Loading...
Note: File does not exist in v6.8.
1/*
2 * Copyright IBM Corp. 1999,2010
3 *
4 * Author(s): Hartmut Penner <hp@de.ibm.com>
5 * Martin Schwidefsky <schwidefsky@de.ibm.com>
6 * Rob van der Heij <rvdhei@iae.nl>
7 * Heiko Carstens <heiko.carstens@de.ibm.com>
8 *
9 * There are 5 different IPL methods
10 * 1) load the image directly into ram at address 0 and do an PSW restart
11 * 2) linload will load the image from address 0x10000 to memory 0x10000
12 * and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
13 * 3) generate the tape ipl header, store the generated image on a tape
14 * and ipl from it
15 * In case of SL tape you need to IPL 5 times to get past VOL1 etc
16 * 4) generate the vm reader ipl header, move the generated image to the
17 * VM reader (use option NOH!) and do a ipl from reader (VM only)
18 * 5) direct call of start by the SALIPL loader
19 * We use the cpuid to distinguish between VM and native ipl
20 * params for kernel are pushed to 0x10400 (see setup.h)
21 *
22 */
23
24#include <linux/init.h>
25#include <linux/linkage.h>
26#include <asm/asm-offsets.h>
27#include <asm/thread_info.h>
28#include <asm/page.h>
29
30#ifdef CONFIG_64BIT
31#define ARCH_OFFSET 4
32#else
33#define ARCH_OFFSET 0
34#endif
35
36__HEAD
37#ifndef CONFIG_IPL
38 .org 0
39 .long 0x00080000,0x80000000+startup # Just a restart PSW
40#else
41#ifdef CONFIG_IPL_TAPE
42#define IPL_BS 1024
43 .org 0
44 .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
45 .long 0x27000000,0x60000001 # by ipl to addresses 0-23.
46 .long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs).
47 .long 0x00000000,0x00000000 # external old psw
48 .long 0x00000000,0x00000000 # svc old psw
49 .long 0x00000000,0x00000000 # program check old psw
50 .long 0x00000000,0x00000000 # machine check old psw
51 .long 0x00000000,0x00000000 # io old psw
52 .long 0x00000000,0x00000000
53 .long 0x00000000,0x00000000
54 .long 0x00000000,0x00000000
55 .long 0x000a0000,0x00000058 # external new psw
56 .long 0x000a0000,0x00000060 # svc new psw
57 .long 0x000a0000,0x00000068 # program check new psw
58 .long 0x000a0000,0x00000070 # machine check new psw
59 .long 0x00080000,0x80000000+.Lioint # io new psw
60
61 .org 0x100
62#
63# subroutine for loading from tape
64# Parameters:
65# R1 = device number
66# R2 = load address
67.Lloader:
68 st %r14,.Lldret
69 la %r3,.Lorbread # r3 = address of orb
70 la %r5,.Lirb # r5 = address of irb
71 st %r2,.Lccwread+4 # initialize CCW data addresses
72 lctl %c6,%c6,.Lcr6
73 slr %r2,%r2
74.Lldlp:
75 la %r6,3 # 3 retries
76.Lssch:
77 ssch 0(%r3) # load chunk of IPL_BS bytes
78 bnz .Llderr
79.Lw4end:
80 bas %r14,.Lwait4io
81 tm 8(%r5),0x82 # do we have a problem ?
82 bnz .Lrecov
83 slr %r7,%r7
84 icm %r7,3,10(%r5) # get residual count
85 lcr %r7,%r7
86 la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read
87 ar %r2,%r7 # add to total size
88 tm 8(%r5),0x01 # found a tape mark ?
