Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Amlogic SD/eMMC driver for the GX/S905 family SoCs
4 *
5 * Copyright (c) 2016 BayLibre, SAS.
6 * Author: Kevin Hilman <khilman@baylibre.com>
7 */
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/init.h>
11#include <linux/delay.h>
12#include <linux/device.h>
13#include <linux/iopoll.h>
14#include <linux/of_device.h>
15#include <linux/platform_device.h>
16#include <linux/ioport.h>
17#include <linux/dma-mapping.h>
18#include <linux/mmc/host.h>
19#include <linux/mmc/mmc.h>
20#include <linux/mmc/sdio.h>
21#include <linux/mmc/slot-gpio.h>
22#include <linux/io.h>
23#include <linux/clk.h>
24#include <linux/clk-provider.h>
25#include <linux/regulator/consumer.h>
26#include <linux/reset.h>
27#include <linux/interrupt.h>
28#include <linux/bitfield.h>
29#include <linux/pinctrl/consumer.h>
30
31#define DRIVER_NAME "meson-gx-mmc"
32
33#define SD_EMMC_CLOCK 0x0
34#define CLK_DIV_MASK GENMASK(5, 0)
35#define CLK_SRC_MASK GENMASK(7, 6)
36#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
37#define CLK_TX_PHASE_MASK GENMASK(11, 10)
38#define CLK_RX_PHASE_MASK GENMASK(13, 12)
39#define CLK_PHASE_0 0
40#define CLK_PHASE_180 2
41#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
42#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
43#define CLK_V2_ALWAYS_ON BIT(24)
44#define CLK_V2_IRQ_SDIO_SLEEP BIT(25)
45
46#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
47#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
48#define CLK_V3_ALWAYS_ON BIT(28)
49#define CLK_V3_IRQ_SDIO_SLEEP BIT(29)
50
51#define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask)
52#define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask)
53#define CLK_ALWAYS_ON(h) (h->data->always_on)
54#define CLK_IRQ_SDIO_SLEEP(h) (h->data->irq_sdio_sleep)
55
56#define SD_EMMC_DELAY 0x4
57#define SD_EMMC_ADJUST 0x8
58#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
59#define ADJUST_DS_EN BIT(15)
60#define ADJUST_ADJ_EN BIT(13)
61
62#define SD_EMMC_DELAY1 0x4
63#define SD_EMMC_DELAY2 0x8
64#define SD_EMMC_V3_ADJUST 0xc
65
66#define SD_EMMC_CALOUT 0x10
67#define SD_EMMC_START 0x40
68#define START_DESC_INIT BIT(0)
69#define START_DESC_BUSY BIT(1)
70#define START_DESC_ADDR_MASK GENMASK(31, 2)
71
72#define SD_EMMC_CFG 0x44
73#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
74#define CFG_BUS_WIDTH_1 0x0
75#define CFG_BUS_WIDTH_4 0x1
76#define CFG_BUS_WIDTH_8 0x2
77#define CFG_DDR BIT(2)
78#define CFG_BLK_LEN_MASK GENMASK(7, 4)
79#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
80#define CFG_RC_CC_MASK GENMASK(15, 12)
81#define CFG_STOP_CLOCK BIT(22)
82#define CFG_CLK_ALWAYS_ON BIT(18)
83#define CFG_CHK_DS BIT(20)
84#define CFG_AUTO_CLK BIT(23)
85#define CFG_ERR_ABORT BIT(27)
86
87#define SD_EMMC_STATUS 0x48
88#define STATUS_BUSY BIT(31)
89#define STATUS_DESC_BUSY BIT(30)
90#define STATUS_DATI GENMASK(23, 16)
91
92#define SD_EMMC_IRQ_EN 0x4c
93#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
94#define IRQ_TXD_ERR BIT(8)
95#define IRQ_DESC_ERR BIT(9)
96#define IRQ_RESP_ERR BIT(10)
97#define IRQ_CRC_ERR \
98 (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
99#define IRQ_RESP_TIMEOUT BIT(11)
100#define IRQ_DESC_TIMEOUT BIT(12)
101#define IRQ_TIMEOUTS \
102 (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
103#define IRQ_END_OF_CHAIN BIT(13)
104#define IRQ_RESP_STATUS BIT(14)
105#define IRQ_SDIO BIT(15)
106#define IRQ_EN_MASK \
107 (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN)
108
109#define SD_EMMC_CMD_CFG 0x50
110#define SD_EMMC_CMD_ARG 0x54
111#define SD_EMMC_CMD_DAT 0x58
112#define SD_EMMC_CMD_RSP 0x5c
113#define SD_EMMC_CMD_RSP1 0x60
114#define SD_EMMC_CMD_RSP2 0x64
115#define SD_EMMC_CMD_RSP3 0x68
116
117#define SD_EMMC_RXD 0x94
118#define SD_EMMC_TXD 0x94
119#define SD_EMMC_LAST_REG SD_EMMC_TXD
120
121#define SD_EMMC_SRAM_DATA_BUF_LEN 1536
122#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200
123
124#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
125#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
126#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
127#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
128#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
129#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
130
131#define SD_EMMC_PRE_REQ_DONE BIT(0)
132#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
133
134#define MUX_CLK_NUM_PARENTS 2
135
136struct meson_mmc_data {
137 unsigned int tx_delay_mask;
138 unsigned int rx_delay_mask;
139 unsigned int always_on;
140 unsigned int adjust;
141 unsigned int irq_sdio_sleep;
142};
143
144struct sd_emmc_desc {
145 u32 cmd_cfg;
146 u32 cmd_arg;
147 u32 cmd_data;
148 u32 cmd_resp;
149};
150
151struct meson_host {
152 struct device *dev;
153 struct meson_mmc_data *data;
154 struct mmc_host *mmc;
155 struct mmc_command *cmd;
156
157 void __iomem *regs;
158 struct clk *core_clk;
159 struct clk *mux_clk;
160 struct clk *mmc_clk;
161 unsigned long req_rate;
162 bool ddr;
163
164 bool dram_access_quirk;
165
166 struct pinctrl *pinctrl;
167 struct pinctrl_state *pins_clk_gate;
168
169 unsigned int bounce_buf_size;
170 void *bounce_buf;
171 void __iomem *bounce_iomem_buf;
172 dma_addr_t bounce_dma_addr;
173 struct sd_emmc_desc *descs;
174 dma_addr_t descs_dma_addr;
175
176 int irq;
177
178 bool vqmmc_enabled;
179 bool needs_pre_post_req;
180
181 spinlock_t lock;
182};
183
184#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
185#define CMD_CFG_BLOCK_MODE BIT(9)
186#define CMD_CFG_R1B BIT(10)
187#define CMD_CFG_END_OF_CHAIN BIT(11)
188#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
189#define CMD_CFG_NO_RESP BIT(16)
190#define CMD_CFG_NO_CMD BIT(17)
191#define CMD_CFG_DATA_IO BIT(18)
192#define CMD_CFG_DATA_WR BIT(19)
193#define CMD_CFG_RESP_NOCRC BIT(20)
194#define CMD_CFG_RESP_128 BIT(21)
195#define CMD_CFG_RESP_NUM BIT(22)
196#define CMD_CFG_DATA_NUM BIT(23)
197#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
198#define CMD_CFG_ERROR BIT(30)
199#define CMD_CFG_OWNER BIT(31)
200
201#define CMD_DATA_MASK GENMASK(31, 2)
202#define CMD_DATA_BIG_ENDIAN BIT(1)
203#define CMD_DATA_SRAM BIT(0)
204#define CMD_RESP_MASK GENMASK(31, 1)
205#define CMD_RESP_SRAM BIT(0)
206
207static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
208{
209 unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
210
211 if (!timeout)
212 return SD_EMMC_CMD_TIMEOUT_DATA;
213
214 timeout = roundup_pow_of_two(timeout);
215
216 return min(timeout, 32768U); /* max. 2^15 ms */
217}
218
219static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
220{
221 if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
222 return cmd->mrq->cmd;
223 else if (mmc_op_multi(cmd->opcode) &&
224 (!cmd->mrq->sbc || cmd->error || cmd->data->error))
225 return cmd->mrq->stop;
226 else
227 return NULL;
228}
229
230static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
231 struct mmc_request *mrq)
232{
233 struct meson_host *host = mmc_priv(mmc);
234 struct mmc_data *data = mrq->data;
235 struct scatterlist *sg;
236 int i;
237
238 /*
239 * When Controller DMA cannot directly access DDR memory, disable
240 * support for Chain Mode to directly use the internal SRAM using
241 * the bounce buffer mode.
242 */
243 if (host->dram_access_quirk)
244 return;
245
246 /* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */
247 if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) {
248 /*
249 * In block mode DMA descriptor format, "length" field indicates
250 * number of blocks and there is no way to pass DMA size that
251 * is not multiple of SDIO block size, making it impossible to
252 * tie more than one memory buffer with single SDIO block.
253 * Block mode sg buffer size should be aligned with SDIO block
254 * size, otherwise chain mode could not be used.
255 */
256 for_each_sg(data->sg, sg, data->sg_len, i) {
257 if (sg->length % data->blksz) {
258 dev_warn_once(mmc_dev(mmc),
259 "unaligned sg len %u blksize %u, disabling descriptor DMA for transfer\n",
260 sg->length, data->blksz);
261 return;
262 }
263 }
264 }
265
266 for_each_sg(data->sg, sg, data->sg_len, i) {
267 /* check for 8 byte alignment */
268 if (sg->offset % 8) {
269 dev_warn_once(mmc_dev(mmc),
270 "unaligned sg offset %u, disabling descriptor DMA for transfer\n",
271 sg->offset);
272 return;
273 }
274 }
275
276 data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
277}
278
279static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
280{
281 return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
282}
283
284static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
285{
286 return data && data->flags & MMC_DATA_READ &&
287 !meson_mmc_desc_chain_mode(data);
288}
289
290static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
291{
292 struct mmc_data *data = mrq->data;
293
294 if (!data)
295 return;
296
297 meson_mmc_get_transfer_mode(mmc, mrq);
298 data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
299
300 if (!meson_mmc_desc_chain_mode(data))
301 return;
302
303 data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
304 mmc_get_dma_dir(data));
305 if (!data->sg_count)
306 dev_err(mmc_dev(mmc), "dma_map_sg failed");
307}
308
309static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
310 int err)
311{
312 struct mmc_data *data = mrq->data;
313
314 if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
315 dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
316 mmc_get_dma_dir(data));
317}
318
319/*
320 * Gating the clock on this controller is tricky. It seems the mmc clock
321 * is also used by the controller. It may crash during some operation if the
322 * clock is stopped. The safest thing to do, whenever possible, is to keep
323 * clock running at stop it at the pad using the pinmux.
