Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Input core configuration
4#
5menuconfig INPUT_KEYBOARD
6 bool "Keyboards"
7 default y
8 help
9 Say Y here, and a list of supported keyboards will be displayed.
10 This option doesn't affect the kernel.
11
12 If unsure, say Y.
13
14if INPUT_KEYBOARD
15
16config KEYBOARD_ADC
17 tristate "ADC Ladder Buttons"
18 depends on IIO
19 help
20 This driver implements support for buttons connected
21 to an ADC using a resistor ladder.
22
23 Say Y here if your device has such buttons connected to an ADC. Your
24 board-specific setup logic must also provide a configuration data
25 for mapping voltages to buttons.
26
27 To compile this driver as a module, choose M here: the
28 module will be called adc_keys.
29
30config KEYBOARD_ADP5520
31 tristate "Keypad Support for ADP5520 PMIC"
32 depends on PMIC_ADP5520
33 help
34 This option enables support for the keypad scan matrix
35 on Analog Devices ADP5520 PMICs.
36
37 To compile this driver as a module, choose M here: the module will
38 be called adp5520-keys.
39
40config KEYBOARD_ADP5588
41 tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
42 depends on I2C
43 select GPIOLIB
44 select GPIOLIB_IRQCHIP
45 select INPUT_MATRIXKMAP
46 help
47 Say Y here if you want to use a ADP5588/87 attached to your
48 system I2C bus.
49
50 To compile this driver as a module, choose M here: the
51 module will be called adp5588-keys.
52
53config KEYBOARD_ADP5589
54 tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
55 depends on I2C
56 help
57 Say Y here if you want to use a ADP5585/ADP5589 attached to your
58 system I2C bus.
59
60 To compile this driver as a module, choose M here: the
61 module will be called adp5589-keys.
62
63config KEYBOARD_AMIGA
64 tristate "Amiga keyboard"
65 depends on AMIGA
66 help
67 Say Y here if you are running Linux on any AMIGA and have a keyboard
68 attached.
69
70 To compile this driver as a module, choose M here: the
71 module will be called amikbd.
72
73config KEYBOARD_APPLESPI
74 tristate "Apple SPI keyboard and trackpad"
75 depends on ACPI && EFI
76 depends on SPI
77 depends on X86 || COMPILE_TEST
78 depends on LEDS_CLASS
79 select CRC16
80 help
81 Say Y here if you are running Linux on any Apple MacBook8,1 or later,
82 or any MacBookPro13,* or MacBookPro14,*.
83
84 You will also need to enable appropriate SPI master controllers:
85 spi_pxa2xx_platform and spi_pxa2xx_pci for MacBook8,1, and
86 spi_pxa2xx_platform and intel_lpss_pci for the rest.
87
88 To compile this driver as a module, choose M here: the
89 module will be called applespi.
90
91config KEYBOARD_ATARI
92 tristate "Atari keyboard"
93 depends on ATARI
94 select ATARI_KBD_CORE
95 help
96 Say Y here if you are running Linux on any Atari and have a keyboard
97 attached.
98
99 To compile this driver as a module, choose M here: the
100 module will be called atakbd.
101
102config KEYBOARD_ATKBD
103 tristate "AT keyboard"
104 default y
105 select SERIO
106 select SERIO_LIBPS2
107 select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO
108 select SERIO_GSCPS2 if GSC
109 select INPUT_VIVALDIFMAP
110 help
111 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
112 you'll need this, unless you have a different type keyboard (USB, ADB
113 or other). This also works for AT and PS/2 keyboards connected over a
114 PS/2 to serial converter.
115
116 If unsure, say Y.
117
118 To compile this driver as a module, choose M here: the
119 module will be called atkbd.
120
121config KEYBOARD_ATKBD_HP_KEYCODES
122 bool "Use HP keyboard scancodes"
123 depends on PARISC && KEYBOARD_ATKBD
124 default y
125 help
126 Say Y here if you have a PA-RISC machine and want to use an AT or
127 PS/2 keyboard, and your keyboard uses keycodes that are specific to
128 PA-RISC keyboards.
129
130 Say N if you use a standard keyboard.
131
132config KEYBOARD_ATKBD_RDI_KEYCODES
133 bool "Use PrecisionBook keyboard scancodes"
134 depends on KEYBOARD_ATKBD_HP_KEYCODES
135 default n
136 help
137 If you have an RDI PrecisionBook, say Y here if you want to use its
138 built-in keyboard (as opposed to an external keyboard).
139
140 The PrecisionBook has five keys that conflict with those used by most
141 AT and PS/2 keyboards. These are as follows:
142
143 PrecisionBook Standard AT or PS/2
144
145 F1 F12
146 Left Ctrl Left Alt
147 Caps Lock Left Ctrl
148 Right Ctrl Caps Lock
149 Left 102nd key (the key to the right of Left Shift)
150
151 If you say N here, and use the PrecisionBook keyboard, then each key
152 in the left-hand column will be interpreted as the corresponding key
153 in the right-hand column.
154
155 If you say Y here, and use an external keyboard, then each key in the
156 right-hand column will be interpreted as the key shown in the
157 left-hand column.
158
159config KEYBOARD_QT1050
160 tristate "Microchip AT42QT1050 Touch Sensor Chip"
161 depends on I2C
162 select REGMAP_I2C
163 help
164 Say Y here if you want to use Microchip AT42QT1050 QTouch
165 Sensor chip as input device.
166
167 To compile this driver as a module, choose M here:
168 the module will be called qt1050
169
170config KEYBOARD_QT1070
171 tristate "Atmel AT42QT1070 Touch Sensor Chip"
172 depends on I2C
173 help
174 Say Y here if you want to use Atmel AT42QT1070 QTouch
175 Sensor chip as input device.
176
177 To compile this driver as a module, choose M here:
178 the module will be called qt1070
179
180config KEYBOARD_QT2160
181 tristate "Atmel AT42QT2160 Touch Sensor Chip"
182 depends on I2C
183 help
184 If you say yes here you get support for Atmel AT42QT2160 Touch
185 Sensor chip as a keyboard input.
186
187 This driver can also be built as a module. If so, the module
188 will be called qt2160.
189
190config KEYBOARD_CLPS711X
191 tristate "CLPS711X Keypad support"
192 depends on ARCH_CLPS711X || COMPILE_TEST
193 select INPUT_MATRIXKMAP
194 help
195 Say Y here to enable the matrix keypad on the Cirrus Logic
196 CLPS711X CPUs.
197
198 To compile this driver as a module, choose M here: the
199 module will be called clps711x-keypad.
200
201config KEYBOARD_DLINK_DIR685
202 tristate "D-Link DIR-685 touchkeys support"
203 depends on I2C
204 default ARCH_GEMINI
205 help
206 If you say yes here you get support for the D-Link DIR-685
207 touchkeys.
208
209 To compile this driver as a module, choose M here: the
210 module will be called dlink-dir685-touchkeys.
