL(usb_composite_setup_continue);
2758
2759static char *composite_default_mfr(struct usb_gadget *gadget)
2760{
2761 return kasprintf(GFP_KERNEL, "%s %s with %s", init_utsname()->sysname,
2762 init_utsname()->release, gadget->name);
2763}
2764
2765void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
2766 struct usb_composite_overwrite *covr)
2767{
2768 struct usb_device_descriptor *desc = &cdev->desc;
2769 struct usb_gadget_strings *gstr = cdev->driver->strings[0];
2770 struct usb_string *dev_str = gstr->strings;
2771
2772 if (covr->idVendor)
2773 desc->idVendor = cpu_to_le16(covr->idVendor);
2774
2775 if (covr->idProduct)
2776 desc->idProduct = cpu_to_le16(covr->idProduct);
2777
2778 if (covr->bcdDevice)
2779 desc->bcdDevice = cpu_to_le16(covr->bcdDevice);
2780
2781 if (covr->serial_number) {
2782 desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id;
2783 dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number;
2784 }
2785 if (covr->manufacturer) {
2786 desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
2787 dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer;
2788
2789 } else if (!strlen(dev_str[USB_GADGET_MANUFACTURER_IDX].s)) {
2790 desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
2791 cdev->def_manufacturer = composite_default_mfr(cdev->gadget);
2792 dev_str[USB_GADGET_MANUFACTURER_IDX].s = cdev->def_manufacturer;
2793 }
2794
2795 if (covr->product) {
2796 desc->iProduct = dev_str[USB_GADGET_PRODUCT_IDX].id;
2797 dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product;
2798 }
2799}
2800EXPORT_SYMBOL_GPL(usb_composite_overwrite_options);
2801
2802MODULE_LICENSE("GPL");
2803MODULE_AUTHOR("David Brownell");
1/*
2 * composite.c - infrastructure for Composite USB Gadgets
3 *
4 * Copyright (C) 2006-2008 David Brownell
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
19 */
20
21/* #define VERBOSE_DEBUG */
22
23#include <linux/kallsyms.h>
24#include <linux/kernel.h>
25#include <linux/slab.h>
26#include <linux/device.h>
27#include <linux/utsname.h>
28
29#include <linux/usb/composite.h>
30#include <asm/unaligned.h>
31
32/*
33 * The code in this file is utility code, used to build a gadget driver
34 * from one or more "function" drivers, one or more "configuration"
35 * objects, and a "usb_composite_driver" by gluing them together along
36 * with the relevant device-wide data.
37 */
38
39/* big enough to hold our biggest descriptor */
40#define USB_BUFSIZ 1024
41
42static struct usb_composite_driver *composite;
43static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
44
45/* Some systems will need runtime overrides for the product identifiers
46 * published in the device descriptor, either numbers or strings or both.
47 * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
48 */
49
50static ushort idVendor;
51module_param(idVendor, ushort, 0);
52MODULE_PARM_DESC(idVendor, "USB Vendor ID");
53
54static ushort idProduct;
55module_param(idProduct, ushort, 0);
56MODULE_PARM_DESC(idProduct, "USB Product ID");
57
58static ushort bcdDevice;
59module_param(bcdDevice, ushort, 0);
60MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
61
62static char *iManufacturer;
63module_param(iManufacturer, charp, 0);
64MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
65
66static char *iProduct;
67module_param(iProduct, charp, 0);
68MODULE_PARM_DESC(iProduct, "USB Product string");
69
70static char *iSerialNumber;
71module_param(iSerialNumber, charp, 0);
72MODULE_PARM_DESC(iSerialNumber, "SerialNumber string");
73
74static char composite_manufacturer[50];
75
76/*-------------------------------------------------------------------------*/
77/**
78 * next_ep_desc() - advance to the next EP descriptor
79 * @t: currect pointer within descriptor array
80 *
81 * Return: next EP descriptor or NULL
82 *
83 * Iterate over @t until either EP descriptor found or
84 * NULL (that indicates end of list) encountered
85 */
86static struct usb_descriptor_header**
87next_ep_desc(struct usb_descriptor_header **t)
88{
89 for (; *t; t++) {
90 if ((*t)->bDescriptorType == USB_DT_ENDPOINT)
91 return t;
92 }
93 return NULL;
94}
95
96/*
97 * for_each_ep_desc()- iterate over endpoint descriptors in the
98 * descriptors list
99 * @start: pointer within descriptor array.
100 * @ep_desc: endpoint descriptor to use as the loop cursor
101 */
102#define for_each_ep_desc(start, ep_desc) \
103 for (ep_desc = next_ep_desc(start); \
104 ep_desc; ep_desc = next_ep_desc(ep_desc+1))
105
106/**
107 * config_ep_by_speed() - configures the given endpoint
108 * according to gadget speed.
109 * @g: pointer to the gadget
110 * @f: usb function
111 * @_ep: the endpoint to configure
112 *
113 * Return: error code, 0 on success
114 *
115 * This function chooses the right descriptors for a given
116 * endpoint according to gadget speed and saves it in the
117 * endpoint desc field. If the endpoint already has a descriptor
118 * assigned to it - overwrites it with currently corresponding
119 * descriptor. The endpoint maxpacket field is updated according
120 * to the chosen descriptor.
121 * Note: the supplied function should hold all the descriptors
122 * for supported speeds
123 */
124int config_ep_by_speed(struct usb_gadget *g,
125 struct usb_function *f,
126 struct usb_ep *_ep)
127{
128 struct usb_endpoint_descriptor *chosen_desc = NULL;
129 struct usb_descriptor_header **speed_desc = NULL;
130
131 struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
132 int want_comp_desc = 0;
133
134 struct usb_descriptor_header **d_spd; /* cursor for speed desc */
135
136 if (!g || !f || !_ep)
137 return -EIO;
138
139 /* select desired speed */
140 switch (g->speed) {
141 case USB_SPEED_SUPER:
142 if (gadget_is_superspeed(g)) {
143 speed_desc = f->ss_descriptors;
144 want_comp_desc = 1;
145 break;
146 }
147 /* else: Fall trough */
148 case USB_SPEED_HIGH:
149 if (gadget_is_dualspeed(g)) {
150 speed_desc = f->hs_descriptors;
151 break;
152 }
153 /* else: fall through */
154 default:
155 speed_desc = f->descriptors;
156 }
157 /* find descriptors */
158 for_each_ep_desc(speed_desc, d_spd) {
159 chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
160 if (chosen_desc->bEndpointAddress == _ep->address)
161 goto ep_found;
162 }
163 return -EIO;
164
165ep_found:
166 /* commit results */
167 _ep->maxpacket = le16_to_cpu(chosen_desc->wMaxPacketSize);
168 _ep->desc = chosen_desc;
169 _ep->comp_desc = NULL;
170 _ep->maxburst = 0;
171 _ep->mult = 0;
172 if (!want_comp_desc)
173 return 0;
174
175 /*
176 * Companion descriptor should follow EP descriptor
177 * USB 3.0 spec, #9.6.7
178 */
179 comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd);
180 if (!comp_desc ||
181 (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP))
182 return -EIO;
183 _ep->comp_desc = comp_desc;
184 if (g->speed == USB_SPEED_SUPER) {
185 switch (usb_endpoint_type(_ep->desc)) {
186 case USB_ENDPOINT_XFER_BULK:
187 case USB_ENDPOINT_XFER_INT:
188 _ep->maxburst = comp_desc->bMaxBurst;
189 break;
190 case USB_ENDPOINT_XFER_ISOC:
191 /* mult: bits 1:0 of bmAttributes */
192 _ep->mult = comp_desc->bmAttributes & 0x3;
193 break;
194 default:
195 /* Do nothing for control endpoints */
196 break;
197 }
198 }
199 return 0;
200}
201
202/**
203 * usb_add_function() - add a function to a configuration
204 * @config: the configuration
205 * @function: the function being added
206 * Context: single threaded during gadget setup
207 *
208 * After initialization, each configuration must have one or more
209 * functions added to it. Adding a function involves calling its @bind()
210 * method to allocate resources such as interface and string identifiers
211 * and endpoints.
