Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2018 Spreadtrum Communications Inc.
4 * Copyright (C) 2018 Linaro Ltd.
5 */
6
7#include <linux/bitops.h>
8#include <linux/gpio/driver.h>
9#include <linux/interrupt.h>
10#include <linux/kernel.h>
11#include <linux/module.h>
12#include <linux/of_device.h>
13#include <linux/platform_device.h>
14#include <linux/spinlock.h>
15
16/* EIC registers definition */
17#define SPRD_EIC_DBNC_DATA 0x0
18#define SPRD_EIC_DBNC_DMSK 0x4
19#define SPRD_EIC_DBNC_IEV 0x14
20#define SPRD_EIC_DBNC_IE 0x18
21#define SPRD_EIC_DBNC_RIS 0x1c
22#define SPRD_EIC_DBNC_MIS 0x20
23#define SPRD_EIC_DBNC_IC 0x24
24#define SPRD_EIC_DBNC_TRIG 0x28
25#define SPRD_EIC_DBNC_CTRL0 0x40
26
27#define SPRD_EIC_LATCH_INTEN 0x0
28#define SPRD_EIC_LATCH_INTRAW 0x4
29#define SPRD_EIC_LATCH_INTMSK 0x8
30#define SPRD_EIC_LATCH_INTCLR 0xc
31#define SPRD_EIC_LATCH_INTPOL 0x10
32#define SPRD_EIC_LATCH_INTMODE 0x14
33
34#define SPRD_EIC_ASYNC_INTIE 0x0
35#define SPRD_EIC_ASYNC_INTRAW 0x4
36#define SPRD_EIC_ASYNC_INTMSK 0x8
37#define SPRD_EIC_ASYNC_INTCLR 0xc
38#define SPRD_EIC_ASYNC_INTMODE 0x10
39#define SPRD_EIC_ASYNC_INTBOTH 0x14
40#define SPRD_EIC_ASYNC_INTPOL 0x18
41#define SPRD_EIC_ASYNC_DATA 0x1c
42
43#define SPRD_EIC_SYNC_INTIE 0x0
44#define SPRD_EIC_SYNC_INTRAW 0x4
45#define SPRD_EIC_SYNC_INTMSK 0x8
46#define SPRD_EIC_SYNC_INTCLR 0xc
47#define SPRD_EIC_SYNC_INTMODE 0x10
48#define SPRD_EIC_SYNC_INTBOTH 0x14
49#define SPRD_EIC_SYNC_INTPOL 0x18
50#define SPRD_EIC_SYNC_DATA 0x1c
51
52/*
53 * The digital-chip EIC controller can support maximum 3 banks, and each bank
54 * contains 8 EICs.
55 */
56#define SPRD_EIC_MAX_BANK 3
57#define SPRD_EIC_PER_BANK_NR 8
58#define SPRD_EIC_DATA_MASK GENMASK(7, 0)
59#define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1))
60#define SPRD_EIC_DBNC_MASK GENMASK(11, 0)
61
62/*
63 * The Spreadtrum EIC (external interrupt controller) can be used only in
64 * input mode to generate interrupts if detecting input signals.
65 *
66 * The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
67 * debounce EIC, latch EIC, async EIC and sync EIC,
68 *
69 * The debounce EIC is used to capture the input signals' stable status
70 * (millisecond resolution) and a single-trigger mechanism is introduced
71 * into this sub-module to enhance the input event detection reliability.
72 * The debounce range is from 1ms to 4s with a step size of 1ms.
73 *
74 * The latch EIC is used to latch some special power down signals and
75 * generate interrupts, since the latch EIC does not depend on the APB clock
76 * to capture signals.
77 *
78 * The async EIC uses a 32k clock to capture the short signals (microsecond
79 * resolution) to generate interrupts by level or edge trigger.
80 *
81 * The EIC-sync is similar with GPIO's input function, which is a synchronized
82 * signal input register.
