Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 | /* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2013 Imagination Technologies * Author: Paul Burton <paul.burton@mips.com> */ #ifndef __MIPS_ASM_MIPS_CPS_H__ # error Please include asm/mips-cps.h rather than asm/mips-cm.h #endif #ifndef __MIPS_ASM_MIPS_CM_H__ #define __MIPS_ASM_MIPS_CM_H__ #include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/errno.h> /* The base address of the CM GCR block */ extern void __iomem *mips_gcr_base; /* The base address of the CM L2-only sync region */ extern void __iomem *mips_cm_l2sync_base; /** * __mips_cm_phys_base - retrieve the physical base address of the CM * * This function returns the physical base address of the Coherence Manager * global control block, or 0 if no Coherence Manager is present. It provides * a default implementation which reads the CMGCRBase register where available, * and may be overridden by platforms which determine this address in a * different way by defining a function with the same prototype except for the * name mips_cm_phys_base (without underscores). */ extern phys_addr_t __mips_cm_phys_base(void); /* * mips_cm_is64 - determine CM register width * * The CM register width is determined by the version of the CM, with CM3 * introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs. * However we may run a kernel built for MIPS32 on a system with 64 bit GCRs, * or vice-versa. This variable indicates the width of the memory accesses * that the kernel will perform to GCRs, which may differ from the actual * width of the GCRs. * * It's set to 0 for 32-bit accesses and 1 for 64-bit accesses. */ extern int mips_cm_is64; /** * mips_cm_error_report - Report CM cache errors */ #ifdef CONFIG_MIPS_CM extern void mips_cm_error_report(void); #else static inline void mips_cm_error_report(void) {} #endif /** * mips_cm_probe - probe for a Coherence Manager * * Attempt to detect the presence of a Coherence Manager. Returns 0 if a CM * is successfully detected, else -errno. */ #ifdef CONFIG_MIPS_CM extern int mips_cm_probe(void); #else static inline int mips_cm_probe(void) { return -ENODEV; } #endif /** * mips_cm_present - determine whether a Coherence Manager is present * * Returns true if a CM is present in the system, else false. */ static inline bool mips_cm_present(void) { #ifdef CONFIG_MIPS_CM return mips_gcr_base != NULL; #else return false; #endif } /** * mips_cm_has_l2sync - determine whether an L2-only sync region is present * * Returns true if the system implements an L2-only sync region, else false. */ static inline bool mips_cm_has_l2sync(void) { #ifdef CONFIG_MIPS_CM return mips_cm_l2sync_base != NULL; #else return false; #endif } /* Offsets to register blocks from the CM base address */ #define MIPS_CM_GCB_OFS 0x0000 /* Global Control Block */ #define MIPS_CM_CLCB_OFS 0x2000 /* Core Local Control Block */ #define MIPS_CM_COCB_OFS 0x4000 /* Core Other Control Block */ #define MIPS_CM_GDB_OFS 0x6000 /* Global Debug Block */ /* Total size of the CM memory mapped registers */ #define MIPS_CM_GCR_SIZE 0x8000 /* Size of the L2-only sync region */ #define MIPS_CM_L2SYNC_SIZE 0x1000 #define