212 *
213 * This function returns the value of the function's bind(), which is
214 * zero for success else a negative errno value.
215 */
216int usb_add_function(struct usb_configuration *config,
217 struct usb_function *function)
218{
219 int value = -EINVAL;
220
221 DBG(config->cdev, "adding '%s'/%p to config '%s'/%p\n",
222 function->name, function,
223 config->label, config);
224
225 if (!function->set_alt || !function->disable)
226 goto done;
227
228 function->config = config;
229 list_add_tail(&function->list, &config->functions);
230
231 /* REVISIT *require* function->bind? */
232 if (function->bind) {
233 value = function->bind(config, function);
234 if (value < 0) {
235 list_del(&function->list);
236 function->config = NULL;
237 }
238 } else
239 value = 0;
240
241 /* We allow configurations that don't work at both speeds.
242 * If we run into a lowspeed Linux system, treat it the same
243 * as full speed ... it's the function drivers that will need
244 * to avoid bulk and ISO transfers.
245 */
246 if (!config->fullspeed && function->descriptors)
247 config->fullspeed = true;
248 if (!config->highspeed && function->hs_descriptors)
249 config->highspeed = true;
250 if (!config->superspeed && function->ss_descriptors)
251 config->superspeed = true;
252
253done:
254 if (value)
255 DBG(config->cdev, "adding '%s'/%p --> %d\n",
256 function->name, function, value);
257 return value;
258}
259
260/**
261 * usb_function_deactivate - prevent function and gadget enumeration
262 * @function: the function that isn't yet ready to respond
263 *
264 * Blocks response of the gadget driver to host enumeration by
265 * preventing the data line pullup from being activated. This is
266 * normally called during @bind() processing to change from the
267 * initial "ready to respond" state, or when a required resource
268 * becomes available.
269 *
270 * For example, drivers that serve as a passthrough to a userspace
271 * daemon can block enumeration unless that daemon (such as an OBEX,
272 * MTP, or print server) is ready to handle host requests.
273 *
274 * Not all systems support software control of their USB peripheral
275 * data pullups.
276 *
277 * Returns zero on success, else negative errno.
278 */
279int usb_function_deactivate(struct usb_function *function)
280{
281 struct usb_composite_dev *cdev = function->config->cdev;
282 unsigned long flags;
283 int status = 0;
284
285 spin_lock_irqsave(&cdev->lock, flags);
286
287 if (cdev->deactivations == 0)
288 status = usb_gadget_disconnect(cdev->gadget);
289 if (status == 0)
290 cdev->deactivations++;
291
292 spin_unlock_irqrestore(&cdev->lock, flags);
293 return status;
294}
295
296/**
297 * usb_function_activate - allow function and gadget enumeration
298 * @function: function on which usb_function_activate() was called
299 *
300 * Reverses effect of usb_function_deactivate(). If no more functions
301 * are delaying their activation, the gadget driver will respond to
302 * host enumeration procedures.
303 *
304 * Returns zero on success, else negative errno.
305 */
306int usb_function_activate(struct usb_function *function)
307{
308 struct usb_composite_dev *cdev = function->config->cdev;
309 int status = 0;
310
311 spin_lock(&cdev->lock);
312
313 if (WARN_ON(cdev->deactivations == 0))
314 status = -EINVAL;
315 else {
316 cdev->deactivations--;
317 if (cdev->deactivations == 0)
318 status = usb_gadget_connect(cdev->gadget);
319 }
320
321 spin_unlock(&cdev->lock);
322 return status;
323}
324
325/**
326 * usb_interface_id() - allocate an unused interface ID
327 * @config: configuration associated with the interface
328 * @function: function handling the interface
329 * Context: single threaded during gadget setup
330 *
331 * usb_interface_id() is called from usb_function.bind() callbacks to
332 * allocate new interface IDs. The function driver will then store that
333 * ID in interface, association, CDC union, and other descriptors. It
334 * will also handle any control requests targeted at that interface,
335 * particularly changing its altsetting via set_alt(). There may
336 * also be class-specific or vendor-specific requests to handle.
337 *
338 * All interface identifier should be allocated using this routine, to
339 * ensure that for example different functions don't wrongly assign
340 * different meanings to the same identifier. Note that since interface
341 * identifiers are configuration-specific, functions used in more than
342 * one configuration (or more than once in a given configuration) need
343 * multiple versions of the relevant descriptors.
344 *
345 * Returns the interface ID which was allocated; or -ENODEV if no
346 * more interface IDs can be allocated.