83 */
84enum sprd_eic_type {
85 SPRD_EIC_DEBOUNCE,
86 SPRD_EIC_LATCH,
87 SPRD_EIC_ASYNC,
88 SPRD_EIC_SYNC,
89 SPRD_EIC_MAX,
90};
91
92struct sprd_eic {
93 struct gpio_chip chip;
94 void __iomem *base[SPRD_EIC_MAX_BANK];
95 enum sprd_eic_type type;
96 spinlock_t lock;
97 int irq;
98};
99
100struct sprd_eic_variant_data {
101 enum sprd_eic_type type;
102 u32 num_eics;
103};
104
105static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
106 "eic-debounce", "eic-latch", "eic-async",
107 "eic-sync",
108};
109
110static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
111 .type = SPRD_EIC_DEBOUNCE,
112 .num_eics = 8,
113};
114
115static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
116 .type = SPRD_EIC_LATCH,
117 .num_eics = 8,
118};
119
120static const struct sprd_eic_variant_data sc9860_eic_async_data = {
121 .type = SPRD_EIC_ASYNC,
122 .num_eics = 8,
123};
124
125static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
126 .type = SPRD_EIC_SYNC,
127 .num_eics = 8,
128};
129
130static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
131 unsigned int bank)
132{
133 if (bank >= SPRD_EIC_MAX_BANK)
134 return NULL;
135
136 return sprd_eic->base[bank];
137}
138
139static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
140 u16 reg, unsigned int val)
141{
142 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
143 void __iomem *base =
144 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
145 unsigned long flags;
146 u32 tmp;
147
148 spin_lock_irqsave(&sprd_eic->lock, flags);
149 tmp = readl_relaxed(base + reg);
150
151 if (val)
152 tmp |= BIT(SPRD_EIC_BIT(offset));
153 else
154 tmp &= ~BIT(SPRD_EIC_BIT(offset));
155
156 writel_relaxed(tmp, base + reg);
157 spin_unlock_irqrestore(&sprd_eic->lock, flags);
158}
159
160static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
161{
162 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
163 void __iomem *base =
164 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
165
166 return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
167}
168
169static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
170{
171 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
172 return 0;
173}
174
175static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
176{
177 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
178}
179
180static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
181{
182 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
183
184 switch (sprd_eic->type) {
185 case SPRD_EIC_DEBOUNCE:
186 return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
187 case SPRD_EIC_ASYNC:
188 return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA);
189 case SPRD_EIC_SYNC:
190 return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA);
191 default:
192 return -ENOTSUPP;
193 }
194}
195
196static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
197{
198 /* EICs are always input, nothing need to do here. */
199 return 0;
200}
201
202static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
203{
204 /* EICs are always input, nothing need to do here. */
205}
206
207static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
208 unsigned int debounce)
209{
210 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
211 void __iomem *base =
212 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
213 u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
214 u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
215
216 value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
217 writel_relaxed(value, base + reg);
218
219 return 0;
220}
221
222static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
223 unsigned long config)
224{
225 unsigned long param = pinconf_to_config_param(config);
226 u32 arg = pinconf_to_config_argument(config);
227
228 if (param == PIN_CONFIG_INPUT_DEBOUNCE)
229 return sprd_eic_set_debounce(chip, offset, arg);
230
231 return -ENOTSUPP;
232}
233
234static void sprd_eic_irq_mask(struct irq_data *data)
235{
236 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
237 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
238 u32 offset = irqd_to_hwirq(data);
239
240 switch (sprd_eic->type) {
241 case SPRD_EIC_DEBOUNCE:
242 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
243 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
244 break;
245 case SPRD_EIC_LATCH:
246 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
247 break;
248 case SPRD_EIC_ASYNC:
249 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
250 break;
251 case SPRD_EIC_SYNC:
252 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
253 break;
254 default:
255 dev_err(chip->parent, "Unsupported EIC type.\n");
256 }
257
258 gpiochip_disable_irq(chip, offset);
259}
260
261static void sprd_eic_irq_unmask(struct irq_data *data)
262{
263 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
264 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
265 u32 offset = irqd_to_hwirq(data);
266
267 gpiochip_enable_irq(chip, offset);
268
269 switch (sprd_eic->type) {
270 case SPRD_EIC_DEBOUNCE:
271 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
272 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
273 break;
274 case SPRD_EIC_LATCH:
275 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
276 break;
277 case SPRD_EIC_ASYNC:
278 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
279 break;
280 case SPRD_EIC_SYNC:
281 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
282 break;
283 default:
284 dev_err(chip->parent, "Unsupported EIC type.\n");
285 }
286}
287
288static void sprd_eic_irq_ack(struct irq_data *data)
289{
290 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
291 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
292 u32 offset = irqd_to_hwirq(data);
293
294 switch (sprd_eic->type) {
295 case SPRD_EIC_DEBOUNCE:
296 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
297 break;
298 case SPRD_EIC_LATCH:
299 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
300 break;
301 case SPRD_EIC_ASYNC:
302 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
303 break;
304 case SPRD_EIC_SYNC:
305 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
306 break;
307 default:
308 dev_err(chip->parent, "Unsupported EIC type.\n");
309 }
310}
311
312static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
313{
314 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
315 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
316 u32 offset = irqd_to_hwirq(data);
317 int state;
318
319 switch (sprd_eic->type) {
320 case SPRD_EIC_DEBOUNCE:
321 switch (flow_type) {
322 case IRQ_TYPE_LEVEL_HIGH:
323 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
324 break;
325 case IRQ_TYPE_LEVEL_LOW:
326 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
327 break;
328 case IRQ_TYPE_EDGE_RISING:
329 case IRQ_TYPE_EDGE_FALLING:
330 case IRQ_TYPE_EDGE_BOTH:
331 state = sprd_eic_get(chip, offset);
332 if (state)
333 sprd_eic_update(chip, offset,
334 SPRD_EIC_DBNC_IEV, 0);
335 else
336 sprd_eic_update(chip, offset,
337 SPRD_EIC_DBNC_IEV, 1);
338 break;
339 default:
340 return -ENOTSUPP;
341 }
342
343 irq_set_handler_locked(data, handle_level_irq);
344 break;
345 case SPRD_EIC_LATCH:
346 switch (flow_type) {
347 case IRQ_TYPE_LEVEL_HIGH:
348 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
349 break;
350 case IRQ_TYPE_LEVEL_LOW:
351 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
352 break;
353 case IRQ_TYPE_EDGE_RISING:
354 case IRQ_TYPE_EDGE_FALLING:
355 case IRQ_TYPE_EDGE_BOTH:
356 state = sprd_eic_get(chip, offset);
357 if (state)
358 sprd_eic_update(chip, offset,
359 SPRD_EIC_LATCH_INTPOL, 0);
360 else
361 sprd_eic_update(chip, offset,
362 SPRD_EIC_LATCH_INTPOL, 1);
363 break;
364 default:
365 return -ENOTSUPP;
366 }
367
368 irq_set_handler_locked(data, handle_level_irq);
369 break;
370 case SPRD_EIC_ASYNC:
371 switch (flow_type) {
372 case IRQ_TYPE_EDGE_RISING:
373 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
374 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
375 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
376 irq_set_handler_locked(data, handle_edge_irq);
377 break;
378 case IRQ_TYPE_EDGE_FALLING:
379 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
380 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
381 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
382 irq_set_handler_locked(data, handle_edge_irq);
383 break;
384 case IRQ_TYPE_EDGE_BOTH:
385 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
386 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
387 irq_set_handler_locked(data, handle_edge_irq);
388 break;
389 case IRQ_TYPE_LEVEL_HIGH:
390 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
391 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
392 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
393 irq_set_handler_locked(data, handle_level_irq);
394 break;
395 case IRQ_TYPE_LEVEL_LOW:
396 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
397 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
398 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
399 irq_set_handler_locked(data, handle_level_irq);
400 break;
401 default:
402 return -ENOTSUPP;
403 }
404 break;
405 case SPRD_EIC_SYNC:
406 switch (flow_type) {
