Loading...
Note: File does not exist in v3.1.
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * RDA8810PL serial device driver
4 *
5 * Copyright RDA Microelectronics Company Limited
6 * Copyright (c) 2017 Andreas Färber
7 * Copyright (c) 2018 Manivannan Sadhasivam
8 */
9
10#include <linux/clk.h>
11#include <linux/console.h>
12#include <linux/delay.h>
13#include <linux/io.h>
14#include <linux/module.h>
15#include <linux/of.h>
16#include <linux/platform_device.h>
17#include <linux/serial.h>
18#include <linux/serial_core.h>
19#include <linux/tty.h>
20#include <linux/tty_flip.h>
21
22#define RDA_UART_PORT_NUM 3
23#define RDA_UART_DEV_NAME "ttyRDA"
24
25#define RDA_UART_CTRL 0x00
26#define RDA_UART_STATUS 0x04
27#define RDA_UART_RXTX_BUFFER 0x08
28#define RDA_UART_IRQ_MASK 0x0c
29#define RDA_UART_IRQ_CAUSE 0x10
30#define RDA_UART_IRQ_TRIGGERS 0x14
31#define RDA_UART_CMD_SET 0x18
32#define RDA_UART_CMD_CLR 0x1c
33
34/* UART_CTRL Bits */
35#define RDA_UART_ENABLE BIT(0)
36#define RDA_UART_DBITS_8 BIT(1)
37#define RDA_UART_TX_SBITS_2 BIT(2)
38#define RDA_UART_PARITY_EN BIT(3)
39#define RDA_UART_PARITY(x) (((x) & 0x3) << 4)
40#define RDA_UART_PARITY_ODD RDA_UART_PARITY(0)
41#define RDA_UART_PARITY_EVEN RDA_UART_PARITY(1)
42#define RDA_UART_PARITY_SPACE RDA_UART_PARITY(2)
43#define RDA_UART_PARITY_MARK RDA_UART_PARITY(3)
44#define RDA_UART_DIV_MODE BIT(20)
45#define RDA_UART_IRDA_EN BIT(21)
46#define RDA_UART_DMA_EN BIT(22)
47#define RDA_UART_FLOW_CNT_EN BIT(23)
48#define RDA_UART_LOOP_BACK_EN BIT(24)
49#define RDA_UART_RX_LOCK_ERR BIT(25)
50#define RDA_UART_RX_BREAK_LEN(x) (((x) & 0xf) << 28)
51
52/* UART_STATUS Bits */
53#define RDA_UART_RX_FIFO(x) (((x) & 0x7f) << 0)
54#define RDA_UART_RX_FIFO_MASK (0x7f << 0)
55#define RDA_UART_TX_FIFO(x) (((x) & 0x1f) << 8)
56#define RDA_UART_TX_FIFO_MASK (0x1f << 8)
57#define RDA_UART_TX_ACTIVE BIT(14)
58#define RDA_UART_RX_ACTIVE BIT(15)
59#define RDA_UART_RX_OVERFLOW_ERR BIT(16)
60#define RDA_UART_TX_OVERFLOW_ERR BIT(17)
61#define RDA_UART_RX_PARITY_ERR BIT(18)
62#define RDA_UART_RX_FRAMING_ERR BIT(19)
63#define RDA_UART_RX_BREAK_INT BIT(20)
64#define RDA_UART_DCTS BIT(24)
65#define RDA_UART_CTS BIT(25)
66#define RDA_UART_DTR BIT(28)
67#define RDA_UART_CLK_ENABLED BIT(31)
68
69/* UART_RXTX_BUFFER Bits */
70#define RDA_UART_RX_DATA(x) (((x) & 0xff) << 0)
71#define RDA_UART_TX_DATA(x) (((x) & 0xff) << 0)
72
73/* UART_IRQ_MASK Bits */
74#define RDA_UART_TX_MODEM_STATUS BIT(0)
75#define RDA_UART_RX_DATA_AVAILABLE BIT(1)
76#define RDA_UART_TX_DATA_NEEDED BIT(2)
77#define RDA_UART_RX_TIMEOUT BIT(3)
78#define RDA_UART_RX_LINE_ERR BIT(4)
79#define RDA_UART_TX_DMA_DONE BIT(5)
80#define RDA_UART_RX_DMA_DONE BIT(6)
81#define RDA_UART_RX_DMA_TIMEOUT BIT(7)
82#define RDA_UART_DTR_RISE BIT(8)
83#define RDA_UART_DTR_FALL BIT(9)
84
85/* UART_IRQ_CAUSE Bits */
86#define RDA_UART_TX_MODEM_STATUS_U BIT(16)
87#define RDA_UART_RX_DATA_AVAILABLE_U BIT(17)
88#define RDA_UART_TX_DATA_NEEDED_U BIT(18)
89#define RDA_UART_RX_TIMEOUT_U BIT(19)
90#define RDA_UART_RX_LINE_ERR_U BIT(20)
91#define RDA_UART_TX_DMA_DONE_U BIT(21)
92#define RDA_UART_RX_DMA_DONE_U BIT(22)
93#define RDA_UART_RX_DMA_TIMEOUT_U BIT(23)
94#define RDA_UART_DTR_RISE_U BIT(24)