347 */
348int usb_interface_id(struct usb_configuration *config,
349 struct usb_function *function)
350{
351 unsigned id = config->next_interface_id;
352
353 if (id < MAX_CONFIG_INTERFACES) {
354 config->interface[id] = function;
355 config->next_interface_id = id + 1;
356 return id;
357 }
358 return -ENODEV;
359}
360
361static int config_buf(struct usb_configuration *config,
362 enum usb_device_speed speed, void *buf, u8 type)
363{
364 struct usb_config_descriptor *c = buf;
365 void *next = buf + USB_DT_CONFIG_SIZE;
366 int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
367 struct usb_function *f;
368 int status;
369
370 /* write the config descriptor */
371 c = buf;
372 c->bLength = USB_DT_CONFIG_SIZE;
373 c->bDescriptorType = type;
374 /* wTotalLength is written later */
375 c->bNumInterfaces = config->next_interface_id;
376 c->bConfigurationValue = config->bConfigurationValue;
377 c->iConfiguration = config->iConfiguration;
378 c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
379 c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2);
380
381 /* There may be e.g. OTG descriptors */
382 if (config->descriptors) {
383 status = usb_descriptor_fillbuf(next, len,
384 config->descriptors);
385 if (status < 0)
386 return status;
387 len -= status;
388 next += status;
389 }
390
391 /* add each function's descriptors */
392 list_for_each_entry(f, &config->functions, list) {
393 struct usb_descriptor_header **descriptors;
394
395 switch (speed) {
396 case USB_SPEED_SUPER:
397 descriptors = f->ss_descriptors;
398 break;
399 case USB_SPEED_HIGH:
400 descriptors = f->hs_descriptors;
401 break;
402 default:
403 descriptors = f->descriptors;
404 }
405
406 if (!descriptors)
407 continue;
408 status = usb_descriptor_fillbuf(next, len,
409 (const struct usb_descriptor_header **) descriptors);
410 if (status < 0)
411 return status;
412 len -= status;
413 next += status;
414 }
415
416 len = next - buf;
417 c->wTotalLength = cpu_to_le16(len);
418 return len;
419}
420
421static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
422{
423 struct usb_gadget *gadget = cdev->gadget;
424 struct usb_configuration *c;
425 u8 type = w_value >> 8;
426 enum usb_device_speed speed = USB_SPEED_UNKNOWN;
427
428 if (gadget->speed == USB_SPEED_SUPER)
429 speed = gadget->speed;
430 else if (gadget_is_dualspeed(gadget)) {
431 int hs = 0;
432 if (gadget->speed == USB_SPEED_HIGH)
433 hs = 1;
434 if (type == USB_DT_OTHER_SPEED_CONFIG)
435 hs = !hs;
436 if (hs)
437 speed = USB_SPEED_HIGH;
438
439 }
440
441 /* This is a lookup by config *INDEX* */
442 w_value &= 0xff;
443 list_for_each_entry(c, &cdev->configs, list) {
444 /* ignore configs that won't work at this speed */
445 switch (speed) {
446 case USB_SPEED_SUPER:
447 if (!c->superspeed)
448 continue;
449 break;
450 case USB_SPEED_HIGH:
451 if (!c->highspeed)
452 continue;
453 break;
454 default:
455 if (!c->fullspeed)
456 continue;
457 }
458
459 if (w_value == 0)
460 return config_buf(c, speed, cdev->req->buf, type);
461 w_value--;
462 }
463 return -EINVAL;
464}
465
466static int count_configs(struct usb_composite_dev *cdev, unsigned type)
467{
468 struct usb_gadget *gadget = cdev->gadget;
469 struct usb_configuration *c;
470 unsigned count = 0;
471 int hs = 0;
472 int ss = 0;
473
474 if (gadget_is_dualspeed(gadget)) {
475 if (gadget->speed == USB_SPEED_HIGH)
476 hs = 1;
477 if (gadget->speed == USB_SPEED_SUPER)
478 ss = 1;
479 if (type == USB_DT_DEVICE_QUALIFIER)
480 hs = !hs;
481 }
482 list_for_each_entry(c, &cdev->configs, list) {
483 /* ignore configs that won't work at this speed */
484 if (ss) {
485 if (!c->superspeed)
486 continue;
487 } else if (hs) {
488 if (!c->highspeed)
489 continue;
490 } else {
491 if (!c->fullspeed)
492 continue;
493 }
494 count++;
495 }
496 return count;
497}
498
499/**
500 * bos_desc() - prepares the BOS descriptor.
501 * @cdev: pointer to usb_composite device to generate the bos
502 * descriptor for
503 *
504 * This function generates the BOS (Binary Device Object)
505 * descriptor and its device capabilities descriptors. The BOS
506 * descriptor should be supported by a SuperSpeed device.
507 */
508static int bos_desc(struct usb_composite_dev *cdev)
509{
510 struct usb_ext_cap_descriptor *usb_ext;
511 struct usb_ss_cap_descriptor *ss_cap;
512 struct usb_dcd_config_params dcd_config_params;
513 struct usb_bos_descriptor *bos = cdev->req->buf;
514
515 bos->bLength = USB_DT_BOS_SIZE;
516 bos->bDescriptorType = USB_DT_BOS;
517
518 bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
519 bos->bNumDeviceCaps = 0;
520
521 /*
522 * A SuperSpeed device shall include the USB2.0 extension descriptor
523 * and shall support LPM when operating in USB2.0 HS mode.
524 */
525 usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
526 bos->bNumDeviceCaps++;
527 le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
528 usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
529 usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
530 usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
531 usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
532
533 /*
534 * The Superspeed USB Capability descriptor shall be implemented by all
535 * SuperSpeed devices.
536 */
537 ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
538 bos->bNumDeviceCaps++;
539 le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
540 ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
541 ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
542 ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
543 ss_cap->bmAttributes = 0; /* LTM is not supported yet */
544 ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION |
545 USB_FULL_SPEED_OPERATION |
546 USB_HIGH_SPEED_OPERATION |
547 USB_5GBPS_OPERATION);
548 ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
549
550 /* Get Controller configuration */
551 if (cdev->gadget->ops->get_config_params)
552 cdev->gadget->ops->get_config_params(&dcd_config_params);
553 else {
554 dcd_config_params.bU1devExitLat = USB_DEFULT_U1_DEV_EXIT_LAT;
555 dcd_config_params.bU2DevExitLat =
556 cpu_to_le16(USB_DEFULT_U2_DEV_EXIT_LAT);
557 }
558 ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
559 ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
560
561 return le16_to_cpu(bos->wTotalLength);
562}
563
564static void device_qual(struct usb_composite_dev *cdev)
565{
566 struct usb_qualifier_descriptor *qual = cdev->req->buf;
567
568 qual->bLength = sizeof(*qual);
569 qual->bDescriptorType = USB_DT_DEVICE_QUALIFIER;
570 /* POLICY: same bcdUSB and device type info at both speeds */
571 qual->bcdUSB = cdev->desc.bcdUSB;
572 qual->bDeviceClass = cdev->desc.bDeviceClass;
573 qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
574 qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
575 /* ASSUME same EP0 fifo size at both speeds */
576 qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket;
577 qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
578 qual->bRESERVED = 0;
579}
580
581/*-------------------------------------------------------------------------*/
582
583static void reset_config(struct usb_composite_dev *cdev)
584{
585 struct usb_function *f;
586
587 DBG(cdev, "reset config\n");
588
589 list_for_each_entry(f, &cdev->config->functions, list) {
590 if (f->disable)
591 f->disable(f);
592
593 bitmap_zero(f->endpoints, 32);
594 }
595 cdev->config = NULL;
596}
597
598static int set_config(struct usb_composite_dev *cdev,
599 const struct usb_ctrlrequest *ctrl, unsigned number)
600{
601 struct usb_gadget *gadget = cdev->gadget;
602 struct usb_configuration *c = NULL;
603 int result = -EINVAL;
604 unsigned power = gadget_is_otg(gadget) ? 8 : 100;
605 int tmp;
606
607 if (number) {
608 list_for_each_entry(c, &cdev->configs, list) {
609 if (c->bConfigurationValue == number) {
610 /*
611 * We disable the FDs of the previous
612 * configuration only if the new configuration
613 * is a valid one
614 */
615 if (cdev->config)
616 reset_config(cdev);
617 result = 0;
618 break;
619 }
620 }
621 if (result < 0)
622 goto done;
623 } else { /* Zero configuration value - need to reset the config */
624 if (cdev->config)
625 reset_config(cdev);
626 result = 0;
627 }
628
629 INFO(cdev, "%s speed config #%d: %s\n",
630 ({ char *speed;
631 switch (gadget->speed) {
632 case USB_SPEED_LOW:
633 speed = "low";
634 break;
635 case USB_SPEED_FULL:
636 speed = "full";
637 break;
638 case USB_SPEED_HIGH:
639 speed = "high";
640 break;
641 case USB_SPEED_SUPER:
642 speed = "super";
643 break;
644 default:
645 speed = "?";
646 break;
647 } ; speed; }), number, c ? c->label : "unconfigured");
648
649 if (!c)
650 goto done;
651
652 cdev->config = c;
653
654 /* Initialize all interfaces by setting them to altsetting zero. */
655 for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
656 struct usb_function *f = c->interface[tmp];
657 struct usb_descriptor_header **descriptors;
658
659 if (!f)
660 break;
661
662 /*
663 * Record which endpoints are used by the function. This is used
664 * to dispatch control requests targeted at that endpoint to the
665 * function's setup callback instead of the current
666 * configuration's setup callback.
