1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# Touchscreen driver configuration
   4#
   5menuconfig INPUT_TOUCHSCREEN
   6	bool "Touchscreens"
   7	help
   8	  Say Y here, and a list of supported touchscreens will be displayed.
   9	  This option doesn't affect the kernel.
  10
  11	  If unsure, say Y.
  12
  13if INPUT_TOUCHSCREEN
  14
  15config TOUCHSCREEN_88PM860X
  16	tristate "Marvell 88PM860x touchscreen"
  17	depends on MFD_88PM860X
  18	help
  19	  Say Y here if you have a 88PM860x PMIC and want to enable
  20	  support for the built-in touchscreen.
  21
  22	  If unsure, say N.
  23
  24	  To compile this driver as a module, choose M here: the
  25	  module will be called 88pm860x-ts.
  26
  27config TOUCHSCREEN_ADS7846
  28	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  29	depends on SPI_MASTER
  30	depends on HWMON = n || HWMON
  31	help
  32	  Say Y here if you have a touchscreen interface using the
  33	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  34	  and your board-specific setup code includes that in its
  35	  table of SPI devices.
  36
  37	  If HWMON is selected, and the driver is told the reference voltage
  38	  on your board, you will also get hwmon interfaces for the voltage
  39	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  40
  41	  If unsure, say N (but it's safe to say "Y").
  42
  43	  To compile this driver as a module, choose M here: the
  44	  module will be called ads7846.
  45
  46config TOUCHSCREEN_AD7877
  47	tristate "AD7877 based touchscreens"
  48	depends on SPI_MASTER
  49	help
  50	  Say Y here if you have a touchscreen interface using the
  51	  AD7877 controller, and your board-specific initialization
  52	  code includes that in its table of SPI devices.
  53
  54	  If unsure, say N (but it's safe to say "Y").
  55
  56	  To compile this driver as a module, choose M here: the
  57	  module will be called ad7877.
  58
  59config TOUCHSCREEN_AD7879
  60	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  61	help
  62	  Say Y here if you want to support a touchscreen interface using
  63	  the AD7879-1/AD7889-1 controller.
  64
  65	  You should select a bus connection too.
  66
  67	  To compile this driver as a module, choose M here: the
  68	  module will be called ad7879.
  69
  70config TOUCHSCREEN_AD7879_I2C
  71	tristate "support I2C bus connection"
  72	depends on TOUCHSCREEN_AD7879 && I2C
  73	select REGMAP_I2C
  74	help
  75	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  76
  77	  To compile this driver as a module, choose M here: the
  78	  module will be called ad7879-i2c.
  79
  80config TOUCHSCREEN_AD7879_SPI
  81	tristate "support SPI bus connection"
  82	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  83	select REGMAP_SPI
  84	help
  85	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  86
  87	  If unsure, say N (but it's safe to say "Y").
  88
  89	  To compile this driver as a module, choose M here: the
  90	  module will be called ad7879-spi.
  91
  92config TOUCHSCREEN_ADC
  93	tristate "Generic ADC based resistive touchscreen"
  94	depends on IIO
  95	select IIO_BUFFER
  96	select IIO_BUFFER_CB
  97	help
  98	  Say Y here if you want to use the generic ADC
  99	  resistive touchscreen driver.
 100
 101	  If unsure, say N (but it's safe to say "Y").
 102
 103	  To compile this driver as a module, choose M here: the
 104	  module will be called resistive-adc-touch.ko.
 105
 106config TOUCHSCREEN_AR1021_I2C
 107	tristate "Microchip AR1020/1021 i2c touchscreen"
 108	depends on I2C && OF
 109	help
 110	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
 111	  controller chip in your system.
 112
 113	  If unsure, say N.
 114
 115	  To compile this driver as a module, choose M here: the
 116	  module will be called ar1021_i2c.
 117
 118config TOUCHSCREEN_ATMEL_MXT
 119	tristate "Atmel mXT I2C Touchscreen"
 120	depends on I2C
 121	select FW_LOADER
 122	help
 123	  Say Y here if you have Atmel mXT series I2C touchscreen,
 124	  such as AT42QT602240/ATMXT224, connected to your system.
 125
 126	  If unsure, say N.
 127
 128	  To compile this driver as a module, choose M here: the
 129	  module will be called atmel_mxt_ts.
 130
 131config TOUCHSCREEN_ATMEL_MXT_T37
 132	bool "Support T37 Diagnostic Data"
 133	depends on TOUCHSCREEN_ATMEL_MXT
 134	depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
 135	select VIDEOBUF2_VMALLOC
 136	help
 137	  Say Y here if you want support to output data from the T37
 138	  Diagnostic Data object using a V4L device.
 139
 140config TOUCHSCREEN_AUO_PIXCIR
 141	tristate "AUO in-cell touchscreen using Pixcir ICs"
 142	depends on I2C
 143	depends on GPIOLIB || COMPILE_TEST
 144	help
 145	  Say Y here if you have a AUO display with in-cell touchscreen
 146	  using Pixcir ICs.
 147
 148	  If unsure, say N.
 149
 150	  To compile this driver as a module, choose M here: the
 151	  module will be called auo-pixcir-ts.
 152
 153config TOUCHSCREEN_BU21013
 154	tristate "BU21013 based touch panel controllers"
 155	depends on I2C
 156	help
 157	  Say Y here if you have a bu21013 touchscreen connected to
 158	  your system.
 159
 160	  If unsure, say N.
 161
 162	  To compile this driver as a module, choose M here: the
 163	  module will be called bu21013_ts.
 164
 165config TOUCHSCREEN_BU21029
 166	tristate "Rohm BU21029 based touch panel controllers"
 167	depends on I2C
 168	help
 169	  Say Y here if you have a Rohm BU21029 touchscreen controller
 170	  connected to your system.
 171
 172	  If unsure, say N.
 173
 174	  To compile this driver as a module, choose M here: the
 175	  module will be called bu21029_ts.
 176
 177config TOUCHSCREEN_CHIPONE_ICN8318
 178	tristate "chipone icn8318 touchscreen controller"
 179	depends on GPIOLIB || COMPILE_TEST
 180	depends on I2C
 181	depends on OF
 182	help
 183	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 184
 185	  If unsure, say N.
 186
 187	  To compile this driver as a module, choose M here: the
 188	  module will be called chipone_icn8318.
 189
 190config TOUCHSCREEN_CHIPONE_ICN8505
 191	tristate "chipone icn8505 touchscreen controller"
 192	depends on I2C && ACPI
 193	help
 194	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
 195
 196	  If unsure, say N.
 197
 198	  To compile this driver as a module, choose M here: the
 199	  module will be called chipone_icn8505.
 200
 201config TOUCHSCREEN_CY8CTMA140
 202	tristate "cy8ctma140 touchscreen"
 203	depends on I2C
 204	help
 205	  Say Y here if you have a Cypress CY8CTMA140 capacitive
 206	  touchscreen also just known as "TMA140"
 207
 208	  If unsure, say N.
 209
 210	  To compile this driver as a module, choose M here: the
 211	  module will be called cy8ctma140.
 212
 213config TOUCHSCREEN_CY8CTMG110
 214	tristate "cy8ctmg110 touchscreen"
 215	depends on I2C
 216	depends on GPIOLIB || COMPILE_TEST
 217	help
 218	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 219	  an AAVA device.
 220
 221	  If unsure, say N.
 222
 223	  To compile this driver as a module, choose M here: the
 224	  module will be called cy8ctmg110_ts.
 225
 226config TOUCHSCREEN_CYTTSP_CORE
 227	tristate "Cypress TTSP touchscreen"
 228	help
 229	  Say Y here if you have a touchscreen using controller from
 230	  the Cypress TrueTouch(tm) Standard Product family connected
 231	  to your system. You will also need to select appropriate
 232	  bus connection below.
 233
 234	  If unsure, say N.
 235
 236	  To compile this driver as a module, choose M here: the
 237	  module will be called cyttsp_core.
 238
 239config TOUCHSCREEN_CYTTSP_I2C
 240	tristate "support I2C bus connection"
 241	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 242	help
 243	  Say Y here if the touchscreen is connected via I2C bus.
 244
 245	  To compile this driver as a module, choose M here: the
 246	  module will be called cyttsp_i2c.
 247
 248config TOUCHSCREEN_CYTTSP_SPI
 249	tristate "support SPI bus connection"
 250	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 251	help
 252	  Say Y here if the touchscreen is connected via SPI bus.
 253
 254	  To compile this driver as a module, choose M here: the
 255	  module will be called cyttsp_spi.
 256
 257config TOUCHSCREEN_CYTTSP4_CORE
 258	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 259	help
 260	  Core driver for Cypress TrueTouch(tm) Standard Product
 261	  Generation4 touchscreen controllers.
 262
 263	  Say Y here if you have a Cypress Gen4 touchscreen.
 264
 265	  If unsure, say N.
 266
 267	  To compile this driver as a module, choose M here.
 268
 269config TOUCHSCREEN_CYTTSP4_I2C
 270	tristate "support I2C bus connection"
 271	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 272	help
 273	  Say Y here if the touchscreen is connected via I2C bus.
 274
 275	  To compile this driver as a module, choose M here: the
 276	  module will be called cyttsp4_i2c.
 277
 278config TOUCHSCREEN_CYTTSP4_SPI
 279	tristate "support SPI bus connection"
 280	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 281	help
 282	  Say Y here if the touchscreen is connected via SPI bus.
 283
 284	  To compile this driver as a module, choose M here: the
 285	  module will be called cyttsp4_spi.
 286
 287config TOUCHSCREEN_CYTTSP5
 288	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
 289	depends on I2C
 290	select REGMAP_I2C
 291	select CRC_ITU_T
 292	help
 293	  Driver for Parade TrueTouch Standard Product Generation 5
 294	  touchscreen controllers. I2C bus interface support only.
 295
 296	  Say Y here if you have a Cypress Gen5 touchscreen.
 297
 298	  If unsure, say N.
 299
 300	  To compile this driver as a module, choose M here: the
 301	  module will be called cyttsp5.
 302
 303config TOUCHSCREEN_DA9034
 304	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 305	depends on PMIC_DA903X
 306	default y
 307	help
 308	  Say Y here to enable the support for the touchscreen found
 309	  on Dialog Semiconductor DA9034 PMIC.
 310
 311	  If unsure, say N.
 312
 313	  To compile this driver as a module, choose M here: the
 314	  module will be called da9034-ts.
 315
 316config TOUCHSCREEN_DA9052
 317	tristate "Dialog DA9052/DA9053 TSI"
 318	depends on PMIC_DA9052
 319	help
 320	  Say Y here to support the touchscreen found on Dialog Semiconductor