407 case IRQ_TYPE_EDGE_RISING:
408 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
409 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
410 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
411 irq_set_handler_locked(data, handle_edge_irq);
412 break;
413 case IRQ_TYPE_EDGE_FALLING:
414 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
415 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
416 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
417 irq_set_handler_locked(data, handle_edge_irq);
418 break;
419 case IRQ_TYPE_EDGE_BOTH:
420 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
421 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
422 irq_set_handler_locked(data, handle_edge_irq);
423 break;
424 case IRQ_TYPE_LEVEL_HIGH:
425 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
426 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
427 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
428 irq_set_handler_locked(data, handle_level_irq);
429 break;
430 case IRQ_TYPE_LEVEL_LOW:
431 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
432 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
433 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
434 irq_set_handler_locked(data, handle_level_irq);
435 break;
436 default:
437 return -ENOTSUPP;
438 }
439 break;
440 default:
441 dev_err(chip->parent, "Unsupported EIC type.\n");
442 return -ENOTSUPP;
443 }
444
445 return 0;
446}
447
448static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
449 unsigned int offset)
450{
451 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
452 struct irq_data *data = irq_get_irq_data(irq);
453 u32 trigger = irqd_get_trigger_type(data);
454 int state, post_state;
455
456 /*
457 * The debounce EIC and latch EIC can only support level trigger, so we
458 * can toggle the level trigger to emulate the edge trigger.
459 */
460 if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
461 sprd_eic->type != SPRD_EIC_LATCH) ||
462 !(trigger & IRQ_TYPE_EDGE_BOTH))
463 return;
464
465 sprd_eic_irq_mask(data);
466 state = sprd_eic_get(chip, offset);
467
468retry:
469 switch (sprd_eic->type) {
470 case SPRD_EIC_DEBOUNCE:
471 if (state)
472 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
473 else
474 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
475 break;
476 case SPRD_EIC_LATCH:
477 if (state)
478 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
479 else
480 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
481 break;
482 default:
483 sprd_eic_irq_unmask(data);
484 return;
485 }
486
487 post_state = sprd_eic_get(chip, offset);
488 if (state != post_state) {
489 dev_warn(chip->parent, "EIC level was changed.\n");
490 state = post_state;
491 goto retry;
492 }
493
494 sprd_eic_irq_unmask(data);
495}
496
497static int sprd_eic_match_chip_by_type(struct gpio_chip *chip, void *data)
498{
499 enum sprd_eic_type type = *(enum sprd_eic_type *)data;
500
501 return !strcmp(chip->label, sprd_eic_label_name[type]);
502}
503
504static void sprd_eic_handle_one_type(struct gpio_chip *chip)
505{
506 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
507 u32 bank, n, girq;
508
509 for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
510 void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
511 unsigned long reg;
512
513 switch (sprd_eic->type) {
514 case SPRD_EIC_DEBOUNCE:
515 reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
516 SPRD_EIC_DATA_MASK;
517 break;
518 case SPRD_EIC_LATCH:
519 reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
520 SPRD_EIC_DATA_MASK;
521 break;
522 case SPRD_EIC_ASYNC:
523 reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
524 SPRD_EIC_DATA_MASK;
525 break;
526 case SPRD_EIC_SYNC:
527 reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
528 SPRD_EIC_DATA_MASK;
529 break;
530 default:
531 dev_err(chip->parent, "Unsupported EIC type.\n");
532 return;
533 }
534
535 for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) {
536 u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
537
538 girq = irq_find_mapping(chip->irq.domain, offset);
539
540 generic_handle_irq(girq);
541 sprd_eic_toggle_trigger(chip, girq, offset);
542 }
543 }
544}
545
546static void sprd_eic_irq_handler(struct irq_desc *desc)
547{
548 struct irq_chip *ic = irq_desc_get_chip(desc);
549 struct gpio_chip *chip;
550 enum sprd_eic_type type;
551
552 chained_irq_enter(ic, desc);
553
554 /*
555 * Since the digital-chip EIC 4 sub-modules (debounce, latch, async
556 * and sync) share one same interrupt line, we should iterate each
557 * EIC module to check if there are EIC interrupts were triggered.
