Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
4 */
5
6#include <linux/bitops.h>
7#include <linux/i2c.h>
8#include <linux/interrupt.h>
9#include <linux/irq.h>
10#include <linux/irqdomain.h>
11#include <linux/module.h>
12#include <linux/of_device.h>
13#include <linux/of_platform.h>
14#include <linux/pinctrl/consumer.h>
15#include <linux/regmap.h>
16#include <linux/slab.h>
17
18#include <dt-bindings/mfd/qcom-pm8008.h>
19
20#define I2C_INTR_STATUS_BASE 0x0550
21#define INT_RT_STS_OFFSET 0x10
22#define INT_SET_TYPE_OFFSET 0x11
23#define INT_POL_HIGH_OFFSET 0x12
24#define INT_POL_LOW_OFFSET 0x13
25#define INT_LATCHED_CLR_OFFSET 0x14
26#define INT_EN_SET_OFFSET 0x15
27#define INT_EN_CLR_OFFSET 0x16
28#define INT_LATCHED_STS_OFFSET 0x18
29
30enum {
31 PM8008_MISC,
32 PM8008_TEMP_ALARM,
33 PM8008_GPIO1,
34 PM8008_GPIO2,
35 PM8008_NUM_PERIPHS,
36};
37
38#define PM8008_PERIPH_0_BASE 0x900
39#define PM8008_PERIPH_1_BASE 0x2400
40#define PM8008_PERIPH_2_BASE 0xC000
41#define PM8008_PERIPH_3_BASE 0xC100
42
43#define PM8008_TEMP_ALARM_ADDR PM8008_PERIPH_1_BASE
44#define PM8008_GPIO1_ADDR PM8008_PERIPH_2_BASE
45#define PM8008_GPIO2_ADDR PM8008_PERIPH_3_BASE
46
47#define PM8008_STATUS_BASE (PM8008_PERIPH_0_BASE | INT_LATCHED_STS_OFFSET)
48#define PM8008_MASK_BASE (PM8008_PERIPH_0_BASE | INT_EN_SET_OFFSET)
49#define PM8008_UNMASK_BASE (PM8008_PERIPH_0_BASE | INT_EN_CLR_OFFSET)
50#define PM8008_TYPE_BASE (PM8008_PERIPH_0_BASE | INT_SET_TYPE_OFFSET)
51#define PM8008_ACK_BASE (PM8008_PERIPH_0_BASE | INT_LATCHED_CLR_OFFSET)
52#define PM8008_POLARITY_HI_BASE (PM8008_PERIPH_0_BASE | INT_POL_HIGH_OFFSET)
53#define PM8008_POLARITY_LO_BASE (PM8008_PERIPH_0_BASE | INT_POL_LOW_OFFSET)
54
55#define PM8008_PERIPH_OFFSET(paddr) (paddr - PM8008_PERIPH_0_BASE)
56
57static unsigned int p0_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_0_BASE)};
58static unsigned int p1_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_1_BASE)};
59static unsigned int p2_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_2_BASE)};
60static unsigned int p3_offs[] = {PM8008_PERIPH_OFFSET(PM8008_PERIPH_3_BASE)};
61
62static struct regmap_irq_sub_irq_map pm8008_sub_reg_offsets[] = {
63 REGMAP_IRQ_MAIN_REG_OFFSET(p0_offs),
64 REGMAP_IRQ_MAIN_REG_OFFSET(p1_offs),
65 REGMAP_IRQ_MAIN_REG_OFFSET(p2_offs),
66 REGMAP_IRQ_MAIN_REG_OFFSET(p3_offs),
67};
68
69static unsigned int pm8008_virt_regs[] = {
70 PM8008_POLARITY_HI_BASE,
71 PM8008_POLARITY_LO_BASE,
72};
73
74enum {
75 POLARITY_HI_INDEX,
76 POLARITY_LO_INDEX,
77 PM8008_NUM_VIRT_REGS,
78};
79
80static struct regmap_irq pm8008_irqs[] = {
81 REGMAP_IRQ_REG(PM8008_IRQ_MISC_UVLO, PM8008_MISC, BIT(0)),
82 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OVLO, PM8008_MISC, BIT(1)),
83 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST2, PM8008_MISC, BIT(2)),
84 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST3, PM8008_MISC, BIT(3)),
85 REGMAP_IRQ_REG(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC, BIT(4)),
86 REGMAP_IRQ_REG(PM8008_IRQ_TEMP_ALARM, PM8008_TEMP_ALARM, BIT(0)),
87 REGMAP_IRQ_REG(PM8008_IRQ_GPIO1, PM8008_GPIO1, BIT(0)),
88 REGMAP_IRQ_REG(PM8008_IRQ_GPIO2, PM8008_GPIO2, BIT(0)),
89};
90
91static int pm8008_set_type_virt(unsigned int **virt_buf,
92 unsigned int type, unsigned long hwirq,
93 int reg)
94{
95 switch (type) {
96 case IRQ_TYPE_EDGE_FALLING:
97 case IRQ_TYPE_LEVEL_LOW:
98 virt_buf[POLARITY_HI_INDEX][reg] &= ~pm8008_irqs[hwirq].mask;
99 virt_buf[POLARITY_LO_INDEX][reg] |= pm8008_irqs[hwirq].mask;
100 break;
101
102 case IRQ_TYPE_EDGE_RISING:
103 case IRQ_TYPE_LEVEL_HIGH:
104 virt_buf[POLARITY_HI_INDEX][reg] |= pm8008_irqs[hwirq].mask;
105 virt_buf[POLARITY_LO_INDEX][reg] &= ~pm8008_irqs[hwirq].mask;
106 break;
107
108 case IRQ_TYPE_EDGE_BOTH:
109 virt_buf[POLARITY_HI_INDEX][reg] |= pm8008_irqs[hwirq].mask;
110 virt_buf[POLARITY_LO_INDEX][reg] |= pm8008_irqs[hwirq].mask;
111 break;
112
113 default:
114 return -EINVAL;
115 }
116
117 return 0;
118}
119
120static struct regmap_irq_chip pm8008_irq_chip = {
121 .name = "pm8008_irq",
122 .main_status = I2C_INTR_STATUS_BASE,
123 .num_main_regs = 1,
124 .num_virt_regs = PM8008_NUM_VIRT_REGS,
125 .irqs = pm8008_irqs,
126 .num_irqs = ARRAY_SIZE(pm8008_irqs),
127 .num_regs = PM8008_NUM_PERIPHS,
128 .not_fixed_stride = true,
129 .sub_reg_offsets = pm8008_sub_reg_offsets,
130 .set_type_virt = pm8008_set_type_virt,
131 .status_base = PM8008_STATUS_BASE,
132 .mask_base = PM8008_MASK_BASE,
133 .unmask_base = PM8008_UNMASK_BASE,
134 .type_base = PM8008_TYPE_BASE,
135 .ack_base = PM8008_ACK_BASE,
136 .virt_reg_base = pm8008_virt_regs,
137 .num_type_reg = PM8008_NUM_PERIPHS,
138};
139
140static struct regmap_config qcom_mfd_regmap_cfg = {
141 .reg_bits = 16,
142 .val_bits = 8,
143 .max_register = 0xFFFF,
144};
145
146static int pm8008_init(struct regmap *regmap)
147{
148 int rc;
149
150 /*
151 * Set TEMP_ALARM peripheral's TYPE so that the regmap-irq framework
152 * reads this as the default value instead of zero, the HW default.
153 * This is required to enable the writing of TYPE registers in
154 * regmap_irq_sync_unlock().
155 */
156 rc = regmap_write(regmap, (PM8008_TEMP_ALARM_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
157 if (rc)
158 return rc;
159
160 /* Do the same for GPIO1 and GPIO2 peripherals */
161 rc = regmap_write(regmap, (PM8008_GPIO1_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
162 if (rc)
163 return rc;
164
165 rc = regmap_write(regmap, (PM8008_GPIO2_ADDR | INT_SET_TYPE_OFFSET), BIT(0));
166
167 return rc;
168}
169
170static int pm8008_probe_irq_peripherals(struct device *dev,
171 struct regmap *regmap,
172 int client_irq)
173{
174 int rc, i;
175 struct regmap_irq_type *type;
176 struct regmap_irq_chip_data *irq_data;
177
178 rc = pm8008_init(regmap);
179 if (rc) {
180 dev_err(dev, "Init failed: %d\n", rc);
181 return rc;
182 }
183
184 for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) {
185 type = &pm8008_irqs[i].type;
186
187 type->type_reg_offset = pm8008_irqs[i].reg_offset;
188 type->type_rising_val = pm8008_irqs[i].mask;
189 type->type_falling_val = pm8008_irqs[i].mask;
190 type->type_level_high_val = 0;
191 type->type_level_low_val = 0;
192
193 if (type->type_reg_offset == PM8008_MISC)
194 type->types_supported = IRQ_TYPE_EDGE_RISING;
195 else
196 type->types_supported = (IRQ_TYPE_EDGE_BOTH |
197 IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
198 }
199
200 rc = devm_regmap_add_irq_chip(dev, regmap, client_irq,
201 IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
202 if (rc) {
203 dev_err(dev, "Failed to add IRQ chip: %d\n", rc);
204 return rc;
205 }
206
207 return 0;
208}
209
210static int pm8008_probe(struct i2c_client *client)
211{
212 int rc;
213 struct device *dev;
214 struct regmap *regmap;