95#define RDA_UART_DTR_FALL_U BIT(25)
96
97/* UART_TRIGGERS Bits */
98#define RDA_UART_RX_TRIGGER(x) (((x) & 0x1f) << 0)
99#define RDA_UART_TX_TRIGGER(x) (((x) & 0xf) << 8)
100#define RDA_UART_AFC_LEVEL(x) (((x) & 0x1f) << 16)
101
102/* UART_CMD_SET Bits */
103#define RDA_UART_RI BIT(0)
104#define RDA_UART_DCD BIT(1)
105#define RDA_UART_DSR BIT(2)
106#define RDA_UART_TX_BREAK_CONTROL BIT(3)
107#define RDA_UART_TX_FINISH_N_WAIT BIT(4)
108#define RDA_UART_RTS BIT(5)
109#define RDA_UART_RX_FIFO_RESET BIT(6)
110#define RDA_UART_TX_FIFO_RESET BIT(7)
111
112#define RDA_UART_TX_FIFO_SIZE 16
113
114static struct uart_driver rda_uart_driver;
115
116struct rda_uart_port {
117 struct uart_port port;
118 struct clk *clk;
119};
120
121#define to_rda_uart_port(port) container_of(port, struct rda_uart_port, port)
122
123static struct rda_uart_port *rda_uart_ports[RDA_UART_PORT_NUM];
124
125static inline void rda_uart_write(struct uart_port *port, u32 val,
126 unsigned int off)
127{
128 writel(val, port->membase + off);
129}
130
131static inline u32 rda_uart_read(struct uart_port *port, unsigned int off)
132{
133 return readl(port->membase + off);
134}
135
136static unsigned int rda_uart_tx_empty(struct uart_port *port)
137{
138 unsigned long flags;
139 unsigned int ret;
140 u32 val;
141
142 uart_port_lock_irqsave(port, &flags);
143
144 val = rda_uart_read(port, RDA_UART_STATUS);
145 ret = (val & RDA_UART_TX_FIFO_MASK) ? TIOCSER_TEMT : 0;
146
147 uart_port_unlock_irqrestore(port, flags);
148
149 return ret;
150}
151
152static unsigned int rda_uart_get_mctrl(struct uart_port *port)
153{
154 unsigned int mctrl = 0;
155 u32 cmd_set, status;
156
157 cmd_set = rda_uart_read(port, RDA_UART_CMD_SET);
158 status = rda_uart_read(port, RDA_UART_STATUS);
159 if (cmd_set & RDA_UART_RTS)
160 mctrl |= TIOCM_RTS;
161 if (!(status & RDA_UART_CTS))
162 mctrl |= TIOCM_CTS;
163
164 return mctrl;
165}
166
167static void rda_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
168{
169 u32 val;
170
171 if (mctrl & TIOCM_RTS) {
172 val = rda_uart_read(port, RDA_UART_CMD_SET);
173 rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_SET);
174 } else {
175 /* Clear RTS to stop to receive. */
176 val = rda_uart_read(port, RDA_UART_CMD_CLR);
177 rda_uart_write(port, (val | RDA_UART_RTS), RDA_UART_CMD_CLR);
178 }
179
180 val = rda_uart_read(port, RDA_UART_CTRL);
181
182 if (mctrl & TIOCM_LOOP)
183 val |= RDA_UART_LOOP_BACK_EN;
184 else
185 val &= ~RDA_UART_LOOP_BACK_EN;
186
187 rda_uart_write(port, val, RDA_UART_CTRL);
188}
189
190static void rda_uart_stop_tx(struct uart_port *port)
191{
192 u32 val;
193
194 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
195 val &= ~RDA_UART_TX_DATA_NEEDED;
196 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
197
198 val = rda_uart_read(port, RDA_UART_CMD_SET);
199 val |= RDA_UART_TX_FIFO_RESET;
200 rda_uart_write(port, val, RDA_UART_CMD_SET);
201}
202
203static void rda_uart_stop_rx(struct uart_port *port)
204{
205 u32 val;
206
207 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
208 val &= ~(RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT);
209 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
210
211 /* Read Rx buffer before reset to avoid Rx timeout interrupt */