558 */
559 for (type = SPRD_EIC_DEBOUNCE; type < SPRD_EIC_MAX; type++) {
560 chip = gpiochip_find(&type, sprd_eic_match_chip_by_type);
561 if (!chip)
562 continue;
563
564 sprd_eic_handle_one_type(chip);
565 }
566
567 chained_irq_exit(ic, desc);
568}
569
570static const struct irq_chip sprd_eic_irq = {
571 .name = "sprd-eic",
572 .irq_ack = sprd_eic_irq_ack,
573 .irq_mask = sprd_eic_irq_mask,
574 .irq_unmask = sprd_eic_irq_unmask,
575 .irq_set_type = sprd_eic_irq_set_type,
576 .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
577 GPIOCHIP_IRQ_RESOURCE_HELPERS,
578};
579static int sprd_eic_probe(struct platform_device *pdev)
580{
581 const struct sprd_eic_variant_data *pdata;
582 struct gpio_irq_chip *irq;
583 struct sprd_eic *sprd_eic;
584 struct resource *res;
585 int ret, i;
586
587 pdata = of_device_get_match_data(&pdev->dev);
588 if (!pdata) {
589 dev_err(&pdev->dev, "No matching driver data found.\n");
590 return -EINVAL;
591 }
592
593 sprd_eic = devm_kzalloc(&pdev->dev, sizeof(*sprd_eic), GFP_KERNEL);
594 if (!sprd_eic)
595 return -ENOMEM;
596
597 spin_lock_init(&sprd_eic->lock);
598 sprd_eic->type = pdata->type;
599
600 sprd_eic->irq = platform_get_irq(pdev, 0);
601 if (sprd_eic->irq < 0)
602 return sprd_eic->irq;
603
604 for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
605 /*
606 * We can have maximum 3 banks EICs, and each EIC has
607 * its own base address. But some platform maybe only
608 * have one bank EIC, thus base[1] and base[2] can be
609 * optional.
610 */
611 res = platform_get_resource(pdev, IORESOURCE_MEM, i);
612 if (!res)
613 break;
614
615 sprd_eic->base[i] = devm_ioremap_resource(&pdev->dev, res);
616 if (IS_ERR(sprd_eic->base[i]))
617 return PTR_ERR(sprd_eic->base[i]);
618 }
619
620 sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
621 sprd_eic->chip.ngpio = pdata->num_eics;
622 sprd_eic->chip.base = -1;
623 sprd_eic->chip.parent = &pdev->dev;
624 sprd_eic->chip.direction_input = sprd_eic_direction_input;
625 switch (sprd_eic->type) {
626 case SPRD_EIC_DEBOUNCE:
627 sprd_eic->chip.request = sprd_eic_request;
628 sprd_eic->chip.free = sprd_eic_free;
629 sprd_eic->chip.set_config = sprd_eic_set_config;
630 sprd_eic->chip.set = sprd_eic_set;
631 fallthrough;
632 case SPRD_EIC_ASYNC:
633 case SPRD_EIC_SYNC:
634 sprd_eic->chip.get = sprd_eic_get;
635 break;
636 case SPRD_EIC_LATCH:
637 default:
638 break;
639 }
640
641 irq = &sprd_eic->chip.irq;
642 gpio_irq_chip_set_chip(irq, &sprd_eic_irq);
643 irq->handler = handle_bad_irq;
644 irq->default_type = IRQ_TYPE_NONE;
645 irq->parent_handler = sprd_eic_irq_handler;
646 irq->parent_handler_data = sprd_eic;
647 irq->num_parents = 1;
648 irq->parents = &sprd_eic->irq;
