Linux Audio

Check our new training course

Loading...
v6.2
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 *	Copyright (C) 2014 Linaro Ltd.
  4 *	Author:	Ashwin Chaugule <ashwin.chaugule@linaro.org>
  5 *
  6 *  PCC (Platform Communication Channel) is defined in the ACPI 5.0+
  7 *  specification. It is a mailbox like mechanism to allow clients
  8 *  such as CPPC (Collaborative Processor Performance Control), RAS
  9 *  (Reliability, Availability and Serviceability) and MPST (Memory
 10 *  Node Power State Table) to talk to the platform (e.g. BMC) through
 11 *  shared memory regions as defined in the PCC table entries. The PCC
 12 *  specification supports a Doorbell mechanism for the PCC clients
 13 *  to notify the platform about new data. This Doorbell information
 14 *  is also specified in each PCC table entry.
 15 *
 16 *  Typical high level flow of operation is:
 17 *
 18 *  PCC Reads:
 19 *  * Client tries to acquire a channel lock.
 20 *  * After it is acquired it writes READ cmd in communication region cmd
 21 *		address.
 22 *  * Client issues mbox_send_message() which rings the PCC doorbell
 23 *		for its PCC channel.
 24 *  * If command completes, then client has control over channel and
 25 *		it can proceed with its reads.
 26 *  * Client releases lock.
 27 *
 28 *  PCC Writes:
 29 *  * Client tries to acquire channel lock.
 30 *  * Client writes to its communication region after it acquires a
 31 *		channel lock.
 32 *  * Client writes WRITE cmd in communication region cmd address.
 33 *  * Client issues mbox_send_message() which rings the PCC doorbell
 34 *		for its PCC channel.
 35 *  * If command completes, then writes have succeeded and it can release
 36 *		the channel lock.
 37 *
 38 *  There is a Nominal latency defined for each channel which indicates
 39 *  how long to wait until a command completes. If command is not complete
 40 *  the client needs to retry or assume failure.
 41 *
 42 *	For more details about PCC, please see the ACPI specification from
 43 *  http://www.uefi.org/ACPIv5.1 Section 14.
 44 *
 45 *  This file implements PCC as a Mailbox controller and allows for PCC
 46 *  clients to be implemented as its Mailbox Client Channels.
 47 */
 48
 49#include <linux/acpi.h>
 50#include <linux/delay.h>
 51#include <linux/io.h>
 52#include <linux/init.h>
 53#include <linux/interrupt.h>
 54#include <linux/list.h>
 55#include <linux/log2.h>
 56#include <linux/platform_device.h>
 57#include <linux/mailbox_controller.h>
 58#include <linux/mailbox_client.h>
 59#include <linux/io-64-nonatomic-lo-hi.h>
 60#include <acpi/pcc.h>
 61
 62#include "mailbox.h"
 63
 64#define MBOX_IRQ_NAME		"pcc-mbox"
 65
 66/**
 67 * struct pcc_chan_reg - PCC register bundle
 68 *
 69 * @vaddr: cached virtual address for this register
 70 * @gas: pointer to the generic address structure for this register
 71 * @preserve_mask: bitmask to preserve when writing to this register
 72 * @set_mask: bitmask to set when writing to this register
 73 * @status_mask: bitmask to determine and/or update the status for this register
 74 */
 75struct pcc_chan_reg {
 76	void __iomem *vaddr;
 77	struct acpi_generic_address *gas;
 78	u64 preserve_mask;
 79	u64 set_mask;
 80	u64 status_mask;
 81};
 82
 83/**
 84 * struct pcc_chan_info - PCC channel specific information
 85 *
 86 * @chan: PCC channel information with Shared Memory Region info
 87 * @db: PCC register bundle for the doorbell register
 88 * @plat_irq_ack: PCC register bundle for the platform interrupt acknowledge
 89 *	register
 90 * @cmd_complete: PCC register bundle for the command complete check register
 91 * @cmd_update: PCC register bundle for the command complete update register
 92 * @error: PCC register bundle for the error status register
 93 * @plat_irq: platform interrupt
 
 
 
 
 
 
 
 
 94 */
 95struct pcc_chan_info {
 96	struct pcc_mbox_chan chan;
 97	struct pcc_chan_reg db;
 98	struct pcc_chan_reg plat_irq_ack;
 99	struct pcc_chan_reg cmd_complete;
100	struct pcc_chan_reg cmd_update;
101	struct pcc_chan_reg error;
102	int plat_irq;
 
 
 
103};
104
105#define to_pcc_chan_info(c) container_of(c, struct pcc_chan_info, chan)
106static struct pcc_chan_info *chan_info;
107static int pcc_chan_count;
108
 
 
109/*
110 * PCC can be used with perf critical drivers such as CPPC
111 * So it makes sense to locally cache the virtual address and
112 * use it to read/write to PCC registers such as doorbell register
113 *
114 * The below read_register and write_registers are used to read and
115 * write from perf critical registers such as PCC doorbell register
116 */
117static void read_register(void __iomem *vaddr, u64 *val, unsigned int bit_width)
118{
119	switch (bit_width) {
120	case 8:
121		*val = readb(vaddr);
122		break;
123	case 16:
124		*val = readw(vaddr);
125		break;
126	case 32:
127		*val = readl(vaddr);
128		break;
129	case 64:
130		*val = readq(vaddr);
131		break;
132	}
133}
134
135static void write_register(void __iomem *vaddr, u64 val, unsigned int bit_width)
136{
137	switch (bit_width) {
138	case 8:
139		writeb(val, vaddr);
140		break;
141	case 16:
142		writew(val, vaddr);
143		break;
144	case 32:
145		writel(val, vaddr);
146		break;
147	case 64:
148		writeq(val, vaddr);
149		break;
150	}
151}
152
153static int pcc_chan_reg_read(struct pcc_chan_reg *reg, u64 *val)
154{
155	int ret = 0;
156
157	if (!reg->gas) {
158		*val = 0;
159		return 0;
160	}
161
162	if (reg->vaddr)
163		read_register(reg->vaddr, val, reg->gas->bit_width);
164	else
165		ret = acpi_read(val, reg->gas);
166
167	return ret;
168}
169
170static int pcc_chan_reg_write(struct pcc_chan_reg *reg, u64 val)
171{
172	int ret = 0;
173
174	if (!reg->gas)
175		return 0;
176
177	if (reg->vaddr)
178		write_register(reg->vaddr, val, reg->gas->bit_width);
179	else
180		ret = acpi_write(val, reg->gas);
181
182	return ret;
183}
184
185static int pcc_chan_reg_read_modify_write(struct pcc_chan_reg *reg)
186{
187	int ret = 0;
188	u64 val;
189
190	ret = pcc_chan_reg_read(reg, &val);
191	if (ret)
192		return ret;
193
194	val &= reg->preserve_mask;
195	val |= reg->set_mask;
196
197	return pcc_chan_reg_write(reg, val);
198}
199
200/**
201 * pcc_map_interrupt - Map a PCC subspace GSI to a linux IRQ number
202 * @interrupt: GSI number.
203 * @flags: interrupt flags
204 *
205 * Returns: a valid linux IRQ number on success
206 *		0 or -EINVAL on failure
207 */
208static int pcc_map_interrupt(u32 interrupt, u32 flags)
209{
210	int trigger, polarity;
211
212	if (!interrupt)
213		return 0;
214
215	trigger = (flags & ACPI_PCCT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
216			: ACPI_LEVEL_SENSITIVE;
217
218	polarity = (flags & ACPI_PCCT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
219			: ACPI_ACTIVE_HIGH;
220
221	return acpi_register_gsi(NULL, interrupt, trigger, polarity);
222}
223
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
224/**
225 * pcc_mbox_irq - PCC mailbox interrupt handler
226 * @irq:	interrupt number
227 * @p: data/cookie passed from the caller to identify the channel
228 *
229 * Returns: IRQ_HANDLED if interrupt is handled or IRQ_NONE if not
230 */
231static irqreturn_t pcc_mbox_irq(int irq, void *p)
232{
233	struct pcc_chan_info *pchan;
234	struct mbox_chan *chan = p;
235	u64 val;
236	int ret;
237
238	pchan = chan->con_priv;
239
240	ret = pcc_chan_reg_read(&pchan->cmd_complete, &val);
241	if (ret)
242		return IRQ_NONE;
243
244	if (val) { /* Ensure GAS exists and value is non-zero */
245		val &= pchan->cmd_complete.status_mask;
246		if (!val)
247			return IRQ_NONE;
248	}
249
250	ret = pcc_chan_reg_read(&pchan->error, &val);
251	if (ret)
252		return IRQ_NONE;
253	val &= pchan->error.status_mask;
254	if (val) {
255		val &= ~pchan->error.status_mask;
256		pcc_chan_reg_write(&pchan->error, val);
257		return IRQ_NONE;
258	}
259
260	if (pcc_chan_reg_read_modify_write(&pchan->plat_irq_ack))
261		return IRQ_NONE;
262
263	mbox_chan_received_data(chan, NULL);
264
 
