1/*
  2 * Copyright 2015 Gábor Nyers
  3 *
  4 * Gábor Nyers <gabor.nyers@gmail.com>
  5 *
  6 * This file is dual-licensed: you can use it either under the terms
  7 * of the GPL or the X11 license, at your option. Note that this dual
  8 * licensing only applies to this file, and not this project as a
  9 * whole.
 10 *
 11 *  a) This file is free software; you can redistribute it and/or
 12 *     modify it under the terms of the GNU General Public License as
 13 *     published by the Free Software Foundation; either version 2 of the
 14 *     License, or (at your option) any later version.
 15 *
 16 *     This file is distributed in the hope that it will be useful,
 17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 19 *     GNU General Public License for more details.
 20 *
 21 * Or, alternatively,
 22 *
 23 *  b) Permission is hereby granted, free of charge, to any person
 24 *     obtaining a copy of this software and associated documentation
 25 *     files (the "Software"), to deal in the Software without
 26 *     restriction, including without limitation the rights to use,
 27 *     copy, modify, merge, publish, distribute, sublicense, and/or
 28 *     sell copies of the Software, and to permit persons to whom the
 29 *     Software is furnished to do so, subject to the following
 30 *     conditions:
 31 *
 32 *     The above copyright notice and this permission notice shall be
 33 *     included in all copies or substantial portions of the Software.
 34 *
 35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 42 *     OTHER DEALINGS IN THE SOFTWARE.
 43 */
 44
 45/dts-v1/;
 46#include "sun4i-a10.dtsi"
 47#include "sunxi-common-regulators.dtsi"
 48
 49#include <dt-bindings/gpio/gpio.h>
 50
 51/ {
 52	model = "Jesurun Q5";
 53	compatible = "jesurun,q5", "allwinner,sun4i-a10";
 54
 55	aliases {
 56		serial0 = &uart0;
 57	};
 58
 59	chosen {
 60		stdout-path = "serial0:115200n8";
 61	};
 62
 63	leds {
 64		compatible = "gpio-leds";
 65
 66		led {
 67			label = "q5:green:usr";
 68			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
 69		};
 70
 71	};
 72
 73	reg_emac_3v3: emac-3v3 {
 74		compatible = "regulator-fixed";
 75		regulator-name = "emac-3v3";
 76		regulator-min-microvolt = <3300000>;
 77		regulator-max-microvolt = <3300000>;
 78		startup-delay-us = <20000>;
 79		enable-active-high;
 80		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
 81	};
 82};
 83
 84&ahci {
 85	status = "okay";
 86};
 87
 88&ehci0 {
 89	status = "okay";
 90};
 91
 92&ehci1 {
 93	status = "okay";
 94};
 95
 96&emac {
 97	phy-handle = <&phy1>;
 98	status = "okay";
 99};
100
101&emac_sram {
102	status = "okay";
103};
104
105&i2c0 {
106	status = "okay";
107
108	axp209: pmic@34 {
109		compatible = "x-powers,axp209";
110		reg = <0x34>;
111		interrupts = <0>;
112
113		interrupt-controller;
114		#interrupt-cells = <1>;
115	};
116};
117
118&ir0 {
119	pinctrl-names = "default";
120	pinctrl-0 = <&ir0_rx_pins>;
121	status = "okay";
122};
123
124&mdio {
125	phy-supply = <&reg_emac_3v3>;
126	status = "okay";
127
128	phy1: ethernet-phy@1 {
129		reg = <1>;
130	};
131};
132
133&mmc0 {
134	vmmc-supply = <&reg_vcc3v3>;
135	bus-width = <4>;
136	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
137	status = "okay";
138};
139
140&ohci0 {
141	status = "okay";
142};
143
144&ohci1 {
145	status = "okay";
146};
147
148&otg_sram {
149	status = "okay";
150};
151
152&reg_usb0_vbus {
153	regulator-boot-on;
154	status = "okay";
155};
156
157&reg_usb1_vbus {
158	status = "okay";
159};
160
161&reg_usb2_vbus {
162	status = "okay";
163};
164
165&uart0 {
166	pinctrl-names = "default";
167	pinctrl-0 = <&uart0_pb_pins>;
168	status = "okay";
169};
170
171&usb_otg {
172	dr_mode = "host";
173	status = "okay";
174};
175
176&usbphy {
177	usb0_vbus-supply = <&reg_usb0_vbus>;
178	usb1_vbus-supply = <&reg_usb1_vbus>;
179	usb2_vbus-supply = <&reg_usb2_vbus>;
180	status = "okay";
181};