Loading...
Note: File does not exist in v6.8.
1/*
2
3 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
4
5 Maintained by Jeff Garzik <jgarzik@pobox.com>
6 Copyright 2000-2002 Jeff Garzik
7
8 Much code comes from Donald Becker's rtl8139.c driver,
9 versions 1.13 and older. This driver was originally based
10 on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
11
12 -----<snip>-----
13
14 Written 1997-2001 by Donald Becker.
15 This software may be used and distributed according to the
16 terms of the GNU General Public License (GPL), incorporated
17 herein by reference. Drivers based on or derived from this
18 code fall under the GPL and must retain the authorship,
19 copyright and license notice. This file is not a complete
20 program and may only be used when the entire operating
21 system is licensed under the GPL.
22
23 This driver is for boards based on the RTL8129 and RTL8139
24 PCI ethernet chips.
25
26 The author may be reached as becker@scyld.com, or C/O Scyld
27 Computing Corporation 410 Severn Ave., Suite 210 Annapolis
28 MD 21403
29
30 Support and updates available at
31 http://www.scyld.com/network/rtl8139.html
32
33 Twister-tuning table provided by Kinston
34 <shangh@realtek.com.tw>.
35
36 -----<snip>-----
37
38 This software may be used and distributed according to the terms
39 of the GNU General Public License, incorporated herein by reference.
40
41 Contributors:
42
43 Donald Becker - he wrote the original driver, kudos to him!
44 (but please don't e-mail him for support, this isn't his driver)
45
46 Tigran Aivazian - bug fixes, skbuff free cleanup
47
48 Martin Mares - suggestions for PCI cleanup
49
50 David S. Miller - PCI DMA and softnet updates
51
52 Ernst Gill - fixes ported from BSD driver
53
54 Daniel Kobras - identified specific locations of
55 posted MMIO write bugginess
56
57 Gerard Sharp - bug fix, testing and feedback
58
59 David Ford - Rx ring wrap fix
60
61 Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
62 to find and fix a crucial bug on older chipsets.
63
64 Donald Becker/Chris Butterworth/Marcus Westergren -
65 Noticed various Rx packet size-related buglets.
66
67 Santiago Garcia Mantinan - testing and feedback
68
69 Jens David - 2.2.x kernel backports
70
71 Martin Dennett - incredibly helpful insight on undocumented
72 features of the 8139 chips
73
74 Jean-Jacques Michel - bug fix
75
76 Tobias Ringström - Rx interrupt status checking suggestion
77
78 Andrew Morton - Clear blocked signals, avoid
79 buffer overrun setting current->comm.
80
81 Kalle Olavi Niemitalo - Wake-on-LAN ioctls
82
83 Robert Kuebel - Save kernel thread from dying on any signal.
84
85 Submitting bug reports:
86
87 "rtl8139-diag -mmmaaavvveefN" output
88 enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
89
90*/
91
92#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
93
94#define DRV_NAME "8139too"
95#define DRV_VERSION "0.9.28"
96
97
98#include <linux/module.h>
99#include <linux/kernel.h>
100#include <linux/compiler.h>
101#include <linux/pci.h>
102#include <linux/init.h>
103#include <linux/interrupt.h>
104#include <linux/netdevice.h>
105#include <linux/etherdevice.h>
106#include <linux/rtnetlink.h>
107#include <linux/delay.h>
108#include <linux/ethtool.h>
109#include <linux/mii.h>
110#include <linux/completion.h>
111#include <linux/crc32.h>
112#include <linux/io.h>
113#include <linux/uaccess.h>
114#include <linux/gfp.h>
115#include <asm/irq.h>
116
117#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
118
119/* Default Message level */
120#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
121 NETIF_MSG_PROBE | \
122 NETIF_MSG_LINK)
123
124
125/* define to 1, 2 or 3 to enable copious debugging info */
126#define RTL8139_DEBUG 0
127
128/* define to 1 to disable lightweight runtime debugging checks */
129#undef RTL8139_NDEBUG
130
131
132#ifdef RTL8139_NDEBUG
133# define assert(expr) do {} while (0)
134#else
135# define assert(expr) \
136 if (unlikely(!(expr))) { \
137 pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
138 #expr, __FILE__, __func__, __LINE__); \
139 }
140#endif
141
142
143/* A few user-configurable values. */
144/* media options */
145#define MAX_UNITS 8
146static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
147static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
148
149/* Whether to use MMIO or PIO. Default to MMIO. */
150#ifdef CONFIG_8139TOO_PIO
151static int use_io = 1;
152#else
153static int use_io = 0;
154#endif
155
156/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
157 The RTL chips use a 64 element hash table based on the Ethernet CRC. */
158static int multicast_filter_limit = 32;
159
160/* bitmapped message enable number */
161static int debug = -1;
162
163/*
164 * Receive ring size
165 * Warning: 64K ring has hardware issues and may lock up.
166 */
167#if defined(CONFIG_SH_DREAMCAST)
168#define RX_BUF_IDX 0 /* 8K ring */
169#else
170#define RX_BUF_IDX 2 /* 32K ring */
171#endif
172#define RX_BUF_LEN (8192 << RX_BUF_IDX)
173#define RX_BUF_PAD 16
174#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
175
176#if RX_BUF_LEN == 65536
177#define RX_BUF_TOT_LEN RX_BUF_LEN
178#else
179#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
180#endif
181
182/* Number of Tx descriptor registers. */
183#define NUM_TX_DESC 4
184
185/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
186#define MAX_ETH_FRAME_SIZE 1536
187
188/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
189#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
190#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
191
192/* PCI Tuning Parameters
193 Threshold is bytes transferred to chip before transmission starts. */
194#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
195
196/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
197#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
198#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
199#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
200#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
201
202/* Operational parameters that usually are not changed. */
203/* Time in jiffies before concluding the transmitter is hung. */
204#define TX_TIMEOUT (6*HZ)
205
206
207enum {
208 HAS_MII_XCVR = 0x010000,
209 HAS_CHIP_XCVR = 0x020000,
210 HAS_LNK_CHNG = 0x040000,
211};
212
213#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
214#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
215#define RTL_MIN_IO_SIZE 0x80
216#define RTL8139B_IO_SIZE 256
217
218#define RTL8129_CAPS HAS_MII_XCVR
219#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
220
221typedef enum {
222 RTL8139 = 0,
223 RTL8129,
224} board_t;
225
226
227/* indexed by board_t, above */
228static const struct {
229 const char *name;
230 u32 hw_flags;
231} board_info[] __devinitdata = {
232 { "RealTek RTL8139", RTL8139_CAPS },
233 { "RealTek RTL8129", RTL8129_CAPS },
234};
235
236
237static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
238 {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
239 {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
240 {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
241 {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
242 {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
243 {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
244 {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
245 {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
246 {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
247 {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
248 {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
249 {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
250 {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
251 {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
252 {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
253 {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
254 {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
255 {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
256 {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
257
258#ifdef CONFIG_SH_SECUREEDGE5410
259 /* Bogus 8139 silicon reports 8129 without external PROM :-( */
260 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
261#endif
262#ifdef CONFIG_8139TOO_8129
263 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
264#endif
265
266 /* some crazy cards report invalid vendor ids like
267 * 0x0001 here. The other ids are valid and constant,
268 * so we simply don't match on the main vendor id.
269 */
270 {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
271 {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
272 {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
273
274 {0,}
275};
276MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
277
278static struct {
279 const char str[ETH_GSTRING_LEN];
280} ethtool_stats_keys[] = {
281 { "early_rx" },
282 { "tx_buf_mapped" },
283 { "tx_timeouts" },
284 { "rx_lost_in_ring" },
285};
286
287/* The rest of these values should never change. */
288
289/* Symbolic offsets to registers. */
290enum RTL8139_registers {
291 MAC0 = 0, /* Ethernet hardware address. */
292 MAR0 = 8, /* Multicast filter. */
293 TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
294 TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
295 RxBuf = 0x30,
296 ChipCmd = 0x37,
297 RxBufPtr = 0x38,
298 RxBufAddr = 0x3A,
299 IntrMask = 0x3C,
300 IntrStatus = 0x3E,
301 TxConfig = 0x40,
302 RxConfig = 0x44,
303 Timer = 0x48, /* A general-purpose counter. */
304 RxMissed = 0x4C, /* 24 bits valid, write clears. */
305 Cfg9346 = 0x50,
306 Config0 = 0x51,
307 Config1 = 0x52,
308 TimerInt = 0x54,
309 MediaStatus = 0x58,
310 Config3 = 0x59,
311 Config4 = 0x5A, /* absent on RTL-8139A */
312 HltClk = 0x5B,
313 MultiIntr = 0x5C,
314 TxSummary = 0x60,
315 BasicModeCtrl = 0x62,
316 BasicModeStatus = 0x64,
317 NWayAdvert = 0x66,
318 NWayLPAR = 0x68,
319 NWayExpansion = 0x6A,
320 /* Undocumented registers, but required for proper operation. */
321 FIFOTMS = 0x70, /* FIFO Control and test. */
322 CSCR = 0x74, /* Chip Status and Configuration Register. */
323 PARA78 = 0x78,
324 FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */
325 PARA7c = 0x7c, /* Magic transceiver parameter register. */
326 Config5 = 0xD8, /* absent on RTL-8139A */
327};
328
329enum ClearBitMasks {
330 MultiIntrClear = 0xF000,
331 ChipCmdClear = 0xE2,
332 Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
333};
334
335enum ChipCmdBits {
336 CmdReset = 0x10,
337 CmdRxEnb = 0x08,
338 CmdTxEnb = 0x04,
339 RxBufEmpty = 0x01,
340};
341
342/* Interrupt register bits, using my own meaningful names. */
343enum IntrStatusBits {
344 PCIErr = 0x8000,
345 PCSTimeout = 0x4000,
346 RxFIFOOver = 0x40,
347 RxUnderrun = 0x20,
348 RxOverflow = 0x10,
349 TxErr = 0x08,
350 TxOK = 0x04,
351 RxErr = 0x02,
352 RxOK = 0x01,
353
354 RxAckBits = RxFIFOOver | RxOverflow | RxOK,
355};
356
357enum TxStatusBits {
358 TxHostOwns = 0x2000,
359 TxUnderrun = 0x4000,
360 TxStatOK = 0x8000,
361 TxOutOfWindow = 0x20000000,
362 TxAborted = 0x40000000,
363 TxCarrierLost = 0x80000000,
364};
365enum RxStatusBits {
366 RxMulticast = 0x8000,
367 RxPhysical = 0x4000,
368 RxBroadcast = 0x2000,
369 RxBadSymbol = 0x0020,
370 RxRunt = 0x0010,
371 RxTooLong = 0x0008,
372 RxCRCErr = 0x0004,
373 RxBadAlign = 0x0002,
374 RxStatusOK = 0x0001,
375};
376
377/* Bits in RxConfig. */
378enum rx_mode_bits {
379 AcceptErr = 0x20,
380 AcceptRunt = 0x10,
381 AcceptBroadcast = 0x08,
382 AcceptMulticast = 0x04,
383 AcceptMyPhys = 0x02,
384 AcceptAllPhys = 0x01,
385};
386
387/* Bits in TxConfig. */
388enum tx_config_bits {
389 /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
390 TxIFGShift = 24,
391 TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
392 TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
393 TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
394 TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
395
396 TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
397 TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
398 TxClearAbt = (1 << 0), /* Clear abort (WO) */
399 TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
400 TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
401
402 TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
403};
404
405/* Bits in Config1 */
406enum Config1Bits {
407 Cfg1_PM_Enable = 0x01,
408 Cfg1_VPD_Enable = 0x02,
409 Cfg1_PIO = 0x04,
410 Cfg1_MMIO = 0x08,
411 LWAKE = 0x10, /* not on 8139, 8139A */
412 Cfg1_Driver_Load = 0x20,
413 Cfg1_LED0 = 0x40,
414 Cfg1_LED1 = 0x80,
415 SLEEP = (1 << 1), /* only on 8139, 8139A */
416 PWRDN = (1 << 0), /* only on 8139, 8139A */
417};
418
419/* Bits in Config3 */
420enum Config3Bits {
421 Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
422 Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
423 Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
424 Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
425 Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
426 Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
427 Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
428 Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
429};
430
431/* Bits in Config4 */
432enum Config4Bits {
433 LWPTN = (1 << 2), /* not on 8139, 8139A */
434};
435
436/* Bits in Config5 */
437enum Config5Bits {
438 Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
439 Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
440 Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
441 Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
442 Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
443 Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
444 Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
445};
446
447enum RxConfigBits {
448 /* rx fifo threshold */
449 RxCfgFIFOShift = 13,
450 RxCfgFIFONone = (7 << RxCfgFIFOShift),
451
452 /* Max DMA burst */
453 RxCfgDMAShift = 8,
454 RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
455
456 /* rx ring buffer length */
457 RxCfgRcv8K = 0,
458 RxCfgRcv16K = (1 << 11),
459 RxCfgRcv32K = (1 << 12),
460 RxCfgRcv64K = (1 << 11) | (1 << 12),
461
462 /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
463 RxNoWrap = (1 << 7),
464};
465
466/* Twister tuning parameters from RealTek.