 
 
 
 
 
 
 
 
 
265	return IRQ_HANDLED;
266}
267
268/**
269 * pcc_mbox_request_channel - PCC clients call this function to
270 *		request a pointer to their PCC subspace, from which they
271 *		can get the details of communicating with the remote.
272 * @cl: Pointer to Mailbox client, so we know where to bind the
273 *		Channel.
274 * @subspace_id: The PCC Subspace index as parsed in the PCC client
275 *		ACPI package. This is used to lookup the array of PCC
276 *		subspaces as parsed by the PCC Mailbox controller.
277 *
278 * Return: Pointer to the PCC Mailbox Channel if successful or ERR_PTR.
279 */
280struct pcc_mbox_chan *
281pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id)
282{
283	struct pcc_chan_info *pchan;
284	struct mbox_chan *chan;
285	struct device *dev;
286	unsigned long flags;
287
288	if (subspace_id < 0 || subspace_id >= pcc_chan_count)
289		return ERR_PTR(-ENOENT);
290
291	pchan = chan_info + subspace_id;
292	chan = pchan->chan.mchan;
293	if (IS_ERR(chan) || chan->cl) {
294		pr_err("Channel not found for idx: %d\n", subspace_id);
295		return ERR_PTR(-EBUSY);
296	}
297	dev = chan->mbox->dev;
298
299	spin_lock_irqsave(&chan->lock, flags);
300	chan->msg_free = 0;
301	chan->msg_count = 0;
302	chan->active_req = NULL;
303	chan->cl = cl;
304	init_completion(&chan->tx_complete);
305
306	if (chan->txdone_method == TXDONE_BY_POLL && cl->knows_txdone)
307		chan->txdone_method = TXDONE_BY_ACK;
308
309	spin_unlock_irqrestore(&chan->lock, flags);
310
311	if (pchan->plat_irq > 0) {
312		int rc;
313
314		rc = devm_request_irq(dev, pchan->plat_irq, pcc_mbox_irq, 0,
315				      MBOX_IRQ_NAME, chan);
316		if (unlikely(rc)) {
317			dev_err(dev, "failed to register PCC interrupt %d\n",
318				pchan->plat_irq);
319			pcc_mbox_free_channel(&pchan->chan);
320			return ERR_PTR(rc);
321		}
322	}
323
324	return &pchan->chan;
325}
326EXPORT_SYMBOL_GPL(pcc_mbox_request_channel);
327
328/**
329 * pcc_mbox_free_channel - Clients call this to free their Channel.
330 *
331 * @pchan: Pointer to the PCC mailbox channel as returned by
332 *	   pcc_mbox_request_channel()
333 */
334void pcc_mbox_free_channel(struct pcc_mbox_chan *pchan)
335{
336	struct pcc_chan_info *pchan_info = to_pcc_chan_info(pchan);
337	struct mbox_chan *chan = pchan->mchan;
338	unsigned long flags;
339
340	if (!chan || !chan->cl)
341		return;
342
343	if (pchan_info->plat_irq > 0)
344		devm_free_irq(chan->mbox->dev, pchan_info->plat_irq, chan);
345
346	spin_lock_irqsave(&chan->lock, flags);
347	chan->cl = NULL;
348	chan->active_req = NULL;
349	if (chan->txdone_method == TXDONE_BY_ACK)
350		chan->txdone_method = TXDONE_BY_POLL;
351
352	spin_unlock_irqrestore(&chan->lock, flags);
353}
354EXPORT_SYMBOL_GPL(pcc_mbox_free_channel);
355
356/**
357 * pcc_send_data - Called from Mailbox Controller code. Used
358 *		here only to ring the channel doorbell. The PCC client
359 *		specific read/write is done in the client driver in
360 *		order to maintain atomicity over PCC channel once
361 *		OS has control over it. See above for flow of operations.
362 * @chan: Pointer to Mailbox channel over which to send data.
363 * @data: Client specific data written over channel. Used here
364 *		only for debug after PCC transaction completes.
365 *
366 * Return: Err if something failed else 0 for success.
367 */
368static int pcc_send_data(struct mbox_chan *chan, void *data)
369{
370	int ret;
371	struct pcc_chan_info *pchan = chan->con_priv;
372
373	ret = pcc_chan_reg_read_modify_write(&pchan->cmd_update);
374	if (ret)
375		return ret;
376
377	return pcc_chan_reg_read_modify_write(&pchan->db);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
378}
379
380static const struct mbox_chan_ops pcc_chan_ops = {
381	.send_data = pcc_send_data,
 