211
212config KEYBOARD_LKKBD
213 tristate "DECstation/VAXstation LK201/LK401 keyboard"
214 select SERIO
215 help
216 Say Y here if you want to use a LK201 or LK401 style serial
217 keyboard. This keyboard is also usable on PCs if you attach
218 it with the inputattach program. The connector pinout is
219 described within lkkbd.c.
220
221 To compile this driver as a module, choose M here: the
222 module will be called lkkbd.
223
224config KEYBOARD_EP93XX
225 tristate "EP93xx Matrix Keypad support"
226 depends on ARCH_EP93XX || COMPILE_TEST
227 select INPUT_MATRIXKMAP
228 help
229 Say Y here to enable the matrix keypad on the Cirrus EP93XX.
230
231 To compile this driver as a module, choose M here: the
232 module will be called ep93xx_keypad.
233
234config KEYBOARD_GPIO
235 tristate "GPIO Buttons"
236 depends on GPIOLIB || COMPILE_TEST
237 help
238 This driver implements support for buttons connected
239 to GPIO pins of various CPUs (and some other chips).
240
241 Say Y here if your device has buttons connected
242 directly to such GPIO pins. Your board-specific
243 setup logic must also provide a platform device,
244 with configuration data saying which GPIOs are used.
245
246 To compile this driver as a module, choose M here: the
247 module will be called gpio_keys.
248
249config KEYBOARD_GPIO_POLLED
250 tristate "Polled GPIO buttons"
251 depends on GPIOLIB
252 help
253 This driver implements support for buttons connected
254 to GPIO pins that are not capable of generating interrupts.
255
256 Say Y here if your device has buttons connected
257 directly to such GPIO pins. Your board-specific
258 setup logic must also provide a platform device,
259 with configuration data saying which GPIOs are used.
260
261 To compile this driver as a module, choose M here: the
262 module will be called gpio_keys_polled.
263
264config KEYBOARD_TCA6416
265 tristate "TCA6416/TCA6408A Keypad Support"
266 depends on I2C
267 help
268 This driver implements basic keypad functionality
269 for keys connected through TCA6416/TCA6408A IO expanders.
270
271 Say Y here if your device has keys connected to
272 TCA6416/TCA6408A IO expander. Your board-specific setup logic
273 must also provide pin-mask details(of which TCA6416 pins
274 are used for keypad).
275
276 If enabled the entire TCA6416 device will be managed through
277 this driver.
278
279 To compile this driver as a module, choose M here: the
280 module will be called tca6416_keypad.
281
282config KEYBOARD_TCA8418
283 tristate "TCA8418 Keypad Support"
284 depends on I2C
285 select INPUT_MATRIXKMAP
286 help
287 This driver implements basic keypad functionality
288 for keys connected through TCA8418 keypad decoder.
289
290 Say Y here if your device has keys connected to
291 TCA8418 keypad decoder.
292
293 If enabled the complete TCA8418 device will be managed through
294 this driver.
295
296 To compile this driver as a module, choose M here: the
297 module will be called tca8418_keypad.
298
299config KEYBOARD_MATRIX
300 tristate "GPIO driven matrix keypad support"
301 depends on GPIOLIB || COMPILE_TEST
302 select INPUT_MATRIXKMAP
303 help
304 Enable support for GPIO driven matrix keypad.
305
306 To compile this driver as a module, choose M here: the
307 module will be called matrix_keypad.
308
309config KEYBOARD_HIL_OLD
310 tristate "HP HIL keyboard support (simple driver)"
311 depends on GSC || HP300
312 default y
313 help
314 The "Human Interface Loop" is a older, 8-channel USB-like
315 controller used in several Hewlett Packard models. This driver
316 was adapted from the one written for m68k/hp300, and implements
317 support for a keyboard attached to the HIL port, but not for
318 any other types of HIL input devices like mice or tablets.
319 However, it has been thoroughly tested and is stable.
320
321 If you want full HIL support including support for multiple
322 keyboards, mice, and tablets, you have to enable the
323 "HP System Device Controller i8042 Support" in the input/serio
324 submenu.
325
326config KEYBOARD_HIL
327 tristate "HP HIL keyboard/pointer support"
328 depends on GSC || HP300
329 default y
330 select HP_SDC
331 select HIL_MLC
332 select SERIO
333 help
334 The "Human Interface Loop" is a older, 8-channel USB-like
335 controller used in several Hewlett Packard models.
336 This driver implements support for HIL-keyboards and pointing
337 devices (mice, tablets, touchscreens) attached
338 to your machine, so normally you should say Y here.
339
340config KEYBOARD_HP6XX
341 tristate "HP Jornada 6xx keyboard"
342 depends on SH_HP6XX
343 help
344 Say Y here if you have a HP Jornada 620/660/680/690 and want to
345 support the built-in keyboard.
346
347 To compile this driver as a module, choose M here: the
348 module will be called jornada680_kbd.
349
350config KEYBOARD_HP7XX
351 tristate "HP Jornada 7xx keyboard"
352 depends on SA1100_JORNADA720_SSP && SA1100_SSP
353 help
354 Say Y here if you have a HP Jornada 710/720/728 and want to
355 support the built-in keyboard.
356
357 To compile this driver as a module, choose M here: the
358 module will be called jornada720_kbd.
359
360config KEYBOARD_LM8323
361 tristate "LM8323 keypad chip"
362 depends on I2C
363 depends on LEDS_CLASS
364 help
365 If you say yes here you get support for the National Semiconductor
366 LM8323 keypad controller.
367
368 To compile this driver as a module, choose M here: the
369 module will be called lm8323.
370
371config KEYBOARD_LM8333
372 tristate "LM8333 keypad chip"
373 depends on I2C
374 select INPUT_MATRIXKMAP
375 help
376 If you say yes here you get support for the National Semiconductor
377 LM8333 keypad controller.
378
379 To compile this driver as a module, choose M here: the
380 module will be called lm8333.
381
382config KEYBOARD_LOCOMO
383 tristate "LoCoMo Keyboard Support"
384 depends on SHARP_LOCOMO
385 help
386 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
387
388 To compile this driver as a module, choose M here: the
389 module will be called locomokbd.
390
391config KEYBOARD_LPC32XX
392 tristate "LPC32XX matrix key scanner support"
393 depends on (ARCH_LPC32XX && OF) || COMPILE_TEST
394 select INPUT_MATRIXKMAP
395 help
396 Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
397 connected to a key matrix.
398
399 To compile this driver as a module, choose M here: the
400 module will be called lpc32xx-keys.
401
402config KEYBOARD_MAPLE
403 tristate "Maple bus keyboard"
404 depends on SH_DREAMCAST && MAPLE
405 help
406 Say Y here if you have a Dreamcast console running Linux and have
407 a keyboard attached to its Maple bus.
408
409 To compile this driver as a module, choose M here: the
410 module will be called maple_keyb.
411
412config KEYBOARD_MAX7359
413 tristate "Maxim MAX7359 Key Switch Controller"
414 select INPUT_MATRIXKMAP
415 depends on I2C
416 help
417 If you say yes here you get support for the Maxim MAX7359 Key
418 Switch Controller chip. This providers microprocessors with
419 management of up to 64 key switches
420
421 To compile this driver as a module, choose M here: the
422 module will be called max7359_keypad.