467 Completely undocumented, but required to tune bad links on some boards. */
468enum CSCRBits {
469 CSCR_LinkOKBit = 0x0400,
470 CSCR_LinkChangeBit = 0x0800,
471 CSCR_LinkStatusBits = 0x0f000,
472 CSCR_LinkDownOffCmd = 0x003c0,
473 CSCR_LinkDownCmd = 0x0f3c0,
474};
475
476enum Cfg9346Bits {
477 Cfg9346_Lock = 0x00,
478 Cfg9346_Unlock = 0xC0,
479};
480
481typedef enum {
482 CH_8139 = 0,
483 CH_8139_K,
484 CH_8139A,
485 CH_8139A_G,
486 CH_8139B,
487 CH_8130,
488 CH_8139C,
489 CH_8100,
490 CH_8100B_8139D,
491 CH_8101,
492} chip_t;
493
494enum chip_flags {
495 HasHltClk = (1 << 0),
496 HasLWake = (1 << 1),
497};
498
499#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
500 (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
501#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
502
503/* directly indexed by chip_t, above */
504static const struct {
505 const char *name;
506 u32 version; /* from RTL8139C/RTL8139D docs */
507 u32 flags;
508} rtl_chip_info[] = {
509 { "RTL-8139",
510 HW_REVID(1, 0, 0, 0, 0, 0, 0),
511 HasHltClk,
512 },
513
514 { "RTL-8139 rev K",
515 HW_REVID(1, 1, 0, 0, 0, 0, 0),
516 HasHltClk,
517 },
518
519 { "RTL-8139A",
520 HW_REVID(1, 1, 1, 0, 0, 0, 0),
521 HasHltClk, /* XXX undocumented? */
522 },
523
524 { "RTL-8139A rev G",
525 HW_REVID(1, 1, 1, 0, 0, 1, 0),
526 HasHltClk, /* XXX undocumented? */
527 },
528
529 { "RTL-8139B",
530 HW_REVID(1, 1, 1, 1, 0, 0, 0),
531 HasLWake,
532 },
533
534 { "RTL-8130",
535 HW_REVID(1, 1, 1, 1, 1, 0, 0),
536 HasLWake,
537 },
538
539 { "RTL-8139C",
540 HW_REVID(1, 1, 1, 0, 1, 0, 0),
541 HasLWake,
542 },
543
544 { "RTL-8100",
545 HW_REVID(1, 1, 1, 1, 0, 1, 0),
546 HasLWake,
547 },
548
549 { "RTL-8100B/8139D",
550 HW_REVID(1, 1, 1, 0, 1, 0, 1),
551 HasHltClk /* XXX undocumented? */
552 | HasLWake,
553 },
554
555 { "RTL-8101",
556 HW_REVID(1, 1, 1, 0, 1, 1, 1),
557 HasLWake,
558 },
559};
560
561struct rtl_extra_stats {
562 unsigned long early_rx;
563 unsigned long tx_buf_mapped;
564 unsigned long tx_timeouts;
565 unsigned long rx_lost_in_ring;
566};
567
568struct rtl8139_private {
569 void __iomem *mmio_addr;
570 int drv_flags;
571 struct pci_dev *pci_dev;
572 u32 msg_enable;
573 struct napi_struct napi;
574 struct net_device *dev;
575
576 unsigned char *rx_ring;
577 unsigned int cur_rx; /* RX buf index of next pkt */
578 dma_addr_t rx_ring_dma;
579
580 unsigned int tx_flag;
581 unsigned long cur_tx;
582 unsigned long dirty_tx;
583 unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
584 unsigned char *tx_bufs; /* Tx bounce buffer region. */
585 dma_addr_t tx_bufs_dma;
586
587 signed char phys[4]; /* MII device addresses. */
588
589 /* Twister tune state. */
590 char twistie, twist_row, twist_col;
591
592 unsigned int watchdog_fired : 1;
593 unsigned int default_port : 4; /* Last dev->if_port value. */
594 unsigned int have_thread : 1;
595
596 spinlock_t lock;
597 spinlock_t rx_lock;
598
599 chip_t chipset;
600 u32 rx_config;
601 struct rtl_extra_stats xstats;
602
603 struct delayed_work thread;
604
605 struct mii_if_info mii;
606 unsigned int regs_len;
607 unsigned long fifo_copy_timeout;
608};
609
610MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
611MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
612MODULE_LICENSE("GPL");
613MODULE_VERSION(DRV_VERSION);
614
615module_param(use_io, int, 0);
616MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
617module_param(multicast_filter_limit, int, 0);
618module_param_array(media, int, NULL, 0);
619module_param_array(full_duplex, int, NULL, 0);
620module_param(debug, int, 0);
621MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
622MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
623MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
624MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
625
626static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
627static int rtl8139_open (struct net_device *dev);
628static int mdio_read (struct net_device *dev, int phy_id, int location);
629static void mdio_write (struct net_device *dev, int phy_id, int location,
630 int val);
631static void rtl8139_start_thread(struct rtl8139_private *tp);
632static void rtl8139_tx_timeout (struct net_device *dev);
633static void rtl8139_init_ring (struct net_device *dev);
634static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
635 struct net_device *dev);
636#ifdef CONFIG_NET_POLL_CONTROLLER
637static void rtl8139_poll_controller(struct net_device *dev);
638#endif
639static int rtl8139_set_mac_address(struct net_device *dev, void *p);
640static int rtl8139_poll(struct napi_struct *napi, int budget);
641static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
642static int rtl8139_close (struct net_device *dev);
643static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
644static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
645static void rtl8139_set_rx_mode (struct net_device *dev);
646static void __set_rx_mode (struct net_device *dev);
647static void rtl8139_hw_start (struct net_device *dev);
648static void rtl8139_thread (struct work_struct *work);
649static void rtl8139_tx_timeout_task(struct work_struct *work);
650static const struct ethtool_ops rtl8139_ethtool_ops;
651
652/* write MMIO register, with flush */
653/* Flush avoids rtl8139 bug w/ posted MMIO writes */
654#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
655#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
656#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
657
658/* write MMIO register */
659#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
660#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
661#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
662
663/* read MMIO register */
664#define RTL_R8(reg) ioread8 (ioaddr + (reg))
665#define RTL_R16(reg) ioread16 (ioaddr + (reg))
666#define RTL_R32(reg) ioread32 (ioaddr + (reg))
667
668
669static const u16 rtl8139_intr_mask =
670 PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
671 TxErr | TxOK | RxErr | RxOK;
672
673static const u16 rtl8139_norx_intr_mask =
674 PCIErr | PCSTimeout | RxUnderrun |
675 TxErr | TxOK | RxErr ;
676
677#if RX_BUF_IDX == 0
678static const unsigned int rtl8139_rx_config =
679 RxCfgRcv8K | RxNoWrap |
680 (RX_FIFO_THRESH << RxCfgFIFOShift) |
681 (RX_DMA_BURST << RxCfgDMAShift);
682#elif RX_BUF_IDX == 1
683static const unsigned int rtl8139_rx_config =
684 RxCfgRcv16K | RxNoWrap |
685 (RX_FIFO_THRESH << RxCfgFIFOShift) |
686 (RX_DMA_BURST << RxCfgDMAShift);
687#elif RX_BUF_IDX == 2
688static const unsigned int rtl8139_rx_config =
689 RxCfgRcv32K | RxNoWrap |
690 (RX_FIFO_THRESH << RxCfgFIFOShift) |
691 (RX_DMA_BURST << RxCfgDMAShift);
692#elif RX_BUF_IDX == 3
693static const unsigned int rtl8139_rx_config =
694 RxCfgRcv64K |
695 (RX_FIFO_THRESH << RxCfgFIFOShift) |
696 (RX_DMA_BURST << RxCfgDMAShift);
697#else
698#error "Invalid configuration for 8139_RXBUF_IDX"
699#endif
700
701static const unsigned int rtl8139_tx_config =
702 TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
703
704static void __rtl8139_cleanup_dev (struct net_device *dev)
705{
706 struct rtl8139_private *tp = netdev_priv(dev);
707 struct pci_dev *pdev;
708
709 assert (dev != NULL);
710 assert (tp->pci_dev != NULL);
711 pdev = tp->pci_dev;
712
713 if (tp->mmio_addr)
714 pci_iounmap (pdev, tp->mmio_addr);
715
716 /* it's ok to call this even if we have no regions to free */
717 pci_release_regions (pdev);
718
719 free_netdev(dev);
720 pci_set_drvdata (pdev, NULL);
721}
722
723
724static void rtl8139_chip_reset (void __iomem *ioaddr)
725{
726 int i;
727
728 /* Soft reset the chip. */
729 RTL_W8 (ChipCmd, CmdReset);
730
731 /* Check that the chip has finished the reset. */
732 for (i = 1000; i > 0; i--) {
733 barrier();
734 if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
735 break;
736 udelay (10);
737 }
738}
739
740
741static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
742{
743 void __iomem *ioaddr;
744 struct net_device *dev;
745 struct rtl8139_private *tp;
746 u8 tmp8;
747 int rc, disable_dev_on_err = 0;
748 unsigned int i;
749 unsigned long pio_start, pio_end, pio_flags, pio_len;
750 unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
751 u32 version;
752
753 assert (pdev != NULL);
754
755 /* dev and priv zeroed in alloc_etherdev */
