Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver for msm7k serial device and console
4 *
5 * Copyright (C) 2007 Google, Inc.
6 * Author: Robert Love <rlove@google.com>
7 * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
8 */
9
10#include <linux/kernel.h>
11#include <linux/atomic.h>
12#include <linux/dma/qcom_adm.h>
13#include <linux/dma-mapping.h>
14#include <linux/dmaengine.h>
15#include <linux/module.h>
16#include <linux/io.h>
17#include <linux/ioport.h>
18#include <linux/interrupt.h>
19#include <linux/init.h>
20#include <linux/console.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23#include <linux/serial_core.h>
24#include <linux/slab.h>
25#include <linux/clk.h>
26#include <linux/platform_device.h>
27#include <linux/delay.h>
28#include <linux/of.h>
29#include <linux/of_device.h>
30#include <linux/wait.h>
31
32#define MSM_UART_MR1 0x0000
33
34#define MSM_UART_MR1_AUTO_RFR_LEVEL0 0x3F
35#define MSM_UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
36#define MSM_UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
37#define MSM_UART_MR1_RX_RDY_CTL BIT(7)
38#define MSM_UART_MR1_CTS_CTL BIT(6)
39
40#define MSM_UART_MR2 0x0004
41#define MSM_UART_MR2_ERROR_MODE BIT(6)
42#define MSM_UART_MR2_BITS_PER_CHAR 0x30
43#define MSM_UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
44#define MSM_UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
45#define MSM_UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
46#define MSM_UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
47#define MSM_UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
48#define MSM_UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
49#define MSM_UART_MR2_PARITY_MODE_NONE 0x0
50#define MSM_UART_MR2_PARITY_MODE_ODD 0x1
51#define MSM_UART_MR2_PARITY_MODE_EVEN 0x2
52#define MSM_UART_MR2_PARITY_MODE_SPACE 0x3
53#define MSM_UART_MR2_PARITY_MODE 0x3
54
55#define MSM_UART_CSR 0x0008
56
57#define MSM_UART_TF 0x000C
58#define UARTDM_TF 0x0070
59
60#define MSM_UART_CR 0x0010
61#define MSM_UART_CR_CMD_NULL (0 << 4)
62#define MSM_UART_CR_CMD_RESET_RX (1 << 4)
63#define MSM_UART_CR_CMD_RESET_TX (2 << 4)
64#define MSM_UART_CR_CMD_RESET_ERR (3 << 4)
65#define MSM_UART_CR_CMD_RESET_BREAK_INT (4 << 4)
66#define MSM_UART_CR_CMD_START_BREAK (5 << 4)
67#define MSM_UART_CR_CMD_STOP_BREAK (6 << 4)
68#define MSM_UART_CR_CMD_RESET_CTS (7 << 4)
69#define MSM_UART_CR_CMD_RESET_STALE_INT (8 << 4)
70#define MSM_UART_CR_CMD_PACKET_MODE (9 << 4)
71#define MSM_UART_CR_CMD_MODE_RESET (12 << 4)
72#define MSM_UART_CR_CMD_SET_RFR (13 << 4)
73#define MSM_UART_CR_CMD_RESET_RFR (14 << 4)
74#define MSM_UART_CR_CMD_PROTECTION_EN (16 << 4)
75#define MSM_UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
76#define MSM_UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
77#define MSM_UART_CR_CMD_FORCE_STALE (4 << 8)
78#define MSM_UART_CR_CMD_RESET_TX_READY (3 << 8)
79#define MSM_UART_CR_TX_DISABLE BIT(3)
80#define MSM_UART_CR_TX_ENABLE BIT(2)
81#define MSM_UART_CR_RX_DISABLE BIT(1)
82#define MSM_UART_CR_RX_ENABLE BIT(0)
83#define MSM_UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
84
85#define MSM_UART_IMR 0x0014
86#define MSM_UART_IMR_TXLEV BIT(0)
87#define MSM_UART_IMR_RXSTALE BIT(3)
88#define MSM_UART_IMR_RXLEV BIT(4)
89#define MSM_UART_IMR_DELTA_CTS BIT(5)
90#define MSM_UART_IMR_CURRENT_CTS BIT(6)
91#define MSM_UART_IMR_RXBREAK_START BIT(10)
92
93#define MSM_UART_IPR_RXSTALE_LAST 0x20
94#define MSM_UART_IPR_STALE_LSB 0x1F
95#define MSM_UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
96#define MSM_UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
97
98#define MSM_UART_IPR 0x0018
99#define MSM_UART_TFWR 0x001C
100#define MSM_UART_RFWR 0x0020
101#define MSM_UART_HCR 0x0024
102
103#define MSM_UART_MREG 0x0028
104#define MSM_UART_NREG 0x002C
105#define MSM_UART_DREG 0x0030
106#define MSM_UART_MNDREG 0x0034
107#define MSM_UART_IRDA 0x0038
108#define MSM_UART_MISR_MODE 0x0040
109#define MSM_UART_MISR_RESET 0x0044
110#define MSM_UART_MISR_EXPORT 0x0048
111#define MSM_UART_MISR_VAL 0x004C
112#define MSM_UART_TEST_CTRL 0x0050
113
114#define MSM_UART_SR 0x0008
115#define MSM_UART_SR_HUNT_CHAR BIT(7)
116#define MSM_UART_SR_RX_BREAK BIT(6)
117#define MSM_UART_SR_PAR_FRAME_ERR BIT(5)
118#define MSM_UART_SR_OVERRUN BIT(4)
119#define MSM_UART_SR_TX_EMPTY BIT(3)
120#define MSM_UART_SR_TX_READY BIT(2)
121#define MSM_UART_SR_RX_FULL BIT(1)
122#define MSM_UART_SR_RX_READY BIT(0)
123
124#define MSM_UART_RF 0x000C
125#define UARTDM_RF 0x0070
126#define MSM_UART_MISR 0x0010
127#define MSM_UART_ISR 0x0014
128#define MSM_UART_ISR_TX_READY BIT(7)
129
130#define UARTDM_RXFS 0x50
131#define UARTDM_RXFS_BUF_SHIFT 0x7
132#define UARTDM_RXFS_BUF_MASK 0x7
133
134#define UARTDM_DMEN 0x3C
135#define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
136#define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
137
138#define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */
139#define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */
140
141#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */
142#define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */
143
144#define UARTDM_DMRX 0x34
145#define UARTDM_NCF_TX 0x40
146#define UARTDM_RX_TOTAL_SNAP 0x38
147
148#define UARTDM_BURST_SIZE 16 /* in bytes */
149#define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */
150#define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */
151#define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4)
152
153enum {
154 UARTDM_1P1 = 1,
155 UARTDM_1P2,
156 UARTDM_1P3,
157 UARTDM_1P4,
158};
159
160struct msm_dma {
161 struct dma_chan *chan;
162 enum dma_data_direction dir;
163 dma_addr_t phys;
164 unsigned char *virt;
165 dma_cookie_t cookie;
166 u32 enable_bit;
167 unsigned int count;
168 struct dma_async_tx_descriptor *desc;
169};
170
171struct msm_port {
172 struct uart_port uart;
173 char name[16];
174 struct clk *clk;
175 struct clk *pclk;
176 unsigned int imr;
177 int is_uartdm;
178 unsigned int old_snap_state;
179 bool break_detected;
180 struct msm_dma tx_dma;
181 struct msm_dma rx_dma;
182};
183
184static inline struct msm_port *to_msm_port(struct uart_port *up)
185{
186 return container_of(up, struct msm_port, uart);
187}
188
189static
190void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
191{
192 writel_relaxed(val, port->membase + off);
193}
194
195static
196unsigned int msm_read(struct uart_port *port, unsigned int off)
197{
198 return readl_relaxed(port->membase + off);
199}
200
201/*
202 * Setup the MND registers to use the TCXO clock.
203 */
204static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
205{
206 msm_write(port, 0x06, MSM_UART_MREG);
207 msm_write(port, 0xF1, MSM_UART_NREG);
208 msm_write(port, 0x0F, MSM_UART_DREG);
209 msm_write(port, 0x1A, MSM_UART_MNDREG);
210 port->uartclk = 1843200;
211}
212
213/*
214 * Setup the MND registers to use the TCXO clock divided by 4.
215 */
216static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
217{
218 msm_write(port, 0x18, MSM_UART_MREG);
219 msm_write(port, 0xF6, MSM_UART_NREG);
220 msm_write(port, 0x0F, MSM_UART_DREG);
221 msm_write(port, 0x0A, MSM_UART_MNDREG);
222 port->uartclk = 1843200;
223}
224
225static void msm_serial_set_mnd_regs(struct uart_port *port)
226{
227 struct msm_port *msm_port = to_msm_port(port);
228
229 /*
230 * These registers don't exist so we change the clk input rate
231 * on uartdm hardware instead
232 */
233 if (msm_port->is_uartdm)
234 return;
235
236 if (port->uartclk == 19200000)
237 msm_serial_set_mnd_regs_tcxo(port);
238 else if (port->uartclk == 4800000)
239 msm_serial_set_mnd_regs_tcxoby4(port);
240}
241
242static void msm_handle_tx(struct uart_port *port);
243static void msm_start_rx_dma(struct msm_port *msm_port);
244
245static void msm_stop_dma(struct uart_port *port, struct msm_dma *dma)
246{
247 struct device *dev = port->dev;
248 unsigned int mapped;
249 u32 val;
250
251 mapped = dma->count;
252 dma->count = 0;
253
254 dmaengine_terminate_all(dma->chan);
255
256 /*
257 * DMA Stall happens if enqueue and flush command happens concurrently.
258 * For example before changing the baud rate/protocol configuration and
259 * sending flush command to ADM, disable the channel of UARTDM.
260 * Note: should not reset the receiver here immediately as it is not
261 * suggested to do disable/reset or reset/disable at the same time.
262 */
263 val = msm_read(port, UARTDM_DMEN);
264 val &= ~dma->enable_bit;
265 msm_write(port, val, UARTDM_DMEN);
266
267 if (mapped)
268 dma_unmap_single(dev, dma->phys, mapped, dma->dir);
269}
270
271static void msm_release_dma(struct msm_port *msm_port)
272{
273 struct msm_dma *dma;
274
275 dma = &msm_port->tx_dma;
276 if (dma->chan) {
277 msm_stop_dma(&msm_port->uart, dma);
278 dma_release_channel(dma->chan);
279 }
280
281 memset(dma, 0, sizeof(*dma));
282
283 dma = &msm_port->rx_dma;
284 if (dma->chan) {
285 msm_stop_dma(&msm_port->uart, dma);
286 dma_release_channel(dma->chan);
287 kfree(dma->virt);
288 }
289
290 memset(dma, 0, sizeof(*dma));
291}
292
293static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
294{
295 struct device *dev = msm_port->uart.dev;
296 struct dma_slave_config conf;
297 struct qcom_adm_peripheral_config periph_conf = {};
298 struct msm_dma *dma;
299 u32 crci = 0;
300 int ret;
301
302 dma = &msm_port->tx_dma;
303
304 /* allocate DMA resources, if available */
305 dma->chan = dma_request_chan(dev, "tx");
306 if (IS_ERR(dma->chan))
307 goto no_tx;
308
309 of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci);
310
311 memset(&conf, 0, sizeof(conf));
312 conf.direction = DMA_MEM_TO_DEV;
313 conf.device_fc = true;
314 conf.dst_addr = base + UARTDM_TF;
315 conf.dst_maxburst = UARTDM_BURST_SIZE;
316 if (crci) {
317 conf.peripheral_config = &periph_conf;
318 conf.peripheral_size = sizeof(periph_conf);
319 periph_conf.crci = crci;
320 }
321
322 ret = dmaengine_slave_config(dma->chan, &conf);
323 if (ret)
324 goto rel_tx;
325
326 dma->dir = DMA_TO_DEVICE;
327
328 if (msm_port->is_uartdm < UARTDM_1P4)
329 dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE;
330 else
331 dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE;
332
333 return;
334
335rel_tx:
336 dma_release_channel(dma->chan);
337no_tx:
338 memset(dma, 0, sizeof(*dma));
339}
340
341static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
342{
343 struct device *dev = msm_port->uart.dev;
344 struct dma_slave_config conf;
345 struct qcom_adm_peripheral_config periph_conf = {};
346 struct msm_dma *dma;
347 u32 crci = 0;
348 int ret;
349
350 dma = &msm_port->rx_dma;
351
352 /* allocate DMA resources, if available */
353 dma->chan = dma_request_chan(dev, "rx");
354 if (IS_ERR(dma->chan))
355 goto no_rx;
356
357 of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci);
358
359 dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL);
360 if (!dma->virt)
361 goto rel_rx;
362
363 memset(&conf, 0, sizeof(conf));
364 conf.direction = DMA_DEV_TO_MEM;
365 conf.device_fc = true;
366 conf.src_addr = base + UARTDM_RF;
367 conf.src_maxburst = UARTDM_BURST_SIZE;
368 if (crci) {
369 conf.peripheral_config = &periph_conf;
370 conf.peripheral_size = sizeof(periph_conf);
371 periph_conf.crci = crci;
372 }
373
374 ret = dmaengine_slave_config(dma->chan, &conf);
375 if (ret)
376 goto err;
377
378 dma->dir = DMA_FROM_DEVICE;
379
380 if (msm_port->is_uartdm < UARTDM_1P4)
381 dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE;
382 else
383 dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE;
384
385 return;
386err:
387 kfree(dma->virt);
388rel_rx:
389 dma_release_channel(dma->chan);
390no_rx:
391 memset(dma, 0, sizeof(*dma));
392}
393
394static inline void msm_wait_for_xmitr(struct uart_port *port)
395{
396 unsigned int timeout = 500000;
397
398 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY)) {
399 if (msm_read(port, MSM_UART_ISR) & MSM_UART_ISR_TX_READY)
400 break;
401 udelay(1);
402 if (!timeout--)
403 break;
404 }
405 msm_write(port, MSM_UART_CR_CMD_RESET_TX_READY, MSM_UART_CR);
406}
407
408static void msm_stop_tx(struct uart_port *port)
409{
410 struct msm_port *msm_port = to_msm_port(port);
411
412 msm_port->imr &= ~MSM_UART_IMR_TXLEV;
413 msm_write(port, msm_port->imr, MSM_UART_IMR);
414}
415
416static void msm_start_tx(struct uart_port *port)
417{
418 struct msm_port *msm_port = to_msm_port(port);
419 struct msm_dma *dma = &msm_port->tx_dma;
420
421 /* Already started in DMA mode */
422 if (dma->count)
423 return;
424
425 msm_port->imr |= MSM_UART_IMR_TXLEV;
426 msm_write(port, msm_port->imr, MSM_UART_IMR);
427}
428
429static void msm_reset_dm_count(struct uart_port *port, int count)
430{
431 msm_wait_for_xmitr(port);
432 msm_write(port, count, UARTDM_NCF_TX);
433 msm_read(port, UARTDM_NCF_TX);
434}
435
436static void msm_complete_tx_dma(void *args)
437{
438 struct msm_port *msm_port = args;
439 struct uart_port *port = &msm_port->uart;
440 struct circ_buf *xmit = &port->state->xmit;
441 struct msm_dma *dma = &msm_port->tx_dma;
442 struct dma_tx_state state;
443 unsigned long flags;
444 unsigned int count;
445 u32 val;
446
447 spin_lock_irqsave(&port->lock, flags);
448
449 /* Already stopped */
450 if (!dma->count)
451 goto done;
452
453 dmaengine_tx_status(dma->chan, dma->cookie, &state);
454