423
424config KEYBOARD_MCS
425 tristate "MELFAS MCS Touchkey"
426 depends on I2C
427 help
428 Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
429 chip in your system.
430
431 If unsure, say N.
432
433 To compile this driver as a module, choose M here: the
434 module will be called mcs_touchkey.
435
436config KEYBOARD_MPR121
437 tristate "Freescale MPR121 Touchkey"
438 depends on I2C
439 help
440 Say Y here if you have Freescale MPR121 touchkey controller
441 chip in your system.
442
443 If unsure, say N.
444
445 To compile this driver as a module, choose M here: the
446 module will be called mpr121_touchkey.
447
448config KEYBOARD_SNVS_PWRKEY
449 tristate "IMX SNVS Power Key Driver"
450 depends on ARCH_MXC || (COMPILE_TEST && HAS_IOMEM)
451 depends on OF
452 help
453 This is the snvs powerkey driver for the Freescale i.MX application
454 processors.
455
456 To compile this driver as a module, choose M here; the
457 module will be called snvs_pwrkey.
458
459config KEYBOARD_IMX
460 tristate "IMX keypad support"
461 depends on ARCH_MXC || COMPILE_TEST
462 select INPUT_MATRIXKMAP
463 help
464 Enable support for IMX keypad port.
465
466 To compile this driver as a module, choose M here: the
467 module will be called imx_keypad.
468
469config KEYBOARD_IMX_SC_KEY
470 tristate "IMX SCU Key Driver"
471 depends on IMX_SCU
472 help
473 This is the system controller key driver for NXP i.MX SoCs with
474 system controller inside.
475
476 To compile this driver as a module, choose M here: the
477 module will be called imx_sc_key.
478
479config KEYBOARD_NEWTON
480 tristate "Newton keyboard"
481 select SERIO
482 help
483 Say Y here if you have a Newton keyboard on a serial port.
484
485 To compile this driver as a module, choose M here: the
486 module will be called newtonkbd.
487
488config KEYBOARD_NOMADIK
489 tristate "ST-Ericsson Nomadik SKE keyboard"
490 depends on (ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST)
491 select INPUT_MATRIXKMAP
492 help
493 Say Y here if you want to use a keypad provided on the SKE controller
494 used on the Ux500 and Nomadik platforms
495
496 To compile this driver as a module, choose M here: the
497 module will be called nmk-ske-keypad.
498
499config KEYBOARD_NSPIRE
500 tristate "TI-NSPIRE built-in keyboard"
501 depends on ARCH_NSPIRE && OF
502 select INPUT_MATRIXKMAP
503 help
504 Say Y here if you want to use the built-in keypad on TI-NSPIRE.
505
506 To compile this driver as a module, choose M here: the
507 module will be called nspire-keypad.
508
509config KEYBOARD_TEGRA
510 tristate "NVIDIA Tegra internal matrix keyboard controller support"
511 depends on (ARCH_TEGRA && OF) || COMPILE_TEST
512 select INPUT_MATRIXKMAP
513 help
514 Say Y here if you want to use a matrix keyboard connected directly
515 to the internal keyboard controller on Tegra SoCs.
516
517 To compile this driver as a module, choose M here: the
518 module will be called tegra-kbc.
519
520config KEYBOARD_OPENCORES
521 tristate "OpenCores Keyboard Controller"
522 depends on HAS_IOMEM
523 help
524 Say Y here if you want to use the OpenCores Keyboard Controller
525 http://www.opencores.org/project,keyboardcontroller
526
527 To compile this driver as a module, choose M here; the
528 module will be called opencores-kbd.
529
530config KEYBOARD_PINEPHONE
531 tristate "Pine64 PinePhone Keyboard"
532 depends on I2C && REGULATOR
533 select CRC8
534 select INPUT_MATRIXKMAP
535 help
536 Say Y here to enable support for the keyboard in the Pine64 PinePhone
537 keyboard case. This driver supports the FLOSS firmware available at
538 https://megous.com/git/pinephone-keyboard/
539
540 To compile this driver as a module, choose M here; the
541 module will be called pinephone-keyboard.
542
543config KEYBOARD_PXA27x
544 tristate "PXA27x/PXA3xx keypad support"
545 depends on PXA27x || PXA3xx || ARCH_MMP || COMPILE_TEST
546 select INPUT_MATRIXKMAP
547 help
548 Enable support for PXA27x/PXA3xx keypad controller.
549
550 To compile this driver as a module, choose M here: the
551 module will be called pxa27x_keypad.
552
553config KEYBOARD_PXA930_ROTARY
554 tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
555 depends on CPU_PXA930 || CPU_PXA935
556 help
557 Enable support for PXA930/PXA935 Enhanced Rotary Controller.
558
559 To compile this driver as a module, choose M here: the
560 module will be called pxa930_rotary.
561
562config KEYBOARD_PMIC8XXX
563 tristate "Qualcomm PMIC8XXX keypad support"
564 depends on MFD_PM8XXX
565 select INPUT_MATRIXKMAP
566 help
567 Say Y here if you want to enable the driver for the PMIC8XXX
568 keypad provided as a reference design from Qualcomm. This is intended
569 to support upto 18x8 matrix based keypad design.
570
571 To compile this driver as a module, choose M here: the module will
572 be called pmic8xxx-keypad.
573
574config KEYBOARD_SAMSUNG
575 tristate "Samsung keypad support"
576 depends on HAS_IOMEM && HAVE_CLK
577 select INPUT_MATRIXKMAP
578 help
579 Say Y here if you want to use the keypad on your Samsung mobile
580 device.
581
582 To compile this driver as a module, choose M here: the
583 module will be called samsung-keypad.
584
585config KEYBOARD_GOLDFISH_EVENTS
586 depends on GOLDFISH || COMPILE_TEST
587 tristate "Generic Input Event device for Goldfish"
588 help
589 Say Y here to get an input event device for the Goldfish virtual
590 device emulator.
591
592 To compile this driver as a module, choose M here: the
593 module will be called goldfish-events.
594
595config KEYBOARD_STOWAWAY
596 tristate "Stowaway keyboard"
597 select SERIO
598 help
599 Say Y here if you have a Stowaway keyboard on a serial port.
600 Stowaway compatible keyboards like Dicota Input-PDA keyboard
601 are also supported by this driver.
602
603 To compile this driver as a module, choose M here: the
604 module will be called stowaway.
605
606config KEYBOARD_ST_KEYSCAN
607 tristate "STMicroelectronics keyscan support"
608 depends on ARCH_STI || COMPILE_TEST
609 select INPUT_MATRIXKMAP
610 help
611 Say Y here if you want to use a keypad attached to the keyscan block
612 on some STMicroelectronics SoC devices.
613
614 To compile this driver as a module, choose M here: the
615 module will be called st-keyscan.
616
617config KEYBOARD_SUNKBD
618 tristate "Sun Type 4 and Type 5 keyboard"
619 select SERIO
620 help
621 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
622 connected either to the Sun keyboard connector or to an serial
623 (RS-232) port via a simple adapter.
