Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2013 BayHub Technology Ltd.
4 *
5 * Authors: Peter Guo <peter.guo@bayhubtech.com>
6 * Adam Lee <adam.lee@canonical.com>
7 * Ernest Zhang <ernest.zhang@bayhubtech.com>
8 */
9
10#include <linux/pci.h>
11#include <linux/mmc/host.h>
12#include <linux/mmc/mmc.h>
13#include <linux/delay.h>
14#include <linux/iopoll.h>
15#include <linux/bitfield.h>
16
17#include "sdhci.h"
18#include "sdhci-pci.h"
19
20/*
21 * O2Micro device registers
22 */
23
24#define O2_SD_MISC_REG5 0x64
25#define O2_SD_LD0_CTRL 0x68
26#define O2_SD_DEV_CTRL 0x88
27#define O2_SD_LOCK_WP 0xD3
28#define O2_SD_TEST_REG 0xD4
29#define O2_SD_FUNC_REG0 0xDC
30#define O2_SD_MULTI_VCC3V 0xEE
31#define O2_SD_CLKREQ 0xEC
32#define O2_SD_CAPS 0xE0
33#define O2_SD_ADMA1 0xE2
34#define O2_SD_ADMA2 0xE7
35#define O2_SD_MISC_CTRL2 0xF0
36#define O2_SD_INF_MOD 0xF1
37#define O2_SD_MISC_CTRL4 0xFC
38#define O2_SD_MISC_CTRL 0x1C0
39#define O2_SD_PWR_FORCE_L0 0x0002
40#define O2_SD_TUNING_CTRL 0x300
41#define O2_SD_PLL_SETTING 0x304
42#define O2_SD_MISC_SETTING 0x308
43#define O2_SD_CLK_SETTING 0x328
44#define O2_SD_CAP_REG2 0x330
45#define O2_SD_CAP_REG0 0x334
46#define O2_SD_UHS1_CAP_SETTING 0x33C
47#define O2_SD_DELAY_CTRL 0x350
48#define O2_SD_OUTPUT_CLK_SOURCE_SWITCH 0x354
49#define O2_SD_UHS2_L1_CTRL 0x35C
50#define O2_SD_FUNC_REG3 0x3E0
51#define O2_SD_FUNC_REG4 0x3E4
52#define O2_SD_LED_ENABLE BIT(6)
53#define O2_SD_FREG0_LEDOFF BIT(13)
54#define O2_SD_SEL_DLL BIT(16)
55#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22)
56#define O2_SD_PHASE_MASK GENMASK(23, 20)
57#define O2_SD_FIX_PHASE FIELD_PREP(O2_SD_PHASE_MASK, 0x9)
58
59#define O2_SD_VENDOR_SETTING 0x110
60#define O2_SD_VENDOR_SETTING2 0x1C8
61#define O2_SD_HW_TUNING_DISABLE BIT(4)
62
63#define O2_PLL_DLL_WDT_CONTROL1 0x1CC
64#define O2_PLL_FORCE_ACTIVE BIT(18)
65#define O2_PLL_LOCK_STATUS BIT(14)
66#define O2_PLL_SOFT_RESET BIT(12)
67#define O2_DLL_LOCK_STATUS BIT(11)
68
69#define O2_SD_DETECT_SETTING 0x324
70
71static const u32 dmdn_table[] = {0x2B1C0000,
72 0x2C1A0000, 0x371B0000, 0x35100000};
73#define DMDN_SZ ARRAY_SIZE(dmdn_table)
74
75struct o2_host {
76 u8 dll_adjust_count;
77};
78
79static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
80{
81 ktime_t timeout;
82 u32 scratch32;
83
84 /* Wait max 50 ms */
85 timeout = ktime_add_ms(ktime_get(), 50);
86 while (1) {
87 bool timedout = ktime_after(ktime_get(), timeout);
88
89 scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
90 if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
91 == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
92 break;
93
94 if (timedout) {
95 pr_err("%s: Card Detect debounce never finished.\n",
96 mmc_hostname(host->mmc));
97 sdhci_dumpregs(host);
98 return;
99 }
100 udelay(10);
101 }
102}
103
104static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
105{
106 ktime_t timeout;
107 u16 scratch;
108 u32 scratch32;
109
110 /* PLL software reset */
111 scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
112 scratch32 |= O2_PLL_SOFT_RESET;
113 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
114 udelay(1);
115 scratch32 &= ~(O2_PLL_SOFT_RESET);
116 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
117
118 /* PLL force active */
119 scratch32 |= O2_PLL_FORCE_ACTIVE;
120 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
121
122 /* Wait max 20 ms */
123 timeout = ktime_add_ms(ktime_get(), 20);
124 while (1) {
125 bool timedout = ktime_after(ktime_get(), timeout);
126
127 scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
128 if (scratch & O2_PLL_LOCK_STATUS)
129 break;
130 if (timedout) {
131 pr_err("%s: Internal clock never stabilised.\n",
132 mmc_hostname(host->mmc));
133 sdhci_dumpregs(host);
134 goto out;
135 }
136 udelay(10);
137 }
138
139 /* Wait for card detect finish */
140 udelay(1);
141 sdhci_o2_wait_card_detect_stable(host);
142
143out:
144 /* Cancel PLL force active */
145 scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
146 scratch32 &= ~O2_PLL_FORCE_ACTIVE;
147 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
148}
149
150static int sdhci_o2_get_cd(struct mmc_host *mmc)
151{
152 struct sdhci_host *host = mmc_priv(mmc);
153
154 if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS))
155 sdhci_o2_enable_internal_clock(host);
156 else
157 sdhci_o2_wait_card_detect_stable(host);
158
159 return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
160}
161
162static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
163{
164 u32 scratch_32;
165
166 pci_read_config_dword(chip->pdev,
167 O2_SD_PLL_SETTING, &scratch_32);
168
169 scratch_32 &= 0x0000FFFF;
170 scratch_32 |= value;
171
172 pci_write_config_dword(chip->pdev,
173 O2_SD_PLL_SETTING, scratch_32);
174}
175
176static u32 sdhci_o2_pll_dll_wdt_control(struct sdhci_host *host)
177{
178 return sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
179}
180
181/*
182 * This function is used to detect dll lock status.
183 * Since the dll lock status bit will toggle randomly
184 * with very short interval which needs to be polled
185 * as fast as possible. Set sleep_us as 1 microsecond.
186 */
187static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host)
188{
189 u32 scratch32 = 0;
190
191 return readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
192 scratch32, !(scratch32 & O2_DLL_LOCK_STATUS), 1, 1000000);
193}
194
195static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
196{
197 u16 reg;
198
199 /* enable hardware tuning */
200 reg = sdhci_readw(host, O2_SD_VENDOR_SETTING);
201 reg &= ~O2_SD_HW_TUNING_DISABLE;
202 sdhci_writew(host, reg, O2_SD_VENDOR_SETTING);
203}
204
205static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode)
206{
207 int i;
208
209 sdhci_send_tuning(host, opcode);
210
211 for (i = 0; i < 150; i++) {
212 u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
213
214 if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
215 if (ctrl & SDHCI_CTRL_TUNED_CLK) {
216 host->tuning_done = true;
217 return;
218 }
219 pr_warn("%s: HW tuning failed !\n",
220 mmc_hostname(host->mmc));
221 break;
222 }
223
224 mdelay(1);
225 }
226
227 pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
228 mmc_hostname(host->mmc));
229 sdhci_reset_tuning(host);
230}
231
232/*
233 * This function is used to fix o2 dll shift issue.
234 * It isn't necessary to detect card present before recovery.
235 * Firstly, it is used by bht emmc card, which is embedded.
236 * Second, before call recovery card present will be detected
237 * outside of the execute tuning function.