 321	  DA9052-BC and DA9053-AA/Bx PMICs.
 322
 323	  If unsure, say N.
 324
 325	  To compile this driver as a module, choose M here: the
 326	  module will be called da9052_tsi.
 327
 328config TOUCHSCREEN_DYNAPRO
 329	tristate "Dynapro serial touchscreen"
 330	select SERIO
 331	help
 332	  Say Y here if you have a Dynapro serial touchscreen connected to
 333	  your system.
 334
 335	  If unsure, say N.
 336
 337	  To compile this driver as a module, choose M here: the
 338	  module will be called dynapro.
 339
 340config TOUCHSCREEN_HAMPSHIRE
 341	tristate "Hampshire serial touchscreen"
 342	select SERIO
 343	help
 344	  Say Y here if you have a Hampshire serial touchscreen connected to
 345	  your system.
 346
 347	  If unsure, say N.
 348
 349	  To compile this driver as a module, choose M here: the
 350	  module will be called hampshire.
 351
 352config TOUCHSCREEN_EETI
 353	tristate "EETI touchscreen panel support"
 354	depends on I2C
 355	help
 356	  Say Y here to enable support for I2C connected EETI touch panels.
 357
 358	  To compile this driver as a module, choose M here: the
 359	  module will be called eeti_ts.
 360
 361config TOUCHSCREEN_EGALAX
 362	tristate "EETI eGalax multi-touch panel support"
 363	depends on I2C && OF
 364	help
 365	  Say Y here to enable support for I2C connected EETI
 366	  eGalax multi-touch panels.
 367
 368	  To compile this driver as a module, choose M here: the
 369	  module will be called egalax_ts.
 370
 371config TOUCHSCREEN_EGALAX_SERIAL
 372	tristate "EETI eGalax serial touchscreen"
 373	select SERIO
 374	help
 375	  Say Y here to enable support for serial connected EETI
 376	  eGalax touch panels.
 377
 378	  To compile this driver as a module, choose M here: the
 379	  module will be called egalax_ts_serial.
 380
 381config TOUCHSCREEN_EXC3000
 382	tristate "EETI EXC3000 multi-touch panel support"
 383	depends on I2C
 384	help
 385	  Say Y here to enable support for I2C connected EETI
 386	  EXC3000 multi-touch panels.
 387
 388	  To compile this driver as a module, choose M here: the
 389	  module will be called exc3000.
 390
 391config TOUCHSCREEN_FUJITSU
 392	tristate "Fujitsu serial touchscreen"
 393	select SERIO
 394	help
 395	  Say Y here if you have the Fujitsu touchscreen (such as one
 396	  installed in Lifebook P series laptop) connected to your
 397	  system.
 398
 399	  If unsure, say N.
 400
 401	  To compile this driver as a module, choose M here: the
 402	  module will be called fujitsu-ts.
 403
 404config TOUCHSCREEN_GOODIX
 405	tristate "Goodix I2C touchscreen"
 406	depends on I2C
 407	depends on GPIOLIB || COMPILE_TEST
 408	help
 409	  Say Y here if you have the Goodix touchscreen (such as one
 410	  installed in Onda v975w tablets) connected to your
 411	  system. It also supports 5-finger chip models, which can be
 412	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 413
 414	  If unsure, say N.
 415
 416	  To compile this driver as a module, choose M here: the
 417	  module will be called goodix.
 418
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 419config TOUCHSCREEN_HIDEEP
 420	tristate "HiDeep Touch IC"
 421	depends on I2C
 422	help
 423	  Say Y here if you have a touchscreen using HiDeep.
 424
 425	  If unsure, say N.
 426
 427	  To compile this driver as a module, choose M here : the
 428	  module will be called hideep_ts.
 429
 430config TOUCHSCREEN_HYCON_HY46XX
 431	tristate "Hycon hy46xx touchscreen support"
 432	depends on I2C
 433	help
 434	  Say Y here if you have a touchscreen using Hycon hy46xx
 435
 436	  If unsure, say N.
 437
 438	  To compile this driver as a module, choose M here: the
 439	  module will be called hycon-hy46xx.
 440
 441config TOUCHSCREEN_HYNITRON_CSTXXX
 442	tristate "Hynitron touchscreen support"
 443	depends on I2C
 444	help
 445	  Say Y here if you have a touchscreen using a Hynitron
 446	  touchscreen controller.
 447
 448	  If unsure, say N.
 449
 450	  To compile this driver as a module, choose M here: the
 451	  module will be called hynitron-cstxxx.
 452
 453config TOUCHSCREEN_ILI210X
 454	tristate "Ilitek ILI210X based touchscreen"
 455	depends on I2C
 456	select CRC_CCITT
 457	help
 458	  Say Y here if you have a ILI210X based touchscreen
 459	  controller. This driver supports models ILI2102,
 460	  ILI2102s, ILI2103, ILI2103s and ILI2105.
 461	  Such kind of chipsets can be found in Amazon Kindle Fire
 462	  touchscreens.
 463
 464	  If unsure, say N.
 465
 466	  To compile this driver as a module, choose M here: the
 467	  module will be called ili210x.
 468
 469config TOUCHSCREEN_ILITEK
 470	tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
 471	depends on I2C
 472	help
 473	  Say Y here if you have touchscreen with ILITEK touch IC,
 474	  it supports 213X/23XX/25XX and other Lego series.
 475
 476	  If unsure, say N.
 477
 478	  To compile this driver as a module, choose M here: the
 479	  module will be called ilitek_ts_i2c.
 480
 481config TOUCHSCREEN_IPROC
 482	tristate "IPROC touch panel driver support"
 483	depends on ARCH_BCM_IPROC || COMPILE_TEST
 484	help
 485	  Say Y here if you want to add support for the IPROC touch
 486	  controller to your system.
 487
 488	  If unsure, say N.
 489
 490	  To compile this driver as a module, choose M here: the
 491	  module will be called bcm_iproc_tsc.
 492
 493config TOUCHSCREEN_S3C2410
 494	tristate "Samsung S3C2410/generic touchscreen input driver"
 495	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 496	depends on S3C_ADC
 497	help
 498	  Say Y here if you have the s3c2410 touchscreen.
 499
 500	  If unsure, say N.
 501
 502	  To compile this driver as a module, choose M here: the
 503	  module will be called s3c2410_ts.
 504
 505config TOUCHSCREEN_S6SY761
 506	tristate "Samsung S6SY761 Touchscreen driver"
 507	depends on I2C
 508	help
 509	  Say Y if you have the Samsung S6SY761 driver
 510
 511	  If unsure, say N
 512
 513	  To compile this driver as module, choose M here: the
 514	  module will be called s6sy761.
 515
 516config TOUCHSCREEN_GUNZE
 517	tristate "Gunze AHL-51S touchscreen"
 518	select SERIO
 519	help
 520	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
 521	  your system.
 522
 523	  If unsure, say N.
 524
 525	  To compile this driver as a module, choose M here: the
 526	  module will be called gunze.
 527
 528config TOUCHSCREEN_EKTF2127
 529	tristate "Elan eKTF2127 I2C touchscreen"
 530	depends on I2C
 531	help
 532	  Say Y here if you have an Elan eKTF2127 touchscreen
 533	  connected to your system.
 534
 535	  If unsure, say N.
 536
 537	  To compile this driver as a module, choose M here: the
 538	  module will be called ektf2127.
 539
 540config TOUCHSCREEN_ELAN
 541	tristate "Elan eKTH I2C touchscreen"
 542	depends on I2C
 543	help
 544	  Say Y here if you have an Elan eKTH I2C touchscreen
 545	  connected to your system.
 546
 547	  If unsure, say N.
 548
 549	  To compile this driver as a module, choose M here: the
 550	  module will be called elants_i2c.
 551
 552config TOUCHSCREEN_ELO
 553	tristate "Elo serial touchscreens"
 554	select SERIO
 555	help
 556	  Say Y here if you have an Elo serial touchscreen connected to
 557	  your system.
 558
 559	  If unsure, say N.
 560
 561	  To compile this driver as a module, choose M here: the
 562	  module will be called elo.
 563
 564config TOUCHSCREEN_WACOM_W8001
 565	tristate "Wacom W8001 penabled serial touchscreen"
 566	select SERIO
 567	help
 568	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
 569	  connected to your system.
 570
 571	  If unsure, say N.
 572
 573	  To compile this driver as a module, choose M here: the
 574	  module will be called wacom_w8001.
 575
 576config TOUCHSCREEN_WACOM_I2C
 577	tristate "Wacom Tablet support (I2C)"
 578	depends on I2C
 579	help
 580	  Say Y here if you want to use the I2C version of the Wacom
 581	  Pen Tablet.
 582
 583	  If unsure, say N.
 584
 585	  To compile this driver as a module, choose M here: the module
 586	  will be called wacom_i2c.
 587
 588config TOUCHSCREEN_LPC32XX
 589	tristate "LPC32XX touchscreen controller"
 590	depends on ARCH_LPC32XX
 591	help
 592	  Say Y here if you have a LPC32XX device and want
 593	  to support the built-in touchscreen.
 594
 595	  To compile this driver as a module, choose M here: the
 596	  module will be called lpc32xx_ts.
 597
 598config TOUCHSCREEN_MAX11801
 599	tristate "MAX11801 based touchscreens"
 600	depends on I2C
 601	help
 602	  Say Y here if you have a MAX11801 based touchscreen
 603	  controller.
 604
 605	  If unsure, say N.
 606
 607	  To compile this driver as a module, choose M here: the
 608	  module will be called max11801_ts.
 609
 610config TOUCHSCREEN_MCS5000
 611	tristate "MELFAS MCS-5000 touchscreen"
 612	depends on I2C
 613	help
 614	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 615	  chip in your system.
 616
 617	  If unsure, say N.
 618
 619	  To compile this driver as a module, choose M here: the
 620	  module will be called mcs5000_ts.
 621
 622config TOUCHSCREEN_MMS114
 623	tristate "MELFAS MMS114 touchscreen"
 624	depends on I2C
 625	help
 626	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 627	  chip in your system.
 628
 629	  If unsure, say N.
 630
 631	  To compile this driver as a module, choose M here: the
 632	  module will be called mms114.
 633
 634config TOUCHSCREEN_MELFAS_MIP4
 635	tristate "MELFAS MIP4 Touchscreen"
 636	depends on I2C
 637	help
 638	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
 639
 640	  If unsure, say N.
 641
 642	  To compile this driver as a module, choose M here:
 643	  the module will be called melfas_mip4.
 644
 645config TOUCHSCREEN_MSG2638
 646	tristate "MStar msg2638 touchscreen support"
 647	depends on I2C
 648	depends on GPIOLIB || COMPILE_TEST
 649	help
 650	  Say Y here if you have an I2C touchscreen using MStar msg2638.
 651
 652	  If unsure, say N.
 653
 654	  To compile this driver as a module, choose M here: the
 655	  module will be called msg2638.
 656
 657config TOUCHSCREEN_MTOUCH
 658	tristate "MicroTouch serial touchscreens"
 659	select SERIO
 660	help
 661	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 662	  your system.
 663
 664	  If unsure, say N.
 665
 666	  To compile this driver as a module, choose M here: the
 667	  module will be called mtouch.
 668
 