667 */
668 switch (gadget->speed) {
669 case USB_SPEED_SUPER:
670 descriptors = f->ss_descriptors;
671 break;
672 case USB_SPEED_HIGH:
673 descriptors = f->hs_descriptors;
674 break;
675 default:
676 descriptors = f->descriptors;
677 }
678
679 for (; *descriptors; ++descriptors) {
680 struct usb_endpoint_descriptor *ep;
681 int addr;
682
683 if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
684 continue;
685
686 ep = (struct usb_endpoint_descriptor *)*descriptors;
687 addr = ((ep->bEndpointAddress & 0x80) >> 3)
688 | (ep->bEndpointAddress & 0x0f);
689 set_bit(addr, f->endpoints);
690 }
691
692 result = f->set_alt(f, tmp, 0);
693 if (result < 0) {
694 DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n",
695 tmp, f->name, f, result);
696
697 reset_config(cdev);
698 goto done;
699 }
700
701 if (result == USB_GADGET_DELAYED_STATUS) {
702 DBG(cdev,
703 "%s: interface %d (%s) requested delayed status\n",
704 __func__, tmp, f->name);
705 cdev->delayed_status++;
706 DBG(cdev, "delayed_status count %d\n",
707 cdev->delayed_status);
708 }
709 }
710
711 /* when we return, be sure our power usage is valid */
712 power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW;
713done:
714 usb_gadget_vbus_draw(gadget, power);
715 if (result >= 0 && cdev->delayed_status)
716 result = USB_GADGET_DELAYED_STATUS;
717 return result;
718}
719
720/**
721 * usb_add_config() - add a configuration to a device.
722 * @cdev: wraps the USB gadget
723 * @config: the configuration, with bConfigurationValue assigned
724 * @bind: the configuration's bind function
725 * Context: single threaded during gadget setup
726 *
727 * One of the main tasks of a composite @bind() routine is to
728 * add each of the configurations it supports, using this routine.
729 *
730 * This function returns the value of the configuration's @bind(), which
731 * is zero for success else a negative errno value. Binding configurations
732 * assigns global resources including string IDs, and per-configuration
733 * resources such as interface IDs and endpoints.
734 */
735int usb_add_config(struct usb_composite_dev *cdev,
736 struct usb_configuration *config,
737 int (*bind)(struct usb_configuration *))
738{
739 int status = -EINVAL;
740 struct usb_configuration *c;
741
742 DBG(cdev, "adding config #%u '%s'/%p\n",
743 config->bConfigurationValue,
744 config->label, config);
745
746 if (!config->bConfigurationValue || !bind)
747 goto done;
748
749 /* Prevent duplicate configuration identifiers */
750 list_for_each_entry(c, &cdev->configs, list) {
751 if (c->bConfigurationValue == config->bConfigurationValue) {
752 status = -EBUSY;
753 goto done;
754 }
755 }
756
757 config->cdev = cdev;
758 list_add_tail(&config->list, &cdev->configs);
759
760 INIT_LIST_HEAD(&config->functions);
761 config->next_interface_id = 0;
762
763 status = bind(config);
764 if (status < 0) {
765 list_del(&config->list);
766 config->cdev = NULL;
767 } else {
768 unsigned i;
769
770 DBG(cdev, "cfg %d/%p speeds:%s%s%s\n",
771 config->bConfigurationValue, config,
772 config->superspeed ? " super" : "",
773 config->highspeed ? " high" : "",
774 config->fullspeed
775 ? (gadget_is_dualspeed(cdev->gadget)
776 ? " full"
777 : " full/low")
778 : "");
779
780 for (i = 0; i < MAX_CONFIG_INTERFACES; i++) {
781 struct usb_function *f = config->interface[i];
782
783 if (!f)
784 continue;
785 DBG(cdev, " interface %d = %s/%p\n",
786 i, f->name, f);
787 }
788 }
789
790 /* set_alt(), or next bind(), sets up
791 * ep->driver_data as needed.
792 */
793 usb_ep_autoconfig_reset(cdev->gadget);
794
795done:
796 if (status)
797 DBG(cdev, "added config '%s'/%u --> %d\n", config->label,
798 config->bConfigurationValue, status);
799 return status;
800}
801
802/*-------------------------------------------------------------------------*/
803
804/* We support strings in multiple languages ... string descriptor zero
805 * says which languages are supported. The typical case will be that
806 * only one language (probably English) is used, with I18N handled on
807 * the host side.
808 */
809
810static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
811{
812 const struct usb_gadget_strings *s;
813 u16 language;
814 __le16 *tmp;
815
816 while (*sp) {
817 s = *sp;
818 language = cpu_to_le16(s->language);
819 for (tmp = buf; *tmp && tmp < &buf[126]; tmp++) {
820 if (*tmp == language)
821 goto repeat;
822 }
823 *tmp++ = language;
824repeat:
825 sp++;
826 }
827}
828
829static int lookup_string(
830 struct usb_gadget_strings **sp,
831 void *buf,
832 u16 language,
833 int id
834)
835{
836 struct usb_gadget_strings *s;
837 int value;
838
839 while (*sp) {
840 s = *sp++;
841 if (s->language != language)
842 continue;
843 value = usb_gadget_get_string(s, id, buf);
844 if (value > 0)
845 return value;
846 }
847 return -EINVAL;
848}
849
850static int get_string(struct usb_composite_dev *cdev,
851 void *buf, u16 language, int id)
852{
853 struct usb_configuration *c;
854 struct usb_function *f;
855 int len;
856 const char *str;
857
858 /* Yes, not only is USB's I18N support probably more than most
859 * folk will ever care about ... also, it's all supported here.