324 */
325static void meson_mmc_clk_gate(struct meson_host *host)
326{
327 u32 cfg;
328
329 if (host->pins_clk_gate) {
330 pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
331 } else {
332 /*
333 * If the pinmux is not provided - default to the classic and
334 * unsafe method
335 */
336 cfg = readl(host->regs + SD_EMMC_CFG);
337 cfg |= CFG_STOP_CLOCK;
338 writel(cfg, host->regs + SD_EMMC_CFG);
339 }
340}
341
342static void meson_mmc_clk_ungate(struct meson_host *host)
343{
344 u32 cfg;
345
346 if (host->pins_clk_gate)
347 pinctrl_select_default_state(host->dev);
348
349 /* Make sure the clock is not stopped in the controller */
350 cfg = readl(host->regs + SD_EMMC_CFG);
351 cfg &= ~CFG_STOP_CLOCK;
352 writel(cfg, host->regs + SD_EMMC_CFG);
353}
354
355static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate,
356 bool ddr)
357{
358 struct mmc_host *mmc = host->mmc;
359 int ret;
360 u32 cfg;
361
362 /* Same request - bail-out */
363 if (host->ddr == ddr && host->req_rate == rate)
364 return 0;
365
366 /* stop clock */
367 meson_mmc_clk_gate(host);
368 host->req_rate = 0;
369 mmc->actual_clock = 0;
370
371 /* return with clock being stopped */
372 if (!rate)
373 return 0;
374
375 /* Stop the clock during rate change to avoid glitches */
376 cfg = readl(host->regs + SD_EMMC_CFG);
377 cfg |= CFG_STOP_CLOCK;
378 writel(cfg, host->regs + SD_EMMC_CFG);
379
380 if (ddr) {
381 /* DDR modes require higher module clock */
382 rate <<= 1;
383 cfg |= CFG_DDR;
384 } else {
385 cfg &= ~CFG_DDR;
386 }
387 writel(cfg, host->regs + SD_EMMC_CFG);
388 host->ddr = ddr;
389
390 ret = clk_set_rate(host->mmc_clk, rate);
391 if (ret) {
392 dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
393 rate, ret);
394 return ret;
395 }
396
397 host->req_rate = rate;
398 mmc->actual_clock = clk_get_rate(host->mmc_clk);
399
400 /* We should report the real output frequency of the controller */
401 if (ddr) {
402 host->req_rate >>= 1;
403 mmc->actual_clock >>= 1;
404 }
405
406 dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
407 if (rate != mmc->actual_clock)
408 dev_dbg(host->dev, "requested rate was %lu\n", rate);
409
410 /* (re)start clock */
411 meson_mmc_clk_ungate(host);
412
413 return 0;
414}
415
416/*
417 * The SD/eMMC IP block has an internal mux and divider used for
418 * generating the MMC clock. Use the clock framework to create and
419 * manage these clocks.
420 */
421static int meson_mmc_clk_init(struct meson_host *host)
422{
423 struct clk_init_data init;
424 struct clk_mux *mux;
425 struct clk_divider *div;
426 char clk_name[32];
427 int i, ret = 0;
428 const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
429 const char *clk_parent[1];
430 u32 clk_reg;
431
432 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
433 clk_reg = CLK_ALWAYS_ON(host);
434 clk_reg |= CLK_DIV_MASK;
435 clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
436 clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
437 clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
438 if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
439 clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
440 writel(clk_reg, host->regs + SD_EMMC_CLOCK);
441
442 /* get the mux parents */
443 for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
444 struct clk *clk;
445 char name[16];
446
447 snprintf(name, sizeof(name), "clkin%d", i);
448 clk = devm_clk_get(host->dev, name);
449 if (IS_ERR(clk))
450 return dev_err_probe(host->dev, PTR_ERR(clk),
451 "Missing clock %s\n", name);
452
453 mux_parent_names[i] = __clk_get_name(clk);
454 }
455
456 /* create the mux */
457 mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
458 if (!mux)
459 return -ENOMEM;
460
461 snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
462 init.name = clk_name;
463 init.ops = &clk_mux_ops;
464 init.flags = 0;
465 init.parent_names = mux_parent_names;
466 init.num_parents = MUX_CLK_NUM_PARENTS;
467
468 mux->reg = host->regs + SD_EMMC_CLOCK;
469 mux->shift = __ffs(CLK_SRC_MASK);
470 mux->mask = CLK_SRC_MASK >> mux->shift;
471 mux->hw.init = &init;
472
473 host->mux_clk = devm_clk_register(host->dev, &mux->hw);
474 if (WARN_ON(IS_ERR(host->mux_clk)))
475 return PTR_ERR(host->mux_clk);
476
477 /* create the divider */
478 div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
479 if (!div)
480 return -ENOMEM;
481
482 snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
483 init.name = clk_name;
484 init.ops = &clk_divider_ops;
485 init.flags = CLK_SET_RATE_PARENT;
486 clk_parent[0] = __clk_get_name(host->mux_clk);
487 init.parent_names = clk_parent;
488 init.num_parents = 1;
489
490 div->reg = host->regs + SD_EMMC_CLOCK;
491 div->shift = __ffs(CLK_DIV_MASK);
492 div->width = __builtin_popcountl(CLK_DIV_MASK);
493 div->hw.init = &init;
494 div->flags = CLK_DIVIDER_ONE_BASED;
495
496 host->mmc_clk = devm_clk_register(host->dev, &div->hw);
497 if (WARN_ON(IS_ERR(host->mmc_clk)))
498 return PTR_ERR(host->mmc_clk);
499
500 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
501 host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
502 ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
503 if (ret)
504 return ret;
505
506 return clk_prepare_enable(host->mmc_clk);
507}
508
509static void meson_mmc_disable_resampling(struct meson_host *host)
510{
511 unsigned int val = readl(host->regs + host->data->adjust);
512
513 val &= ~ADJUST_ADJ_EN;
514 writel(val, host->regs + host->data->adjust);
515}
516
517static void meson_mmc_reset_resampling(struct meson_host *host)
518{
519 unsigned int val;
520
521 meson_mmc_disable_resampling(host);
522
523 val = readl(host->regs + host->data->adjust);
524 val &= ~ADJUST_ADJ_DELAY_MASK;
525 writel(val, host->regs + host->data->adjust);
526}
527
528static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode)
529{
530 struct meson_host *host = mmc_priv(mmc);
531 unsigned int val, dly, max_dly, i;
532 int ret;
533
534 /* Resampling is done using the source clock */
535 max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk),
536 clk_get_rate(host->mmc_clk));
537
538 val = readl(host->regs + host->data->adjust);
539 val |= ADJUST_ADJ_EN;
540 writel(val, host->regs + host->data->adjust);
541
542 if (mmc_doing_retune(mmc))
543 dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1;
544 else
545 dly = 0;
546
547 for (i = 0; i < max_dly; i++) {
548 val &= ~ADJUST_ADJ_DELAY_MASK;
549 val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly);
550 writel(val, host->regs + host->data->adjust);
551
552 ret = mmc_send_tuning(mmc, opcode, NULL);
553 if (!ret) {
554 dev_dbg(mmc_dev(mmc), "resampling delay: %u\n",
555 (dly + i) % max_dly);
556 return 0;
557 }
558 }
559
560 meson_mmc_reset_resampling(host);
561 return -EIO;
562}
563
564static int meson_mmc_prepare_ios_clock(struct meson_host *host,
565 struct mmc_ios *ios)
566{
567 bool ddr;
568
569 switch (ios->timing) {
570 case MMC_TIMING_MMC_DDR52:
571 case MMC_TIMING_UHS_DDR50:
572 ddr = true;
573 break;
574
575 default:
576 ddr = false;
577 break;
578 }
579
580 return meson_mmc_clk_set(host, ios->clock, ddr);
581}
582
583static void meson_mmc_check_resampling(struct meson_host *host,
584 struct mmc_ios *ios)
585{
586 switch (ios->timing) {
587 case MMC_TIMING_LEGACY:
588 case MMC_TIMING_MMC_HS:
589 case MMC_TIMING_SD_HS:
590 case MMC_TIMING_MMC_DDR52:
591 meson_mmc_disable_resampling(host);
592 break;
593 }
594}
595
596static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
597{
598 struct meson_host *host = mmc_priv(mmc);
599 u32 bus_width, val;
600 int err;
601
602 /*
603 * GPIO regulator, only controls switching between 1v8 and
604 * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
605 */
606 switch (ios->power_mode) {
607 case MMC_POWER_OFF:
608 if (!IS_ERR(mmc->supply.vmmc))
609 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
610
611 if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
612 regulator_disable(mmc->supply.vqmmc);
613 host->vqmmc_enabled = false;
614 }
615
616 break;
617
618 case MMC_POWER_UP:
619 if (!IS_ERR(mmc->supply.vmmc))
620 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
621
622 break;
623
624 case MMC_POWER_ON:
625 if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
626 int ret = regulator_enable(mmc->supply.vqmmc);
627
628 if (ret < 0)
629 dev_err(host->dev,
630 "failed to enable vqmmc regulator\n");
631 else
632 host->vqmmc_enabled = true;
633 }
634
635 break;
636 }
637
638 /* Bus width */
639 switch (ios->bus_width) {
640 case MMC_BUS_WIDTH_1:
641 bus_width = CFG_BUS_WIDTH_1;
642 break;
643 case MMC_BUS_WIDTH_4:
644 bus_width = CFG_BUS_WIDTH_4;
645 break;
646 case MMC_BUS_WIDTH_8:
647 bus_width = CFG_BUS_WIDTH_8;
648 break;
649 default:
650 dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
651 ios->bus_width);
652 bus_width = CFG_BUS_WIDTH_4;
653 }
654
655 val = readl(host->regs + SD_EMMC_CFG);
656 val &= ~CFG_BUS_WIDTH_MASK;
657 val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
658 writel(val, host->regs + SD_EMMC_CFG);
659
660 meson_mmc_check_resampling(host, ios);
661 err = meson_mmc_prepare_ios_clock(host, ios);
662 if (err)
663 dev_err(host->dev, "Failed to set clock: %d\n,", err);
664
665 dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val);
666}
667
668static void meson_mmc_request_done(struct mmc_host *mmc,
669 struct mmc_request *mrq)
670{
671 struct meson_host *host = mmc_priv(mmc);
672
673 host->cmd = NULL;
674 if (host->needs_pre_post_req)
675 meson_mmc_post_req(mmc, mrq, 0);
676 mmc_request_done(host->mmc, mrq);
677}
678
679static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
680{
681 struct meson_host *host = mmc_priv(mmc);
682 u32 cfg, blksz_old;
683
684 cfg = readl(host->regs + SD_EMMC_CFG);
685 blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
686
687 if (!is_power_of_2(blksz))