 
 
 
 
 
 
 
 
 
 669config TOUCHSCREEN_IMAGIS
 670	tristate "Imagis touchscreen support"
 671	depends on I2C
 672	help
 673	  Say Y here if you have an Imagis IST30xxC touchscreen.
 674	  If unsure, say N.
 675
 676	  To compile this driver as a module, choose M here: the
 677	  module will be called imagis.
 678
 679config TOUCHSCREEN_IMX6UL_TSC
 680	tristate "Freescale i.MX6UL touchscreen controller"
 681	depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
 682	help
 683	  Say Y here if you have a Freescale i.MX6UL, and want to
 684	  use the internal touchscreen controller.
 685
 686	  If unsure, say N.
 687
 688	  To compile this driver as a module, choose M here: the
 689	  module will be called imx6ul_tsc.
 690
 691config TOUCHSCREEN_INEXIO
 692	tristate "iNexio serial touchscreens"
 693	select SERIO
 694	help
 695	  Say Y here if you have an iNexio serial touchscreen connected to
 696	  your system.
 697
 698	  If unsure, say N.
 699
 700	  To compile this driver as a module, choose M here: the
 701	  module will be called inexio.
 702
 703config TOUCHSCREEN_MK712
 704	tristate "ICS MicroClock MK712 touchscreen"
 