860 * (Except for UTF8 support for Unicode's "Astral Planes".)
861 */
862
863 /* 0 == report all available language codes */
864 if (id == 0) {
865 struct usb_string_descriptor *s = buf;
866 struct usb_gadget_strings **sp;
867
868 memset(s, 0, 256);
869 s->bDescriptorType = USB_DT_STRING;
870
871 sp = composite->strings;
872 if (sp)
873 collect_langs(sp, s->wData);
874
875 list_for_each_entry(c, &cdev->configs, list) {
876 sp = c->strings;
877 if (sp)
878 collect_langs(sp, s->wData);
879
880 list_for_each_entry(f, &c->functions, list) {
881 sp = f->strings;
882 if (sp)
883 collect_langs(sp, s->wData);
884 }
885 }
886
887 for (len = 0; len <= 126 && s->wData[len]; len++)
888 continue;
889 if (!len)
890 return -EINVAL;
891
892 s->bLength = 2 * (len + 1);
893 return s->bLength;
894 }
895
896 /* Otherwise, look up and return a specified string. First
897 * check if the string has not been overridden.
898 */
899 if (cdev->manufacturer_override == id)
900 str = iManufacturer ?: composite->iManufacturer ?:
901 composite_manufacturer;
902 else if (cdev->product_override == id)
903 str = iProduct ?: composite->iProduct;
904 else if (cdev->serial_override == id)
905 str = iSerialNumber;
906 else
907 str = NULL;
908 if (str) {
909 struct usb_gadget_strings strings = {
910 .language = language,
911 .strings = &(struct usb_string) { 0xff, str }
912 };
913 return usb_gadget_get_string(&strings, 0xff, buf);
914 }
915
916 /* String IDs are device-scoped, so we look up each string
917 * table we're told about. These lookups are infrequent;
918 * simpler-is-better here.
919 */
920 if (composite->strings) {
921 len = lookup_string(composite->strings, buf, language, id);
922 if (len > 0)
923 return len;
924 }
925 list_for_each_entry(c, &cdev->configs, list) {
926 if (c->strings) {
927 len = lookup_string(c->strings, buf, language, id);
928 if (len > 0)
929 return len;
930 }
931 list_for_each_entry(f, &c->functions, list) {
932 if (!f->strings)
933 continue;
934 len = lookup_string(f->strings, buf, language, id);
935 if (len > 0)
936 return len;
937 }
938 }
939 return -EINVAL;
940}
941
942/**
943 * usb_string_id() - allocate an unused string ID
944 * @cdev: the device whose string descriptor IDs are being allocated
945 * Context: single threaded during gadget setup
946 *
947 * @usb_string_id() is called from bind() callbacks to allocate
948 * string IDs. Drivers for functions, configurations, or gadgets will
949 * then store that ID in the appropriate descriptors and string table.
950 *
951 * All string identifier should be allocated using this,
952 * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
953 * that for example different functions don't wrongly assign different
954 * meanings to the same identifier.
955 */
956int usb_string_id(struct usb_composite_dev *cdev)
957{
958 if (cdev->next_string_id < 254) {
959 /* string id 0 is reserved by USB spec for list of
960 * supported languages */
961 /* 255 reserved as well? -- mina86 */
962 cdev->next_string_id++;
963 return cdev->next_string_id;
964 }
965 return -ENODEV;
966}
967
968/**
969 * usb_string_ids() - allocate unused string IDs in batch
970 * @cdev: the device whose string descriptor IDs are being allocated
971 * @str: an array of usb_string objects to assign numbers to
972 * Context: single threaded during gadget setup
973 *
974 * @usb_string_ids() is called from bind() callbacks to allocate
975 * string IDs. Drivers for functions, configurations, or gadgets will
976 * then copy IDs from the string table to the appropriate descriptors
977 * and string table for other languages.
978 *
979 * All string identifier should be allocated using this,
980 * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
981 * example different functions don't wrongly assign different meanings
982 * to the same identifier.
983 */
984int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
985{
986 int next = cdev->next_string_id;
987
988 for (; str->s; ++str) {
989 if (unlikely(next >= 254))
990 return -ENODEV;
991 str->id = ++next;
992 }
993
994 cdev->next_string_id = next;
995
996 return 0;
997}
998
999/**
1000 * usb_string_ids_n() - allocate unused string IDs in batch
1001 * @c: the device whose string descriptor IDs are being allocated
1002 * @n: number of string IDs to allocate
1003 * Context: single threaded during gadget setup
1004 *
1005 * Returns the first requested ID. This ID and next @n-1 IDs are now
1006 * valid IDs. At least provided that @n is non-zero because if it
1007 * is, returns last requested ID which is now very useful information.
1008 *
1009 * @usb_string_ids_n() is called from bind() callbacks to allocate
1010 * string IDs. Drivers for functions, configurations, or gadgets will
1011 * then store that ID in the appropriate descriptors and string table.
1012 *
1013 * All string identifier should be allocated using this,
1014 * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
1015 * example different functions don't wrongly assign different meanings
1016 * to the same identifier.
1017 */
1018int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
1019{
1020 unsigned next = c->next_string_id;
1021 if (unlikely(n > 254 || (unsigned)next + n > 254))
1022 return -ENODEV;
1023 c->next_string_id += n;
1024 return next + 1;
1025}
1026
1027
1028/*-------------------------------------------------------------------------*/
1029
1030static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
1031{
1032 if (req->status || req->actual != req->length)
1033 DBG((struct usb_composite_dev *) ep->driver_data,
1034 "setup complete --> %d, %d/%d\n",
1035 req->status, req->actual, req->length);
1036}
1037
1038/*
1039 * The setup() callback implements all the ep0 functionality that's
1040 * not handled lower down, in hardware or the hardware driver(like
1041 * device and endpoint feature flags, and their status). It's all
1042 * housekeeping for the gadget function we're implementing. Most of
1043 * the work is in config and function specific setup.
1044 */
1045static int
1046composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
1047{
1048 struct usb_composite_dev *cdev = get_gadget_data(gadget);
1049 struct usb_request *req = cdev->req;
1050 int value = -EOPNOTSUPP;
1051 int status = 0;
1052 u16 w_index = le16_to_cpu(ctrl->wIndex);
1053 u8 intf = w_index & 0xFF;
1054 u16 w_value = le16_to_cpu(ctrl->wValue);
1055 u16 w_length = le16_to_cpu(ctrl->wLength);
1056 struct usb_function *f = NULL;
1057 u8 endp;
1058
1059 /* partial re-init of the response message; the function or the
1060 * gadget might need to intercept e.g. a control-OUT completion
1061 * when we delegate to it.