688 dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
689
690 blksz = ilog2(blksz);
691
692 /* check if block-size matches, if not update */
693 if (blksz == blksz_old)
694 return;
695
696 dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
697 blksz_old, blksz);
698
699 cfg &= ~CFG_BLK_LEN_MASK;
700 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
701 writel(cfg, host->regs + SD_EMMC_CFG);
702}
703
704static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
705{
706 if (cmd->flags & MMC_RSP_PRESENT) {
707 if (cmd->flags & MMC_RSP_136)
708 *cmd_cfg |= CMD_CFG_RESP_128;
709 *cmd_cfg |= CMD_CFG_RESP_NUM;
710
711 if (!(cmd->flags & MMC_RSP_CRC))
712 *cmd_cfg |= CMD_CFG_RESP_NOCRC;
713
714 if (cmd->flags & MMC_RSP_BUSY)
715 *cmd_cfg |= CMD_CFG_R1B;
716 } else {
717 *cmd_cfg |= CMD_CFG_NO_RESP;
718 }
719}
720
721static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
722{
723 struct meson_host *host = mmc_priv(mmc);
724 struct sd_emmc_desc *desc = host->descs;
725 struct mmc_data *data = host->cmd->data;
726 struct scatterlist *sg;
727 u32 start;
728 int i;
729
730 if (data->flags & MMC_DATA_WRITE)
731 cmd_cfg |= CMD_CFG_DATA_WR;
732
733 if (data->blocks > 1) {
734 cmd_cfg |= CMD_CFG_BLOCK_MODE;
735 meson_mmc_set_blksz(mmc, data->blksz);
736 }
737
738 for_each_sg(data->sg, sg, data->sg_count, i) {
739 unsigned int len = sg_dma_len(sg);
740
741 if (data->blocks > 1)
742 len /= data->blksz;
743
744 desc[i].cmd_cfg = cmd_cfg;
745 desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
746 if (i > 0)
747 desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
748 desc[i].cmd_arg = host->cmd->arg;
749 desc[i].cmd_resp = 0;
750 desc[i].cmd_data = sg_dma_address(sg);
751 }
752 desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
753
754 dma_wmb(); /* ensure descriptor is written before kicked */
755 start = host->descs_dma_addr | START_DESC_BUSY;
756 writel(start, host->regs + SD_EMMC_START);
757}
758
759/* local sg copy for dram_access_quirk */
760static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
761 size_t buflen, bool to_buffer)
762{
763 unsigned int sg_flags = SG_MITER_ATOMIC;
764 struct scatterlist *sgl = data->sg;
765 unsigned int nents = data->sg_len;
766 struct sg_mapping_iter miter;
767 unsigned int offset = 0;
768
769 if (to_buffer)
770 sg_flags |= SG_MITER_FROM_SG;
771 else
772 sg_flags |= SG_MITER_TO_SG;
773
774 sg_miter_start(&miter, sgl, nents, sg_flags);
775
776 while ((offset < buflen) && sg_miter_next(&miter)) {
777 unsigned int buf_offset = 0;
778 unsigned int len, left;
779 u32 *buf = miter.addr;
780
781 len = min(miter.length, buflen - offset);
782 left = len;
783
784 if (to_buffer) {
785 do {
786 writel(*buf++, host->bounce_iomem_buf + offset + buf_offset);
787
788 buf_offset += 4;
789 left -= 4;
790 } while (left);
791 } else {
792 do {
793 *buf++ = readl(host->bounce_iomem_buf + offset + buf_offset);
794
795 buf_offset += 4;
796 left -= 4;
797 } while (left);
798 }
799
800 offset += len;
801 }
802
803 sg_miter_stop(&miter);
804}
805
806static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
807{
808 struct meson_host *host = mmc_priv(mmc);
809 struct mmc_data *data = cmd->data;
810 u32 cmd_cfg = 0, cmd_data = 0;
811 unsigned int xfer_bytes = 0;
812
813 /* Setup descriptors */
814 dma_rmb();
815
816 host->cmd = cmd;
817
818 cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
819 cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
820 cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
821
822 meson_mmc_set_response_bits(cmd, &cmd_cfg);
823
824 /* data? */
825 if (data) {
826 data->bytes_xfered = 0;
827 cmd_cfg |= CMD_CFG_DATA_IO;
828 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
829 ilog2(meson_mmc_get_timeout_msecs(data)));
830
831 if (meson_mmc_desc_chain_mode(data)) {
832 meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
833 return;
834 }
835
836 if (data->blocks > 1) {
837 cmd_cfg |= CMD_CFG_BLOCK_MODE;
838 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
839 data->blocks);
840 meson_mmc_set_blksz(mmc, data->blksz);
841 } else {
842 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
843 }
844
845 xfer_bytes = data->blksz * data->blocks;
846 if (data->flags & MMC_DATA_WRITE) {
847 cmd_cfg |= CMD_CFG_DATA_WR;
848 WARN_ON(xfer_bytes > host->bounce_buf_size);
849 if (host->dram_access_quirk)
850 meson_mmc_copy_buffer(host, data, xfer_bytes, true);
851 else
852 sg_copy_to_buffer(data->sg, data->sg_len,
853 host->bounce_buf, xfer_bytes);
854 dma_wmb();
855 }
856
857 cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
858 } else {
859 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
860 ilog2(SD_EMMC_CMD_TIMEOUT));
861 }
862
863 /* Last descriptor */
864 cmd_cfg |= CMD_CFG_END_OF_CHAIN;
865 writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
866 writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
867 writel(0, host->regs + SD_EMMC_CMD_RSP);
868 wmb(); /* ensure descriptor is written before kicked */
869 writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
870}
871
872static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data)
873{
874 struct scatterlist *sg;
875 int i;
876
877 /* Reject request if any element offset or size is not 32bit aligned */
878 for_each_sg(data->sg, sg, data->sg_len, i) {
879 if (!IS_ALIGNED(sg->offset, sizeof(u32)) ||
880 !IS_ALIGNED(sg->length, sizeof(u32))) {
881 dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n",
882 data->sg->offset, data->sg->length);
883 return -EINVAL;
884 }
885 }
886
887 return 0;
888}
889
890static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
891{
892 struct meson_host *host = mmc_priv(mmc);
893 host->needs_pre_post_req = mrq->data &&
894 !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
895
896 /*
897 * The memory at the end of the controller used as bounce buffer for
898 * the dram_access_quirk only accepts 32bit read/write access,
899 * check the aligment and length of the data before starting the request.
900 */
901 if (host->dram_access_quirk && mrq->data) {
902 mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
903 if (mrq->cmd->error) {
904 mmc_request_done(mmc, mrq);
905 return;
906 }
907 }
908
909 if (host->needs_pre_post_req) {
910 meson_mmc_get_transfer_mode(mmc, mrq);
911 if (!meson_mmc_desc_chain_mode(mrq->data))
912 host->needs_pre_post_req = false;
913 }
914
915 if (host->needs_pre_post_req)
916 meson_mmc_pre_req(mmc, mrq);
917
918 /* Stop execution */
919 writel(0, host->regs + SD_EMMC_START);
920
921 meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
922}
923
924static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
925{
926 struct meson_host *host = mmc_priv(mmc);
927
928 if (cmd->flags & MMC_RSP_136) {
929 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
930 cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
931 cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
932 cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
933 } else if (cmd->flags & MMC_RSP_PRESENT) {
934 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
935 }
936}
937
938static void __meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
939{
940 struct meson_host *host = mmc_priv(mmc);
941 u32 reg_irqen = IRQ_EN_MASK;
942
943 if (enable)
944 reg_irqen |= IRQ_SDIO;
945 writel(reg_irqen, host->regs + SD_EMMC_IRQ_EN);
946}
947
948static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
949{
950 struct meson_host *host = dev_id;
951 struct mmc_command *cmd;
952 u32 status, raw_status, irq_mask = IRQ_EN_MASK;
953 irqreturn_t ret = IRQ_NONE;
954
955 if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
956 irq_mask |= IRQ_SDIO;
957 raw_status = readl(host->regs + SD_EMMC_STATUS);
958 status = raw_status & irq_mask;
959
960 if (!status) {
961 dev_dbg(host->dev,
962 "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
963 irq_mask, raw_status);
964 return IRQ_NONE;
965 }
966
967 if (WARN_ON(!host))
968 return IRQ_NONE;
969
970 /* ack all raised interrupts */
971 writel(status, host->regs + SD_EMMC_STATUS);
972
973 cmd = host->cmd;
974
975 if (status & IRQ_SDIO) {
976 spin_lock(&host->lock);
977 __meson_mmc_enable_sdio_irq(host->mmc, 0);
978 sdio_signal_irq(host->mmc);
979 spin_unlock(&host->lock);
980 status &= ~IRQ_SDIO;
981 if (!status)
982 return IRQ_HANDLED;
983 }
984
985 if (WARN_ON(!cmd))
986 return IRQ_NONE;
987
988 cmd->error = 0;
989 if (status & IRQ_CRC_ERR) {
990 dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
991 cmd->error = -EILSEQ;
992 ret = IRQ_WAKE_THREAD;
993 goto out;
994 }
995
996 if (status & IRQ_TIMEOUTS) {
997 dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
998 cmd->error = -ETIMEDOUT;
999 ret = IRQ_WAKE_THREAD;
1000 goto out;
1001 }
1002
1003 meson_mmc_read_resp(host->mmc, cmd);
1004
1005 if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
1006 struct mmc_data *data = cmd->data;
1007
1008 if (data && !cmd->error)
1009 data->bytes_xfered = data->blksz * data->blocks;
1010 if (meson_mmc_bounce_buf_read(data) ||
1011 meson_mmc_get_next_command(cmd))
1012 ret = IRQ_WAKE_THREAD;
1013 else
1014 ret = IRQ_HANDLED;
1015 }
1016
1017out:
1018 if (cmd->error) {
1019 /* Stop desc in case of errors */
1020 u32 start = readl(host->regs + SD_EMMC_START);
1021
1022 start &= ~START_DESC_BUSY;
1023 writel(start, host->regs + SD_EMMC_START);
1024 }
1025
1026 if (ret == IRQ_HANDLED)
1027 meson_mmc_request_done(host->mmc, cmd->mrq);
1028
1029 return ret;
1030}
1031
1032static int meson_mmc_wait_desc_stop(struct meson_host *host)
1033{
1034 u32 status;
1035
1036 /*
1037 * It may sometimes take a while for it to actually halt. Here, we
1038 * are giving it 5ms to comply
1039 *
1040 * If we don't confirm the descriptor is stopped, it might raise new
1041 * IRQs after we have called mmc_request_done() which is bad.