212 val = rda_uart_read(port, RDA_UART_RXTX_BUFFER);
213
214 val = rda_uart_read(port, RDA_UART_CMD_SET);
215 val |= RDA_UART_RX_FIFO_RESET;
216 rda_uart_write(port, val, RDA_UART_CMD_SET);
217}
218
219static void rda_uart_start_tx(struct uart_port *port)
220{
221 u32 val;
222
223 if (uart_tx_stopped(port)) {
224 rda_uart_stop_tx(port);
225 return;
226 }
227
228 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
229 val |= RDA_UART_TX_DATA_NEEDED;
230 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
231}
232
233static void rda_uart_change_baudrate(struct rda_uart_port *rda_port,
234 unsigned long baud)
235{
236 clk_set_rate(rda_port->clk, baud * 8);
237}
238
239static void rda_uart_set_termios(struct uart_port *port,
240 struct ktermios *termios,
241 const struct ktermios *old)
242{
243 struct rda_uart_port *rda_port = to_rda_uart_port(port);
244 unsigned long flags;
245 unsigned int ctrl, cmd_set, cmd_clr, triggers;
246 unsigned int baud;
247 u32 irq_mask;
248
249 uart_port_lock_irqsave(port, &flags);
250
251 baud = uart_get_baud_rate(port, termios, old, 9600, port->uartclk / 4);
252 rda_uart_change_baudrate(rda_port, baud);
253
254 ctrl = rda_uart_read(port, RDA_UART_CTRL);
255 cmd_set = rda_uart_read(port, RDA_UART_CMD_SET);
256 cmd_clr = rda_uart_read(port, RDA_UART_CMD_CLR);
257
258 switch (termios->c_cflag & CSIZE) {
259 case CS5:
260 case CS6:
261 dev_warn(port->dev, "bit size not supported, using 7 bits\n");
262 fallthrough;
263 case CS7:
264 ctrl &= ~RDA_UART_DBITS_8;
265 termios->c_cflag &= ~CSIZE;
266 termios->c_cflag |= CS7;
267 break;
268 default:
269 ctrl |= RDA_UART_DBITS_8;
270 break;
271 }
272
273 /* stop bits */
274 if (termios->c_cflag & CSTOPB)
275 ctrl |= RDA_UART_TX_SBITS_2;
276 else
277 ctrl &= ~RDA_UART_TX_SBITS_2;
278
279 /* parity check */
280 if (termios->c_cflag & PARENB) {
281 ctrl |= RDA_UART_PARITY_EN;
282
283 /* Mark or Space parity */
284 if (termios->c_cflag & CMSPAR) {
285 if (termios->c_cflag & PARODD)
286 ctrl |= RDA_UART_PARITY_MARK;
287 else
288 ctrl |= RDA_UART_PARITY_SPACE;
289 } else if (termios->c_cflag & PARODD) {
290 ctrl |= RDA_UART_PARITY_ODD;
291 } else {
292 ctrl |= RDA_UART_PARITY_EVEN;
293 }
294 } else {
295 ctrl &= ~RDA_UART_PARITY_EN;
296 }
297
298 /* Hardware handshake (RTS/CTS) */
299 if (termios->c_cflag & CRTSCTS) {
300 ctrl |= RDA_UART_FLOW_CNT_EN;
301 cmd_set |= RDA_UART_RTS;
302 } else {
303 ctrl &= ~RDA_UART_FLOW_CNT_EN;
304 cmd_clr |= RDA_UART_RTS;
305 }
306
307 ctrl |= RDA_UART_ENABLE;
308 ctrl &= ~RDA_UART_DMA_EN;
309
310 triggers = (RDA_UART_AFC_LEVEL(20) | RDA_UART_RX_TRIGGER(16));
311 irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
312 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
313
314 rda_uart_write(port, triggers, RDA_UART_IRQ_TRIGGERS);
315 rda_uart_write(port, ctrl, RDA_UART_CTRL);
316 rda_uart_write(port, cmd_set, RDA_UART_CMD_SET);
317 rda_uart_write(port, cmd_clr, RDA_UART_CMD_CLR);
318
319 rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK);
320
321 /* Don't rewrite B0 */
322 if (tty_termios_baud_rate(termios))
323 tty_termios_encode_baud_rate(termios, baud, baud);
324
325 /* update the per-port timeout */
326 uart_update_timeout(port, termios->c_cflag, baud);