 
382};
383
384/**
385 * parse_pcc_subspace - Count PCC subspaces defined
386 * @header: Pointer to the ACPI subtable header under the PCCT.
387 * @end: End of subtable entry.
388 *
389 * Return: If we find a PCC subspace entry of a valid type, return 0.
390 *	Otherwise, return -EINVAL.
391 *
392 * This gets called for each entry in the PCC table.
393 */
394static int parse_pcc_subspace(union acpi_subtable_headers *header,
395		const unsigned long end)
396{
397	struct acpi_pcct_subspace *ss = (struct acpi_pcct_subspace *) header;
398
399	if (ss->header.type < ACPI_PCCT_TYPE_RESERVED)
400		return 0;
401
402	return -EINVAL;
403}
404
405static int
406pcc_chan_reg_init(struct pcc_chan_reg *reg, struct acpi_generic_address *gas,
407		  u64 preserve_mask, u64 set_mask, u64 status_mask, char *name)
408{
409	if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
410		if (!(gas->bit_width >= 8 && gas->bit_width <= 64 &&
411		      is_power_of_2(gas->bit_width))) {
412			pr_err("Error: Cannot access register of %u bit width",
413			       gas->bit_width);
414			return -EFAULT;
415		}
416
417		reg->vaddr = acpi_os_ioremap(gas->address, gas->bit_width / 8);
418		if (!reg->vaddr) {
419			pr_err("Failed to ioremap PCC %s register\n", name);
420			return -ENOMEM;
421		}
422	}
423	reg->gas = gas;
424	reg->preserve_mask = preserve_mask;
425	reg->set_mask = set_mask;
426	reg->status_mask = status_mask;
427	return 0;
428}
429
430/**
431 * pcc_parse_subspace_irq - Parse the PCC IRQ and PCC ACK register
432 *
433 * @pchan: Pointer to the PCC channel info structure.
434 * @pcct_entry: Pointer to the ACPI subtable header.
435 *
436 * Return: 0 for Success, else errno.
437 *
438 * There should be one entry per PCC channel. This gets called for each
439 * entry in the PCC table. This uses PCCY Type1 structure for all applicable
440 * types(Type 1-4) to fetch irq
441 */
442static int pcc_parse_subspace_irq(struct pcc_chan_info *pchan,
443				  struct acpi_subtable_header *pcct_entry)
444{
445	int ret = 0;
446	struct acpi_pcct_hw_reduced *pcct_ss;
447
448	if (pcct_entry->type < ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE ||
449	    pcct_entry->type > ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE)
450		return 0;
451
452	pcct_ss = (struct acpi_pcct_hw_reduced *)pcct_entry;
453	pchan->plat_irq = pcc_map_interrupt(pcct_ss->platform_interrupt,
454					    (u32)pcct_ss->flags);
455	if (pchan->plat_irq <= 0) {
456		pr_err("PCC GSI %d not registered\n",
457		       pcct_ss->platform_interrupt);
458		return -EINVAL;
459	}
 
460
461	if (pcct_ss->header.type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
462		struct acpi_pcct_hw_reduced_type2 *pcct2_ss = (void *)pcct_ss;
463
464		ret = pcc_chan_reg_init(&pchan->plat_irq_ack,
465					&pcct2_ss->platform_ack_register,
466					pcct2_ss->ack_preserve_mask,
467					pcct2_ss->ack_write_mask, 0,
468					"PLAT IRQ ACK");
469
470	} else if (pcct_ss->header.type == ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE ||
471		   pcct_ss->header.type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE) {
472		struct acpi_pcct_ext_pcc_master *pcct_ext = (void *)pcct_ss;
473
474		ret = pcc_chan_reg_init(&pchan->plat_irq_ack,
475					&pcct_ext->platform_ack_register,
476					pcct_ext->ack_preserve_mask,
477					pcct_ext->ack_set_mask, 0,
478					"PLAT IRQ ACK");
479	}
480
 
 
 
 
 
 
481	return ret;
482}
483
484/**
485 * pcc_parse_subspace_db_reg - Parse the PCC doorbell register
486 *
487 * @pchan: Pointer to the PCC channel info structure.
488 * @pcct_entry: Pointer to the ACPI subtable header.
489 *
490 * Return: 0 for Success, else errno.
491 */
492static int pcc_parse_subspace_db_reg(struct pcc_chan_info *pchan,
493				     struct acpi_subtable_header *pcct_entry)
494{
495	int ret = 0;
496
497	if (pcct_entry->type <= ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
498		struct acpi_pcct_subspace *pcct_ss;
499
500		pcct_ss = (struct acpi_pcct_subspace *)pcct_entry;
501
502		ret = pcc_chan_reg_init(&pchan->db,
503					&pcct_ss->doorbell_register,
504					pcct_ss->preserve_mask,
505					pcct_ss->write_mask, 0,	"Doorbell");
506
507	} else {
508		struct acpi_pcct_ext_pcc_master *pcct_ext;
509
510		pcct_ext = (struct acpi_pcct_ext_pcc_master *)pcct_entry;
511
512		ret = pcc_chan_reg_init(&pchan->db,
513					&pcct_ext->doorbell_register,
514					pcct_ext->preserve_mask,
515					pcct_ext->write_mask, 0, "Doorbell");
516		if (ret)
517			return ret;
518
519		ret = pcc_chan_reg_init(&pchan->cmd_complete,
520					&pcct_ext->cmd_complete_register,
521					0, 0, pcct_ext->cmd_complete_mask,
522					"Command Complete Check");
523		if (ret)
524			return ret;
525
526		ret = pcc_chan_reg_init(&pchan->cmd_update,
527					&pcct_ext->cmd_update_register,
528					pcct_ext->cmd_update_preserve_mask,
529					pcct_ext->cmd_update_set_mask, 0,
530					"Command Complete Update");
531		if (ret)
532			return ret;
533