624
625 To compile this driver as a module, choose M here: the
626 module will be called sunkbd.
627
628config KEYBOARD_SH_KEYSC
629 tristate "SuperH KEYSC keypad support"
630 depends on ARCH_SHMOBILE || COMPILE_TEST
631 help
632 Say Y here if you want to use a keypad attached to the KEYSC block
633 on SuperH processors such as sh7722 and sh7343.
634
635 To compile this driver as a module, choose M here: the
636 module will be called sh_keysc.
637
638config KEYBOARD_STMPE
639 tristate "STMPE keypad support"
640 depends on MFD_STMPE
641 depends on OF
642 select INPUT_MATRIXKMAP
643 help
644 Say Y here if you want to use the keypad controller on STMPE I/O
645 expanders.
646
647 To compile this driver as a module, choose M here: the module will be
648 called stmpe-keypad.
649
650config KEYBOARD_SUN4I_LRADC
651 tristate "Allwinner sun4i low res adc attached tablet keys support"
652 depends on ARCH_SUNXI
653 help
654 This selects support for the Allwinner low res adc attached tablet
655 keys found on Allwinner sunxi SoCs.
656
657 To compile this driver as a module, choose M here: the
658 module will be called sun4i-lradc-keys.
659
660config KEYBOARD_DAVINCI
661 tristate "TI DaVinci Key Scan"
662 depends on ARCH_DAVINCI_DM365
663 help
664 Say Y to enable keypad module support for the TI DaVinci
665 platforms (DM365).
666
667 To compile this driver as a module, choose M here: the
668 module will be called davinci_keyscan.
669
670config KEYBOARD_IPAQ_MICRO
671 tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
672 depends on MFD_IPAQ_MICRO
673 help
674 Say Y to enable support for the buttons attached to
675 Micro peripheral controller on iPAQ h3100/h3600/h3700
676
677 To compile this driver as a module, choose M here: the
678 module will be called ipaq-micro-keys.
679
680config KEYBOARD_IQS62X
681 tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
682 depends on MFD_IQS62X
683 help
684 Say Y here to enable key and switch support for the Azoteq IQS620A,
685 IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
686
687 To compile this driver as a module, choose M here: the module will
688 be called iqs62x-keys.
689
690config KEYBOARD_OMAP
691 tristate "TI OMAP keypad support"
692 depends on ARCH_OMAP1
693 select INPUT_MATRIXKMAP
694 help
695 Say Y here if you want to use the OMAP keypad.
696
697 To compile this driver as a module, choose M here: the
698 module will be called omap-keypad.
699
700config KEYBOARD_OMAP4
701 tristate "TI OMAP4+ keypad support"
702 depends on (OF && HAS_IOMEM) || ARCH_OMAP2PLUS
703 select INPUT_MATRIXKMAP
704 help
705 Say Y here if you want to use the OMAP4+ keypad.
706
707 To compile this driver as a module, choose M here: the
708 module will be called omap4-keypad.
709
710config KEYBOARD_SPEAR
711 tristate "ST SPEAR keyboard support"
712 depends on PLAT_SPEAR || COMPILE_TEST
713 select INPUT_MATRIXKMAP
714 help
715 Say Y here if you want to use the SPEAR keyboard.
716
717 To compile this driver as a module, choose M here: the
718 module will be called spear-keyboard.
719
720config KEYBOARD_TC3589X
721 tristate "TC3589X Keypad support"
722 depends on MFD_TC3589X
723 select INPUT_MATRIXKMAP
724 help
725 Say Y here if you want to use the keypad controller on
726 TC35892/3 I/O expander.
727
728 To compile this driver as a module, choose M here: the
729 module will be called tc3589x-keypad.
730
731config KEYBOARD_TM2_TOUCHKEY
732 tristate "TM2 touchkey support"
733 depends on I2C
734 depends on LEDS_CLASS
735 help
736 Say Y here to enable device driver for tm2-touchkey with
737 LED control for the Exynos5433 TM2 board.
738
739 To compile this driver as a module, choose M here.
740 module will be called tm2-touchkey.
741
742config KEYBOARD_TWL4030
743 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
744 depends on TWL4030_CORE
745 select INPUT_MATRIXKMAP
746 help
747 Say Y here if your board use the keypad controller on
748 TWL4030 family chips. It's safe to say enable this
749 even on boards that don't use the keypad controller.
750
751 To compile this driver as a module, choose M here: the
752 module will be called twl4030_keypad.
753
754config KEYBOARD_XTKBD
755 tristate "XT keyboard"
756 select SERIO
757 help
758 Say Y here if you want to use the old IBM PC/XT keyboard (or
759 compatible) on your system. This is only possible with a
760 parallel port keyboard adapter, you cannot connect it to the
761 keyboard port on a PC that runs Linux.
762
763 To compile this driver as a module, choose M here: the
764 module will be called xtkbd.
765
766config KEYBOARD_CROS_EC
767 tristate "ChromeOS EC keyboard"
768 select INPUT_MATRIXKMAP
769 select INPUT_VIVALDIFMAP
770 depends on CROS_EC
771 help
772 Say Y here to enable the matrix keyboard used by ChromeOS devices
773 and implemented on the ChromeOS EC. You must enable one bus option
774 (CROS_EC_I2C or CROS_EC_SPI) to use this.
775
776 To compile this driver as a module, choose M here: the
777 module will be called cros_ec_keyb.
778
779config KEYBOARD_CAP11XX
780 tristate "Microchip CAP11XX based touch sensors"
781 depends on OF && I2C
782 select REGMAP_I2C
783 help
784 Say Y here to enable the CAP11XX touch sensor driver.
785
786 To compile this driver as a module, choose M here: the
787 module will be called cap11xx.
788
789config KEYBOARD_BCM
790 tristate "Broadcom keypad driver"
791 depends on OF && HAVE_CLK && HAS_IOMEM
792 select INPUT_MATRIXKMAP
793 default ARCH_BCM_CYGNUS
794 help
795 Say Y here if you want to use Broadcom keypad.
796
797 To compile this driver as a module, choose M here: the
798 module will be called bcm-keypad.
799
800config KEYBOARD_MT6779
801 tristate "MediaTek Keypad Support"
802 depends on ARCH_MEDIATEK || COMPILE_TEST
803 select REGMAP_MMIO
804 select INPUT_MATRIXKMAP
805 help
806 Say Y here if you want to use the keypad on MediaTek SoCs.
807 If unsure, say N.
808
809 To compile this driver as a module, choose M here: the
810 module will be called mt6779-keypad.
811
812config KEYBOARD_MTK_PMIC
813 tristate "MediaTek PMIC keys support"
814 depends on MFD_MT6397 || COMPILE_TEST
815 help
816 Say Y here if you want to use the pmic keys (powerkey/homekey).
817
818 To compile this driver as a module, choose M here: the
819 module will be called pmic-keys.