327
328 uart_port_unlock_irqrestore(port, flags);
329}
330
331static void rda_uart_send_chars(struct uart_port *port)
332{
333 struct circ_buf *xmit = &port->state->xmit;
334 unsigned int ch;
335 u32 val;
336
337 if (uart_tx_stopped(port))
338 return;
339
340 if (port->x_char) {
341 while (!(rda_uart_read(port, RDA_UART_STATUS) &
342 RDA_UART_TX_FIFO_MASK))
343 cpu_relax();
344
345 rda_uart_write(port, port->x_char, RDA_UART_RXTX_BUFFER);
346 port->icount.tx++;
347 port->x_char = 0;
348 }
349
350 while (rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK) {
351 if (uart_circ_empty(xmit))
352 break;
353
354 ch = xmit->buf[xmit->tail];
355 rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
356 uart_xmit_advance(port, 1);
357 }
358
359 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
360 uart_write_wakeup(port);
361
362 if (!uart_circ_empty(xmit)) {
363 /* Re-enable Tx FIFO interrupt */
364 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
365 val |= RDA_UART_TX_DATA_NEEDED;
366 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
367 }
368}
369
370static void rda_uart_receive_chars(struct uart_port *port)
371{
372 u32 status, val;
373
374 status = rda_uart_read(port, RDA_UART_STATUS);
375 while ((status & RDA_UART_RX_FIFO_MASK)) {
376 char flag = TTY_NORMAL;
377
378 if (status & RDA_UART_RX_PARITY_ERR) {
379 port->icount.parity++;
380 flag = TTY_PARITY;
381 }
382
383 if (status & RDA_UART_RX_FRAMING_ERR) {
384 port->icount.frame++;
385 flag = TTY_FRAME;
386 }
387
388 if (status & RDA_UART_RX_OVERFLOW_ERR) {
389 port->icount.overrun++;
390 flag = TTY_OVERRUN;
391 }
392
393 val = rda_uart_read(port, RDA_UART_RXTX_BUFFER);
394 val &= 0xff;
395
396 port->icount.rx++;
397 tty_insert_flip_char(&port->state->port, val, flag);
398
399 status = rda_uart_read(port, RDA_UART_STATUS);
400 }
401
402 tty_flip_buffer_push(&port->state->port);
403}
404
405static irqreturn_t rda_interrupt(int irq, void *dev_id)
406{
407 struct uart_port *port = dev_id;
408 unsigned long flags;
409 u32 val, irq_mask;
410
411 uart_port_lock_irqsave(port, &flags);
412
413 /* Clear IRQ cause */
414 val = rda_uart_read(port, RDA_UART_IRQ_CAUSE);
415 rda_uart_write(port, val, RDA_UART_IRQ_CAUSE);
416
417 if (val & (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT))
418 rda_uart_receive_chars(port);
419
420 if (val & (RDA_UART_TX_DATA_NEEDED)) {
421 irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
422 irq_mask &= ~RDA_UART_TX_DATA_NEEDED;
423 rda_uart_write(port, irq_mask, RDA_UART_IRQ_MASK);
424
425 rda_uart_send_chars(port);
426 }
427
428 uart_port_unlock_irqrestore(port, flags);
429
430 return IRQ_HANDLED;
431}
432
433static int rda_uart_startup(struct uart_port *port)
434{
435 unsigned long flags;
436 int ret;
437 u32 val;
438
439 uart_port_lock_irqsave(port, &flags);
440 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
441 uart_port_unlock_irqrestore(port, flags);
442
443 ret = request_irq(port->irq, rda_interrupt, IRQF_NO_SUSPEND,
444 "rda-uart", port);
445 if (ret)
446 return ret;
447
448 uart_port_lock_irqsave(port, &flags);
449
450 val = rda_uart_read(port, RDA_UART_CTRL);
451 val |= RDA_UART_ENABLE;
452 rda_uart_write(port, val, RDA_UART_CTRL);
453