534		ret = pcc_chan_reg_init(&pchan->error,
535					&pcct_ext->error_status_register,
536					0, 0, pcct_ext->error_status_mask,
537					"Error Status");
538	}
539	return ret;
540}
541
542/**
543 * pcc_parse_subspace_shmem - Parse the PCC Shared Memory Region information
544 *
545 * @pchan: Pointer to the PCC channel info structure.
546 * @pcct_entry: Pointer to the ACPI subtable header.
547 *
548 */
549static void pcc_parse_subspace_shmem(struct pcc_chan_info *pchan,
550				     struct acpi_subtable_header *pcct_entry)
551{
552	if (pcct_entry->type <= ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
553		struct acpi_pcct_subspace *pcct_ss =
554			(struct acpi_pcct_subspace *)pcct_entry;
555
556		pchan->chan.shmem_base_addr = pcct_ss->base_address;
557		pchan->chan.shmem_size = pcct_ss->length;
558		pchan->chan.latency = pcct_ss->latency;
559		pchan->chan.max_access_rate = pcct_ss->max_access_rate;
560		pchan->chan.min_turnaround_time = pcct_ss->min_turnaround_time;
561	} else {
562		struct acpi_pcct_ext_pcc_master *pcct_ext =
563			(struct acpi_pcct_ext_pcc_master *)pcct_entry;
564
565		pchan->chan.shmem_base_addr = pcct_ext->base_address;
566		pchan->chan.shmem_size = pcct_ext->length;
567		pchan->chan.latency = pcct_ext->latency;
568		pchan->chan.max_access_rate = pcct_ext->max_access_rate;
569		pchan->chan.min_turnaround_time = pcct_ext->min_turnaround_time;
570	}
571}
572
573/**
574 * acpi_pcc_probe - Parse the ACPI tree for the PCCT.
575 *
576 * Return: 0 for Success, else errno.
577 */
578static int __init acpi_pcc_probe(void)
579{
580	int count, i, rc = 0;
581	acpi_status status;
582	struct acpi_table_header *pcct_tbl;
583	struct acpi_subtable_proc proc[ACPI_PCCT_TYPE_RESERVED];
584
585	status = acpi_get_table(ACPI_SIG_PCCT, 0, &pcct_tbl);
586	if (ACPI_FAILURE(status) || !pcct_tbl)
587		return -ENODEV;
588
589	/* Set up the subtable handlers */
590	for (i = ACPI_PCCT_TYPE_GENERIC_SUBSPACE;
591	     i < ACPI_PCCT_TYPE_RESERVED; i++) {
592		proc[i].id = i;
593		proc[i].count = 0;
594		proc[i].handler = parse_pcc_subspace;
595	}
596
597	count = acpi_table_parse_entries_array(ACPI_SIG_PCCT,
598			sizeof(struct acpi_table_pcct), proc,
599			ACPI_PCCT_TYPE_RESERVED, MAX_PCC_SUBSPACES);
600	if (count <= 0 || count > MAX_PCC_SUBSPACES) {
601		if (count < 0)
602			pr_warn("Error parsing PCC subspaces from PCCT\n");
603		else
604			pr_warn("Invalid PCCT: %d PCC subspaces\n", count);
605
606		rc = -EINVAL;
607	} else {
608		pcc_chan_count = count;
609	}
610
611	acpi_put_table(pcct_tbl);
612
613	return rc;
614}
615
616/**
617 * pcc_mbox_probe - Called when we find a match for the
618 *	PCCT platform device. This is purely used to represent
619 *	the PCCT as a virtual device for registering with the
620 *	generic Mailbox framework.
621 *
622 * @pdev: Pointer to platform device returned when a match
623 *	is found.
624 *
625 *	Return: 0 for Success, else errno.
626 */
627static int pcc_mbox_probe(struct platform_device *pdev)
628{
629	struct device *dev = &pdev->dev;
630	struct mbox_controller *pcc_mbox_ctrl;
631	struct mbox_chan *pcc_mbox_channels;
632	struct acpi_table_header *pcct_tbl;
633	struct acpi_subtable_header *pcct_entry;
634	struct acpi_table_pcct *acpi_pcct_tbl;
635	acpi_status status = AE_OK;
636	int i, rc, count = pcc_chan_count;
637
638	/* Search for PCCT */
639	status = acpi_get_table(ACPI_SIG_PCCT, 0, &pcct_tbl);
640
641	if (ACPI_FAILURE(status) || !pcct_tbl)
642		return -ENODEV;
643
644	pcc_mbox_channels = devm_kcalloc(dev, count, sizeof(*pcc_mbox_channels),
645					 GFP_KERNEL);
646	if (!pcc_mbox_channels) {
647		rc = -ENOMEM;
648		goto err;
649	}
650
651	chan_info = devm_kcalloc(dev, count, sizeof(*chan_info), GFP_KERNEL);
652	if (!chan_info) {
653		rc = -ENOMEM;
654		goto err;
655	}
656
657	pcc_mbox_ctrl = devm_kzalloc(dev, sizeof(*pcc_mbox_ctrl), GFP_KERNEL);
658	if (!pcc_mbox_ctrl) {
659		rc = -ENOMEM;
660		goto err;
661	}
662
663	/* Point to the first PCC subspace entry */
664	pcct_entry = (struct acpi_subtable_header *) (
665		(unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct));
666
667	acpi_pcct_tbl = (struct acpi_table_pcct *) pcct_tbl;
668	if (acpi_pcct_tbl->flags & ACPI_PCCT_DOORBELL)
669		pcc_mbox_ctrl->txdone_irq = true;
670
671	for (i = 0; i < count; i++) {
672		struct pcc_chan_info *pchan = chan_info + i;
673
674		pcc_mbox_channels[i].con_priv = pchan;
675		pchan->chan.mchan = &pcc_mbox_channels[i];
676
677		if (pcct_entry->type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE &&
678		    !pcc_mbox_ctrl->txdone_irq) {
679			pr_err("Platform Interrupt flag must be set to 1");
680			rc = -EINVAL;
681			goto err;
682		}
683
684		if (pcc_mbox_ctrl->txdone_irq) {
685			rc = pcc_parse_subspace_irq(pchan, pcct_entry);
686			if (rc < 0)
687				goto err;
688		}
689		rc = pcc_parse_subspace_db_reg(pchan, pcct_entry);
690		if (rc < 0)
691			goto err;
692
693		pcc_parse_subspace_shmem(pchan, pcct_entry);
694
 