GCR_ACCESSOR_RO(sz, off, name) \ CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_GCB_OFS + off, name) \ CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name) #define GCR_ACCESSOR_RW(sz, off, name) \ CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_GCB_OFS + off, name) \ CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, redir_##name) #define GCR_CX_ACCESSOR_RO(sz, off, name) \ CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name) \ CPS_ACCESSOR_RO(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name) #define GCR_CX_ACCESSOR_RW(sz, off, name) \ CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name) \ CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name) /* GCR_CONFIG - Information about the system */ GCR_ACCESSOR_RO(64, 0x000, config) #define CM_GCR_CONFIG_CLUSTER_COH_CAPABLE BIT_ULL(43) #define CM_GCR_CONFIG_CLUSTER_ID GENMASK_ULL(39, 32) #define CM_GCR_CONFIG_NUM_CLUSTERS GENMASK(29, 23) #define CM_GCR_CONFIG_NUMIOCU GENMASK(15, 8) #define CM_GCR_CONFIG_PCORES GENMASK(7, 0) /* GCR_BASE - Base address of the Global Configuration Registers (GCRs) */ GCR_ACCESSOR_RW(64, 0x008, base) #define CM_GCR_BASE_GCRBASE GENMASK_ULL(47, 15) #define CM_GCR_BASE_CMDEFTGT GENMASK(1, 0) #define CM_GCR_BASE_CMDEFTGT_MEM 0 #define CM_GCR_BASE_CMDEFTGT_RESERVED 1 #define CM_GCR_BASE_CMDEFTGT_IOCU0 2 #define CM_GCR_BASE_CMDEFTGT_IOCU1 3 /* GCR_ACCESS - Controls core/IOCU access to GCRs */ GCR_ACCESSOR_RW(32, 0x020, access) #define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0) /* GCR_REV - Indicates the Coherence Manager revision */ GCR_ACCESSOR_RO(32, 0x030, rev) #define CM_GCR_REV_MAJOR GENMASK(15, 8) #define CM_GCR_REV_MINOR GENMASK(7, 0) #define CM_ENCODE_REV(major, minor) \ (FIELD_PREP(CM_GCR_REV_MAJOR, major) | \ FIELD_PREP(CM_GCR_REV_MINOR, minor)) #define CM_REV_CM2 CM_ENCODE_REV(6, 0) #define CM_REV_CM2_5 CM_ENCODE_REV(7, 0) #define CM_REV_CM3 CM_ENCODE_REV(8, 0) #define CM_REV_CM3_5 CM_ENCODE_REV(9, 0) /* GCR_ERR_CONTROL - Control error checking logic */ GCR_ACCESSOR_RW(32, 0x038, err_control) #define CM_GCR_ERR_CONTROL_L2_ECC_EN BIT(1) #define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT BIT(0) /* GCR_ERR_MASK - Control which errors are reported as interrupts */ GCR_ACCESSOR_RW(64, 0x040, error_mask) /* GCR_ERR_CAUSE - Indicates the type of error that occurred */ GCR_ACCESSOR_RW(64, 0x048, error_cause) #define CM_GCR_ERROR_CAUSE_ERRTYPE GENMASK(31, 27) #define CM3_GCR_ERROR_CAUSE_ERRTYPE GENMASK_ULL(63, 58) #define CM_GCR_ERROR_CAUSE_ERRINFO GENMASK(26, 0) /* GCR_ERR_ADDR - Indicates the address associated with an error */ GCR_ACCESSOR_RW(64, 0x050, error_addr) /* GCR_ERR_MULT - Indicates when multiple errors have occurred */ GCR_ACCESSOR_RW(64, 0x058, error_mult) #define CM_GCR_ERROR_MULT_ERR2ND GENMASK(4, 0) /* GCR_L2_ONLY_SYNC_BASE - Base address of the L2 cache-only sync region */ GCR_ACCESSOR_RW(64, 0x070, l2_only_sync_base) #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE GENMASK(31, 12) #define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN BIT(0) /* GCR_GIC_BASE - Base address of the Global Interrupt Controller (GIC) */ GCR_ACCESSOR_RW(64, 