756 dev = alloc_etherdev (sizeof (*tp));
757 if (dev == NULL) {
758 dev_err(&pdev->dev, "Unable to alloc new net device\n");
759 return ERR_PTR(-ENOMEM);
760 }
761 SET_NETDEV_DEV(dev, &pdev->dev);
762
763 tp = netdev_priv(dev);
764 tp->pci_dev = pdev;
765
766 /* enable device (incl. PCI PM wakeup and hotplug setup) */
767 rc = pci_enable_device (pdev);
768 if (rc)
769 goto err_out;
770
771 pio_start = pci_resource_start (pdev, 0);
772 pio_end = pci_resource_end (pdev, 0);
773 pio_flags = pci_resource_flags (pdev, 0);
774 pio_len = pci_resource_len (pdev, 0);
775
776 mmio_start = pci_resource_start (pdev, 1);
777 mmio_end = pci_resource_end (pdev, 1);
778 mmio_flags = pci_resource_flags (pdev, 1);
779 mmio_len = pci_resource_len (pdev, 1);
780
781 /* set this immediately, we need to know before
782 * we talk to the chip directly */
783 pr_debug("PIO region size == 0x%02lX\n", pio_len);
784 pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
785
786retry:
787 if (use_io) {
788 /* make sure PCI base addr 0 is PIO */
789 if (!(pio_flags & IORESOURCE_IO)) {
790 dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
791 rc = -ENODEV;
792 goto err_out;
793 }
794 /* check for weird/broken PCI region reporting */
795 if (pio_len < RTL_MIN_IO_SIZE) {
796 dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
797 rc = -ENODEV;
798 goto err_out;
799 }
800 } else {
801 /* make sure PCI base addr 1 is MMIO */
802 if (!(mmio_flags & IORESOURCE_MEM)) {
803 dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
804 rc = -ENODEV;
805 goto err_out;
806 }
807 if (mmio_len < RTL_MIN_IO_SIZE) {
808 dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
809 rc = -ENODEV;
810 goto err_out;
811 }
812 }
813
814 rc = pci_request_regions (pdev, DRV_NAME);
815 if (rc)
816 goto err_out;
817 disable_dev_on_err = 1;
818
819 /* enable PCI bus-mastering */
820 pci_set_master (pdev);
821
822 if (use_io) {
823 ioaddr = pci_iomap(pdev, 0, 0);
824 if (!ioaddr) {
825 dev_err(&pdev->dev, "cannot map PIO, aborting\n");
826 rc = -EIO;
827 goto err_out;
828 }
829 dev->base_addr = pio_start;
830 tp->regs_len = pio_len;
831 } else {
832 /* ioremap MMIO region */
833 ioaddr = pci_iomap(pdev, 1, 0);
834 if (ioaddr == NULL) {
835 dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
836 pci_release_regions(pdev);
837 use_io = 1;
838 goto retry;
839 }
840 dev->base_addr = (long) ioaddr;
841 tp->regs_len = mmio_len;
842 }
843 tp->mmio_addr = ioaddr;
844
845 /* Bring old chips out of low-power mode. */
846 RTL_W8 (HltClk, 'R');
847
848 /* check for missing/broken hardware */
849 if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
850 dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
851 rc = -EIO;
852 goto err_out;
853 }
854
855 /* identify chip attached to board */
856 version = RTL_R32 (TxConfig) & HW_REVID_MASK;
857 for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
858 if (version == rtl_chip_info[i].version) {
859 tp->chipset = i;
860 goto match;
861 }
862
863 /* if unknown chip, assume array element #0, original RTL-8139 in this case */
864 i = 0;
865 dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
866 dev_dbg(&pdev->dev, "TxConfig = 0x%x\n", RTL_R32 (TxConfig));
867 tp->chipset = 0;
868
869match:
870 pr_debug("chipset id (%d) == index %d, '%s'\n",
871 version, i, rtl_chip_info[i].name);
872
873 if (tp->chipset >= CH_8139B) {
874 u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
875 pr_debug("PCI PM wakeup\n");
876 if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
877 (tmp8 & LWAKE))
878 new_tmp8 &= ~LWAKE;
879 new_tmp8 |= Cfg1_PM_Enable;
880 if (new_tmp8 != tmp8) {
881 RTL_W8 (Cfg9346, Cfg9346_Unlock);
882 RTL_W8 (Config1, tmp8);
883 RTL_W8 (Cfg9346, Cfg9346_Lock);
884 }
885 if (rtl_chip_info[tp->chipset].flags & HasLWake) {
886 tmp8 = RTL_R8 (Config4);
887 if (tmp8 & LWPTN) {
888 RTL_W8 (Cfg9346, Cfg9346_Unlock);
889 RTL_W8 (Config4, tmp8 & ~LWPTN);
890 RTL_W8 (Cfg9346, Cfg9346_Lock);
891 }
892 }
893 } else {
894 pr_debug("Old chip wakeup\n");
895 tmp8 = RTL_R8 (Config1);
896 tmp8 &= ~(SLEEP | PWRDN);
897 RTL_W8 (Config1, tmp8);
898 }
899
900 rtl8139_chip_reset (ioaddr);
901
902 return dev;
903
904err_out:
905 __rtl8139_cleanup_dev (dev);
906 if (disable_dev_on_err)
907 pci_disable_device (pdev);
908 return ERR_PTR(rc);
909}
910
911static const struct net_device_ops rtl8139_netdev_ops = {
912 .ndo_open = rtl8139_open,
913 .ndo_stop = rtl8139_close,
914 .ndo_get_stats = rtl8139_get_stats,
915 .ndo_change_mtu = eth_change_mtu,
916 .ndo_validate_addr = eth_validate_addr,
917 .ndo_set_mac_address = rtl8139_set_mac_address,
918 .ndo_start_xmit = rtl8139_start_xmit,
919 .ndo_set_multicast_list = rtl8139_set_rx_mode,
920 .ndo_do_ioctl = netdev_ioctl,
921 .ndo_tx_timeout = rtl8139_tx_timeout,
922#ifdef CONFIG_NET_POLL_CONTROLLER
923 .ndo_poll_controller = rtl8139_poll_controller,
924#endif
925};
926
927static int __devinit rtl8139_init_one (struct pci_dev *pdev,
928 const struct pci_device_id *ent)
929{
930 struct net_device *dev = NULL;
931 struct rtl8139_private *tp;
932 int i, addr_len, option;
933 void __iomem *ioaddr;
934 static int board_idx = -1;
935
936 assert (pdev != NULL);
937 assert (ent != NULL);
938
939 board_idx++;
940
941 /* when we're built into the kernel, the driver version message
942 * is only printed if at least one 8139 board has been found
943 */
944#ifndef MODULE
945 {
946 static int printed_version;
947 if (!printed_version++)
948 pr_info(RTL8139_DRIVER_NAME "\n");
949 }
950#endif
951
952 if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
953 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
954 dev_info(&pdev->dev,
955 "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n",
956 pdev->vendor, pdev->device, pdev->revision);
957 return -ENODEV;
958 }
959
960 if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
961 pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
962 pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
963 pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
964 pr_info("OQO Model 2 detected. Forcing PIO\n");
965 use_io = 1;
966 }
967
968 dev = rtl8139_init_board (pdev);
969 if (IS_ERR(dev))
970 return PTR_ERR(dev);
971
972 assert (dev != NULL);
973 tp = netdev_priv(dev);
974 tp->dev = dev;
975
976 ioaddr = tp->mmio_addr;
977 assert (ioaddr != NULL);
978
979 addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
980 for (i = 0; i < 3; i++)
981 ((__le16 *) (dev->dev_addr))[i] =
982 cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
983 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
984
985 /* The Rtl8139-specific entries in the device structure. */
986 dev->netdev_ops = &rtl8139_netdev_ops;
987 dev->ethtool_ops = &rtl8139_ethtool_ops;
988 dev->watchdog_timeo = TX_TIMEOUT;
989 netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
990
991 /* note: the hardware is not capable of sg/csum/highdma, however
992 * through the use of skb_copy_and_csum_dev we enable these
993 * features
994 */
995 dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
996 dev->vlan_features = dev->features;
997
998 dev->irq = pdev->irq;
999
1000 /* tp zeroed and aligned in alloc_etherdev */
1001 tp = netdev_priv(dev);
1002
1003 /* note: tp->chipset set in rtl8139_init_board */
1004 tp->drv_flags = board_info[ent->driver_data].hw_flags;
1005 tp->mmio_addr = ioaddr;
1006 tp->msg_enable =
1007 (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
1008 spin_lock_init (&tp->lock);
1009 spin_lock_init (&tp->rx_lock);
1010 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1011 tp->mii.dev = dev;
1012 tp->mii.mdio_read = mdio_read;
1013 tp->mii.mdio_write = mdio_write;
1014 tp->mii.phy_id_mask = 0x3f;
1015 tp->mii.reg_num_mask = 0x1f;
1016
1017 /* dev is fully set up and ready to use now */
1018 pr_debug("about to register device named %s (%p)...\n",
1019 dev->name, dev);
1020 i = register_netdev (dev);
1021 if (i) goto err_out;
1022
1023 pci_set_drvdata (pdev, dev);
1024
1025 netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
1026 board_info[ent->driver_data].name,
1027 dev->base_addr, dev->dev_addr, dev->irq);
1028
1029 netdev_dbg(dev, "Identified 8139 chip type '%s'\n",
1030 rtl_chip_info[tp->chipset].name);
1031
1032 /* Find the connected MII xcvrs.