455 dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir);
456
457 val = msm_read(port, UARTDM_DMEN);
458 val &= ~dma->enable_bit;
459 msm_write(port, val, UARTDM_DMEN);
460
461 if (msm_port->is_uartdm > UARTDM_1P3) {
462 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
463 msm_write(port, MSM_UART_CR_TX_ENABLE, MSM_UART_CR);
464 }
465
466 count = dma->count - state.residue;
467 uart_xmit_advance(port, count);
468 dma->count = 0;
469
470 /* Restore "Tx FIFO below watermark" interrupt */
471 msm_port->imr |= MSM_UART_IMR_TXLEV;
472 msm_write(port, msm_port->imr, MSM_UART_IMR);
473
474 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
475 uart_write_wakeup(port);
476
477 msm_handle_tx(port);
478done:
479 spin_unlock_irqrestore(&port->lock, flags);
480}
481
482static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
483{
484 struct circ_buf *xmit = &msm_port->uart.state->xmit;
485 struct uart_port *port = &msm_port->uart;
486 struct msm_dma *dma = &msm_port->tx_dma;
487 void *cpu_addr;
488 int ret;
489 u32 val;
490
491 cpu_addr = &xmit->buf[xmit->tail];
492
493 dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir);
494 ret = dma_mapping_error(port->dev, dma->phys);
495 if (ret)
496 return ret;
497
498 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
499 count, DMA_MEM_TO_DEV,
500 DMA_PREP_INTERRUPT |
501 DMA_PREP_FENCE);
502 if (!dma->desc) {
503 ret = -EIO;
504 goto unmap;
505 }
506
507 dma->desc->callback = msm_complete_tx_dma;
508 dma->desc->callback_param = msm_port;
509
510 dma->cookie = dmaengine_submit(dma->desc);
511 ret = dma_submit_error(dma->cookie);
512 if (ret)
513 goto unmap;
514
515 /*
516 * Using DMA complete for Tx FIFO reload, no need for
517 * "Tx FIFO below watermark" one, disable it
518 */
519 msm_port->imr &= ~MSM_UART_IMR_TXLEV;
520 msm_write(port, msm_port->imr, MSM_UART_IMR);
521
522 dma->count = count;
523
524 val = msm_read(port, UARTDM_DMEN);
525 val |= dma->enable_bit;
526
527 if (msm_port->is_uartdm < UARTDM_1P4)
528 msm_write(port, val, UARTDM_DMEN);
529
530 msm_reset_dm_count(port, count);
531
532 if (msm_port->is_uartdm > UARTDM_1P3)
533 msm_write(port, val, UARTDM_DMEN);
534
535 dma_async_issue_pending(dma->chan);
536 return 0;
537unmap:
538 dma_unmap_single(port->dev, dma->phys, count, dma->dir);
539 return ret;
540}
541
542static void msm_complete_rx_dma(void *args)
543{
544 struct msm_port *msm_port = args;
545 struct uart_port *port = &msm_port->uart;
546 struct tty_port *tport = &port->state->port;
547 struct msm_dma *dma = &msm_port->rx_dma;
548 int count = 0, i, sysrq;
549 unsigned long flags;
550 u32 val;
551
552 spin_lock_irqsave(&port->lock, flags);
553
554 /* Already stopped */
555 if (!dma->count)
556 goto done;
557
558 val = msm_read(port, UARTDM_DMEN);
559 val &= ~dma->enable_bit;
560 msm_write(port, val, UARTDM_DMEN);
561
562 if (msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN) {
563 port->icount.overrun++;
564 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
565 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
566 }
567
568 count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
569
570 port->icount.rx += count;
571
572 dma->count = 0;
573
574 dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
575
576 for (i = 0; i < count; i++) {
577 char flag = TTY_NORMAL;
578
579 if (msm_port->break_detected && dma->virt[i] == 0) {
580 port->icount.brk++;
581 flag = TTY_BREAK;
582 msm_port->break_detected = false;
583 if (uart_handle_break(port))
584 continue;
585 }
586
587 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
588 flag = TTY_NORMAL;
589
590 spin_unlock_irqrestore(&port->lock, flags);
591 sysrq = uart_handle_sysrq_char(port, dma->virt[i]);
592 spin_lock_irqsave(&port->lock, flags);
593 if (!sysrq)
594 tty_insert_flip_char(tport, dma->virt[i], flag);
595 }
596
597 msm_start_rx_dma(msm_port);
598done:
599 spin_unlock_irqrestore(&port->lock, flags);
600
601 if (count)
602 tty_flip_buffer_push(tport);
603}
604
605static void msm_start_rx_dma(struct msm_port *msm_port)
606{
607 struct msm_dma *dma = &msm_port->rx_dma;
608 struct uart_port *uart = &msm_port->uart;
609 u32 val;
610 int ret;
611
612 if (IS_ENABLED(CONFIG_CONSOLE_POLL))
613 return;
614
615 if (!dma->chan)
616 return;
617
618 dma->phys = dma_map_single(uart->dev, dma->virt,
619 UARTDM_RX_SIZE, dma->dir);
620 ret = dma_mapping_error(uart->dev, dma->phys);
621 if (ret)
622 goto sw_mode;
623
624 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
625 UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
626 DMA_PREP_INTERRUPT);
627 if (!dma->desc)
628 goto unmap;
629
630 dma->desc->callback = msm_complete_rx_dma;
631 dma->desc->callback_param = msm_port;
632
633 dma->cookie = dmaengine_submit(dma->desc);
634 ret = dma_submit_error(dma->cookie);
635 if (ret)
636 goto unmap;
637 /*
638 * Using DMA for FIFO off-load, no need for "Rx FIFO over
639 * watermark" or "stale" interrupts, disable them
640 */
641 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
642
643 /*
644 * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
645 * we need RXSTALE to flush input DMA fifo to memory
646 */
647 if (msm_port->is_uartdm < UARTDM_1P4)
648 msm_port->imr |= MSM_UART_IMR_RXSTALE;
649
650 msm_write(uart, msm_port->imr, MSM_UART_IMR);
651
652 dma->count = UARTDM_RX_SIZE;
653
654 dma_async_issue_pending(dma->chan);
655
656 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
657 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
658
659 val = msm_read(uart, UARTDM_DMEN);
660 val |= dma->enable_bit;
661
662 if (msm_port->is_uartdm < UARTDM_1P4)
663 msm_write(uart, val, UARTDM_DMEN);
664
665 msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX);
666
667 if (msm_port->is_uartdm > UARTDM_1P3)
668 msm_write(uart, val, UARTDM_DMEN);
669
670 return;
671unmap:
672 dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
673
674sw_mode:
675 /*
676 * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN),
677 * receiver must be reset.
678 */
679 msm_write(uart, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
680 msm_write(uart, MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
681
682 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
683 msm_write(uart, 0xFFFFFF, UARTDM_DMRX);
684 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
685
686 /* Re-enable RX interrupts */
687 msm_port->imr |= MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE;
688 msm_write(uart, msm_port->imr, MSM_UART_IMR);
689}
690
691static void msm_stop_rx(struct uart_port *port)
692{
693 struct msm_port *msm_port = to_msm_port(port);
694 struct msm_dma *dma = &msm_port->rx_dma;
695
696 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
697 msm_write(port, msm_port->imr, MSM_UART_IMR);
698
699 if (dma->chan)
700 msm_stop_dma(port, dma);
701}
702
703static void msm_enable_ms(struct uart_port *port)
704{
705 struct msm_port *msm_port = to_msm_port(port);
706
707 msm_port->imr |= MSM_UART_IMR_DELTA_CTS;
708 msm_write(port, msm_port->imr, MSM_UART_IMR);
709}
710
711static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
712 __must_hold(&port->lock)
713{
714 struct tty_port *tport = &port->state->port;
715 unsigned int sr;
716 int count = 0;
717 struct msm_port *msm_port = to_msm_port(port);
718
719 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
720 port->icount.overrun++;
721 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
722 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
723 }
724
725 if (misr & MSM_UART_IMR_RXSTALE) {
726 count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
727 msm_port->old_snap_state;
728 msm_port->old_snap_state = 0;
729 } else {
730 count = 4 * (msm_read(port, MSM_UART_RFWR));
731 msm_port->old_snap_state += count;
732 }
733
734 /* TODO: Precise error reporting */
735
736 port->icount.rx += count;
737
738 while (count > 0) {
739 unsigned char buf[4];
740 int sysrq, r_count, i;
741
742 sr = msm_read(port, MSM_UART_SR);
743 if ((sr & MSM_UART_SR_RX_READY) == 0) {
744 msm_port->old_snap_state -= count;
745 break;
746 }
747
748 ioread32_rep(port->membase + UARTDM_RF, buf, 1);
749 r_count = min_t(int, count, sizeof(buf));
750
751 for (i = 0; i < r_count; i++) {
752 char flag = TTY_NORMAL;
753
754 if (msm_port->break_detected && buf[i] == 0) {
755 port->icount.brk++;
756 flag = TTY_BREAK;
757 msm_port->break_detected = false;
758 if (uart_handle_break(port))
759 continue;
760 }
761
762 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
763 flag = TTY_NORMAL;
764
765 spin_unlock(&port->lock);
766 sysrq = uart_handle_sysrq_char(port, buf[i]);
767 spin_lock(&port->lock);
768 if (!sysrq)
769 tty_insert_flip_char(tport, buf[i], flag);
770 }
771 count -= r_count;
772 }
773
774 tty_flip_buffer_push(tport);
775
776 if (misr & (MSM_UART_IMR_RXSTALE))
777 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
778 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
779 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
780
781 /* Try to use DMA */
782 msm_start_rx_dma(msm_port);
783}
784
785static void msm_handle_rx(struct uart_port *port)
786 __must_hold(&port->lock)
787{
788 struct tty_port *tport = &port->state->port;
789 unsigned int sr;
790
791 /*
792 * Handle overrun. My understanding of the hardware is that overrun
793 * is not tied to the RX buffer, so we handle the case out of band.
794 */
795 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
796 port->icount.overrun++;
797 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
798 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
799 }
800
801 /* and now the main RX loop */
802 while ((sr = msm_read(port, MSM_UART_SR)) & MSM_UART_SR_RX_READY) {
803 unsigned int c;
804 char flag = TTY_NORMAL;
805 int sysrq;
806
807 c = msm_read(port, MSM_UART_RF);
808
809 if (sr & MSM_UART_SR_RX_BREAK) {
810 port->icount.brk++;
811 if (uart_handle_break(port))
812 continue;
813 } else if (sr & MSM_UART_SR_PAR_FRAME_ERR) {
814 port->icount.frame++;
815 } else {
816 port->icount.rx++;
817 }
818
819 /* Mask conditions we're ignoring. */
820 sr &= port->read_status_mask;
821
822 if (sr & MSM_UART_SR_RX_BREAK)
823 flag = TTY_BREAK;
824 else if (sr & MSM_UART_SR_PAR_FRAME_ERR)
825 flag = TTY_FRAME;
826
827 spin_unlock(&port->lock);
828 sysrq = uart_handle_sysrq_char(port, c);
829 spin_lock(&port->lock);
830 if (!sysrq)
831 tty_insert_flip_char(tport, c, flag);
832 }
833
834 tty_flip_buffer_push(tport);
835}
836
837static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
838{
839 struct circ_buf *xmit = &port->state->xmit;
840 struct msm_port *msm_port = to_msm_port(port);
841 unsigned int num_chars;
842 unsigned int tf_pointer = 0;
843 void __iomem *tf;
844
845 if (msm_port->is_uartdm)
846 tf = port->membase + UARTDM_TF;
847 else
848 tf = port->membase + MSM_UART_TF;
849
850 if (tx_count && msm_port->is_uartdm)
851 msm_reset_dm_count(port, tx_count);
852
853 while (tf_pointer < tx_count) {
854 int i;
855 char buf[4] = { 0 };
856
857 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
858 break;
859
860 if (msm_port->is_uartdm)
861 num_chars = min(tx_count - tf_pointer,
862 (unsigned int)sizeof(buf));
863 else
864 num_chars = 1;
865
866 for (i = 0; i < num_chars; i++)
867 buf[i] = xmit->buf[xmit->tail + i];
868
869 iowrite32_rep(tf, buf, 1);
870 uart_xmit_advance(port, num_chars);
871 tf_pointer += num_chars;
872 }
873
874 /* disable tx interrupts if nothing more to send */
875 if (uart_circ_empty(xmit))
876 msm_stop_tx(port);
877
878 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
879 uart_write_wakeup(port);
880}
881
882static void msm_handle_tx(struct uart_port *port)
883{
884 struct msm_port *msm_port = to_msm_port(port);
885 struct circ_buf *xmit = &msm_port->uart.state->xmit;
886 struct msm_dma *dma = &msm_port->tx_dma;
887 unsigned int pio_count, dma_count, dma_min;
888 char buf[4] = { 0 };
889 void __iomem *tf;
890 int err = 0;
891
892 if (port->x_char) {
893 if (msm_port->is_uartdm)
894 tf = port->membase + UARTDM_TF;
895 else
896 tf = port->membase + MSM_UART_TF;
897
898 buf[0] = port->x_char;
899
900 if (msm_port->is_uartdm)
901 msm_reset_dm_count(port, 1);
902
903 iowrite32_rep(tf, buf, 1);
904 port->icount.tx++;
905 port->x_char = 0;
906 return;
907 }
908
909 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
910 msm_stop_tx(port);
911 return;
912 }
913
914 pio_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
915 dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
916
917 dma_min = 1; /* Always DMA */
918 if (msm_port->is_uartdm > UARTDM_1P3) {
919 dma_count = UARTDM_TX_AIGN(dma_count);
920 dma_min = UARTDM_BURST_SIZE;
921 } else {
922 if (dma_count > UARTDM_TX_MAX)
923 dma_count = UARTDM_TX_MAX;
924 }
925
926 if (pio_count > port->fifosize)
927 pio_count = port->fifosize;
928
929 if (!dma->chan || dma_count < dma_min)
930 msm_handle_tx_pio(port, pio_count);
931 else
932 err = msm_handle_tx_dma(msm_port, dma_count);
933
934 if (err) /* fall back to PIO mode */
935 msm_handle_tx_pio(port, pio_count);
936}
937
938static void msm_handle_delta_cts(struct uart_port *port)
939{
940 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
941 port->icount.cts++;
942 wake_up_interruptible(&port->state->port.delta_msr_wait);
943}
944
945static irqreturn_t msm_uart_irq(int irq, void *dev_id)
946{
