Linux Audio

Check our new training course

Loading...
Note: File does not exist in v3.1.
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 *  cpuidle-pseries - idle state cpuidle driver.
  4 *  Adapted from drivers/idle/intel_idle.c and
  5 *  drivers/acpi/processor_idle.c
  6 *
  7 */
  8
  9#include <linux/kernel.h>
 10#include <linux/module.h>
 11#include <linux/init.h>
 12#include <linux/moduleparam.h>
 13#include <linux/cpuidle.h>
 14#include <linux/cpu.h>
 15#include <linux/notifier.h>
 16
 17#include <asm/paca.h>
 18#include <asm/reg.h>
 19#include <asm/machdep.h>
 20#include <asm/firmware.h>
 21#include <asm/runlatch.h>
 22#include <asm/idle.h>
 23#include <asm/plpar_wrappers.h>
 24#include <asm/rtas.h>
 25
 26static struct cpuidle_driver pseries_idle_driver = {
 27	.name             = "pseries_idle",
 28	.owner            = THIS_MODULE,
 29};
 30
 31static int max_idle_state __read_mostly;
 32static struct cpuidle_state *cpuidle_state_table __read_mostly;
 33static u64 snooze_timeout __read_mostly;
 34static bool snooze_timeout_en __read_mostly;
 35
 36static __cpuidle
 37int snooze_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 38		int index)
 39{
 40	u64 snooze_exit_time;
 41
 42	set_thread_flag(TIF_POLLING_NRFLAG);
 43
 44	pseries_idle_prolog();
 45	raw_local_irq_enable();
 46	snooze_exit_time = get_tb() + snooze_timeout;
 47	dev->poll_time_limit = false;
 48
 49	while (!need_resched()) {
 50		HMT_low();
 51		HMT_very_low();
 52		if (likely(snooze_timeout_en) && get_tb() > snooze_exit_time) {
 53			/*
 54			 * Task has not woken up but we are exiting the polling
 55			 * loop anyway. Require a barrier after polling is
 56			 * cleared to order subsequent test of need_resched().
 57			 */
 58			dev->poll_time_limit = true;
 59			clear_thread_flag(TIF_POLLING_NRFLAG);
 60			smp_mb();
 61			break;
 62		}
 63	}
 64
 65	HMT_medium();
 66	clear_thread_flag(TIF_POLLING_NRFLAG);
 67
 68	raw_local_irq_disable();
 69
 70	pseries_idle_epilog();
 71
 72	return index;
 73}
 74
 75static __cpuidle void check_and_cede_processor(void)
 76{
 77	/*
 78	 * Ensure our interrupt state is properly tracked,
 79	 * also checks if no interrupt has occurred while we
 80	 * were soft-disabled
 81	 */
 82	if (prep_irq_for_idle()) {
 83		cede_processor();
 84#ifdef CONFIG_TRACE_IRQFLAGS
 85		/* Ensure that H_CEDE returns with IRQs on */
 86		if (WARN_ON(!(mfmsr() & MSR_EE)))
 87			__hard_irq_enable();
 88#endif
 89	}
 90}
 91
 92/*
 93 * XCEDE: Extended CEDE states discovered through the
 94 *        "ibm,get-systems-parameter" RTAS call with the token
 95 *        CEDE_LATENCY_TOKEN
 96 */
 97
 98/*
 99 * Section 7.3.16 System Parameters Option of PAPR version 2.8.1 has a
100 * table with all the parameters to ibm,get-system-parameters.
101 * CEDE_LATENCY_TOKEN corresponds to the token value for Cede Latency
102 * Settings Information.
103 */
104#define CEDE_LATENCY_TOKEN	45
105
106/*
107 * If the platform supports the cede latency settings information system
108 * parameter it must provide the following information in the NULL terminated
109 * parameter string:
110 *
111 * a. The first byte is the length ā€œNā€ of each cede latency setting record minus
112 *    one (zero indicates a length of 1 byte).
113 *
114 * b. For each supported cede latency setting a cede latency setting record
115 *    consisting of the first ā€œNā€ bytes as per the following table.