1062 */
1063 req->zero = 0;
1064 req->complete = composite_setup_complete;
1065 req->length = 0;
1066 gadget->ep0->driver_data = cdev;
1067
1068 switch (ctrl->bRequest) {
1069
1070 /* we handle all standard USB descriptors */
1071 case USB_REQ_GET_DESCRIPTOR:
1072 if (ctrl->bRequestType != USB_DIR_IN)
1073 goto unknown;
1074 switch (w_value >> 8) {
1075
1076 case USB_DT_DEVICE:
1077 cdev->desc.bNumConfigurations =
1078 count_configs(cdev, USB_DT_DEVICE);
1079 cdev->desc.bMaxPacketSize0 =
1080 cdev->gadget->ep0->maxpacket;
1081 if (gadget_is_superspeed(gadget)) {
1082 if (gadget->speed >= USB_SPEED_SUPER) {
1083 cdev->desc.bcdUSB = cpu_to_le16(0x0300);
1084 cdev->desc.bMaxPacketSize0 = 9;
1085 } else {
1086 cdev->desc.bcdUSB = cpu_to_le16(0x0210);
1087 }
1088 }
1089
1090 value = min(w_length, (u16) sizeof cdev->desc);
1091 memcpy(req->buf, &cdev->desc, value);
1092 break;
1093 case USB_DT_DEVICE_QUALIFIER:
1094 if (!gadget_is_dualspeed(gadget) ||
1095 gadget->speed >= USB_SPEED_SUPER)
1096 break;
1097 device_qual(cdev);
1098 value = min_t(int, w_length,
1099 sizeof(struct usb_qualifier_descriptor));
1100 break;
1101 case USB_DT_OTHER_SPEED_CONFIG:
1102 if (!gadget_is_dualspeed(gadget) ||
1103 gadget->speed >= USB_SPEED_SUPER)
1104 break;
1105 /* FALLTHROUGH */
1106 case USB_DT_CONFIG:
1107 value = config_desc(cdev, w_value);
1108 if (value >= 0)
1109 value = min(w_length, (u16) value);
1110 break;
1111 case USB_DT_STRING:
1112 value = get_string(cdev, req->buf,
1113 w_index, w_value & 0xff);
1114 if (value >= 0)
1115 value = min(w_length, (u16) value);
1116 break;
1117 case USB_DT_BOS:
1118 if (gadget_is_superspeed(gadget)) {
1119 value = bos_desc(cdev);
1120 value = min(w_length, (u16) value);
1121 }
1122 break;
1123 }
1124 break;
1125
1126 /* any number of configs can work */
1127 case USB_REQ_SET_CONFIGURATION:
1128 if (ctrl->bRequestType != 0)
1129 goto unknown;
1130 if (gadget_is_otg(gadget)) {
1131 if (gadget->a_hnp_support)
1132 DBG(cdev, "HNP available\n");
1133 else if (gadget->a_alt_hnp_support)
1134 DBG(cdev, "HNP on another port\n");
1135 else
1136 VDBG(cdev, "HNP inactive\n");
1137 }
1138 spin_lock(&cdev->lock);
1139 value = set_config(cdev, ctrl, w_value);
1140 spin_unlock(&cdev->lock);
1141 break;
1142 case USB_REQ_GET_CONFIGURATION:
1143 if (ctrl->bRequestType != USB_DIR_IN)
1144 goto unknown;
1145 if (cdev->config)
1146 *(u8 *)req->buf = cdev->config->bConfigurationValue;
1147 else
1148 *(u8 *)req->buf = 0;
1149 value = min(w_length, (u16) 1);
1150 break;
1151
1152 /* function drivers must handle get/set altsetting; if there's
1153 * no get() method, we know only altsetting zero works.
1154 */
1155 case USB_REQ_SET_INTERFACE:
1156 if (ctrl->bRequestType != USB_RECIP_INTERFACE)
1157 goto unknown;
1158 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
1159 break;
1160 f = cdev->config->interface[intf];
1161 if (!f)
1162 break;
1163 if (w_value && !f->set_alt)
1164 break;
1165 value = f->set_alt(f, w_index, w_value);
1166 if (value == USB_GADGET_DELAYED_STATUS) {
1167 DBG(cdev,
1168 "%s: interface %d (%s) requested delayed status\n",
1169 __func__, intf, f->name);
1170 cdev->delayed_status++;
1171 DBG(cdev, "delayed_status count %d\n",
1172 cdev->delayed_status);
1173 }
1174 break;
1175 case USB_REQ_GET_INTERFACE:
1176 if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
1177 goto unknown;
1178 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
1179 break;
1180 f = cdev->config->interface[intf];
1181 if (!f)
1182 break;
1183 /* lots of interfaces only need altsetting zero... */
1184 value = f->get_alt ? f->get_alt(f, w_index) : 0;
1185 if (value < 0)
1186 break;
1187 *((u8 *)req->buf) = value;
1188 value = min(w_length, (u16) 1);
1189 break;
1190
1191 /*
1192 * USB 3.0 additions:
1193 * Function driver should handle get_status request. If such cb
1194 * wasn't supplied we respond with default value = 0
1195 * Note: function driver should supply such cb only for the first
1196 * interface of the function
1197 */
1198 case USB_REQ_GET_STATUS:
1199 if (!gadget_is_superspeed(gadget))
1200 goto unknown;
1201 if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE))
1202 goto unknown;
1203 value = 2; /* This is the length of the get_status reply */
1204 put_unaligned_le16(0, req->buf);
1205 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
1206 break;
1207 f = cdev->config->interface[intf];
1208 if (!f)
1209 break;
1210 status = f->get_status ? f->get_status(f) : 0;
1211 if (status < 0)
1212 break;
1213 put_unaligned_le16(status & 0x0000ffff, req->buf);
1214 break;
1215 /*
1216 * Function drivers should handle SetFeature/ClearFeature
1217 * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied
1218 * only for the first interface of the function
1219 */
1220 case USB_REQ_CLEAR_FEATURE:
1221 case USB_REQ_SET_FEATURE:
1222 if (!gadget_is_superspeed(gadget))
1223 goto unknown;
1224 if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE))
1225 goto unknown;
1226 switch (w_value) {
1227 case USB_INTRF_FUNC_SUSPEND:
1228 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
1229 break;
1230 f = cdev->config->interface[intf];
1231 if (!f)
1232 break;
1233 value = 0;
1234 if (f->func_suspend)
1235 value = f->func_suspend(f, w_index >> 8);
1236 if (value < 0) {
1237 ERROR(cdev,
1238 "func_suspend() returned error %d\n",
1239 value);
1240 value = 0;
1241 }
1242 break;
1243 }
1244 break;
1245 default:
1246unknown:
1247 VDBG(cdev,
1248 "non-core control req%02x.%02x v%04x i%04x l%d\n",
1249 ctrl->bRequestType, ctrl->bRequest,
1250 w_value, w_index, w_length);
1251
1252 /* functions always handle their interfaces and endpoints...
1253 * punt other recipients (other, WUSB, ...) to the current
1254 * configuration code.
1255 *
1256 * REVISIT it could make sense to let the composite device
1257 * take such requests too, if that's ever needed: to work
1258 * in config 0, etc.