820
821config KEYBOARD_CYPRESS_SF
822 tristate "Cypress StreetFighter touchkey support"
823 depends on I2C
824 help
825 Say Y here if you want to enable support for Cypress StreetFighter
826 touchkeys.
827
828 To compile this driver as a module, choose M here: the
829 module will be called cypress-sf.
830
831endif
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Input core configuration
4#
5menuconfig INPUT_KEYBOARD
6 bool "Keyboards"
7 default y
8 help
9 Say Y here, and a list of supported keyboards will be displayed.
10 This option doesn't affect the kernel.
11
12 If unsure, say Y.
13
14if INPUT_KEYBOARD
15
16config KEYBOARD_ADC
17 tristate "ADC Ladder Buttons"
18 depends on IIO
19 help
20 This driver implements support for buttons connected
21 to an ADC using a resistor ladder.
22
23 Say Y here if your device has such buttons connected to an ADC. Your
24 board-specific setup logic must also provide a configuration data
25 for mapping voltages to buttons.
26
27 To compile this driver as a module, choose M here: the
28 module will be called adc_keys.
29
30config KEYBOARD_ADP5520
31 tristate "Keypad Support for ADP5520 PMIC"
32 depends on PMIC_ADP5520
33 help
34 This option enables support for the keypad scan matrix
35 on Analog Devices ADP5520 PMICs.
36
37 To compile this driver as a module, choose M here: the module will
38 be called adp5520-keys.
39
40config KEYBOARD_ADP5588
41 tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
42 depends on I2C
43 select GPIOLIB
44 select GPIOLIB_IRQCHIP
45 select INPUT_MATRIXKMAP
46 help
47 Say Y here if you want to use a ADP5588/87 attached to your
48 system I2C bus.
49
50 To compile this driver as a module, choose M here: the
51 module will be called adp5588-keys.
52
53config KEYBOARD_ADP5589
54 tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander"
55 depends on I2C
56 help
57 Say Y here if you want to use a ADP5585/ADP5589 attached to your
58 system I2C bus.
59
60 To compile this driver as a module, choose M here: the
61 module will be called adp5589-keys.
62
63config KEYBOARD_AMIGA
64 tristate "Amiga keyboard"
65 depends on AMIGA
66 help
67 Say Y here if you are running Linux on any AMIGA and have a keyboard
68 attached.
69
70 To compile this driver as a module, choose M here: the
71 module will be called amikbd.
72
73config KEYBOARD_APPLESPI
74 tristate "Apple SPI keyboard and trackpad"
75 depends on ACPI && EFI
76 depends on SPI
77 depends on X86 || COMPILE_TEST
78 depends on LEDS_CLASS
79 select CRC16
80 help
81 Say Y here if you are running Linux on any Apple MacBook8,1 or later,
82 or any MacBookPro13,* or MacBookPro14,*.
83
84 You will also need to enable appropriate SPI master controllers:
85 spi_pxa2xx_platform and spi_pxa2xx_pci for MacBook8,1, and
86 spi_pxa2xx_platform and intel_lpss_pci for the rest.
87
88 To compile this driver as a module, choose M here: the
89 module will be called applespi.
90
91config KEYBOARD_ATARI
92 tristate "Atari keyboard"
93 depends on ATARI
94 select ATARI_KBD_CORE
95 help
96 Say Y here if you are running Linux on any Atari and have a keyboard
97 attached.
98
99 To compile this driver as a module, choose M here: the
100 module will be called atakbd.
101
102config KEYBOARD_ATKBD
103 tristate "AT keyboard"
104 default y
105 select SERIO
106 select SERIO_LIBPS2
107 select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO
108 select SERIO_GSCPS2 if GSC
109 select INPUT_VIVALDIFMAP
110 help
111 Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
112 you'll need this, unless you have a different type keyboard (USB, ADB
113 or other). This also works for AT and PS/2 keyboards connected over a
114 PS/2 to serial converter.
115
116 If unsure, say Y.
117
118 To compile this driver as a module, choose M here: the
119 module will be called atkbd.
120
121config KEYBOARD_ATKBD_HP_KEYCODES
122 bool "Use HP keyboard scancodes"
123 depends on PARISC && KEYBOARD_ATKBD
124 default y
125 help
126 Say Y here if you have a PA-RISC machine and want to use an AT or
127 PS/2 keyboard, and your keyboard uses keycodes that are specific to
128 PA-RISC keyboards.
129
130 Say N if you use a standard keyboard.
131
132config KEYBOARD_ATKBD_RDI_KEYCODES
133 bool "Use PrecisionBook keyboard scancodes"
134 depends on KEYBOARD_ATKBD_HP_KEYCODES
135 default n
136 help
137 If you have an RDI PrecisionBook, say Y here if you want to use its
138 built-in keyboard (as opposed to an external keyboard).
139
140 The PrecisionBook has five keys that conflict with those used by most
141 AT and PS/2 keyboards. These are as follows:
142
143 PrecisionBook Standard AT or PS/2
144
145 F1 F12
146 Left Ctrl Left Alt
147 Caps Lock Left Ctrl
148 Right Ctrl Caps Lock
149 Left 102nd key (the key to the right of Left Shift)
150
151 If you say N here, and use the PrecisionBook keyboard, then each key
152 in the left-hand column will be interpreted as the corresponding key
153 in the right-hand column.
154
155 If you say Y here, and use an external keyboard, then each key in the
156 right-hand column will be interpreted as the key shown in the
157 left-hand column.
158
159config KEYBOARD_QT1050
160 tristate "Microchip AT42QT1050 Touch Sensor Chip"
161 depends on I2C
162 select REGMAP_I2C
163 help
164 Say Y here if you want to use Microchip AT42QT1050 QTouch
165 Sensor chip as input device.
166
167 To compile this driver as a module, choose M here:
168 the module will be called qt1050
169
170config KEYBOARD_QT1070
171 tristate "Atmel AT42QT1070 Touch Sensor Chip"
172 depends on I2C
173 help
174 Say Y here if you want to use Atmel AT42QT1070 QTouch
175 Sensor chip as input device.
176
177 To compile this driver as a module, choose M here:
178 the module will be called qt1070
179
180config KEYBOARD_QT2160
181 tristate "Atmel AT42QT2160 Touch Sensor Chip"
182 depends on I2C
183 help
184 If you say yes here you get support for Atmel AT42QT2160 Touch
185 Sensor chip as a keyboard input.
186
187 This driver can also be built as a module. If so, the module
188 will be called qt2160.
189
190config KEYBOARD_CLPS711X
191 tristate "CLPS711X Keypad support"
192 depends on ARCH_CLPS711X || COMPILE_TEST
193 select INPUT_MATRIXKMAP
194 help
195 Say Y here to enable the matrix keypad on the Cirrus Logic
196 CLPS711X CPUs.
197
198 To compile this driver as a module, choose M here: the
199 module will be called clps711x-keypad.
200
201config KEYBOARD_DLINK_DIR685
202 tristate "D-Link DIR-685 touchkeys support"
203 depends on I2C
204 default ARCH_GEMINI
205 help
206 If you say yes here you get support for the D-Link DIR-685
207 touchkeys.