238 */
239static int sdhci_o2_dll_recovery(struct sdhci_host *host)
240{
241 int ret = 0;
242 u8 scratch_8 = 0;
243 u32 scratch_32 = 0;
244 struct sdhci_pci_slot *slot = sdhci_priv(host);
245 struct sdhci_pci_chip *chip = slot->chip;
246 struct o2_host *o2_host = sdhci_pci_priv(slot);
247
248 /* UnLock WP */
249 pci_read_config_byte(chip->pdev,
250 O2_SD_LOCK_WP, &scratch_8);
251 scratch_8 &= 0x7f;
252 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
253 while (o2_host->dll_adjust_count < DMDN_SZ && !ret) {
254 /* Disable clock */
255 sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
256
257 /* PLL software reset */
258 scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
259 scratch_32 |= O2_PLL_SOFT_RESET;
260 sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1);
261
262 pci_read_config_dword(chip->pdev,
263 O2_SD_FUNC_REG4,
264 &scratch_32);
265 /* Enable Base Clk setting change */
266 scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
267 pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32);
268 o2_pci_set_baseclk(chip, dmdn_table[o2_host->dll_adjust_count]);
269
270 /* Enable internal clock */
271 scratch_8 = SDHCI_CLOCK_INT_EN;
272 sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL);
273
274 if (sdhci_o2_get_cd(host->mmc)) {
275 /*
276 * need wait at least 5ms for dll status stable,
277 * after enable internal clock
278 */
279 usleep_range(5000, 6000);
280 if (sdhci_o2_wait_dll_detect_lock(host)) {
281 scratch_8 |= SDHCI_CLOCK_CARD_EN;
282 sdhci_writeb(host, scratch_8,
283 SDHCI_CLOCK_CONTROL);
284 ret = 1;
285 } else {
286 pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n",
287 mmc_hostname(host->mmc),
288 o2_host->dll_adjust_count);
289 }
290 } else {
291 pr_err("%s: card present detect failed.\n",
292 mmc_hostname(host->mmc));
293 break;
294 }
295
296 o2_host->dll_adjust_count++;
297 }
298 if (!ret && o2_host->dll_adjust_count == DMDN_SZ)
299 pr_err("%s: DLL adjust over max times\n",
300 mmc_hostname(host->mmc));
301 /* Lock WP */
302 pci_read_config_byte(chip->pdev,
303 O2_SD_LOCK_WP, &scratch_8);
304 scratch_8 |= 0x80;
305 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
306 return ret;
307}
308
309static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
310{
311 struct sdhci_host *host = mmc_priv(mmc);
312 struct sdhci_pci_slot *slot = sdhci_priv(host);
313 struct sdhci_pci_chip *chip = slot->chip;
314 int current_bus_width = 0;
315 u32 scratch32 = 0;
316 u16 scratch = 0;
317 u8 scratch_8 = 0;
318 u32 reg_val;
319
320 /*
321 * This handler implements the hardware tuning that is specific to
322 * this controller. Fall back to the standard method for other TIMING.
323 */
324 if ((host->timing != MMC_TIMING_MMC_HS200) &&
325 (host->timing != MMC_TIMING_UHS_SDR104) &&
326 (host->timing != MMC_TIMING_UHS_SDR50))
327 return sdhci_execute_tuning(mmc, opcode);
328
329 if (WARN_ON(!mmc_op_tuning(opcode)))
330 return -EINVAL;
331
332 /* Force power mode enter L0 */
333 scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
334 scratch |= O2_SD_PWR_FORCE_L0;
335 sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
336
337 /* Stop clk */
338 reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
339 reg_val &= ~SDHCI_CLOCK_CARD_EN;
340 sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
341
342 /* UnLock WP */
343 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
344 scratch_8 &= 0x7f;
345 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
346
347 /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
348 pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, ®_val);
349 reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
350 reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
351 pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
352
353 /* Lock WP */
354 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
355 scratch_8 |= 0x80;
356 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
357
358 /* Start clk */
359 reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
360 reg_val |= SDHCI_CLOCK_CARD_EN;
361 sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
362
363 /* wait DLL lock, timeout value 5ms */
364 if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
365 scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000))
366 pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n",
367 mmc_hostname(host->mmc));
368 /*
369 * Judge the tuning reason, whether caused by dll shift
370 * If cause by dll shift, should call sdhci_o2_dll_recovery
371 */
372 if (!sdhci_o2_wait_dll_detect_lock(host))
373 if (!sdhci_o2_dll_recovery(host)) {
374 pr_err("%s: o2 dll recovery failed\n",
375 mmc_hostname(host->mmc));
376 return -EINVAL;
377 }
378 /*
379 * o2 sdhci host didn't support 8bit emmc tuning
380 */
381 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
382 current_bus_width = mmc->ios.bus_width;
383 mmc->ios.bus_width = MMC_BUS_WIDTH_4;
384 sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
385 }
386
387 sdhci_o2_set_tuning_mode(host);
388
389 sdhci_start_tuning(host);
390
391 __sdhci_o2_execute_tuning(host, opcode);
392
393 sdhci_end_tuning(host);
394
395 if (current_bus_width == MMC_BUS_WIDTH_8) {
396 mmc->ios.bus_width = MMC_BUS_WIDTH_8;
397 sdhci_set_bus_width(host, current_bus_width);
398 }
399
400 /* Cancel force power mode enter L0 */
401 scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
402 scratch &= ~(O2_SD_PWR_FORCE_L0);
403 sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
404
405 sdhci_reset(host, SDHCI_RESET_CMD);
406 sdhci_reset(host, SDHCI_RESET_DATA);
407
408 host->flags &= ~SDHCI_HS400_TUNING;
409 return 0;
410}
411
412static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
413{
414 int ret;
415 u32 scratch_32;
416
417 /* Set led of SD host function enable */
418 ret = pci_read_config_dword(chip->pdev,
419 O2_SD_FUNC_REG0, &scratch_32);
420 if (ret)
421 return;
422
423 scratch_32 &= ~O2_SD_FREG0_LEDOFF;
424 pci_write_config_dword(chip->pdev,
425 O2_SD_FUNC_REG0, scratch_32);
426
427 ret = pci_read_config_dword(chip->pdev,
428 O2_SD_TEST_REG, &scratch_32);
429 if (ret)
430 return;
431
432 scratch_32 |= O2_SD_LED_ENABLE;
433 pci_write_config_dword(chip->pdev,
434 O2_SD_TEST_REG, scratch_32);
435}
436
437static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
438{
439 u32 scratch_32;
440 int ret;
441 /* Improve write performance for SD3.0 */
442 ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
443 if (ret)
444 return;
445 scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
446 pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
447
448 /* Enable Link abnormal reset generating Reset */
449 ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
450 if (ret)
451 return;
452 scratch_32 &= ~((1 << 19) | (1 << 11));
453 scratch_32 |= (1 << 10);
454 pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
455
456 /* set card power over current protection */
457 ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
458 if (ret)
459 return;
460 scratch_32 |= (1 << 4);
461 pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
462
463 /* adjust the output delay for SD mode */
464 pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
465
466 /* Set the output voltage setting of Aux 1.2v LDO */