1259 */
1260 switch (ctrl->bRequestType & USB_RECIP_MASK) {
1261 case USB_RECIP_INTERFACE:
1262 if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
1263 break;
1264 f = cdev->config->interface[intf];
1265 break;
1266
1267 case USB_RECIP_ENDPOINT:
1268 endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
1269 list_for_each_entry(f, &cdev->config->functions, list) {
1270 if (test_bit(endp, f->endpoints))
1271 break;
1272 }
1273 if (&f->list == &cdev->config->functions)
1274 f = NULL;
1275 break;
1276 }
1277
1278 if (f && f->setup)
1279 value = f->setup(f, ctrl);
1280 else {
1281 struct usb_configuration *c;
1282
1283 c = cdev->config;
1284 if (c && c->setup)
1285 value = c->setup(c, ctrl);
1286 }
1287
1288 goto done;
1289 }
1290
1291 /* respond with data transfer before status phase? */
1292 if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) {
1293 req->length = value;
1294 req->zero = value < w_length;
1295 value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1296 if (value < 0) {
1297 DBG(cdev, "ep_queue --> %d\n", value);
1298 req->status = 0;
1299 composite_setup_complete(gadget->ep0, req);
1300 }
1301 } else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) {
1302 WARN(cdev,
1303 "%s: Delayed status not supported for w_length != 0",
1304 __func__);
1305 }
1306
1307done:
1308 /* device either stalls (value < 0) or reports success */
1309 return value;
1310}
1311
1312static void composite_disconnect(struct usb_gadget *gadget)
1313{
1314 struct usb_composite_dev *cdev = get_gadget_data(gadget);
1315 unsigned long flags;
1316
1317 /* REVISIT: should we have config and device level
1318 * disconnect callbacks?
1319 */
1320 spin_lock_irqsave(&cdev->lock, flags);
1321 if (cdev->config)
1322 reset_config(cdev);
1323 if (composite->disconnect)
1324 composite->disconnect(cdev);
1325 spin_unlock_irqrestore(&cdev->lock, flags);
1326}
1327
1328/*-------------------------------------------------------------------------*/
1329
1330static ssize_t composite_show_suspended(struct device *dev,
1331 struct device_attribute *attr,
1332 char *buf)
1333{
1334 struct usb_gadget *gadget = dev_to_usb_gadget(dev);
1335 struct usb_composite_dev *cdev = get_gadget_data(gadget);
1336
1337 return sprintf(buf, "%d\n", cdev->suspended);
1338}
1339
1340static DEVICE_ATTR(suspended, 0444, composite_show_suspended, NULL);
1341
1342static void
1343composite_unbind(struct usb_gadget *gadget)
1344{
1345 struct usb_composite_dev *cdev = get_gadget_data(gadget);
1346
1347 /* composite_disconnect() must already have been called
1348 * by the underlying peripheral controller driver!
1349 * so there's no i/o concurrency that could affect the
1350 * state protected by cdev->lock.
1351 */
1352 WARN_ON(cdev->config);
1353
1354 while (!list_empty(&cdev->configs)) {
1355 struct usb_configuration *c;
1356
1357 c = list_first_entry(&cdev->configs,
1358 struct usb_configuration, list);
1359 while (!list_empty(&c->functions)) {
1360 struct usb_function *f;
1361
1362 f = list_first_entry(&c->functions,
1363 struct usb_function, list);
1364 list_del(&f->list);
1365 if (f->unbind) {
1366 DBG(cdev, "unbind function '%s'/%p\n",
1367 f->name, f);
1368 f->unbind(c, f);
1369 /* may free memory for "f" */
1370 }
1371 }
1372 list_del(&c->list);
1373 if (c->unbind) {
1374 DBG(cdev, "unbind config '%s'/%p\n", c->label, c);
1375 c->unbind(c);
1376 /* may free memory for "c" */
1377 }
1378 }
1379 if (composite->unbind)
1380 composite->unbind(cdev);
1381
1382 if (cdev->req) {
1383 kfree(cdev->req->buf);
1384 usb_ep_free_request(gadget->ep0, cdev->req);
1385 }
1386 device_remove_file(&gadget->dev, &dev_attr_suspended);
1387 kfree(cdev);
1388 set_gadget_data(gadget, NULL);
1389 composite = NULL;
1390}
1391
1392static u8 override_id(struct usb_composite_dev *cdev, u8 *desc)
1393{
1394 if (!*desc) {
1395 int ret = usb_string_id(cdev);
1396 if (unlikely(ret < 0))
1397 WARNING(cdev, "failed to override string ID\n");
1398 else
1399 *desc = ret;
1400 }
1401
1402 return *desc;
1403}
1404
1405static int composite_bind(struct usb_gadget *gadget)
1406{
1407 struct usb_composite_dev *cdev;
1408 int status = -ENOMEM;
1409
1410 cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
1411 if (!cdev)
1412 return status;
1413
1414 spin_lock_init(&cdev->lock);
1415 cdev->gadget = gadget;
1416 set_gadget_data(gadget, cdev);
1417 INIT_LIST_HEAD(&cdev->configs);
1418
1419 /* preallocate control response and buffer */
1420 cdev->req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL);
1421 if (!cdev->req)
1422 goto fail;
1423 cdev->req->buf = kmalloc(USB_BUFSIZ, GFP_KERNEL);
1424 if (!cdev->req->buf)
1425 goto fail;
1426 cdev->req->complete = composite_setup_complete;
1427 gadget->ep0->driver_data = cdev;
1428
1429 cdev->bufsiz = USB_BUFSIZ;
1430 cdev->driver = composite;
1431
1432 /*
1433 * As per USB compliance update, a device that is actively drawing
1434 * more than 100mA from USB must report itself as bus-powered in
1435 * the GetStatus(DEVICE) call.
1436 */
1437 if (CONFIG_USB_GADGET_VBUS_DRAW <= USB_SELF_POWER_VBUS_MAX_DRAW)
1438 usb_gadget_set_selfpowered(gadget);
1439
1440 /* interface and string IDs start at zero via kzalloc.
1441 * we force endpoints to start unassigned; few controller
1442 * drivers will zero ep->driver_data.