1042 */
1043
1044 return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status,
1045 !(status & (STATUS_BUSY | STATUS_DESC_BUSY)),
1046 100, 5000);
1047}
1048
1049static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
1050{
1051 struct meson_host *host = dev_id;
1052 struct mmc_command *next_cmd, *cmd = host->cmd;
1053 struct mmc_data *data;
1054 unsigned int xfer_bytes;
1055
1056 if (WARN_ON(!cmd))
1057 return IRQ_NONE;
1058
1059 if (cmd->error) {
1060 meson_mmc_wait_desc_stop(host);
1061 meson_mmc_request_done(host->mmc, cmd->mrq);
1062
1063 return IRQ_HANDLED;
1064 }
1065
1066 data = cmd->data;
1067 if (meson_mmc_bounce_buf_read(data)) {
1068 xfer_bytes = data->blksz * data->blocks;
1069 WARN_ON(xfer_bytes > host->bounce_buf_size);
1070 if (host->dram_access_quirk)
1071 meson_mmc_copy_buffer(host, data, xfer_bytes, false);
1072 else
1073 sg_copy_from_buffer(data->sg, data->sg_len,
1074 host->bounce_buf, xfer_bytes);
1075 }
1076
1077 next_cmd = meson_mmc_get_next_command(cmd);
1078 if (next_cmd)
1079 meson_mmc_start_cmd(host->mmc, next_cmd);
1080 else
1081 meson_mmc_request_done(host->mmc, cmd->mrq);
1082
1083 return IRQ_HANDLED;
1084}
1085
1086/*
1087 * NOTE: we only need this until the GPIO/pinctrl driver can handle
1088 * interrupts. For now, the MMC core will use this for polling.
1089 */
1090static int meson_mmc_get_cd(struct mmc_host *mmc)
1091{
1092 int status = mmc_gpio_get_cd(mmc);
1093
1094 if (status == -ENOSYS)
1095 return 1; /* assume present */
1096
1097 return status;
1098}
1099
1100static void meson_mmc_cfg_init(struct meson_host *host)
1101{
1102 u32 cfg = 0;
1103
1104 cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
1105 ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
1106 cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
1107 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
1108
1109 /* abort chain on R/W errors */
1110 cfg |= CFG_ERR_ABORT;
1111
1112 writel(cfg, host->regs + SD_EMMC_CFG);
1113}
1114
1115static int meson_mmc_card_busy(struct mmc_host *mmc)
1116{
1117 struct meson_host *host = mmc_priv(mmc);
1118 u32 regval;
1119
1120 regval = readl(host->regs + SD_EMMC_STATUS);
1121
1122 /* We are only interrested in lines 0 to 3, so mask the other ones */
1123 return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
1124}
1125
1126static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
1127{
1128 int ret;
1129
1130 /* vqmmc regulator is available */
1131 if (!IS_ERR(mmc->supply.vqmmc)) {
1132 /*
1133 * The usual amlogic setup uses a GPIO to switch from one
1134 * regulator to the other. While the voltage ramp up is
1135 * pretty fast, care must be taken when switching from 3.3v
1136 * to 1.8v. Please make sure the regulator framework is aware
1137 * of your own regulator constraints
1138 */
1139 ret = mmc_regulator_set_vqmmc(mmc, ios);
1140 return ret < 0 ? ret : 0;
1141 }
1142
1143 /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
1144 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1145 return 0;
1146
1147 return -EINVAL;
1148}
1149
1150static void meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
1151{
1152 struct meson_host *host = mmc_priv(mmc);
1153 unsigned long flags;
1154
1155 spin_lock_irqsave(&host->lock, flags);
1156 __meson_mmc_enable_sdio_irq(mmc, enable);
1157 spin_unlock_irqrestore(&host->lock, flags);
1158}
1159
1160static void meson_mmc_ack_sdio_irq(struct mmc_host *mmc)
1161{
1162 meson_mmc_enable_sdio_irq(mmc, 1);
1163}
1164
1165static const struct mmc_host_ops meson_mmc_ops = {
1166 .request = meson_mmc_request,
1167 .set_ios = meson_mmc_set_ios,
1168 .get_cd = meson_mmc_get_cd,
1169 .pre_req = meson_mmc_pre_req,
1170 .post_req = meson_mmc_post_req,
1171 .execute_tuning = meson_mmc_resampling_tuning,
1172 .card_busy = meson_mmc_card_busy,
1173 .start_signal_voltage_switch = meson_mmc_voltage_switch,
1174 .enable_sdio_irq = meson_mmc_enable_sdio_irq,
1175 .ack_sdio_irq = meson_mmc_ack_sdio_irq,
1176};
1177
1178static int meson_mmc_probe(struct platform_device *pdev)
1179{
1180 struct resource *res;
1181 struct meson_host *host;
1182 struct mmc_host *mmc;
1183 int ret;
1184
1185 mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
1186 if (!mmc)
1187 return -ENOMEM;
1188 host = mmc_priv(mmc);
1189 host->mmc = mmc;
1190 host->dev = &pdev->dev;
1191 dev_set_drvdata(&pdev->dev, host);
1192
1193 /* The G12A SDIO Controller needs an SRAM bounce buffer */
1194 host->dram_access_quirk = device_property_read_bool(&pdev->dev,
1195 "amlogic,dram-access-quirk");
1196
1197 /* Get regulators and the supported OCR mask */
1198 host->vqmmc_enabled = false;
1199 ret = mmc_regulator_get_supply(mmc);
1200 if (ret)
1201 goto free_host;
1202
1203 ret = mmc_of_parse(mmc);
1204 if (ret) {
1205 if (ret != -EPROBE_DEFER)
1206 dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
1207 goto free_host;
1208 }
1209
1210 mmc->caps |= MMC_CAP_CMD23;
1211
1212 if (mmc->caps & MMC_CAP_SDIO_IRQ)
1213 mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
1214
1215 host->data = (struct meson_mmc_data *)
1216 of_device_get_match_data(&pdev->dev);
1217 if (!host->data) {
1218 ret = -EINVAL;
1219 goto free_host;
1220 }
1221
1222 ret = device_reset_optional(&pdev->dev);
1223 if (ret) {
1224 dev_err_probe(&pdev->dev, ret, "device reset failed\n");
1225 goto free_host;
1226 }
1227
1228 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1229 host->regs = devm_ioremap_resource(&pdev->dev, res);
1230 if (IS_ERR(host->regs)) {
1231 ret = PTR_ERR(host->regs);
1232 goto free_host;
1233 }
1234
1235 host->irq = platform_get_irq(pdev, 0);
1236 if (host->irq <= 0) {
1237 ret = -EINVAL;
1238 goto free_host;
1239 }
1240
1241 host->pinctrl = devm_pinctrl_get(&pdev->dev);
1242 if (IS_ERR(host->pinctrl)) {
1243 ret = PTR_ERR(host->pinctrl);
1244 goto free_host;
1245 }
1246
1247 host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
1248 "clk-gate");
1249 if (IS_ERR(host->pins_clk_gate)) {
1250 dev_warn(&pdev->dev,
1251 "can't get clk-gate pinctrl, using clk_stop bit\n");
1252 host->pins_clk_gate = NULL;
1253 }
1254
1255 host->core_clk = devm_clk_get(&pdev->dev, "core");
1256 if (IS_ERR(host->core_clk)) {
1257 ret = PTR_ERR(host->core_clk);
1258 goto free_host;
1259 }
1260
1261 ret = clk_prepare_enable(host->core_clk);
1262 if (ret)
1263 goto free_host;
1264
1265 ret = meson_mmc_clk_init(host);
1266 if (ret)
1267 goto err_core_clk;
1268
1269 /* set config to sane default */
1270 meson_mmc_cfg_init(host);
1271
1272 /* Stop execution */
1273 writel(0, host->regs + SD_EMMC_START);
1274
1275 /* clear, ack and enable interrupts */
1276 writel(0, host->regs + SD_EMMC_IRQ_EN);
1277 writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
1278 writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
1279
1280 ret = request_threaded_irq(host->irq, meson_mmc_irq,
1281 meson_mmc_irq_thread, IRQF_ONESHOT,
1282 dev_name(&pdev->dev), host);
1283 if (ret)
1284 goto err_init_clk;
1285
1286 spin_lock_init(&host->lock);
1287
1288 if (host->dram_access_quirk) {
1289 /* Limit segments to 1 due to low available sram memory */
1290 mmc->max_segs = 1;
1291 /* Limit to the available sram memory */
1292 mmc->max_blk_count = SD_EMMC_SRAM_DATA_BUF_LEN /
1293 mmc->max_blk_size;
1294 } else {
1295 mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
1296 mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
1297 sizeof(struct sd_emmc_desc);
1298 }
1299 mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
1300 mmc->max_seg_size = mmc->max_req_size;
1301
1302 /*
1303 * At the moment, we don't know how to reliably enable HS400.
1304 * From the different datasheets, it is not even clear if this mode
1305 * is officially supported by any of the SoCs
1306 */
1307 mmc->caps2 &= ~MMC_CAP2_HS400;
1308
1309 if (host->dram_access_quirk) {
1310 /*
1311 * The MMC Controller embeds 1,5KiB of internal SRAM
1312 * that can be used to be used as bounce buffer.
1313 * In the case of the G12A SDIO controller, use these
1314 * instead of the DDR memory
1315 */
1316 host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
1317 host->bounce_iomem_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
1318 host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
1319 } else {
1320 /* data bounce buffer */
1321 host->bounce_buf_size = mmc->max_req_size;
1322 host->bounce_buf =
1323 dmam_alloc_coherent(host->dev, host->bounce_buf_size,
1324 &host->bounce_dma_addr, GFP_KERNEL);
1325 if (host->bounce_buf == NULL) {
1326 dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
1327 ret = -ENOMEM;
1328 goto err_free_irq;
1329 }
1330 }
1331
1332 host->descs = dmam_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1333 &host->descs_dma_addr, GFP_KERNEL);
1334 if (!host->descs) {
1335 dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
1336 ret = -ENOMEM;
1337 goto err_free_irq;
1338 }
1339
1340 mmc->ops = &meson_mmc_ops;
1341 ret = mmc_add_host(mmc);
1342 if (ret)
1343 goto err_free_irq;
1344
1345 return 0;
1346
1347err_free_irq:
1348 free_irq(host->irq, host);
1349err_init_clk:
1350 clk_disable_unprepare(host->mmc_clk);
1351err_core_clk:
1352 clk_disable_unprepare(host->core_clk);
1353free_host:
1354 mmc_free_host(mmc);
1355 return ret;
1356}
1357
1358static int meson_mmc_remove(struct platform_device *pdev)
1359{
1360 struct meson_host *host = dev_get_drvdata(&pdev->dev);
1361
1362 mmc_remove_host(host->mmc);
1363
1364 /* disable interrupts */
1365 writel(0, host->regs + SD_EMMC_IRQ_EN);
1366 free_irq(host->irq, host);
1367
1368 clk_disable_unprepare(host->mmc_clk);
1369 clk_disable_unprepare(host->core_clk);
1370
1371 mmc_free_host(host->mmc);
1372 return 0;
1373}
1374
1375static const struct meson_mmc_data meson_gx_data = {
1376 .tx_delay_mask = CLK_V2_TX_DELAY_MASK,
1377 .rx_delay_mask = CLK_V2_RX_DELAY_MASK,
1378 .always_on = CLK_V2_ALWAYS_ON,
1379 .adjust = SD_EMMC_ADJUST,
1380 .irq_sdio_sleep = CLK_V2_IRQ_SDIO_SLEEP,
1381};
1382
1383static const struct meson_mmc_data meson_axg_data = {
1384 .tx_delay_mask = CLK_V3_TX_DELAY_MASK,
1385 .rx_delay_mask = CLK_V3_RX_DELAY_MASK,
1386 .always_on = CLK_V3_ALWAYS_ON,
1387 .adjust = SD_EMMC_V3_ADJUST,
1388 .irq_sdio_sleep = CLK_V3_IRQ_SDIO_SLEEP,
1389};
1390
1391static const struct of_device_id meson_mmc_of_match[] = {
1392 { .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data },
1393 { .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data },
1394 { .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data },
1395 { .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data },
1396 { .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data },
1397 {}
1398};
1399MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
1400
1401static struct platform_driver meson_mmc_driver = {
1402 .probe = meson_mmc_probe,
1403 .remove = meson_mmc_remove,
1404 .driver = {
1405 .name = DRIVER_NAME,
1406 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
1407 .of_match_table = meson_mmc_of_match,
1408 },
1409};
1410
1411module_platform_driver(meson_mmc_driver);
1412
1413MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver");
1414MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
1415MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Amlogic SD/eMMC driver for the GX/S905 family SoCs
4 *
5 * Copyright (c) 2016 BayLibre, SAS.