695		pcct_entry = (struct acpi_subtable_header *)
696			((unsigned long) pcct_entry + pcct_entry->length);
697	}
698
699	pcc_mbox_ctrl->num_chans = count;
700
701	pr_info("Detected %d PCC Subspaces\n", pcc_mbox_ctrl->num_chans);
702
703	pcc_mbox_ctrl->chans = pcc_mbox_channels;
704	pcc_mbox_ctrl->ops = &pcc_chan_ops;
705	pcc_mbox_ctrl->dev = dev;
706
707	pr_info("Registering PCC driver as Mailbox controller\n");
708	rc = mbox_controller_register(pcc_mbox_ctrl);
709	if (rc)
710		pr_err("Err registering PCC as Mailbox controller: %d\n", rc);
711	else
712		return 0;
713err:
714	acpi_put_table(pcct_tbl);
715	return rc;
716}
717
718static struct platform_driver pcc_mbox_driver = {
719	.probe = pcc_mbox_probe,
720	.driver = {
721		.name = "PCCT",
722	},
723};
724
725static int __init pcc_init(void)
726{
727	int ret;
728	struct platform_device *pcc_pdev;
729
730	if (acpi_disabled)
731		return -ENODEV;
732
733	/* Check if PCC support is available. */
734	ret = acpi_pcc_probe();
735
736	if (ret) {
737		pr_debug("ACPI PCC probe failed.\n");
738		return -ENODEV;
739	}
740
741	pcc_pdev = platform_create_bundle(&pcc_mbox_driver,
742			pcc_mbox_probe, NULL, 0, NULL, 0);
743
744	if (IS_ERR(pcc_pdev)) {
745		pr_debug("Err creating PCC platform bundle\n");
746		pcc_chan_count = 0;
747		return PTR_ERR(pcc_pdev);
748	}
749
750	return 0;
751}
752
753/*
754 * Make PCC init postcore so that users of this mailbox
755 * such as the ACPI Processor driver have it available
756 * at their init.
757 */
758postcore_initcall(pcc_init);
v6.9.4
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 *	Copyright (C) 2014 Linaro Ltd.
  4 *	Author:	Ashwin Chaugule <ashwin.chaugule@linaro.org>
  5 *
  6 *  PCC (Platform Communication Channel) is defined in the ACPI 5.0+
  7 *  specification. It is a mailbox like mechanism to allow clients
  8 *  such as CPPC (Collaborative Processor Performance Control), RAS
  9 *  (Reliability, Availability and Serviceability) and MPST (Memory
 10 *  Node Power State Table) to talk to the platform (e.g. BMC) through
 11 *  shared memory regions as defined in the PCC table entries. The PCC
 12 *  specification supports a Doorbell mechanism for the PCC clients
 13 *  to notify the platform about new data. This Doorbell information
 14 *  is also specified in each PCC table entry.
 15 *
 16 *  Typical high level flow of operation is:
 17 *
 18 *  PCC Reads:
 19 *  * Client tries to acquire a channel lock.
 20 *  * After it is acquired it writes READ cmd in communication region cmd
 21 *		address.
 22 *  * Client issues mbox_send_message() which rings the PCC doorbell
 23 *		for its PCC channel.
 24 *  * If command completes, then client has control over channel and
 25 *		it can proceed with its reads.
 26 *  * Client releases lock.
 27 *
 28 *  PCC Writes:
 29 *  * Client tries to acquire channel lock.
 30 *  * Client writes to its communication region after it acquires a
 31 *		channel lock.
 32 *  * Client writes WRITE cmd in communication region cmd address.
 33 *  * Client issues mbox_send_message() which rings the PCC doorbell
 34 *		for its PCC channel.
 35 *  * If command completes, then writes have succeeded and it can release
 36 *		the channel lock.
 37 *
 38 *  There is a Nominal latency defined for each channel which indicates
 39 *  how long to wait until a command completes. If command is not complete
 40 *  the client needs to retry or assume failure.
 41 *
 42 *	For more details about PCC, please see the ACPI specification from
 43 *  http://www.uefi.org/ACPIv5.1 Section 14.
 44 *
 45 *  This file implements PCC as a Mailbox controller and allows for PCC
 46 *  clients to be implemented as its Mailbox Client Channels.
 47 */
 48
 49#include <linux/acpi.h>
 50#include <linux/delay.h>
 51#include <linux/io.h>
 52#include <linux/init.h>
 53#include <linux/interrupt.h>
 54#include <linux/list.h>
 55#include <linux/log2.h>
 56#include <linux/platform_device.h>
 57#include <linux/mailbox_controller.h>
 58#include <linux/mailbox_client.h>
 59#include <linux/io-64-nonatomic-lo-hi.h>
 60#include <acpi/pcc.h>
 61
 62#include "mailbox.h"
 63
 64#define MBOX_IRQ_NAME		"pcc-mbox"
 65
 66/**
 67 * struct pcc_chan_reg - PCC register bundle
 68 *
 69 * @vaddr: cached virtual address for this register
 70 * @gas: pointer to the generic address structure for this register
 71 * @preserve_mask: bitmask to preserve when writing to this register
 72 * @set_mask: bitmask to set when writing to this register
 73 * @status_mask: bitmask to determine and/or update the status for this register
 74 */
 75struct pcc_chan_reg {
 76	void __iomem *vaddr;
 77	struct acpi_generic_address *gas;
 78	u64 preserve_mask;
 79	u64 set_mask;
 80	u64 status_mask;
 81};
 82
 83/**
 84 * struct pcc_chan_info - PCC channel specific information
 85 *
 86 * @chan: PCC channel information with Shared Memory Region info
 87 * @db: PCC register bundle for the doorbell register
 88 * @plat_irq_ack: PCC register bundle for the platform interrupt acknowledge
 89 *	register
 90 * @cmd_complete: PCC register bundle for the command complete check register
 91 * @cmd_update: PCC register bundle for the command complete update register
 92 * @error: PCC register bundle for the error status register
 93 * @plat_irq: platform interrupt
 94 * @type: PCC subspace type
 95 * @plat_irq_flags: platform interrupt flags
 96 * @chan_in_use: this flag is used just to check if the interrupt needs
 97 *		handling when it is shared. Since only one transfer can occur
 98 *		at a time and mailbox takes care of locking, this flag can be
 99 *		accessed without a lock. Note: the type only support the
100 *		communication from OSPM to Platform, like type3, use it, and
101 *		other types completely ignore it.
102 */
103struct pcc_chan_info {
104	struct pcc_mbox_chan chan;
105	struct pcc_chan_reg db;
106	struct pcc_chan_reg plat_irq_ack;
107	struct pcc_chan_reg cmd_complete;
108	struct pcc_chan_reg cmd_update;
109	struct pcc_chan_reg error;
110	int plat_irq;
111	u8 type;
112	unsigned int plat_irq_flags;
113	bool chan_in_use;
114};
115
116#define to_pcc_chan_info(c) container_of(c, struct pcc_chan_info, chan)
117static struct pcc_chan_info *chan_info;
118static int pcc_chan_count;
119
120static int pcc_send_data(struct mbox_chan *chan, void *data);
121
122/*
123 * PCC can be used with perf critical drivers such as CPPC
124 * So it makes sense to locally cache the virtual address and
125 * use it to read/write to PCC registers such as doorbell register
126 *
127 * The below read_register and write_registers are used to read and
128 * write from perf critical registers such as PCC doorbell register
129 */
130static void read_register(void __iomem *vaddr, u64 *val, unsigned int bit_width)
131{
132	switch (bit_width) {
133	case 8:
134		*val = readb(vaddr);
135		break;
136	case 16:
137		*val = readw(vaddr);
138		break;
139	case 32:
140		*val = readl(vaddr);
141		break;
142	case 64:
143		*val = readq(vaddr);
144		break;
145	}
146}
147
148static void write_register(void __iomem *vaddr, u64 val, unsigned int bit_width)
149{
150	switch (bit_width) {
151	case 8:
152		writeb(val, vaddr);
153		break;
154	case 16:
155		writew(val, vaddr);
156		break;
157	case 32:
158		writel(val, vaddr);
159		break;
160	case 64:
161		writeq(val, vaddr);
162		break;
163	}
164}
165
166static int pcc_chan_reg_read(struct pcc_chan_reg *reg, u64 *val)
167{
168	int ret = 0;
169
170	if (!reg->gas) {
171		*val = 0;
172		return 0;
173	}
174
175	if (reg->vaddr)
176		read_register(reg->vaddr, val, reg->gas->bit_width);
177	else
178		ret = acpi_read(val, reg->gas);
179
180	return ret;
181}
182
183static int pcc_chan_reg_write(struct pcc_chan_reg *reg, u64 val)
184{
185	int ret = 0;
186
187	if (!reg->gas)
188		return 0;
189
190	if (reg->vaddr)
191		write_register(reg->vaddr, val, reg->gas->bit_width);
192	else
193		ret = acpi_write(val, reg->gas);
194
195	return ret;
196}
197
198static int pcc_chan_reg_read_modify_write(struct pcc_chan_reg *reg)
199{
200	int ret = 0;
201	u64 val;
202
203	ret = pcc_chan_reg_read(reg, &val);
204	if (ret)
205		return ret;
206
207	val &= reg->preserve_mask;
208	val |= reg->set_mask;
209
210	return pcc_chan_reg_write(reg, val);
211}
212
213/**
214 * pcc_map_interrupt - Map a PCC subspace GSI to a linux IRQ number
215 * @interrupt: GSI number.
216 * @flags: interrupt flags
217 *
218 * Returns: a valid linux IRQ number on success
219 *		0 or -EINVAL on failure
220 */
221static int pcc_map_interrupt(u32 interrupt, u32 flags)
222{
223	int trigger, polarity;
224
225	if (!interrupt)
226		return 0;
227
228	trigger = (flags & ACPI_PCCT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
229			: ACPI_LEVEL_SENSITIVE;
230
231	polarity = (flags & ACPI_PCCT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
232			: ACPI_ACTIVE_HIGH;
233
234	return acpi_register_gsi(NULL, interrupt, trigger, polarity);
235}
236
237static bool pcc_chan_plat_irq_can_be_shared(struct pcc_chan_info *pchan)
238{
239	return (pchan->plat_irq_flags & ACPI_PCCT_INTERRUPT_MODE) ==
240		ACPI_LEVEL_SENSITIVE;
241}
242
243static bool pcc_mbox_cmd_complete_check(struct pcc_chan_info *pchan)
244{
245	u64 val;
246	int ret;
247
248	ret = pcc_chan_reg_read(&pchan->cmd_complete, &val);
249	if (ret)
250		return false;
251
252	if (!pchan->cmd_complete.gas)
253		return true;
254
255	/*
256	 * Judge if the channel respond the interrupt based on the value of
257	 * command complete.
258	 */
259	val &= pchan->cmd_complete.status_mask;
260
261	/*
262	 * If this is PCC slave subspace channel, and the command complete
263	 * bit 0 indicates that Platform is sending a notification and OSPM
264	 * needs to respond this interrupt to process this command.
265	 */
266	if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE)
267		return !val;
268
269	return !!val;
270}
271
272/**
273 * pcc_mbox_irq - PCC mailbox interrupt handler
274 * @irq:	interrupt number
275 * @p: data/cookie passed from the caller to identify the channel
276 *
277 * Returns: IRQ_HANDLED if interrupt is handled or IRQ_NONE if not
278 */
279static irqreturn_t pcc_mbox_irq(int irq, void *p)
280{
281	struct pcc_chan_info *pchan;
282	struct mbox_chan *chan = p;
283	u64 val;
284	int ret;
285
286	pchan = chan->con_priv;
287	if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE &&
288	    !pchan->chan_in_use)
 