649
650 ret = devm_gpiochip_add_data(&pdev->dev, &sprd_eic->chip, sprd_eic);
651 if (ret < 0) {
652 dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
653 return ret;
654 }
655
656 platform_set_drvdata(pdev, sprd_eic);
657 return 0;
658}
659
660static const struct of_device_id sprd_eic_of_match[] = {
661 {
662 .compatible = "sprd,sc9860-eic-debounce",
663 .data = &sc9860_eic_dbnc_data,
664 },
665 {
666 .compatible = "sprd,sc9860-eic-latch",
667 .data = &sc9860_eic_latch_data,
668 },
669 {
670 .compatible = "sprd,sc9860-eic-async",
671 .data = &sc9860_eic_async_data,
672 },
673 {
674 .compatible = "sprd,sc9860-eic-sync",
675 .data = &sc9860_eic_sync_data,
676 },
677 {
678 /* end of list */
679 }
680};
681MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
682
683static struct platform_driver sprd_eic_driver = {
684 .probe = sprd_eic_probe,
685 .driver = {
686 .name = "sprd-eic",
687 .of_match_table = sprd_eic_of_match,
688 },
689};
690
691module_platform_driver(sprd_eic_driver);
692
693MODULE_DESCRIPTION("Spreadtrum EIC driver");
694MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2018 Spreadtrum Communications Inc.
4 * Copyright (C) 2018 Linaro Ltd.
5 */
6
7#include <linux/bitops.h>
8#include <linux/gpio/driver.h>
9#include <linux/interrupt.h>
10#include <linux/kernel.h>
11#include <linux/module.h>
12#include <linux/notifier.h>
13#include <linux/of.h>
14#include <linux/platform_device.h>
15#include <linux/spinlock.h>
16
17/* EIC registers definition */
18#define SPRD_EIC_DBNC_DATA 0x0
19#define SPRD_EIC_DBNC_DMSK 0x4
20#define SPRD_EIC_DBNC_IEV 0x14
21#define SPRD_EIC_DBNC_IE 0x18
22#define SPRD_EIC_DBNC_RIS 0x1c
23#define SPRD_EIC_DBNC_MIS 0x20
24#define SPRD_EIC_DBNC_IC 0x24
25#define SPRD_EIC_DBNC_TRIG 0x28
26#define SPRD_EIC_DBNC_CTRL0 0x40
27
28#define SPRD_EIC_LATCH_INTEN 0x0
29#define SPRD_EIC_LATCH_INTRAW 0x4
30#define SPRD_EIC_LATCH_INTMSK 0x8
31#define SPRD_EIC_LATCH_INTCLR 0xc
32#define SPRD_EIC_LATCH_INTPOL 0x10
33#define SPRD_EIC_LATCH_INTMODE 0x14
34
35#define SPRD_EIC_ASYNC_INTIE 0x0
36#define SPRD_EIC_ASYNC_INTRAW 0x4
37#define SPRD_EIC_ASYNC_INTMSK 0x8
38#define SPRD_EIC_ASYNC_INTCLR 0xc
39#define SPRD_EIC_ASYNC_INTMODE 0x10
40#define SPRD_EIC_ASYNC_INTBOTH 0x14
41#define SPRD_EIC_ASYNC_INTPOL 0x18
42#define SPRD_EIC_ASYNC_DATA 0x1c
43
44#define SPRD_EIC_SYNC_INTIE 0x0
45#define SPRD_EIC_SYNC_INTRAW 0x4
46#define SPRD_EIC_SYNC_INTMSK 0x8
47#define SPRD_EIC_SYNC_INTCLR 0xc
48#define SPRD_EIC_SYNC_INTMODE 0x10
49#define SPRD_EIC_SYNC_INTBOTH 0x14
50#define SPRD_EIC_SYNC_INTPOL 0x18
51#define SPRD_EIC_SYNC_DATA 0x1c
52
53/*
54 * The digital-chip EIC controller can support maximum 3 banks, and each bank
55 * contains 8 EICs.