947 struct uart_port *port = dev_id;
948 struct msm_port *msm_port = to_msm_port(port);
949 struct msm_dma *dma = &msm_port->rx_dma;
950 unsigned long flags;
951 unsigned int misr;
952 u32 val;
953
954 spin_lock_irqsave(&port->lock, flags);
955 misr = msm_read(port, MSM_UART_MISR);
956 msm_write(port, 0, MSM_UART_IMR); /* disable interrupt */
957
958 if (misr & MSM_UART_IMR_RXBREAK_START) {
959 msm_port->break_detected = true;
960 msm_write(port, MSM_UART_CR_CMD_RESET_RXBREAK_START, MSM_UART_CR);
961 }
962
963 if (misr & (MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE)) {
964 if (dma->count) {
965 val = MSM_UART_CR_CMD_STALE_EVENT_DISABLE;
966 msm_write(port, val, MSM_UART_CR);
967 val = MSM_UART_CR_CMD_RESET_STALE_INT;
968 msm_write(port, val, MSM_UART_CR);
969 /*
970 * Flush DMA input fifo to memory, this will also
971 * trigger DMA RX completion
972 */
973 dmaengine_terminate_all(dma->chan);
974 } else if (msm_port->is_uartdm) {
975 msm_handle_rx_dm(port, misr);
976 } else {
977 msm_handle_rx(port);
978 }
979 }
980 if (misr & MSM_UART_IMR_TXLEV)
981 msm_handle_tx(port);
982 if (misr & MSM_UART_IMR_DELTA_CTS)
983 msm_handle_delta_cts(port);
984
985 msm_write(port, msm_port->imr, MSM_UART_IMR); /* restore interrupt */
986 spin_unlock_irqrestore(&port->lock, flags);
987
988 return IRQ_HANDLED;
989}
990
991static unsigned int msm_tx_empty(struct uart_port *port)
992{
993 return (msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
994}
995
996static unsigned int msm_get_mctrl(struct uart_port *port)
997{
998 return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
999}
1000
1001static void msm_reset(struct uart_port *port)
1002{
1003 struct msm_port *msm_port = to_msm_port(port);
1004 unsigned int mr;
1005
1006 /* reset everything */
1007 msm_write(port, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
1008 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
1009 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
1010 msm_write(port, MSM_UART_CR_CMD_RESET_BREAK_INT, MSM_UART_CR);
1011 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
1012 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
1013 mr = msm_read(port, MSM_UART_MR1);
1014 mr &= ~MSM_UART_MR1_RX_RDY_CTL;
1015 msm_write(port, mr, MSM_UART_MR1);
1016
1017 /* Disable DM modes */
1018 if (msm_port->is_uartdm)
1019 msm_write(port, 0, UARTDM_DMEN);
1020}
1021
1022static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
1023{
1024 unsigned int mr;
1025
1026 mr = msm_read(port, MSM_UART_MR1);
1027
1028 if (!(mctrl & TIOCM_RTS)) {
1029 mr &= ~MSM_UART_MR1_RX_RDY_CTL;
1030 msm_write(port, mr, MSM_UART_MR1);
1031 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
1032 } else {
1033 mr |= MSM_UART_MR1_RX_RDY_CTL;
1034 msm_write(port, mr, MSM_UART_MR1);
1035 }
1036}
1037
1038static void msm_break_ctl(struct uart_port *port, int break_ctl)
1039{
1040 if (break_ctl)
1041 msm_write(port, MSM_UART_CR_CMD_START_BREAK, MSM_UART_CR);
1042 else
1043 msm_write(port, MSM_UART_CR_CMD_STOP_BREAK, MSM_UART_CR);
1044}
1045
1046struct msm_baud_map {
1047 u16 divisor;
1048 u8 code;
1049 u8 rxstale;
1050};
1051
1052static const struct msm_baud_map *
1053msm_find_best_baud(struct uart_port *port, unsigned int baud,
1054 unsigned long *rate)
1055{
1056 struct msm_port *msm_port = to_msm_port(port);
1057 unsigned int divisor, result;
1058 unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX;
1059 const struct msm_baud_map *entry, *end, *best;
1060 static const struct msm_baud_map table[] = {
1061 { 1, 0xff, 31 },
1062 { 2, 0xee, 16 },
1063 { 3, 0xdd, 8 },
1064 { 4, 0xcc, 6 },
1065 { 6, 0xbb, 6 },
1066 { 8, 0xaa, 6 },
1067 { 12, 0x99, 6 },
1068 { 16, 0x88, 1 },
1069 { 24, 0x77, 1 },
1070 { 32, 0x66, 1 },
1071 { 48, 0x55, 1 },
1072 { 96, 0x44, 1 },
1073 { 192, 0x33, 1 },
1074 { 384, 0x22, 1 },
1075 { 768, 0x11, 1 },
1076 { 1536, 0x00, 1 },
1077 };
1078
1079 best = table; /* Default to smallest divider */
1080 target = clk_round_rate(msm_port->clk, 16 * baud);
1081 divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1082
1083 end = table + ARRAY_SIZE(table);
1084 entry = table;
1085 while (entry < end) {
1086 if (entry->divisor <= divisor) {
1087 result = target / entry->divisor / 16;
1088 diff = abs(result - baud);
1089
1090 /* Keep track of best entry */
1091 if (diff < best_diff) {
1092 best_diff = diff;
1093 best = entry;
1094 best_rate = target;
1095 }
1096
1097 if (result == baud)
1098 break;
1099 } else if (entry->divisor > divisor) {
1100 old = target;
1101 target = clk_round_rate(msm_port->clk, old + 1);
1102 /*
1103 * The rate didn't get any faster so we can't do
1104 * better at dividing it down
1105 */
1106 if (target == old)
1107 break;
1108
1109 /* Start the divisor search over at this new rate */
1110 entry = table;
1111 divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1112 continue;
1113 }
1114 entry++;
1115 }
1116
1117 *rate = best_rate;
1118 return best;
1119}
1120
1121static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
1122 unsigned long *saved_flags)
1123{
1124 unsigned int rxstale, watermark, mask;
1125 struct msm_port *msm_port = to_msm_port(port);
1126 const struct msm_baud_map *entry;
1127 unsigned long flags, rate;
1128
1129 flags = *saved_flags;
1130 spin_unlock_irqrestore(&port->lock, flags);
1131
1132 entry = msm_find_best_baud(port, baud, &rate);
1133 clk_set_rate(msm_port->clk, rate);
1134 baud = rate / 16 / entry->divisor;
1135
1136 spin_lock_irqsave(&port->lock, flags);
1137 *saved_flags = flags;
1138 port->uartclk = rate;
1139
1140 msm_write(port, entry->code, MSM_UART_CSR);
1141
1142 /* RX stale watermark */
1143 rxstale = entry->rxstale;
1144 watermark = MSM_UART_IPR_STALE_LSB & rxstale;
1145 if (msm_port->is_uartdm) {
1146 mask = MSM_UART_DM_IPR_STALE_TIMEOUT_MSB;
1147 } else {
1148 watermark |= MSM_UART_IPR_RXSTALE_LAST;
1149 mask = MSM_UART_IPR_STALE_TIMEOUT_MSB;
1150 }
1151
1152 watermark |= mask & (rxstale << 2);
1153
1154 msm_write(port, watermark, MSM_UART_IPR);
1155
1156 /* set RX watermark */
1157 watermark = (port->fifosize * 3) / 4;
1158 msm_write(port, watermark, MSM_UART_RFWR);
1159
1160 /* set TX watermark */
1161 msm_write(port, 10, MSM_UART_TFWR);
1162
1163 msm_write(port, MSM_UART_CR_CMD_PROTECTION_EN, MSM_UART_CR);
1164 msm_reset(port);
1165
1166 /* Enable RX and TX */
1167 msm_write(port, MSM_UART_CR_TX_ENABLE | MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
1168
1169 /* turn on RX and CTS interrupts */
1170 msm_port->imr = MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE |
1171 MSM_UART_IMR_CURRENT_CTS | MSM_UART_IMR_RXBREAK_START;
1172
1173 msm_write(port, msm_port->imr, MSM_UART_IMR);
1174
1175 if (msm_port->is_uartdm) {
1176 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
1177 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1178 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
1179 }
1180
1181 return baud;
1182}
1183
1184static void msm_init_clock(struct uart_port *port)
1185{
1186 struct msm_port *msm_port = to_msm_port(port);
1187
1188 clk_prepare_enable(msm_port->clk);
1189 clk_prepare_enable(msm_port->pclk);
1190 msm_serial_set_mnd_regs(port);
1191}
1192
1193static int msm_startup(struct uart_port *port)
1194{
1195 struct msm_port *msm_port = to_msm_port(port);
1196 unsigned int data, rfr_level, mask;
1197 int ret;
1198
1199 snprintf(msm_port->name, sizeof(msm_port->name),
1200 "msm_serial%d", port->line);
1201
1202 msm_init_clock(port);
1203
1204 if (likely(port->fifosize > 12))
1205 rfr_level = port->fifosize - 12;
1206 else
1207 rfr_level = port->fifosize;
1208
1209 /* set automatic RFR level */
1210 data = msm_read(port, MSM_UART_MR1);
1211
1212 if (msm_port->is_uartdm)
1213 mask = MSM_UART_DM_MR1_AUTO_RFR_LEVEL1;
1214 else
1215 mask = MSM_UART_MR1_AUTO_RFR_LEVEL1;
1216
1217 data &= ~mask;
1218 data &= ~MSM_UART_MR1_AUTO_RFR_LEVEL0;
1219 data |= mask & (rfr_level << 2);
1220 data |= MSM_UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
1221 msm_write(port, data, MSM_UART_MR1);
1222
1223 if (msm_port->is_uartdm) {
1224 msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
1225 msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
1226 }
1227
1228 ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
1229 msm_port->name, port);
1230 if (unlikely(ret))
1231 goto err_irq;
1232
1233 return 0;
1234
1235err_irq:
1236 if (msm_port->is_uartdm)
1237 msm_release_dma(msm_port);
1238
1239 clk_disable_unprepare(msm_port->pclk);
1240 clk_disable_unprepare(msm_port->clk);
1241
1242 return ret;
1243}
1244
1245static void msm_shutdown(struct uart_port *port)
1246{
1247 struct msm_port *msm_port = to_msm_port(port);
1248
1249 msm_port->imr = 0;
1250 msm_write(port, 0, MSM_UART_IMR); /* disable interrupts */
1251
1252 if (msm_port->is_uartdm)
1253 msm_release_dma(msm_port);
1254
1255 clk_disable_unprepare(msm_port->clk);
1256
1257 free_irq(port->irq, port);
1258}
1259
1260static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
1261 const struct ktermios *old)
1262{
1263 struct msm_port *msm_port = to_msm_port(port);
1264 struct msm_dma *dma = &msm_port->rx_dma;
1265 unsigned long flags;
1266 unsigned int baud, mr;
1267
1268 spin_lock_irqsave(&port->lock, flags);
1269
1270 if (dma->chan) /* Terminate if any */
1271 msm_stop_dma(port, dma);
1272
1273 /* calculate and set baud rate */
1274 baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
1275 baud = msm_set_baud_rate(port, baud, &flags);
1276 if (tty_termios_baud_rate(termios))
1277 tty_termios_encode_baud_rate(termios, baud, baud);
1278
1279 /* calculate parity */
1280 mr = msm_read(port, MSM_UART_MR2);
1281 mr &= ~MSM_UART_MR2_PARITY_MODE;
1282 if (termios->c_cflag & PARENB) {
1283 if (termios->c_cflag & PARODD)
1284 mr |= MSM_UART_MR2_PARITY_MODE_ODD;
1285 else if (termios->c_cflag & CMSPAR)
1286 mr |= MSM_UART_MR2_PARITY_MODE_SPACE;
1287 else
1288 mr |= MSM_UART_MR2_PARITY_MODE_EVEN;
1289 }
1290
1291 /* calculate bits per char */
1292 mr &= ~MSM_UART_MR2_BITS_PER_CHAR;
1293 switch (termios->c_cflag & CSIZE) {
1294 case CS5:
1295 mr |= MSM_UART_MR2_BITS_PER_CHAR_5;
1296 break;
1297 case CS6:
1298 mr |= MSM_UART_MR2_BITS_PER_CHAR_6;
1299 break;
1300 case CS7:
1301 mr |= MSM_UART_MR2_BITS_PER_CHAR_7;
1302 break;
1303 case CS8:
1304 default:
1305 mr |= MSM_UART_MR2_BITS_PER_CHAR_8;
1306 break;
1307 }
1308
1309 /* calculate stop bits */
1310 mr &= ~(MSM_UART_MR2_STOP_BIT_LEN_ONE | MSM_UART_MR2_STOP_BIT_LEN_TWO);
1311 if (termios->c_cflag & CSTOPB)
1312 mr |= MSM_UART_MR2_STOP_BIT_LEN_TWO;
1313 else
1314 mr |= MSM_UART_MR2_STOP_BIT_LEN_ONE;
1315
1316 /* set parity, bits per char, and stop bit */
1317 msm_write(port, mr, MSM_UART_MR2);
1318
1319 /* calculate and set hardware flow control */
1320 mr = msm_read(port, MSM_UART_MR1);
1321 mr &= ~(MSM_UART_MR1_CTS_CTL | MSM_UART_MR1_RX_RDY_CTL);
1322 if (termios->c_cflag & CRTSCTS) {
1323 mr |= MSM_UART_MR1_CTS_CTL;
1324 mr |= MSM_UART_MR1_RX_RDY_CTL;
1325 }
1326 msm_write(port, mr, MSM_UART_MR1);
1327
1328 /* Configure status bits to ignore based on termio flags. */
1329 port->read_status_mask = 0;
1330 if (termios->c_iflag & INPCK)
1331 port->read_status_mask |= MSM_UART_SR_PAR_FRAME_ERR;
1332 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
1333 port->read_status_mask |= MSM_UART_SR_RX_BREAK;
1334
1335 uart_update_timeout(port, termios->c_cflag, baud);
1336
1337 /* Try to use DMA */
1338 msm_start_rx_dma(msm_port);
1339
1340 spin_unlock_irqrestore(&port->lock, flags);
1341}
1342
1343static const char *msm_type(struct uart_port *port)
1344{
1345 return "MSM";
1346}
1347
1348static void msm_release_port(struct uart_port *port)
1349{
1350 struct platform_device *pdev = to_platform_device(port->dev);
1351 struct resource *uart_resource;
1352 resource_size_t size;
1353
1354 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1355 if (unlikely(!uart_resource))
1356 return;
1357 size = resource_size(uart_resource);
1358
1359 release_mem_region(port->mapbase, size);
1360 iounmap(port->membase);
1361 port->membase = NULL;
1362}
1363
1364static int msm_request_port(struct uart_port *port)
1365{
1366 struct platform_device *pdev = to_platform_device(port->dev);
1367 struct resource *uart_resource;
1368 resource_size_t size;
1369 int ret;
1370
1371 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1372 if (unlikely(!uart_resource))
1373 return -ENXIO;
1374
1375 size = resource_size(uart_resource);
1376
1377 if (!request_mem_region(port->mapbase, size, "msm_serial"))
1378 return -EBUSY;
1379
1380 port->membase = ioremap(port->mapbase, size);
1381 if (!port->membase) {
1382 ret = -EBUSY;
1383 goto fail_release_port;
1384 }
1385
1386 return 0;
1387
1388fail_release_port:
1389 release_mem_region(port->mapbase, size);
1390 return ret;
1391}
1392
1393static void msm_config_port(struct uart_port *port, int flags)
1394{
1395 int ret;
1396
1397 if (flags & UART_CONFIG_TYPE) {
1398 port->type = PORT_MSM;
1399 ret = msm_request_port(port);
1400 if (ret)
1401 return;
1402 }
1403}
1404
1405static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
1406{
1407 if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
1408 return -EINVAL;
1409 if (unlikely(port->irq != ser->irq))
1410 return -EINVAL;
1411 return 0;
1412}
1413
1414static void msm_power(struct uart_port *port, unsigned int state,