1033 Doing this in open() would allow detecting external xcvrs later, but
1034 takes too much time. */
1035#ifdef CONFIG_8139TOO_8129
1036 if (tp->drv_flags & HAS_MII_XCVR) {
1037 int phy, phy_idx = 0;
1038 for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
1039 int mii_status = mdio_read(dev, phy, 1);
1040 if (mii_status != 0xffff && mii_status != 0x0000) {
1041 u16 advertising = mdio_read(dev, phy, 4);
1042 tp->phys[phy_idx++] = phy;
1043 netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n",
1044 phy, mii_status, advertising);
1045 }
1046 }
1047 if (phy_idx == 0) {
1048 netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n");
1049 tp->phys[0] = 32;
1050 }
1051 } else
1052#endif
1053 tp->phys[0] = 32;
1054 tp->mii.phy_id = tp->phys[0];
1055
1056 /* The lower four bits are the media type. */
1057 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
1058 if (option > 0) {
1059 tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
1060 tp->default_port = option & 0xFF;
1061 if (tp->default_port)
1062 tp->mii.force_media = 1;
1063 }
1064 if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
1065 tp->mii.full_duplex = full_duplex[board_idx];
1066 if (tp->mii.full_duplex) {
1067 netdev_info(dev, "Media type forced to Full Duplex\n");
1068 /* Changing the MII-advertised media because might prevent
1069 re-connection. */
1070 tp->mii.force_media = 1;
1071 }
1072 if (tp->default_port) {
1073 netdev_info(dev, " Forcing %dMbps %s-duplex operation\n",
1074 (option & 0x20 ? 100 : 10),
1075 (option & 0x10 ? "full" : "half"));
1076 mdio_write(dev, tp->phys[0], 0,
1077 ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
1078 ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
1079 }
1080
1081 /* Put the chip into low-power mode. */
1082 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1083 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
1084
1085 return 0;
1086
1087err_out:
1088 __rtl8139_cleanup_dev (dev);
1089 pci_disable_device (pdev);
1090 return i;
1091}
1092
1093
1094static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
1095{
1096 struct net_device *dev = pci_get_drvdata (pdev);
1097 struct rtl8139_private *tp = netdev_priv(dev);
1098
1099 assert (dev != NULL);
1100
1101 cancel_delayed_work_sync(&tp->thread);
1102
1103 unregister_netdev (dev);
1104
1105 __rtl8139_cleanup_dev (dev);
1106 pci_disable_device (pdev);
1107}
1108
1109
1110/* Serial EEPROM section. */
1111
1112/* EEPROM_Ctrl bits. */
1113#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
1114#define EE_CS 0x08 /* EEPROM chip select. */
1115#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
1116#define EE_WRITE_0 0x00
1117#define EE_WRITE_1 0x02
1118#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
1119#define EE_ENB (0x80 | EE_CS)
1120
1121/* Delay between EEPROM clock transitions.
1122 No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
1123 */
1124
1125#define eeprom_delay() (void)RTL_R32(Cfg9346)
1126
1127/* The EEPROM commands include the alway-set leading bit. */
1128#define EE_WRITE_CMD (5)
1129#define EE_READ_CMD (6)
1130#define EE_ERASE_CMD (7)
1131
1132static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
1133{
1134 int i;
1135 unsigned retval = 0;
1136 int read_cmd = location | (EE_READ_CMD << addr_len);
1137
1138 RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
1139 RTL_W8 (Cfg9346, EE_ENB);
1140 eeprom_delay ();
1141
1142 /* Shift the read command bits out. */
1143 for (i = 4 + addr_len; i >= 0; i--) {
1144 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
1145 RTL_W8 (Cfg9346, EE_ENB | dataval);
1146 eeprom_delay ();
1147 RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
1148 eeprom_delay ();
1149 }
1150 RTL_W8 (Cfg9346, EE_ENB);
1151 eeprom_delay ();
1152
1153 for (i = 16; i > 0; i--) {
1154 RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
1155 eeprom_delay ();
1156 retval =
1157 (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
1158 0);
1159 RTL_W8 (Cfg9346, EE_ENB);
1160 eeprom_delay ();
1161 }
1162
1163 /* Terminate the EEPROM access. */
1164 RTL_W8 (Cfg9346, ~EE_CS);
1165 eeprom_delay ();
1166
1167 return retval;
1168}
1169
1170/* MII serial management: mostly bogus for now. */
1171/* Read and write the MII management registers using software-generated
1172 serial MDIO protocol.
1173 The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
1174 met by back-to-back PCI I/O cycles, but we insert a delay to avoid
1175 "overclocking" issues. */
1176#define MDIO_DIR 0x80
1177#define MDIO_DATA_OUT 0x04
1178#define MDIO_DATA_IN 0x02
1179#define MDIO_CLK 0x01
1180#define MDIO_WRITE0 (MDIO_DIR)
1181#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
1182
1183#define mdio_delay() RTL_R8(Config4)
1184
1185
1186static const char mii_2_8139_map[8] = {
1187 BasicModeCtrl,
1188 BasicModeStatus,
1189 0,
1190 0,
1191 NWayAdvert,
1192 NWayLPAR,
1193 NWayExpansion,
1194 0
1195};
1196
1197
1198#ifdef CONFIG_8139TOO_8129
1199/* Syncronize the MII management interface by shifting 32 one bits out. */
1200static void mdio_sync (void __iomem *ioaddr)
1201{
1202 int i;
1203
1204 for (i = 32; i >= 0; i--) {
1205 RTL_W8 (Config4, MDIO_WRITE1);
1206 mdio_delay ();
1207 RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
1208 mdio_delay ();
1209 }
1210}
1211#endif
1212
1213static int mdio_read (struct net_device *dev, int phy_id, int location)
1214{
1215 struct rtl8139_private *tp = netdev_priv(dev);
1216 int retval = 0;
1217#ifdef CONFIG_8139TOO_8129
1218 void __iomem *ioaddr = tp->mmio_addr;
1219 int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
1220 int i;
1221#endif
1222
1223 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1224 void __iomem *ioaddr = tp->mmio_addr;
1225 return location < 8 && mii_2_8139_map[location] ?
1226 RTL_R16 (mii_2_8139_map[location]) : 0;
1227 }
1228
1229#ifdef CONFIG_8139TOO_8129
1230 mdio_sync (ioaddr);
1231 /* Shift the read command bits out. */
1232 for (i = 15; i >= 0; i--) {
1233 int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
1234
1235 RTL_W8 (Config4, MDIO_DIR | dataval);
1236 mdio_delay ();
1237 RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
1238 mdio_delay ();
1239 }
1240
1241 /* Read the two transition, 16 data, and wire-idle bits. */
1242 for (i = 19; i > 0; i--) {
1243 RTL_W8 (Config4, 0);
1244 mdio_delay ();
1245 retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
1246 RTL_W8 (Config4, MDIO_CLK);
1247 mdio_delay ();
1248 }
1249#endif
1250
1251 return (retval >> 1) & 0xffff;
1252}
1253
1254
1255static void mdio_write (struct net_device *dev, int phy_id, int location,
1256 int value)
1257{
1258 struct rtl8139_private *tp = netdev_priv(dev);
1259#ifdef CONFIG_8139TOO_8129
1260 void __iomem *ioaddr = tp->mmio_addr;
1261 int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
1262 int i;
1263#endif
1264
1265 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1266 void __iomem *ioaddr = tp->mmio_addr;
1267 if (location == 0) {
1268 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1269 RTL_W16 (BasicModeCtrl, value);
1270 RTL_W8 (Cfg9346, Cfg9346_Lock);
1271 } else if (location < 8 && mii_2_8139_map[location])
1272 RTL_W16 (mii_2_8139_map[location], value);
1273 return;
1274 }
1275
1276#ifdef CONFIG_8139TOO_8129
1277 mdio_sync (ioaddr);
1278
1279 /* Shift the command bits out. */
1280 for (i = 31; i >= 0; i--) {
1281 int dataval =
1282 (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
1283 RTL_W8 (Config4, dataval);
1284 mdio_delay ();
1285 RTL_W8 (Config4, dataval | MDIO_CLK);
1286 mdio_delay ();
1287 }
1288 /* Clear out extra bits. */
1289 for (i = 2; i > 0; i--) {
1290 RTL_W8 (Config4, 0);
1291 mdio_delay ();
1292 RTL_W8 (Config4, MDIO_CLK);
1293 mdio_delay ();
1294 }
1295#endif
1296}
1297
1298
1299static int rtl8139_open (struct net_device *dev)
1300{
1301 struct rtl8139_private *tp = netdev_priv(dev);
1302 int retval;
1303 void __iomem *ioaddr = tp->mmio_addr;
1304
1305 retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
1306 if (retval)
1307 return retval;
1308
1309 tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1310 &tp->tx_bufs_dma, GFP_KERNEL);
1311 tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1312 &tp->rx_ring_dma, GFP_KERNEL);
1313 if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
1314 free_irq(dev->irq, dev);
1315
1316 if (tp->tx_bufs)
1317 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1318 tp->tx_bufs, tp->tx_bufs_dma);
1319 if (tp->rx_ring)
1320 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1321 tp->rx_ring, tp->rx_ring_dma);
1322
1323 return -ENOMEM;
1324
1325 }
1326
1327 napi_enable(&tp->napi);
1328
1329 tp->mii.full_duplex = tp->mii.force_media;
1330 tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
1331
1332 rtl8139_init_ring (dev);
1333 rtl8139_hw_start (dev);
1334 netif_start_queue (dev);
1335
1336 netif_dbg(tp, ifup, dev,
1337 "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
1338 __func__,
1339 (unsigned long long)pci_resource_start (tp->pci_dev, 1),
1340 dev->irq, RTL_R8 (MediaStatus),
1341 tp->mii.full_duplex ? "full" : "half");
1342
1343 rtl8139_start_thread(tp);
1344
1345 return 0;
1346}
1347
1348
1349static void rtl_check_media (struct net_device *dev, unsigned int init_media)
1350{
1351 struct rtl8139_private *tp = netdev_priv(dev);
1352
1353 if (tp->phys[0] >= 0) {
1354 mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
1355 }
1356}
1357
1358/* Start the hardware at open or resume. */
1359static void rtl8139_hw_start (struct net_device *dev)
1360{
1361 struct rtl8139_private *tp = netdev_priv(dev);
1362 void __iomem *ioaddr = tp->mmio_addr;
1363 u32 i;
1364 u8 tmp;
1365
1366 /* Bring old chips out of low-power mode. */
1367 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1368 RTL_W8 (HltClk, 'R');
1369
1370 rtl8139_chip_reset (ioaddr);
1371
1372 /* unlock Config[01234] and BMCR register writes */
1373 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1374 /* Restore our idea of the MAC address. */
1375 RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
1376 RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
1377
1378 tp->cur_rx = 0;
1379
1380 /* init Rx ring buffer DMA address */
1381 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1382
1383 /* Must enable Tx/Rx before setting transfer thresholds! */
1384 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1385
1386 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1387 RTL_W32 (RxConfig, tp->rx_config);
1388 RTL_W32 (TxConfig, rtl8139_tx_config);
1389
1390 rtl_check_media (dev, 1);
1391
1392 if (tp->chipset >= CH_8139B) {
1393 /* Disable magic packet scanning, which is enabled
1394 * when PM is enabled in Config1. It can be reenabled
1395 * via ETHTOOL_SWOL if desired. */
1396 RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
1397 }
1398
1399 netdev_dbg(dev, "init buffer addresses\n");
1400
1401 /* Lock Config[01234] and BMCR register writes */
1402 RTL_W8 (Cfg9346, Cfg9346_Lock);
1403
1404 /* init Tx buffer DMA addresses */
1405 for (i = 0; i < NUM_TX_DESC; i++)
1406 RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
1407
1408 RTL_W32 (RxMissed, 0);
1409
1410 rtl8139_set_rx_mode (dev);
1411
1412 /* no early-rx interrupts */
1413 RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
1414
1415 /* make sure RxTx has started */
1416 tmp = RTL_R8 (ChipCmd);
1417 if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
1418 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1419
1420 /* Enable all known interrupts by setting the interrupt mask. */
1421 RTL_W16 (IntrMask, rtl8139_intr_mask);
1422}
1423
1424
1425/* Initialize the Rx and Tx rings, along with various 'dev' bits. */
1426static void rtl8139_init_ring (struct net_device *dev)
1427{
1428 struct rtl8139_private *tp = netdev_priv(dev);
1429 int i;
1430
1431 tp->cur_rx = 0;
1432 tp->cur_tx = 0;
1433 tp->dirty_tx = 0;
1434
1435 for (i = 0; i < NUM_TX_DESC; i++)
1436 tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
1437}
1438
1439
1440/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
1441static int next_tick = 3 * HZ;
1442
1443#ifndef CONFIG_8139TOO_TUNE_TWISTER
1444static inline void rtl8139_tune_twister (struct net_device *dev,
1445 struct rtl8139_private *tp) {}
1446#else
1447enum TwisterParamVals {
1448 PARA78_default = 0x78fa8388,
1449 PARA7c_default = 0xcb38de43, /* param[0][3] */
1450 PARA7c_xxx = 0xcb38de43,
1451};
1452
1453static const unsigned long param[4][4] = {
1454 {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
1455 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1456 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1457 {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
1458};
1459
1460static void rtl8139_tune_twister (struct net_device *dev,
1461 struct rtl8139_private *tp)
1462{
1463 int linkcase;
1464 void __iomem *ioaddr = tp->mmio_addr;
1465
1466 /* This is a complicated state machine to configure the "twister" for
1467 impedance/echos based on the cable length.