454 /* enable rx interrupt */
455 val = rda_uart_read(port, RDA_UART_IRQ_MASK);
456 val |= (RDA_UART_RX_DATA_AVAILABLE | RDA_UART_RX_TIMEOUT);
457 rda_uart_write(port, val, RDA_UART_IRQ_MASK);
458
459 uart_port_unlock_irqrestore(port, flags);
460
461 return 0;
462}
463
464static void rda_uart_shutdown(struct uart_port *port)
465{
466 unsigned long flags;
467 u32 val;
468
469 uart_port_lock_irqsave(port, &flags);
470
471 rda_uart_stop_tx(port);
472 rda_uart_stop_rx(port);
473
474 val = rda_uart_read(port, RDA_UART_CTRL);
475 val &= ~RDA_UART_ENABLE;
476 rda_uart_write(port, val, RDA_UART_CTRL);
477
478 uart_port_unlock_irqrestore(port, flags);
479}
480
481static const char *rda_uart_type(struct uart_port *port)
482{
483 return (port->type == PORT_RDA) ? "rda-uart" : NULL;
484}
485
486static int rda_uart_request_port(struct uart_port *port)
487{
488 struct platform_device *pdev = to_platform_device(port->dev);
489 struct resource *res;
490
491 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
492 if (!res)
493 return -ENXIO;
494
495 if (!devm_request_mem_region(port->dev, port->mapbase,
496 resource_size(res), dev_name(port->dev)))
497 return -EBUSY;
498
499 if (port->flags & UPF_IOREMAP) {
500 port->membase = devm_ioremap(port->dev, port->mapbase,
501 resource_size(res));
502 if (!port->membase)
503 return -EBUSY;
504 }
505
506 return 0;
507}
508
509static void rda_uart_config_port(struct uart_port *port, int flags)
510{
511 unsigned long irq_flags;
512
513 if (flags & UART_CONFIG_TYPE) {
514 port->type = PORT_RDA;
515 rda_uart_request_port(port);
516 }
517
518 uart_port_lock_irqsave(port, &irq_flags);
519
520 /* Clear mask, so no surprise interrupts. */
521 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
522
523 /* Clear status register */
524 rda_uart_write(port, 0, RDA_UART_STATUS);
525
526 uart_port_unlock_irqrestore(port, irq_flags);
527}
528
529static void rda_uart_release_port(struct uart_port *port)
530{
531 struct platform_device *pdev = to_platform_device(port->dev);
532 struct resource *res;
533
534 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
535 if (!res)
536 return;
537
538 if (port->flags & UPF_IOREMAP) {
539 devm_release_mem_region(port->dev, port->mapbase,
540 resource_size(res));
541 devm_iounmap(port->dev, port->membase);
542 port->membase = NULL;
543 }
544}
545
546static int rda_uart_verify_port(struct uart_port *port,
547 struct serial_struct *ser)
548{
549 if (port->type != PORT_RDA)
550 return -EINVAL;
551
552 if (port->irq != ser->irq)
553 return -EINVAL;
554
555 return 0;
556}
557
558static const struct uart_ops rda_uart_ops = {
559 .tx_empty = rda_uart_tx_empty,
560 .get_mctrl = rda_uart_get_mctrl,
561 .set_mctrl = rda_uart_set_mctrl,
562 .start_tx = rda_uart_start_tx,
563 .stop_tx = rda_uart_stop_tx,
564 .stop_rx = rda_uart_stop_rx,
565 .startup = rda_uart_startup,
566 .shutdown = rda_uart_shutdown,
567 .set_termios = rda_uart_set_termios,
568 .type = rda_uart_type,
569 .request_port = rda_uart_request_port,
570 .release_port = rda_uart_release_port,
571 .config_port = rda_uart_config_port,
572 .verify_port = rda_uart_verify_port,
573};
574
575#ifdef CONFIG_SERIAL_RDA_CONSOLE
576
577static void rda_console_putchar(struct uart_port *port, unsigned char ch)