467 ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
468 if (ret)
469 return;
470 scratch_32 &= ~(3 << 12);
471 pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
472
473 /* Set Max power supply capability of SD host */
474 ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
475 if (ret)
476 return;
477 scratch_32 &= ~(0x01FE);
478 scratch_32 |= 0x00CC;
479 pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
480 /* Set DLL Tuning Window */
481 ret = pci_read_config_dword(chip->pdev,
482 O2_SD_TUNING_CTRL, &scratch_32);
483 if (ret)
484 return;
485 scratch_32 &= ~(0x000000FF);
486 scratch_32 |= 0x00000066;
487 pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
488
489 /* Set UHS2 T_EIDLE */
490 ret = pci_read_config_dword(chip->pdev,
491 O2_SD_UHS2_L1_CTRL, &scratch_32);
492 if (ret)
493 return;
494 scratch_32 &= ~(0x000000FC);
495 scratch_32 |= 0x00000084;
496 pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
497
498 /* Set UHS2 Termination */
499 ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
500 if (ret)
501 return;
502 scratch_32 &= ~((1 << 21) | (1 << 30));
503
504 pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
505
506 /* Set L1 Entrance Timer */
507 ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
508 if (ret)
509 return;
510 scratch_32 &= ~(0xf0000000);
511 scratch_32 |= 0x30000000;
512 pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
513
514 ret = pci_read_config_dword(chip->pdev,
515 O2_SD_MISC_CTRL4, &scratch_32);
516 if (ret)
517 return;
518 scratch_32 &= ~(0x000f0000);
519 scratch_32 |= 0x00080000;
520 pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
521}
522
523static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip,
524 struct sdhci_host *host)
525{
526 int ret;
527
528 ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI);
529 if (!ret) {
530 pr_info("%s: unsupported MSI, use INTx irq\n",
531 mmc_hostname(host->mmc));
532 return;
533 }
534
535 ret = pci_alloc_irq_vectors(chip->pdev, 1, 1,
536 PCI_IRQ_MSI | PCI_IRQ_MSIX);
537 if (ret < 0) {
538 pr_err("%s: enable PCI MSI failed, err=%d\n",
539 mmc_hostname(host->mmc), ret);
540 return;
541 }
542
543 host->irq = pci_irq_vector(chip->pdev, 0);
544}
545
546static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
547{
548 /* Enable internal clock */
549 clk |= SDHCI_CLOCK_INT_EN;
550 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
551
552 sdhci_o2_enable_internal_clock(host);
553 if (sdhci_o2_get_cd(host->mmc)) {
554 clk |= SDHCI_CLOCK_CARD_EN;
555 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
556 }
557}
558
559static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
560{
561 u16 clk;
562 u8 scratch;
563 u32 scratch_32;
564 struct sdhci_pci_slot *slot = sdhci_priv(host);
565 struct sdhci_pci_chip *chip = slot->chip;
566
567 host->mmc->actual_clock = 0;
568
569 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
570
571 if (clock == 0)
572 return;
573
574 /* UnLock WP */
575 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
576 scratch &= 0x7f;
577 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
578
579 if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
580 pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
581
582 if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
583 o2_pci_set_baseclk(chip, 0x2c280000);
584 } else {
585 pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
586
587 if ((scratch_32 & 0xFFFF0000) != 0x25100000)
588 o2_pci_set_baseclk(chip, 0x25100000);
589 }
590
591 pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
592 scratch_32 &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
593 pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
594
595 /* Lock WP */
596 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
597 scratch |= 0x80;
598 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
599
600 clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
601 sdhci_o2_enable_clk(host, clk);
602}
603
604static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
605{
606 struct sdhci_pci_chip *chip;
607 struct sdhci_host *host;
608 struct o2_host *o2_host = sdhci_pci_priv(slot);
609 u32 reg, caps;
610 int ret;
611
612 chip = slot->chip;
613 host = slot->host;
614
615 o2_host->dll_adjust_count = 0;
616 caps = sdhci_readl(host, SDHCI_CAPABILITIES);
617
618 /*
619 * mmc_select_bus_width() will test the bus to determine the actual bus
620 * width.
621 */
622 if (caps & SDHCI_CAN_DO_8BIT)
623 host->mmc->caps |= MMC_CAP_8_BIT_DATA;
624
625 switch (chip->pdev->device) {
626 case PCI_DEVICE_ID_O2_SDS0:
627 case PCI_DEVICE_ID_O2_SEABIRD0:
628 case PCI_DEVICE_ID_O2_SEABIRD1:
629 case PCI_DEVICE_ID_O2_SDS1:
630 case PCI_DEVICE_ID_O2_FUJIN2:
631 reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
632 if (reg & 0x1)
633 host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
634
635 host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
636
637 sdhci_pci_o2_enable_msi(chip, host);
638
639 if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
640 ret = pci_read_config_dword(chip->pdev,
641 O2_SD_MISC_SETTING, ®);
642 if (ret)
643 return -EIO;
644 if (reg & (1 << 4)) {
645 pr_info("%s: emmc 1.8v flag is set, force 1.8v signaling voltage\n",
646 mmc_hostname(host->mmc));
647 host->flags &= ~SDHCI_SIGNALING_330;
648 host->flags |= SDHCI_SIGNALING_180;
649 host->mmc->caps2 |= MMC_CAP2_NO_SD;
650 host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
651 pci_write_config_dword(chip->pdev,
652 O2_SD_DETECT_SETTING, 3);
653 }
654
655 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
656 }
657
658 if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD1) {
659 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
660 host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
661 host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
662 }
663
664 host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
665
666 if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
667 break;
668 /* set dll watch dog timer */
669 reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
670 reg |= (1 << 12);
671 sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
672
673 break;
674 default:
675 break;
676 }
677
678 return 0;
679}
680
681static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
682{
683 int ret;
684 u8 scratch;
685 u32 scratch_32;
686
687 switch (chip->pdev->device) {
688 case PCI_DEVICE_ID_O2_8220:
689 case PCI_DEVICE_ID_O2_8221:
690 case PCI_DEVICE_ID_O2_8320:
691 case PCI_DEVICE_ID_O2_8321:
692 /* This extra setup is required due to broken ADMA. */
693 ret = pci_read_config_byte(chip->pdev,
694 O2_SD_LOCK_WP, &scratch);
695 if (ret)
696 return ret;
697 scratch &= 0x7f;
698 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
699
700 /* Set Multi 3 to VCC3V# */
701 pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
702
703 /* Disable CLK_REQ# support after media DET */
704 ret = pci_read_config_byte(chip->pdev,
705 O2_SD_CLKREQ, &scratch);
706 if (ret)
707 return ret;
708 scratch |= 0x20;
709 pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
710
711 /* Choose capabilities, enable SDMA. We have to write 0x01
712 * to the capabilities register first to unlock it.