116 *
117 *    -----------------------------
118 *    | Field           | Field   |
119 *    | Name            | Length  |
120 *    -----------------------------
121 *    | Cede Latency    | 1 Byte  |
122 *    | Specifier Value |         |
123 *    -----------------------------
124 *    | Maximum wakeup  |         |
125 *    | latency in      | 8 Bytes |
126 *    | tb-ticks        |         |
127 *    -----------------------------
128 *    | Responsive to   |         |
129 *    | external        | 1 Byte  |
130 *    | interrupts      |         |
131 *    -----------------------------
132 *
133 * This version has cede latency record size = 10.
134 *
135 * The structure xcede_latency_payload represents a) and b) with
136 * xcede_latency_record representing the table in b).
137 *
138 * xcede_latency_parameter is what gets returned by
139 * ibm,get-systems-parameter RTAS call when made with
140 * CEDE_LATENCY_TOKEN.
141 *
142 * These structures are only used to represent the data obtained by the RTAS
143 * call. The data is in big-endian.
144 */
145struct xcede_latency_record {
146	u8	hint;
147	__be64	latency_ticks;
148	u8	wake_on_irqs;
149} __packed;
150
151// Make space for 16 records, which "should be enough".
152struct xcede_latency_payload {
153	u8     record_size;
154	struct xcede_latency_record records[16];
155} __packed;
156
157struct xcede_latency_parameter {
158	__be16  payload_size;
159	struct xcede_latency_payload payload;
160	u8 null_char;
161} __packed;
162
163static unsigned int nr_xcede_records;
164static struct xcede_latency_parameter xcede_latency_parameter __initdata;
165
166static int __init parse_cede_parameters(void)
167{
168	struct xcede_latency_payload *payload;
169	u32 total_xcede_records_size;
170	u8 xcede_record_size;
171	u16 payload_size;
172	int ret, i;
173
174	ret = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
175			NULL, CEDE_LATENCY_TOKEN, __pa(&xcede_latency_parameter),
176			sizeof(xcede_latency_parameter));
177	if (ret) {
178		pr_err("xcede: Error parsing CEDE_LATENCY_TOKEN\n");
179		return ret;
180	}
181
182	payload_size = be16_to_cpu(xcede_latency_parameter.payload_size);
183	payload = &xcede_latency_parameter.payload;
184
185	xcede_record_size = payload->record_size + 1;
186
187	if (xcede_record_size != sizeof(struct xcede_latency_record)) {
188		pr_err("xcede: Expected record-size %lu. Observed size %u.\n",
189		       sizeof(struct xcede_latency_record), xcede_record_size);
190		return -EINVAL;
191	}
192
193	pr_info("xcede: xcede_record_size = %d\n", xcede_record_size);
194
195	/*
196	 * Since the payload_size includes the last NULL byte and the
197	 * xcede_record_size, the remaining bytes correspond to array of all
198	 * cede_latency settings.
199	 */
200	total_xcede_records_size = payload_size - 2;
201	nr_xcede_records = total_xcede_records_size / xcede_record_size;
202
203	for (i = 0; i < nr_xcede_records; i++) {
204		struct xcede_latency_record *record = &payload->records[i];
205		u64 latency_ticks = be64_to_cpu(record->latency_ticks);
206		u8 wake_on_irqs = record->wake_on_irqs;
207		u8 hint = record->hint;
208
209		pr_info("xcede: Record %d : hint = %u, latency = 0x%llx tb ticks, Wake-on-irq = %u\n",
210			i, hint, latency_ticks, wake_on_irqs);
211	}
212
213	return 0;
214}
215
216#define NR_DEDICATED_STATES	2 /* snooze, CEDE */
217static u8 cede_latency_hint[NR_DEDICATED_STATES];
218
219static __cpuidle
220int dedicated_cede_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv,
221			int index)
222{
223	u8 old_latency_hint;
224
225	pseries_idle_prolog();
226	get_lppaca()->donate_dedicated_cpu = 1;
227	old_latency_hint = get_lppaca()->cede_latency_hint;
228	get_lppaca()->cede_latency_hint = cede_latency_hint[index];
229
230	HMT_medium();
231	check_and_cede_processor();
232
233	raw_local_irq_disable();
234	get_lppaca()->donate_dedicated_cpu = 0;
235	get_lppaca()->cede_latency_hint = old_latency_hint;
236
237	pseries_idle_epilog();
238
239	return index;
240}
241
242static __cpuidle
243int shared_cede_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv,
244		     int index)
245{
246
247	pseries_idle_prolog();
248
249	/*
250	 * Yield the processor to the hypervisor.  We return if
251	 * an external interrupt occurs (which are driven prior
252	 * to returning here) or if a prod occurs from another
253	 * processor. When returning here, external interrupts
254	 * are enabled.