6 * Author: Kevin Hilman <khilman@baylibre.com>
7 */
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/init.h>
11#include <linux/delay.h>
12#include <linux/device.h>
13#include <linux/iopoll.h>
14#include <linux/of.h>
15#include <linux/platform_device.h>
16#include <linux/ioport.h>
17#include <linux/dma-mapping.h>
18#include <linux/mmc/host.h>
19#include <linux/mmc/mmc.h>
20#include <linux/mmc/sdio.h>
21#include <linux/mmc/slot-gpio.h>
22#include <linux/io.h>
23#include <linux/clk.h>
24#include <linux/clk-provider.h>
25#include <linux/regulator/consumer.h>
26#include <linux/reset.h>
27#include <linux/interrupt.h>
28#include <linux/bitfield.h>
29#include <linux/pinctrl/consumer.h>
30
31#define DRIVER_NAME "meson-gx-mmc"
32
33#define SD_EMMC_CLOCK 0x0
34#define CLK_DIV_MASK GENMASK(5, 0)
35#define CLK_SRC_MASK GENMASK(7, 6)
36#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
37#define CLK_TX_PHASE_MASK GENMASK(11, 10)
38#define CLK_RX_PHASE_MASK GENMASK(13, 12)
39#define CLK_PHASE_0 0
40#define CLK_PHASE_180 2
41#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
42#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
43#define CLK_V2_ALWAYS_ON BIT(24)
44#define CLK_V2_IRQ_SDIO_SLEEP BIT(25)
45
46#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
47#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
48#define CLK_V3_ALWAYS_ON BIT(28)
49#define CLK_V3_IRQ_SDIO_SLEEP BIT(29)
50
51#define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask)
52#define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask)
53#define CLK_ALWAYS_ON(h) (h->data->always_on)
54#define CLK_IRQ_SDIO_SLEEP(h) (h->data->irq_sdio_sleep)
55
56#define SD_EMMC_DELAY 0x4
57#define SD_EMMC_ADJUST 0x8
58#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
59#define ADJUST_DS_EN BIT(15)
60#define ADJUST_ADJ_EN BIT(13)
61
62#define SD_EMMC_DELAY1 0x4
63#define SD_EMMC_DELAY2 0x8
64#define SD_EMMC_V3_ADJUST 0xc
65
66#define SD_EMMC_CALOUT 0x10
67#define SD_EMMC_START 0x40
68#define START_DESC_INIT BIT(0)
69#define START_DESC_BUSY BIT(1)
70#define START_DESC_ADDR_MASK GENMASK(31, 2)
71
72#define SD_EMMC_CFG 0x44
73#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
74#define CFG_BUS_WIDTH_1 0x0
75#define CFG_BUS_WIDTH_4 0x1
76#define CFG_BUS_WIDTH_8 0x2
77#define CFG_DDR BIT(2)
78#define CFG_BLK_LEN_MASK GENMASK(7, 4)
79#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
80#define CFG_RC_CC_MASK GENMASK(15, 12)
81#define CFG_STOP_CLOCK BIT(22)
82#define CFG_CLK_ALWAYS_ON BIT(18)
83#define CFG_CHK_DS BIT(20)
84#define CFG_AUTO_CLK BIT(23)
85#define CFG_ERR_ABORT BIT(27)
86
87#define SD_EMMC_STATUS 0x48
88#define STATUS_BUSY BIT(31)
89#define STATUS_DESC_BUSY BIT(30)
90#define STATUS_DATI GENMASK(23, 16)
91
92#define SD_EMMC_IRQ_EN 0x4c
93#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
94#define IRQ_TXD_ERR BIT(8)
95#define IRQ_DESC_ERR BIT(9)
96#define IRQ_RESP_ERR BIT(10)
97#define IRQ_CRC_ERR \
98 (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
99#define IRQ_RESP_TIMEOUT BIT(11)
100#define IRQ_DESC_TIMEOUT BIT(12)
101#define IRQ_TIMEOUTS \
102 (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
103#define IRQ_END_OF_CHAIN BIT(13)
104#define IRQ_RESP_STATUS BIT(14)
105#define IRQ_SDIO BIT(15)
106#define IRQ_EN_MASK \
107 (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN)
108
109#define SD_EMMC_CMD_CFG 0x50
110#define SD_EMMC_CMD_ARG 0x54
111#define SD_EMMC_CMD_DAT 0x58
112#define SD_EMMC_CMD_RSP 0x5c
113#define SD_EMMC_CMD_RSP1 0x60
114#define SD_EMMC_CMD_RSP2 0x64
115#define SD_EMMC_CMD_RSP3 0x68
116
117#define SD_EMMC_RXD 0x94
118#define SD_EMMC_TXD 0x94
119#define SD_EMMC_LAST_REG SD_EMMC_TXD
120
121#define SD_EMMC_SRAM_DATA_BUF_LEN 1536
122#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200
123
124#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
125#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
126#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
127#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
128#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
129#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
130
131#define SD_EMMC_PRE_REQ_DONE BIT(0)
132#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
133
134#define MUX_CLK_NUM_PARENTS 2
135
136struct meson_mmc_data {
137 unsigned int tx_delay_mask;
138 unsigned int rx_delay_mask;
139 unsigned int always_on;
140 unsigned int adjust;
141 unsigned int irq_sdio_sleep;
142};
143
144struct sd_emmc_desc {
145 u32 cmd_cfg;
146 u32 cmd_arg;
147 u32 cmd_data;
148 u32 cmd_resp;
149};
150
151struct meson_host {
152 struct device *dev;
153 const struct meson_mmc_data *data;
154 struct mmc_host *mmc;
155 struct mmc_command *cmd;
156
157 void __iomem *regs;
158 struct clk *mux_clk;
159 struct clk *mmc_clk;
160 unsigned long req_rate;
161 bool ddr;
162
163 bool dram_access_quirk;
164
165 struct pinctrl *pinctrl;
166 struct pinctrl_state *pins_clk_gate;
167
168 unsigned int bounce_buf_size;
169 void *bounce_buf;
170 void __iomem *bounce_iomem_buf;
171 dma_addr_t bounce_dma_addr;
172 struct sd_emmc_desc *descs;
173 dma_addr_t descs_dma_addr;
174
175 int irq;
176
177 bool needs_pre_post_req;
178
179 spinlock_t lock;
180};
181
182#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
183#define CMD_CFG_BLOCK_MODE BIT(9)
184#define CMD_CFG_R1B BIT(10)
185#define CMD_CFG_END_OF_CHAIN BIT(11)
186#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
187#define CMD_CFG_NO_RESP BIT(16)
188#define CMD_CFG_NO_CMD BIT(17)
189#define CMD_CFG_DATA_IO BIT(18)
190#define CMD_CFG_DATA_WR BIT(19)
191#define CMD_CFG_RESP_NOCRC BIT(20)
192#define CMD_CFG_RESP_128 BIT(21)
193#define CMD_CFG_RESP_NUM BIT(22)
194#define CMD_CFG_DATA_NUM BIT(23)
195#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
196#define CMD_CFG_ERROR BIT(30)
197#define CMD_CFG_OWNER BIT(31)
198
199#define CMD_DATA_MASK GENMASK(31, 2)
200#define CMD_DATA_BIG_ENDIAN BIT(1)
201#define CMD_DATA_SRAM BIT(0)
202#define CMD_RESP_MASK GENMASK(31, 1)
203#define CMD_RESP_SRAM BIT(0)
204
205static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
206{
207 unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
208
209 if (!timeout)
210 return SD_EMMC_CMD_TIMEOUT_DATA;
211
212 timeout = roundup_pow_of_two(timeout);
213
214 return min(timeout, 32768U); /* max. 2^15 ms */
215}
216
217static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
218{
219 if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
220 return cmd->mrq->cmd;
221 else if (mmc_op_multi(cmd->opcode) &&
222 (!cmd->mrq->sbc || cmd->error || cmd->data->error))
223 return cmd->mrq->stop;
224 else
225 return NULL;
226}
227
228static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
229 struct mmc_request *mrq)
230{
231 struct meson_host *host = mmc_priv(mmc);
232 struct mmc_data *data = mrq->data;
233 struct scatterlist *sg;
234 int i;
235
236 /*
237 * When Controller DMA cannot directly access DDR memory, disable
238 * support for Chain Mode to directly use the internal SRAM using
239 * the bounce buffer mode.
240 */
241 if (host->dram_access_quirk)
242 return;
243
244 /* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */
245 if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) {
246 /*
247 * In block mode DMA descriptor format, "length" field indicates
248 * number of blocks and there is no way to pass DMA size that
249 * is not multiple of SDIO block size, making it impossible to
250 * tie more than one memory buffer with single SDIO block.
251 * Block mode sg buffer size should be aligned with SDIO block
252 * size, otherwise chain mode could not be used.
253 */
254 for_each_sg(data->sg, sg, data->sg_len, i) {
255 if (sg->length % data->blksz) {
256 dev_warn_once(mmc_dev(mmc),
257 "unaligned sg len %u blksize %u, disabling descriptor DMA for transfer\n",
258 sg->length, data->blksz);
259 return;
260 }
261 }
262 }
263
264 for_each_sg(data->sg, sg, data->sg_len, i) {
265 /* check for 8 byte alignment */
266 if (sg->offset % 8) {
267 dev_warn_once(mmc_dev(mmc),
268 "unaligned sg offset %u, disabling descriptor DMA for transfer\n",
269 sg->offset);
270 return;
271 }
272 }
273
274 data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
275}
276
277static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
278{
279 return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
280}
281
282static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
283{
284 return data && data->flags & MMC_DATA_READ &&
285 !meson_mmc_desc_chain_mode(data);
286}
287
288static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
289{
290 struct mmc_data *data = mrq->data;
291
292 if (!data)
293 return;
294
295 meson_mmc_get_transfer_mode(mmc, mrq);
296 data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
297
298 if (!meson_mmc_desc_chain_mode(data))
299 return;
300
301 data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
302 mmc_get_dma_dir(data));
303 if (!data->sg_count)
304 dev_err(mmc_dev(mmc), "dma_map_sg failed");
305}
306
307static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
308 int err)
309{
310 struct mmc_data *data = mrq->data;
311
312 if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
313 dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
314 mmc_get_dma_dir(data));
315}
316
317/*
318 * Gating the clock on this controller is tricky. It seems the mmc clock
319 * is also used by the controller. It may crash during some operation if the
320 * clock is stopped. The safest thing to do, whenever possible, is to keep
321 * clock running at stop it at the pad using the pinmux.