289		return IRQ_NONE;
290
291	if (!pcc_mbox_cmd_complete_check(pchan))
292		return IRQ_NONE;
 
 
 
293
294	ret = pcc_chan_reg_read(&pchan->error, &val);
295	if (ret)
296		return IRQ_NONE;
297	val &= pchan->error.status_mask;
298	if (val) {
299		val &= ~pchan->error.status_mask;
300		pcc_chan_reg_write(&pchan->error, val);
301		return IRQ_NONE;
302	}
303
304	if (pcc_chan_reg_read_modify_write(&pchan->plat_irq_ack))
305		return IRQ_NONE;
306
307	mbox_chan_received_data(chan, NULL);
308
309	/*
310	 * The PCC slave subspace channel needs to set the command complete bit
311	 * and ring doorbell after processing message.
312	 *
313	 * The PCC master subspace channel clears chan_in_use to free channel.
314	 */
315	if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE)
316		pcc_send_data(chan, NULL);
317	pchan->chan_in_use = false;
318
319	return IRQ_HANDLED;
320}
321
322/**
323 * pcc_mbox_request_channel - PCC clients call this function to
324 *		request a pointer to their PCC subspace, from which they
325 *		can get the details of communicating with the remote.
326 * @cl: Pointer to Mailbox client, so we know where to bind the
327 *		Channel.
328 * @subspace_id: The PCC Subspace index as parsed in the PCC client
329 *		ACPI package. This is used to lookup the array of PCC
330 *		subspaces as parsed by the PCC Mailbox controller.
331 *
332 * Return: Pointer to the PCC Mailbox Channel if successful or ERR_PTR.
333 */
334struct pcc_mbox_chan *
335pcc_mbox_request_channel(struct mbox_client *cl, int subspace_id)
336{
337	struct pcc_chan_info *pchan;
338	struct mbox_chan *chan;
339	int rc;
 
340
341	if (subspace_id < 0 || subspace_id >= pcc_chan_count)
342		return ERR_PTR(-ENOENT);
343
344	pchan = chan_info + subspace_id;
345	chan = pchan->chan.mchan;
346	if (IS_ERR(chan) || chan->cl) {
347		pr_err("Channel not found for idx: %d\n", subspace_id);
348		return ERR_PTR(-EBUSY);
349	}
 
 
 
 
 
 
 
 
 
 
 
350
351	rc = mbox_bind_client(chan, cl);
352	if (rc)
353		return ERR_PTR(rc);
 
 
 
 
 
 
 
 
 
 
 
354
355	return &pchan->chan;
356}
357EXPORT_SYMBOL_GPL(pcc_mbox_request_channel);
358
359/**
360 * pcc_mbox_free_channel - Clients call this to free their Channel.
361 *
362 * @pchan: Pointer to the PCC mailbox channel as returned by
363 *	   pcc_mbox_request_channel()
364 */
365void pcc_mbox_free_channel(struct pcc_mbox_chan *pchan)
366{
 
367	struct mbox_chan *chan = pchan->mchan;
 
368
369	if (!chan || !chan->cl)
370		return;
371
372	mbox_free_channel(chan);
 
 
 
 
 
 
 
 
 