 705	help
 706	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 707	  controller chip in your system.
 708
 709	  If unsure, say N.
 710
 711	  To compile this driver as a module, choose M here: the
 712	  module will be called mk712.
 713
 714config TOUCHSCREEN_HP600
 715	tristate "HP Jornada 6xx touchscreen"
 716	depends on SH_HP6XX && SH_ADC
 717	help
 718	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
 719	  support the built-in touchscreen.
 720
 721	  To compile this driver as a module, choose M here: the
 722	  module will be called hp680_ts_input.
 723
 724config TOUCHSCREEN_HP7XX
 725	tristate "HP Jornada 7xx touchscreen"
 726	depends on SA1100_JORNADA720_SSP
 727	help
 728	  Say Y here if you have a HP Jornada 710/720/728 and want
 729	  to support the built-in touchscreen.
 730
 731	  To compile this driver as a module, choose M here: the
 732	  module will be called jornada720_ts.
 733
 734config TOUCHSCREEN_IPAQ_MICRO
 735	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 736	depends on MFD_IPAQ_MICRO
 737	help
 738	  Say Y here to enable support for the touchscreen attached to
 739	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 740
 741	  If unsure, say N.
 742
 743	  To compile this driver as a module, choose M here: the
 744	  module will be called ipaq-micro-ts.
 745
 746config TOUCHSCREEN_HTCPEN
 747	tristate "HTC Shift X9500 touchscreen"
 748	depends on ISA
 749	help
 750	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 751	  Clio / Shangrila and want to support the built-in touchscreen.
 752
 753	  If unsure, say N.
 754
 755	  To compile this driver as a module, choose M here: the
 756	  module will be called htcpen.
 757
 758config TOUCHSCREEN_PENMOUNT
 759	tristate "Penmount serial touchscreen"
 760	select SERIO
 761	help
 762	  Say Y here if you have a Penmount serial touchscreen connected to
 763	  your system.
 764
 765	  If unsure, say N.
 766
 767	  To compile this driver as a module, choose M here: the
 768	  module will be called penmount.
 769
 770config TOUCHSCREEN_EDT_FT5X06
 771	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 772	depends on I2C
 
 773	help
 774	  Say Y here if you have an EDT "Polytouch" touchscreen based
 775	  on the FocalTech FT5x06 family of controllers connected to
 776	  your system.
 777
 778	  If unsure, say N.
 779
 780	  To compile this driver as a module, choose M here: the
 781	  module will be called edt-ft5x06.
 782
 783config TOUCHSCREEN_RASPBERRYPI_FW
 784	tristate "Raspberry Pi's firmware base touch screen support"
 785	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
 786	help
 787	  Say Y here if you have the official Raspberry Pi 7 inch screen on
 788	  your system.
 789
 790	  If unsure, say N.
 791
 792	  To compile this driver as a module, choose M here: the
 793	  module will be called raspberrypi-ts.
 794
 795config TOUCHSCREEN_MIGOR
 796	tristate "Renesas MIGO-R touchscreen"
 797	depends on (SH_MIGOR || COMPILE_TEST) && I2C
 798	help
 799	  Say Y here to enable MIGO-R touchscreen support.
 800
 801	  If unsure, say N.
 802
 803	  To compile this driver as a module, choose M here: the
 804	  module will be called migor_ts.
 805
 806config TOUCHSCREEN_TOUCHRIGHT
 807	tristate "Touchright serial touchscreen"
 808	select SERIO
 809	help
 810	  Say Y here if you have a Touchright serial touchscreen connected to
 811	  your system.
 812
 813	  If unsure, say N.
 814
 815	  To compile this driver as a module, choose M here: the
 816	  module will be called touchright.
 817
 818config TOUCHSCREEN_TOUCHWIN
 819	tristate "Touchwin serial touchscreen"
 820	select SERIO
 821	help
 822	  Say Y here if you have a Touchwin serial touchscreen connected to
 823	  your system.
 824
 825	  If unsure, say N.
 826
 827	  To compile this driver as a module, choose M here: the
 828	  module will be called touchwin.
 829
 830config TOUCHSCREEN_TI_AM335X_TSC
 831	tristate "TI Touchscreen Interface"
 832	depends on MFD_TI_AM335X_TSCADC
 833	help
 834	  Say Y here if you have 4/5/8 wire touchscreen controller
 835	  to be connected to the ADC controller on your TI AM335x SoC.
 836
 837	  If unsure, say N.
 838
 839	  To compile this driver as a module, choose M here: the
 840	  module will be called ti_am335x_tsc.
 841
 842config TOUCHSCREEN_UCB1400
 843	tristate "Philips UCB1400 touchscreen"
 844	depends on AC97_BUS
 845	depends on UCB1400_CORE
 846	help
 847	  This enables support for the Philips UCB1400 touchscreen interface.
 848	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
 849	  will be initialized only after the ALSA subsystem has been
 850	  brought up and the UCB1400 detected.  You therefore have to
 851	  configure ALSA support as well (either built-in or modular,
 852	  independently of whether this driver is itself built-in or
 853	  modular) for this driver to work.
 854
 855	  To compile this driver as a module, choose M here: the
 856	  module will be called ucb1400_ts.
 857
 858config TOUCHSCREEN_PIXCIR
 859	tristate "PIXCIR I2C touchscreens"
 860	depends on I2C
 861	help
 862	  Say Y here if you have a pixcir i2c touchscreen
 863	  controller.
 864
 865	  If unsure, say N.
 866
 867	  To compile this driver as a module, choose M here: the
 868	  module will be called pixcir_i2c_ts.
 869
 870config TOUCHSCREEN_WDT87XX_I2C
 871	tristate "Weida HiTech I2C touchscreen"
 872	depends on I2C
 873	help
 874	  Say Y here if you have a Weida WDT87XX I2C touchscreen
 875	  connected to your system.
 876
 877	  If unsure, say N.
 878
 879	  To compile this driver as a module, choose M here: the
 880	  module will be called wdt87xx_i2c.
 881
 882config TOUCHSCREEN_WM831X
 883	tristate "Support for WM831x touchscreen controllers"
 884	depends on MFD_WM831X
 885	help
 886	  This enables support for the touchscreen controller on the WM831x
 887	  series of PMICs.
 888
 889	  To compile this driver as a module, choose M here: the
 890	  module will be called wm831x-ts.
 891
 892config TOUCHSCREEN_WM97XX
 893	tristate "Support for WM97xx AC97 touchscreen controllers"
 894	depends on AC97_BUS || AC97_BUS_NEW
 895	help
 896	  Say Y here if you have a Wolfson Microelectronics WM97xx
 897	  touchscreen connected to your system. Note that this option
 898	  only enables core driver, you will also need to select
 899	  support for appropriate chip below.
 900
 901	  If unsure, say N.
 902
 903	  To compile this driver as a module, choose M here: the
 904	  module will be called wm97xx-ts.
 905
 906config TOUCHSCREEN_WM9705
 907	bool "WM9705 Touchscreen interface support"
 908	depends on TOUCHSCREEN_WM97XX
 909	default y
 910	help
 911	  Say Y here to enable support for the Wolfson Microelectronics
 912	  WM9705 touchscreen controller.
 913
 914config TOUCHSCREEN_WM9712
 915	bool "WM9712 Touchscreen interface support"
 916	depends on TOUCHSCREEN_WM97XX
 917	default y
 918	help
 919	  Say Y here to enable support for the Wolfson Microelectronics
 920	  WM9712 touchscreen controller.
 921
 922config TOUCHSCREEN_WM9713
 923	bool "WM9713 Touchscreen interface support"
 924	depends on TOUCHSCREEN_WM97XX
 925	default y
 926	help
 927	  Say Y here to enable support for the Wolfson Microelectronics
 928	  WM9713 touchscreen controller.
 929
 930config TOUCHSCREEN_WM97XX_MAINSTONE
 931	tristate "WM97xx Mainstone/Palm accelerated touch"
 932	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 933	depends on SND_PXA2XX_LIB_AC97
 934	help
 935	  Say Y here for support for streaming mode with WM97xx touchscreens
 936	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 937
 938	  If unsure, say N.
 939
 940	  To compile this driver as a module, choose M here: the
 941	  module will be called mainstone-wm97xx.
 942
 943config TOUCHSCREEN_WM97XX_ZYLONITE
 944	tristate "Zylonite accelerated touch"
 945	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 946	depends on SND_PXA2XX_LIB_AC97
 947	select TOUCHSCREEN_WM9713
 948	help
 949	  Say Y here for support for streaming mode with the touchscreen
 950	  on Zylonite systems.
 951
 952	  If unsure, say N.
 953
 954	  To compile this driver as a module, choose M here: the
 955	  module will be called zylonite-wm97xx.
 956
 957config TOUCHSCREEN_USB_COMPOSITE
 958	tristate "USB Touchscreen Driver"
 959	depends on USB_ARCH_HAS_HCD
 960	select USB
 961	help
 962	  USB Touchscreen driver for:
 963	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 964	  - PanJit TouchSet USB
 965	  - 3M MicroTouch USB (EX II series)
 966	  - ITM
 967	  - some other eTurboTouch
 968	  - Gunze AHL61
 969	  - DMC TSC-10/25
 970	  - IRTOUCHSYSTEMS/UNITOP
 971	  - IdealTEK URTC1000
 972	  - GoTop Super_Q2/GogoPen/PenPower tablets
 973	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 974	  - Zytronic controllers
 975	  - Elo TouchSystems 2700 IntelliTouch
 976	  - EasyTouch USB Touch Controller from Data Module
 977	  - e2i (Mimo monitors)
 978
 979	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 980	  a usage description and the required user-space stuff.
 981
 982	  To compile this driver as a module, choose M here: the
 983	  module will be called usbtouchscreen.
 984
 985config TOUCHSCREEN_MXS_LRADC
 986	tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
 987	depends on MFD_MXS_LRADC
 988	help
 989	  Say Y here if you have a touchscreen connected to the low-resolution
 990	  analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
 991
 992	  To compile this driver as a module, choose M here: the module will be
 993	  called mxs-lradc-ts.
 994
 995config TOUCHSCREEN_MX25
 996	tristate "Freescale i.MX25 touchscreen input driver"
 997	depends on MFD_MX25_TSADC
 998	help
 999	  Enable support for touchscreen connected to your i.MX25.
1000
1001	  To compile this driver as a module, choose M here: the
1002	  module will be called fsl-imx25-tcq.
1003
1004config TOUCHSCREEN_MC13783
1005	tristate "Freescale MC13783 touchscreen input driver"
1006	depends on MFD_MC13XXX
1007	help
1008	  Say Y here if you have an Freescale MC13783 PMIC on your
1009	  board and want to use its touchscreen
1010
1011	  If unsure, say N.
1012
1013	  To compile this driver as a module, choose M here: the
1014	  module will be called mc13783_ts.
1015
1016config TOUCHSCREEN_USB_EGALAX
1017	default y
1018	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
1019	depends on TOUCHSCREEN_USB_COMPOSITE
1020
1021config TOUCHSCREEN_USB_PANJIT
1022	default y
1023	bool "PanJit device support" if EXPERT
1024	depends on TOUCHSCREEN_USB_COMPOSITE
1025
1026config TOUCHSCREEN_USB_3M
1027	default y
1028	bool "3M/Microtouch EX II series device support" if EXPERT
1029	depends on TOUCHSCREEN_USB_COMPOSITE
1030
1031config TOUCHSCREEN_USB_ITM
1032	default y
1033	bool "ITM device support" if EXPERT
1034	depends on TOUCHSCREEN_USB_COMPOSITE
1035
1036config TOUCHSCREEN_USB_ETURBO
1037	default y
1038	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1039	depends on TOUCHSCREEN_USB_COMPOSITE