322 */
323static void meson_mmc_clk_gate(struct meson_host *host)
324{
325 u32 cfg;
326
327 if (host->pins_clk_gate) {
328 pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
329 } else {
330 /*
331 * If the pinmux is not provided - default to the classic and
332 * unsafe method
333 */
334 cfg = readl(host->regs + SD_EMMC_CFG);
335 cfg |= CFG_STOP_CLOCK;
336 writel(cfg, host->regs + SD_EMMC_CFG);
337 }
338}
339
340static void meson_mmc_clk_ungate(struct meson_host *host)
341{
342 u32 cfg;
343
344 if (host->pins_clk_gate)
345 pinctrl_select_default_state(host->dev);
346
347 /* Make sure the clock is not stopped in the controller */
348 cfg = readl(host->regs + SD_EMMC_CFG);
349 cfg &= ~CFG_STOP_CLOCK;
350 writel(cfg, host->regs + SD_EMMC_CFG);
351}
352
353static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate,
354 bool ddr)
355{
356 struct mmc_host *mmc = host->mmc;
357 int ret;
358 u32 cfg;
359
360 /* Same request - bail-out */
361 if (host->ddr == ddr && host->req_rate == rate)
362 return 0;
363
364 /* stop clock */
365 meson_mmc_clk_gate(host);
366 host->req_rate = 0;
367 mmc->actual_clock = 0;
368
369 /* return with clock being stopped */
370 if (!rate)
371 return 0;
372
373 /* Stop the clock during rate change to avoid glitches */
374 cfg = readl(host->regs + SD_EMMC_CFG);
375 cfg |= CFG_STOP_CLOCK;
376 writel(cfg, host->regs + SD_EMMC_CFG);
377
378 if (ddr) {
379 /* DDR modes require higher module clock */
380 rate <<= 1;
381 cfg |= CFG_DDR;
382 } else {
383 cfg &= ~CFG_DDR;
384 }
385 writel(cfg, host->regs + SD_EMMC_CFG);
386 host->ddr = ddr;
387
388 ret = clk_set_rate(host->mmc_clk, rate);
389 if (ret) {
390 dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
391 rate, ret);
392 return ret;
393 }
394
395 host->req_rate = rate;
396 mmc->actual_clock = clk_get_rate(host->mmc_clk);
397
398 /* We should report the real output frequency of the controller */
399 if (ddr) {
400 host->req_rate >>= 1;
401 mmc->actual_clock >>= 1;
402 }
403
404 dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
405 if (rate != mmc->actual_clock)
406 dev_dbg(host->dev, "requested rate was %lu\n", rate);
407
408 /* (re)start clock */
409 meson_mmc_clk_ungate(host);
410
411 return 0;
412}
413
414/*
415 * The SD/eMMC IP block has an internal mux and divider used for
416 * generating the MMC clock. Use the clock framework to create and
417 * manage these clocks.
418 */
419static int meson_mmc_clk_init(struct meson_host *host)
420{
421 struct clk_init_data init;
422 struct clk_mux *mux;
423 struct clk_divider *div;
424 char clk_name[32];
425 int i, ret = 0;
426 const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
427 const char *clk_parent[1];
428 u32 clk_reg;
429
430 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
431 clk_reg = CLK_ALWAYS_ON(host);
432 clk_reg |= CLK_DIV_MASK;
433 clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
434 clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
435 clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
436 if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
437 clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
438 writel(clk_reg, host->regs + SD_EMMC_CLOCK);
439
440 /* get the mux parents */
441 for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
442 struct clk *clk;
443 char name[16];
444
445 snprintf(name, sizeof(name), "clkin%d", i);
446 clk = devm_clk_get(host->dev, name);
447 if (IS_ERR(clk))
448 return dev_err_probe(host->dev, PTR_ERR(clk),
449 "Missing clock %s\n", name);
450
451 mux_parent_names[i] = __clk_get_name(clk);
452 }
453
454 /* create the mux */
455 mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
456 if (!mux)
457 return -ENOMEM;
458
459 snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
460 init.name = clk_name;
461 init.ops = &clk_mux_ops;
462 init.flags = 0;
463 init.parent_names = mux_parent_names;
464 init.num_parents = MUX_CLK_NUM_PARENTS;
465
466 mux->reg = host->regs + SD_EMMC_CLOCK;
467 mux->shift = __ffs(CLK_SRC_MASK);
468 mux->mask = CLK_SRC_MASK >> mux->shift;
469 mux->hw.init = &init;
470
471 host->mux_clk = devm_clk_register(host->dev, &mux->hw);
472 if (WARN_ON(IS_ERR(host->mux_clk)))
473 return PTR_ERR(host->mux_clk);
474
475 /* create the divider */
476 div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
477 if (!div)
478 return -ENOMEM;
479
480 snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
481 init.name = clk_name;
482 init.ops = &clk_divider_ops;
483 init.flags = CLK_SET_RATE_PARENT;
484 clk_parent[0] = __clk_get_name(host->mux_clk);
485 init.parent_names = clk_parent;
486 init.num_parents = 1;
487
488 div->reg = host->regs + SD_EMMC_CLOCK;
489 div->shift = __ffs(CLK_DIV_MASK);
490 div->width = __builtin_popcountl(CLK_DIV_MASK);
491 div->hw.init = &init;
492 div->flags = CLK_DIVIDER_ONE_BASED;
493
494 host->mmc_clk = devm_clk_register(host->dev, &div->hw);
495 if (WARN_ON(IS_ERR(host->mmc_clk)))
496 return PTR_ERR(host->mmc_clk);
497
498 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
499 host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
500 ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
501 if (ret)
502 return ret;
503
504 return clk_prepare_enable(host->mmc_clk);
505}
506
507static void meson_mmc_disable_resampling(struct meson_host *host)
508{
509 unsigned int val = readl(host->regs + host->data->adjust);
510
511 val &= ~ADJUST_ADJ_EN;
512 writel(val, host->regs + host->data->adjust);
513}
514
515static void meson_mmc_reset_resampling(struct meson_host *host)
516{
517 unsigned int val;
518
519 meson_mmc_disable_resampling(host);
520
521 val = readl(host->regs + host->data->adjust);
522 val &= ~ADJUST_ADJ_DELAY_MASK;
523 writel(val, host->regs + host->data->adjust);
524}
525
526static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode)
527{
528 struct meson_host *host = mmc_priv(mmc);
529 unsigned int val, dly, max_dly, i;
530 int ret;
531
532 /* Resampling is done using the source clock */
533 max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk),
534 clk_get_rate(host->mmc_clk));
535
536 val = readl(host->regs + host->data->adjust);
537 val |= ADJUST_ADJ_EN;
538 writel(val, host->regs + host->data->adjust);
539
540 if (mmc_doing_retune(mmc))
541 dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1;
542 else
543 dly = 0;
544
545 for (i = 0; i < max_dly; i++) {
546 val &= ~ADJUST_ADJ_DELAY_MASK;
547 val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly);
548 writel(val, host->regs + host->data->adjust);
549
550 ret = mmc_send_tuning(mmc, opcode, NULL);
551 if (!ret) {
552 dev_dbg(mmc_dev(mmc), "resampling delay: %u\n",
553 (dly + i) % max_dly);
554 return 0;
555 }
556 }
557
558 meson_mmc_reset_resampling(host);
559 return -EIO;
560}
561
562static int meson_mmc_prepare_ios_clock(struct meson_host *host,
563 struct mmc_ios *ios)
564{
565 bool ddr;
566
567 switch (ios->timing) {
568 case MMC_TIMING_MMC_DDR52:
569 case MMC_TIMING_UHS_DDR50:
570 ddr = true;
571 break;
572
573 default:
574 ddr = false;
575 break;
576 }
577
578 return meson_mmc_clk_set(host, ios->clock, ddr);
579}
580
581static void meson_mmc_check_resampling(struct meson_host *host,
582 struct mmc_ios *ios)
583{
584 switch (ios->timing) {
585 case MMC_TIMING_LEGACY:
586 case MMC_TIMING_MMC_HS:
587 case MMC_TIMING_SD_HS:
588 case MMC_TIMING_MMC_DDR52:
589 meson_mmc_disable_resampling(host);
590 break;
591 }
592}
593
594static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
595{
596 struct meson_host *host = mmc_priv(mmc);
597 u32 bus_width, val;
598 int err;
599
600 /*
601 * GPIO regulator, only controls switching between 1v8 and
602 * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
603 */
604 switch (ios->power_mode) {
605 case MMC_POWER_OFF:
606 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
607 mmc_regulator_disable_vqmmc(mmc);
608
609 break;
610
611 case MMC_POWER_UP:
612 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
613
614 break;
615
616 case MMC_POWER_ON:
617 mmc_regulator_enable_vqmmc(mmc);
618
619 break;
620 }
621
622 /* Bus width */
623 switch (ios->bus_width) {
624 case MMC_BUS_WIDTH_1:
625 bus_width = CFG_BUS_WIDTH_1;
626 break;
627 case MMC_BUS_WIDTH_4:
628 bus_width = CFG_BUS_WIDTH_4;
629 break;
630 case MMC_BUS_WIDTH_8:
631 bus_width = CFG_BUS_WIDTH_8;
632 break;
633 default:
634 dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
635 ios->bus_width);
636 bus_width = CFG_BUS_WIDTH_4;
637 }
638
639 val = readl(host->regs + SD_EMMC_CFG);
640 val &= ~CFG_BUS_WIDTH_MASK;
641 val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
642 writel(val, host->regs + SD_EMMC_CFG);
643
644 meson_mmc_check_resampling(host, ios);
645 err = meson_mmc_prepare_ios_clock(host, ios);
646 if (err)
647 dev_err(host->dev, "Failed to set clock: %d\n,", err);
648
649 dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val);
650}
651
652static void meson_mmc_request_done(struct mmc_host *mmc,
653 struct mmc_request *mrq)
654{
655 struct meson_host *host = mmc_priv(mmc);
656
657 host->cmd = NULL;
658 if (host->needs_pre_post_req)
659 meson_mmc_post_req(mmc, mrq, 0);
660 mmc_request_done(host->mmc, mrq);
661}
662
663static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
664{
665 struct meson_host *host = mmc_priv(mmc);
666 u32 cfg, blksz_old;
667
668 cfg = readl(host->regs + SD_EMMC_CFG);
669 blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
670
671 if (!is_power_of_2(blksz))
672 dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