56 */
57#define SPRD_EIC_MAX_BANK 3
58#define SPRD_EIC_PER_BANK_NR 8
59#define SPRD_EIC_DATA_MASK GENMASK(7, 0)
60#define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1))
61#define SPRD_EIC_DBNC_MASK GENMASK(11, 0)
62
63/*
64 * The Spreadtrum EIC (external interrupt controller) can be used only in
65 * input mode to generate interrupts if detecting input signals.
66 *
67 * The Spreadtrum digital-chip EIC controller contains 4 sub-modules:
68 * debounce EIC, latch EIC, async EIC and sync EIC,
69 *
70 * The debounce EIC is used to capture the input signals' stable status
71 * (millisecond resolution) and a single-trigger mechanism is introduced
72 * into this sub-module to enhance the input event detection reliability.
73 * The debounce range is from 1ms to 4s with a step size of 1ms.
74 *
75 * The latch EIC is used to latch some special power down signals and
76 * generate interrupts, since the latch EIC does not depend on the APB clock
77 * to capture signals.
78 *
79 * The async EIC uses a 32k clock to capture the short signals (microsecond
80 * resolution) to generate interrupts by level or edge trigger.
81 *
82 * The EIC-sync is similar with GPIO's input function, which is a synchronized
83 * signal input register.
84 */
85enum sprd_eic_type {
86 SPRD_EIC_DEBOUNCE,
87 SPRD_EIC_LATCH,
88 SPRD_EIC_ASYNC,
89 SPRD_EIC_SYNC,
90 SPRD_EIC_MAX,
91};
92
93struct sprd_eic {
94 struct gpio_chip chip;
95 struct notifier_block irq_nb;
96 void __iomem *base[SPRD_EIC_MAX_BANK];
97 enum sprd_eic_type type;
98 spinlock_t lock;
99 int irq;
100};
101
102static ATOMIC_NOTIFIER_HEAD(sprd_eic_irq_notifier);
103
104static struct sprd_eic *to_sprd_eic(struct notifier_block *nb)
105{
106 return container_of(nb, struct sprd_eic, irq_nb);
107}
108
109struct sprd_eic_variant_data {
110 enum sprd_eic_type type;
111 u32 num_eics;
112};
113
114static const char *sprd_eic_label_name[SPRD_EIC_MAX] = {
115 "eic-debounce", "eic-latch", "eic-async",
116 "eic-sync",
117};
118
119static const struct sprd_eic_variant_data sc9860_eic_dbnc_data = {
120 .type = SPRD_EIC_DEBOUNCE,
121 .num_eics = 8,
122};
123
124static const struct sprd_eic_variant_data sc9860_eic_latch_data = {
125 .type = SPRD_EIC_LATCH,
126 .num_eics = 8,
127};
128
129static const struct sprd_eic_variant_data sc9860_eic_async_data = {
130 .type = SPRD_EIC_ASYNC,
131 .num_eics = 8,
132};
133
134static const struct sprd_eic_variant_data sc9860_eic_sync_data = {
135 .type = SPRD_EIC_SYNC,
136 .num_eics = 8,
137};
138
139static inline void __iomem *sprd_eic_offset_base(struct sprd_eic *sprd_eic,
140 unsigned int bank)
141{
142 if (bank >= SPRD_EIC_MAX_BANK)
143 return NULL;
144
145 return sprd_eic->base[bank];
146}
147
148static void sprd_eic_update(struct gpio_chip *chip, unsigned int offset,
149 u16 reg, unsigned int val)
150{
151 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
152 void __iomem *base =
153 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
154 unsigned long flags;
155 u32 tmp;
156
157 spin_lock_irqsave(&sprd_eic->lock, flags);
158 tmp = readl_relaxed(base + reg);
159
160 if (val)
161 tmp |= BIT(SPRD_EIC_BIT(offset));
162 else
163 tmp &= ~BIT(SPRD_EIC_BIT(offset));
164
165 writel_relaxed(tmp, base + reg);
166 spin_unlock_irqrestore(&sprd_eic->lock, flags);
167}
168
169static int sprd_eic_read(struct gpio_chip *chip, unsigned int offset, u16 reg)
170{
171 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
172 void __iomem *base =
173 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