713 */
714 ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
715 if (ret)
716 return ret;
717 scratch |= 0x01;
718 pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
719 pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
720
721 /* Disable ADMA1/2 */
722 pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
723 pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
724
725 /* Disable the infinite transfer mode */
726 ret = pci_read_config_byte(chip->pdev,
727 O2_SD_INF_MOD, &scratch);
728 if (ret)
729 return ret;
730 scratch |= 0x08;
731 pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
732
733 /* Lock WP */
734 ret = pci_read_config_byte(chip->pdev,
735 O2_SD_LOCK_WP, &scratch);
736 if (ret)
737 return ret;
738 scratch |= 0x80;
739 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
740 break;
741 case PCI_DEVICE_ID_O2_SDS0:
742 case PCI_DEVICE_ID_O2_SDS1:
743 case PCI_DEVICE_ID_O2_FUJIN2:
744 /* UnLock WP */
745 ret = pci_read_config_byte(chip->pdev,
746 O2_SD_LOCK_WP, &scratch);
747 if (ret)
748 return ret;
749
750 scratch &= 0x7f;
751 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
752
753 /* DevId=8520 subId= 0x11 or 0x12 Type Chip support */
754 if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
755 ret = pci_read_config_dword(chip->pdev,
756 O2_SD_FUNC_REG0,
757 &scratch_32);
758 if (ret)
759 return ret;
760 scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
761
762 /* Check Whether subId is 0x11 or 0x12 */
763 if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
764 scratch_32 = 0x25100000;
765
766 o2_pci_set_baseclk(chip, scratch_32);
767 ret = pci_read_config_dword(chip->pdev,
768 O2_SD_FUNC_REG4,
769 &scratch_32);
770 if (ret)
771 return ret;
772
773 /* Enable Base Clk setting change */
774 scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
775 pci_write_config_dword(chip->pdev,
776 O2_SD_FUNC_REG4,
777 scratch_32);
778
779 /* Set Tuning Window to 4 */
780 pci_write_config_byte(chip->pdev,
781 O2_SD_TUNING_CTRL, 0x44);
782
783 break;
784 }
785 }
786
787 /* Enable 8520 led function */
788 o2_pci_led_enable(chip);
789
790 /* Set timeout CLK */
791 ret = pci_read_config_dword(chip->pdev,
792 O2_SD_CLK_SETTING, &scratch_32);
793 if (ret)
794 return ret;
795
796 scratch_32 &= ~(0xFF00);
797 scratch_32 |= 0x07E0C800;
798 pci_write_config_dword(chip->pdev,
799 O2_SD_CLK_SETTING, scratch_32);
800
801 ret = pci_read_config_dword(chip->pdev,
802 O2_SD_CLKREQ, &scratch_32);
803 if (ret)
804 return ret;
805 scratch_32 |= 0x3;
806 pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
807
808 ret = pci_read_config_dword(chip->pdev,
809 O2_SD_PLL_SETTING, &scratch_32);
810 if (ret)
811 return ret;
812
813 scratch_32 &= ~(0x1F3F070E);
814 scratch_32 |= 0x18270106;
815 pci_write_config_dword(chip->pdev,
816 O2_SD_PLL_SETTING, scratch_32);
817
818 /* Disable UHS1 funciton */
819 ret = pci_read_config_dword(chip->pdev,
820 O2_SD_CAP_REG2, &scratch_32);
821 if (ret)
822 return ret;
823 scratch_32 &= ~(0xE0);
824 pci_write_config_dword(chip->pdev,
825 O2_SD_CAP_REG2, scratch_32);
826
827 if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
828 sdhci_pci_o2_fujin2_pci_init(chip);
829
830 /* Lock WP */
831 ret = pci_read_config_byte(chip->pdev,
832 O2_SD_LOCK_WP, &scratch);
833 if (ret)
834 return ret;
835 scratch |= 0x80;
836 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
837 break;
838 case PCI_DEVICE_ID_O2_SEABIRD0:
839 case PCI_DEVICE_ID_O2_SEABIRD1:
840 /* UnLock WP */
841 ret = pci_read_config_byte(chip->pdev,
842 O2_SD_LOCK_WP, &scratch);
843 if (ret)
844 return ret;
845
846 scratch &= 0x7f;
847 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
848
849 ret = pci_read_config_dword(chip->pdev,
850 O2_SD_PLL_SETTING, &scratch_32);
851 if (ret)
852 return ret;
853
854 if ((scratch_32 & 0xff000000) == 0x01000000) {
855 scratch_32 &= 0x0000FFFF;
856 scratch_32 |= 0x1F340000;
857
858 pci_write_config_dword(chip->pdev,
859 O2_SD_PLL_SETTING, scratch_32);
860 } else {
861 scratch_32 &= 0x0000FFFF;
862 scratch_32 |= 0x25100000;
863
864 pci_write_config_dword(chip->pdev,
865 O2_SD_PLL_SETTING, scratch_32);
866
867 ret = pci_read_config_dword(chip->pdev,
868 O2_SD_FUNC_REG4,
869 &scratch_32);
870 if (ret)
871 return ret;
872 scratch_32 |= (1 << 22);
873 pci_write_config_dword(chip->pdev,
874 O2_SD_FUNC_REG4, scratch_32);
875 }
876
877 /* Set Tuning Windows to 5 */
878 pci_write_config_byte(chip->pdev,
879 O2_SD_TUNING_CTRL, 0x55);
880 //Adjust 1st and 2nd CD debounce time
881 pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32);
882 scratch_32 &= 0xFFE7FFFF;
883 scratch_32 |= 0x00180000;
884 pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
885 pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
886 /* Lock WP */
887 ret = pci_read_config_byte(chip->pdev,
888 O2_SD_LOCK_WP, &scratch);
889 if (ret)
890 return ret;
891 scratch |= 0x80;
892 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
893 break;
894 }
895
896 return 0;
897}
898
899#ifdef CONFIG_PM_SLEEP
900static int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
901{
902 sdhci_pci_o2_probe(chip);
903 return sdhci_pci_resume_host(chip);
904}
905#endif
906
907static const struct sdhci_ops sdhci_pci_o2_ops = {
908 .set_clock = sdhci_pci_o2_set_clock,
909 .enable_dma = sdhci_pci_enable_dma,
910 .set_bus_width = sdhci_set_bus_width,
911 .reset = sdhci_reset,
912 .set_uhs_signaling = sdhci_set_uhs_signaling,
913};
914
915const struct sdhci_pci_fixes sdhci_o2 = {
916 .probe = sdhci_pci_o2_probe,
917 .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
918 .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
919 .probe_slot = sdhci_pci_o2_probe_slot,
920#ifdef CONFIG_PM_SLEEP
921 .resume = sdhci_pci_o2_resume,
922#endif
923 .ops = &sdhci_pci_o2_ops,
924 .priv_size = sizeof(struct o2_host),
925};
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2013 BayHub Technology Ltd.
4 *
5 * Authors: Peter Guo <peter.guo@bayhubtech.com>
6 * Adam Lee <adam.lee@canonical.com>
7 * Ernest Zhang <ernest.zhang@bayhubtech.com>
8 */
9
10#include <linux/pci.h>
11#include <linux/mmc/host.h>
12#include <linux/mmc/mmc.h>
13#include <linux/delay.h>
14#include <linux/iopoll.h>
15#include <linux/bitfield.h>
16
17#include "sdhci.h"
18#include "sdhci-pci.h"
19
20/*
21 * O2Micro device registers
22 */
23
24#define O2_SD_PCIE_SWITCH 0x54
25#define O2_SD_MISC_REG5 0x64
26#define O2_SD_LD0_CTRL 0x68
27#define O2_SD_DEV_CTRL 0x88
28#define O2_SD_LOCK_WP 0xD3
29#define O2_SD_TEST_REG 0xD4
30#define O2_SD_FUNC_REG0 0xDC
31#define O2_SD_MULTI_VCC3V 0xEE
32#define O2_SD_CLKREQ 0xEC
33#define O2_SD_CAPS 0xE0
34#define O2_SD_ADMA1 0xE2
35#define O2_SD_ADMA2 0xE7
36#define O2_SD_MISC_CTRL2 0xF0
37#define O2_SD_INF_MOD 0xF1
38#define O2_SD_MISC_CTRL4 0xFC
39#define O2_SD_MISC_CTRL 0x1C0
40#define O2_SD_EXP_INT_REG 0x1E0
41#define O2_SD_PWR_FORCE_L0 0x0002
42#define O2_SD_TUNING_CTRL 0x300
43#define O2_SD_PLL_SETTING 0x304
44#define O2_SD_MISC_SETTING 0x308
45#define O2_SD_CLK_SETTING 0x328
46#define O2_SD_CAP_REG2 0x330
47#define O2_SD_CAP_REG0 0x334
48#define O2_SD_UHS1_CAP_SETTING 0x33C
49#define O2_SD_DELAY_CTRL 0x350
50#define O2_SD_OUTPUT_CLK_SOURCE_SWITCH 0x354
51#define O2_SD_UHS2_L1_CTRL 0x35C
52#define O2_SD_FUNC_REG3 0x3E0
53#define O2_SD_FUNC_REG4 0x3E4
54#define O2_SD_PARA_SET_REG1 0x444
55#define O2_SD_VDDX_CTRL_REG 0x508
56#define O2_SD_GPIO_CTRL_REG1 0x510
57#define O2_SD_LED_ENABLE BIT(6)
58#define O2_SD_FREG0_LEDOFF BIT(13)
59#define O2_SD_SEL_DLL BIT(16)
60#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22)
61#define O2_SD_PHASE_MASK GENMASK(23, 20)