255	 */
256	check_and_cede_processor();
257
258	raw_local_irq_disable();
259	pseries_idle_epilog();
260
261	return index;
262}
263
264/*
265 * States for dedicated partition case.
266 */
267static struct cpuidle_state dedicated_states[NR_DEDICATED_STATES] = {
268	{ /* Snooze */
269		.name = "snooze",
270		.desc = "snooze",
271		.exit_latency = 0,
272		.target_residency = 0,
273		.enter = &snooze_loop,
274		.flags = CPUIDLE_FLAG_POLLING },
275	{ /* CEDE */
276		.name = "CEDE",
277		.desc = "CEDE",
278		.exit_latency = 10,
279		.target_residency = 100,
280		.enter = &dedicated_cede_loop },
281};
282
283/*
284 * States for shared partition case.
285 */
286static struct cpuidle_state shared_states[] = {
287	{ /* Snooze */
288		.name = "snooze",
289		.desc = "snooze",
290		.exit_latency = 0,
291		.target_residency = 0,
292		.enter = &snooze_loop,
293		.flags = CPUIDLE_FLAG_POLLING },
294	{ /* Shared Cede */
295		.name = "Shared Cede",
296		.desc = "Shared Cede",
297		.exit_latency = 10,
298		.target_residency = 100,
299		.enter = &shared_cede_loop },
300};
301
302static int pseries_cpuidle_cpu_online(unsigned int cpu)
303{
304	struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu);
305
306	if (dev && cpuidle_get_driver()) {
307		cpuidle_pause_and_lock();
308		cpuidle_enable_device(dev);
309		cpuidle_resume_and_unlock();
310	}
311	return 0;
312}
313
314static int pseries_cpuidle_cpu_dead(unsigned int cpu)
315{
316	struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu);
317
318	if (dev && cpuidle_get_driver()) {
319		cpuidle_pause_and_lock();
320		cpuidle_disable_device(dev);
321		cpuidle_resume_and_unlock();
322	}
323	return 0;
324}
325
326/*
327 * pseries_cpuidle_driver_init()
328 */
329static int pseries_cpuidle_driver_init(void)
330{
331	int idle_state;
332	struct cpuidle_driver *drv = &pseries_idle_driver;
333
334	drv->state_count = 0;
335
336	for (idle_state = 0; idle_state < max_idle_state; ++idle_state) {
337		/* Is the state not enabled? */
338		if (cpuidle_state_table[idle_state].enter == NULL)
339			continue;
340
341		drv->states[drv->state_count] =	/* structure copy */
342			cpuidle_state_table[idle_state];
343
344		drv->state_count += 1;
345	}
346
347	return 0;
348}
349
350static void __init fixup_cede0_latency(void)
351{
352	struct xcede_latency_payload *payload;
353	u64 min_xcede_latency_us = UINT_MAX;
354	int i;
355
356	if (parse_cede_parameters())
357		return;
358
359	pr_info("cpuidle: Skipping the %d Extended CEDE idle states\n",
360		nr_xcede_records);
361
362	payload = &xcede_latency_parameter.payload;
363
364	/*
365	 * The CEDE idle state maps to CEDE(0). While the hypervisor
366	 * does not advertise CEDE(0) exit latency values, it does
367	 * advertise the latency values of the extended CEDE states.
