1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2/*
  3 * Copyright 2018 Luxul Inc.
  4 */
  5
  6/dts-v1/;
  7
  8#include "bcm47094.dtsi"
  9#include "bcm5301x-nand-cs0-bch8.dtsi"
 10
 11/ {
 12	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
 13	model = "Luxul XWR-3150 V1";
 14
 15	chosen {
 16		bootargs = "earlycon";
 17	};
 18
 19	memory@0 {
 20		device_type = "memory";
 21		reg = <0x00000000 0x08000000>,
 22		      <0x88000000 0x18000000>;
 23	};
 24
 25	nvram@1eff0000 {
 26		compatible = "brcm,nvram";
 27		reg = <0x1eff0000 0x10000>;
 28
 29		et0macaddr: et0macaddr {
 30			#nvmem-cell-cells = <1>;
 31		};
 32	};
 33
 34	leds {
 35		compatible = "gpio-leds";
 36
 37		led-power {
 38			label = "bcm53xx:green:power";
 39			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 40			linux,default-trigger = "default-on";
 41		};
 42
 43		led-usb3 {
 44			label = "bcm53xx:green:usb3";
 45			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 46			trigger-sources = <&ohci_port1>, <&ehci_port1>,
 47					  <&xhci_port1>;
 48			linux,default-trigger = "usbport";
 49		};
 50
 51		led-status {
 52			label = "bcm53xx:green:status";
 53			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 54			linux,default-trigger = "timer";
 55		};
 56
 57		led-2ghz {
 58			label = "bcm53xx:green:2ghz";
 59			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 60		};
 61
 62		led-5ghz {
 63			label = "bcm53xx:green:5ghz";
 64			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 65		};
 66	};
 67
 68	gpio-keys {
 69		compatible = "gpio-keys";
 70
 71		button-restart {
 72			label = "Reset";
 73			linux,code = <KEY_RESTART>;
 74			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 75		};
 76	};
 77};
 78
 79&gmac0 {
 80	nvmem-cells = <&et0macaddr 0>;
 81	nvmem-cell-names = "mac-address";
 82};
 83
 84&pcie0 {
 85	#address-cells = <3>;
 86	#size-cells = <2>;
 87
 88	bridge@0,0 {
 89		reg = <0x0000 0 0 0 0>;
 90
 91		#address-cells = <3>;
 92		#size-cells = <2>;
 93
 94		wifi@0,0 {
 95			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
 96			reg = <0x0000 0 0 0 0>;
 97			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
 98		};
 99	};
100};
101
102&pcie1 {
103	#address-cells = <3>;
104	#size-cells = <2>;
105
106	bridge@0,0 {
107		reg = <0x0000 0 0 0 0>;
108
109		#address-cells = <3>;
110		#size-cells = <2>;
111
112		wifi@0,0 {
113			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
114			reg = <0x0000 0 0 0 0>;
115			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
116		};
117	};
118};
119
120&usb3 {
121	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
122};
123
124&usb3_phy {
125	status = "okay";
126};
127
128&spi_nor {
129	status = "okay";
130};
131
132&srab {
133	status = "okay";
134
135	ports {
136		port@0 {
137			label = "lan4";
138		};
139
140		port@1 {
141			label = "lan3";
142		};
143
144		port@2 {
145			label = "lan2";
146		};
147
148		port@3 {
149			label = "lan1";
150		};
151
152		port@4 {
153			label = "wan";
154			nvmem-cells = <&et0macaddr 5>;
155			nvmem-cell-names = "mac-address";
156		};
157
158		port@5 {
159			label = "cpu";
160		};
161
162		port@7 {
163			status = "disabled";
164		};
165
166		port@8 {
167			status = "disabled";
168		};
169	};
170};