208
209 To compile this driver as a module, choose M here: the
210 module will be called dlink-dir685-touchkeys.
211
212config KEYBOARD_LKKBD
213 tristate "DECstation/VAXstation LK201/LK401 keyboard"
214 select SERIO
215 help
216 Say Y here if you want to use a LK201 or LK401 style serial
217 keyboard. This keyboard is also usable on PCs if you attach
218 it with the inputattach program. The connector pinout is
219 described within lkkbd.c.
220
221 To compile this driver as a module, choose M here: the
222 module will be called lkkbd.
223
224config KEYBOARD_EP93XX
225 tristate "EP93xx Matrix Keypad support"
226 depends on ARCH_EP93XX || COMPILE_TEST
227 select INPUT_MATRIXKMAP
228 help
229 Say Y here to enable the matrix keypad on the Cirrus EP93XX.
230
231 To compile this driver as a module, choose M here: the
232 module will be called ep93xx_keypad.
233
234config KEYBOARD_GPIO
235 tristate "GPIO Buttons"
236 depends on GPIOLIB || COMPILE_TEST
237 help
238 This driver implements support for buttons connected
239 to GPIO pins of various CPUs (and some other chips).
240
241 Say Y here if your device has buttons connected
242 directly to such GPIO pins. Your board-specific
243 setup logic must also provide a platform device,
244 with configuration data saying which GPIOs are used.
245
246 To compile this driver as a module, choose M here: the
247 module will be called gpio_keys.
248
249config KEYBOARD_GPIO_POLLED
250 tristate "Polled GPIO buttons"
251 depends on GPIOLIB
252 help
253 This driver implements support for buttons connected
254 to GPIO pins that are not capable of generating interrupts.
255
256 Say Y here if your device has buttons connected
257 directly to such GPIO pins. Your board-specific
258 setup logic must also provide a platform device,
259 with configuration data saying which GPIOs are used.
260
261 To compile this driver as a module, choose M here: the
262 module will be called gpio_keys_polled.
263
264config KEYBOARD_TCA6416
265 tristate "TCA6416/TCA6408A Keypad Support"
266 depends on I2C
267 help
268 This driver implements basic keypad functionality
269 for keys connected through TCA6416/TCA6408A IO expanders.
270
271 Say Y here if your device has keys connected to
272 TCA6416/TCA6408A IO expander. Your board-specific setup logic
273 must also provide pin-mask details(of which TCA6416 pins
274 are used for keypad).
275
276 If enabled the entire TCA6416 device will be managed through
277 this driver.
278
279 To compile this driver as a module, choose M here: the
280 module will be called tca6416_keypad.
281
282config KEYBOARD_TCA8418
283 tristate "TCA8418 Keypad Support"
284 depends on I2C
285 select INPUT_MATRIXKMAP
286 help
287 This driver implements basic keypad functionality
288 for keys connected through TCA8418 keypad decoder.
289
290 Say Y here if your device has keys connected to
291 TCA8418 keypad decoder.
292
293 If enabled the complete TCA8418 device will be managed through
294 this driver.
295
296 To compile this driver as a module, choose M here: the
297 module will be called tca8418_keypad.
298
299config KEYBOARD_MATRIX
300 tristate "GPIO driven matrix keypad support"
301 depends on GPIOLIB || COMPILE_TEST
302 select INPUT_MATRIXKMAP
303 help
304 Enable support for GPIO driven matrix keypad.
305
306 To compile this driver as a module, choose M here: the
307 module will be called matrix_keypad.
308
309config KEYBOARD_HIL_OLD
310 tristate "HP HIL keyboard support (simple driver)"
311 depends on GSC || HP300
312 default y
313 help
314 The "Human Interface Loop" is a older, 8-channel USB-like
315 controller used in several Hewlett Packard models. This driver
316 was adapted from the one written for m68k/hp300, and implements
317 support for a keyboard attached to the HIL port, but not for
318 any other types of HIL input devices like mice or tablets.
319 However, it has been thoroughly tested and is stable.
320
321 If you want full HIL support including support for multiple
322 keyboards, mice, and tablets, you have to enable the
323 "HP System Device Controller i8042 Support" in the input/serio
324 submenu.
325
326config KEYBOARD_HIL
327 tristate "HP HIL keyboard/pointer support"
328 depends on GSC || HP300
329 default y
330 select HP_SDC
331 select HIL_MLC
332 select SERIO
333 help
334 The "Human Interface Loop" is a older, 8-channel USB-like
335 controller used in several Hewlett Packard models.
336 This driver implements support for HIL-keyboards and pointing
337 devices (mice, tablets, touchscreens) attached
338 to your machine, so normally you should say Y here.
339
340config KEYBOARD_HP6XX
341 tristate "HP Jornada 6xx keyboard"
342 depends on SH_HP6XX
343 help
344 Say Y here if you have a HP Jornada 620/660/680/690 and want to
345 support the built-in keyboard.
346
347 To compile this driver as a module, choose M here: the
348 module will be called jornada680_kbd.
349
350config KEYBOARD_HP7XX
351 tristate "HP Jornada 7xx keyboard"
352 depends on SA1100_JORNADA720_SSP && SA1100_SSP
353 help
354 Say Y here if you have a HP Jornada 710/720/728 and want to
355 support the built-in keyboard.
356
357 To compile this driver as a module, choose M here: the
358 module will be called jornada720_kbd.
359
360config KEYBOARD_LM8323
361 tristate "LM8323 keypad chip"
362 depends on I2C
363 depends on LEDS_CLASS
364 help
365 If you say yes here you get support for the National Semiconductor
366 LM8323 keypad controller.
367
368 To compile this driver as a module, choose M here: the
369 module will be called lm8323.
370
371config KEYBOARD_LM8333
372 tristate "LM8333 keypad chip"
373 depends on I2C
374 select INPUT_MATRIXKMAP
375 help
376 If you say yes here you get support for the National Semiconductor
377 LM8333 keypad controller.
378
379 To compile this driver as a module, choose M here: the
380 module will be called lm8333.
381
382config KEYBOARD_LOCOMO
383 tristate "LoCoMo Keyboard Support"
384 depends on SHARP_LOCOMO
385 help
386 Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
387
388 To compile this driver as a module, choose M here: the
389 module will be called locomokbd.
390
391config KEYBOARD_LPC32XX
392 tristate "LPC32XX matrix key scanner support"
393 depends on (ARCH_LPC32XX && OF) || COMPILE_TEST
394 select INPUT_MATRIXKMAP
395 help
396 Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
397 connected to a key matrix.
398
399 To compile this driver as a module, choose M here: the
400 module will be called lpc32xx-keys.
401
402config KEYBOARD_MAPLE
403 tristate "Maple bus keyboard"
404 depends on SH_DREAMCAST && MAPLE
405 help
406 Say Y here if you have a Dreamcast console running Linux and have
407 a keyboard attached to its Maple bus.
408
409 To compile this driver as a module, choose M here: the
410 module will be called maple_keyb.