673
674 blksz = ilog2(blksz);
675
676 /* check if block-size matches, if not update */
677 if (blksz == blksz_old)
678 return;
679
680 dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
681 blksz_old, blksz);
682
683 cfg &= ~CFG_BLK_LEN_MASK;
684 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
685 writel(cfg, host->regs + SD_EMMC_CFG);
686}
687
688static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
689{
690 if (cmd->flags & MMC_RSP_PRESENT) {
691 if (cmd->flags & MMC_RSP_136)
692 *cmd_cfg |= CMD_CFG_RESP_128;
693 *cmd_cfg |= CMD_CFG_RESP_NUM;
694
695 if (!(cmd->flags & MMC_RSP_CRC))
696 *cmd_cfg |= CMD_CFG_RESP_NOCRC;
697
698 if (cmd->flags & MMC_RSP_BUSY)
699 *cmd_cfg |= CMD_CFG_R1B;
700 } else {
701 *cmd_cfg |= CMD_CFG_NO_RESP;
702 }
703}
704
705static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
706{
707 struct meson_host *host = mmc_priv(mmc);
708 struct sd_emmc_desc *desc = host->descs;
709 struct mmc_data *data = host->cmd->data;
710 struct scatterlist *sg;
711 u32 start;
712 int i;
713
714 if (data->flags & MMC_DATA_WRITE)
715 cmd_cfg |= CMD_CFG_DATA_WR;
716
717 if (data->blocks > 1) {
718 cmd_cfg |= CMD_CFG_BLOCK_MODE;
719 meson_mmc_set_blksz(mmc, data->blksz);
720 }
721
722 for_each_sg(data->sg, sg, data->sg_count, i) {
723 unsigned int len = sg_dma_len(sg);
724
725 if (data->blocks > 1)
726 len /= data->blksz;
727
728 desc[i].cmd_cfg = cmd_cfg;
729 desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
730 if (i > 0)
731 desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
732 desc[i].cmd_arg = host->cmd->arg;
733 desc[i].cmd_resp = 0;
734 desc[i].cmd_data = sg_dma_address(sg);
735 }
736 desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
737
738 dma_wmb(); /* ensure descriptor is written before kicked */
739 start = host->descs_dma_addr | START_DESC_BUSY;
740 writel(start, host->regs + SD_EMMC_START);
741}
742
743/* local sg copy for dram_access_quirk */
744static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
745 size_t buflen, bool to_buffer)
746{
747 unsigned int sg_flags = SG_MITER_ATOMIC;
748 struct scatterlist *sgl = data->sg;
749 unsigned int nents = data->sg_len;
750 struct sg_mapping_iter miter;
751 unsigned int offset = 0;
752
753 if (to_buffer)
754 sg_flags |= SG_MITER_FROM_SG;
755 else
756 sg_flags |= SG_MITER_TO_SG;
757
758 sg_miter_start(&miter, sgl, nents, sg_flags);
759
760 while ((offset < buflen) && sg_miter_next(&miter)) {
761 unsigned int buf_offset = 0;
762 unsigned int len, left;
763 u32 *buf = miter.addr;
764
765 len = min(miter.length, buflen - offset);
766 left = len;
767
768 if (to_buffer) {
769 do {
770 writel(*buf++, host->bounce_iomem_buf + offset + buf_offset);
771
772 buf_offset += 4;
773 left -= 4;
774 } while (left);
775 } else {
776 do {
777 *buf++ = readl(host->bounce_iomem_buf + offset + buf_offset);
778
779 buf_offset += 4;
780 left -= 4;
781 } while (left);
782 }
783
784 offset += len;
785 }
786
787 sg_miter_stop(&miter);
788}
789
790static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
791{
792 struct meson_host *host = mmc_priv(mmc);
793 struct mmc_data *data = cmd->data;
794 u32 cmd_cfg = 0, cmd_data = 0;
795 unsigned int xfer_bytes = 0;
796
797 /* Setup descriptors */
798 dma_rmb();
799
800 host->cmd = cmd;
801
802 cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
803 cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
804
805 meson_mmc_set_response_bits(cmd, &cmd_cfg);
806
807 /* data? */
808 if (data) {
809 data->bytes_xfered = 0;
810 cmd_cfg |= CMD_CFG_DATA_IO;
811 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
812 ilog2(meson_mmc_get_timeout_msecs(data)));
813
814 if (meson_mmc_desc_chain_mode(data)) {
815 meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
816 return;
817 }
818
819 if (data->blocks > 1) {
820 cmd_cfg |= CMD_CFG_BLOCK_MODE;
821 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
822 data->blocks);
823 meson_mmc_set_blksz(mmc, data->blksz);
824 } else {
825 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
826 }
827
828 xfer_bytes = data->blksz * data->blocks;
829 if (data->flags & MMC_DATA_WRITE) {
830 cmd_cfg |= CMD_CFG_DATA_WR;
831 WARN_ON(xfer_bytes > host->bounce_buf_size);
832 if (host->dram_access_quirk)
833 meson_mmc_copy_buffer(host, data, xfer_bytes, true);
834 else
835 sg_copy_to_buffer(data->sg, data->sg_len,
836 host->bounce_buf, xfer_bytes);
837 dma_wmb();
838 }
839
840 cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
841 } else {
842 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
843 ilog2(SD_EMMC_CMD_TIMEOUT));
844 }
845
846 /* Last descriptor */
847 cmd_cfg |= CMD_CFG_END_OF_CHAIN;
848 writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
849 writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
850 writel(0, host->regs + SD_EMMC_CMD_RSP);
851 wmb(); /* ensure descriptor is written before kicked */
852 writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
853}
854
855static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data)
856{
857 struct scatterlist *sg;
858 int i;
859
860 /* Reject request if any element offset or size is not 32bit aligned */
861 for_each_sg(data->sg, sg, data->sg_len, i) {
862 if (!IS_ALIGNED(sg->offset, sizeof(u32)) ||
863 !IS_ALIGNED(sg->length, sizeof(u32))) {
864 dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n",
865 data->sg->offset, data->sg->length);
866 return -EINVAL;
867 }
868 }
869
870 return 0;
871}
872
873static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
874{
875 struct meson_host *host = mmc_priv(mmc);
876 host->needs_pre_post_req = mrq->data &&
877 !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
878
879 /*
880 * The memory at the end of the controller used as bounce buffer for
881 * the dram_access_quirk only accepts 32bit read/write access,
882 * check the aligment and length of the data before starting the request.
883 */
884 if (host->dram_access_quirk && mrq->data) {
885 mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
886 if (mrq->cmd->error) {
887 mmc_request_done(mmc, mrq);
888 return;
889 }
890 }
891
892 if (host->needs_pre_post_req) {
893 meson_mmc_get_transfer_mode(mmc, mrq);
894 if (!meson_mmc_desc_chain_mode(mrq->data))
895 host->needs_pre_post_req = false;
896 }
897
898 if (host->needs_pre_post_req)
899 meson_mmc_pre_req(mmc, mrq);
900
901 /* Stop execution */
902 writel(0, host->regs + SD_EMMC_START);
903
904 meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
905}
906
907static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
908{
909 struct meson_host *host = mmc_priv(mmc);
910
911 if (cmd->flags & MMC_RSP_136) {
912 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
913 cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
914 cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
915 cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
916 } else if (cmd->flags & MMC_RSP_PRESENT) {
917 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
918 }
919}
920
921static void __meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
922{
923 struct meson_host *host = mmc_priv(mmc);
924 u32 reg_irqen = IRQ_EN_MASK;
925
926 if (enable)
927 reg_irqen |= IRQ_SDIO;
928 writel(reg_irqen, host->regs + SD_EMMC_IRQ_EN);
929}
930
931static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
932{
933 struct meson_host *host = dev_id;
934 struct mmc_command *cmd;
935 u32 status, raw_status, irq_mask = IRQ_EN_MASK;
936 irqreturn_t ret = IRQ_NONE;
937
938 if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
939 irq_mask |= IRQ_SDIO;
940 raw_status = readl(host->regs + SD_EMMC_STATUS);
941 status = raw_status & irq_mask;
942
943 if (!status) {
944 dev_dbg(host->dev,
945 "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
946 irq_mask, raw_status);
947 return IRQ_NONE;
948 }
949
950 /* ack all raised interrupts */
951 writel(status, host->regs + SD_EMMC_STATUS);
952
953 cmd = host->cmd;
954
955 if (status & IRQ_SDIO) {
956 spin_lock(&host->lock);
957 __meson_mmc_enable_sdio_irq(host->mmc, 0);
958 sdio_signal_irq(host->mmc);
959 spin_unlock(&host->lock);
960 status &= ~IRQ_SDIO;
961 if (!status)
962 return IRQ_HANDLED;
963 }
964
965 if (WARN_ON(!cmd))
966 return IRQ_NONE;
967
968 cmd->error = 0;
969 if (status & IRQ_CRC_ERR) {
970 dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
971 cmd->error = -EILSEQ;
972 ret = IRQ_WAKE_THREAD;
973 goto out;
974 }
975
976 if (status & IRQ_TIMEOUTS) {
977 dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
978 cmd->error = -ETIMEDOUT;
979 ret = IRQ_WAKE_THREAD;
980 goto out;
981 }
982
983 meson_mmc_read_resp(host->mmc, cmd);
984
985 if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
986 struct mmc_data *data = cmd->data;
987
988 if (data && !cmd->error)
989 data->bytes_xfered = data->blksz * data->blocks;
990
991 return IRQ_WAKE_THREAD;
992 }
993
994out:
995 if (cmd->error) {
996 /* Stop desc in case of errors */
997 u32 start = readl(host->regs + SD_EMMC_START);
998
999 start &= ~START_DESC_BUSY;
1000 writel(start, host->regs + SD_EMMC_START);
1001 }
1002
1003 return ret;
1004}
1005
1006static int meson_mmc_wait_desc_stop(struct meson_host *host)
1007{
1008 u32 status;
1009
1010 /*
1011 * It may sometimes take a while for it to actually halt. Here, we
1012 * are giving it 5ms to comply
1013 *
1014 * If we don't confirm the descriptor is stopped, it might raise new
1015 * IRQs after we have called mmc_request_done() which is bad.