215
216 dev = &client->dev;
217 regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
218 if (IS_ERR(regmap))
219 return PTR_ERR(regmap);
220
221 i2c_set_clientdata(client, regmap);
222
223 if (of_property_read_bool(dev->of_node, "interrupt-controller")) {
224 rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq);
225 if (rc)
226 dev_err(dev, "Failed to probe irq periphs: %d\n", rc);
227 }
228
229 return devm_of_platform_populate(dev);
230}
231
232static const struct of_device_id pm8008_match[] = {
233 { .compatible = "qcom,pm8008", },
234 { },
235};
236
237static struct i2c_driver pm8008_mfd_driver = {
238 .driver = {
239 .name = "pm8008",
240 .of_match_table = pm8008_match,
241 },
242 .probe_new = pm8008_probe,
243};
244module_i2c_driver(pm8008_mfd_driver);
245
246MODULE_LICENSE("GPL v2");
247MODULE_ALIAS("i2c:qcom-pm8008");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
4 */
5
6#include <linux/bitops.h>
7#include <linux/i2c.h>
8#include <linux/interrupt.h>
9#include <linux/irq.h>
10#include <linux/irqdomain.h>
11#include <linux/module.h>
12#include <linux/of.h>
13#include <linux/of_platform.h>
14#include <linux/pinctrl/consumer.h>
15#include <linux/regmap.h>
16#include <linux/slab.h>
17
18#include <dt-bindings/mfd/qcom-pm8008.h>
19
20#define I2C_INTR_STATUS_BASE 0x0550
21#define INT_RT_STS_OFFSET 0x10
22#define INT_SET_TYPE_OFFSET 0x11
23#define INT_POL_HIGH_OFFSET 0x12
24#define INT_POL_LOW_OFFSET 0x13
25#define INT_LATCHED_CLR_OFFSET 0x14
26#define INT_EN_SET_OFFSET 0x15
27#define INT_EN_CLR_OFFSET 0x16
28#define INT_LATCHED_STS_OFFSET 0x18
29
30enum {
31 PM8008_MISC,
32 PM8008_TEMP_ALARM,
33 PM8008_GPIO1,
34 PM8008_GPIO2,
35 PM8008_NUM_PERIPHS,
36};
37
38#define PM8008_PERIPH_0_BASE 0x900
39#define PM8008_PERIPH_1_BASE 0x2400
40#define PM8008_PERIPH_2_BASE 0xC000
41#define PM8008_PERIPH_3_BASE 0xC100
42
43#define PM8008_TEMP_ALARM_ADDR PM8008_PERIPH_1_BASE
44#define PM8008_GPIO1_ADDR PM8008_PERIPH_2_BASE
45#define PM8008_GPIO2_ADDR PM8008_PERIPH_3_BASE
46
47enum {
48 SET_TYPE_INDEX,
49 POLARITY_HI_INDEX,
50 POLARITY_LO_INDEX,
51};
52
53static unsigned int pm8008_config_regs[] = {
54 INT_SET_TYPE_OFFSET,
55 INT_POL_HIGH_OFFSET,
56 INT_POL_LOW_OFFSET,
57};
58
59static struct regmap_irq pm8008_irqs[] = {
60 REGMAP_IRQ_REG(PM8008_IRQ_MISC_UVLO, PM8008_MISC, BIT(0)),
61 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OVLO, PM8008_MISC, BIT(1)),
62 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST2, PM8008_MISC, BIT(2)),
63 REGMAP_IRQ_REG(PM8008_IRQ_MISC_OTST3, PM8008_MISC, BIT(3)),
64 REGMAP_IRQ_REG(PM8008_IRQ_MISC_LDO_OCP, PM8008_MISC, BIT(4)),
65 REGMAP_IRQ_REG(PM8008_IRQ_TEMP_ALARM, PM8008_TEMP_ALARM, BIT(0)),
66 REGMAP_IRQ_REG(PM8008_IRQ_GPIO1, PM8008_GPIO1, BIT(0)),
67 REGMAP_IRQ_REG(PM8008_IRQ_GPIO2, PM8008_GPIO2, BIT(0)),
68};
69
70static const unsigned int pm8008_periph_base[] = {
71 PM8008_PERIPH_0_BASE,
72 PM8008_PERIPH_1_BASE,
73 PM8008_PERIPH_2_BASE,
74 PM8008_PERIPH_3_BASE,
75};
76
77static unsigned int pm8008_get_irq_reg(struct regmap_irq_chip_data *data,
78 unsigned int base, int index)
79{
80 /* Simple linear addressing for the main status register */
81 if (base == I2C_INTR_STATUS_BASE)
82 return base + index;
83
84 return pm8008_periph_base[index] + base;
85}
86
87static int pm8008_set_type_config(unsigned int **buf, unsigned int type,
88 const struct regmap_irq *irq_data, int idx,