1468 All of this is magic and undocumented.
1469 */
1470 switch (tp->twistie) {
1471 case 1:
1472 if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
1473 /* We have link beat, let us tune the twister. */
1474 RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
1475 tp->twistie = 2; /* Change to state 2. */
1476 next_tick = HZ / 10;
1477 } else {
1478 /* Just put in some reasonable defaults for when beat returns. */
1479 RTL_W16 (CSCR, CSCR_LinkDownCmd);
1480 RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
1481 RTL_W32 (PARA78, PARA78_default);
1482 RTL_W32 (PARA7c, PARA7c_default);
1483 tp->twistie = 0; /* Bail from future actions. */
1484 }
1485 break;
1486 case 2:
1487 /* Read how long it took to hear the echo. */
1488 linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
1489 if (linkcase == 0x7000)
1490 tp->twist_row = 3;
1491 else if (linkcase == 0x3000)
1492 tp->twist_row = 2;
1493 else if (linkcase == 0x1000)
1494 tp->twist_row = 1;
1495 else
1496 tp->twist_row = 0;
1497 tp->twist_col = 0;
1498 tp->twistie = 3; /* Change to state 2. */
1499 next_tick = HZ / 10;
1500 break;
1501 case 3:
1502 /* Put out four tuning parameters, one per 100msec. */
1503 if (tp->twist_col == 0)
1504 RTL_W16 (FIFOTMS, 0);
1505 RTL_W32 (PARA7c, param[(int) tp->twist_row]
1506 [(int) tp->twist_col]);
1507 next_tick = HZ / 10;
1508 if (++tp->twist_col >= 4) {
1509 /* For short cables we are done.
1510 For long cables (row == 3) check for mistune. */
1511 tp->twistie =
1512 (tp->twist_row == 3) ? 4 : 0;
1513 }
1514 break;
1515 case 4:
1516 /* Special case for long cables: check for mistune. */
1517 if ((RTL_R16 (CSCR) &
1518 CSCR_LinkStatusBits) == 0x7000) {
1519 tp->twistie = 0;
1520 break;
1521 } else {
1522 RTL_W32 (PARA7c, 0xfb38de03);
1523 tp->twistie = 5;
1524 next_tick = HZ / 10;
1525 }
1526 break;
1527 case 5:
1528 /* Retune for shorter cable (column 2). */
1529 RTL_W32 (FIFOTMS, 0x20);
1530 RTL_W32 (PARA78, PARA78_default);
1531 RTL_W32 (PARA7c, PARA7c_default);
1532 RTL_W32 (FIFOTMS, 0x00);
1533 tp->twist_row = 2;
1534 tp->twist_col = 0;
1535 tp->twistie = 3;
1536 next_tick = HZ / 10;
1537 break;
1538
1539 default:
1540 /* do nothing */
1541 break;
1542 }
1543}
1544#endif /* CONFIG_8139TOO_TUNE_TWISTER */
1545
1546static inline void rtl8139_thread_iter (struct net_device *dev,
1547 struct rtl8139_private *tp,
1548 void __iomem *ioaddr)
1549{
1550 int mii_lpa;
1551
1552 mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
1553
1554 if (!tp->mii.force_media && mii_lpa != 0xffff) {
1555 int duplex = ((mii_lpa & LPA_100FULL) ||
1556 (mii_lpa & 0x01C0) == 0x0040);
1557 if (tp->mii.full_duplex != duplex) {
1558 tp->mii.full_duplex = duplex;
1559
1560 if (mii_lpa) {
1561 netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
1562 tp->mii.full_duplex ? "full" : "half",
1563 tp->phys[0], mii_lpa);
1564 } else {
1565 netdev_info(dev, "media is unconnected, link down, or incompatible connection\n");
1566 }
1567#if 0
1568 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1569 RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
1570 RTL_W8 (Cfg9346, Cfg9346_Lock);
1571#endif
1572 }
1573 }
1574
1575 next_tick = HZ * 60;
1576
1577 rtl8139_tune_twister (dev, tp);
1578
1579 netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
1580 RTL_R16(NWayLPAR));
1581 netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n",
1582 RTL_R16(IntrMask), RTL_R16(IntrStatus));
1583 netdev_dbg(dev, "Chip config %02x %02x\n",
1584 RTL_R8(Config0), RTL_R8(Config1));
1585}
1586
1587static void rtl8139_thread (struct work_struct *work)
1588{
1589 struct rtl8139_private *tp =
1590 container_of(work, struct rtl8139_private, thread.work);
1591 struct net_device *dev = tp->mii.dev;
1592 unsigned long thr_delay = next_tick;
1593
1594 rtnl_lock();
1595
1596 if (!netif_running(dev))
1597 goto out_unlock;
1598
1599 if (tp->watchdog_fired) {
1600 tp->watchdog_fired = 0;
1601 rtl8139_tx_timeout_task(work);
1602 } else
1603 rtl8139_thread_iter(dev, tp, tp->mmio_addr);
1604
1605 if (tp->have_thread)
1606 schedule_delayed_work(&tp->thread, thr_delay);
1607out_unlock:
1608 rtnl_unlock ();
1609}
1610
1611static void rtl8139_start_thread(struct rtl8139_private *tp)
1612{
1613 tp->twistie = 0;
1614 if (tp->chipset == CH_8139_K)
1615 tp->twistie = 1;
1616 else if (tp->drv_flags & HAS_LNK_CHNG)
1617 return;
1618
1619 tp->have_thread = 1;
1620 tp->watchdog_fired = 0;
1621
1622 schedule_delayed_work(&tp->thread, next_tick);
1623}
1624
1625static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
1626{
1627 tp->cur_tx = 0;
1628 tp->dirty_tx = 0;
1629
1630 /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
1631}
1632
1633static void rtl8139_tx_timeout_task (struct work_struct *work)
1634{
1635 struct rtl8139_private *tp =
1636 container_of(work, struct rtl8139_private, thread.work);
1637 struct net_device *dev = tp->mii.dev;
1638 void __iomem *ioaddr = tp->mmio_addr;
1639 int i;
1640 u8 tmp8;
1641
1642 netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
1643 RTL_R8(ChipCmd), RTL_R16(IntrStatus),
1644 RTL_R16(IntrMask), RTL_R8(MediaStatus));
1645 /* Emit info to figure out what went wrong. */
1646 netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n",
1647 tp->cur_tx, tp->dirty_tx);
1648 for (i = 0; i < NUM_TX_DESC; i++)
1649 netdev_dbg(dev, "Tx descriptor %d is %08x%s\n",
1650 i, RTL_R32(TxStatus0 + (i * 4)),
1651 i == tp->dirty_tx % NUM_TX_DESC ?