1040
1041config TOUCHSCREEN_USB_GUNZE
1042	default y
1043	bool "Gunze AHL61 device support" if EXPERT
1044	depends on TOUCHSCREEN_USB_COMPOSITE
1045
1046config TOUCHSCREEN_USB_DMC_TSC10
1047	default y
1048	bool "DMC TSC-10/25 device support" if EXPERT
1049	depends on TOUCHSCREEN_USB_COMPOSITE
1050
1051config TOUCHSCREEN_USB_IRTOUCH
1052	default y
1053	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1054	depends on TOUCHSCREEN_USB_COMPOSITE
1055
1056config TOUCHSCREEN_USB_IDEALTEK
1057	default y
1058	bool "IdealTEK URTC1000 device support" if EXPERT
1059	depends on TOUCHSCREEN_USB_COMPOSITE
1060
1061config TOUCHSCREEN_USB_GENERAL_TOUCH
1062	default y
1063	bool "GeneralTouch Touchscreen device support" if EXPERT
1064	depends on TOUCHSCREEN_USB_COMPOSITE
1065
1066config TOUCHSCREEN_USB_GOTOP
1067	default y
1068	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1069	depends on TOUCHSCREEN_USB_COMPOSITE
1070
1071config TOUCHSCREEN_USB_JASTEC
1072	default y
1073	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1074	depends on TOUCHSCREEN_USB_COMPOSITE
1075
1076config TOUCHSCREEN_USB_ELO
1077	default y
1078	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1079	depends on TOUCHSCREEN_USB_COMPOSITE
1080
1081config TOUCHSCREEN_USB_E2I
1082	default y
1083	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1084	depends on TOUCHSCREEN_USB_COMPOSITE
1085
1086config TOUCHSCREEN_USB_ZYTRONIC
1087	default y
1088	bool "Zytronic controller" if EXPERT
1089	depends on TOUCHSCREEN_USB_COMPOSITE
1090
1091config TOUCHSCREEN_USB_ETT_TC45USB
1092	default y
1093	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1094	depends on TOUCHSCREEN_USB_COMPOSITE
1095
1096config TOUCHSCREEN_USB_NEXIO
1097	default y
1098	bool "NEXIO/iNexio device support" if EXPERT
1099	depends on TOUCHSCREEN_USB_COMPOSITE
1100
1101config TOUCHSCREEN_USB_EASYTOUCH
1102	default y
1103	bool "EasyTouch USB Touch controller device support" if EXPERT
1104	depends on TOUCHSCREEN_USB_COMPOSITE
1105	help
1106	  Say Y here if you have an EasyTouch USB Touch controller.
1107	  If unsure, say N.
1108
1109config TOUCHSCREEN_TOUCHIT213
1110	tristate "Sahara TouchIT-213 touchscreen"
1111	select SERIO
1112	help
1113	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1114
1115	  If unsure, say N.
1116
1117	  To compile this driver as a module, choose M here: the
1118	  module will be called touchit213.
1119
1120config TOUCHSCREEN_TS4800
1121	tristate "TS-4800 touchscreen"
1122	depends on HAS_IOMEM && OF
1123	depends on SOC_IMX51 || COMPILE_TEST
1124	select MFD_SYSCON
1125	help
1126	  Say Y here if you have a touchscreen on a TS-4800 board.
1127
1128	  On TS-4800, the touchscreen is not handled directly by Linux but by
1129	  a companion FPGA.
1130
1131	  If unsure, say N.
1132
1133	  To compile this driver as a module, choose M here: the
1134	  module will be called ts4800_ts.
1135
1136config TOUCHSCREEN_TSC_SERIO
1137	tristate "TSC-10/25/40 serial touchscreen support"
1138	select SERIO
1139	help
1140	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1141	  to your system.
1142
1143	  If unsure, say N.
1144
1145	  To compile this driver as a module, choose M here: the
1146	  module will be called tsc40.
1147
1148config TOUCHSCREEN_TSC200X_CORE
1149	tristate
1150
1151config TOUCHSCREEN_TSC2004
1152	tristate "TSC2004 based touchscreens"
1153	depends on I2C
1154	select REGMAP_I2C
1155	select TOUCHSCREEN_TSC200X_CORE
1156	help
1157	  Say Y here if you have a TSC2004 based touchscreen.
1158
1159	  If unsure, say N.
1160
1161	  To compile this driver as a module, choose M here: the
1162	  module will be called tsc2004.
1163
1164config TOUCHSCREEN_TSC2005
1165	tristate "TSC2005 based touchscreens"
1166	depends on SPI_MASTER
1167	select REGMAP_SPI
1168	select TOUCHSCREEN_TSC200X_CORE
1169	help
1170	  Say Y here if you have a TSC2005 based touchscreen.
1171
1172	  If unsure, say N.
1173
1174	  To compile this driver as a module, choose M here: the
1175	  module will be called tsc2005.
1176
1177config TOUCHSCREEN_TSC2007
1178	tristate "TSC2007 based touchscreens"
1179	depends on I2C
1180	help
1181	  Say Y here if you have a TSC2007 based touchscreen.
1182
1183	  If unsure, say N.
1184
1185	  To compile this driver as a module, choose M here: the
1186	  module will be called tsc2007.
1187
1188config TOUCHSCREEN_TSC2007_IIO
1189	bool "IIO interface for external ADC input and temperature"
1190	depends on TOUCHSCREEN_TSC2007
1191	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1192	help
1193	  Saying Y here adds an iio interface to the tsc2007 which
1194	  provides values for the AUX input (used for e.g. battery
1195	  or ambient light monitoring), temperature and raw input
1196	  values.
1197
1198config TOUCHSCREEN_PCAP
1199	tristate "Motorola PCAP touchscreen"
1200	depends on EZX_PCAP
1201	help
1202	  Say Y here if you have a Motorola EZX telephone and
1203	  want to enable support for the built-in touchscreen.
1204
1205	  To compile this driver as a module, choose M here: the
1206	  module will be called pcap_ts.
1207
1208config TOUCHSCREEN_RM_TS
1209	tristate "Raydium I2C Touchscreen"
1210	depends on I2C
1211	depends on GPIOLIB || COMPILE_TEST
1212	help
1213	  Say Y here if you have Raydium series I2C touchscreen,
1214	  such as RM32380, connected to your system.
1215
1216	  If unsure, say N.
1217
1218	  To compile this driver as a module, choose M here: the
1219	  module will be called raydium_i2c_ts.
1220
1221config TOUCHSCREEN_SILEAD
1222	tristate "Silead I2C touchscreen"
1223	depends on I2C
1224	help
1225	  Say Y here if you have the Silead touchscreen connected to
1226	  your system.
1227
1228	  If unsure, say N.
1229
1230	  To compile this driver as a module, choose M here: the
1231	  module will be called silead.
1232
1233config TOUCHSCREEN_SIS_I2C
1234	tristate "SiS 9200 family I2C touchscreen"
1235	depends on I2C
1236	select CRC_ITU_T
1237	depends on GPIOLIB || COMPILE_TEST
1238	help
1239	  This enables support for SiS 9200 family over I2C based touchscreens.
1240
1241	  If unsure, say N.
1242
1243	  To compile this driver as a module, choose M here: the
1244	  module will be called sis_i2c.
1245
1246config TOUCHSCREEN_ST1232
1247	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1248	depends on I2C
1249	help
1250	  Say Y here if you want to support the Sitronix ST1232
1251	  or ST1633 touchscreen controller.
1252
1253	  If unsure, say N.
1254
1255	  To compile this driver as a module, choose M here: the
1256	  module will be called st1232_ts.
1257
1258config TOUCHSCREEN_STMFTS
1259	tristate "STMicroelectronics STMFTS touchscreen"
1260	depends on I2C
1261	depends on LEDS_CLASS
1262	help
1263	  Say Y here if you want support for STMicroelectronics
1264	  STMFTS touchscreen.
1265
1266	  To compile this driver as a module, choose M here: the
1267	  module will be called stmfts.
1268
1269config TOUCHSCREEN_STMPE
1270	tristate "STMicroelectronics STMPE touchscreens"
1271	depends on MFD_STMPE
1272	depends on OF
1273	help
1274	  Say Y here if you want support for STMicroelectronics
1275	  STMPE touchscreen controllers.
1276
1277	  To compile this driver as a module, choose M here: the
1278	  module will be called stmpe-ts.
1279
1280config TOUCHSCREEN_SUN4I
1281	tristate "Allwinner sun4i resistive touchscreen controller support"
1282	depends on ARCH_SUNXI || COMPILE_TEST
1283	depends on HWMON
1284	depends on THERMAL || !THERMAL_OF
1285	help
1286	  This selects support for the resistive touchscreen controller
1287	  found on Allwinner sunxi SoCs.
1288
1289	  To compile this driver as a module, choose M here: the
1290	  module will be called sun4i-ts.
1291
1292config TOUCHSCREEN_SUR40
1293	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1294	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1295	depends on VIDEO_DEV
1296	select VIDEOBUF2_DMA_SG
1297	help
1298	  Say Y here if you want support for the Samsung SUR40 touchscreen
1299	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1300
1301	  To compile this driver as a module, choose M here: the
1302	  module will be called sur40.
1303
1304config TOUCHSCREEN_SURFACE3_SPI
1305	tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1306	depends on SPI
1307	depends on GPIOLIB || COMPILE_TEST
1308	help
1309	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1310	  controller chip as found on the Surface 3 in your system.
1311
1312	  If unsure, say N.
1313
1314	  To compile this driver as a module, choose M here: the
1315	  module will be called surface3_spi.
1316
1317config TOUCHSCREEN_SX8654
1318	tristate "Semtech SX8654 touchscreen"
1319	depends on I2C
1320	help
1321	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1322
1323	  If unsure, say N
1324
1325	  To compile this driver as a module, choose M here: the
1326	  module will be called sx8654.
1327
1328config TOUCHSCREEN_TPS6507X
1329	tristate "TPS6507x based touchscreens"
1330	depends on I2C
1331	help
1332	  Say Y here if you have a TPS6507x based touchscreen
1333	  controller.
1334
1335	  If unsure, say N.
1336
1337	  To compile this driver as a module, choose M here: the
1338	  module will be called tps6507x_ts.
1339
1340config TOUCHSCREEN_ZET6223
1341	tristate "Zeitec ZET6223 touchscreen driver"
1342	depends on I2C
1343	help
1344	  Say Y here if you have a touchscreen using Zeitec ZET6223
1345
1346	  If unsure, say N.
1347
1348	  To compile this driver as a module, choose M here: the
1349	  module will be called zet6223.
1350
1351config TOUCHSCREEN_ZFORCE
1352	tristate "Neonode zForce infrared touchscreens"
1353	depends on I2C
1354	depends on GPIOLIB || COMPILE_TEST
1355	help
1356	  Say Y here if you have a touchscreen using the zforce
1357	  infraread technology from Neonode.
1358
1359	  If unsure, say N.
1360
1361	  To compile this driver as a module, choose M here: the
1362	  module will be called zforce_ts.
1363
1364config TOUCHSCREEN_COLIBRI_VF50
1365	tristate "Toradex Colibri on board touchscreen driver"
1366	depends on IIO
1367	depends on GPIOLIB || COMPILE_TEST
1368	help
1369	  Say Y here if you have a Colibri VF50 and plan to use
1370	  the on-board provided 4-wire touchscreen driver.
1371
1372	  If unsure, say N.
1373
1374	  To compile this driver as a module, choose M here: the
1375	  module will be called colibri_vf50_ts.
1376
1377config TOUCHSCREEN_ROHM_BU21023
1378	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1379	depends on I2C
1380	help
1381	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1382
1383	  If unsure, say N.
1384
1385	  To compile this driver as a module, choose M here: the
1386	  module will be called bu21023_ts.
1387
1388config TOUCHSCREEN_IQS5XX
1389	tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1390	depends on I2C
1391	help
1392	  Say Y to enable support for the Azoteq IQS550/572/525
1393	  family of trackpad/touchscreen controllers.
1394
1395	  To compile this driver as a module, choose M here: the
1396	  module will be called iqs5xx.
 