89 bnz .Ldone
90 l %r0,.Lccwread+4 # update CCW data addresses
91 ar %r0,%r7
92 st %r0,.Lccwread+4
93 b .Lldlp
94.Ldone:
95 l %r14,.Lldret
96 br %r14 # r2 contains the total size
97.Lrecov:
98 bas %r14,.Lsense # do the sensing
99 bct %r6,.Lssch # dec. retry count & branch
100 b .Llderr
101#
102# Sense subroutine
103#
104.Lsense:
105 st %r14,.Lsnsret
106 la %r7,.Lorbsense
107 ssch 0(%r7) # start sense command
108 bnz .Llderr
109 bas %r14,.Lwait4io
110 l %r14,.Lsnsret
111 tm 8(%r5),0x82 # do we have a problem ?
112 bnz .Llderr
113 br %r14
114#
115# Wait for interrupt subroutine
116#
117.Lwait4io:
118 lpsw .Lwaitpsw
119.Lioint:
120 c %r1,0xb8 # compare subchannel number
121 bne .Lwait4io
122 tsch 0(%r5)
123 slr %r0,%r0
124 tm 8(%r5),0x82 # do we have a problem ?
125 bnz .Lwtexit
126 tm 8(%r5),0x04 # got device end ?
127 bz .Lwait4io
128.Lwtexit:
129 br %r14
130.Llderr:
131 lpsw .Lcrash
132
133 .align 8
134.Lorbread:
135 .long 0x00000000,0x0080ff00,.Lccwread
136 .align 8
137.Lorbsense:
138 .long 0x00000000,0x0080ff00,.Lccwsense
139 .align 8
140.Lccwread:
141 .long 0x02200000+IPL_BS,0x00000000
142.Lccwsense:
143 .long 0x04200001,0x00000000
144.Lwaitpsw:
145 .long 0x020a0000,0x80000000+.Lioint
146
147.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
148.Lcr6: .long 0xff000000
149 .align 8
150.Lcrash:.long 0x000a0000,0x00000000
151.Lldret:.long 0
152.Lsnsret: .long 0
153#endif /* CONFIG_IPL_TAPE */
154
155#ifdef CONFIG_IPL_VM
156#define IPL_BS 0x730
157 .org 0
158 .long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
159 .long 0x02000018,0x60000050 # by ipl to addresses 0-23.
160 .long 0x02000068,0x60000050 # (a PSW and two CCWs).
161 .fill 80-24,1,0x40 # bytes 24-79 are discarded !!
162 .long 0x020000f0,0x60000050 # The next 160 byte are loaded
163 .long 0x02000140,0x60000050 # to addresses 0x18-0xb7
164 .long 0x02000190,0x60000050 # They form the continuation
165 .long 0x020001e0,0x60000050 # of the CCW program started
166 .long 0x02000230,0x60000050 # by ipl and load the range
167 .long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
168 .long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
169 .long 0x02000320,0x60000050 # in memory. At the end of
170 .long 0x02000370,0x60000050 # the channel program the PSW
171 .long 0x020003c0,0x60000050 # at location 0 is loaded.
172 .long 0x02000410,0x60000050 # Initial processing starts
173 .long 0x02000460,0x60000050 # at 0xf0 = iplstart.
174 .long 0x020004b0,0x60000050
175 .long 0x02000500,0x60000050
176 .long 0x02000550,0x60000050
177 .long 0x020005a0,0x60000050
178 .long 0x020005f0,0x60000050
179 .long 0x02000640,0x60000050
180 .long 0x02000690,0x60000050
181 .long 0x020006e0,0x20000050
182
183 .org 0xf0
184#
185# subroutine for loading cards from the reader
186#
187.Lloader:
188 la %r3,.Lorb # r2 = address of orb into r2
189 la %r5,.Lirb # r4 = address of irb
190 la %r6,.Lccws
191 la %r7,20
192.Linit:
193 st %r2,4(%r6) # initialize CCW data addresses
194 la %r2,0x50(%r2)
195 la %r6,8(%r6)
196 bct 7,.Linit
197
198 lctl %c6,%c6,.Lcr6 # set IO subclass mask
199 slr %r2,%r2
200.Lldlp:
201 ssch 0(%r3) # load chunk of 1600 bytes
202 bnz .Llderr
203.Lwait4irq:
204 mvc 0x78(8),.Lnewpsw # set up IO interrupt psw
205 lpsw .Lwaitpsw
206.Lioint:
207 c %r1,0xb8 # compare subchannel number
208 bne .Lwait4irq
209 tsch 0(%r5)
210
211 slr %r0,%r0
212 ic %r0,8(%r5) # get device status
213 chi %r0,8 # channel end ?