62#define O2_SD_FIX_PHASE FIELD_PREP(O2_SD_PHASE_MASK, 0x9)
63
64#define O2_SD_VENDOR_SETTING 0x110
65#define O2_SD_VENDOR_SETTING2 0x1C8
66#define O2_SD_HW_TUNING_DISABLE BIT(4)
67
68#define O2_PLL_DLL_WDT_CONTROL1 0x1CC
69#define O2_PLL_FORCE_ACTIVE BIT(18)
70#define O2_PLL_LOCK_STATUS BIT(14)
71#define O2_PLL_SOFT_RESET BIT(12)
72#define O2_DLL_LOCK_STATUS BIT(11)
73
74#define O2_SD_DETECT_SETTING 0x324
75
76static const u32 dmdn_table[] = {0x2B1C0000,
77 0x2C1A0000, 0x371B0000, 0x35100000};
78#define DMDN_SZ ARRAY_SIZE(dmdn_table)
79
80struct o2_host {
81 u8 dll_adjust_count;
82};
83
84static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
85{
86 ktime_t timeout;
87 u32 scratch32;
88
89 /* Wait max 50 ms */
90 timeout = ktime_add_ms(ktime_get(), 50);
91 while (1) {
92 bool timedout = ktime_after(ktime_get(), timeout);
93
94 scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
95 if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
96 == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
97 break;
98
99 if (timedout) {
100 pr_err("%s: Card Detect debounce never finished.\n",
101 mmc_hostname(host->mmc));
102 sdhci_dumpregs(host);
103 return;
104 }
105 udelay(10);
106 }
107}
108
109static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
110{
111 ktime_t timeout;
112 u16 scratch;
113 u32 scratch32;
114
115 /* PLL software reset */
116 scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
117 scratch32 |= O2_PLL_SOFT_RESET;
118 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
119 udelay(1);
120 scratch32 &= ~(O2_PLL_SOFT_RESET);
121 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
122
123 /* PLL force active */
124 scratch32 |= O2_PLL_FORCE_ACTIVE;
125 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
126
127 /* Wait max 20 ms */
128 timeout = ktime_add_ms(ktime_get(), 20);
129 while (1) {
130 bool timedout = ktime_after(ktime_get(), timeout);
131
132 scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1);
133 if (scratch & O2_PLL_LOCK_STATUS)
134 break;
135 if (timedout) {
136 pr_err("%s: Internal clock never stabilised.\n",
137 mmc_hostname(host->mmc));
138 sdhci_dumpregs(host);
139 goto out;
140 }
141 udelay(10);
142 }
143
144 /* Wait for card detect finish */
145 udelay(1);
146 sdhci_o2_wait_card_detect_stable(host);
147
148out:
149 /* Cancel PLL force active */
150 scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
151 scratch32 &= ~O2_PLL_FORCE_ACTIVE;
152 sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1);
153}
154
155static int sdhci_o2_get_cd(struct mmc_host *mmc)
156{
157 struct sdhci_host *host = mmc_priv(mmc);
158
159 if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS))
160 sdhci_o2_enable_internal_clock(host);
161 else
162 sdhci_o2_wait_card_detect_stable(host);
163
164 return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
165}
166
167static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
168{
169 u32 scratch_32;
170
171 pci_read_config_dword(chip->pdev,
172 O2_SD_PLL_SETTING, &scratch_32);
173
174 scratch_32 &= 0x0000FFFF;
175 scratch_32 |= value;
176
177 pci_write_config_dword(chip->pdev,
178 O2_SD_PLL_SETTING, scratch_32);
179}
180
181static u32 sdhci_o2_pll_dll_wdt_control(struct sdhci_host *host)
182{
183 return sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
184}
185
186/*
187 * This function is used to detect dll lock status.
188 * Since the dll lock status bit will toggle randomly
189 * with very short interval which needs to be polled
190 * as fast as possible. Set sleep_us as 1 microsecond.
191 */
192static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host)
193{
194 u32 scratch32 = 0;
195
196 return readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
197 scratch32, !(scratch32 & O2_DLL_LOCK_STATUS), 1, 1000000);
198}
199
200static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
201{
202 u16 reg;
203
204 /* enable hardware tuning */
205 reg = sdhci_readw(host, O2_SD_VENDOR_SETTING);
206 reg &= ~O2_SD_HW_TUNING_DISABLE;
207 sdhci_writew(host, reg, O2_SD_VENDOR_SETTING);
208}
209
210static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode)
211{
212 int i;
213
214 sdhci_send_tuning(host, opcode);
215
216 for (i = 0; i < 150; i++) {
217 u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
218
219 if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
220 if (ctrl & SDHCI_CTRL_TUNED_CLK) {
221 host->tuning_done = true;
222 return;
223 }
224 pr_warn("%s: HW tuning failed !\n",
225 mmc_hostname(host->mmc));
226 break;
227 }
228
229 mdelay(1);
230 }
231
232 pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
233 mmc_hostname(host->mmc));
234 sdhci_reset_tuning(host);
235}
236
237/*
238 * This function is used to fix o2 dll shift issue.
239 * It isn't necessary to detect card present before recovery.
240 * Firstly, it is used by bht emmc card, which is embedded.
241 * Second, before call recovery card present will be detected
242 * outside of the execute tuning function.
243 */
244static int sdhci_o2_dll_recovery(struct sdhci_host *host)
245{
246 int ret = 0;
247 u8 scratch_8 = 0;
248 u32 scratch_32 = 0;
249 struct sdhci_pci_slot *slot = sdhci_priv(host);
250 struct sdhci_pci_chip *chip = slot->chip;
251 struct o2_host *o2_host = sdhci_pci_priv(slot);
252
253 /* UnLock WP */
254 pci_read_config_byte(chip->pdev,
255 O2_SD_LOCK_WP, &scratch_8);
256 scratch_8 &= 0x7f;
257 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
258 while (o2_host->dll_adjust_count < DMDN_SZ && !ret) {
259 /* Disable clock */
260 sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
261
262 /* PLL software reset */
263 scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1);
264 scratch_32 |= O2_PLL_SOFT_RESET;
265 sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1);
266
267 pci_read_config_dword(chip->pdev,
268 O2_SD_FUNC_REG4,
269 &scratch_32);
270 /* Enable Base Clk setting change */
271 scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
272 pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32);
273 o2_pci_set_baseclk(chip, dmdn_table[o2_host->dll_adjust_count]);
274
275 /* Enable internal clock */
276 scratch_8 = SDHCI_CLOCK_INT_EN;
277 sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL);
278
279 if (sdhci_o2_get_cd(host->mmc)) {
280 /*
281 * need wait at least 5ms for dll status stable,
282 * after enable internal clock
283 */
284 usleep_range(5000, 6000);
285 if (sdhci_o2_wait_dll_detect_lock(host)) {
286 scratch_8 |= SDHCI_CLOCK_CARD_EN;
287 sdhci_writeb(host, scratch_8,
288 SDHCI_CLOCK_CONTROL);
289 ret = 1;
290 } else {
291 pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n",
292 mmc_hostname(host->mmc),
293 o2_host->dll_adjust_count);
294 }
295 } else {
296 pr_err("%s: card present detect failed.\n",
297 mmc_hostname(host->mmc));
298 break;
299 }
300
301 o2_host->dll_adjust_count++;
302 }
303 if (!ret && o2_host->dll_adjust_count == DMDN_SZ)
304 pr_err("%s: DLL adjust over max times\n",
305 mmc_hostname(host->mmc));
306 /* Lock WP */
307 pci_read_config_byte(chip->pdev,
308 O2_SD_LOCK_WP, &scratch_8);
309 scratch_8 |= 0x80;
310 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
311 return ret;
312}
313
314static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
315{
316 struct sdhci_host *host = mmc_priv(mmc);
317 struct sdhci_pci_slot *slot = sdhci_priv(host);
318 struct sdhci_pci_chip *chip = slot->chip;
319 int current_bus_width = 0;
320 u32 scratch32 = 0;
321 u16 scratch = 0;
322 u8 scratch_8 = 0;
323 u32 reg_val;
324
325 /*
326 * This handler implements the hardware tuning that is specific to
327 * this controller. Fall back to the standard method for other TIMING.