1415 unsigned int oldstate)
1416{
1417 struct msm_port *msm_port = to_msm_port(port);
1418
1419 switch (state) {
1420 case 0:
1421 clk_prepare_enable(msm_port->clk);
1422 clk_prepare_enable(msm_port->pclk);
1423 break;
1424 case 3:
1425 clk_disable_unprepare(msm_port->clk);
1426 clk_disable_unprepare(msm_port->pclk);
1427 break;
1428 default:
1429 pr_err("msm_serial: Unknown PM state %d\n", state);
1430 }
1431}
1432
1433#ifdef CONFIG_CONSOLE_POLL
1434static int msm_poll_get_char_single(struct uart_port *port)
1435{
1436 struct msm_port *msm_port = to_msm_port(port);
1437 unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : MSM_UART_RF;
1438
1439 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY))
1440 return NO_POLL_CHAR;
1441
1442 return msm_read(port, rf_reg) & 0xff;
1443}
1444
1445static int msm_poll_get_char_dm(struct uart_port *port)
1446{
1447 int c;
1448 static u32 slop;
1449 static int count;
1450 unsigned char *sp = (unsigned char *)&slop;
1451
1452 /* Check if a previous read had more than one char */
1453 if (count) {
1454 c = sp[sizeof(slop) - count];
1455 count--;
1456 /* Or if FIFO is empty */
1457 } else if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY)) {
1458 /*
1459 * If RX packing buffer has less than a word, force stale to
1460 * push contents into RX FIFO
1461 */
1462 count = msm_read(port, UARTDM_RXFS);
1463 count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
1464 if (count) {
1465 msm_write(port, MSM_UART_CR_CMD_FORCE_STALE, MSM_UART_CR);
1466 slop = msm_read(port, UARTDM_RF);
1467 c = sp[0];
1468 count--;
1469 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
1470 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1471 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
1472 } else {
1473 c = NO_POLL_CHAR;
1474 }
1475 /* FIFO has a word */
1476 } else {
1477 slop = msm_read(port, UARTDM_RF);
1478 c = sp[0];
1479 count = sizeof(slop) - 1;
1480 }
1481
1482 return c;
1483}
1484
1485static int msm_poll_get_char(struct uart_port *port)
1486{
1487 u32 imr;
1488 int c;
1489 struct msm_port *msm_port = to_msm_port(port);
1490
1491 /* Disable all interrupts */
1492 imr = msm_read(port, MSM_UART_IMR);
1493 msm_write(port, 0, MSM_UART_IMR);
1494
1495 if (msm_port->is_uartdm)
1496 c = msm_poll_get_char_dm(port);
1497 else
1498 c = msm_poll_get_char_single(port);
1499
1500 /* Enable interrupts */
1501 msm_write(port, imr, MSM_UART_IMR);
1502
1503 return c;
1504}
1505
1506static void msm_poll_put_char(struct uart_port *port, unsigned char c)
1507{
1508 u32 imr;
1509 struct msm_port *msm_port = to_msm_port(port);
1510
1511 /* Disable all interrupts */
1512 imr = msm_read(port, MSM_UART_IMR);
1513 msm_write(port, 0, MSM_UART_IMR);
1514
1515 if (msm_port->is_uartdm)
1516 msm_reset_dm_count(port, 1);
1517
1518 /* Wait until FIFO is empty */
1519 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1520 cpu_relax();
1521
1522 /* Write a character */
1523 msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : MSM_UART_TF);
1524
1525 /* Wait until FIFO is empty */
1526 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1527 cpu_relax();
1528
1529 /* Enable interrupts */
1530 msm_write(port, imr, MSM_UART_IMR);
1531}
1532#endif
1533
1534static const struct uart_ops msm_uart_pops = {
1535 .tx_empty = msm_tx_empty,
1536 .set_mctrl = msm_set_mctrl,
1537 .get_mctrl = msm_get_mctrl,
1538 .stop_tx = msm_stop_tx,
1539 .start_tx = msm_start_tx,
1540 .stop_rx = msm_stop_rx,
1541 .enable_ms = msm_enable_ms,
1542 .break_ctl = msm_break_ctl,
1543 .startup = msm_startup,
1544 .shutdown = msm_shutdown,
1545 .set_termios = msm_set_termios,
1546 .type = msm_type,
1547 .release_port = msm_release_port,
1548 .request_port = msm_request_port,
1549 .config_port = msm_config_port,
1550 .verify_port = msm_verify_port,
1551 .pm = msm_power,
1552#ifdef CONFIG_CONSOLE_POLL
1553 .poll_get_char = msm_poll_get_char,
1554 .poll_put_char = msm_poll_put_char,
1555#endif
1556};
1557
1558static struct msm_port msm_uart_ports[] = {
1559 {
1560 .uart = {
1561 .iotype = UPIO_MEM,
1562 .ops = &msm_uart_pops,
1563 .flags = UPF_BOOT_AUTOCONF,
1564 .fifosize = 64,
1565 .line = 0,
1566 },
1567 },
1568 {
1569 .uart = {
1570 .iotype = UPIO_MEM,
1571 .ops = &msm_uart_pops,
1572 .flags = UPF_BOOT_AUTOCONF,
1573 .fifosize = 64,
1574 .line = 1,
1575 },
1576 },
1577 {
1578 .uart = {
1579 .iotype = UPIO_MEM,
1580 .ops = &msm_uart_pops,
1581 .flags = UPF_BOOT_AUTOCONF,
1582 .fifosize = 64,
1583 .line = 2,
1584 },
1585 },
1586};
1587
1588#define MSM_UART_NR ARRAY_SIZE(msm_uart_ports)
1589
1590static inline struct uart_port *msm_get_port_from_line(unsigned int line)
1591{
1592 return &msm_uart_ports[line].uart;
1593}
1594
1595#ifdef CONFIG_SERIAL_MSM_CONSOLE
1596static void __msm_console_write(struct uart_port *port, const char *s,
1597 unsigned int count, bool is_uartdm)
1598{
1599 unsigned long flags;
1600 int i;
1601 int num_newlines = 0;
1602 bool replaced = false;
1603 void __iomem *tf;
1604 int locked = 1;
1605
1606 if (is_uartdm)
1607 tf = port->membase + UARTDM_TF;
1608 else
1609 tf = port->membase + MSM_UART_TF;
1610
1611 /* Account for newlines that will get a carriage return added */
1612 for (i = 0; i < count; i++)
1613 if (s[i] == '\n')
1614 num_newlines++;
1615 count += num_newlines;
1616
1617 local_irq_save(flags);
1618
1619 if (port->sysrq)
1620 locked = 0;
1621 else if (oops_in_progress)
1622 locked = spin_trylock(&port->lock);
1623 else
1624 spin_lock(&port->lock);
1625
1626 if (is_uartdm)
1627 msm_reset_dm_count(port, count);
1628
1629 i = 0;
1630 while (i < count) {
1631 int j;
1632 unsigned int num_chars;
1633 char buf[4] = { 0 };
1634
1635 if (is_uartdm)
1636 num_chars = min(count - i, (unsigned int)sizeof(buf));
1637 else
1638 num_chars = 1;
1639
1640 for (j = 0; j < num_chars; j++) {
1641 char c = *s;
1642
1643 if (c == '\n' && !replaced) {
1644 buf[j] = '\r';
1645 j++;
1646 replaced = true;
1647 }
1648 if (j < num_chars) {
1649 buf[j] = c;
1650 s++;
1651 replaced = false;
1652 }
1653 }
1654
1655 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1656 cpu_relax();
1657
1658 iowrite32_rep(tf, buf, 1);
1659 i += num_chars;
1660 }
1661
1662 if (locked)
1663 spin_unlock(&port->lock);
1664
1665 local_irq_restore(flags);
1666}
1667
1668static void msm_console_write(struct console *co, const char *s,
1669 unsigned int count)
1670{
1671 struct uart_port *port;
1672 struct msm_port *msm_port;
1673
1674 BUG_ON(co->index < 0 || co->index >= MSM_UART_NR);
1675
1676 port = msm_get_port_from_line(co->index);
1677 msm_port = to_msm_port(port);
1678
1679 __msm_console_write(port, s, count, msm_port->is_uartdm);
1680}
1681
1682static int msm_console_setup(struct console *co, char *options)
1683{
1684 struct uart_port *port;
1685 int baud = 115200;
1686 int bits = 8;
1687 int parity = 'n';
1688 int flow = 'n';
1689
1690 if (unlikely(co->index >= MSM_UART_NR || co->index < 0))
1691 return -ENXIO;
1692
1693 port = msm_get_port_from_line(co->index);
1694
1695 if (unlikely(!port->membase))
1696 return -ENXIO;
1697
1698 msm_init_clock(port);
1699
1700 if (options)
1701 uart_parse_options(options, &baud, &parity, &bits, &flow);
1702
1703 pr_info("msm_serial: console setup on port #%d\n", port->line);
1704
1705 return uart_set_options(port, co, baud, parity, bits, flow);
1706}
1707
1708static void
1709msm_serial_early_write(struct console *con, const char *s, unsigned n)
1710{
1711 struct earlycon_device *dev = con->data;
1712
1713 __msm_console_write(&dev->port, s, n, false);
1714}
1715
1716static int __init
1717msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
1718{
1719 if (!device->port.membase)
1720 return -ENODEV;
1721
1722 device->con->write = msm_serial_early_write;
1723 return 0;
1724}
1725OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
1726 msm_serial_early_console_setup);
1727
1728static void
1729msm_serial_early_write_dm(struct console *con, const char *s, unsigned n)
1730{
1731 struct earlycon_device *dev = con->data;
1732
1733 __msm_console_write(&dev->port, s, n, true);
1734}
1735
1736static int __init
1737msm_serial_early_console_setup_dm(struct earlycon_device *device,
1738 const char *opt)
1739{
1740 if (!device->port.membase)
1741 return -ENODEV;
1742
1743 device->con->write = msm_serial_early_write_dm;
1744 return 0;
1745}
1746OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
1747 msm_serial_early_console_setup_dm);
1748
1749static struct uart_driver msm_uart_driver;
1750
1751static struct console msm_console = {
1752 .name = "ttyMSM",
1753 .write = msm_console_write,
1754 .device = uart_console_device,
1755 .setup = msm_console_setup,
1756 .flags = CON_PRINTBUFFER,
1757 .index = -1,
1758 .data = &msm_uart_driver,
1759};
1760
1761#define MSM_CONSOLE (&msm_console)
1762
1763#else
1764#define MSM_CONSOLE NULL
1765#endif
1766
1767static struct uart_driver msm_uart_driver = {
1768 .owner = THIS_MODULE,
1769 .driver_name = "msm_serial",
1770 .dev_name = "ttyMSM",
1771 .nr = MSM_UART_NR,
1772 .cons = MSM_CONSOLE,
1773};
1774
1775static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
1776
1777static const struct of_device_id msm_uartdm_table[] = {
1778 { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
1779 { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
1780 { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
1781 { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
1782 { }
1783};
1784
1785static int msm_serial_probe(struct platform_device *pdev)
1786{
1787 struct msm_port *msm_port;
1788 struct resource *resource;
1789 struct uart_port *port;
1790 const struct of_device_id *id;
1791 int irq, line;
1792
1793 if (pdev->dev.of_node)
1794 line = of_alias_get_id(pdev->dev.of_node, "serial");
1795 else
1796 line = pdev->id;
1797
1798 if (line < 0)
1799 line = atomic_inc_return(&msm_uart_next_id) - 1;
1800
1801 if (unlikely(line < 0 || line >= MSM_UART_NR))
1802 return -ENXIO;
1803
1804 dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
1805
1806 port = msm_get_port_from_line(line);
1807 port->dev = &pdev->dev;
1808 msm_port = to_msm_port(port);
1809
1810 id = of_match_device(msm_uartdm_table, &pdev->dev);
1811 if (id)
1812 msm_port->is_uartdm = (unsigned long)id->data;
1813 else
1814 msm_port->is_uartdm = 0;
1815
1816 msm_port->clk = devm_clk_get(&pdev->dev, "core");
1817 if (IS_ERR(msm_port->clk))
1818 return PTR_ERR(msm_port->clk);
1819
1820 if (msm_port->is_uartdm) {
1821 msm_port->pclk = devm_clk_get(&pdev->dev, "iface");
1822 if (IS_ERR(msm_port->pclk))
1823 return PTR_ERR(msm_port->pclk);
1824 }
1825
1826 port->uartclk = clk_get_rate(msm_port->clk);
1827 dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk);
1828
1829 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1830 if (unlikely(!resource))
1831 return -ENXIO;
1832 port->mapbase = resource->start;
1833
1834 irq = platform_get_irq(pdev, 0);
1835 if (unlikely(irq < 0))
1836 return -ENXIO;
1837 port->irq = irq;
1838 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MSM_CONSOLE);
1839
1840 platform_set_drvdata(pdev, port);
1841
1842 return uart_add_one_port(&msm_uart_driver, port);
1843}
1844
1845static int msm_serial_remove(struct platform_device *pdev)
1846{
1847 struct uart_port *port = platform_get_drvdata(pdev);
1848
1849 uart_remove_one_port(&msm_uart_driver, port);
1850
1851 return 0;
1852}
1853
1854static const struct of_device_id msm_match_table[] = {
1855 { .compatible = "qcom,msm-uart" },
1856 { .compatible = "qcom,msm-uartdm" },
1857 {}
1858};
1859MODULE_DEVICE_TABLE(of, msm_match_table);
1860
1861static int __maybe_unused msm_serial_suspend(struct device *dev)
1862{
1863 struct msm_port *port = dev_get_drvdata(dev);
1864
1865 uart_suspend_port(&msm_uart_driver, &port->uart);
1866
1867 return 0;
1868}
1869
1870static int __maybe_unused msm_serial_resume(struct device *dev)
1871{
1872 struct msm_port *port = dev_get_drvdata(dev);
1873
1874 uart_resume_port(&msm_uart_driver, &port->uart);
1875
1876 return 0;
1877}
1878
1879static const struct dev_pm_ops msm_serial_dev_pm_ops = {
1880 SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume)
1881};
1882
1883static struct platform_driver msm_platform_driver = {
1884 .remove = msm_serial_remove,
1885 .probe = msm_serial_probe,
1886 .driver = {
1887 .name = "msm_serial",
1888 .pm = &msm_serial_dev_pm_ops,
1889 .of_match_table = msm_match_table,
1890 },
1891};
1892
1893static int __init msm_serial_init(void)
1894{
1895 int ret;
1896
1897 ret = uart_register_driver(&msm_uart_driver);
1898 if (unlikely(ret))
1899 return ret;
1900
1901 ret = platform_driver_register(&msm_platform_driver);
1902 if (unlikely(ret))
1903 uart_unregister_driver(&msm_uart_driver);
1904
1905 pr_info("msm_serial: driver initialized\n");
1906
1907 return ret;
1908}
1909
1910static void __exit msm_serial_exit(void)
1911{
1912 platform_driver_unregister(&msm_platform_driver);
1913 uart_unregister_driver(&msm_uart_driver);
1914}
1915
1916module_init(msm_serial_init);
1917module_exit(msm_serial_exit);
1918
1919MODULE_AUTHOR("Robert Love <rlove@google.com>");
1920MODULE_DESCRIPTION("Driver for msm7x serial device");
1921MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Driver for msm7k serial device and console
4 *
5 * Copyright (C) 2007 Google, Inc.