 
 
 
 
 
 
 
 
 
1397
1398config TOUCHSCREEN_ZINITIX
1399	tristate "Zinitix touchscreen support"
1400	depends on I2C
1401	help
1402	  Say Y here if you have a touchscreen using Zinitix bt541,
1403	  or something similar enough.
1404
1405	  If unsure, say N.
1406
1407	  To compile this driver as a module, choose M here: the
1408	  module will be called zinitix.
1409
1410config TOUCHSCREEN_HIMAX_HX83112B
1411	tristate "Himax hx83112b touchscreen driver"
1412	depends on I2C
1413	select REGMAP_I2C
1414	help
1415	  Say Y here to enable support for Himax hx83112b touchscreens.
1416
1417	  If unsure, say N.
1418
1419	  To compile this driver as a module, choose M here: the
1420	  module will be called himax_hx83112b.
1421
1422endif

   1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# Touchscreen driver configuration
   4#
   5menuconfig INPUT_TOUCHSCREEN
   6	bool "Touchscreens"
   7	help
   8	  Say Y here, and a list of supported touchscreens will be displayed.
   9	  This option doesn't affect the kernel.
  10
  11	  If unsure, say Y.
  12
  13if INPUT_TOUCHSCREEN
  14
  15config TOUCHSCREEN_88PM860X
  16	tristate "Marvell 88PM860x touchscreen"
  17	depends on MFD_88PM860X
  18	help
  19	  Say Y here if you have a 88PM860x PMIC and want to enable
  20	  support for the built-in touchscreen.
  21
  22	  If unsure, say N.
  23
  24	  To compile this driver as a module, choose M here: the
  25	  module will be called 88pm860x-ts.
  26
  27config TOUCHSCREEN_ADS7846
  28	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  29	depends on SPI_MASTER
  30	depends on HWMON = n || HWMON
  31	help
  32	  Say Y here if you have a touchscreen interface using the
  33	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  34	  and your board-specific setup code includes that in its
  35	  table of SPI devices.
  36
  37	  If HWMON is selected, and the driver is told the reference voltage
  38	  on your board, you will also get hwmon interfaces for the voltage
  39	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  40
  41	  If unsure, say N (but it's safe to say "Y").
  42
  43	  To compile this driver as a module, choose M here: the
  44	  module will be called ads7846.
  45
  46config TOUCHSCREEN_AD7877
  47	tristate "AD7877 based touchscreens"
  48	depends on SPI_MASTER
  49	help
  50	  Say Y here if you have a touchscreen interface using the
  51	  AD7877 controller, and your board-specific initialization
  52	  code includes that in its table of SPI devices.
  53
  54	  If unsure, say N (but it's safe to say "Y").
  55
  56	  To compile this driver as a module, choose M here: the
  57	  module will be called ad7877.
  58
  59config TOUCHSCREEN_AD7879
  60	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  61	help
  62	  Say Y here if you want to support a touchscreen interface using
  63	  the AD7879-1/AD7889-1 controller.
  64
  65	  You should select a bus connection too.
  66
  67	  To compile this driver as a module, choose M here: the
  68	  module will be called ad7879.
  69
  70config TOUCHSCREEN_AD7879_I2C
  71	tristate "support I2C bus connection"
  72	depends on TOUCHSCREEN_AD7879 && I2C
  73	select REGMAP_I2C
  74	help
  75	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  76
  77	  To compile this driver as a module, choose M here: the
  78	  module will be called ad7879-i2c.
  79
  80config TOUCHSCREEN_AD7879_SPI
  81	tristate "support SPI bus connection"
  82	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  83	select REGMAP_SPI
  84	help
  85	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  86
  87	  If unsure, say N (but it's safe to say "Y").
  88
  89	  To compile this driver as a module, choose M here: the
  90	  module will be called ad7879-spi.
  91
  92config TOUCHSCREEN_ADC
  93	tristate "Generic ADC based resistive touchscreen"
  94	depends on IIO
  95	select IIO_BUFFER
  96	select IIO_BUFFER_CB
  97	help
  98	  Say Y here if you want to use the generic ADC
  99	  resistive touchscreen driver.
 100
 101	  If unsure, say N (but it's safe to say "Y").
 102
 103	  To compile this driver as a module, choose M here: the
 104	  module will be called resistive-adc-touch.ko.
 105
 106config TOUCHSCREEN_AR1021_I2C
 107	tristate "Microchip AR1020/1021 i2c touchscreen"
 108	depends on I2C && OF
 109	help
 110	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
 111	  controller chip in your system.
 112
 113	  If unsure, say N.
 114
 115	  To compile this driver as a module, choose M here: the
 116	  module will be called ar1021_i2c.
 117
 118config TOUCHSCREEN_ATMEL_MXT
 119	tristate "Atmel mXT I2C Touchscreen"
 120	depends on I2C
 121	select FW_LOADER
 122	help
 123	  Say Y here if you have Atmel mXT series I2C touchscreen,
 124	  such as AT42QT602240/ATMXT224, connected to your system.
 125
 126	  If unsure, say N.
 127
 128	  To compile this driver as a module, choose M here: the
 129	  module will be called atmel_mxt_ts.
 130
 131config TOUCHSCREEN_ATMEL_MXT_T37
 132	bool "Support T37 Diagnostic Data"
 133	depends on TOUCHSCREEN_ATMEL_MXT
 134	depends on VIDEO_DEV=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_DEV=m)
 135	select VIDEOBUF2_VMALLOC
 136	help
 137	  Say Y here if you want support to output data from the T37
 138	  Diagnostic Data object using a V4L device.
 139
 140config TOUCHSCREEN_AUO_PIXCIR
 141	tristate "AUO in-cell touchscreen using Pixcir ICs"
 142	depends on I2C
 143	depends on GPIOLIB || COMPILE_TEST
 144	help
 145	  Say Y here if you have a AUO display with in-cell touchscreen
 146	  using Pixcir ICs.
 147
 148	  If unsure, say N.
 149
 150	  To compile this driver as a module, choose M here: the
 151	  module will be called auo-pixcir-ts.
 152
 153config TOUCHSCREEN_BU21013
 154	tristate "BU21013 based touch panel controllers"
 155	depends on I2C
 156	help
 157	  Say Y here if you have a bu21013 touchscreen connected to
 158	  your system.
 159
 160	  If unsure, say N.
 161
 162	  To compile this driver as a module, choose M here: the
 163	  module will be called bu21013_ts.
 164
 165config TOUCHSCREEN_BU21029
 166	tristate "Rohm BU21029 based touch panel controllers"
 167	depends on I2C
 168	help
 169	  Say Y here if you have a Rohm BU21029 touchscreen controller
 170	  connected to your system.
 171
 172	  If unsure, say N.
 173
 174	  To compile this driver as a module, choose M here: the
 175	  module will be called bu21029_ts.
 176
 177config TOUCHSCREEN_CHIPONE_ICN8318
 178	tristate "chipone icn8318 touchscreen controller"
 179	depends on GPIOLIB || COMPILE_TEST
 180	depends on I2C
 181	depends on OF
 182	help
 183	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
 184
 185	  If unsure, say N.
 186
 187	  To compile this driver as a module, choose M here: the
 188	  module will be called chipone_icn8318.
 189
 190config TOUCHSCREEN_CHIPONE_ICN8505
 191	tristate "chipone icn8505 touchscreen controller"
 192	depends on I2C && ACPI
 193	help
 194	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
 195
 196	  If unsure, say N.
 197
 198	  To compile this driver as a module, choose M here: the
 199	  module will be called chipone_icn8505.
 200
 201config TOUCHSCREEN_CY8CTMA140
 202	tristate "cy8ctma140 touchscreen"
 203	depends on I2C
 204	help
 205	  Say Y here if you have a Cypress CY8CTMA140 capacitive
 206	  touchscreen also just known as "TMA140"
 207
 208	  If unsure, say N.
 209
 210	  To compile this driver as a module, choose M here: the
 211	  module will be called cy8ctma140.
 212
 213config TOUCHSCREEN_CY8CTMG110
 214	tristate "cy8ctmg110 touchscreen"
 215	depends on I2C
 216	depends on GPIOLIB || COMPILE_TEST
 217	help
 218	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 219	  an AAVA device.
 220
 221	  If unsure, say N.
 222
 223	  To compile this driver as a module, choose M here: the
 224	  module will be called cy8ctmg110_ts.
 225
 226config TOUCHSCREEN_CYTTSP_CORE
 227	tristate "Cypress TTSP touchscreen"
 228	help
 229	  Say Y here if you have a touchscreen using controller from
 230	  the Cypress TrueTouch(tm) Standard Product family connected
 231	  to your system. You will also need to select appropriate
 232	  bus connection below.
 233
 234	  If unsure, say N.
 235
 236	  To compile this driver as a module, choose M here: the
 237	  module will be called cyttsp_core.
 238
 239config TOUCHSCREEN_CYTTSP_I2C
 240	tristate "support I2C bus connection"
 241	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 242	help
 243	  Say Y here if the touchscreen is connected via I2C bus.
 244
 245	  To compile this driver as a module, choose M here: the
 246	  module will be called cyttsp_i2c.
 247
 248config TOUCHSCREEN_CYTTSP_SPI
 249	tristate "support SPI bus connection"
 250	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 251	help
 252	  Say Y here if the touchscreen is connected via SPI bus.
 253
 254	  To compile this driver as a module, choose M here: the
 255	  module will be called cyttsp_spi.
 256
 257config TOUCHSCREEN_CYTTSP4_CORE
 258	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
 259	help
 260	  Core driver for Cypress TrueTouch(tm) Standard Product
 261	  Generation4 touchscreen controllers.
 262
 263	  Say Y here if you have a Cypress Gen4 touchscreen.
 264
 265	  If unsure, say N.
 266
 267	  To compile this driver as a module, choose M here.
 268
 269config TOUCHSCREEN_CYTTSP4_I2C
 270	tristate "support I2C bus connection"
 271	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
 272	help
 273	  Say Y here if the touchscreen is connected via I2C bus.
 274
 275	  To compile this driver as a module, choose M here: the
 276	  module will be called cyttsp4_i2c.
 277
 278config TOUCHSCREEN_CYTTSP4_SPI
 279	tristate "support SPI bus connection"
 280	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
 281	help
 282	  Say Y here if the touchscreen is connected via SPI bus.
 283
 284	  To compile this driver as a module, choose M here: the
 285	  module will be called cyttsp4_spi.
 286
 287config TOUCHSCREEN_CYTTSP5
 288	tristate "Cypress TrueTouch Gen5 Touchscreen Driver"
 289	depends on I2C
 290	select REGMAP_I2C
 291	select CRC_ITU_T
 292	help
 293	  Driver for Parade TrueTouch Standard Product Generation 5
 294	  touchscreen controllers. I2C bus interface support only.
 295
 296	  Say Y here if you have a Cypress Gen5 touchscreen.
 297
 298	  If unsure, say N.
 299
 300	  To compile this driver as a module, choose M here: the
 301	  module will be called cyttsp5.
 302
 303config TOUCHSCREEN_DA9034
 304	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 305	depends on PMIC_DA903X
 306	default y
 307	help
 308	  Say Y here to enable the support for the touchscreen found
 309	  on Dialog Semiconductor DA9034 PMIC.
 310
 311	  If unsure, say N.
 312
 313	  To compile this driver as a module, choose M here: the
 314	  module will be called da9034-ts.
 315
 316config TOUCHSCREEN_DA9052
 317	tristate "Dialog DA9052/DA9053 TSI"
 318	depends on PMIC_DA9052
 319	help
 320	  Say Y here to support the touchscreen found on Dialog Semiconductor
 321	  DA9052-BC and DA9053-AA/Bx PMICs.
 322
 323	  If unsure, say N.
 324
 325	  To compile this driver as a module, choose M here: the
 326	  module will be called da9052_tsi.
 327
 328config TOUCHSCREEN_DYNAPRO
 329	tristate "Dynapro serial touchscreen"
 330	select SERIO
 331	help
 332	  Say Y here if you have a Dynapro serial touchscreen connected to
 333	  your system.
 334
 335	  If unsure, say N.
 336
 337	  To compile this driver as a module, choose M here: the
 338	  module will be called dynapro.
 339
 340config TOUCHSCREEN_HAMPSHIRE
 341	tristate "Hampshire serial touchscreen"
 342	select SERIO
 343	help
 344	  Say Y here if you have a Hampshire serial touchscreen connected to
 345	  your system.
 346
 347	  If unsure, say N.
 348
 349	  To compile this driver as a module, choose M here: the
 350	  module will be called hampshire.
 351
 352config TOUCHSCREEN_EETI
 353	tristate "EETI touchscreen panel support"
 354	depends on I2C
 355	help
 356	  Say Y here to enable support for I2C connected EETI touch panels.
 357
 358	  To compile this driver as a module, choose M here: the
 359	  module will be called eeti_ts.
 360
 361config TOUCHSCREEN_EGALAX
 362	tristate "EETI eGalax multi-touch panel support"
 363	depends on I2C && OF
 364	help
 365	  Say Y here to enable support for I2C connected EETI
 366	  eGalax multi-touch panels.
 367
 368	  To compile this driver as a module, choose M here: the
 369	  module will be called egalax_ts.
 370
 371config TOUCHSCREEN_EGALAX_SERIAL
 372	tristate "EETI eGalax serial touchscreen"
 373	select SERIO
 374	help
 375	  Say Y here to enable support for serial connected EETI
 376	  eGalax touch panels.
 377
 378	  To compile this driver as a module, choose M here: the
 379	  module will be called egalax_ts_serial.
 380
 381config TOUCHSCREEN_EXC3000
 382	tristate "EETI EXC3000 multi-touch panel support"
 383	depends on I2C
 384	help
 385	  Say Y here to enable support for I2C connected EETI
 386	  EXC3000 multi-touch panels.
 387
 388	  To compile this driver as a module, choose M here: the
 389	  module will be called exc3000.
 390
 391config TOUCHSCREEN_FUJITSU
 392	tristate "Fujitsu serial touchscreen"
 393	select SERIO
 394	help
 395	  Say Y here if you have the Fujitsu touchscreen (such as one
 396	  installed in Lifebook P series laptop) connected to your
 397	  system.
 398
 399	  If unsure, say N.
 400
 401	  To compile this driver as a module, choose M here: the
 402	  module will be called fujitsu-ts.
 403
 404config TOUCHSCREEN_GOODIX
 405	tristate "Goodix I2C touchscreen"
 406	depends on I2C
 407	depends on GPIOLIB || COMPILE_TEST
 408	help
 409	  Say Y here if you have the Goodix touchscreen (such as one
 410	  installed in Onda v975w tablets) connected to your
 411	  system. It also supports 5-finger chip models, which can be
 412	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 413
 414	  If unsure, say N.
 415
 416	  To compile this driver as a module, choose M here: the
 417	  module will be called goodix.
 418
 419config TOUCHSCREEN_GOODIX_BERLIN_CORE
 420	tristate
 421
 422config TOUCHSCREEN_GOODIX_BERLIN_I2C
 423	tristate "Goodix Berlin I2C touchscreen"
 424	depends on I2C
 425	select REGMAP_I2C
 426	select TOUCHSCREEN_GOODIX_BERLIN_CORE
 427	help
 428	  Say Y here if you have a Goodix Berlin IC connected to
 429	  your system via I2C.
 430
 431	  If unsure, say N.
 432
 433	  To compile this driver as a module, choose M here: the
 434	  module will be called goodix_berlin_i2c.
 435
 436config TOUCHSCREEN_GOODIX_BERLIN_SPI
 437	tristate "Goodix Berlin SPI touchscreen"
 438	depends on SPI_MASTER
 439	select REGMAP
 440	select TOUCHSCREEN_GOODIX_BERLIN_CORE
 441	help
 442	  Say Y here if you have a Goodix Berlin IC connected to
 443	  your system via SPI.
 444
 445	  If unsure, say N.
 446
 447	  To compile this driver as a module, choose M here: the
 448	  module will be called goodix_berlin_spi.
 449
 450config TOUCHSCREEN_HIDEEP
 451	tristate "HiDeep Touch IC"
 452	depends on I2C
 453	help
 454	  Say Y here if you have a touchscreen using HiDeep.
 455
 456	  If unsure, say N.
 457
 458	  To compile this driver as a module, choose M here : the
 459	  module will be called hideep_ts.
 460
 461config TOUCHSCREEN_HYCON_HY46XX
 462	tristate "Hycon hy46xx touchscreen support"
 463	depends on I2C
 464	help
 465	  Say Y here if you have a touchscreen using Hycon hy46xx
 466
 467	  If unsure, say N.
 468
 469	  To compile this driver as a module, choose M here: the
 470	  module will be called hycon-hy46xx.
 471
 472config TOUCHSCREEN_HYNITRON_CSTXXX
 473	tristate "Hynitron touchscreen support"
 474	depends on I2C
 475	help
 476	  Say Y here if you have a touchscreen using a Hynitron
 477	  touchscreen controller.
 478
 479	  If unsure, say N.
 480
 481	  To compile this driver as a module, choose M here: the
 482	  module will be called hynitron-cstxxx.
 483
 484config TOUCHSCREEN_ILI210X
 485	tristate "Ilitek ILI210X based touchscreen"
 486	depends on I2C
 487	select CRC_CCITT
 488	help
 489	  Say Y here if you have a ILI210X based touchscreen
 490	  controller. This driver supports models ILI2102,
 491	  ILI2102s, ILI2103, ILI2103s and ILI2105.
 492	  Such kind of chipsets can be found in Amazon Kindle Fire
 493	  touchscreens.
 494
 495	  If unsure, say N.
 496
 497	  To compile this driver as a module, choose M here: the
 498	  module will be called ili210x.
 499
 500config TOUCHSCREEN_ILITEK
 501	tristate "Ilitek I2C 213X/23XX/25XX/Lego Series Touch ICs"
 502	depends on I2C
 503	help
 504	  Say Y here if you have touchscreen with ILITEK touch IC,
 505	  it supports 213X/23XX/25XX and other Lego series.
 506
 507	  If unsure, say N.
 508
 509	  To compile this driver as a module, choose M here: the
 510	  module will be called ilitek_ts_i2c.
 511
 512config TOUCHSCREEN_IPROC
 513	tristate "IPROC touch panel driver support"
 514	depends on ARCH_BCM_IPROC || COMPILE_TEST
 515	help
 516	  Say Y here if you want to add support for the IPROC touch
 517	  controller to your system.
 518
 519	  If unsure, say N.
 520
 521	  To compile this driver as a module, choose M here: the
 522	  module will be called bcm_iproc_tsc.
 523
 