373}
374EXPORT_SYMBOL_GPL(pcc_mbox_free_channel);
375
376/**
377 * pcc_send_data - Called from Mailbox Controller code. Used
378 *		here only to ring the channel doorbell. The PCC client
379 *		specific read/write is done in the client driver in
380 *		order to maintain atomicity over PCC channel once
381 *		OS has control over it. See above for flow of operations.
382 * @chan: Pointer to Mailbox channel over which to send data.
383 * @data: Client specific data written over channel. Used here
384 *		only for debug after PCC transaction completes.
385 *
386 * Return: Err if something failed else 0 for success.
387 */
388static int pcc_send_data(struct mbox_chan *chan, void *data)
389{
390	int ret;
391	struct pcc_chan_info *pchan = chan->con_priv;
392
393	ret = pcc_chan_reg_read_modify_write(&pchan->cmd_update);
394	if (ret)
395		return ret;
396
397	ret = pcc_chan_reg_read_modify_write(&pchan->db);
398	if (!ret && pchan->plat_irq > 0)
399		pchan->chan_in_use = true;
400
401	return ret;
402}
403
404/**
405 * pcc_startup - Called from Mailbox Controller code. Used here
406 *		to request the interrupt.
407 * @chan: Pointer to Mailbox channel to startup.
408 *
409 * Return: Err if something failed else 0 for success.
410 */
411static int pcc_startup(struct mbox_chan *chan)
412{
413	struct pcc_chan_info *pchan = chan->con_priv;
414	unsigned long irqflags;
415	int rc;
416
417	if (pchan->plat_irq > 0) {
418		irqflags = pcc_chan_plat_irq_can_be_shared(pchan) ?
419						IRQF_SHARED | IRQF_ONESHOT : 0;
420		rc = devm_request_irq(chan->mbox->dev, pchan->plat_irq, pcc_mbox_irq,
421				      irqflags, MBOX_IRQ_NAME, chan);
422		if (unlikely(rc)) {
423			dev_err(chan->mbox->dev, "failed to register PCC interrupt %d\n",
424				pchan->plat_irq);
425			return rc;
426		}
427	}
428
429	return 0;
430}
431
432/**
433 * pcc_shutdown - Called from Mailbox Controller code. Used here
434 *		to free the interrupt.
435 * @chan: Pointer to Mailbox channel to shutdown.
436 */
437static void pcc_shutdown(struct mbox_chan *chan)
438{
439	struct pcc_chan_info *pchan = chan->con_priv;
440
441	if (pchan->plat_irq > 0)
442		devm_free_irq(chan->mbox->dev, pchan->plat_irq, chan);
443}
444
445static const struct mbox_chan_ops pcc_chan_ops = {
446	.send_data = pcc_send_data,
447	.startup = pcc_startup,
448	.shutdown = pcc_shutdown,
449};
450
451/**
452 * parse_pcc_subspace - Count PCC subspaces defined
453 * @header: Pointer to the ACPI subtable header under the PCCT.
454 * @end: End of subtable entry.
455 *
456 * Return: If we find a PCC subspace entry of a valid type, return 0.
457 *	Otherwise, return -EINVAL.
458 *
459 * This gets called for each entry in the PCC table.
460 */
461static int parse_pcc_subspace(union acpi_subtable_headers *header,
462		const unsigned long end)
463{
464	struct acpi_pcct_subspace *ss = (struct acpi_pcct_subspace *) header;
465
466	if (ss->header.type < ACPI_PCCT_TYPE_RESERVED)
467		return 0;
468
469	return -EINVAL;
470}
471
472static int
473pcc_chan_reg_init(struct pcc_chan_reg *reg, struct acpi_generic_address *gas,
474		  u64 preserve_mask, u64 set_mask, u64 status_mask, char *name)
475{
476	if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
477		if (!(gas->bit_width >= 8 && gas->bit_width <= 64 &&
478		      is_power_of_2(gas->bit_width))) {
479			pr_err("Error: Cannot access register of %u bit width",
480			       gas->bit_width);
481			return -EFAULT;
482		}
483
484		reg->vaddr = acpi_os_ioremap(gas->address, gas->bit_width / 8);
485		if (!reg->vaddr) {
486			pr_err("Failed to ioremap PCC %s register\n", name);
487			return -ENOMEM;
488		}
489	}
490	reg->gas = gas;
491	reg->preserve_mask = preserve_mask;
492	reg->set_mask = set_mask;
493	reg->status_mask = status_mask;
494	return 0;
495}
496
497/**
498 * pcc_parse_subspace_irq - Parse the PCC IRQ and PCC ACK register
499 *
500 * @pchan: Pointer to the PCC channel info structure.
501 * @pcct_entry: Pointer to the ACPI subtable header.
502 *
503 * Return: 0 for Success, else errno.
504 *
505 * There should be one entry per PCC channel. This gets called for each
506 * entry in the PCC table. This uses PCCY Type1 structure for all applicable
507 * types(Type 1-4) to fetch irq
508 */
509static int pcc_parse_subspace_irq(struct pcc_chan_info *pchan,
510				  struct acpi_subtable_header *pcct_entry)
511{
512	int ret = 0;
513	struct acpi_pcct_hw_reduced *pcct_ss;
514
515	if (pcct_entry->type < ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE ||
516	    pcct_entry->type > ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE)
517		return 0;
518
519	pcct_ss = (struct acpi_pcct_hw_reduced *)pcct_entry;
520	pchan->plat_irq = pcc_map_interrupt(pcct_ss->platform_interrupt,
521					    (u32)pcct_ss->flags);
522	if (pchan->plat_irq <= 0) {
523		pr_err("PCC GSI %d not registered\n",
524		       pcct_ss->platform_interrupt);
525		return -EINVAL;
526	}
527	pchan->plat_irq_flags = pcct_ss->flags;
528
529	if (pcct_ss->header.type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
530		struct acpi_pcct_hw_reduced_type2 *pcct2_ss = (void *)pcct_ss;
531
532		ret = pcc_chan_reg_init(&pchan->plat_irq_ack,
533					&pcct2_ss->platform_ack_register,
534					pcct2_ss->ack_preserve_mask,
535					pcct2_ss->ack_write_mask, 0,
536					"PLAT IRQ ACK");
537
538	} else if (pcct_ss->header.type == ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE ||
539		   pcct_ss->header.type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE) {
540		struct acpi_pcct_ext_pcc_master *pcct_ext = (void *)pcct_ss;
541
542		ret = pcc_chan_reg_init(&pchan->plat_irq_ack,
543					&pcct_ext->platform_ack_register,
544					pcct_ext->ack_preserve_mask,
545					pcct_ext->ack_set_mask, 0,
546					"PLAT IRQ ACK");
547	}
548
549	if (pcc_chan_plat_irq_can_be_shared(pchan) &&
550	    !pchan->plat_irq_ack.gas) {
551		pr_err("PCC subspace has level IRQ with no ACK register\n");
552		return -EINVAL;
553	}
554
555	return ret;
556}
557
558/**
559 * pcc_parse_subspace_db_reg - Parse the PCC doorbell register
560 *
561 * @pchan: Pointer to the PCC channel info structure.
562 * @pcct_entry: Pointer to the ACPI subtable header.
563 *
564 * Return: 0 for Success, else errno.
565 */
566static int pcc_parse_subspace_db_reg(struct pcc_chan_info *pchan,
567				     struct acpi_subtable_header *pcct_entry)
568{
569	int ret = 0;
570
571	if (pcct_entry->type <= ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
572		struct acpi_pcct_subspace *pcct_ss;
573
574		pcct_ss = (struct acpi_pcct_subspace *)pcct_entry;
575
576		ret = pcc_chan_reg_init(&pchan->db,
577					&pcct_ss->doorbell_register,
578					pcct_ss->preserve_mask,
579					pcct_ss->write_mask, 0,	"Doorbell");
580
581	} else {
582		struct acpi_pcct_ext_pcc_master *pcct_ext;
583
584		pcct_ext = (struct acpi_pcct_ext_pcc_master *)pcct_entry;
585
586		ret = pcc_chan_reg_init(&pchan->db,
587					&pcct_ext->doorbell_register,
588					pcct_ext->preserve_mask,
589					pcct_ext->write_mask, 0, "Doorbell");
590		if (ret)