0x080, gic_base) #define CM_GCR_GIC_BASE_GICBASE GENMASK(31, 17) #define CM_GCR_GIC_BASE_GICEN BIT(0) /* GCR_CPC_BASE - Base address of the Cluster Power Controller (CPC) */ GCR_ACCESSOR_RW(64, 0x088, cpc_base) #define CM_GCR_CPC_BASE_CPCBASE GENMASK(31, 15) #define CM_GCR_CPC_BASE_CPCEN BIT(0) /* GCR_REGn_BASE - Base addresses of CM address regions */ GCR_ACCESSOR_RW(64, 0x090, reg0_base) GCR_ACCESSOR_RW(64, 0x0a0, reg1_base) GCR_ACCESSOR_RW(64, 0x0b0, reg2_base) GCR_ACCESSOR_RW(64, 0x0c0, reg3_base) #define CM_GCR_REGn_BASE_BASEADDR GENMASK(31, 16) /* GCR_REGn_MASK - Size & destination of CM address regions */ GCR_ACCESSOR_RW(64, 0x098, reg0_mask) GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask) GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask) GCR_ACCESSOR_RW(64, 0x0c8, reg3_mask) #define CM_GCR_REGn_MASK_ADDRMASK GENMASK(31, 16) #define CM_GCR_REGn_MASK_CCAOVR GENMASK(7, 5) #define CM_GCR_REGn_MASK_CCAOVREN BIT(4) #define CM_GCR_REGn_MASK_DROPL2 BIT(2) #define CM_GCR_REGn_MASK_CMTGT GENMASK(1, 0) #define CM_GCR_REGn_MASK_CMTGT_DISABLED 0x0 #define CM_GCR_REGn_MASK_CMTGT_MEM 0x1 #define CM_GCR_REGn_MASK_CMTGT_IOCU0 0x2 #define CM_GCR_REGn_MASK_CMTGT_IOCU1 0x3 /* GCR_GIC_STATUS - Indicates presence of a Global Interrupt Controller (GIC) */ GCR_ACCESSOR_RO(32, 0x0d0, gic_status) #define CM_GCR_GIC_STATUS_EX BIT(0) /* GCR_CPC_STATUS - Indicates presence of a Cluster Power Controller (CPC) */ GCR_ACCESSOR_RO(32, 0x0f0, cpc_status) #define CM_GCR_CPC_STATUS_EX BIT(0) /* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */ GCR_ACCESSOR_RW(32, 0x130, l2_config) #define CM_GCR_L2_CONFIG_BYPASS BIT(20) #define CM_GCR_L2_CONFIG_SET_SIZE GENMASK(15, 12) #define CM_GCR_L2_CONFIG_LINE_SIZE GENMASK(11, 8) #define CM_GCR_L2_CONFIG_ASSOC GENMASK(7, 0) /* GCR_SYS_CONFIG2 - Further information about the system */ GCR_ACCESSOR_RO(32, 0x150, sys_config2) #define CM_GCR_SYS_CONFIG2_MAXVPW GENMASK(3, 0) /* GCR_L2_PFT_CONTROL - Controls hardware L2 prefetching */ GCR_ACCESSOR_RW(32, 0x300, l2_pft_control) #define CM_GCR_L2_PFT_CONTROL_PAGEMASK GENMASK(31, 12) #define CM_GCR_L2_PFT_CONTROL_PFTEN BIT(8) #define CM_GCR_L2_PFT_CONTROL_NPFT GENMASK(7, 0) /* GCR_L2_PFT_CONTROL_B - Controls hardware L2 prefetching */ GCR_ACCESSOR_RW(32, 0x308, l2_pft_control_b) #define CM_GCR_L2_PFT_CONTROL_B_CEN BIT(8) #define CM_GCR_L2_PFT_CONTROL_B_PORTID GENMASK(7, 0) /* GCR_L2SM_COP - L2 cache op state machine control */ GCR_ACCESSOR_RW(32, 0x620, l2sm_cop) #define CM_GCR_L2SM_COP_PRESENT BIT(31) #define CM_GCR_L2SM_COP_RESULT GENMASK(8, 6) #define CM_GCR_L2SM_COP_RESULT_DONTCARE 0 #define CM_GCR_L2SM_COP_RESULT_DONE_OK 1 #define CM_GCR_L2SM_COP_RESULT_DONE_ERROR 2 #define CM_GCR_L2SM_COP_RESULT_ABORT_OK 3 #define CM_GCR_L2SM_COP_RESULT_ABORT_ERROR 4 #define CM_GCR_L2SM_COP_RUNNING BIT(5) #define CM_GCR_L2SM_COP_TYPE GENMASK(4, 2) #define CM_GCR_L2SM_COP_TYPE_IDX_WBINV 0 #define CM_GCR_L2SM_COP_TYPE_IDX_STORETAG 1 #define CM_GCR_L2SM_COP_TYPE_IDX_STORETAGDATA 2 #define CM_GCR_L2SM_COP_TYPE_HIT_INV 4 #define CM_GCR_L2SM_COP_TYPE_HIT_WBINV 5 #define CM_GCR_L2SM_COP_TYPE_HIT_WB 6 #define CM_GCR_L2SM_COP_TYPE_FETCHLOCK 7 #define CM_GCR_L2SM_COP_CMD