6 * Author: Robert Love <rlove@google.com>
7 * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
8 */
9
10#include <linux/kernel.h>
11#include <linux/atomic.h>
12#include <linux/dma/qcom_adm.h>
13#include <linux/dma-mapping.h>
14#include <linux/dmaengine.h>
15#include <linux/module.h>
16#include <linux/io.h>
17#include <linux/ioport.h>
18#include <linux/interrupt.h>
19#include <linux/init.h>
20#include <linux/console.h>
21#include <linux/tty.h>
22#include <linux/tty_flip.h>
23#include <linux/serial_core.h>
24#include <linux/slab.h>
25#include <linux/clk.h>
26#include <linux/platform_device.h>
27#include <linux/pm_opp.h>
28#include <linux/delay.h>
29#include <linux/of.h>
30#include <linux/of_device.h>
31#include <linux/wait.h>
32
33#define MSM_UART_MR1 0x0000
34
35#define MSM_UART_MR1_AUTO_RFR_LEVEL0 0x3F
36#define MSM_UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
37#define MSM_UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
38#define MSM_UART_MR1_RX_RDY_CTL BIT(7)
39#define MSM_UART_MR1_CTS_CTL BIT(6)
40
41#define MSM_UART_MR2 0x0004
42#define MSM_UART_MR2_ERROR_MODE BIT(6)
43#define MSM_UART_MR2_BITS_PER_CHAR 0x30
44#define MSM_UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
45#define MSM_UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
46#define MSM_UART_MR2_BITS_PER_CHAR_7 (0x2 << 4)
47#define MSM_UART_MR2_BITS_PER_CHAR_8 (0x3 << 4)
48#define MSM_UART_MR2_STOP_BIT_LEN_ONE (0x1 << 2)
49#define MSM_UART_MR2_STOP_BIT_LEN_TWO (0x3 << 2)
50#define MSM_UART_MR2_PARITY_MODE_NONE 0x0
51#define MSM_UART_MR2_PARITY_MODE_ODD 0x1
52#define MSM_UART_MR2_PARITY_MODE_EVEN 0x2
53#define MSM_UART_MR2_PARITY_MODE_SPACE 0x3
54#define MSM_UART_MR2_PARITY_MODE 0x3
55
56#define MSM_UART_CSR 0x0008
57
58#define MSM_UART_TF 0x000C
59#define UARTDM_TF 0x0070
60
61#define MSM_UART_CR 0x0010
62#define MSM_UART_CR_CMD_NULL (0 << 4)
63#define MSM_UART_CR_CMD_RESET_RX (1 << 4)
64#define MSM_UART_CR_CMD_RESET_TX (2 << 4)
65#define MSM_UART_CR_CMD_RESET_ERR (3 << 4)
66#define MSM_UART_CR_CMD_RESET_BREAK_INT (4 << 4)
67#define MSM_UART_CR_CMD_START_BREAK (5 << 4)
68#define MSM_UART_CR_CMD_STOP_BREAK (6 << 4)
69#define MSM_UART_CR_CMD_RESET_CTS (7 << 4)
70#define MSM_UART_CR_CMD_RESET_STALE_INT (8 << 4)
71#define MSM_UART_CR_CMD_PACKET_MODE (9 << 4)
72#define MSM_UART_CR_CMD_MODE_RESET (12 << 4)
73#define MSM_UART_CR_CMD_SET_RFR (13 << 4)
74#define MSM_UART_CR_CMD_RESET_RFR (14 << 4)
75#define MSM_UART_CR_CMD_PROTECTION_EN (16 << 4)
76#define MSM_UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
77#define MSM_UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
78#define MSM_UART_CR_CMD_FORCE_STALE (4 << 8)
79#define MSM_UART_CR_CMD_RESET_TX_READY (3 << 8)
80#define MSM_UART_CR_TX_DISABLE BIT(3)
81#define MSM_UART_CR_TX_ENABLE BIT(2)
82#define MSM_UART_CR_RX_DISABLE BIT(1)
83#define MSM_UART_CR_RX_ENABLE BIT(0)
84#define MSM_UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
85
86#define MSM_UART_IMR 0x0014
87#define MSM_UART_IMR_TXLEV BIT(0)
88#define MSM_UART_IMR_RXSTALE BIT(3)
89#define MSM_UART_IMR_RXLEV BIT(4)
90#define MSM_UART_IMR_DELTA_CTS BIT(5)
91#define MSM_UART_IMR_CURRENT_CTS BIT(6)
92#define MSM_UART_IMR_RXBREAK_START BIT(10)
93
94#define MSM_UART_IPR_RXSTALE_LAST 0x20
95#define MSM_UART_IPR_STALE_LSB 0x1F
96#define MSM_UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
97#define MSM_UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
98
99#define MSM_UART_IPR 0x0018
100#define MSM_UART_TFWR 0x001C
101#define MSM_UART_RFWR 0x0020
102#define MSM_UART_HCR 0x0024
103
104#define MSM_UART_MREG 0x0028
105#define MSM_UART_NREG 0x002C
106#define MSM_UART_DREG 0x0030
107#define MSM_UART_MNDREG 0x0034
108#define MSM_UART_IRDA 0x0038
109#define MSM_UART_MISR_MODE 0x0040
110#define MSM_UART_MISR_RESET 0x0044
111#define MSM_UART_MISR_EXPORT 0x0048
112#define MSM_UART_MISR_VAL 0x004C
113#define MSM_UART_TEST_CTRL 0x0050
114
115#define MSM_UART_SR 0x0008
116#define MSM_UART_SR_HUNT_CHAR BIT(7)
117#define MSM_UART_SR_RX_BREAK BIT(6)
118#define MSM_UART_SR_PAR_FRAME_ERR BIT(5)
119#define MSM_UART_SR_OVERRUN BIT(4)
120#define MSM_UART_SR_TX_EMPTY BIT(3)
121#define MSM_UART_SR_TX_READY BIT(2)
122#define MSM_UART_SR_RX_FULL BIT(1)
123#define MSM_UART_SR_RX_READY BIT(0)
124
125#define MSM_UART_RF 0x000C
126#define UARTDM_RF 0x0070
127#define MSM_UART_MISR 0x0010
128#define MSM_UART_ISR 0x0014
129#define MSM_UART_ISR_TX_READY BIT(7)
130
131#define UARTDM_RXFS 0x50
132#define UARTDM_RXFS_BUF_SHIFT 0x7
133#define UARTDM_RXFS_BUF_MASK 0x7
134
135#define UARTDM_DMEN 0x3C
136#define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
137#define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
138
139#define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */
140#define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */
141
142#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */
143#define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */
144
145#define UARTDM_DMRX 0x34
146#define UARTDM_NCF_TX 0x40
147#define UARTDM_RX_TOTAL_SNAP 0x38
148
149#define UARTDM_BURST_SIZE 16 /* in bytes */
150#define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */
151#define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */
152#define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4)
153
154enum {
155 UARTDM_1P1 = 1,
156 UARTDM_1P2,
157 UARTDM_1P3,
158 UARTDM_1P4,
159};
160
161struct msm_dma {
162 struct dma_chan *chan;
163 enum dma_data_direction dir;
164 dma_addr_t phys;
165 unsigned char *virt;
166 dma_cookie_t cookie;
167 u32 enable_bit;
168 unsigned int count;
169 struct dma_async_tx_descriptor *desc;
170};
171
172struct msm_port {
173 struct uart_port uart;
174 char name[16];
175 struct clk *clk;
176 struct clk *pclk;
177 unsigned int imr;
178 int is_uartdm;
179 unsigned int old_snap_state;
180 bool break_detected;
181 struct msm_dma tx_dma;
182 struct msm_dma rx_dma;
183};
184
185static inline struct msm_port *to_msm_port(struct uart_port *up)
186{
187 return container_of(up, struct msm_port, uart);
188}
189
190static
191void msm_write(struct uart_port *port, unsigned int val, unsigned int off)
192{
193 writel_relaxed(val, port->membase + off);
194}
195
196static
197unsigned int msm_read(struct uart_port *port, unsigned int off)
198{
199 return readl_relaxed(port->membase + off);
200}
201
202/*
203 * Setup the MND registers to use the TCXO clock.
204 */
205static void msm_serial_set_mnd_regs_tcxo(struct uart_port *port)
206{
207 msm_write(port, 0x06, MSM_UART_MREG);
208 msm_write(port, 0xF1, MSM_UART_NREG);
209 msm_write(port, 0x0F, MSM_UART_DREG);
210 msm_write(port, 0x1A, MSM_UART_MNDREG);
211 port->uartclk = 1843200;
212}
213
214/*
215 * Setup the MND registers to use the TCXO clock divided by 4.
216 */
217static void msm_serial_set_mnd_regs_tcxoby4(struct uart_port *port)
218{
219 msm_write(port, 0x18, MSM_UART_MREG);
220 msm_write(port, 0xF6, MSM_UART_NREG);
221 msm_write(port, 0x0F, MSM_UART_DREG);
222 msm_write(port, 0x0A, MSM_UART_MNDREG);
223 port->uartclk = 1843200;
224}
225
226static void msm_serial_set_mnd_regs(struct uart_port *port)
227{
228 struct msm_port *msm_port = to_msm_port(port);
229
230 /*
231 * These registers don't exist so we change the clk input rate
232 * on uartdm hardware instead
233 */
234 if (msm_port->is_uartdm)
235 return;
236
237 if (port->uartclk == 19200000)
238 msm_serial_set_mnd_regs_tcxo(port);
239 else if (port->uartclk == 4800000)
240 msm_serial_set_mnd_regs_tcxoby4(port);
241}
242
243static void msm_handle_tx(struct uart_port *port);
244static void msm_start_rx_dma(struct msm_port *msm_port);
245
246static void msm_stop_dma(struct uart_port *port, struct msm_dma *dma)
247{
248 struct device *dev = port->dev;
249 unsigned int mapped;
250 u32 val;
251
252 mapped = dma->count;
253 dma->count = 0;
254
255 dmaengine_terminate_all(dma->chan);
256
257 /*
258 * DMA Stall happens if enqueue and flush command happens concurrently.
259 * For example before changing the baud rate/protocol configuration and
260 * sending flush command to ADM, disable the channel of UARTDM.
261 * Note: should not reset the receiver here immediately as it is not
262 * suggested to do disable/reset or reset/disable at the same time.
263 */
264 val = msm_read(port, UARTDM_DMEN);
265 val &= ~dma->enable_bit;
266 msm_write(port, val, UARTDM_DMEN);
267
268 if (mapped)
269 dma_unmap_single(dev, dma->phys, mapped, dma->dir);
270}
271
272static void msm_release_dma(struct msm_port *msm_port)
273{
274 struct msm_dma *dma;
275
276 dma = &msm_port->tx_dma;
277 if (dma->chan) {
278 msm_stop_dma(&msm_port->uart, dma);
279 dma_release_channel(dma->chan);
280 }
281
282 memset(dma, 0, sizeof(*dma));
283
284 dma = &msm_port->rx_dma;
285 if (dma->chan) {
286 msm_stop_dma(&msm_port->uart, dma);
287 dma_release_channel(dma->chan);
288 kfree(dma->virt);
289 }
290
291 memset(dma, 0, sizeof(*dma));
292}
293
294static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
295{
296 struct device *dev = msm_port->uart.dev;
297 struct dma_slave_config conf;
298 struct qcom_adm_peripheral_config periph_conf = {};
299 struct msm_dma *dma;
300 u32 crci = 0;
301 int ret;
302
303 dma = &msm_port->tx_dma;
304
305 /* allocate DMA resources, if available */
306 dma->chan = dma_request_chan(dev, "tx");
307 if (IS_ERR(dma->chan))
308 goto no_tx;
309
310 of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci);
311
312 memset(&conf, 0, sizeof(conf));
313 conf.direction = DMA_MEM_TO_DEV;
314 conf.device_fc = true;
315 conf.dst_addr = base + UARTDM_TF;
316 conf.dst_maxburst = UARTDM_BURST_SIZE;
317 if (crci) {
318 conf.peripheral_config = &periph_conf;
319 conf.peripheral_size = sizeof(periph_conf);
320 periph_conf.crci = crci;
321 }
322
323 ret = dmaengine_slave_config(dma->chan, &conf);
324 if (ret)
325 goto rel_tx;
326
327 dma->dir = DMA_TO_DEVICE;
328
329 if (msm_port->is_uartdm < UARTDM_1P4)
330 dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE;
331 else
332 dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE;
333
334 return;
335
336rel_tx:
337 dma_release_channel(dma->chan);
338no_tx:
339 memset(dma, 0, sizeof(*dma));
340}
341
342static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
343{
344 struct device *dev = msm_port->uart.dev;
345 struct dma_slave_config conf;
346 struct qcom_adm_peripheral_config periph_conf = {};
347 struct msm_dma *dma;
348 u32 crci = 0;
349 int ret;
350
351 dma = &msm_port->rx_dma;
352
353 /* allocate DMA resources, if available */
354 dma->chan = dma_request_chan(dev, "rx");
355 if (IS_ERR(dma->chan))
356 goto no_rx;
357
358 of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci);
359
360 dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL);
361 if (!dma->virt)
362 goto rel_rx;
363
364 memset(&conf, 0, sizeof(conf));
365 conf.direction = DMA_DEV_TO_MEM;
366 conf.device_fc = true;
367 conf.src_addr = base + UARTDM_RF;
368 conf.src_maxburst = UARTDM_BURST_SIZE;
369 if (crci) {
370 conf.peripheral_config = &periph_conf;
371 conf.peripheral_size = sizeof(periph_conf);
372 periph_conf.crci = crci;
373 }
374
375 ret = dmaengine_slave_config(dma->chan, &conf);
376 if (ret)
377 goto err;
378
379 dma->dir = DMA_FROM_DEVICE;
380
381 if (msm_port->is_uartdm < UARTDM_1P4)
382 dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE;
383 else
384 dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE;
385
386 return;
387err:
388 kfree(dma->virt);
389rel_rx:
390 dma_release_channel(dma->chan);
391no_rx:
392 memset(dma, 0, sizeof(*dma));
393}
394
395static inline void msm_wait_for_xmitr(struct uart_port *port)
396{
397 unsigned int timeout = 500000;
398
399 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY)) {
400 if (msm_read(port, MSM_UART_ISR) & MSM_UART_ISR_TX_READY)
401 break;
402 udelay(1);
403 if (!timeout--)
404 break;
405 }
406 msm_write(port, MSM_UART_CR_CMD_RESET_TX_READY, MSM_UART_CR);
407}
408
409static void msm_stop_tx(struct uart_port *port)
410{
411 struct msm_port *msm_port = to_msm_port(port);
412
413 msm_port->imr &= ~MSM_UART_IMR_TXLEV;
414 msm_write(port, msm_port->imr, MSM_UART_IMR);
415}
416
417static void msm_start_tx(struct uart_port *port)
418{
419 struct msm_port *msm_port = to_msm_port(port);
420 struct msm_dma *dma = &msm_port->tx_dma;
421
422 /* Already started in DMA mode */
423 if (dma->count)
424 return;
425
426 msm_port->imr |= MSM_UART_IMR_TXLEV;
427 msm_write(port, msm_port->imr, MSM_UART_IMR);
428}
429
430static void msm_reset_dm_count(struct uart_port *port, int count)
431{
432 msm_wait_for_xmitr(port);
433 msm_write(port, count, UARTDM_NCF_TX);
434 msm_read(port, UARTDM_NCF_TX);
435}
436
437static void msm_complete_tx_dma(void *args)
438{
439 struct msm_port *msm_port = args;
440 struct uart_port *port = &msm_port->uart;
441 struct circ_buf *xmit = &port->state->xmit;
442 struct msm_dma *dma = &msm_port->tx_dma;
443 struct dma_tx_state state;
444 unsigned long flags;
445 unsigned int count;
446 u32 val;
447
448 uart_port_lock_irqsave(port, &flags);
449
450 /* Already stopped */
451 if (!dma->count)
452 goto done;
453
454 dmaengine_tx_status(dma->chan, dma->cookie, &state);
455
456 dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir);
457
458 val = msm_read(port, UARTDM_DMEN);
459 val &= ~dma->enable_bit;
460 msm_write(port, val, UARTDM_DMEN);