411
412config KEYBOARD_MAX7359
413 tristate "Maxim MAX7359 Key Switch Controller"
414 select INPUT_MATRIXKMAP
415 depends on I2C
416 help
417 If you say yes here you get support for the Maxim MAX7359 Key
418 Switch Controller chip. This providers microprocessors with
419 management of up to 64 key switches
420
421 To compile this driver as a module, choose M here: the
422 module will be called max7359_keypad.
423
424config KEYBOARD_MCS
425 tristate "MELFAS MCS Touchkey"
426 depends on I2C
427 help
428 Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
429 chip in your system.
430
431 If unsure, say N.
432
433 To compile this driver as a module, choose M here: the
434 module will be called mcs_touchkey.
435
436config KEYBOARD_MPR121
437 tristate "Freescale MPR121 Touchkey"
438 depends on I2C
439 help
440 Say Y here if you have Freescale MPR121 touchkey controller
441 chip in your system.
442
443 If unsure, say N.
444
445 To compile this driver as a module, choose M here: the
446 module will be called mpr121_touchkey.
447
448config KEYBOARD_SNVS_PWRKEY
449 tristate "IMX SNVS Power Key Driver"
450 depends on ARCH_MXC || (COMPILE_TEST && HAS_IOMEM)
451 depends on OF
452 help
453 This is the snvs powerkey driver for the Freescale i.MX application
454 processors.
455
456 To compile this driver as a module, choose M here; the
457 module will be called snvs_pwrkey.
458
459config KEYBOARD_IMX
460 tristate "IMX keypad support"
461 depends on ARCH_MXC || COMPILE_TEST
462 select INPUT_MATRIXKMAP
463 help
464 Enable support for IMX keypad port.
465
466 To compile this driver as a module, choose M here: the
467 module will be called imx_keypad.
468
469config KEYBOARD_IMX_SC_KEY
470 tristate "IMX SCU Key Driver"
471 depends on IMX_SCU
472 help
473 This is the system controller key driver for NXP i.MX SoCs with
474 system controller inside.
475
476 To compile this driver as a module, choose M here: the
477 module will be called imx_sc_key.
478
479config KEYBOARD_NEWTON
480 tristate "Newton keyboard"
481 select SERIO
482 help
483 Say Y here if you have a Newton keyboard on a serial port.
484
485 To compile this driver as a module, choose M here: the
486 module will be called newtonkbd.
487
488config KEYBOARD_NOMADIK
489 tristate "ST-Ericsson Nomadik SKE keyboard"
490 depends on (ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST)
491 select INPUT_MATRIXKMAP
492 help
493 Say Y here if you want to use a keypad provided on the SKE controller
494 used on the Ux500 and Nomadik platforms
495
496 To compile this driver as a module, choose M here: the
497 module will be called nmk-ske-keypad.
498
499config KEYBOARD_NSPIRE
500 tristate "TI-NSPIRE built-in keyboard"
501 depends on ARCH_NSPIRE && OF
502 select INPUT_MATRIXKMAP
503 help
504 Say Y here if you want to use the built-in keypad on TI-NSPIRE.
505
506 To compile this driver as a module, choose M here: the
507 module will be called nspire-keypad.
508
509config KEYBOARD_TEGRA
510 tristate "NVIDIA Tegra internal matrix keyboard controller support"
511 depends on (ARCH_TEGRA && OF) || COMPILE_TEST
512 select INPUT_MATRIXKMAP
513 help
514 Say Y here if you want to use a matrix keyboard connected directly
515 to the internal keyboard controller on Tegra SoCs.
516
517 To compile this driver as a module, choose M here: the
518 module will be called tegra-kbc.
519
520config KEYBOARD_OPENCORES
521 tristate "OpenCores Keyboard Controller"
522 depends on HAS_IOMEM
523 help
524 Say Y here if you want to use the OpenCores Keyboard Controller
525 http://www.opencores.org/project,keyboardcontroller
526
527 To compile this driver as a module, choose M here; the
528 module will be called opencores-kbd.
529
530config KEYBOARD_PINEPHONE
531 tristate "Pine64 PinePhone Keyboard"
532 depends on I2C && REGULATOR
533 select CRC8
534 select INPUT_MATRIXKMAP
535 help
536 Say Y here to enable support for the keyboard in the Pine64 PinePhone
537 keyboard case. This driver supports the FLOSS firmware available at
538 https://megous.com/git/pinephone-keyboard/
539
540 To compile this driver as a module, choose M here; the
541 module will be called pinephone-keyboard.
542
543config KEYBOARD_PXA27x
544 tristate "PXA27x/PXA3xx keypad support"
545 depends on PXA27x || PXA3xx || ARCH_MMP || COMPILE_TEST
546 select INPUT_MATRIXKMAP
547 help
548 Enable support for PXA27x/PXA3xx keypad controller.
549
550 To compile this driver as a module, choose M here: the
551 module will be called pxa27x_keypad.
552
553config KEYBOARD_PMIC8XXX
554 tristate "Qualcomm PMIC8XXX keypad support"
555 depends on MFD_PM8XXX
556 select INPUT_MATRIXKMAP
557 help
558 Say Y here if you want to enable the driver for the PMIC8XXX
559 keypad provided as a reference design from Qualcomm. This is intended
560 to support up to 18x8 matrix-based keypad design.
561
562 To compile this driver as a module, choose M here: the module will
563 be called pmic8xxx-keypad.
564
565config KEYBOARD_SAMSUNG
566 tristate "Samsung keypad support"
567 depends on HAS_IOMEM && HAVE_CLK
568 select INPUT_MATRIXKMAP
569 help
570 Say Y here if you want to use the keypad on your Samsung mobile
571 device.
572
573 To compile this driver as a module, choose M here: the
574 module will be called samsung-keypad.
575
576config KEYBOARD_GOLDFISH_EVENTS
577 depends on GOLDFISH || COMPILE_TEST
578 tristate "Generic Input Event device for Goldfish"
579 help
580 Say Y here to get an input event device for the Goldfish virtual
581 device emulator.
582
583 To compile this driver as a module, choose M here: the
584 module will be called goldfish-events.
585
586config KEYBOARD_STOWAWAY
587 tristate "Stowaway keyboard"
588 select SERIO
589 help
590 Say Y here if you have a Stowaway keyboard on a serial port.
591 Stowaway compatible keyboards like Dicota Input-PDA keyboard
592 are also supported by this driver.
593
594 To compile this driver as a module, choose M here: the
595 module will be called stowaway.
596
597config KEYBOARD_ST_KEYSCAN
598 tristate "STMicroelectronics keyscan support"
599 depends on ARCH_STI || COMPILE_TEST
600 select INPUT_MATRIXKMAP
601 help
602 Say Y here if you want to use a keypad attached to the keyscan block
603 on some STMicroelectronics SoC devices.
604
605 To compile this driver as a module, choose M here: the
606 module will be called st-keyscan.
607
608config KEYBOARD_SUNKBD
609 tristate "Sun Type 4 and Type 5 keyboard"
610 select SERIO
611 help
612 Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
613 connected either to the Sun keyboard connector or to an serial
614 (RS-232) port via a simple adapter.