 
 
 
 
 
 
 
 
 
 
 
 524config TOUCHSCREEN_S6SY761
 525	tristate "Samsung S6SY761 Touchscreen driver"
 526	depends on I2C
 527	help
 528	  Say Y if you have the Samsung S6SY761 driver
 529
 530	  If unsure, say N
 531
 532	  To compile this driver as module, choose M here: the
 533	  module will be called s6sy761.
 534
 535config TOUCHSCREEN_GUNZE
 536	tristate "Gunze AHL-51S touchscreen"
 537	select SERIO
 538	help
 539	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
 540	  your system.
 541
 542	  If unsure, say N.
 543
 544	  To compile this driver as a module, choose M here: the
 545	  module will be called gunze.
 546
 547config TOUCHSCREEN_EKTF2127
 548	tristate "Elan eKTF2127 I2C touchscreen"
 549	depends on I2C
 550	help
 551	  Say Y here if you have an Elan eKTF2127 touchscreen
 552	  connected to your system.
 553
 554	  If unsure, say N.
 555
 556	  To compile this driver as a module, choose M here: the
 557	  module will be called ektf2127.
 558
 559config TOUCHSCREEN_ELAN
 560	tristate "Elan eKTH I2C touchscreen"
 561	depends on I2C
 562	help
 563	  Say Y here if you have an Elan eKTH I2C touchscreen
 564	  connected to your system.
 565
 566	  If unsure, say N.
 567
 568	  To compile this driver as a module, choose M here: the
 569	  module will be called elants_i2c.
 570
 571config TOUCHSCREEN_ELO
 572	tristate "Elo serial touchscreens"
 573	select SERIO
 574	help
 575	  Say Y here if you have an Elo serial touchscreen connected to
 576	  your system.
 577
 578	  If unsure, say N.
 579
 580	  To compile this driver as a module, choose M here: the
 581	  module will be called elo.
 582
 583config TOUCHSCREEN_WACOM_W8001
 584	tristate "Wacom W8001 penabled serial touchscreen"
 585	select SERIO
 586	help
 587	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
 588	  connected to your system.
 589
 590	  If unsure, say N.
 591
 592	  To compile this driver as a module, choose M here: the
 593	  module will be called wacom_w8001.
 594
 595config TOUCHSCREEN_WACOM_I2C
 596	tristate "Wacom Tablet support (I2C)"
 597	depends on I2C
 598	help
 599	  Say Y here if you want to use the I2C version of the Wacom
 600	  Pen Tablet.
 601
 602	  If unsure, say N.
 603
 604	  To compile this driver as a module, choose M here: the module
 605	  will be called wacom_i2c.
 606
 607config TOUCHSCREEN_LPC32XX
 608	tristate "LPC32XX touchscreen controller"
 609	depends on ARCH_LPC32XX
 610	help
 611	  Say Y here if you have a LPC32XX device and want
 612	  to support the built-in touchscreen.
 613
 614	  To compile this driver as a module, choose M here: the
 615	  module will be called lpc32xx_ts.
 616
 617config TOUCHSCREEN_MAX11801
 618	tristate "MAX11801 based touchscreens"
 619	depends on I2C
 620	help
 621	  Say Y here if you have a MAX11801 based touchscreen
 622	  controller.
 623
 624	  If unsure, say N.
 625
 626	  To compile this driver as a module, choose M here: the
 627	  module will be called max11801_ts.
 628
 629config TOUCHSCREEN_MCS5000
 630	tristate "MELFAS MCS-5000 touchscreen"
 631	depends on I2C
 632	help
 633	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 634	  chip in your system.
 635
 636	  If unsure, say N.
 637
 638	  To compile this driver as a module, choose M here: the
 639	  module will be called mcs5000_ts.
 640
 641config TOUCHSCREEN_MMS114
 642	tristate "MELFAS MMS114 touchscreen"
 643	depends on I2C
 644	help
 645	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 646	  chip in your system.
 647
 648	  If unsure, say N.
 649
 650	  To compile this driver as a module, choose M here: the
 651	  module will be called mms114.
 652
 653config TOUCHSCREEN_MELFAS_MIP4
 654	tristate "MELFAS MIP4 Touchscreen"
 655	depends on I2C
 656	help
 657	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
 658
 659	  If unsure, say N.
 660
 661	  To compile this driver as a module, choose M here:
 662	  the module will be called melfas_mip4.
 663
 664config TOUCHSCREEN_MSG2638
 665	tristate "MStar msg2638 touchscreen support"
 666	depends on I2C
 667	depends on GPIOLIB || COMPILE_TEST
 668	help
 669	  Say Y here if you have an I2C touchscreen using MStar msg2638.
 670
 671	  If unsure, say N.
 672
 673	  To compile this driver as a module, choose M here: the
 674	  module will be called msg2638.
 675
 676config TOUCHSCREEN_MTOUCH
 677	tristate "MicroTouch serial touchscreens"
 678	select SERIO
 679	help
 680	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 681	  your system.
 682
 683	  If unsure, say N.
 684
 685	  To compile this driver as a module, choose M here: the
 686	  module will be called mtouch.
 687
 688config TOUCHSCREEN_NOVATEK_NVT_TS
 689	tristate "Novatek NT11205 touchscreen support"
 690	depends on I2C
 691	help
 692	  Say Y here if you have a Novatek NT11205 touchscreen.
 693	  If unsure, say N.
 694
 695	  To compile this driver as a module, choose M here: the
 696	  module will be called novatek-nvt-ts.
 697
 698config TOUCHSCREEN_IMAGIS
 699	tristate "Imagis touchscreen support"
 700	depends on I2C
 701	help
 702	  Say Y here if you have an Imagis IST30xxC touchscreen.
 703	  If unsure, say N.
 704
 705	  To compile this driver as a module, choose M here: the
 706	  module will be called imagis.
 707
 708config TOUCHSCREEN_IMX6UL_TSC
 709	tristate "Freescale i.MX6UL touchscreen controller"
 710	depends on ((OF && GPIOLIB) || COMPILE_TEST) && HAS_IOMEM
 711	help
 712	  Say Y here if you have a Freescale i.MX6UL, and want to
 713	  use the internal touchscreen controller.
 714
 715	  If unsure, say N.
 716
 717	  To compile this driver as a module, choose M here: the
 718	  module will be called imx6ul_tsc.
 719
 720config TOUCHSCREEN_INEXIO
 721	tristate "iNexio serial touchscreens"
 722	select SERIO
 723	help
 724	  Say Y here if you have an iNexio serial touchscreen connected to
 725	  your system.
 726
 727	  If unsure, say N.
 728
 729	  To compile this driver as a module, choose M here: the
 730	  module will be called inexio.
 731
 732config TOUCHSCREEN_MK712
 733	tristate "ICS MicroClock MK712 touchscreen"
 734	depends on ISA
 735	help
 736	  Say Y here if you have the ICS MicroClock MK712 touchscreen
 737	  controller chip in your system.
 738
 739	  If unsure, say N.
 740
 741	  To compile this driver as a module, choose M here: the
 742	  module will be called mk712.
 743
 744config TOUCHSCREEN_HP600
 745	tristate "HP Jornada 6xx touchscreen"
 746	depends on SH_HP6XX && SH_ADC
 747	help
 748	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
 749	  support the built-in touchscreen.
 750
 751	  To compile this driver as a module, choose M here: the
 752	  module will be called hp680_ts_input.
 753
 754config TOUCHSCREEN_HP7XX
 755	tristate "HP Jornada 7xx touchscreen"
 756	depends on SA1100_JORNADA720_SSP
 757	help
 758	  Say Y here if you have a HP Jornada 710/720/728 and want
 759	  to support the built-in touchscreen.
 760
 761	  To compile this driver as a module, choose M here: the
 762	  module will be called jornada720_ts.
 763
 764config TOUCHSCREEN_IPAQ_MICRO
 765	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
 766	depends on MFD_IPAQ_MICRO
 767	help
 768	  Say Y here to enable support for the touchscreen attached to
 769	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
 770
 771	  If unsure, say N.
 772
 773	  To compile this driver as a module, choose M here: the
 774	  module will be called ipaq-micro-ts.
 775
 776config TOUCHSCREEN_HTCPEN
 777	tristate "HTC Shift X9500 touchscreen"
 778	depends on ISA
 779	help
 780	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 781	  Clio / Shangrila and want to support the built-in touchscreen.
 782
 783	  If unsure, say N.
 784
 785	  To compile this driver as a module, choose M here: the
 786	  module will be called htcpen.
 787
 788config TOUCHSCREEN_PENMOUNT
 789	tristate "Penmount serial touchscreen"
 790	select SERIO
 791	help
 792	  Say Y here if you have a Penmount serial touchscreen connected to
 793	  your system.
 794
 795	  If unsure, say N.
 796
 797	  To compile this driver as a module, choose M here: the
 798	  module will be called penmount.
 799
 800config TOUCHSCREEN_EDT_FT5X06
 801	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
 802	depends on I2C
 803	select REGMAP_I2C
 804	help
 805	  Say Y here if you have an EDT "Polytouch" touchscreen based
 806	  on the FocalTech FT5x06 family of controllers connected to
 807	  your system.
 808
 809	  If unsure, say N.
 810
 811	  To compile this driver as a module, choose M here: the
 812	  module will be called edt-ft5x06.
 813
 814config TOUCHSCREEN_RASPBERRYPI_FW
 815	tristate "Raspberry Pi's firmware base touch screen support"
 816	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
 817	help
 818	  Say Y here if you have the official Raspberry Pi 7 inch screen on
 819	  your system.
 820
 821	  If unsure, say N.
 822
 823	  To compile this driver as a module, choose M here: the
 824	  module will be called raspberrypi-ts.
 825
 826config TOUCHSCREEN_MIGOR
 827	tristate "Renesas MIGO-R touchscreen"
 828	depends on (SH_MIGOR || COMPILE_TEST) && I2C
 829	help
 830	  Say Y here to enable MIGO-R touchscreen support.
 831
 832	  If unsure, say N.
 833
 834	  To compile this driver as a module, choose M here: the
 835	  module will be called migor_ts.
 836
 837config TOUCHSCREEN_TOUCHRIGHT
 838	tristate "Touchright serial touchscreen"
 839	select SERIO
 840	help
 841	  Say Y here if you have a Touchright serial touchscreen connected to
 842	  your system.
 843
 844	  If unsure, say N.
 845
 846	  To compile this driver as a module, choose M here: the
 847	  module will be called touchright.
 848
 849config TOUCHSCREEN_TOUCHWIN
 850	tristate "Touchwin serial touchscreen"
 851	select SERIO
 852	help
 853	  Say Y here if you have a Touchwin serial touchscreen connected to
 854	  your system.
 855
 856	  If unsure, say N.
 857
 858	  To compile this driver as a module, choose M here: the
 859	  module will be called touchwin.
 860
 861config TOUCHSCREEN_TI_AM335X_TSC
 862	tristate "TI Touchscreen Interface"
 863	depends on MFD_TI_AM335X_TSCADC
 864	help
 865	  Say Y here if you have 4/5/8 wire touchscreen controller
 866	  to be connected to the ADC controller on your TI AM335x SoC.
 867
 868	  If unsure, say N.
 869
 870	  To compile this driver as a module, choose M here: the
 871	  module will be called ti_am335x_tsc.
 872
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 873config TOUCHSCREEN_PIXCIR
 874	tristate "PIXCIR I2C touchscreens"
 875	depends on I2C
 876	help
 877	  Say Y here if you have a pixcir i2c touchscreen
 878	  controller.
 879
 880	  If unsure, say N.
 881
 882	  To compile this driver as a module, choose M here: the
 883	  module will be called pixcir_i2c_ts.
 884
 885config TOUCHSCREEN_WDT87XX_I2C
 886	tristate "Weida HiTech I2C touchscreen"
 887	depends on I2C
 888	help
 889	  Say Y here if you have a Weida WDT87XX I2C touchscreen
 890	  connected to your system.
 891
 892	  If unsure, say N.
 893
 894	  To compile this driver as a module, choose M here: the
 895	  module will be called wdt87xx_i2c.
 896
 897config TOUCHSCREEN_WM831X
 898	tristate "Support for WM831x touchscreen controllers"
 899	depends on MFD_WM831X
 900	help
 901	  This enables support for the touchscreen controller on the WM831x
 902	  series of PMICs.
 903
 904	  To compile this driver as a module, choose M here: the
 905	  module will be called wm831x-ts.
 906
 907config TOUCHSCREEN_WM97XX
 908	tristate "Support for WM97xx AC97 touchscreen controllers"
 909	depends on AC97_BUS || AC97_BUS_NEW
 910	help
 911	  Say Y here if you have a Wolfson Microelectronics WM97xx
 912	  touchscreen connected to your system. Note that this option
 913	  only enables core driver, you will also need to select
 914	  support for appropriate chip below.
 915
 916	  If unsure, say N.
 917
 918	  To compile this driver as a module, choose M here: the
 919	  module will be called wm97xx-ts.
 920
 921config TOUCHSCREEN_WM9705
 922	bool "WM9705 Touchscreen interface support"
 923	depends on TOUCHSCREEN_WM97XX
 924	default y
 925	help
 926	  Say Y here to enable support for the Wolfson Microelectronics
 927	  WM9705 touchscreen controller.
 928
 929config TOUCHSCREEN_WM9712
 930	bool "WM9712 Touchscreen interface support"
 931	depends on TOUCHSCREEN_WM97XX
 932	default y
 933	help
 934	  Say Y here to enable support for the Wolfson Microelectronics
 935	  WM9712 touchscreen controller.
 936
 937config TOUCHSCREEN_WM9713
 938	bool "WM9713 Touchscreen interface support"
 939	depends on TOUCHSCREEN_WM97XX
 940	default y
 941	help
 942	  Say Y here to enable support for the Wolfson Microelectronics
 943	  WM9713 touchscreen controller.
 944
 945config TOUCHSCREEN_WM97XX_MAINSTONE
 946	tristate "WM97xx Mainstone/Palm accelerated touch"
 947	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 948	depends on SND_PXA2XX_LIB_AC97
 949	help
 950	  Say Y here for support for streaming mode with WM97xx touchscreens
 951	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 952
 953	  If unsure, say N.
 954
 955	  To compile this driver as a module, choose M here: the
 956	  module will be called mainstone-wm97xx.
 957
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 958config TOUCHSCREEN_USB_COMPOSITE
 959	tristate "USB Touchscreen Driver"
 960	depends on USB_ARCH_HAS_HCD
 961	select USB
 962	help
 963	  USB Touchscreen driver for:
 964	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 965	  - PanJit TouchSet USB
 966	  - 3M MicroTouch USB (EX II series)
 967	  - ITM
 968	  - some other eTurboTouch
 969	  - Gunze AHL61
 970	  - DMC TSC-10/25
 971	  - IRTOUCHSYSTEMS/UNITOP
 972	  - IdealTEK URTC1000
 973	  - GoTop Super_Q2/GogoPen/PenPower tablets
 974	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 975	  - Zytronic controllers
 976	  - Elo TouchSystems 2700 IntelliTouch
 977	  - EasyTouch USB Touch Controller from Data Module
 978	  - e2i (Mimo monitors)
 979
 980	  Have a look at <http://linux.chapter7.ch/touchkit/> for