1016 */
1017
1018 return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status,
1019 !(status & (STATUS_BUSY | STATUS_DESC_BUSY)),
1020 100, 5000);
1021}
1022
1023static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
1024{
1025 struct meson_host *host = dev_id;
1026 struct mmc_command *next_cmd, *cmd = host->cmd;
1027 struct mmc_data *data;
1028 unsigned int xfer_bytes;
1029
1030 if (WARN_ON(!cmd))
1031 return IRQ_NONE;
1032
1033 if (cmd->error) {
1034 meson_mmc_wait_desc_stop(host);
1035 meson_mmc_request_done(host->mmc, cmd->mrq);
1036
1037 return IRQ_HANDLED;
1038 }
1039
1040 data = cmd->data;
1041 if (meson_mmc_bounce_buf_read(data)) {
1042 xfer_bytes = data->blksz * data->blocks;
1043 WARN_ON(xfer_bytes > host->bounce_buf_size);
1044 if (host->dram_access_quirk)
1045 meson_mmc_copy_buffer(host, data, xfer_bytes, false);
1046 else
1047 sg_copy_from_buffer(data->sg, data->sg_len,
1048 host->bounce_buf, xfer_bytes);
1049 }
1050
1051 next_cmd = meson_mmc_get_next_command(cmd);
1052 if (next_cmd)
1053 meson_mmc_start_cmd(host->mmc, next_cmd);
1054 else
1055 meson_mmc_request_done(host->mmc, cmd->mrq);
1056
1057 return IRQ_HANDLED;
1058}
1059
1060static void meson_mmc_cfg_init(struct meson_host *host)
1061{
1062 u32 cfg = 0;
1063
1064 cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
1065 ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
1066 cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
1067 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
1068
1069 /* abort chain on R/W errors */
1070 cfg |= CFG_ERR_ABORT;
1071
1072 writel(cfg, host->regs + SD_EMMC_CFG);
1073}
1074
1075static int meson_mmc_card_busy(struct mmc_host *mmc)
1076{
1077 struct meson_host *host = mmc_priv(mmc);
1078 u32 regval;
1079
1080 regval = readl(host->regs + SD_EMMC_STATUS);
1081
1082 /* We are only interrested in lines 0 to 3, so mask the other ones */
1083 return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
1084}
1085
1086static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
1087{
1088 int ret;
1089
1090 /* vqmmc regulator is available */
1091 if (!IS_ERR(mmc->supply.vqmmc)) {
1092 /*
1093 * The usual amlogic setup uses a GPIO to switch from one
1094 * regulator to the other. While the voltage ramp up is
1095 * pretty fast, care must be taken when switching from 3.3v
1096 * to 1.8v. Please make sure the regulator framework is aware
1097 * of your own regulator constraints
1098 */
1099 ret = mmc_regulator_set_vqmmc(mmc, ios);
1100 return ret < 0 ? ret : 0;
1101 }
1102
1103 /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
1104 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1105 return 0;
1106
1107 return -EINVAL;
1108}
1109
1110static void meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
1111{
1112 struct meson_host *host = mmc_priv(mmc);
1113 unsigned long flags;
1114
1115 spin_lock_irqsave(&host->lock, flags);
1116 __meson_mmc_enable_sdio_irq(mmc, enable);
1117 spin_unlock_irqrestore(&host->lock, flags);
1118}
1119
1120static void meson_mmc_ack_sdio_irq(struct mmc_host *mmc)
1121{
1122 meson_mmc_enable_sdio_irq(mmc, 1);
1123}
1124
1125static const struct mmc_host_ops meson_mmc_ops = {
1126 .request = meson_mmc_request,
1127 .set_ios = meson_mmc_set_ios,
1128 .get_cd = mmc_gpio_get_cd,
1129 .pre_req = meson_mmc_pre_req,
1130 .post_req = meson_mmc_post_req,
1131 .execute_tuning = meson_mmc_resampling_tuning,
1132 .card_busy = meson_mmc_card_busy,
1133 .start_signal_voltage_switch = meson_mmc_voltage_switch,
1134 .enable_sdio_irq = meson_mmc_enable_sdio_irq,
1135 .ack_sdio_irq = meson_mmc_ack_sdio_irq,
1136};
1137
1138static int meson_mmc_probe(struct platform_device *pdev)
1139{
1140 struct resource *res;
1141 struct meson_host *host;
1142 struct mmc_host *mmc;
1143 struct clk *core_clk;
1144 int cd_irq, ret;
1145
1146 mmc = devm_mmc_alloc_host(&pdev->dev, sizeof(struct meson_host));
1147 if (!mmc)
1148 return -ENOMEM;
1149 host = mmc_priv(mmc);
1150 host->mmc = mmc;
1151 host->dev = &pdev->dev;
1152 dev_set_drvdata(&pdev->dev, host);
1153
1154 /* The G12A SDIO Controller needs an SRAM bounce buffer */
1155 host->dram_access_quirk = device_property_read_bool(&pdev->dev,
1156 "amlogic,dram-access-quirk");
1157
1158 /* Get regulators and the supported OCR mask */
1159 ret = mmc_regulator_get_supply(mmc);
1160 if (ret)
1161 return ret;
1162
1163 ret = mmc_of_parse(mmc);
1164 if (ret)
1165 return dev_err_probe(&pdev->dev, ret, "error parsing DT\n");
1166
1167 mmc->caps |= MMC_CAP_CMD23;
1168
1169 if (mmc->caps & MMC_CAP_SDIO_IRQ)
1170 mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
1171
1172 host->data = of_device_get_match_data(&pdev->dev);
1173 if (!host->data)
1174 return -EINVAL;
1175
1176 ret = device_reset_optional(&pdev->dev);
1177 if (ret)
1178 return dev_err_probe(&pdev->dev, ret, "device reset failed\n");
1179
1180 host->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
1181 if (IS_ERR(host->regs))
1182 return PTR_ERR(host->regs);
1183
1184 host->irq = platform_get_irq(pdev, 0);
1185 if (host->irq < 0)
1186 return host->irq;
1187
1188 cd_irq = platform_get_irq_optional(pdev, 1);
1189 mmc_gpio_set_cd_irq(mmc, cd_irq);
1190
1191 host->pinctrl = devm_pinctrl_get(&pdev->dev);
1192 if (IS_ERR(host->pinctrl))
1193 return PTR_ERR(host->pinctrl);
1194
1195 host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
1196 "clk-gate");
1197 if (IS_ERR(host->pins_clk_gate)) {
1198 dev_warn(&pdev->dev,
1199 "can't get clk-gate pinctrl, using clk_stop bit\n");
1200 host->pins_clk_gate = NULL;
1201 }
1202
1203 core_clk = devm_clk_get_enabled(&pdev->dev, "core");
1204 if (IS_ERR(core_clk))
1205 return PTR_ERR(core_clk);
1206
1207 ret = meson_mmc_clk_init(host);
1208 if (ret)
1209 return ret;
1210
1211 /* set config to sane default */
1212 meson_mmc_cfg_init(host);
1213
1214 /* Stop execution */
1215 writel(0, host->regs + SD_EMMC_START);
1216
1217 /* clear, ack and enable interrupts */
1218 writel(0, host->regs + SD_EMMC_IRQ_EN);
1219 writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
1220 writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
1221
1222 ret = request_threaded_irq(host->irq, meson_mmc_irq,
1223 meson_mmc_irq_thread, IRQF_ONESHOT,
1224 dev_name(&pdev->dev), host);
1225 if (ret)
1226 goto err_init_clk;
1227
1228 spin_lock_init(&host->lock);
1229
1230 if (host->dram_access_quirk) {
1231 /* Limit segments to 1 due to low available sram memory */
1232 mmc->max_segs = 1;
1233 /* Limit to the available sram memory */
1234 mmc->max_blk_count = SD_EMMC_SRAM_DATA_BUF_LEN /
1235 mmc->max_blk_size;
1236 } else {
1237 mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
1238 mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
1239 sizeof(struct sd_emmc_desc);
1240 }
1241 mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
1242 mmc->max_seg_size = mmc->max_req_size;
1243
1244 /*
1245 * At the moment, we don't know how to reliably enable HS400.
1246 * From the different datasheets, it is not even clear if this mode
1247 * is officially supported by any of the SoCs
1248 */
1249 mmc->caps2 &= ~MMC_CAP2_HS400;
1250
1251 if (host->dram_access_quirk) {
1252 /*
1253 * The MMC Controller embeds 1,5KiB of internal SRAM
1254 * that can be used to be used as bounce buffer.
1255 * In the case of the G12A SDIO controller, use these
1256 * instead of the DDR memory
1257 */
1258 host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
1259 host->bounce_iomem_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
1260 host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
1261 } else {
1262 /* data bounce buffer */
1263 host->bounce_buf_size = mmc->max_req_size;
1264 host->bounce_buf =
1265 dmam_alloc_coherent(host->dev, host->bounce_buf_size,
1266 &host->bounce_dma_addr, GFP_KERNEL);
1267 if (host->bounce_buf == NULL) {
1268 dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
1269 ret = -ENOMEM;
1270 goto err_free_irq;
1271 }
1272 }
1273
1274 host->descs = dmam_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1275 &host->descs_dma_addr, GFP_KERNEL);
1276 if (!host->descs) {
1277 dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
1278 ret = -ENOMEM;
1279 goto err_free_irq;
1280 }
1281
1282 mmc->ops = &meson_mmc_ops;
1283 ret = mmc_add_host(mmc);
1284 if (ret)
1285 goto err_free_irq;
1286
1287 return 0;
1288
1289err_free_irq:
1290 free_irq(host->irq, host);
1291err_init_clk:
1292 clk_disable_unprepare(host->mmc_clk);
1293 return ret;
1294}
1295
1296static void meson_mmc_remove(struct platform_device *pdev)
1297{
1298 struct meson_host *host = dev_get_drvdata(&pdev->dev);
1299
1300 mmc_remove_host(host->mmc);
1301
1302 /* disable interrupts */
1303 writel(0, host->regs + SD_EMMC_IRQ_EN);
1304 free_irq(host->irq, host);
1305
1306 clk_disable_unprepare(host->mmc_clk);
1307}
1308
1309static const struct meson_mmc_data meson_gx_data = {
1310 .tx_delay_mask = CLK_V2_TX_DELAY_MASK,
1311 .rx_delay_mask = CLK_V2_RX_DELAY_MASK,
1312 .always_on = CLK_V2_ALWAYS_ON,
1313 .adjust = SD_EMMC_ADJUST,
1314 .irq_sdio_sleep = CLK_V2_IRQ_SDIO_SLEEP,
1315};
1316
1317static const struct meson_mmc_data meson_axg_data = {
1318 .tx_delay_mask = CLK_V3_TX_DELAY_MASK,
1319 .rx_delay_mask = CLK_V3_RX_DELAY_MASK,
1320 .always_on = CLK_V3_ALWAYS_ON,
1321 .adjust = SD_EMMC_V3_ADJUST,
1322 .irq_sdio_sleep = CLK_V3_IRQ_SDIO_SLEEP,
1323};
1324
1325static const struct of_device_id meson_mmc_of_match[] = {
1326 { .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data },
1327 { .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data },
1328 { .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data },
1329 { .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data },
1330 { .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data },
1331 {}
1332};
1333MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
1334
1335static struct platform_driver meson_mmc_driver = {
1336 .probe = meson_mmc_probe,
1337 .remove_new = meson_mmc_remove,
1338 .driver = {
1339 .name = DRIVER_NAME,
1340 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
1341 .of_match_table = meson_mmc_of_match,
1342 },
1343};
1344
1345module_platform_driver(meson_mmc_driver);
1346
1347MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver");
1348MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
1349MODULE_LICENSE("GPL v2");