GENMASK(1, 0) #define CM_GCR_L2SM_COP_CMD_START 1 /* only when idle */ #define CM_GCR_L2SM_COP_CMD_ABORT 3 /* only when running */ /* GCR_L2SM_TAG_ADDR_COP - L2 cache op state machine address control */ GCR_ACCESSOR_RW(64, 0x628, l2sm_tag_addr_cop) #define CM_GCR_L2SM_TAG_ADDR_COP_NUM_LINES GENMASK_ULL(63, 48) #define CM_GCR_L2SM_TAG_ADDR_COP_START_TAG GENMASK_ULL(47, 6) /* GCR_BEV_BASE - Controls the location of the BEV for powered up cores */ GCR_ACCESSOR_RW(64, 0x680, bev_base) /* GCR_Cx_RESET_RELEASE - Controls core reset for CM 1.x */ GCR_CX_ACCESSOR_RW(32, 0x000, reset_release) /* GCR_Cx_COHERENCE - Controls core coherence */ GCR_CX_ACCESSOR_RW(32, 0x008, coherence) #define CM_GCR_Cx_COHERENCE_COHDOMAINEN GENMASK(7, 0) #define CM3_GCR_Cx_COHERENCE_COHEN BIT(0) /* GCR_Cx_CONFIG - Information about a core's configuration */ GCR_CX_ACCESSOR_RO(32, 0x010, config) #define CM_GCR_Cx_CONFIG_IOCUTYPE GENMASK(11, 10) #define CM_GCR_Cx_CONFIG_PVPE GENMASK(9, 0) /* GCR_Cx_OTHER - Configure the core-other/redirect GCR block */ GCR_CX_ACCESSOR_RW(32, 0x018, other) #define CM_GCR_Cx_OTHER_CORENUM GENMASK(31, 16) /* CM < 3 */ #define CM_GCR_Cx_OTHER_CLUSTER_EN BIT(31) /* CM >= 3.5 */ #define CM_GCR_Cx_OTHER_GIC_EN BIT(30) /* CM >= 3.5 */ #define CM_GCR_Cx_OTHER_BLOCK GENMASK(25, 24) /* CM >= 3.5 */ #define CM_GCR_Cx_OTHER_BLOCK_LOCAL 0 #define CM_GCR_Cx_OTHER_BLOCK_GLOBAL 1 #define CM_GCR_Cx_OTHER_BLOCK_USER 2 #define CM_GCR_Cx_OTHER_BLOCK_GLOBAL_HIGH 3 #define CM_GCR_Cx_OTHER_CLUSTER GENMASK(21, 16) /* CM >= 3.5 */ #define CM3_GCR_Cx_OTHER_CORE GENMASK(13, 8) /* CM >= 3 */ #define CM_GCR_Cx_OTHER_CORE_CM 32 #define CM3_GCR_Cx_OTHER_VP GENMASK(2, 0) /* CM >= 3 */ /* GCR_Cx_RESET_BASE - Configure where powered up cores will fetch from */ GCR_CX_ACCESSOR_RW(32, 0x020, reset_base) #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE GENMASK(31, 12) /* GCR_Cx_ID - Identify the current core */ GCR_CX_ACCESSOR_RO(32, 0x028, id) #define CM_GCR_Cx_ID_CLUSTER GENMASK(15, 8) #define CM_GCR_Cx_ID_CORE GENMASK(7, 0) /* GCR_Cx_RESET_EXT_BASE - Configure behaviour when cores reset or power up */ GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base) #define CM_GCR_Cx_RESET_EXT_BASE_EVARESET BIT(31) #define CM_GCR_Cx_RESET_EXT_BASE_UEB BIT(30) #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK GENMASK(27, 20) #define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA GENMASK(7, 1) #define CM_GCR_Cx_RESET_EXT_BASE_PRESENT BIT(0) /** * mips_cm_l2sync - perform an L2-only sync operation * * If an L2-only sync region is present in the system then this function * performs and L2-only sync and returns zero. Otherwise it returns -ENODEV. */ static inline int mips_cm_l2sync(void) { if (!mips_cm_has_l2sync()) return -ENODEV; writel(0, mips_cm_l2sync_base); return 0; } /** * mips_cm_revision() - return CM revision * * Return: The revision of the CM, from GCR_REV, or 0 if no CM is present. The * return value should be checked against the CM_REV_* macros. */ static inline int mips_cm_revision(void) { if (!mips_cm_present()) return 0; return read_gcr_rev(); } /** * mips_cm_max_vp_width() - return the width in bits of VP indices * * Return: the width, in bits, of VP indices in fields that combine core & VP * indices. */ static inline unsigned int mips_cm_max_vp_width(void) { extern int smp_num_siblings; if (mips_cm_revision() >= CM_REV_CM3) return FIELD_GET(CM_GCR_SYS_CONFIG2_MAXVPW, read_gcr_sys_config2()); if (mips_cm_present()) { /* * We presume that all cores in the system will have the same * number of VP(E)s, and if that ever changes then this will * need revisiting. */ return FIELD_GET(CM_GCR_Cx_CONFIG_PVPE, read_gcr_cl_config()) + 1; } if (IS_ENABLED(CONFIG_SMP)) return smp_num_siblings; return 1; } /** * mips_cm_vp_id() - calculate the hardware VP ID for a CPU * @cpu: the CPU whose VP ID to calculate * * Hardware such as the GIC uses identifiers for VPs which may not match the * CPU numbers used by Linux. This function calculates the hardware VP * identifier corresponding to a given CPU. * * Return: the VP ID for the CPU. */ static inline unsigned int mips_cm_vp_id(unsigned int cpu) { unsigned int core = cpu_core(&cpu_data[cpu]); unsigned int vp = cpu_vpe_id(&cpu_data[cpu]); return (core * mips_cm_max_vp_width()) + vp; } #ifdef CONFIG_MIPS_CM /** * mips_cm_lock_other - lock access to redirect/other region * @cluster: the other cluster to be accessed * @core: the other core to be accessed * @vp: the VP within the other core to be accessed * @block: the register block to be accessed * * Configure the redirect/other region for the local core/VP (depending upon * the CM revision) to target the specified @cluster, @core, @vp & register * @block. Must be called before using the redirect/other region, and followed * by a call to mips_cm_unlock_other() when access to the redirect/other region * is complete. * * This function acquires a spinlock such that code between it & * mips_cm_unlock_other() calls cannot be pre-empted by anything which may * reconfigure the redirect/other region, and cannot be interfered with by * another VP in the core. As such calls to this function should not be nested. */ extern void mips_cm_lock_other(unsigned int cluster, unsigned int core, unsigned int vp, unsigned int block); /** * mips_cm_unlock_other - unlock access to redirect/other region * * Must be called after mips_cm_lock_other() once all required access to the * redirect/other region has been completed. */ extern void mips_cm_unlock_other(void); #else /* !CONFIG_MIPS_CM */ static inline void mips_cm_lock_other(unsigned int cluster, unsigned int core, unsigned int vp, unsigned int block) { } static inline void mips_cm_unlock_other(void) { } #endif /* !CONFIG_MIPS_CM */ /** * mips_cm_lock_other_cpu - lock access to redirect/other region * @cpu: the other CPU whose register we want to access * * Configure the redirect/other region for the local core/VP (depending upon * the CM revision) to target the specified @cpu & register @block. This is * equivalent to calling mips_cm_lock_other() but accepts a Linux CPU number * for convenience. */ static inline void mips_cm_lock_other_cpu(unsigned int cpu, unsigned int block) { struct cpuinfo_mips *d = &cpu_data[cpu]; mips_cm_lock_other(cpu_cluster(d), cpu_core(d), cpu_vpe_id(d), block); } #endif /* __MIPS_ASM_MIPS_CM_H__ */ |