328 */
329 if ((host->timing != MMC_TIMING_MMC_HS200) &&
330 (host->timing != MMC_TIMING_UHS_SDR104) &&
331 (host->timing != MMC_TIMING_UHS_SDR50))
332 return sdhci_execute_tuning(mmc, opcode);
333
334 if (WARN_ON(!mmc_op_tuning(opcode)))
335 return -EINVAL;
336
337 /* Force power mode enter L0 */
338 scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
339 scratch |= O2_SD_PWR_FORCE_L0;
340 sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
341
342 /* Update output phase */
343 switch (chip->pdev->device) {
344 case PCI_DEVICE_ID_O2_SDS0:
345 case PCI_DEVICE_ID_O2_SEABIRD0:
346 case PCI_DEVICE_ID_O2_SEABIRD1:
347 case PCI_DEVICE_ID_O2_SDS1:
348 case PCI_DEVICE_ID_O2_FUJIN2:
349 /* Stop clk */
350 reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
351 reg_val &= ~SDHCI_CLOCK_CARD_EN;
352 sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
353
354 if (host->timing == MMC_TIMING_MMC_HS200 ||
355 host->timing == MMC_TIMING_UHS_SDR104) {
356 /* UnLock WP */
357 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
358 scratch_8 &= 0x7f;
359 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
360
361 /* Set pcr 0x354[16] to choose dll clock, and set the default phase */
362 pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, ®_val);
363 reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
364 reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE);
365 pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val);
366
367 /* Lock WP */
368 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
369 scratch_8 |= 0x80;
370 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
371 }
372
373 /* Start clk */
374 reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
375 reg_val |= SDHCI_CLOCK_CARD_EN;
376 sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL);
377 break;
378 default:
379 break;
380 }
381
382 /* wait DLL lock, timeout value 5ms */
383 if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host,
384 scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000))
385 pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n",
386 mmc_hostname(host->mmc));
387 /*
388 * Judge the tuning reason, whether caused by dll shift
389 * If cause by dll shift, should call sdhci_o2_dll_recovery
390 */
391 if (!sdhci_o2_wait_dll_detect_lock(host))
392 if (!sdhci_o2_dll_recovery(host)) {
393 pr_err("%s: o2 dll recovery failed\n",
394 mmc_hostname(host->mmc));
395 return -EINVAL;
396 }
397 /*
398 * o2 sdhci host didn't support 8bit emmc tuning
399 */
400 if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
401 current_bus_width = mmc->ios.bus_width;
402 mmc->ios.bus_width = MMC_BUS_WIDTH_4;
403 sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
404 }
405
406 sdhci_o2_set_tuning_mode(host);
407
408 sdhci_start_tuning(host);
409
410 __sdhci_o2_execute_tuning(host, opcode);
411
412 sdhci_end_tuning(host);
413
414 if (current_bus_width == MMC_BUS_WIDTH_8) {
415 mmc->ios.bus_width = MMC_BUS_WIDTH_8;
416 sdhci_set_bus_width(host, current_bus_width);
417 }
418
419 /* Cancel force power mode enter L0 */
420 scratch = sdhci_readw(host, O2_SD_MISC_CTRL);
421 scratch &= ~(O2_SD_PWR_FORCE_L0);
422 sdhci_writew(host, scratch, O2_SD_MISC_CTRL);
423
424 sdhci_reset(host, SDHCI_RESET_CMD);
425 sdhci_reset(host, SDHCI_RESET_DATA);
426
427 host->flags &= ~SDHCI_HS400_TUNING;
428 return 0;
429}
430
431static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
432{
433 int ret;
434 u32 scratch_32;
435
436 /* Set led of SD host function enable */
437 ret = pci_read_config_dword(chip->pdev,
438 O2_SD_FUNC_REG0, &scratch_32);
439 if (ret)
440 return;
441
442 scratch_32 &= ~O2_SD_FREG0_LEDOFF;
443 pci_write_config_dword(chip->pdev,
444 O2_SD_FUNC_REG0, scratch_32);
445
446 ret = pci_read_config_dword(chip->pdev,
447 O2_SD_TEST_REG, &scratch_32);
448 if (ret)
449 return;
450
451 scratch_32 |= O2_SD_LED_ENABLE;
452 pci_write_config_dword(chip->pdev,
453 O2_SD_TEST_REG, scratch_32);
454}
455
456static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
457{
458 u32 scratch_32;
459 int ret;
460 /* Improve write performance for SD3.0 */
461 ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
462 if (ret)
463 return;
464 scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
465 pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
466
467 /* Enable Link abnormal reset generating Reset */
468 ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
469 if (ret)
470 return;
471 scratch_32 &= ~((1 << 19) | (1 << 11));
472 scratch_32 |= (1 << 10);
473 pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
474
475 /* set card power over current protection */
476 ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
477 if (ret)
478 return;
479 scratch_32 |= (1 << 4);
480 pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
481
482 /* adjust the output delay for SD mode */
483 pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
484
485 /* Set the output voltage setting of Aux 1.2v LDO */
486 ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
487 if (ret)
488 return;
489 scratch_32 &= ~(3 << 12);
490 pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
491
492 /* Set Max power supply capability of SD host */
493 ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
494 if (ret)
495 return;
496 scratch_32 &= ~(0x01FE);
497 scratch_32 |= 0x00CC;
498 pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
499 /* Set DLL Tuning Window */
500 ret = pci_read_config_dword(chip->pdev,
501 O2_SD_TUNING_CTRL, &scratch_32);
502 if (ret)
503 return;
504 scratch_32 &= ~(0x000000FF);
505 scratch_32 |= 0x00000066;
506 pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
507
508 /* Set UHS2 T_EIDLE */
509 ret = pci_read_config_dword(chip->pdev,
510 O2_SD_UHS2_L1_CTRL, &scratch_32);
511 if (ret)
512 return;
513 scratch_32 &= ~(0x000000FC);
514 scratch_32 |= 0x00000084;
515 pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
516
517 /* Set UHS2 Termination */
518 ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
519 if (ret)
520 return;
521 scratch_32 &= ~((1 << 21) | (1 << 30));
522
523 pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
524
525 /* Set L1 Entrance Timer */
526 ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
527 if (ret)
528 return;
529 scratch_32 &= ~(0xf0000000);
530 scratch_32 |= 0x30000000;
531 pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
532
533 ret = pci_read_config_dword(chip->pdev,
534 O2_SD_MISC_CTRL4, &scratch_32);
535 if (ret)
536 return;
537 scratch_32 &= ~(0x000f0000);
538 scratch_32 |= 0x00080000;
539 pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
540}
541
542static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip,
543 struct sdhci_host *host)
544{
545 int ret;
546
547 ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI);
548 if (!ret) {
549 pr_info("%s: unsupported MSI, use INTx irq\n",
550 mmc_hostname(host->mmc));
551 return;
552 }
553
554 ret = pci_alloc_irq_vectors(chip->pdev, 1, 1,
555 PCI_IRQ_MSI | PCI_IRQ_MSIX);
556 if (ret < 0) {
557 pr_err("%s: enable PCI MSI failed, err=%d\n",
558 mmc_hostname(host->mmc), ret);
559 return;
560 }
561
562 host->irq = pci_irq_vector(chip->pdev, 0);
563}
564
565static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
566{
567 /* Enable internal clock */
568 clk |= SDHCI_CLOCK_INT_EN;
569 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
570
571 sdhci_o2_enable_internal_clock(host);
572 if (sdhci_o2_get_cd(host->mmc)) {
573 clk |= SDHCI_CLOCK_CARD_EN;
574 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
575 }
576}
577
578static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
579{
580 u16 clk;
581 u8 scratch;
582 u32 scratch_32;
583 u32 dmdn_208m, dmdn_200m;
584 struct sdhci_pci_slot *slot = sdhci_priv(host);
585 struct sdhci_pci_chip *chip = slot->chip;
586
587 host->mmc->actual_clock = 0;
588
589 sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
590
591 if (clock == 0)
592 return;
593
594 /* UnLock WP */
595 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