615
616 To compile this driver as a module, choose M here: the
617 module will be called sunkbd.
618
619config KEYBOARD_SH_KEYSC
620 tristate "SuperH KEYSC keypad support"
621 depends on ARCH_SHMOBILE || COMPILE_TEST
622 help
623 Say Y here if you want to use a keypad attached to the KEYSC block
624 on SuperH processors such as sh7722 and sh7343.
625
626 To compile this driver as a module, choose M here: the
627 module will be called sh_keysc.
628
629config KEYBOARD_STMPE
630 tristate "STMPE keypad support"
631 depends on MFD_STMPE
632 depends on OF
633 select INPUT_MATRIXKMAP
634 help
635 Say Y here if you want to use the keypad controller on STMPE I/O
636 expanders.
637
638 To compile this driver as a module, choose M here: the module will be
639 called stmpe-keypad.
640
641config KEYBOARD_SUN4I_LRADC
642 tristate "Allwinner sun4i low res adc attached tablet keys support"
643 depends on ARCH_SUNXI
644 help
645 This selects support for the Allwinner low res adc attached tablet
646 keys found on Allwinner sunxi SoCs.
647
648 To compile this driver as a module, choose M here: the
649 module will be called sun4i-lradc-keys.
650
651config KEYBOARD_IPAQ_MICRO
652 tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
653 depends on MFD_IPAQ_MICRO
654 help
655 Say Y to enable support for the buttons attached to
656 Micro peripheral controller on iPAQ h3100/h3600/h3700
657
658 To compile this driver as a module, choose M here: the
659 module will be called ipaq-micro-keys.
660
661config KEYBOARD_IQS62X
662 tristate "Azoteq IQS620A/621/622/624/625 keys and switches"
663 depends on MFD_IQS62X
664 help
665 Say Y here to enable key and switch support for the Azoteq IQS620A,
666 IQS621, IQS622, IQS624 and IQS625 multi-function sensors.
667
668 To compile this driver as a module, choose M here: the module will
669 be called iqs62x-keys.
670
671config KEYBOARD_OMAP
672 tristate "TI OMAP keypad support"
673 depends on ARCH_OMAP1
674 select INPUT_MATRIXKMAP
675 help
676 Say Y here if you want to use the OMAP keypad.
677
678 To compile this driver as a module, choose M here: the
679 module will be called omap-keypad.
680
681config KEYBOARD_OMAP4
682 tristate "TI OMAP4+ keypad support"
683 depends on (OF && HAS_IOMEM) || ARCH_OMAP2PLUS
684 select INPUT_MATRIXKMAP
685 help
686 Say Y here if you want to use the OMAP4+ keypad.
687
688 To compile this driver as a module, choose M here: the
689 module will be called omap4-keypad.
690
691config KEYBOARD_SPEAR
692 tristate "ST SPEAR keyboard support"
693 depends on PLAT_SPEAR || COMPILE_TEST
694 select INPUT_MATRIXKMAP
695 help
696 Say Y here if you want to use the SPEAR keyboard.
697
698 To compile this driver as a module, choose M here: the
699 module will be called spear-keyboard.
700
701config KEYBOARD_TC3589X
702 tristate "TC3589X Keypad support"
703 depends on MFD_TC3589X
704 select INPUT_MATRIXKMAP
705 help
706 Say Y here if you want to use the keypad controller on
707 TC35892/3 I/O expander.
708
709 To compile this driver as a module, choose M here: the
710 module will be called tc3589x-keypad.
711
712config KEYBOARD_TM2_TOUCHKEY
713 tristate "TM2 touchkey support"
714 depends on I2C
715 depends on LEDS_CLASS
716 help
717 Say Y here to enable device driver for tm2-touchkey with
718 LED control for the Exynos5433 TM2 board.
719
720 To compile this driver as a module, choose M here.
721 module will be called tm2-touchkey.
722
723config KEYBOARD_TWL4030
724 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
725 depends on TWL4030_CORE
726 select INPUT_MATRIXKMAP
727 help
728 Say Y here if your board use the keypad controller on
729 TWL4030 family chips. It's safe to say enable this
730 even on boards that don't use the keypad controller.
731
732 To compile this driver as a module, choose M here: the
733 module will be called twl4030_keypad.
734
735config KEYBOARD_XTKBD
736 tristate "XT keyboard"
737 select SERIO
738 help
739 Say Y here if you want to use the old IBM PC/XT keyboard (or
740 compatible) on your system. This is only possible with a
741 parallel port keyboard adapter, you cannot connect it to the
742 keyboard port on a PC that runs Linux.
743
744 To compile this driver as a module, choose M here: the
745 module will be called xtkbd.
746
747config KEYBOARD_CROS_EC
748 tristate "ChromeOS EC keyboard"
749 select INPUT_MATRIXKMAP
750 select INPUT_VIVALDIFMAP
751 depends on CROS_EC
752 help
753 Say Y here to enable the matrix keyboard used by ChromeOS devices
754 and implemented on the ChromeOS EC. You must enable one bus option
755 (CROS_EC_I2C or CROS_EC_SPI) to use this.
756
757 To compile this driver as a module, choose M here: the
758 module will be called cros_ec_keyb.
759
760config KEYBOARD_CAP11XX
761 tristate "Microchip CAP11XX based touch sensors"
762 depends on OF && I2C
763 select REGMAP_I2C
764 help
765 Say Y here to enable the CAP11XX touch sensor driver.
766
767 To compile this driver as a module, choose M here: the
768 module will be called cap11xx.
769
770config KEYBOARD_BCM
771 tristate "Broadcom keypad driver"
772 depends on OF && HAVE_CLK && HAS_IOMEM
773 select INPUT_MATRIXKMAP
774 default ARCH_BCM_CYGNUS
775 help
776 Say Y here if you want to use Broadcom keypad.
777
778 To compile this driver as a module, choose M here: the
779 module will be called bcm-keypad.
780
781config KEYBOARD_MT6779
782 tristate "MediaTek Keypad Support"
783 depends on ARCH_MEDIATEK || COMPILE_TEST
784 select REGMAP_MMIO
785 select INPUT_MATRIXKMAP
786 help
787 Say Y here if you want to use the keypad on MediaTek SoCs.
788 If unsure, say N.
789
790 To compile this driver as a module, choose M here: the
791 module will be called mt6779-keypad.
792
793config KEYBOARD_MTK_PMIC
794 tristate "MediaTek PMIC keys support"
795 depends on MFD_MT6397 || COMPILE_TEST
796 help
797 Say Y here if you want to use the pmic keys (powerkey/homekey).
798
799 To compile this driver as a module, choose M here: the
800 module will be called pmic-keys.
801
802config KEYBOARD_CYPRESS_SF
803 tristate "Cypress StreetFighter touchkey support"
804 depends on I2C
805 help
806 Say Y here if you want to enable support for Cypress StreetFighter
807 touchkeys.
808
809 To compile this driver as a module, choose M here: the
810 module will be called cypress-sf.
811
812endif