Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * pata_netcell.c - Netcell PATA driver
4 *
5 * (c) 2006 Red Hat
6 */
7
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/pci.h>
11#include <linux/blkdev.h>
12#include <linux/delay.h>
13#include <linux/device.h>
14#include <scsi/scsi_host.h>
15#include <linux/libata.h>
16#include <linux/ata.h>
17
18#define DRV_NAME "pata_netcell"
19#define DRV_VERSION "0.1.7"
20
21/* No PIO or DMA methods needed for this device */
22
23static unsigned int netcell_read_id(struct ata_device *adev,
24 struct ata_taskfile *tf, __le16 *id)
25{
26 unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
27
28 /* Firmware forgets to mark words 85-87 valid */
29 if (err_mask == 0)
30 id[ATA_ID_CSF_DEFAULT] |= cpu_to_le16(0x4000);
31 return err_mask;
32}
33
34static const struct scsi_host_template netcell_sht = {
35 ATA_BMDMA_SHT(DRV_NAME),
36};
37
38static struct ata_port_operations netcell_ops = {
39 .inherits = &ata_bmdma_port_ops,
40 .cable_detect = ata_cable_80wire,
41 .read_id = netcell_read_id,
42};
43
44
45/**
46 * netcell_init_one - Register Netcell ATA PCI device with kernel services
47 * @pdev: PCI device to register
48 * @ent: Entry in netcell_pci_tbl matching with @pdev
49 *
50 * Called from kernel PCI layer.
51 *
52 * LOCKING:
53 * Inherited from PCI layer (may sleep).
54 *
55 * RETURNS:
56 * Zero on success, or -ERRNO value.
57 */
58
59static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
60{
61 static const struct ata_port_info info = {
62 .flags = ATA_FLAG_SLAVE_POSS,
63 /* Actually we don't really care about these as the
64 firmware deals with it */
65 .pio_mask = ATA_PIO4,
66 .mwdma_mask = ATA_MWDMA2,
67 .udma_mask = ATA_UDMA5, /* UDMA 133 */
68 .port_ops = &netcell_ops,
69 };
70 const struct ata_port_info *port_info[] = { &info, NULL };
71 int rc;
72
73 ata_print_version_once(&pdev->dev, DRV_VERSION);
74
75 rc = pcim_enable_device(pdev);
76 if (rc)
77 return rc;
78
79 /* Any chip specific setup/optimisation/messages here */
80 ata_pci_bmdma_clear_simplex(pdev);
81
82 /* And let the library code do the work */
83 return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
84}
85
86static const struct pci_device_id netcell_pci_tbl[] = {
87 { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), },
88
89 { } /* terminate list */
90};
91
92static struct pci_driver netcell_pci_driver = {
93 .name = DRV_NAME,
94 .id_table = netcell_pci_tbl,
95 .probe = netcell_init_one,
96 .remove = ata_pci_remove_one,
97#ifdef CONFIG_PM_SLEEP
98 .suspend = ata_pci_device_suspend,
99 .resume = ata_pci_device_resume,
100#endif
101};
102
103module_pci_driver(netcell_pci_driver);
104
105MODULE_AUTHOR("Alan Cox");
106MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID");
107MODULE_LICENSE("GPL");
108MODULE_DEVICE_TABLE(pci, netcell_pci_tbl);
109MODULE_VERSION(DRV_VERSION);
1/*
2 * pata_netcell.c - Netcell PATA driver
3 *
4 * (c) 2006 Red Hat
5 */
6
7#include <linux/kernel.h>
8#include <linux/module.h>
9#include <linux/pci.h>
10#include <linux/init.h>
11#include <linux/blkdev.h>
12#include <linux/delay.h>
13#include <linux/device.h>
14#include <scsi/scsi_host.h>
15#include <linux/libata.h>
16#include <linux/ata.h>
17
18#define DRV_NAME "pata_netcell"
19#define DRV_VERSION "0.1.7"
20
21/* No PIO or DMA methods needed for this device */
22
23static unsigned int netcell_read_id(struct ata_device *adev,
24 struct ata_taskfile *tf, u16 *id)
25{
26 unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
27 /* Firmware forgets to mark words 85-87 valid */
28 if (err_mask == 0)
29 id[ATA_ID_CSF_DEFAULT] |= 0x4000;
30 return err_mask;
31}
32
33static struct scsi_host_template netcell_sht = {
34 ATA_BMDMA_SHT(DRV_NAME),
35};
36
37static struct ata_port_operations netcell_ops = {
38 .inherits = &ata_bmdma_port_ops,
39 .cable_detect = ata_cable_80wire,
40 .read_id = netcell_read_id,
41};
42
43
44/**
45 * netcell_init_one - Register Netcell ATA PCI device with kernel services
46 * @pdev: PCI device to register
47 * @ent: Entry in netcell_pci_tbl matching with @pdev
48 *
49 * Called from kernel PCI layer.
50 *
51 * LOCKING:
52 * Inherited from PCI layer (may sleep).
53 *
54 * RETURNS:
55 * Zero on success, or -ERRNO value.
56 */
57
58static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
59{
60 static const struct ata_port_info info = {
61 .flags = ATA_FLAG_SLAVE_POSS,
62 /* Actually we don't really care about these as the
63 firmware deals with it */
64 .pio_mask = ATA_PIO4,
65 .mwdma_mask = ATA_MWDMA2,
66 .udma_mask = ATA_UDMA5, /* UDMA 133 */
67 .port_ops = &netcell_ops,
68 };
69 const struct ata_port_info *port_info[] = { &info, NULL };
70 int rc;
71
72 ata_print_version_once(&pdev->dev, DRV_VERSION);
73
74 rc = pcim_enable_device(pdev);
75 if (rc)
76 return rc;
77
78 /* Any chip specific setup/optimisation/messages here */
79 ata_pci_bmdma_clear_simplex(pdev);
80
81 /* And let the library code do the work */
82 return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
83}
84
85static const struct pci_device_id netcell_pci_tbl[] = {
86 { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), },
87
88 { } /* terminate list */
89};
90
91static struct pci_driver netcell_pci_driver = {
92 .name = DRV_NAME,
93 .id_table = netcell_pci_tbl,
94 .probe = netcell_init_one,
95 .remove = ata_pci_remove_one,
96#ifdef CONFIG_PM
97 .suspend = ata_pci_device_suspend,
98 .resume = ata_pci_device_resume,
99#endif
100};
101
102static int __init netcell_init(void)
103{
104 return pci_register_driver(&netcell_pci_driver);
105}
106
107static void __exit netcell_exit(void)
108{
109 pci_unregister_driver(&netcell_pci_driver);
110}
111
112module_init(netcell_init);
113module_exit(netcell_exit);
114
115MODULE_AUTHOR("Alan Cox");
116MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID");
117MODULE_LICENSE("GPL");
118MODULE_DEVICE_TABLE(pci, netcell_pci_tbl);
119MODULE_VERSION(DRV_VERSION);
120