596 scratch &= 0x7f;
597 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
598
599 if (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9860 ||
600 chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9861 ||
601 chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9862 ||
602 chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9863) {
603 dmdn_208m = 0x2c500000;
604 dmdn_200m = 0x25200000;
605 } else {
606 dmdn_208m = 0x2c280000;
607 dmdn_200m = 0x25100000;
608 }
609
610 if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
611 pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
612
613 if ((scratch_32 & 0xFFFF0000) != dmdn_208m)
614 o2_pci_set_baseclk(chip, dmdn_208m);
615 } else {
616 pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
617
618 if ((scratch_32 & 0xFFFF0000) != dmdn_200m)
619 o2_pci_set_baseclk(chip, dmdn_200m);
620 }
621
622 pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
623 scratch_32 &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK);
624 pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
625
626 /* Lock WP */
627 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
628 scratch |= 0x80;
629 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
630
631 clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
632 sdhci_o2_enable_clk(host, clk);
633}
634
635static int sdhci_pci_o2_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
636{
637 struct sdhci_host *host = mmc_priv(mmc);
638 struct sdhci_pci_slot *slot = sdhci_priv(host);
639 struct sdhci_pci_chip *chip = slot->chip;
640 u8 scratch8;
641 u16 scratch16;
642 int ret;
643
644 /* Disable clock */
645 sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL);
646
647 /* Set VDD2 voltage*/
648 scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
649 scratch8 &= 0x0F;
650 if (host->mmc->ios.timing == MMC_TIMING_SD_EXP_1_2V &&
651 host->mmc->caps2 & MMC_CAP2_SD_EXP_1_2V) {
652 scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_120;
653 } else {
654 scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_180;
655 }
656
657 sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
658
659 /* UnLock WP */
660 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
661 scratch8 &= 0x7f;
662 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
663
664 /* Wait for express card clkreqn assert */
665 ret = read_poll_timeout(sdhci_readb, scratch8, !(scratch8 & BIT(0)),
666 1, 30000, false, host, O2_SD_EXP_INT_REG);
667
668 if (!ret) {
669 /* Switch to PCIe mode */
670 scratch16 = sdhci_readw(host, O2_SD_PCIE_SWITCH);
671 scratch16 |= BIT(8);
672 sdhci_writew(host, scratch16, O2_SD_PCIE_SWITCH);
673 } else {
674 /* Power off VDD2 voltage*/
675 scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL);
676 scratch8 &= 0x0F;
677 sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL);
678
679 /* Keep mode as UHSI */
680 pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16);
681 scratch16 &= ~BIT(11);
682 pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16);
683
684 host->mmc->ios.timing = MMC_TIMING_LEGACY;
685 pr_info("%s: Express card initialization failed, falling back to Legacy\n",
686 mmc_hostname(host->mmc));
687 }
688 /* Lock WP */
689 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8);
690 scratch8 |= 0x80;
691 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8);
692
693 return 0;
694}
695
696static void sdhci_pci_o2_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd)
697{
698 struct sdhci_pci_chip *chip;
699 struct sdhci_pci_slot *slot = sdhci_priv(host);
700 u32 scratch_32 = 0;
701 u8 scratch_8 = 0;
702
703 chip = slot->chip;
704
705 if (mode == MMC_POWER_OFF) {
706 /* UnLock WP */
707 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
708 scratch_8 &= 0x7f;
709 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
710
711 /* Set PCR 0x354[16] to switch Clock Source back to OPE Clock */
712 pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
713 scratch_32 &= ~(O2_SD_SEL_DLL);
714 pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
715
716 /* Lock WP */
717 pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8);
718 scratch_8 |= 0x80;
719 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8);
720 }
721
722 sdhci_set_power(host, mode, vdd);
723}
724
725static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
726{
727 struct sdhci_pci_chip *chip;
728 struct sdhci_host *host;
729 struct o2_host *o2_host = sdhci_pci_priv(slot);
730 u32 reg, caps;
731 int ret;
732
733 chip = slot->chip;
734 host = slot->host;
735
736 o2_host->dll_adjust_count = 0;
737 caps = sdhci_readl(host, SDHCI_CAPABILITIES);
738
739 /*
740 * mmc_select_bus_width() will test the bus to determine the actual bus
741 * width.
742 */
743 if (caps & SDHCI_CAN_DO_8BIT)
744 host->mmc->caps |= MMC_CAP_8_BIT_DATA;
745
746 host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50;
747
748 sdhci_pci_o2_enable_msi(chip, host);
749
750 host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;
751 switch (chip->pdev->device) {
752 case PCI_DEVICE_ID_O2_SDS0:
753 case PCI_DEVICE_ID_O2_SEABIRD0:
754 case PCI_DEVICE_ID_O2_SEABIRD1:
755 case PCI_DEVICE_ID_O2_SDS1:
756 case PCI_DEVICE_ID_O2_FUJIN2:
757 reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
758 if (reg & 0x1)
759 host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
760
761 if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
762 ret = pci_read_config_dword(chip->pdev,
763 O2_SD_MISC_SETTING, ®);
764 if (ret)
765 return -EIO;
766 if (reg & (1 << 4)) {
767 pr_info("%s: emmc 1.8v flag is set, force 1.8v signaling voltage\n",
768 mmc_hostname(host->mmc));
769 host->flags &= ~SDHCI_SIGNALING_330;
770 host->flags |= SDHCI_SIGNALING_180;
771 host->mmc->caps2 |= MMC_CAP2_NO_SD;
772 host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
773 pci_write_config_dword(chip->pdev,
774 O2_SD_DETECT_SETTING, 3);
775 }
776
777 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
778 }
779
780 if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD1) {
781 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
782 host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
783 host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
784 }
785
786 if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
787 break;
788 /* set dll watch dog timer */
789 reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
790 reg |= (1 << 12);
791 sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
792 break;
793 case PCI_DEVICE_ID_O2_GG8_9860:
794 case PCI_DEVICE_ID_O2_GG8_9861:
795 case PCI_DEVICE_ID_O2_GG8_9862:
796 case PCI_DEVICE_ID_O2_GG8_9863:
797 host->mmc->caps2 |= MMC_CAP2_NO_SDIO | MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V;
798 host->mmc->caps |= MMC_CAP_HW_RESET;
799 host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
800 slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
801 host->mmc_host_ops.init_sd_express = sdhci_pci_o2_init_sd_express;
802 break;
803 default:
804 break;
805 }
806
807 return 0;
808}
809
810static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
811{
812 int ret;
813 u8 scratch;
814 u16 scratch16;
815 u32 scratch_32;
816
817 switch (chip->pdev->device) {
818 case PCI_DEVICE_ID_O2_8220:
819 case PCI_DEVICE_ID_O2_8221:
820 case PCI_DEVICE_ID_O2_8320:
821 case PCI_DEVICE_ID_O2_8321:
822 /* This extra setup is required due to broken ADMA. */
823 ret = pci_read_config_byte(chip->pdev,
824 O2_SD_LOCK_WP, &scratch);
825 if (ret)
826 return ret;
827 scratch &= 0x7f;
828 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
829
830 /* Set Multi 3 to VCC3V# */
831 pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
832
833 /* Disable CLK_REQ# support after media DET */
834 ret = pci_read_config_byte(chip->pdev,
835 O2_SD_CLKREQ, &scratch);
836 if (ret)
837 return ret;
838 scratch |= 0x20;
839 pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
840
841 /* Choose capabilities, enable SDMA. We have to write 0x01
842 * to the capabilities register first to unlock it.