591			return ret;
592
593		ret = pcc_chan_reg_init(&pchan->cmd_complete,
594					&pcct_ext->cmd_complete_register,
595					0, 0, pcct_ext->cmd_complete_mask,
596					"Command Complete Check");
597		if (ret)
598			return ret;
599
600		ret = pcc_chan_reg_init(&pchan->cmd_update,
601					&pcct_ext->cmd_update_register,
602					pcct_ext->cmd_update_preserve_mask,
603					pcct_ext->cmd_update_set_mask, 0,
604					"Command Complete Update");
605		if (ret)
606			return ret;
607
608		ret = pcc_chan_reg_init(&pchan->error,
609					&pcct_ext->error_status_register,
610					0, 0, pcct_ext->error_status_mask,
611					"Error Status");
612	}
613	return ret;
614}
615
616/**
617 * pcc_parse_subspace_shmem - Parse the PCC Shared Memory Region information
618 *
619 * @pchan: Pointer to the PCC channel info structure.
620 * @pcct_entry: Pointer to the ACPI subtable header.
621 *
622 */
623static void pcc_parse_subspace_shmem(struct pcc_chan_info *pchan,
624				     struct acpi_subtable_header *pcct_entry)
625{
626	if (pcct_entry->type <= ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
627		struct acpi_pcct_subspace *pcct_ss =
628			(struct acpi_pcct_subspace *)pcct_entry;
629
630		pchan->chan.shmem_base_addr = pcct_ss->base_address;
631		pchan->chan.shmem_size = pcct_ss->length;
632		pchan->chan.latency = pcct_ss->latency;
633		pchan->chan.max_access_rate = pcct_ss->max_access_rate;
634		pchan->chan.min_turnaround_time = pcct_ss->min_turnaround_time;
635	} else {
636		struct acpi_pcct_ext_pcc_master *pcct_ext =
637			(struct acpi_pcct_ext_pcc_master *)pcct_entry;
638
639		pchan->chan.shmem_base_addr = pcct_ext->base_address;
640		pchan->chan.shmem_size = pcct_ext->length;
641		pchan->chan.latency = pcct_ext->latency;
642		pchan->chan.max_access_rate = pcct_ext->max_access_rate;
643		pchan->chan.min_turnaround_time = pcct_ext->min_turnaround_time;
644	}
645}
646
647/**
648 * acpi_pcc_probe - Parse the ACPI tree for the PCCT.
649 *
650 * Return: 0 for Success, else errno.
651 */
652static int __init acpi_pcc_probe(void)
653{
654	int count, i, rc = 0;
655	acpi_status status;
656	struct acpi_table_header *pcct_tbl;
657	struct acpi_subtable_proc proc[ACPI_PCCT_TYPE_RESERVED];
658
659	status = acpi_get_table(ACPI_SIG_PCCT, 0, &pcct_tbl);
660	if (ACPI_FAILURE(status) || !pcct_tbl)
661		return -ENODEV;
662
663	/* Set up the subtable handlers */
664	for (i = ACPI_PCCT_TYPE_GENERIC_SUBSPACE;
665	     i < ACPI_PCCT_TYPE_RESERVED; i++) {
666		proc[i].id = i;
667		proc[i].count = 0;
668		proc[i].handler = parse_pcc_subspace;
669	}
670
671	count = acpi_table_parse_entries_array(ACPI_SIG_PCCT,
672			sizeof(struct acpi_table_pcct), proc,
673			ACPI_PCCT_TYPE_RESERVED, MAX_PCC_SUBSPACES);
674	if (count <= 0 || count > MAX_PCC_SUBSPACES) {
675		if (count < 0)
676			pr_warn("Error parsing PCC subspaces from PCCT\n");
677		else
678			pr_warn("Invalid PCCT: %d PCC subspaces\n", count);
679
680		rc = -EINVAL;
681	} else {
682		pcc_chan_count = count;
683	}
684
685	acpi_put_table(pcct_tbl);
686
687	return rc;
688}
689
690/**
691 * pcc_mbox_probe - Called when we find a match for the
692 *	PCCT platform device. This is purely used to represent
693 *	the PCCT as a virtual device for registering with the
694 *	generic Mailbox framework.
695 *
696 * @pdev: Pointer to platform device returned when a match
697 *	is found.
698 *
699 *	Return: 0 for Success, else errno.
700 */
701static int pcc_mbox_probe(struct platform_device *pdev)
702{
703	struct device *dev = &pdev->dev;
704	struct mbox_controller *pcc_mbox_ctrl;
705	struct mbox_chan *pcc_mbox_channels;
706	struct acpi_table_header *pcct_tbl;
707	struct acpi_subtable_header *pcct_entry;
708	struct acpi_table_pcct *acpi_pcct_tbl;
709	acpi_status status = AE_OK;
710	int i, rc, count = pcc_chan_count;
711
712	/* Search for PCCT */
713	status = acpi_get_table(ACPI_SIG_PCCT, 0, &pcct_tbl);
714
715	if (ACPI_FAILURE(status) || !pcct_tbl)
716		return -ENODEV;
717
718	pcc_mbox_channels = devm_kcalloc(dev, count, sizeof(*pcc_mbox_channels),
719					 GFP_KERNEL);
720	if (!pcc_mbox_channels) {
721		rc = -ENOMEM;
722		goto err;
723	}
724
725	chan_info = devm_kcalloc(dev, count, sizeof(*chan_info), GFP_KERNEL);
726	if (!chan_info) {
727		rc = -ENOMEM;
728		goto err;
729	}
730
731	pcc_mbox_ctrl = devm_kzalloc(dev, sizeof(*pcc_mbox_ctrl), GFP_KERNEL);
732	if (!pcc_mbox_ctrl) {
733		rc = -ENOMEM;
734		goto err;
735	}
736
737	/* Point to the first PCC subspace entry */
738	pcct_entry = (struct acpi_subtable_header *) (
739		(unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct));
740
741	acpi_pcct_tbl = (struct acpi_table_pcct *) pcct_tbl;
742	if (acpi_pcct_tbl->flags & ACPI_PCCT_DOORBELL)
743		pcc_mbox_ctrl->txdone_irq = true;
744
745	for (i = 0; i < count; i++) {
746		struct pcc_chan_info *pchan = chan_info + i;
747
748		pcc_mbox_channels[i].con_priv = pchan;
749		pchan->chan.mchan = &pcc_mbox_channels[i];
750
751		if (pcct_entry->type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE &&
752		    !pcc_mbox_ctrl->txdone_irq) {
753			pr_err("Platform Interrupt flag must be set to 1");
754			rc = -EINVAL;
755			goto err;
756		}
757
758		if (pcc_mbox_ctrl->txdone_irq) {
759			rc = pcc_parse_subspace_irq(pchan, pcct_entry);
760			if (rc < 0)
761				goto err;
762		}
763		rc = pcc_parse_subspace_db_reg(pchan, pcct_entry);
764		if (rc < 0)
765			goto err;
766
767		pcc_parse_subspace_shmem(pchan, pcct_entry);
768
769		pchan->type = pcct_entry->type;
770		pcct_entry = (struct acpi_subtable_header *)
771			((unsigned long) pcct_entry + pcct_entry->length);
772	}
773
774	pcc_mbox_ctrl->num_chans = count;
775
776	pr_info("Detected %d PCC Subspaces\n", pcc_mbox_ctrl->num_chans);
777
778	pcc_mbox_ctrl->chans = pcc_mbox_channels;
779	pcc_mbox_ctrl->ops = &pcc_chan_ops;
780	pcc_mbox_ctrl->dev = dev;
781
782	pr_info("Registering PCC driver as Mailbox controller\n");
783	rc = mbox_controller_register(pcc_mbox_ctrl);
784	if (rc)
785		pr_err("Err registering PCC as Mailbox controller: %d\n", rc);
786	else
787		return 0;
788err:
789	acpi_put_table(pcct_tbl);
790	return rc;
791}
792
793static struct platform_driver pcc_mbox_driver = {
794	.probe = pcc_mbox_probe,
795	.driver = {
796		.name = "PCCT",
797	},
798};
799
800static int __init pcc_init(void)
801{
802	int ret;
803	struct platform_device *pcc_pdev;
804
805	if (acpi_disabled)
806		return -ENODEV;
807
808	/* Check if PCC support is available. */
809	ret = acpi_pcc_probe();
810
811	if (ret) {
812		pr_debug("ACPI PCC probe failed.\n");
813		return -ENODEV;
814	}
815
816	pcc_pdev = platform_create_bundle(&pcc_mbox_driver,
817			pcc_mbox_probe, NULL, 0, NULL, 0);
818
819	if (IS_ERR(pcc_pdev)) {
820		pr_debug("Err creating PCC platform bundle\n");
821		pcc_chan_count = 0;
822		return PTR_ERR(pcc_pdev);
823	}
824
825	return 0;
826}
827
828/*
829 * Make PCC init postcore so that users of this mailbox
830 * such as the ACPI Processor driver have it available
831 * at their init.
832 */
833postcore_initcall(pcc_init);