 981	  a usage description and the required user-space stuff.
 982
 983	  To compile this driver as a module, choose M here: the
 984	  module will be called usbtouchscreen.
 985
 986config TOUCHSCREEN_MXS_LRADC
 987	tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
 988	depends on MFD_MXS_LRADC
 989	help
 990	  Say Y here if you have a touchscreen connected to the low-resolution
 991	  analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
 992
 993	  To compile this driver as a module, choose M here: the module will be
 994	  called mxs-lradc-ts.
 995
 996config TOUCHSCREEN_MX25
 997	tristate "Freescale i.MX25 touchscreen input driver"
 998	depends on MFD_MX25_TSADC
 999	help
1000	  Enable support for touchscreen connected to your i.MX25.
1001
1002	  To compile this driver as a module, choose M here: the
1003	  module will be called fsl-imx25-tcq.
1004
1005config TOUCHSCREEN_MC13783
1006	tristate "Freescale MC13783 touchscreen input driver"
1007	depends on MFD_MC13XXX
1008	help
1009	  Say Y here if you have an Freescale MC13783 PMIC on your
1010	  board and want to use its touchscreen
1011
1012	  If unsure, say N.
1013
1014	  To compile this driver as a module, choose M here: the
1015	  module will be called mc13783_ts.
1016
1017config TOUCHSCREEN_USB_EGALAX
1018	default y
1019	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
1020	depends on TOUCHSCREEN_USB_COMPOSITE
1021
1022config TOUCHSCREEN_USB_PANJIT
1023	default y
1024	bool "PanJit device support" if EXPERT
1025	depends on TOUCHSCREEN_USB_COMPOSITE
1026
1027config TOUCHSCREEN_USB_3M
1028	default y
1029	bool "3M/Microtouch EX II series device support" if EXPERT
1030	depends on TOUCHSCREEN_USB_COMPOSITE
1031
1032config TOUCHSCREEN_USB_ITM
1033	default y
1034	bool "ITM device support" if EXPERT
1035	depends on TOUCHSCREEN_USB_COMPOSITE
1036
1037config TOUCHSCREEN_USB_ETURBO
1038	default y
1039	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1040	depends on TOUCHSCREEN_USB_COMPOSITE
1041
1042config TOUCHSCREEN_USB_GUNZE
1043	default y
1044	bool "Gunze AHL61 device support" if EXPERT
1045	depends on TOUCHSCREEN_USB_COMPOSITE
1046
1047config TOUCHSCREEN_USB_DMC_TSC10
1048	default y
1049	bool "DMC TSC-10/25 device support" if EXPERT
1050	depends on TOUCHSCREEN_USB_COMPOSITE
1051
1052config TOUCHSCREEN_USB_IRTOUCH
1053	default y
1054	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1055	depends on TOUCHSCREEN_USB_COMPOSITE
1056
1057config TOUCHSCREEN_USB_IDEALTEK
1058	default y
1059	bool "IdealTEK URTC1000 device support" if EXPERT
1060	depends on TOUCHSCREEN_USB_COMPOSITE
1061
1062config TOUCHSCREEN_USB_GENERAL_TOUCH
1063	default y
1064	bool "GeneralTouch Touchscreen device support" if EXPERT
1065	depends on TOUCHSCREEN_USB_COMPOSITE
1066
1067config TOUCHSCREEN_USB_GOTOP
1068	default y
1069	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1070	depends on TOUCHSCREEN_USB_COMPOSITE
1071
1072config TOUCHSCREEN_USB_JASTEC
1073	default y
1074	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1075	depends on TOUCHSCREEN_USB_COMPOSITE
1076
1077config TOUCHSCREEN_USB_ELO
1078	default y
1079	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1080	depends on TOUCHSCREEN_USB_COMPOSITE
1081
1082config TOUCHSCREEN_USB_E2I
1083	default y
1084	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1085	depends on TOUCHSCREEN_USB_COMPOSITE
1086
1087config TOUCHSCREEN_USB_ZYTRONIC
1088	default y
1089	bool "Zytronic controller" if EXPERT
1090	depends on TOUCHSCREEN_USB_COMPOSITE
1091
1092config TOUCHSCREEN_USB_ETT_TC45USB
1093	default y
1094	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1095	depends on TOUCHSCREEN_USB_COMPOSITE
1096
1097config TOUCHSCREEN_USB_NEXIO
1098	default y
1099	bool "NEXIO/iNexio device support" if EXPERT
1100	depends on TOUCHSCREEN_USB_COMPOSITE
1101
1102config TOUCHSCREEN_USB_EASYTOUCH
1103	default y
1104	bool "EasyTouch USB Touch controller device support" if EXPERT
1105	depends on TOUCHSCREEN_USB_COMPOSITE
1106	help
1107	  Say Y here if you have an EasyTouch USB Touch controller.
1108	  If unsure, say N.
1109
1110config TOUCHSCREEN_TOUCHIT213
1111	tristate "Sahara TouchIT-213 touchscreen"
1112	select SERIO
1113	help
1114	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1115
1116	  If unsure, say N.
1117
1118	  To compile this driver as a module, choose M here: the
1119	  module will be called touchit213.
1120
1121config TOUCHSCREEN_TS4800
1122	tristate "TS-4800 touchscreen"
1123	depends on HAS_IOMEM && OF
1124	depends on SOC_IMX51 || COMPILE_TEST
1125	select MFD_SYSCON
1126	help
1127	  Say Y here if you have a touchscreen on a TS-4800 board.
1128
1129	  On TS-4800, the touchscreen is not handled directly by Linux but by
1130	  a companion FPGA.
1131
1132	  If unsure, say N.
1133
1134	  To compile this driver as a module, choose M here: the
1135	  module will be called ts4800_ts.
1136
1137config TOUCHSCREEN_TSC_SERIO
1138	tristate "TSC-10/25/40 serial touchscreen support"
1139	select SERIO
1140	help
1141	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1142	  to your system.
1143
1144	  If unsure, say N.
1145
1146	  To compile this driver as a module, choose M here: the
1147	  module will be called tsc40.
1148
1149config TOUCHSCREEN_TSC200X_CORE
1150	tristate
1151
1152config TOUCHSCREEN_TSC2004
1153	tristate "TSC2004 based touchscreens"
1154	depends on I2C
1155	select REGMAP_I2C
1156	select TOUCHSCREEN_TSC200X_CORE
1157	help
1158	  Say Y here if you have a TSC2004 based touchscreen.
1159
1160	  If unsure, say N.
1161
1162	  To compile this driver as a module, choose M here: the
1163	  module will be called tsc2004.
1164
1165config TOUCHSCREEN_TSC2005
1166	tristate "TSC2005 based touchscreens"
1167	depends on SPI_MASTER
1168	select REGMAP_SPI
1169	select TOUCHSCREEN_TSC200X_CORE
1170	help
1171	  Say Y here if you have a TSC2005 based touchscreen.
1172
1173	  If unsure, say N.
1174
1175	  To compile this driver as a module, choose M here: the
1176	  module will be called tsc2005.
1177
1178config TOUCHSCREEN_TSC2007
1179	tristate "TSC2007 based touchscreens"
1180	depends on I2C
1181	help
1182	  Say Y here if you have a TSC2007 based touchscreen.
1183
1184	  If unsure, say N.
1185
1186	  To compile this driver as a module, choose M here: the
1187	  module will be called tsc2007.
1188
1189config TOUCHSCREEN_TSC2007_IIO
1190	bool "IIO interface for external ADC input and temperature"
1191	depends on TOUCHSCREEN_TSC2007
1192	depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
1193	help
1194	  Saying Y here adds an iio interface to the tsc2007 which
1195	  provides values for the AUX input (used for e.g. battery
1196	  or ambient light monitoring), temperature and raw input
1197	  values.
1198
1199config TOUCHSCREEN_PCAP
1200	tristate "Motorola PCAP touchscreen"
1201	depends on EZX_PCAP
1202	help
1203	  Say Y here if you have a Motorola EZX telephone and
1204	  want to enable support for the built-in touchscreen.
1205
1206	  To compile this driver as a module, choose M here: the
1207	  module will be called pcap_ts.
1208
1209config TOUCHSCREEN_RM_TS
1210	tristate "Raydium I2C Touchscreen"
1211	depends on I2C
1212	depends on GPIOLIB || COMPILE_TEST
1213	help
1214	  Say Y here if you have Raydium series I2C touchscreen,
1215	  such as RM32380, connected to your system.
1216
1217	  If unsure, say N.
1218
1219	  To compile this driver as a module, choose M here: the
1220	  module will be called raydium_i2c_ts.
1221
1222config TOUCHSCREEN_SILEAD
1223	tristate "Silead I2C touchscreen"
1224	depends on I2C
1225	help
1226	  Say Y here if you have the Silead touchscreen connected to
1227	  your system.
1228
1229	  If unsure, say N.
1230
1231	  To compile this driver as a module, choose M here: the
1232	  module will be called silead.
1233
1234config TOUCHSCREEN_SIS_I2C
1235	tristate "SiS 9200 family I2C touchscreen"
1236	depends on I2C
1237	select CRC_ITU_T
1238	depends on GPIOLIB || COMPILE_TEST
1239	help
1240	  This enables support for SiS 9200 family over I2C based touchscreens.
1241
1242	  If unsure, say N.
1243
1244	  To compile this driver as a module, choose M here: the
1245	  module will be called sis_i2c.
1246
1247config TOUCHSCREEN_ST1232
1248	tristate "Sitronix ST1232 or ST1633 touchscreen controllers"
1249	depends on I2C
1250	help
1251	  Say Y here if you want to support the Sitronix ST1232
1252	  or ST1633 touchscreen controller.
1253
1254	  If unsure, say N.
1255
1256	  To compile this driver as a module, choose M here: the
1257	  module will be called st1232_ts.
1258
1259config TOUCHSCREEN_STMFTS
1260	tristate "STMicroelectronics STMFTS touchscreen"
1261	depends on I2C
1262	depends on LEDS_CLASS
1263	help
1264	  Say Y here if you want support for STMicroelectronics
1265	  STMFTS touchscreen.
1266
1267	  To compile this driver as a module, choose M here: the
1268	  module will be called stmfts.
1269
1270config TOUCHSCREEN_STMPE
1271	tristate "STMicroelectronics STMPE touchscreens"
1272	depends on MFD_STMPE
1273	depends on OF
1274	help
1275	  Say Y here if you want support for STMicroelectronics
1276	  STMPE touchscreen controllers.
1277
1278	  To compile this driver as a module, choose M here: the
1279	  module will be called stmpe-ts.
1280
1281config TOUCHSCREEN_SUN4I
1282	tristate "Allwinner sun4i resistive touchscreen controller support"
1283	depends on ARCH_SUNXI || COMPILE_TEST
1284	depends on HWMON
1285	depends on THERMAL || !THERMAL_OF
1286	help
1287	  This selects support for the resistive touchscreen controller
1288	  found on Allwinner sunxi SoCs.
1289
1290	  To compile this driver as a module, choose M here: the
1291	  module will be called sun4i-ts.
1292
1293config TOUCHSCREEN_SUR40
1294	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
1295	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
1296	depends on VIDEO_DEV
1297	select VIDEOBUF2_DMA_SG
1298	help
1299	  Say Y here if you want support for the Samsung SUR40 touchscreen
1300	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
1301
1302	  To compile this driver as a module, choose M here: the
1303	  module will be called sur40.
1304
1305config TOUCHSCREEN_SURFACE3_SPI
1306	tristate "Ntrig/Microsoft Surface 3 SPI touchscreen"
1307	depends on SPI
1308	depends on GPIOLIB || COMPILE_TEST
1309	help
1310	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1311	  controller chip as found on the Surface 3 in your system.
1312
1313	  If unsure, say N.
1314
1315	  To compile this driver as a module, choose M here: the
1316	  module will be called surface3_spi.
1317
1318config TOUCHSCREEN_SX8654
1319	tristate "Semtech SX8654 touchscreen"
1320	depends on I2C
1321	help
1322	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1323
1324	  If unsure, say N
1325
1326	  To compile this driver as a module, choose M here: the
1327	  module will be called sx8654.
1328
1329config TOUCHSCREEN_TPS6507X
1330	tristate "TPS6507x based touchscreens"
1331	depends on I2C
1332	help
1333	  Say Y here if you have a TPS6507x based touchscreen
1334	  controller.
1335
1336	  If unsure, say N.
1337
1338	  To compile this driver as a module, choose M here: the
1339	  module will be called tps6507x_ts.
1340
1341config TOUCHSCREEN_ZET6223
1342	tristate "Zeitec ZET6223 touchscreen driver"
1343	depends on I2C
1344	help
1345	  Say Y here if you have a touchscreen using Zeitec ZET6223
1346
1347	  If unsure, say N.
1348
1349	  To compile this driver as a module, choose M here: the
1350	  module will be called zet6223.
1351
1352config TOUCHSCREEN_ZFORCE
1353	tristate "Neonode zForce infrared touchscreens"
1354	depends on I2C
1355	depends on GPIOLIB || COMPILE_TEST
1356	help
1357	  Say Y here if you have a touchscreen using the zforce
1358	  infraread technology from Neonode.
1359
1360	  If unsure, say N.
1361
1362	  To compile this driver as a module, choose M here: the
1363	  module will be called zforce_ts.
1364
1365config TOUCHSCREEN_COLIBRI_VF50
1366	tristate "Toradex Colibri on board touchscreen driver"
1367	depends on IIO
1368	depends on GPIOLIB || COMPILE_TEST
1369	help
1370	  Say Y here if you have a Colibri VF50 and plan to use
1371	  the on-board provided 4-wire touchscreen driver.
1372
1373	  If unsure, say N.
1374
1375	  To compile this driver as a module, choose M here: the
1376	  module will be called colibri_vf50_ts.
1377
1378config TOUCHSCREEN_ROHM_BU21023
1379	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
1380	depends on I2C
1381	help
1382	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1383
1384	  If unsure, say N.
1385
1386	  To compile this driver as a module, choose M here: the
1387	  module will be called bu21023_ts.
1388
1389config TOUCHSCREEN_IQS5XX
1390	tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
1391	depends on I2C
1392	help
1393	  Say Y to enable support for the Azoteq IQS550/572/525
1394	  family of trackpad/touchscreen controllers.
1395
1396	  To compile this driver as a module, choose M here: the
1397	  module will be called iqs5xx.
1398
1399config TOUCHSCREEN_IQS7211
1400	tristate "Azoteq IQS7210A/7211A/E trackpad/touchscreen controller"
1401	depends on I2C
1402	help
1403	  Say Y to enable support for the Azoteq IQS7210A/7211A/E
1404	  family of trackpad/touchscreen controllers.
1405
1406	  To compile this driver as a module, choose M here: the
1407	  module will be called iqs7211.
1408
1409config TOUCHSCREEN_ZINITIX
1410	tristate "Zinitix touchscreen support"
1411	depends on I2C
1412	help
1413	  Say Y here if you have a touchscreen using Zinitix bt541,
1414	  or something similar enough.
1415
1416	  If unsure, say N.
1417
1418	  To compile this driver as a module, choose M here: the
1419	  module will be called zinitix.
1420
1421config TOUCHSCREEN_HIMAX_HX83112B
1422	tristate "Himax hx83112b touchscreen driver"
1423	depends on I2C
1424	select REGMAP_I2C
1425	help
1426	  Say Y here to enable support for Himax hx83112b touchscreens.
1427
1428	  If unsure, say N.
1429
1430	  To compile this driver as a module, choose M here: the
1431	  module will be called himax_hx83112b.
1432
1433endif