461
462 if (msm_port->is_uartdm > UARTDM_1P3) {
463 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
464 msm_write(port, MSM_UART_CR_TX_ENABLE, MSM_UART_CR);
465 }
466
467 count = dma->count - state.residue;
468 uart_xmit_advance(port, count);
469 dma->count = 0;
470
471 /* Restore "Tx FIFO below watermark" interrupt */
472 msm_port->imr |= MSM_UART_IMR_TXLEV;
473 msm_write(port, msm_port->imr, MSM_UART_IMR);
474
475 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
476 uart_write_wakeup(port);
477
478 msm_handle_tx(port);
479done:
480 uart_port_unlock_irqrestore(port, flags);
481}
482
483static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
484{
485 struct circ_buf *xmit = &msm_port->uart.state->xmit;
486 struct uart_port *port = &msm_port->uart;
487 struct msm_dma *dma = &msm_port->tx_dma;
488 void *cpu_addr;
489 int ret;
490 u32 val;
491
492 cpu_addr = &xmit->buf[xmit->tail];
493
494 dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir);
495 ret = dma_mapping_error(port->dev, dma->phys);
496 if (ret)
497 return ret;
498
499 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
500 count, DMA_MEM_TO_DEV,
501 DMA_PREP_INTERRUPT |
502 DMA_PREP_FENCE);
503 if (!dma->desc) {
504 ret = -EIO;
505 goto unmap;
506 }
507
508 dma->desc->callback = msm_complete_tx_dma;
509 dma->desc->callback_param = msm_port;
510
511 dma->cookie = dmaengine_submit(dma->desc);
512 ret = dma_submit_error(dma->cookie);
513 if (ret)
514 goto unmap;
515
516 /*
517 * Using DMA complete for Tx FIFO reload, no need for
518 * "Tx FIFO below watermark" one, disable it
519 */
520 msm_port->imr &= ~MSM_UART_IMR_TXLEV;
521 msm_write(port, msm_port->imr, MSM_UART_IMR);
522
523 dma->count = count;
524
525 val = msm_read(port, UARTDM_DMEN);
526 val |= dma->enable_bit;
527
528 if (msm_port->is_uartdm < UARTDM_1P4)
529 msm_write(port, val, UARTDM_DMEN);
530
531 msm_reset_dm_count(port, count);
532
533 if (msm_port->is_uartdm > UARTDM_1P3)
534 msm_write(port, val, UARTDM_DMEN);
535
536 dma_async_issue_pending(dma->chan);
537 return 0;
538unmap:
539 dma_unmap_single(port->dev, dma->phys, count, dma->dir);
540 return ret;
541}
542
543static void msm_complete_rx_dma(void *args)
544{
545 struct msm_port *msm_port = args;
546 struct uart_port *port = &msm_port->uart;
547 struct tty_port *tport = &port->state->port;
548 struct msm_dma *dma = &msm_port->rx_dma;
549 int count = 0, i, sysrq;
550 unsigned long flags;
551 u32 val;
552
553 uart_port_lock_irqsave(port, &flags);
554
555 /* Already stopped */
556 if (!dma->count)
557 goto done;
558
559 val = msm_read(port, UARTDM_DMEN);
560 val &= ~dma->enable_bit;
561 msm_write(port, val, UARTDM_DMEN);
562
563 if (msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN) {
564 port->icount.overrun++;
565 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
566 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
567 }
568
569 count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
570
571 port->icount.rx += count;
572
573 dma->count = 0;
574
575 dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
576
577 for (i = 0; i < count; i++) {
578 char flag = TTY_NORMAL;
579
580 if (msm_port->break_detected && dma->virt[i] == 0) {
581 port->icount.brk++;
582 flag = TTY_BREAK;
583 msm_port->break_detected = false;
584 if (uart_handle_break(port))
585 continue;
586 }
587
588 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
589 flag = TTY_NORMAL;
590
591 sysrq = uart_prepare_sysrq_char(port, dma->virt[i]);
592 if (!sysrq)
593 tty_insert_flip_char(tport, dma->virt[i], flag);
594 }
595
596 msm_start_rx_dma(msm_port);
597done:
598 uart_unlock_and_check_sysrq_irqrestore(port, flags);
599
600 if (count)
601 tty_flip_buffer_push(tport);
602}
603
604static void msm_start_rx_dma(struct msm_port *msm_port)
605{
606 struct msm_dma *dma = &msm_port->rx_dma;
607 struct uart_port *uart = &msm_port->uart;
608 u32 val;
609 int ret;
610
611 if (IS_ENABLED(CONFIG_CONSOLE_POLL))
612 return;
613
614 if (!dma->chan)
615 return;
616
617 dma->phys = dma_map_single(uart->dev, dma->virt,
618 UARTDM_RX_SIZE, dma->dir);
619 ret = dma_mapping_error(uart->dev, dma->phys);
620 if (ret)
621 goto sw_mode;
622
623 dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
624 UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
625 DMA_PREP_INTERRUPT);
626 if (!dma->desc)
627 goto unmap;
628
629 dma->desc->callback = msm_complete_rx_dma;
630 dma->desc->callback_param = msm_port;
631
632 dma->cookie = dmaengine_submit(dma->desc);
633 ret = dma_submit_error(dma->cookie);
634 if (ret)
635 goto unmap;
636 /*
637 * Using DMA for FIFO off-load, no need for "Rx FIFO over
638 * watermark" or "stale" interrupts, disable them
639 */
640 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
641
642 /*
643 * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
644 * we need RXSTALE to flush input DMA fifo to memory
645 */
646 if (msm_port->is_uartdm < UARTDM_1P4)
647 msm_port->imr |= MSM_UART_IMR_RXSTALE;
648
649 msm_write(uart, msm_port->imr, MSM_UART_IMR);
650
651 dma->count = UARTDM_RX_SIZE;
652
653 dma_async_issue_pending(dma->chan);
654
655 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
656 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
657
658 val = msm_read(uart, UARTDM_DMEN);
659 val |= dma->enable_bit;
660
661 if (msm_port->is_uartdm < UARTDM_1P4)
662 msm_write(uart, val, UARTDM_DMEN);
663
664 msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX);
665
666 if (msm_port->is_uartdm > UARTDM_1P3)
667 msm_write(uart, val, UARTDM_DMEN);
668
669 return;
670unmap:
671 dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
672
673sw_mode:
674 /*
675 * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN),
676 * receiver must be reset.
677 */
678 msm_write(uart, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
679 msm_write(uart, MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
680
681 msm_write(uart, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
682 msm_write(uart, 0xFFFFFF, UARTDM_DMRX);
683 msm_write(uart, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
684
685 /* Re-enable RX interrupts */
686 msm_port->imr |= MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE;
687 msm_write(uart, msm_port->imr, MSM_UART_IMR);
688}
689
690static void msm_stop_rx(struct uart_port *port)
691{
692 struct msm_port *msm_port = to_msm_port(port);
693 struct msm_dma *dma = &msm_port->rx_dma;
694
695 msm_port->imr &= ~(MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE);
696 msm_write(port, msm_port->imr, MSM_UART_IMR);
697
698 if (dma->chan)
699 msm_stop_dma(port, dma);
700}
701
702static void msm_enable_ms(struct uart_port *port)
703{
704 struct msm_port *msm_port = to_msm_port(port);
705
706 msm_port->imr |= MSM_UART_IMR_DELTA_CTS;
707 msm_write(port, msm_port->imr, MSM_UART_IMR);
708}
709
710static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
711 __must_hold(&port->lock)
712{
713 struct tty_port *tport = &port->state->port;
714 unsigned int sr;
715 int count = 0;
716 struct msm_port *msm_port = to_msm_port(port);
717
718 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
719 port->icount.overrun++;
720 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
721 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
722 }
723
724 if (misr & MSM_UART_IMR_RXSTALE) {
725 count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
726 msm_port->old_snap_state;
727 msm_port->old_snap_state = 0;
728 } else {
729 count = 4 * (msm_read(port, MSM_UART_RFWR));
730 msm_port->old_snap_state += count;
731 }
732
733 /* TODO: Precise error reporting */
734
735 port->icount.rx += count;
736
737 while (count > 0) {
738 unsigned char buf[4];
739 int sysrq, r_count, i;
740
741 sr = msm_read(port, MSM_UART_SR);
742 if ((sr & MSM_UART_SR_RX_READY) == 0) {
743 msm_port->old_snap_state -= count;
744 break;
745 }
746
747 ioread32_rep(port->membase + UARTDM_RF, buf, 1);
748 r_count = min_t(int, count, sizeof(buf));
749
750 for (i = 0; i < r_count; i++) {
751 char flag = TTY_NORMAL;
752
753 if (msm_port->break_detected && buf[i] == 0) {
754 port->icount.brk++;
755 flag = TTY_BREAK;
756 msm_port->break_detected = false;
757 if (uart_handle_break(port))
758 continue;
759 }
760
761 if (!(port->read_status_mask & MSM_UART_SR_RX_BREAK))
762 flag = TTY_NORMAL;
763
764 sysrq = uart_prepare_sysrq_char(port, buf[i]);
765 if (!sysrq)
766 tty_insert_flip_char(tport, buf[i], flag);
767 }
768 count -= r_count;
769 }
770
771 tty_flip_buffer_push(tport);
772
773 if (misr & (MSM_UART_IMR_RXSTALE))
774 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
775 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
776 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
777
778 /* Try to use DMA */
779 msm_start_rx_dma(msm_port);
780}
781
782static void msm_handle_rx(struct uart_port *port)
783 __must_hold(&port->lock)
784{
785 struct tty_port *tport = &port->state->port;
786 unsigned int sr;
787
788 /*
789 * Handle overrun. My understanding of the hardware is that overrun
790 * is not tied to the RX buffer, so we handle the case out of band.
791 */
792 if ((msm_read(port, MSM_UART_SR) & MSM_UART_SR_OVERRUN)) {
793 port->icount.overrun++;
794 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
795 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
796 }
797
798 /* and now the main RX loop */
799 while ((sr = msm_read(port, MSM_UART_SR)) & MSM_UART_SR_RX_READY) {
800 unsigned int c;
801 char flag = TTY_NORMAL;
802 int sysrq;
803
804 c = msm_read(port, MSM_UART_RF);
805
806 if (sr & MSM_UART_SR_RX_BREAK) {
807 port->icount.brk++;
808 if (uart_handle_break(port))
809 continue;
810 } else if (sr & MSM_UART_SR_PAR_FRAME_ERR) {
811 port->icount.frame++;
812 } else {
813 port->icount.rx++;
814 }
815
816 /* Mask conditions we're ignoring. */
817 sr &= port->read_status_mask;
818
819 if (sr & MSM_UART_SR_RX_BREAK)
820 flag = TTY_BREAK;
821 else if (sr & MSM_UART_SR_PAR_FRAME_ERR)
822 flag = TTY_FRAME;
823
824 sysrq = uart_prepare_sysrq_char(port, c);
825 if (!sysrq)
826 tty_insert_flip_char(tport, c, flag);
827 }
828
829 tty_flip_buffer_push(tport);
830}
831
832static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
833{
834 struct circ_buf *xmit = &port->state->xmit;
835 struct msm_port *msm_port = to_msm_port(port);
836 unsigned int num_chars;
837 unsigned int tf_pointer = 0;
838 void __iomem *tf;
839
840 if (msm_port->is_uartdm)
841 tf = port->membase + UARTDM_TF;
842 else
843 tf = port->membase + MSM_UART_TF;
844
845 if (tx_count && msm_port->is_uartdm)
846 msm_reset_dm_count(port, tx_count);
847
848 while (tf_pointer < tx_count) {
849 int i;
850 char buf[4] = { 0 };
851
852 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
853 break;
854
855 if (msm_port->is_uartdm)
856 num_chars = min(tx_count - tf_pointer,
857 (unsigned int)sizeof(buf));
858 else
859 num_chars = 1;
860
861 for (i = 0; i < num_chars; i++)
862 buf[i] = xmit->buf[xmit->tail + i];
863
864 iowrite32_rep(tf, buf, 1);
865 uart_xmit_advance(port, num_chars);
866 tf_pointer += num_chars;
867 }
868
869 /* disable tx interrupts if nothing more to send */
870 if (uart_circ_empty(xmit))
871 msm_stop_tx(port);
872
873 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
874 uart_write_wakeup(port);
875}
876
877static void msm_handle_tx(struct uart_port *port)
878{
879 struct msm_port *msm_port = to_msm_port(port);
880 struct circ_buf *xmit = &msm_port->uart.state->xmit;
881 struct msm_dma *dma = &msm_port->tx_dma;
882 unsigned int pio_count, dma_count, dma_min;
883 char buf[4] = { 0 };
884 void __iomem *tf;
885 int err = 0;
886
887 if (port->x_char) {
888 if (msm_port->is_uartdm)
889 tf = port->membase + UARTDM_TF;
890 else
891 tf = port->membase + MSM_UART_TF;
892
893 buf[0] = port->x_char;
894
895 if (msm_port->is_uartdm)
896 msm_reset_dm_count(port, 1);
897
898 iowrite32_rep(tf, buf, 1);
899 port->icount.tx++;
900 port->x_char = 0;
901 return;
902 }
903
904 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
905 msm_stop_tx(port);
906 return;
907 }
908
909 pio_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
910 dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
911
912 dma_min = 1; /* Always DMA */
913 if (msm_port->is_uartdm > UARTDM_1P3) {
914 dma_count = UARTDM_TX_AIGN(dma_count);
915 dma_min = UARTDM_BURST_SIZE;
916 } else {
917 if (dma_count > UARTDM_TX_MAX)
918 dma_count = UARTDM_TX_MAX;
919 }
920
921 if (pio_count > port->fifosize)
922 pio_count = port->fifosize;
923
924 if (!dma->chan || dma_count < dma_min)
925 msm_handle_tx_pio(port, pio_count);
926 else
927 err = msm_handle_tx_dma(msm_port, dma_count);
928
929 if (err) /* fall back to PIO mode */
930 msm_handle_tx_pio(port, pio_count);
931}
932
933static void msm_handle_delta_cts(struct uart_port *port)
934{
935 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
936 port->icount.cts++;
937 wake_up_interruptible(&port->state->port.delta_msr_wait);
938}
939
940static irqreturn_t msm_uart_irq(int irq, void *dev_id)
941{
942 struct uart_port *port = dev_id;
943 struct msm_port *msm_port = to_msm_port(port);
944 struct msm_dma *dma = &msm_port->rx_dma;
945 unsigned int misr;
946 u32 val;
947
948 uart_port_lock(port);
949 misr = msm_read(port, MSM_UART_MISR);
950 msm_write(port, 0, MSM_UART_IMR); /* disable interrupt */