214 be .Lcont
215 chi %r0,12 # channel end + device end ?
216 be .Lcont
217
218 l %r0,4(%r5)
219 s %r0,8(%r3) # r0/8 = number of ccws executed
220 mhi %r0,10 # *10 = number of bytes in ccws
221 lh %r3,10(%r5) # get residual count
222 sr %r0,%r3 # #ccws*80-residual=#bytes read
223 ar %r2,%r0
224
225 br %r14 # r2 contains the total size
226
227.Lcont:
228 ahi %r2,0x640 # add 0x640 to total size
229 la %r6,.Lccws
230 la %r7,20
231.Lincr:
232 l %r0,4(%r6) # update CCW data addresses
233 ahi %r0,0x640
234 st %r0,4(%r6)
235 ahi %r6,8
236 bct 7,.Lincr
237
238 b .Lldlp
239.Llderr:
240 lpsw .Lcrash
241
242 .align 8
243.Lorb: .long 0x00000000,0x0080ff00,.Lccws
244.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
245.Lcr6: .long 0xff000000
246.Lloadp:.long 0,0
247 .align 8
248.Lcrash:.long 0x000a0000,0x00000000
249.Lnewpsw:
250 .long 0x00080000,0x80000000+.Lioint
251.Lwaitpsw:
252 .long 0x020a0000,0x80000000+.Lioint
253
254 .align 8
255.Lccws: .rept 19
256 .long 0x02600050,0x00000000
257 .endr
258 .long 0x02200050,0x00000000
259#endif /* CONFIG_IPL_VM */
260
261iplstart:
262 lh %r1,0xb8 # test if subchannel number
263 bct %r1,.Lnoload # is valid
264 l %r1,0xb8 # load ipl subchannel number
265 la %r2,IPL_BS # load start address
266 bas %r14,.Lloader # load rest of ipl image
267 l %r12,.Lparm # pointer to parameter area
268 st %r1,IPL_DEVICE+ARCH_OFFSET-PARMAREA(%r12) # save ipl device number
269
270#
271# load parameter file from ipl device
272#
273.Lagain1:
274 l %r2,.Linitrd # ramdisk loc. is temp
275 bas %r14,.Lloader # load parameter file
276 ltr %r2,%r2 # got anything ?
277 bz .Lnopf
278 chi %r2,895
279 bnh .Lnotrunc
280 la %r2,895
281.Lnotrunc:
282 l %r4,.Linitrd
283 clc 0(3,%r4),.L_hdr # if it is HDRx
284 bz .Lagain1 # skip dataset header
285 clc 0(3,%r4),.L_eof # if it is EOFx
286 bz .Lagain1 # skip dateset trailer
287 la %r5,0(%r4,%r2)
288 lr %r3,%r2
289 la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
290 mvc 0(256,%r3),0(%r4)
291 mvc 256(256,%r3),256(%r4)
292 mvc 512(256,%r3),512(%r4)
293 mvc 768(122,%r3),768(%r4)
294 slr %r0,%r0
295 b .Lcntlp
296.Ldelspc:
297 ic %r0,0(%r2,%r3)
298 chi %r0,0x20 # is it a space ?