578{
579 if (!port->membase)
580 return;
581
582 while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK))
583 cpu_relax();
584
585 rda_uart_write(port, ch, RDA_UART_RXTX_BUFFER);
586}
587
588static void rda_uart_port_write(struct uart_port *port, const char *s,
589 u_int count)
590{
591 u32 old_irq_mask;
592 unsigned long flags;
593 int locked;
594
595 local_irq_save(flags);
596
597 if (port->sysrq) {
598 locked = 0;
599 } else if (oops_in_progress) {
600 locked = uart_port_trylock(port);
601 } else {
602 uart_port_lock(port);
603 locked = 1;
604 }
605
606 old_irq_mask = rda_uart_read(port, RDA_UART_IRQ_MASK);
607 rda_uart_write(port, 0, RDA_UART_IRQ_MASK);
608
609 uart_console_write(port, s, count, rda_console_putchar);
610
611 /* wait until all contents have been sent out */
612 while (!(rda_uart_read(port, RDA_UART_STATUS) & RDA_UART_TX_FIFO_MASK))
613 cpu_relax();
614
615 rda_uart_write(port, old_irq_mask, RDA_UART_IRQ_MASK);
616
617 if (locked)
618 uart_port_unlock(port);
619
620 local_irq_restore(flags);
621}
622
623static void rda_uart_console_write(struct console *co, const char *s,
624 u_int count)
625{
626 struct rda_uart_port *rda_port;
627
628 rda_port = rda_uart_ports[co->index];
629 if (!rda_port)
630 return;
631
632 rda_uart_port_write(&rda_port->port, s, count);
633}
634
635static int rda_uart_console_setup(struct console *co, char *options)
636{
637 struct rda_uart_port *rda_port;
638 int baud = 921600;
639 int bits = 8;
640 int parity = 'n';
641 int flow = 'n';
642
643 if (co->index < 0 || co->index >= RDA_UART_PORT_NUM)
644 return -EINVAL;
645
646 rda_port = rda_uart_ports[co->index];
647 if (!rda_port || !rda_port->port.membase)
648 return -ENODEV;
649
650 if (options)
651 uart_parse_options(options, &baud, &parity, &bits, &flow);
652
653 return uart_set_options(&rda_port->port, co, baud, parity, bits, flow);
654}
655
656static struct console rda_uart_console = {
657 .name = RDA_UART_DEV_NAME,
658 .write = rda_uart_console_write,
659 .device = uart_console_device,
660 .setup = rda_uart_console_setup,
661 .flags = CON_PRINTBUFFER,
662 .index = -1,
663 .data = &rda_uart_driver,
664};
665
666static int __init rda_uart_console_init(void)
667{
668 register_console(&rda_uart_console);
669
670 return 0;
671}
672console_initcall(rda_uart_console_init);
673
674static void rda_uart_early_console_write(struct console *co,
675 const char *s,
676 u_int count)
677{
678 struct earlycon_device *dev = co->data;
679
680 rda_uart_port_write(&dev->port, s, count);
681}
682
683static int __init
684rda_uart_early_console_setup(struct earlycon_device *device, const char *opt)
685{
686 if (!device->port.membase)
687 return -ENODEV;
688
689 device->con->write = rda_uart_early_console_write;
690
691 return 0;
692}
693
694OF_EARLYCON_DECLARE(rda, "rda,8810pl-uart",
695 rda_uart_early_console_setup);
696
697#define RDA_UART_CONSOLE (&rda_uart_console)
698#else
699#define RDA_UART_CONSOLE NULL
700#endif /* CONFIG_SERIAL_RDA_CONSOLE */
701
702static struct uart_driver rda_uart_driver = {
703 .owner = THIS_MODULE,
704 .driver_name = "rda-uart",
705 .dev_name = RDA_UART_DEV_NAME,
706 .nr = RDA_UART_PORT_NUM,
707 .cons = RDA_UART_CONSOLE,