951
952 if (misr & MSM_UART_IMR_RXBREAK_START) {
953 msm_port->break_detected = true;
954 msm_write(port, MSM_UART_CR_CMD_RESET_RXBREAK_START, MSM_UART_CR);
955 }
956
957 if (misr & (MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE)) {
958 if (dma->count) {
959 val = MSM_UART_CR_CMD_STALE_EVENT_DISABLE;
960 msm_write(port, val, MSM_UART_CR);
961 val = MSM_UART_CR_CMD_RESET_STALE_INT;
962 msm_write(port, val, MSM_UART_CR);
963 /*
964 * Flush DMA input fifo to memory, this will also
965 * trigger DMA RX completion
966 */
967 dmaengine_terminate_all(dma->chan);
968 } else if (msm_port->is_uartdm) {
969 msm_handle_rx_dm(port, misr);
970 } else {
971 msm_handle_rx(port);
972 }
973 }
974 if (misr & MSM_UART_IMR_TXLEV)
975 msm_handle_tx(port);
976 if (misr & MSM_UART_IMR_DELTA_CTS)
977 msm_handle_delta_cts(port);
978
979 msm_write(port, msm_port->imr, MSM_UART_IMR); /* restore interrupt */
980 uart_unlock_and_check_sysrq(port);
981
982 return IRQ_HANDLED;
983}
984
985static unsigned int msm_tx_empty(struct uart_port *port)
986{
987 return (msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
988}
989
990static unsigned int msm_get_mctrl(struct uart_port *port)
991{
992 return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
993}
994
995static void msm_reset(struct uart_port *port)
996{
997 struct msm_port *msm_port = to_msm_port(port);
998 unsigned int mr;
999
1000 /* reset everything */
1001 msm_write(port, MSM_UART_CR_CMD_RESET_RX, MSM_UART_CR);
1002 msm_write(port, MSM_UART_CR_CMD_RESET_TX, MSM_UART_CR);
1003 msm_write(port, MSM_UART_CR_CMD_RESET_ERR, MSM_UART_CR);
1004 msm_write(port, MSM_UART_CR_CMD_RESET_BREAK_INT, MSM_UART_CR);
1005 msm_write(port, MSM_UART_CR_CMD_RESET_CTS, MSM_UART_CR);
1006 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
1007 mr = msm_read(port, MSM_UART_MR1);
1008 mr &= ~MSM_UART_MR1_RX_RDY_CTL;
1009 msm_write(port, mr, MSM_UART_MR1);
1010
1011 /* Disable DM modes */
1012 if (msm_port->is_uartdm)
1013 msm_write(port, 0, UARTDM_DMEN);
1014}
1015
1016static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
1017{
1018 unsigned int mr;
1019
1020 mr = msm_read(port, MSM_UART_MR1);
1021
1022 if (!(mctrl & TIOCM_RTS)) {
1023 mr &= ~MSM_UART_MR1_RX_RDY_CTL;
1024 msm_write(port, mr, MSM_UART_MR1);
1025 msm_write(port, MSM_UART_CR_CMD_RESET_RFR, MSM_UART_CR);
1026 } else {
1027 mr |= MSM_UART_MR1_RX_RDY_CTL;
1028 msm_write(port, mr, MSM_UART_MR1);
1029 }
1030}
1031
1032static void msm_break_ctl(struct uart_port *port, int break_ctl)
1033{
1034 if (break_ctl)
1035 msm_write(port, MSM_UART_CR_CMD_START_BREAK, MSM_UART_CR);
1036 else
1037 msm_write(port, MSM_UART_CR_CMD_STOP_BREAK, MSM_UART_CR);
1038}
1039
1040struct msm_baud_map {
1041 u16 divisor;
1042 u8 code;
1043 u8 rxstale;
1044};
1045
1046static const struct msm_baud_map *
1047msm_find_best_baud(struct uart_port *port, unsigned int baud,
1048 unsigned long *rate)
1049{
1050 struct msm_port *msm_port = to_msm_port(port);
1051 unsigned int divisor, result;
1052 unsigned long target, old, best_rate = 0, diff, best_diff = ULONG_MAX;
1053 const struct msm_baud_map *entry, *end, *best;
1054 static const struct msm_baud_map table[] = {
1055 { 1, 0xff, 31 },
1056 { 2, 0xee, 16 },
1057 { 3, 0xdd, 8 },
1058 { 4, 0xcc, 6 },
1059 { 6, 0xbb, 6 },
1060 { 8, 0xaa, 6 },
1061 { 12, 0x99, 6 },
1062 { 16, 0x88, 1 },
1063 { 24, 0x77, 1 },
1064 { 32, 0x66, 1 },
1065 { 48, 0x55, 1 },
1066 { 96, 0x44, 1 },
1067 { 192, 0x33, 1 },
1068 { 384, 0x22, 1 },
1069 { 768, 0x11, 1 },
1070 { 1536, 0x00, 1 },
1071 };
1072
1073 best = table; /* Default to smallest divider */
1074 target = clk_round_rate(msm_port->clk, 16 * baud);
1075 divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1076
1077 end = table + ARRAY_SIZE(table);
1078 entry = table;
1079 while (entry < end) {
1080 if (entry->divisor <= divisor) {
1081 result = target / entry->divisor / 16;
1082 diff = abs(result - baud);
1083
1084 /* Keep track of best entry */
1085 if (diff < best_diff) {
1086 best_diff = diff;
1087 best = entry;
1088 best_rate = target;
1089 }
1090
1091 if (result == baud)
1092 break;
1093 } else if (entry->divisor > divisor) {
1094 old = target;
1095 target = clk_round_rate(msm_port->clk, old + 1);
1096 /*
1097 * The rate didn't get any faster so we can't do
1098 * better at dividing it down
1099 */
1100 if (target == old)
1101 break;
1102
1103 /* Start the divisor search over at this new rate */
1104 entry = table;
1105 divisor = DIV_ROUND_CLOSEST(target, 16 * baud);
1106 continue;
1107 }
1108 entry++;
1109 }
1110
1111 *rate = best_rate;
1112 return best;
1113}
1114
1115static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
1116 unsigned long *saved_flags)
1117 __must_hold(&port->lock)
1118{
1119 unsigned int rxstale, watermark, mask;
1120 struct msm_port *msm_port = to_msm_port(port);
1121 const struct msm_baud_map *entry;
1122 unsigned long flags, rate;
1123
1124 flags = *saved_flags;
1125 uart_port_unlock_irqrestore(port, flags);
1126
1127 entry = msm_find_best_baud(port, baud, &rate);
1128 dev_pm_opp_set_rate(port->dev, rate);
1129 baud = rate / 16 / entry->divisor;
1130
1131 uart_port_lock_irqsave(port, &flags);
1132 *saved_flags = flags;
1133 port->uartclk = rate;
1134
1135 msm_write(port, entry->code, MSM_UART_CSR);
1136
1137 /* RX stale watermark */
1138 rxstale = entry->rxstale;
1139 watermark = MSM_UART_IPR_STALE_LSB & rxstale;
1140 if (msm_port->is_uartdm) {
1141 mask = MSM_UART_DM_IPR_STALE_TIMEOUT_MSB;
1142 } else {
1143 watermark |= MSM_UART_IPR_RXSTALE_LAST;
1144 mask = MSM_UART_IPR_STALE_TIMEOUT_MSB;
1145 }
1146
1147 watermark |= mask & (rxstale << 2);
1148
1149 msm_write(port, watermark, MSM_UART_IPR);
1150
1151 /* set RX watermark */
1152 watermark = (port->fifosize * 3) / 4;
1153 msm_write(port, watermark, MSM_UART_RFWR);
1154
1155 /* set TX watermark */
1156 msm_write(port, 10, MSM_UART_TFWR);
1157
1158 msm_write(port, MSM_UART_CR_CMD_PROTECTION_EN, MSM_UART_CR);
1159 msm_reset(port);
1160
1161 /* Enable RX and TX */
1162 msm_write(port, MSM_UART_CR_TX_ENABLE | MSM_UART_CR_RX_ENABLE, MSM_UART_CR);
1163
1164 /* turn on RX and CTS interrupts */
1165 msm_port->imr = MSM_UART_IMR_RXLEV | MSM_UART_IMR_RXSTALE |
1166 MSM_UART_IMR_CURRENT_CTS | MSM_UART_IMR_RXBREAK_START;
1167
1168 msm_write(port, msm_port->imr, MSM_UART_IMR);
1169
1170 if (msm_port->is_uartdm) {
1171 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
1172 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1173 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
1174 }
1175
1176 return baud;
1177}
1178
1179static void msm_init_clock(struct uart_port *port)
1180{
1181 struct msm_port *msm_port = to_msm_port(port);
1182
1183 dev_pm_opp_set_rate(port->dev, port->uartclk);
1184 clk_prepare_enable(msm_port->clk);
1185 clk_prepare_enable(msm_port->pclk);
1186 msm_serial_set_mnd_regs(port);
1187}
1188
1189static int msm_startup(struct uart_port *port)
1190{
1191 struct msm_port *msm_port = to_msm_port(port);
1192 unsigned int data, rfr_level, mask;
1193 int ret;
1194
1195 snprintf(msm_port->name, sizeof(msm_port->name),
1196 "msm_serial%d", port->line);
1197
1198 msm_init_clock(port);
1199
1200 if (likely(port->fifosize > 12))
1201 rfr_level = port->fifosize - 12;
1202 else
1203 rfr_level = port->fifosize;
1204
1205 /* set automatic RFR level */
1206 data = msm_read(port, MSM_UART_MR1);
1207
1208 if (msm_port->is_uartdm)
1209 mask = MSM_UART_DM_MR1_AUTO_RFR_LEVEL1;
1210 else
1211 mask = MSM_UART_MR1_AUTO_RFR_LEVEL1;
1212
1213 data &= ~mask;
1214 data &= ~MSM_UART_MR1_AUTO_RFR_LEVEL0;
1215 data |= mask & (rfr_level << 2);
1216 data |= MSM_UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
1217 msm_write(port, data, MSM_UART_MR1);
1218
1219 if (msm_port->is_uartdm) {
1220 msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
1221 msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
1222 }
1223
1224 ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
1225 msm_port->name, port);
1226 if (unlikely(ret))
1227 goto err_irq;
1228
1229 return 0;
1230
1231err_irq:
1232 if (msm_port->is_uartdm)
1233 msm_release_dma(msm_port);
1234
1235 clk_disable_unprepare(msm_port->pclk);
1236 clk_disable_unprepare(msm_port->clk);
1237 dev_pm_opp_set_rate(port->dev, 0);
1238
1239 return ret;
1240}
1241
1242static void msm_shutdown(struct uart_port *port)
1243{
1244 struct msm_port *msm_port = to_msm_port(port);
1245
1246 msm_port->imr = 0;
1247 msm_write(port, 0, MSM_UART_IMR); /* disable interrupts */
1248
1249 if (msm_port->is_uartdm)
1250 msm_release_dma(msm_port);
1251
1252 clk_disable_unprepare(msm_port->clk);
1253 dev_pm_opp_set_rate(port->dev, 0);
1254
1255 free_irq(port->irq, port);
1256}
1257
1258static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
1259 const struct ktermios *old)
1260{
1261 struct msm_port *msm_port = to_msm_port(port);
1262 struct msm_dma *dma = &msm_port->rx_dma;
1263 unsigned long flags;
1264 unsigned int baud, mr;
1265
1266 uart_port_lock_irqsave(port, &flags);
1267
1268 if (dma->chan) /* Terminate if any */
1269 msm_stop_dma(port, dma);
1270
1271 /* calculate and set baud rate */
1272 baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
1273 baud = msm_set_baud_rate(port, baud, &flags);
1274 if (tty_termios_baud_rate(termios))
1275 tty_termios_encode_baud_rate(termios, baud, baud);
1276
1277 /* calculate parity */
1278 mr = msm_read(port, MSM_UART_MR2);
1279 mr &= ~MSM_UART_MR2_PARITY_MODE;
1280 if (termios->c_cflag & PARENB) {
1281 if (termios->c_cflag & PARODD)
1282 mr |= MSM_UART_MR2_PARITY_MODE_ODD;
1283 else if (termios->c_cflag & CMSPAR)
1284 mr |= MSM_UART_MR2_PARITY_MODE_SPACE;
1285 else
1286 mr |= MSM_UART_MR2_PARITY_MODE_EVEN;
1287 }
1288
1289 /* calculate bits per char */
1290 mr &= ~MSM_UART_MR2_BITS_PER_CHAR;
1291 switch (termios->c_cflag & CSIZE) {
1292 case CS5:
1293 mr |= MSM_UART_MR2_BITS_PER_CHAR_5;
1294 break;
1295 case CS6:
1296 mr |= MSM_UART_MR2_BITS_PER_CHAR_6;
1297 break;
1298 case CS7:
1299 mr |= MSM_UART_MR2_BITS_PER_CHAR_7;
1300 break;
1301 case CS8:
1302 default:
1303 mr |= MSM_UART_MR2_BITS_PER_CHAR_8;
1304 break;
1305 }
1306
1307 /* calculate stop bits */
1308 mr &= ~(MSM_UART_MR2_STOP_BIT_LEN_ONE | MSM_UART_MR2_STOP_BIT_LEN_TWO);
1309 if (termios->c_cflag & CSTOPB)
1310 mr |= MSM_UART_MR2_STOP_BIT_LEN_TWO;
1311 else
1312 mr |= MSM_UART_MR2_STOP_BIT_LEN_ONE;
1313
1314 /* set parity, bits per char, and stop bit */
1315 msm_write(port, mr, MSM_UART_MR2);
1316
1317 /* calculate and set hardware flow control */
1318 mr = msm_read(port, MSM_UART_MR1);
1319 mr &= ~(MSM_UART_MR1_CTS_CTL | MSM_UART_MR1_RX_RDY_CTL);
1320 if (termios->c_cflag & CRTSCTS) {
1321 mr |= MSM_UART_MR1_CTS_CTL;
1322 mr |= MSM_UART_MR1_RX_RDY_CTL;
1323 }
1324 msm_write(port, mr, MSM_UART_MR1);
1325
1326 /* Configure status bits to ignore based on termio flags. */
1327 port->read_status_mask = 0;
1328 if (termios->c_iflag & INPCK)
1329 port->read_status_mask |= MSM_UART_SR_PAR_FRAME_ERR;
1330 if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
1331 port->read_status_mask |= MSM_UART_SR_RX_BREAK;
1332
1333 uart_update_timeout(port, termios->c_cflag, baud);
1334
1335 /* Try to use DMA */
1336 msm_start_rx_dma(msm_port);
1337
1338 uart_port_unlock_irqrestore(port, flags);
1339}
1340
1341static const char *msm_type(struct uart_port *port)
1342{
1343 return "MSM";
1344}
1345
1346static void msm_release_port(struct uart_port *port)
1347{
1348 struct platform_device *pdev = to_platform_device(port->dev);
1349 struct resource *uart_resource;
1350 resource_size_t size;
1351
1352 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1353 if (unlikely(!uart_resource))
1354 return;
1355 size = resource_size(uart_resource);
1356
1357 release_mem_region(port->mapbase, size);
1358 iounmap(port->membase);
1359 port->membase = NULL;
1360}
1361
1362static int msm_request_port(struct uart_port *port)
1363{
1364 struct platform_device *pdev = to_platform_device(port->dev);
1365 struct resource *uart_resource;
1366 resource_size_t size;
1367 int ret;
1368
1369 uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1370 if (unlikely(!uart_resource))
1371 return -ENXIO;
1372
1373 size = resource_size(uart_resource);
1374
1375 if (!request_mem_region(port->mapbase, size, "msm_serial"))
1376 return -EBUSY;
1377
1378 port->membase = ioremap(port->mapbase, size);
1379 if (!port->membase) {
1380 ret = -EBUSY;
1381 goto fail_release_port;
1382 }
1383
1384 return 0;
1385
1386fail_release_port:
1387 release_mem_region(port->mapbase, size);
1388 return ret;
1389}
1390
1391static void msm_config_port(struct uart_port *port, int flags)
1392{
1393 int ret;
1394
1395 if (flags & UART_CONFIG_TYPE) {
1396 port->type = PORT_MSM;
1397 ret = msm_request_port(port);
1398 if (ret)
1399 return;
1400 }
1401}
1402
1403static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
1404{
1405 if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
1406 return -EINVAL;
1407 if (unlikely(port->irq != ser->irq))
1408 return -EINVAL;
1409 return 0;
1410}
1411
1412static void msm_power(struct uart_port *port, unsigned int state,
1413 unsigned int oldstate)
1414{
1415 struct msm_port *msm_port = to_msm_port(port);
1416
1417 switch (state) {
1418 case 0:
1419 dev_pm_opp_set_rate(port->dev, port->uartclk);