368	 * We use the lowest advertised exit latency value as a proxy
369	 * for the exit latency of CEDE(0).
370	 */
371	for (i = 0; i < nr_xcede_records; i++) {
372		struct xcede_latency_record *record = &payload->records[i];
373		u8 hint = record->hint;
374		u64 latency_tb = be64_to_cpu(record->latency_ticks);
375		u64 latency_us = DIV_ROUND_UP_ULL(tb_to_ns(latency_tb), NSEC_PER_USEC);
376
377		/*
378		 * We expect the exit latency of an extended CEDE
379		 * state to be non-zero, it to since it takes at least
380		 * a few nanoseconds to wakeup the idle CPU and
381		 * dispatch the virtual processor into the Linux
382		 * Guest.
383		 *
384		 * So we consider only non-zero value for performing
385		 * the fixup of CEDE(0) latency.
386		 */
387		if (latency_us == 0) {
388			pr_warn("cpuidle: Skipping xcede record %d [hint=%d]. Exit latency = 0us\n",
389				i, hint);
390			continue;
391		}
392
393		if (latency_us < min_xcede_latency_us)
394			min_xcede_latency_us = latency_us;
395	}
396
397	if (min_xcede_latency_us != UINT_MAX) {
398		dedicated_states[1].exit_latency = min_xcede_latency_us;
399		dedicated_states[1].target_residency = 10 * (min_xcede_latency_us);
400		pr_info("cpuidle: Fixed up CEDE exit latency to %llu us\n",
401			min_xcede_latency_us);
402	}
403
404}
405
406/*
407 * pseries_idle_probe()
408 * Choose state table for shared versus dedicated partition
409 */
410static int __init pseries_idle_probe(void)
411{
412
413	if (cpuidle_disable != IDLE_NO_OVERRIDE)
414		return -ENODEV;
415
416	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
417		if (lppaca_shared_proc()) {
418			cpuidle_state_table = shared_states;
419			max_idle_state = ARRAY_SIZE(shared_states);
420		} else {
421			/*
422			 * Use firmware provided latency values
423			 * starting with POWER10 platforms. In the
424			 * case that we are running on a POWER10
425			 * platform but in an earlier compat mode, we
426			 * can still use the firmware provided values.
427			 *
428			 * However, on platforms prior to POWER10, we
429			 * cannot rely on the accuracy of the firmware
430			 * provided latency values. On such platforms,
431			 * go with the conservative default estimate
432			 * of 10us.
433			 */
434			if (cpu_has_feature(CPU_FTR_ARCH_31) || pvr_version_is(PVR_POWER10))
435				fixup_cede0_latency();
436			cpuidle_state_table = dedicated_states;
437			max_idle_state = NR_DEDICATED_STATES;
438		}
439	} else
440		return -ENODEV;
441
442	if (max_idle_state > 1) {
443		snooze_timeout_en = true;
444		snooze_timeout = cpuidle_state_table[1].target_residency *
445				 tb_ticks_per_usec;
446	}
447	return 0;
448}
449
450static int __init pseries_processor_idle_init(void)
451{
452	int retval;
453
454	retval = pseries_idle_probe();
455	if (retval)
456		return retval;
457
458	pseries_cpuidle_driver_init();
459	retval = cpuidle_register(&pseries_idle_driver, NULL);
460	if (retval) {
461		printk(KERN_DEBUG "Registration of pseries driver failed.\n");
462		return retval;
463	}
464
465	retval = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
466					   "cpuidle/pseries:online",
467					   pseries_cpuidle_cpu_online, NULL);
468	WARN_ON(retval < 0);
469	retval = cpuhp_setup_state_nocalls(CPUHP_CPUIDLE_DEAD,
470					   "cpuidle/pseries:DEAD", NULL,
471					   pseries_cpuidle_cpu_dead);
472	WARN_ON(retval < 0);
473	printk(KERN_DEBUG "pseries_idle_driver registered\n");
474	return 0;
475}
476
477device_initcall(pseries_processor_idle_init);