708};
709
710static const struct of_device_id rda_uart_dt_matches[] = {
711 { .compatible = "rda,8810pl-uart" },
712 { }
713};
714MODULE_DEVICE_TABLE(of, rda_uart_dt_matches);
715
716static int rda_uart_probe(struct platform_device *pdev)
717{
718 struct resource *res_mem;
719 struct rda_uart_port *rda_port;
720 int ret, irq;
721
722 if (pdev->dev.of_node)
723 pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
724
725 if (pdev->id < 0 || pdev->id >= RDA_UART_PORT_NUM) {
726 dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
727 return -EINVAL;
728 }
729
730 res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
731 if (!res_mem) {
732 dev_err(&pdev->dev, "could not get mem\n");
733 return -ENODEV;
734 }
735
736 irq = platform_get_irq(pdev, 0);
737 if (irq < 0)
738 return irq;
739
740 if (rda_uart_ports[pdev->id]) {
741 dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
742 return -EBUSY;
743 }
744
745 rda_port = devm_kzalloc(&pdev->dev, sizeof(*rda_port), GFP_KERNEL);
746 if (!rda_port)
747 return -ENOMEM;
748
749 rda_port->clk = devm_clk_get(&pdev->dev, NULL);
750 if (IS_ERR(rda_port->clk)) {
751 dev_err(&pdev->dev, "could not get clk\n");
752 return PTR_ERR(rda_port->clk);
753 }
754
755 rda_port->port.dev = &pdev->dev;
756 rda_port->port.regshift = 0;
757 rda_port->port.line = pdev->id;
758 rda_port->port.type = PORT_RDA;
759 rda_port->port.iotype = UPIO_MEM;
760 rda_port->port.mapbase = res_mem->start;
761 rda_port->port.irq = irq;
762 rda_port->port.uartclk = clk_get_rate(rda_port->clk);
763 if (rda_port->port.uartclk == 0) {
764 dev_err(&pdev->dev, "clock rate is zero\n");
765 return -EINVAL;
766 }
767 rda_port->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP |
768 UPF_LOW_LATENCY;
769 rda_port->port.x_char = 0;
770 rda_port->port.fifosize = RDA_UART_TX_FIFO_SIZE;
771 rda_port->port.ops = &rda_uart_ops;
772
773 rda_uart_ports[pdev->id] = rda_port;
774 platform_set_drvdata(pdev, rda_port);
775
776 ret = uart_add_one_port(&rda_uart_driver, &rda_port->port);
777 if (ret)
778 rda_uart_ports[pdev->id] = NULL;
779
780 return ret;
781}
782
783static void rda_uart_remove(struct platform_device *pdev)
784{
785 struct rda_uart_port *rda_port = platform_get_drvdata(pdev);
786
787 uart_remove_one_port(&rda_uart_driver, &rda_port->port);
788 rda_uart_ports[pdev->id] = NULL;
789}
790
791static struct platform_driver rda_uart_platform_driver = {
792 .probe = rda_uart_probe,
793 .remove_new = rda_uart_remove,
794 .driver = {
795 .name = "rda-uart",
796 .of_match_table = rda_uart_dt_matches,
797 },
798};
799
800static int __init rda_uart_init(void)
801{
802 int ret;
803
804 ret = uart_register_driver(&rda_uart_driver);
805 if (ret)
806 return ret;
807
808 ret = platform_driver_register(&rda_uart_platform_driver);
809 if (ret)
810 uart_unregister_driver(&rda_uart_driver);
811
812 return ret;
813}
814
815static void __exit rda_uart_exit(void)
816{
817 platform_driver_unregister(&rda_uart_platform_driver);
818 uart_unregister_driver(&rda_uart_driver);
819}
820
821module_init(rda_uart_init);
822module_exit(rda_uart_exit);
823
824MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
825MODULE_DESCRIPTION("RDA8810PL serial device driver");
826MODULE_LICENSE("GPL");