1420 clk_prepare_enable(msm_port->clk);
1421 clk_prepare_enable(msm_port->pclk);
1422 break;
1423 case 3:
1424 clk_disable_unprepare(msm_port->clk);
1425 dev_pm_opp_set_rate(port->dev, 0);
1426 clk_disable_unprepare(msm_port->pclk);
1427 break;
1428 default:
1429 pr_err("msm_serial: Unknown PM state %d\n", state);
1430 }
1431}
1432
1433#ifdef CONFIG_CONSOLE_POLL
1434static int msm_poll_get_char_single(struct uart_port *port)
1435{
1436 struct msm_port *msm_port = to_msm_port(port);
1437 unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : MSM_UART_RF;
1438
1439 if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY))
1440 return NO_POLL_CHAR;
1441
1442 return msm_read(port, rf_reg) & 0xff;
1443}
1444
1445static int msm_poll_get_char_dm(struct uart_port *port)
1446{
1447 int c;
1448 static u32 slop;
1449 static int count;
1450 unsigned char *sp = (unsigned char *)&slop;
1451
1452 /* Check if a previous read had more than one char */
1453 if (count) {
1454 c = sp[sizeof(slop) - count];
1455 count--;
1456 /* Or if FIFO is empty */
1457 } else if (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_RX_READY)) {
1458 /*
1459 * If RX packing buffer has less than a word, force stale to
1460 * push contents into RX FIFO
1461 */
1462 count = msm_read(port, UARTDM_RXFS);
1463 count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
1464 if (count) {
1465 msm_write(port, MSM_UART_CR_CMD_FORCE_STALE, MSM_UART_CR);
1466 slop = msm_read(port, UARTDM_RF);
1467 c = sp[0];
1468 count--;
1469 msm_write(port, MSM_UART_CR_CMD_RESET_STALE_INT, MSM_UART_CR);
1470 msm_write(port, 0xFFFFFF, UARTDM_DMRX);
1471 msm_write(port, MSM_UART_CR_CMD_STALE_EVENT_ENABLE, MSM_UART_CR);
1472 } else {
1473 c = NO_POLL_CHAR;
1474 }
1475 /* FIFO has a word */
1476 } else {
1477 slop = msm_read(port, UARTDM_RF);
1478 c = sp[0];
1479 count = sizeof(slop) - 1;
1480 }
1481
1482 return c;
1483}
1484
1485static int msm_poll_get_char(struct uart_port *port)
1486{
1487 u32 imr;
1488 int c;
1489 struct msm_port *msm_port = to_msm_port(port);
1490
1491 /* Disable all interrupts */
1492 imr = msm_read(port, MSM_UART_IMR);
1493 msm_write(port, 0, MSM_UART_IMR);
1494
1495 if (msm_port->is_uartdm)
1496 c = msm_poll_get_char_dm(port);
1497 else
1498 c = msm_poll_get_char_single(port);
1499
1500 /* Enable interrupts */
1501 msm_write(port, imr, MSM_UART_IMR);
1502
1503 return c;
1504}
1505
1506static void msm_poll_put_char(struct uart_port *port, unsigned char c)
1507{
1508 u32 imr;
1509 struct msm_port *msm_port = to_msm_port(port);
1510
1511 /* Disable all interrupts */
1512 imr = msm_read(port, MSM_UART_IMR);
1513 msm_write(port, 0, MSM_UART_IMR);
1514
1515 if (msm_port->is_uartdm)
1516 msm_reset_dm_count(port, 1);
1517
1518 /* Wait until FIFO is empty */
1519 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1520 cpu_relax();
1521
1522 /* Write a character */
1523 msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : MSM_UART_TF);
1524
1525 /* Wait until FIFO is empty */
1526 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1527 cpu_relax();
1528
1529 /* Enable interrupts */
1530 msm_write(port, imr, MSM_UART_IMR);
1531}
1532#endif
1533
1534static const struct uart_ops msm_uart_pops = {
1535 .tx_empty = msm_tx_empty,
1536 .set_mctrl = msm_set_mctrl,
1537 .get_mctrl = msm_get_mctrl,
1538 .stop_tx = msm_stop_tx,
1539 .start_tx = msm_start_tx,
1540 .stop_rx = msm_stop_rx,
1541 .enable_ms = msm_enable_ms,
1542 .break_ctl = msm_break_ctl,
1543 .startup = msm_startup,
1544 .shutdown = msm_shutdown,
1545 .set_termios = msm_set_termios,
1546 .type = msm_type,
1547 .release_port = msm_release_port,
1548 .request_port = msm_request_port,
1549 .config_port = msm_config_port,
1550 .verify_port = msm_verify_port,
1551 .pm = msm_power,
1552#ifdef CONFIG_CONSOLE_POLL
1553 .poll_get_char = msm_poll_get_char,
1554 .poll_put_char = msm_poll_put_char,
1555#endif
1556};
1557
1558static struct msm_port msm_uart_ports[] = {
1559 {
1560 .uart = {
1561 .iotype = UPIO_MEM,
1562 .ops = &msm_uart_pops,
1563 .flags = UPF_BOOT_AUTOCONF,
1564 .fifosize = 64,
1565 .line = 0,
1566 },
1567 },
1568 {
1569 .uart = {
1570 .iotype = UPIO_MEM,
1571 .ops = &msm_uart_pops,
1572 .flags = UPF_BOOT_AUTOCONF,
1573 .fifosize = 64,
1574 .line = 1,
1575 },
1576 },
1577 {
1578 .uart = {
1579 .iotype = UPIO_MEM,
1580 .ops = &msm_uart_pops,
1581 .flags = UPF_BOOT_AUTOCONF,
1582 .fifosize = 64,
1583 .line = 2,
1584 },
1585 },
1586};
1587
1588#define MSM_UART_NR ARRAY_SIZE(msm_uart_ports)
1589
1590static inline struct uart_port *msm_get_port_from_line(unsigned int line)
1591{
1592 return &msm_uart_ports[line].uart;
1593}
1594
1595#ifdef CONFIG_SERIAL_MSM_CONSOLE
1596static void __msm_console_write(struct uart_port *port, const char *s,
1597 unsigned int count, bool is_uartdm)
1598{
1599 unsigned long flags;
1600 int i;
1601 int num_newlines = 0;
1602 bool replaced = false;
1603 void __iomem *tf;
1604 int locked = 1;
1605
1606 if (is_uartdm)
1607 tf = port->membase + UARTDM_TF;
1608 else
1609 tf = port->membase + MSM_UART_TF;
1610
1611 /* Account for newlines that will get a carriage return added */
1612 for (i = 0; i < count; i++)
1613 if (s[i] == '\n')
1614 num_newlines++;
1615 count += num_newlines;
1616
1617 if (oops_in_progress)
1618 locked = uart_port_trylock_irqsave(port, &flags);
1619 else
1620 uart_port_lock_irqsave(port, &flags);
1621
1622 if (is_uartdm)
1623 msm_reset_dm_count(port, count);
1624
1625 i = 0;
1626 while (i < count) {
1627 int j;
1628 unsigned int num_chars;
1629 char buf[4] = { 0 };
1630
1631 if (is_uartdm)
1632 num_chars = min(count - i, (unsigned int)sizeof(buf));
1633 else
1634 num_chars = 1;
1635
1636 for (j = 0; j < num_chars; j++) {
1637 char c = *s;
1638
1639 if (c == '\n' && !replaced) {
1640 buf[j] = '\r';
1641 j++;
1642 replaced = true;
1643 }
1644 if (j < num_chars) {
1645 buf[j] = c;
1646 s++;
1647 replaced = false;
1648 }
1649 }
1650
1651 while (!(msm_read(port, MSM_UART_SR) & MSM_UART_SR_TX_READY))
1652 cpu_relax();
1653
1654 iowrite32_rep(tf, buf, 1);
1655 i += num_chars;
1656 }
1657
1658 if (locked)
1659 uart_port_unlock_irqrestore(port, flags);
1660}
1661
1662static void msm_console_write(struct console *co, const char *s,
1663 unsigned int count)
1664{
1665 struct uart_port *port;
1666 struct msm_port *msm_port;
1667
1668 BUG_ON(co->index < 0 || co->index >= MSM_UART_NR);
1669
1670 port = msm_get_port_from_line(co->index);
1671 msm_port = to_msm_port(port);
1672
1673 __msm_console_write(port, s, count, msm_port->is_uartdm);
1674}
1675
1676static int msm_console_setup(struct console *co, char *options)
1677{
1678 struct uart_port *port;
1679 int baud = 115200;
1680 int bits = 8;
1681 int parity = 'n';
1682 int flow = 'n';
1683
1684 if (unlikely(co->index >= MSM_UART_NR || co->index < 0))
1685 return -ENXIO;
1686
1687 port = msm_get_port_from_line(co->index);
1688
1689 if (unlikely(!port->membase))
1690 return -ENXIO;
1691
1692 msm_init_clock(port);
1693
1694 if (options)
1695 uart_parse_options(options, &baud, &parity, &bits, &flow);
1696
1697 pr_info("msm_serial: console setup on port #%d\n", port->line);
1698
1699 return uart_set_options(port, co, baud, parity, bits, flow);
1700}
1701
1702static void
1703msm_serial_early_write(struct console *con, const char *s, unsigned n)
1704{
1705 struct earlycon_device *dev = con->data;
1706
1707 __msm_console_write(&dev->port, s, n, false);
1708}
1709
1710static int __init
1711msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
1712{
1713 if (!device->port.membase)
1714 return -ENODEV;
1715
1716 device->con->write = msm_serial_early_write;
1717 return 0;
1718}
1719OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
1720 msm_serial_early_console_setup);
1721
1722static void
1723msm_serial_early_write_dm(struct console *con, const char *s, unsigned n)
1724{
1725 struct earlycon_device *dev = con->data;
1726
1727 __msm_console_write(&dev->port, s, n, true);
1728}
1729
1730static int __init
1731msm_serial_early_console_setup_dm(struct earlycon_device *device,
1732 const char *opt)
1733{
1734 if (!device->port.membase)
1735 return -ENODEV;
1736
1737 device->con->write = msm_serial_early_write_dm;
1738 return 0;
1739}
1740OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
1741 msm_serial_early_console_setup_dm);
1742
1743static struct uart_driver msm_uart_driver;
1744
1745static struct console msm_console = {
1746 .name = "ttyMSM",
1747 .write = msm_console_write,
1748 .device = uart_console_device,
1749 .setup = msm_console_setup,
1750 .flags = CON_PRINTBUFFER,
1751 .index = -1,
1752 .data = &msm_uart_driver,
1753};
1754
1755#define MSM_CONSOLE (&msm_console)
1756
1757#else
1758#define MSM_CONSOLE NULL
1759#endif
1760
1761static struct uart_driver msm_uart_driver = {
1762 .owner = THIS_MODULE,
1763 .driver_name = "msm_serial",
1764 .dev_name = "ttyMSM",
1765 .nr = MSM_UART_NR,
1766 .cons = MSM_CONSOLE,
1767};
1768
1769static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
1770
1771static const struct of_device_id msm_uartdm_table[] = {
1772 { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
1773 { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
1774 { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
1775 { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
1776 { }
1777};
1778
1779static int msm_serial_probe(struct platform_device *pdev)
1780{
1781 struct msm_port *msm_port;
1782 struct resource *resource;
1783 struct uart_port *port;
1784 const struct of_device_id *id;
1785 int irq, line, ret;
1786
1787 if (pdev->dev.of_node)
1788 line = of_alias_get_id(pdev->dev.of_node, "serial");
1789 else
1790 line = pdev->id;
1791
1792 if (line < 0)
1793 line = atomic_inc_return(&msm_uart_next_id) - 1;
1794
1795 if (unlikely(line < 0 || line >= MSM_UART_NR))
1796 return -ENXIO;
1797
1798 dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
1799
1800 port = msm_get_port_from_line(line);
1801 port->dev = &pdev->dev;
1802 msm_port = to_msm_port(port);
1803
1804 id = of_match_device(msm_uartdm_table, &pdev->dev);
1805 if (id)
1806 msm_port->is_uartdm = (unsigned long)id->data;
1807 else
1808 msm_port->is_uartdm = 0;
1809
1810 msm_port->clk = devm_clk_get(&pdev->dev, "core");
1811 if (IS_ERR(msm_port->clk))
1812 return PTR_ERR(msm_port->clk);
1813
1814 if (msm_port->is_uartdm) {
1815 msm_port->pclk = devm_clk_get(&pdev->dev, "iface");
1816 if (IS_ERR(msm_port->pclk))
1817 return PTR_ERR(msm_port->pclk);
1818 }
1819
1820 ret = devm_pm_opp_set_clkname(&pdev->dev, "core");
1821 if (ret)
1822 return ret;
1823
1824 /* OPP table is optional */
1825 ret = devm_pm_opp_of_add_table(&pdev->dev);
1826 if (ret && ret != -ENODEV)
1827 return dev_err_probe(&pdev->dev, ret, "invalid OPP table\n");
1828
1829 port->uartclk = clk_get_rate(msm_port->clk);
1830 dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk);
1831
1832 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1833 if (unlikely(!resource))
1834 return -ENXIO;
1835 port->mapbase = resource->start;
1836
1837 irq = platform_get_irq(pdev, 0);
1838 if (unlikely(irq < 0))
1839 return -ENXIO;
1840 port->irq = irq;
1841 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MSM_CONSOLE);
1842
1843 platform_set_drvdata(pdev, port);
1844
1845 return uart_add_one_port(&msm_uart_driver, port);
1846}
1847
1848static void msm_serial_remove(struct platform_device *pdev)
1849{
1850 struct uart_port *port = platform_get_drvdata(pdev);
1851
1852 uart_remove_one_port(&msm_uart_driver, port);
1853}
1854
1855static const struct of_device_id msm_match_table[] = {
1856 { .compatible = "qcom,msm-uart" },
1857 { .compatible = "qcom,msm-uartdm" },
1858 {}
1859};
1860MODULE_DEVICE_TABLE(of, msm_match_table);
1861
1862static int __maybe_unused msm_serial_suspend(struct device *dev)
1863{
1864 struct msm_port *port = dev_get_drvdata(dev);
1865
1866 uart_suspend_port(&msm_uart_driver, &port->uart);
1867
1868 return 0;
1869}
1870
1871static int __maybe_unused msm_serial_resume(struct device *dev)
1872{
1873 struct msm_port *port = dev_get_drvdata(dev);
1874
1875 uart_resume_port(&msm_uart_driver, &port->uart);
1876
1877 return 0;
1878}
1879
1880static const struct dev_pm_ops msm_serial_dev_pm_ops = {
1881 SET_SYSTEM_SLEEP_PM_OPS(msm_serial_suspend, msm_serial_resume)
1882};
1883
1884static struct platform_driver msm_platform_driver = {
1885 .remove_new = msm_serial_remove,
1886 .probe = msm_serial_probe,
1887 .driver = {
1888 .name = "msm_serial",
1889 .pm = &msm_serial_dev_pm_ops,
1890 .of_match_table = msm_match_table,
1891 },
1892};
1893
1894static int __init msm_serial_init(void)
1895{
1896 int ret;
1897
1898 ret = uart_register_driver(&msm_uart_driver);
1899 if (unlikely(ret))
1900 return ret;
1901
1902 ret = platform_driver_register(&msm_platform_driver);
1903 if (unlikely(ret))
1904 uart_unregister_driver(&msm_uart_driver);
1905
1906 pr_info("msm_serial: driver initialized\n");
1907
1908 return ret;
1909}
1910
1911static void __exit msm_serial_exit(void)
1912{
1913 platform_driver_unregister(&msm_platform_driver);
1914 uart_unregister_driver(&msm_uart_driver);
1915}
1916
1917module_init(msm_serial_init);
1918module_exit(msm_serial_exit);
1919
1920MODULE_AUTHOR("Robert Love <rlove@google.com>");
1921MODULE_DESCRIPTION("Driver for msm7x serial device");
1922MODULE_LICENSE("GPL");