1652 " (queue head)" : "");
1653
1654 tp->xstats.tx_timeouts++;
1655
1656 /* disable Tx ASAP, if not already */
1657 tmp8 = RTL_R8 (ChipCmd);
1658 if (tmp8 & CmdTxEnb)
1659 RTL_W8 (ChipCmd, CmdRxEnb);
1660
1661 spin_lock_bh(&tp->rx_lock);
1662 /* Disable interrupts by clearing the interrupt mask. */
1663 RTL_W16 (IntrMask, 0x0000);
1664
1665 /* Stop a shared interrupt from scavenging while we are. */
1666 spin_lock_irq(&tp->lock);
1667 rtl8139_tx_clear (tp);
1668 spin_unlock_irq(&tp->lock);
1669
1670 /* ...and finally, reset everything */
1671 if (netif_running(dev)) {
1672 rtl8139_hw_start (dev);
1673 netif_wake_queue (dev);
1674 }
1675 spin_unlock_bh(&tp->rx_lock);
1676}
1677
1678static void rtl8139_tx_timeout (struct net_device *dev)
1679{
1680 struct rtl8139_private *tp = netdev_priv(dev);
1681
1682 tp->watchdog_fired = 1;
1683 if (!tp->have_thread) {
1684 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1685 schedule_delayed_work(&tp->thread, next_tick);
1686 }
1687}
1688
1689static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
1690 struct net_device *dev)
1691{
1692 struct rtl8139_private *tp = netdev_priv(dev);
1693 void __iomem *ioaddr = tp->mmio_addr;
1694 unsigned int entry;
1695 unsigned int len = skb->len;
1696 unsigned long flags;
1697
1698 /* Calculate the next Tx descriptor entry. */
1699 entry = tp->cur_tx % NUM_TX_DESC;
1700
1701 /* Note: the chip doesn't have auto-pad! */
1702 if (likely(len < TX_BUF_SIZE)) {
1703 if (len < ETH_ZLEN)
1704 memset(tp->tx_buf[entry], 0, ETH_ZLEN);
1705 skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
1706 dev_kfree_skb(skb);
1707 } else {
1708 dev_kfree_skb(skb);
1709 dev->stats.tx_dropped++;
1710 return NETDEV_TX_OK;
1711 }
1712
1713 spin_lock_irqsave(&tp->lock, flags);
1714 /*
1715 * Writing to TxStatus triggers a DMA transfer of the data
1716 * copied to tp->tx_buf[entry] above. Use a memory barrier
1717 * to make sure that the device sees the updated data.
1718 */
1719 wmb();
1720 RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
1721 tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
1722
1723 tp->cur_tx++;
1724
1725 if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
1726 netif_stop_queue (dev);
1727 spin_unlock_irqrestore(&tp->lock, flags);
1728
1729 netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n",
1730 len, entry);
1731
1732 return NETDEV_TX_OK;
1733}
1734
1735
1736static void rtl8139_tx_interrupt (struct net_device *dev,
1737 struct rtl8139_private *tp,
1738 void __iomem *ioaddr)
1739{
1740 unsigned long dirty_tx, tx_left;
1741
1742 assert (dev != NULL);
1743 assert (ioaddr != NULL);
1744
1745 dirty_tx = tp->dirty_tx;
1746 tx_left = tp->cur_tx - dirty_tx;
1747 while (tx_left > 0) {
1748 int entry = dirty_tx % NUM_TX_DESC;
1749 int txstatus;
1750
1751 txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
1752
1753 if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
1754 break; /* It still hasn't been Txed */
1755
1756 /* Note: TxCarrierLost is always asserted at 100mbps. */
1757 if (txstatus & (TxOutOfWindow | TxAborted)) {
1758 /* There was an major error, log it. */
1759 netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n",
1760 txstatus);
1761 dev->stats.tx_errors++;
1762 if (txstatus & TxAborted) {
1763 dev->stats.tx_aborted_errors++;
1764 RTL_W32 (TxConfig, TxClearAbt);
1765 RTL_W16 (IntrStatus, TxErr);
1766 wmb();
1767 }
1768 if (txstatus & TxCarrierLost)
1769 dev->stats.tx_carrier_errors++;
1770 if (txstatus & TxOutOfWindow)
1771 dev->stats.tx_window_errors++;
1772 } else {
1773 if (txstatus & TxUnderrun) {
1774 /* Add 64 to the Tx FIFO threshold. */
1775 if (tp->tx_flag < 0x00300000)
1776 tp->tx_flag += 0x00020000;
1777 dev->stats.tx_fifo_errors++;
1778 }
1779 dev->stats.collisions += (txstatus >> 24) & 15;
1780 dev->stats.tx_bytes += txstatus & 0x7ff;
1781 dev->stats.tx_packets++;
1782 }
1783
1784 dirty_tx++;
1785 tx_left--;
1786 }
1787
1788#ifndef RTL8139_NDEBUG
1789 if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
1790 netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n",
1791 dirty_tx, tp->cur_tx);
1792 dirty_tx += NUM_TX_DESC;
1793 }
1794#endif /* RTL8139_NDEBUG */
1795
1796 /* only wake the queue if we did work, and the queue is stopped */
1797 if (tp->dirty_tx != dirty_tx) {
1798 tp->dirty_tx = dirty_tx;
1799 mb();
1800 netif_wake_queue (dev);
1801 }
1802}
1803
1804
1805/* TODO: clean this up! Rx reset need not be this intensive */
1806static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
1807 struct rtl8139_private *tp, void __iomem *ioaddr)
1808{
1809 u8 tmp8;
1810#ifdef CONFIG_8139_OLD_RX_RESET
1811 int tmp_work;
1812#endif
1813
1814 netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n",
1815 rx_status);
1816 dev->stats.rx_errors++;
1817 if (!(rx_status & RxStatusOK)) {
1818 if (rx_status & RxTooLong) {
1819 netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
1820 rx_status);
1821 /* A.C.: The chip hangs here. */
1822 }
1823 if (rx_status & (RxBadSymbol | RxBadAlign))
1824 dev->stats.rx_frame_errors++;
1825 if (rx_status & (RxRunt | RxTooLong))
1826 dev->stats.rx_length_errors++;
1827 if (rx_status & RxCRCErr)
1828 dev->stats.rx_crc_errors++;
1829 } else {
1830 tp->xstats.rx_lost_in_ring++;
1831 }
1832
1833#ifndef CONFIG_8139_OLD_RX_RESET
1834 tmp8 = RTL_R8 (ChipCmd);
1835 RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
1836 RTL_W8 (ChipCmd, tmp8);
1837 RTL_W32 (RxConfig, tp->rx_config);
1838 tp->cur_rx = 0;
1839#else
1840 /* Reset the receiver, based on RealTek recommendation. (Bug?) */
1841
1842 /* disable receive */
1843 RTL_W8_F (ChipCmd, CmdTxEnb);
1844 tmp_work = 200;
1845 while (--tmp_work > 0) {
1846 udelay(1);
1847 tmp8 = RTL_R8 (ChipCmd);
1848 if (!(tmp8 & CmdRxEnb))
1849 break;
1850 }
1851 if (tmp_work <= 0)
1852 netdev_warn(dev, "rx stop wait too long\n");
1853 /* restart receive */
1854 tmp_work = 200;
1855 while (--tmp_work > 0) {
1856 RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
1857 udelay(1);
1858 tmp8 = RTL_R8 (ChipCmd);
1859 if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
1860 break;
1861 }
1862 if (tmp_work <= 0)
1863 netdev_warn(dev, "tx/rx enable wait too long\n");
1864
1865 /* and reinitialize all rx related registers */
1866 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1867 /* Must enable Tx/Rx before setting transfer thresholds! */
1868 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1869
1870 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1871 RTL_W32 (RxConfig, tp->rx_config);
1872 tp->cur_rx = 0;
1873
1874 netdev_dbg(dev, "init buffer addresses\n");
1875
1876 /* Lock Config[01234] and BMCR register writes */
1877 RTL_W8 (Cfg9346, Cfg9346_Lock);
1878
1879 /* init Rx ring buffer DMA address */
1880 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1881
1882 /* A.C.: Reset the multicast list. */
1883 __set_rx_mode (dev);
1884#endif
1885}
1886
1887#if RX_BUF_IDX == 3
1888static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
1889 u32 offset, unsigned int size)
1890{
1891 u32 left = RX_BUF_LEN - offset;
1892
1893 if (size > left) {
1894 skb_copy_to_linear_data(skb, ring + offset, left);
1895 skb_copy_to_linear_data_offset(skb, left, ring, size - left);
1896 } else
1897 skb_copy_to_linear_data(skb, ring + offset, size);
1898}
1899#endif
1900
1901static void rtl8139_isr_ack(struct rtl8139_private *tp)
1902{
1903 void __iomem *ioaddr = tp->mmio_addr;
1904 u16 status;
1905
1906 status = RTL_R16 (IntrStatus) & RxAckBits;
1907
1908 /* Clear out errors and receive interrupts */
1909 if (likely(status != 0)) {
1910 if (unlikely(status & (RxFIFOOver | RxOverflow))) {
1911 tp->dev->stats.rx_errors++;
1912 if (status & RxFIFOOver)
1913 tp->dev->stats.rx_fifo_errors++;
1914 }
1915 RTL_W16_F (IntrStatus, RxAckBits);
1916 }
1917}
1918
1919static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
1920 int budget)
1921{
1922 void __iomem *ioaddr = tp->mmio_addr;
1923 int received = 0;
1924 unsigned char *rx_ring = tp->rx_ring;
1925 unsigned int cur_rx = tp->cur_rx;
1926 unsigned int rx_size = 0;
1927
1928 netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
1929 __func__, (u16)cur_rx,
1930 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
1931
1932 while (netif_running(dev) && received < budget &&
1933 (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
1934 u32 ring_offset = cur_rx % RX_BUF_LEN;
1935 u32 rx_status;
1936 unsigned int pkt_size;
1937 struct sk_buff *skb;
1938
1939 rmb();
1940
1941 /* read size+status of next frame from DMA ring buffer */
1942 rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
1943 rx_size = rx_status >> 16;
1944 pkt_size = rx_size - 4;
1945
1946 netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
1947 __func__, rx_status, rx_size, cur_rx);
1948#if RTL8139_DEBUG > 2
1949 print_hex_dump(KERN_DEBUG, "Frame contents: ",
1950 DUMP_PREFIX_OFFSET, 16, 1,
1951 &rx_ring[ring_offset], 70, true);
1952#endif
1953
1954 /* Packet copy from FIFO still in progress.
1955 * Theoretically, this should never happen
1956 * since EarlyRx is disabled.
1957 */
1958 if (unlikely(rx_size == 0xfff0)) {
1959 if (!tp->fifo_copy_timeout)
1960 tp->fifo_copy_timeout = jiffies + 2;
1961 else if (time_after(jiffies, tp->fifo_copy_timeout)) {
1962 netdev_dbg(dev, "hung FIFO. Reset\n");
1963 rx_size = 0;
1964 goto no_early_rx;
1965 }
1966 netif_dbg(tp, intr, dev, "fifo copy in progress\n");
1967 tp->xstats.early_rx++;
1968 break;
1969 }
1970
1971no_early_rx:
1972 tp->fifo_copy_timeout = 0;
1973
1974 /* If Rx err or invalid rx_size/rx_status received
1975 * (which happens if we get lost in the ring),
1976 * Rx process gets reset, so we abort any further
1977 * Rx processing.