299 be .Lcntlp
300 ahi %r2,1
301 b .Leolp
302.Lcntlp:
303 brct %r2,.Ldelspc
304.Leolp:
305 slr %r0,%r0
306 stc %r0,0(%r2,%r3) # terminate buffer
307.Lnopf:
308
309#
310# load ramdisk from ipl device
311#
312.Lagain2:
313 l %r2,.Linitrd # addr of ramdisk
314 st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12)
315 bas %r14,.Lloader # load ramdisk
316 st %r2,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r12) # store size of rd
317 ltr %r2,%r2
318 bnz .Lrdcont
319 st %r2,INITRD_START+ARCH_OFFSET-PARMAREA(%r12) # no ramdisk found
320.Lrdcont:
321 l %r2,.Linitrd
322
323 clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
324 bz .Lagain2
325 clc 0(3,%r2),.L_eof
326 bz .Lagain2
327
328#ifdef CONFIG_IPL_VM
329#
330# reset files in VM reader
331#
332 stidp __LC_SAVE_AREA # store cpuid
333 tm __LC_SAVE_AREA,0xff # running VM ?
334 bno .Lnoreset
335 la %r2,.Lreset
336 lhi %r3,26
337 diag %r2,%r3,8
338 la %r5,.Lirb
339 stsch 0(%r5) # check if irq is pending
340 tm 30(%r5),0x0f # by verifying if any of the
341 bnz .Lwaitforirq # activity or status control
342 tm 31(%r5),0xff # bits is set in the schib
343 bz .Lnoreset
344.Lwaitforirq:
345 mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw
346.Lwaitrdrirq:
347 lpsw .Lrdrwaitpsw
348.Lrdrint:
349 c %r1,0xb8 # compare subchannel number
350 bne .Lwaitrdrirq
351 la %r5,.Lirb
352 tsch 0(%r5)
353.Lnoreset:
354 b .Lnoload
355
356 .align 8
357.Lrdrnewpsw:
358 .long 0x00080000,0x80000000+.Lrdrint
359.Lrdrwaitpsw:
360 .long 0x020a0000,0x80000000+.Lrdrint
361#endif
362
363#
364# everything loaded, go for it
365#
366.Lnoload:
367 l %r1,.Lstartup
368 br %r1
369
370.Linitrd:.long _end # default address of initrd
371.Lparm: .long PARMAREA
372.Lstartup: .long startup
373.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
374 .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
375 .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
376.L_eof: .long 0xc5d6c600 /* C'EOF' */
377.L_hdr: .long 0xc8c4d900 /* C'HDR' */
378
379#endif /* CONFIG_IPL */
380
381#
382# SALIPL loader support. Based on a patch by Rob van der Heij.
383# This entry point is called directly from the SALIPL loader and
384# doesn't need a builtin ipl record.
385#
386 .org 0x800
387ENTRY(start)
388 stm %r0,%r15,0x07b0 # store registers
389 basr %r12,%r0
390.base:
391 l %r11,.parm
392 l %r8,.cmd # pointer to command buffer
393
394 ltr %r9,%r9 # do we have SALIPL parameters?
395 bp .sk8x8
396
397 mvc 0(64,%r8),0x00b0 # copy saved registers
398 xc 64(240-64,%r8),0(%r8) # remainder of buffer
399 tr 0(64,%r8),.lowcase
400 b .gotr
401.sk8x8:
402 mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
403.gotr:
404 slr %r0,%r0
405 st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
406 st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
407 j startup # continue with startup
408.cmd: .long COMMAND_LINE # address of command line buffer
409.parm: .long PARMAREA
410.lowcase:
411 .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
412 .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
413 .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
414 .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
415 .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
416 .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
417 .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
418 .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
419 .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
420 .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
421 .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
422 .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
423 .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
424 .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
425 .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
426 .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
427
428 .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
429 .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
430 .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
431 .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
432 .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
433 .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
434 .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
435 .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
436 .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
437 .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi
438 .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
439 .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr
440 .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx
441 .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz
442 .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
443 .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
444
445#
446# startup-code at 0x10000, running in absolute addressing mode
447# this is called either by the ipl loader or directly by PSW restart
448# or linload or SALIPL
449#
450 .org 0x10000
451ENTRY(startup)
452 basr %r13,0 # get base
453.LPG0:
454 xc 0x200(256),0x200 # partially clear lowcore
455 xc 0x300(256),0x300
456 stck __LC_LAST_UPDATE_CLOCK
457 spt 5f-.LPG0(%r13)
458 mvc __LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13)
459#ifndef CONFIG_MARCH_G5
460 # check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
461 xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
462 .insn s,0xb2b10000,__LC_STFL_FAC_LIST # store facility list
463 tm __LC_STFL_FAC_LIST,0x01 # stfle available ?