89 void *irq_drv_data)
90{
91 switch (type) {
92 case IRQ_TYPE_EDGE_FALLING:
93 case IRQ_TYPE_LEVEL_LOW:
94 buf[POLARITY_HI_INDEX][idx] &= ~irq_data->mask;
95 buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
96 break;
97
98 case IRQ_TYPE_EDGE_RISING:
99 case IRQ_TYPE_LEVEL_HIGH:
100 buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
101 buf[POLARITY_LO_INDEX][idx] &= ~irq_data->mask;
102 break;
103
104 case IRQ_TYPE_EDGE_BOTH:
105 buf[POLARITY_HI_INDEX][idx] |= irq_data->mask;
106 buf[POLARITY_LO_INDEX][idx] |= irq_data->mask;
107 break;
108
109 default:
110 return -EINVAL;
111 }
112
113 if (type & IRQ_TYPE_EDGE_BOTH)
114 buf[SET_TYPE_INDEX][idx] |= irq_data->mask;
115 else
116 buf[SET_TYPE_INDEX][idx] &= ~irq_data->mask;
117
118 return 0;
119}
120
121static struct regmap_irq_chip pm8008_irq_chip = {
122 .name = "pm8008_irq",
123 .main_status = I2C_INTR_STATUS_BASE,
124 .num_main_regs = 1,
125 .irqs = pm8008_irqs,
126 .num_irqs = ARRAY_SIZE(pm8008_irqs),
127 .num_regs = PM8008_NUM_PERIPHS,
128 .status_base = INT_LATCHED_STS_OFFSET,
129 .mask_base = INT_EN_CLR_OFFSET,
130 .unmask_base = INT_EN_SET_OFFSET,
131 .mask_unmask_non_inverted = true,
132 .ack_base = INT_LATCHED_CLR_OFFSET,
133 .config_base = pm8008_config_regs,
134 .num_config_bases = ARRAY_SIZE(pm8008_config_regs),
135 .num_config_regs = PM8008_NUM_PERIPHS,
136 .set_type_config = pm8008_set_type_config,
137 .get_irq_reg = pm8008_get_irq_reg,
138};
139
140static struct regmap_config qcom_mfd_regmap_cfg = {
141 .reg_bits = 16,
142 .val_bits = 8,
143 .max_register = 0xFFFF,
144};
145
146static int pm8008_probe_irq_peripherals(struct device *dev,
147 struct regmap *regmap,
148 int client_irq)
149{
150 int rc, i;
151 struct regmap_irq_type *type;
152 struct regmap_irq_chip_data *irq_data;
153
154 for (i = 0; i < ARRAY_SIZE(pm8008_irqs); i++) {
155 type = &pm8008_irqs[i].type;
156
157 type->type_reg_offset = pm8008_irqs[i].reg_offset;
158
159 if (type->type_reg_offset == PM8008_MISC)
160 type->types_supported = IRQ_TYPE_EDGE_RISING;
161 else
162 type->types_supported = (IRQ_TYPE_EDGE_BOTH |
163 IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW);
164 }
165
166 rc = devm_regmap_add_irq_chip(dev, regmap, client_irq,
167 IRQF_SHARED, 0, &pm8008_irq_chip, &irq_data);
168 if (rc) {
169 dev_err(dev, "Failed to add IRQ chip: %d\n", rc);
170 return rc;
171 }
172
173 return 0;
174}
175
176static int pm8008_probe(struct i2c_client *client)
177{
178 int rc;
179 struct device *dev;
180 struct regmap *regmap;
181
182 dev = &client->dev;
183 regmap = devm_regmap_init_i2c(client, &qcom_mfd_regmap_cfg);
184 if (IS_ERR(regmap))
185 return PTR_ERR(regmap);
186
187 i2c_set_clientdata(client, regmap);
188
189 if (of_property_read_bool(dev->of_node, "interrupt-controller")) {
190 rc = pm8008_probe_irq_peripherals(dev, regmap, client->irq);
191 if (rc)
192 dev_err(dev, "Failed to probe irq periphs: %d\n", rc);
193 }
194
195 return devm_of_platform_populate(dev);
196}
197
198static const struct of_device_id pm8008_match[] = {
199 { .compatible = "qcom,pm8008", },
200 { },
201};
202MODULE_DEVICE_TABLE(of, pm8008_match);
203
204static struct i2c_driver pm8008_mfd_driver = {
205 .driver = {
206 .name = "pm8008",
207 .of_match_table = pm8008_match,
208 },
209 .probe = pm8008_probe,
210};
211module_i2c_driver(pm8008_mfd_driver);
212
213MODULE_LICENSE("GPL v2");