1978 */
1979 if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
1980 (rx_size < 8) ||
1981 (!(rx_status & RxStatusOK)))) {
1982 rtl8139_rx_err (rx_status, dev, tp, ioaddr);
1983 received = -1;
1984 goto out;
1985 }
1986
1987 /* Malloc up new buffer, compatible with net-2e. */
1988 /* Omit the four octet CRC from the length. */
1989
1990 skb = netdev_alloc_skb_ip_align(dev, pkt_size);
1991 if (likely(skb)) {
1992#if RX_BUF_IDX == 3
1993 wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
1994#else
1995 skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
1996#endif
1997 skb_put (skb, pkt_size);
1998
1999 skb->protocol = eth_type_trans (skb, dev);
2000
2001 dev->stats.rx_bytes += pkt_size;
2002 dev->stats.rx_packets++;
2003
2004 netif_receive_skb (skb);
2005 } else {
2006 if (net_ratelimit())
2007 netdev_warn(dev, "Memory squeeze, dropping packet\n");
2008 dev->stats.rx_dropped++;
2009 }
2010 received++;
2011
2012 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
2013 RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
2014
2015 rtl8139_isr_ack(tp);
2016 }
2017
2018 if (unlikely(!received || rx_size == 0xfff0))
2019 rtl8139_isr_ack(tp);
2020
2021 netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
2022 __func__, cur_rx,
2023 RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
2024
2025 tp->cur_rx = cur_rx;
2026
2027 /*
2028 * The receive buffer should be mostly empty.
2029 * Tell NAPI to reenable the Rx irq.
2030 */
2031 if (tp->fifo_copy_timeout)
2032 received = budget;
2033
2034out:
2035 return received;
2036}
2037
2038
2039static void rtl8139_weird_interrupt (struct net_device *dev,
2040 struct rtl8139_private *tp,
2041 void __iomem *ioaddr,
2042 int status, int link_changed)
2043{
2044 netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status);
2045
2046 assert (dev != NULL);
2047 assert (tp != NULL);
2048 assert (ioaddr != NULL);
2049
2050 /* Update the error count. */
2051 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2052 RTL_W32 (RxMissed, 0);
2053
2054 if ((status & RxUnderrun) && link_changed &&
2055 (tp->drv_flags & HAS_LNK_CHNG)) {
2056 rtl_check_media(dev, 0);
2057 status &= ~RxUnderrun;
2058 }
2059
2060 if (status & (RxUnderrun | RxErr))
2061 dev->stats.rx_errors++;
2062
2063 if (status & PCSTimeout)
2064 dev->stats.rx_length_errors++;
2065 if (status & RxUnderrun)
2066 dev->stats.rx_fifo_errors++;
2067 if (status & PCIErr) {
2068 u16 pci_cmd_status;
2069 pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
2070 pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
2071
2072 netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
2073 }
2074}
2075
2076static int rtl8139_poll(struct napi_struct *napi, int budget)
2077{
2078 struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
2079 struct net_device *dev = tp->dev;
2080 void __iomem *ioaddr = tp->mmio_addr;
2081 int work_done;
2082
2083 spin_lock(&tp->rx_lock);
2084 work_done = 0;
2085 if (likely(RTL_R16(IntrStatus) & RxAckBits))
2086 work_done += rtl8139_rx(dev, tp, budget);
2087
2088 if (work_done < budget) {
2089 unsigned long flags;
2090 /*
2091 * Order is important since data can get interrupted
2092 * again when we think we are done.
2093 */
2094 spin_lock_irqsave(&tp->lock, flags);
2095 __napi_complete(napi);
2096 RTL_W16_F(IntrMask, rtl8139_intr_mask);
2097 spin_unlock_irqrestore(&tp->lock, flags);
2098 }
2099 spin_unlock(&tp->rx_lock);
2100
2101 return work_done;
2102}
2103
2104/* The interrupt handler does all of the Rx thread work and cleans up
2105 after the Tx thread. */
2106static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
2107{
2108 struct net_device *dev = (struct net_device *) dev_instance;
2109 struct rtl8139_private *tp = netdev_priv(dev);
2110 void __iomem *ioaddr = tp->mmio_addr;
2111 u16 status, ackstat;
2112 int link_changed = 0; /* avoid bogus "uninit" warning */
2113 int handled = 0;
2114
2115 spin_lock (&tp->lock);
2116 status = RTL_R16 (IntrStatus);
2117
2118 /* shared irq? */
2119 if (unlikely((status & rtl8139_intr_mask) == 0))
2120 goto out;
2121
2122 handled = 1;
2123
2124 /* h/w no longer present (hotplug?) or major error, bail */
2125 if (unlikely(status == 0xFFFF))
2126 goto out;
2127
2128 /* close possible race's with dev_close */
2129 if (unlikely(!netif_running(dev))) {
2130 RTL_W16 (IntrMask, 0);
2131 goto out;
2132 }
2133
2134 /* Acknowledge all of the current interrupt sources ASAP, but
2135 an first get an additional status bit from CSCR. */
2136 if (unlikely(status & RxUnderrun))
2137 link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
2138
2139 ackstat = status & ~(RxAckBits | TxErr);
2140 if (ackstat)
2141 RTL_W16 (IntrStatus, ackstat);
2142
2143 /* Receive packets are processed by poll routine.
2144 If not running start it now. */
2145 if (status & RxAckBits){
2146 if (napi_schedule_prep(&tp->napi)) {
2147 RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
2148 __napi_schedule(&tp->napi);
2149 }
2150 }
2151
2152 /* Check uncommon events with one test. */
2153 if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
2154 rtl8139_weird_interrupt (dev, tp, ioaddr,
2155 status, link_changed);
2156
2157 if (status & (TxOK | TxErr)) {
2158 rtl8139_tx_interrupt (dev, tp, ioaddr);
2159 if (status & TxErr)
2160 RTL_W16 (IntrStatus, TxErr);
2161 }
2162 out:
2163 spin_unlock (&tp->lock);
2164
2165 netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n",
2166 RTL_R16(IntrStatus));
2167 return IRQ_RETVAL(handled);
2168}
2169
2170#ifdef CONFIG_NET_POLL_CONTROLLER
2171/*
2172 * Polling receive - used by netconsole and other diagnostic tools
2173 * to allow network i/o with interrupts disabled.
2174 */
2175static void rtl8139_poll_controller(struct net_device *dev)
2176{
2177 disable_irq(dev->irq);
2178 rtl8139_interrupt(dev->irq, dev);
2179 enable_irq(dev->irq);
2180}
2181#endif
2182
2183static int rtl8139_set_mac_address(struct net_device *dev, void *p)
2184{
2185 struct rtl8139_private *tp = netdev_priv(dev);
2186 void __iomem *ioaddr = tp->mmio_addr;
2187 struct sockaddr *addr = p;
2188
2189 if (!is_valid_ether_addr(addr->sa_data))
2190 return -EADDRNOTAVAIL;
2191
2192 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
2193
2194 spin_lock_irq(&tp->lock);
2195
2196 RTL_W8_F(Cfg9346, Cfg9346_Unlock);
2197 RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
2198 RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
2199 RTL_W8_F(Cfg9346, Cfg9346_Lock);
2200
2201 spin_unlock_irq(&tp->lock);
2202
2203 return 0;
2204}
2205
2206static int rtl8139_close (struct net_device *dev)
2207{
2208 struct rtl8139_private *tp = netdev_priv(dev);
2209 void __iomem *ioaddr = tp->mmio_addr;
2210 unsigned long flags;
2211
2212 netif_stop_queue(dev);
2213 napi_disable(&tp->napi);
2214
2215 netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n",
2216 RTL_R16(IntrStatus));
2217
2218 spin_lock_irqsave (&tp->lock, flags);
2219
2220 /* Stop the chip's Tx and Rx DMA processes. */
2221 RTL_W8 (ChipCmd, 0);
2222
2223 /* Disable interrupts by clearing the interrupt mask. */
2224 RTL_W16 (IntrMask, 0);
2225
2226 /* Update the error counts. */
2227 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2228 RTL_W32 (RxMissed, 0);
2229
2230 spin_unlock_irqrestore (&tp->lock, flags);
2231
2232 free_irq (dev->irq, dev);
2233
2234 rtl8139_tx_clear (tp);
2235
2236 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
2237 tp->rx_ring, tp->rx_ring_dma);
2238 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
2239 tp->tx_bufs, tp->tx_bufs_dma);
2240 tp->rx_ring = NULL;
2241 tp->tx_bufs = NULL;
2242
2243 /* Green! Put the chip in low-power mode. */
2244 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2245
2246 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
2247 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
2248
2249 return 0;
2250}
2251
2252
2253/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
2254 kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
2255 other threads or interrupts aren't messing with the 8139. */
2256static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2257{
2258 struct rtl8139_private *tp = netdev_priv(dev);
2259 void __iomem *ioaddr = tp->mmio_addr;
2260
2261 spin_lock_irq(&tp->lock);
2262 if (rtl_chip_info[tp->chipset].flags & HasLWake) {
2263 u8 cfg3 = RTL_R8 (Config3);
2264 u8 cfg5 = RTL_R8 (Config5);
2265
2266 wol->supported = WAKE_PHY | WAKE_MAGIC
2267 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
2268
2269 wol->wolopts = 0;
2270 if (cfg3 & Cfg3_LinkUp)
2271 wol->wolopts |= WAKE_PHY;
2272 if (cfg3 & Cfg3_Magic)
2273 wol->wolopts |= WAKE_MAGIC;
2274 /* (KON)FIXME: See how netdev_set_wol() handles the
2275 following constants. */
2276 if (cfg5 & Cfg5_UWF)
2277 wol->wolopts |= WAKE_UCAST;
2278 if (cfg5 & Cfg5_MWF)
2279 wol->wolopts |= WAKE_MCAST;
2280 if (cfg5 & Cfg5_BWF)
2281 wol->wolopts |= WAKE_BCAST;
2282 }
2283 spin_unlock_irq(&tp->lock);
2284}
2285
2286
2287/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
2288 that wol points to kernel memory and other threads or interrupts
2289 aren't messing with the 8139. */
2290static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2291{
2292 struct rtl8139_private *tp = netdev_priv(dev);
2293 void __iomem *ioaddr = tp->mmio_addr;
2294 u32 support;
2295 u8 cfg3, cfg5;