464 jz 0f
465 la %r0,0
466 .insn s,0xb2b00000,__LC_STFL_FAC_LIST # store facility list extended
4670: l %r0,__LC_STFL_FAC_LIST
468 n %r0,2f+8-.LPG0(%r13)
469 cl %r0,2f+8-.LPG0(%r13)
470 jne 1f
471 l %r0,__LC_STFL_FAC_LIST+4
472 n %r0,2f+12-.LPG0(%r13)
473 cl %r0,2f+12-.LPG0(%r13)
474 je 3f
4751: l %r15,.Lstack-.LPG0(%r13)
476 ahi %r15,-96
477 la %r2,.Lals_string-.LPG0(%r13)
478 l %r3,.Lsclp_print-.LPG0(%r13)
479 basr %r14,%r3
480 lpsw 2f-.LPG0(%r13) # machine type not good enough, crash
481.Lals_string:
482 .asciz "The Linux kernel requires more recent processor hardware"
483.Lsclp_print:
484 .long _sclp_print_early
485.Lstack:
486 .long 0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER))
487 .align 16
4882: .long 0x000a0000,0x8badcccc
489#if defined(CONFIG_64BIT)
490#if defined(CONFIG_MARCH_Z196)
491 .long 0xc100efe3, 0xf46c0000
492#elif defined(CONFIG_MARCH_Z10)
493 .long 0xc100efe3, 0xf0680000
494#elif defined(CONFIG_MARCH_Z9_109)
495 .long 0xc100efc3, 0x00000000
496#elif defined(CONFIG_MARCH_Z990)
497 .long 0xc0002000, 0x00000000
498#elif defined(CONFIG_MARCH_Z900)
499 .long 0xc0000000, 0x00000000
500#endif
501#else
502#if defined(CONFIG_MARCH_Z196)
503 .long 0x8100c880, 0x00000000
504#elif defined(CONFIG_MARCH_Z10)
505 .long 0x8100c880, 0x00000000
506#elif defined(CONFIG_MARCH_Z9_109)
507 .long 0x8100c880, 0x00000000
508#elif defined(CONFIG_MARCH_Z990)
509 .long 0x80002000, 0x00000000
510#elif defined(CONFIG_MARCH_Z900)
511 .long 0x80000000, 0x00000000
512#endif
513#endif
5143:
515#endif
516
517#ifdef CONFIG_64BIT
518 mvi __LC_AR_MODE_ID,1 # set esame flag
519 slr %r0,%r0 # set cpuid to zero
520 lhi %r1,2 # mode 2 = esame (dump)
521 sigp %r1,%r0,0x12 # switch to esame mode
522 sam64 # switch to 64 bit mode
523 larl %r13,4f
524 lmh %r0,%r15,0(%r13) # clear high-order half
525 jg startup_continue
5264: .fill 16,4,0x0
527#else
528 mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
529 l %r13,4f-.LPG0(%r13)
530 b 0(%r13)
531 .align 8
5324: .long startup_continue
533#endif
534 .align 8
5355: .long 0x7fffffff,0xffffffff
536
537#
538# params at 10400 (setup.h)
539#
540 .org PARMAREA
541 .long 0,0 # IPL_DEVICE
542 .long 0,0 # INITRD_START
543 .long 0,0 # INITRD_SIZE
544
545 .org COMMAND_LINE
546 .byte "root=/dev/ram0 ro"
547 .byte 0
548
549 .org 0x11000