843 */
844 ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
845 if (ret)
846 return ret;
847 scratch |= 0x01;
848 pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
849 pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
850
851 /* Disable ADMA1/2 */
852 pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
853 pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
854
855 /* Disable the infinite transfer mode */
856 ret = pci_read_config_byte(chip->pdev,
857 O2_SD_INF_MOD, &scratch);
858 if (ret)
859 return ret;
860 scratch |= 0x08;
861 pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
862
863 /* Lock WP */
864 ret = pci_read_config_byte(chip->pdev,
865 O2_SD_LOCK_WP, &scratch);
866 if (ret)
867 return ret;
868 scratch |= 0x80;
869 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
870 break;
871 case PCI_DEVICE_ID_O2_SDS0:
872 case PCI_DEVICE_ID_O2_SDS1:
873 case PCI_DEVICE_ID_O2_FUJIN2:
874 /* UnLock WP */
875 ret = pci_read_config_byte(chip->pdev,
876 O2_SD_LOCK_WP, &scratch);
877 if (ret)
878 return ret;
879
880 scratch &= 0x7f;
881 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
882
883 /* DevId=8520 subId= 0x11 or 0x12 Type Chip support */
884 if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
885 ret = pci_read_config_dword(chip->pdev,
886 O2_SD_FUNC_REG0,
887 &scratch_32);
888 if (ret)
889 return ret;
890 scratch_32 = ((scratch_32 & 0xFF000000) >> 24);
891
892 /* Check Whether subId is 0x11 or 0x12 */
893 if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
894 scratch_32 = 0x25100000;
895
896 o2_pci_set_baseclk(chip, scratch_32);
897 ret = pci_read_config_dword(chip->pdev,
898 O2_SD_FUNC_REG4,
899 &scratch_32);
900 if (ret)
901 return ret;
902
903 /* Enable Base Clk setting change */
904 scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
905 pci_write_config_dword(chip->pdev,
906 O2_SD_FUNC_REG4,
907 scratch_32);
908
909 /* Set Tuning Window to 4 */
910 pci_write_config_byte(chip->pdev,
911 O2_SD_TUNING_CTRL, 0x44);
912
913 break;
914 }
915 }
916
917 /* Enable 8520 led function */
918 o2_pci_led_enable(chip);
919
920 /* Set timeout CLK */
921 ret = pci_read_config_dword(chip->pdev,
922 O2_SD_CLK_SETTING, &scratch_32);
923 if (ret)
924 return ret;
925
926 scratch_32 &= ~(0xFF00);
927 scratch_32 |= 0x07E0C800;
928 pci_write_config_dword(chip->pdev,
929 O2_SD_CLK_SETTING, scratch_32);
930
931 ret = pci_read_config_dword(chip->pdev,
932 O2_SD_CLKREQ, &scratch_32);
933 if (ret)
934 return ret;
935 scratch_32 |= 0x3;
936 pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
937
938 ret = pci_read_config_dword(chip->pdev,
939 O2_SD_PLL_SETTING, &scratch_32);
940 if (ret)
941 return ret;
942
943 scratch_32 &= ~(0x1F3F070E);
944 scratch_32 |= 0x18270106;
945 pci_write_config_dword(chip->pdev,
946 O2_SD_PLL_SETTING, scratch_32);
947
948 /* Disable UHS1 funciton */
949 ret = pci_read_config_dword(chip->pdev,
950 O2_SD_CAP_REG2, &scratch_32);
951 if (ret)
952 return ret;
953 scratch_32 &= ~(0xE0);
954 pci_write_config_dword(chip->pdev,
955 O2_SD_CAP_REG2, scratch_32);
956
957 if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
958 sdhci_pci_o2_fujin2_pci_init(chip);
959
960 /* Lock WP */
961 ret = pci_read_config_byte(chip->pdev,
962 O2_SD_LOCK_WP, &scratch);
963 if (ret)
964 return ret;
965 scratch |= 0x80;
966 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
967 break;
968 case PCI_DEVICE_ID_O2_SEABIRD0:
969 case PCI_DEVICE_ID_O2_SEABIRD1:
970 /* UnLock WP */
971 ret = pci_read_config_byte(chip->pdev,
972 O2_SD_LOCK_WP, &scratch);
973 if (ret)
974 return ret;
975
976 scratch &= 0x7f;
977 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
978
979 ret = pci_read_config_dword(chip->pdev,
980 O2_SD_PLL_SETTING, &scratch_32);
981 if (ret)
982 return ret;
983
984 if ((scratch_32 & 0xff000000) == 0x01000000) {
985 scratch_32 &= 0x0000FFFF;
986 scratch_32 |= 0x1F340000;
987
988 pci_write_config_dword(chip->pdev,
989 O2_SD_PLL_SETTING, scratch_32);
990 } else {
991 scratch_32 &= 0x0000FFFF;
992 scratch_32 |= 0x25100000;
993
994 pci_write_config_dword(chip->pdev,
995 O2_SD_PLL_SETTING, scratch_32);
996
997 ret = pci_read_config_dword(chip->pdev,
998 O2_SD_FUNC_REG4,
999 &scratch_32);
1000 if (ret)
1001 return ret;
1002 scratch_32 |= (1 << 22);
1003 pci_write_config_dword(chip->pdev,
1004 O2_SD_FUNC_REG4, scratch_32);
1005 }
1006
1007 /* Set Tuning Windows to 5 */
1008 pci_write_config_byte(chip->pdev,
1009 O2_SD_TUNING_CTRL, 0x55);
1010 //Adjust 1st and 2nd CD debounce time
1011 pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32);
1012 scratch_32 &= 0xFFE7FFFF;
1013 scratch_32 |= 0x00180000;
1014 pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
1015 pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
1016 /* Lock WP */
1017 ret = pci_read_config_byte(chip->pdev,
1018 O2_SD_LOCK_WP, &scratch);
1019 if (ret)
1020 return ret;
1021 scratch |= 0x80;
1022 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
1023 break;
1024 case PCI_DEVICE_ID_O2_GG8_9860:
1025 case PCI_DEVICE_ID_O2_GG8_9861:
1026 case PCI_DEVICE_ID_O2_GG8_9862:
1027 case PCI_DEVICE_ID_O2_GG8_9863:
1028 /* UnLock WP */
1029 ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
1030 if (ret)
1031 return ret;
1032 scratch &= 0x7f;
1033 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
1034
1035 /* Select mode switch source as software control */
1036 pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16);
1037 scratch16 &= 0xF8FF;
1038 scratch16 |= BIT(9);
1039 pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16);
1040
1041 /* set VDD1 supply source */
1042 pci_read_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, &scratch16);
1043 scratch16 &= 0xFFE3;
1044 scratch16 |= BIT(3);
1045 pci_write_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, scratch16);
1046
1047 /* Set host drive strength*/
1048 scratch16 = 0x0025;
1049 pci_write_config_word(chip->pdev, O2_SD_PLL_SETTING, scratch16);
1050
1051 /* Set output delay*/
1052 pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
1053 scratch_32 &= 0xFF0FFF00;
1054 scratch_32 |= 0x00B0003B;
1055 pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32);
1056
1057 /* Lock WP */
1058 ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
1059 if (ret)
1060 return ret;
1061 scratch |= 0x80;
1062 pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
1063 break;
1064 }
1065
1066 return 0;
1067}
1068
1069#ifdef CONFIG_PM_SLEEP
1070static int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
1071{
1072 sdhci_pci_o2_probe(chip);
1073 return sdhci_pci_resume_host(chip);
1074}
1075#endif
1076
1077static const struct sdhci_ops sdhci_pci_o2_ops = {
1078 .set_clock = sdhci_pci_o2_set_clock,
1079 .enable_dma = sdhci_pci_enable_dma,
1080 .set_bus_width = sdhci_set_bus_width,
1081 .reset = sdhci_reset,
1082 .set_uhs_signaling = sdhci_set_uhs_signaling,
1083 .set_power = sdhci_pci_o2_set_power,
1084};
1085
1086const struct sdhci_pci_fixes sdhci_o2 = {
1087 .probe = sdhci_pci_o2_probe,
1088 .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
1089 .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
1090 .probe_slot = sdhci_pci_o2_probe_slot,
1091#ifdef CONFIG_PM_SLEEP
1092 .resume = sdhci_pci_o2_resume,
1093#endif
1094 .ops = &sdhci_pci_o2_ops,
1095 .priv_size = sizeof(struct o2_host),
1096};