2296
2297 support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
2298 ? (WAKE_PHY | WAKE_MAGIC
2299 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
2300 : 0);
2301 if (wol->wolopts & ~support)
2302 return -EINVAL;
2303
2304 spin_lock_irq(&tp->lock);
2305 cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
2306 if (wol->wolopts & WAKE_PHY)
2307 cfg3 |= Cfg3_LinkUp;
2308 if (wol->wolopts & WAKE_MAGIC)
2309 cfg3 |= Cfg3_Magic;
2310 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2311 RTL_W8 (Config3, cfg3);
2312 RTL_W8 (Cfg9346, Cfg9346_Lock);
2313
2314 cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
2315 /* (KON)FIXME: These are untested. We may have to set the
2316 CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
2317 documentation. */
2318 if (wol->wolopts & WAKE_UCAST)
2319 cfg5 |= Cfg5_UWF;
2320 if (wol->wolopts & WAKE_MCAST)
2321 cfg5 |= Cfg5_MWF;
2322 if (wol->wolopts & WAKE_BCAST)
2323 cfg5 |= Cfg5_BWF;
2324 RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
2325 spin_unlock_irq(&tp->lock);
2326
2327 return 0;
2328}
2329
2330static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2331{
2332 struct rtl8139_private *tp = netdev_priv(dev);
2333 strcpy(info->driver, DRV_NAME);
2334 strcpy(info->version, DRV_VERSION);
2335 strcpy(info->bus_info, pci_name(tp->pci_dev));
2336 info->regdump_len = tp->regs_len;
2337}
2338
2339static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2340{
2341 struct rtl8139_private *tp = netdev_priv(dev);
2342 spin_lock_irq(&tp->lock);
2343 mii_ethtool_gset(&tp->mii, cmd);
2344 spin_unlock_irq(&tp->lock);
2345 return 0;
2346}
2347
2348static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2349{
2350 struct rtl8139_private *tp = netdev_priv(dev);
2351 int rc;
2352 spin_lock_irq(&tp->lock);
2353 rc = mii_ethtool_sset(&tp->mii, cmd);
2354 spin_unlock_irq(&tp->lock);
2355 return rc;
2356}
2357
2358static int rtl8139_nway_reset(struct net_device *dev)
2359{
2360 struct rtl8139_private *tp = netdev_priv(dev);
2361 return mii_nway_restart(&tp->mii);
2362}
2363
2364static u32 rtl8139_get_link(struct net_device *dev)
2365{
2366 struct rtl8139_private *tp = netdev_priv(dev);
2367 return mii_link_ok(&tp->mii);
2368}
2369
2370static u32 rtl8139_get_msglevel(struct net_device *dev)
2371{
2372 struct rtl8139_private *tp = netdev_priv(dev);
2373 return tp->msg_enable;
2374}
2375
2376static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
2377{
2378 struct rtl8139_private *tp = netdev_priv(dev);
2379 tp->msg_enable = datum;
2380}
2381
2382static int rtl8139_get_regs_len(struct net_device *dev)
2383{
2384 struct rtl8139_private *tp;
2385 /* TODO: we are too slack to do reg dumping for pio, for now */
2386 if (use_io)
2387 return 0;
2388 tp = netdev_priv(dev);
2389 return tp->regs_len;
2390}
2391
2392static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
2393{
2394 struct rtl8139_private *tp;
2395
2396 /* TODO: we are too slack to do reg dumping for pio, for now */
2397 if (use_io)
2398 return;
2399 tp = netdev_priv(dev);
2400
2401 regs->version = RTL_REGS_VER;
2402
2403 spin_lock_irq(&tp->lock);
2404 memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
2405 spin_unlock_irq(&tp->lock);
2406}
2407
2408static int rtl8139_get_sset_count(struct net_device *dev, int sset)
2409{
2410 switch (sset) {
2411 case ETH_SS_STATS:
2412 return RTL_NUM_STATS;
2413 default:
2414 return -EOPNOTSUPP;
2415 }
2416}
2417
2418static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
2419{
2420 struct rtl8139_private *tp = netdev_priv(dev);
2421
2422 data[0] = tp->xstats.early_rx;
2423 data[1] = tp->xstats.tx_buf_mapped;
2424 data[2] = tp->xstats.tx_timeouts;
2425 data[3] = tp->xstats.rx_lost_in_ring;
2426}
2427
2428static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
2429{
2430 memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
2431}
2432
2433static const struct ethtool_ops rtl8139_ethtool_ops = {
2434 .get_drvinfo = rtl8139_get_drvinfo,
2435 .get_settings = rtl8139_get_settings,
2436 .set_settings = rtl8139_set_settings,
2437 .get_regs_len = rtl8139_get_regs_len,
2438 .get_regs = rtl8139_get_regs,
2439 .nway_reset = rtl8139_nway_reset,
2440 .get_link = rtl8139_get_link,
2441 .get_msglevel = rtl8139_get_msglevel,
2442 .set_msglevel = rtl8139_set_msglevel,
2443 .get_wol = rtl8139_get_wol,
2444 .set_wol = rtl8139_set_wol,
2445 .get_strings = rtl8139_get_strings,
2446 .get_sset_count = rtl8139_get_sset_count,
2447 .get_ethtool_stats = rtl8139_get_ethtool_stats,
2448};
2449
2450static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2451{
2452 struct rtl8139_private *tp = netdev_priv(dev);
2453 int rc;
2454
2455 if (!netif_running(dev))
2456 return -EINVAL;
2457
2458 spin_lock_irq(&tp->lock);
2459 rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
2460 spin_unlock_irq(&tp->lock);
2461
2462 return rc;
2463}
2464
2465
2466static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
2467{
2468 struct rtl8139_private *tp = netdev_priv(dev);
2469 void __iomem *ioaddr = tp->mmio_addr;
2470 unsigned long flags;
2471
2472 if (netif_running(dev)) {
2473 spin_lock_irqsave (&tp->lock, flags);
2474 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2475 RTL_W32 (RxMissed, 0);
2476 spin_unlock_irqrestore (&tp->lock, flags);
2477 }
2478
2479 return &dev->stats;
2480}
2481
2482/* Set or clear the multicast filter for this adaptor.
2483 This routine is not state sensitive and need not be SMP locked. */
2484
2485static void __set_rx_mode (struct net_device *dev)
2486{
2487 struct rtl8139_private *tp = netdev_priv(dev);
2488 void __iomem *ioaddr = tp->mmio_addr;
2489 u32 mc_filter[2]; /* Multicast hash filter */
2490 int rx_mode;
2491 u32 tmp;
2492
2493 netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08x\n",
2494 dev->flags, RTL_R32(RxConfig));
2495
2496 /* Note: do not reorder, GCC is clever about common statements. */
2497 if (dev->flags & IFF_PROMISC) {
2498 rx_mode =
2499 AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
2500 AcceptAllPhys;
2501 mc_filter[1] = mc_filter[0] = 0xffffffff;
2502 } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
2503 (dev->flags & IFF_ALLMULTI)) {
2504 /* Too many to filter perfectly -- accept all multicasts. */
2505 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
2506 mc_filter[1] = mc_filter[0] = 0xffffffff;
2507 } else {
2508 struct netdev_hw_addr *ha;
2509 rx_mode = AcceptBroadcast | AcceptMyPhys;
2510 mc_filter[1] = mc_filter[0] = 0;
2511 netdev_for_each_mc_addr(ha, dev) {
2512 int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
2513
2514 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
2515 rx_mode |= AcceptMulticast;
2516 }
2517 }
2518
2519 /* We can safely update without stopping the chip. */
2520 tmp = rtl8139_rx_config | rx_mode;
2521 if (tp->rx_config != tmp) {
2522 RTL_W32_F (RxConfig, tmp);
2523 tp->rx_config = tmp;
2524 }
2525 RTL_W32_F (MAR0 + 0, mc_filter[0]);
2526 RTL_W32_F (MAR0 + 4, mc_filter[1]);
2527}
2528
2529static void rtl8139_set_rx_mode (struct net_device *dev)
2530{
2531 unsigned long flags;
2532 struct rtl8139_private *tp = netdev_priv(dev);
2533
2534 spin_lock_irqsave (&tp->lock, flags);
2535 __set_rx_mode(dev);
2536 spin_unlock_irqrestore (&tp->lock, flags);
2537}
2538
2539#ifdef CONFIG_PM
2540
2541static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
2542{
2543 struct net_device *dev = pci_get_drvdata (pdev);
2544 struct rtl8139_private *tp = netdev_priv(dev);
2545 void __iomem *ioaddr = tp->mmio_addr;
2546 unsigned long flags;
2547
2548 pci_save_state (pdev);
2549
2550 if (!netif_running (dev))
2551 return 0;
2552
2553 netif_device_detach (dev);
2554
2555 spin_lock_irqsave (&tp->lock, flags);
2556
2557 /* Disable interrupts, stop Tx and Rx. */
2558 RTL_W16 (IntrMask, 0);
2559 RTL_W8 (ChipCmd, 0);
2560
2561 /* Update the error counts. */
2562 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2563 RTL_W32 (RxMissed, 0);
2564
2565 spin_unlock_irqrestore (&tp->lock, flags);
2566
2567 pci_set_power_state (pdev, PCI_D3hot);
2568
2569 return 0;
2570}
2571
2572
2573static int rtl8139_resume (struct pci_dev *pdev)
2574{
2575 struct net_device *dev = pci_get_drvdata (pdev);
2576
2577 pci_restore_state (pdev);
2578 if (!netif_running (dev))
2579 return 0;
2580 pci_set_power_state (pdev, PCI_D0);
2581 rtl8139_init_ring (dev);
2582 rtl8139_hw_start (dev);
2583 netif_device_attach (dev);
2584 return 0;
2585}
2586
2587#endif /* CONFIG_PM */
2588
2589
2590static struct pci_driver rtl8139_pci_driver = {
2591 .name = DRV_NAME,
2592 .id_table = rtl8139_pci_tbl,
2593 .probe = rtl8139_init_one,
2594 .remove = __devexit_p(rtl8139_remove_one),
2595#ifdef CONFIG_PM
2596 .suspend = rtl8139_suspend,
2597 .resume = rtl8139_resume,
2598#endif /* CONFIG_PM */
2599};
2600
2601
2602static int __init rtl8139_init_module (void)
2603{
2604 /* when we're a module, we always print a version message,
2605 * even if no 8139 board is found.
2606 */
2607#ifdef MODULE
2608 pr_info(RTL8139_DRIVER_NAME "\n");
2609#endif
2610
2611 return pci_register_driver(&rtl8139_pci_driver);
2612}
2613
2614
2615static void __exit rtl8139_cleanup_module (void)
2616{
2617 pci_unregister_driver (&rtl8139_pci_driver);
2618}
2619
2620
2621module_init(rtl8139_init_module);
2622module_exit(rtl8139_cleanup_module);