1443 */
1444 usb_ep_autoconfig_reset(cdev->gadget);
1445
1446 /* composite gadget needs to assign strings for whole device (like
1447 * serial number), register function drivers, potentially update
1448 * power state and consumption, etc
1449 */
1450 status = composite_gadget_bind(cdev);
1451 if (status < 0)
1452 goto fail;
1453
1454 cdev->desc = *composite->dev;
1455
1456 /* standardized runtime overrides for device ID data */
1457 if (idVendor)
1458 cdev->desc.idVendor = cpu_to_le16(idVendor);
1459 if (idProduct)
1460 cdev->desc.idProduct = cpu_to_le16(idProduct);
1461 if (bcdDevice)
1462 cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
1463
1464 /* string overrides */
1465 if (iManufacturer || !cdev->desc.iManufacturer) {
1466 if (!iManufacturer && !composite->iManufacturer &&
1467 !*composite_manufacturer)
1468 snprintf(composite_manufacturer,
1469 sizeof composite_manufacturer,
1470 "%s %s with %s",
1471 init_utsname()->sysname,
1472 init_utsname()->release,
1473 gadget->name);
1474
1475 cdev->manufacturer_override =
1476 override_id(cdev, &cdev->desc.iManufacturer);
1477 }
1478
1479 if (iProduct || (!cdev->desc.iProduct && composite->iProduct))
1480 cdev->product_override =
1481 override_id(cdev, &cdev->desc.iProduct);
1482
1483 if (iSerialNumber)
1484 cdev->serial_override =
1485 override_id(cdev, &cdev->desc.iSerialNumber);
1486
1487 /* has userspace failed to provide a serial number? */
1488 if (composite->needs_serial && !cdev->desc.iSerialNumber)
1489 WARNING(cdev, "userspace failed to provide iSerialNumber\n");
1490
1491 /* finish up */
1492 status = device_create_file(&gadget->dev, &dev_attr_suspended);
1493 if (status)
1494 goto fail;
1495
1496 INFO(cdev, "%s ready\n", composite->name);
1497 return 0;
1498
1499fail:
1500 composite_unbind(gadget);
1501 return status;
1502}
1503
1504/*-------------------------------------------------------------------------*/
1505
1506static void
1507composite_suspend(struct usb_gadget *gadget)
1508{
1509 struct usb_composite_dev *cdev = get_gadget_data(gadget);
1510 struct usb_function *f;
1511
1512 /* REVISIT: should we have config level
1513 * suspend/resume callbacks?
1514 */
1515 DBG(cdev, "suspend\n");
1516 if (cdev->config) {
1517 list_for_each_entry(f, &cdev->config->functions, list) {
1518 if (f->suspend)
1519 f->suspend(f);
1520 }
1521 }
1522 if (composite->suspend)
1523 composite->suspend(cdev);
1524
1525 cdev->suspended = 1;
1526
1527 usb_gadget_vbus_draw(gadget, 2);
1528}
1529
1530static void
1531composite_resume(struct usb_gadget *gadget)
1532{
1533 struct usb_composite_dev *cdev = get_gadget_data(gadget);
1534 struct usb_function *f;
1535 u8 maxpower;
1536
1537 /* REVISIT: should we have config level
1538 * suspend/resume callbacks?
1539 */
1540 DBG(cdev, "resume\n");
1541 if (composite->resume)
1542 composite->resume(cdev);
1543 if (cdev->config) {
1544 list_for_each_entry(f, &cdev->config->functions, list) {
1545 if (f->resume)
1546 f->resume(f);
1547 }
1548
1549 maxpower = cdev->config->bMaxPower;
1550
1551 usb_gadget_vbus_draw(gadget, maxpower ?
1552 (2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW);
1553 }
1554
1555 cdev->suspended = 0;
1556}
1557
1558/*-------------------------------------------------------------------------*/
1559
1560static struct usb_gadget_driver composite_driver = {
1561#ifdef CONFIG_USB_GADGET_SUPERSPEED
1562 .speed = USB_SPEED_SUPER,
1563#else
1564 .speed = USB_SPEED_HIGH,
1565#endif
1566
1567 .unbind = composite_unbind,
1568
1569 .setup = composite_setup,
1570 .disconnect = composite_disconnect,
1571
1572 .suspend = composite_suspend,
1573 .resume = composite_resume,
1574
1575 .driver = {
1576 .owner = THIS_MODULE,
1577 },
1578};
1579
1580/**
1581 * usb_composite_probe() - register a composite driver
1582 * @driver: the driver to register
1583 * @bind: the callback used to allocate resources that are shared across the
1584 * whole device, such as string IDs, and add its configurations using
1585 * @usb_add_config(). This may fail by returning a negative errno
1586 * value; it should return zero on successful initialization.
1587 * Context: single threaded during gadget setup
1588 *
1589 * This function is used to register drivers using the composite driver
1590 * framework. The return value is zero, or a negative errno value.
1591 * Those values normally come from the driver's @bind method, which does
1592 * all the work of setting up the driver to match the hardware.
1593 *
1594 * On successful return, the gadget is ready to respond to requests from
1595 * the host, unless one of its components invokes usb_gadget_disconnect()
1596 * while it was binding. That would usually be done in order to wait for
1597 * some userspace participation.
1598 */
1599int usb_composite_probe(struct usb_composite_driver *driver,
1600 int (*bind)(struct usb_composite_dev *cdev))
1601{
1602 if (!driver || !driver->dev || !bind || composite)
1603 return -EINVAL;
1604
1605 if (!driver->name)
1606 driver->name = "composite";
1607 if (!driver->iProduct)
1608 driver->iProduct = driver->name;
1609 composite_driver.function = (char *) driver->name;
1610 composite_driver.driver.name = driver->name;
1611 composite_driver.speed = min((u8)composite_driver.speed,
1612 (u8)driver->max_speed);
1613 composite = driver;
1614 composite_gadget_bind = bind;
1615
1616 return usb_gadget_probe_driver(&composite_driver, composite_bind);
1617}
1618
1619/**
1620 * usb_composite_unregister() - unregister a composite driver
1621 * @driver: the driver to unregister
1622 *
1623 * This function is used to unregister drivers using the composite
1624 * driver framework.
1625 */
1626void usb_composite_unregister(struct usb_composite_driver *driver)
1627{
1628 if (composite != driver)
1629 return;
1630 usb_gadget_unregister_driver(&composite_driver);
1631}
1632
1633/**
1634 * usb_composite_setup_continue() - Continue with the control transfer
1635 * @cdev: the composite device who's control transfer was kept waiting
1636 *
1637 * This function must be called by the USB function driver to continue
1638 * with the control transfer's data/status stage in case it had requested to
1639 * delay the data/status stages. A USB function's setup handler (e.g. set_alt())
1640 * can request the composite framework to delay the setup request's data/status
1641 * stages by returning USB_GADGET_DELAYED_STATUS.
1642 */
1643void usb_composite_setup_continue(struct usb_composite_dev *cdev)
1644{
1645 int value;
1646 struct usb_request *req = cdev->req;
1647 unsigned long flags;
1648
1649 DBG(cdev, "%s\n", __func__);
1650 spin_lock_irqsave(&cdev->lock, flags);
1651
1652 if (cdev->delayed_status == 0) {
1653 WARN(cdev, "%s: Unexpected call\n", __func__);
1654
1655 } else if (--cdev->delayed_status == 0) {
1656 DBG(cdev, "%s: Completing delayed status\n", __func__);
1657 req->length = 0;
1658 value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
1659 if (value < 0) {
1660 DBG(cdev, "ep_queue --> %d\n", value);
1661 req->status = 0;
1662 composite_setup_complete(cdev->gadget->ep0, req);
1663 }
1664 }
1665
1666 spin_unlock_irqrestore(&cdev->lock, flags);
1667}
1668