174
175 return !!(readl_relaxed(base + reg) & BIT(SPRD_EIC_BIT(offset)));
176}
177
178static int sprd_eic_request(struct gpio_chip *chip, unsigned int offset)
179{
180 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 1);
181 return 0;
182}
183
184static void sprd_eic_free(struct gpio_chip *chip, unsigned int offset)
185{
186 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_DMSK, 0);
187}
188
189static int sprd_eic_get(struct gpio_chip *chip, unsigned int offset)
190{
191 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
192
193 switch (sprd_eic->type) {
194 case SPRD_EIC_DEBOUNCE:
195 return sprd_eic_read(chip, offset, SPRD_EIC_DBNC_DATA);
196 case SPRD_EIC_ASYNC:
197 return sprd_eic_read(chip, offset, SPRD_EIC_ASYNC_DATA);
198 case SPRD_EIC_SYNC:
199 return sprd_eic_read(chip, offset, SPRD_EIC_SYNC_DATA);
200 default:
201 return -ENOTSUPP;
202 }
203}
204
205static int sprd_eic_direction_input(struct gpio_chip *chip, unsigned int offset)
206{
207 /* EICs are always input, nothing need to do here. */
208 return 0;
209}
210
211static void sprd_eic_set(struct gpio_chip *chip, unsigned int offset, int value)
212{
213 /* EICs are always input, nothing need to do here. */
214}
215
216static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
217 unsigned int debounce)
218{
219 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
220 void __iomem *base =
221 sprd_eic_offset_base(sprd_eic, offset / SPRD_EIC_PER_BANK_NR);
222 u32 reg = SPRD_EIC_DBNC_CTRL0 + SPRD_EIC_BIT(offset) * 0x4;
223 u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
224
225 value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
226 writel_relaxed(value, base + reg);
227
228 return 0;
229}
230
231static int sprd_eic_set_config(struct gpio_chip *chip, unsigned int offset,
232 unsigned long config)
233{
234 unsigned long param = pinconf_to_config_param(config);
235 u32 arg = pinconf_to_config_argument(config);
236
237 if (param == PIN_CONFIG_INPUT_DEBOUNCE)
238 return sprd_eic_set_debounce(chip, offset, arg);
239
240 return -ENOTSUPP;
241}
242
243static void sprd_eic_irq_mask(struct irq_data *data)
244{
245 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
246 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
247 u32 offset = irqd_to_hwirq(data);
248
249 switch (sprd_eic->type) {
250 case SPRD_EIC_DEBOUNCE:
251 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 0);
252 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 0);
253 break;
254 case SPRD_EIC_LATCH:
255 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 0);
256 break;
257 case SPRD_EIC_ASYNC:
258 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 0);
259 break;
260 case SPRD_EIC_SYNC:
261 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 0);
262 break;
263 default:
264 dev_err(chip->parent, "Unsupported EIC type.\n");
265 }
266
267 gpiochip_disable_irq(chip, offset);
268}
269
270static void sprd_eic_irq_unmask(struct irq_data *data)
271{
272 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
273 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
274 u32 offset = irqd_to_hwirq(data);
275
276 gpiochip_enable_irq(chip, offset);
277
278 switch (sprd_eic->type) {
279 case SPRD_EIC_DEBOUNCE:
280 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IE, 1);
281 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_TRIG, 1);
282 break;
283 case SPRD_EIC_LATCH:
284 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTEN, 1);
285 break;
286 case SPRD_EIC_ASYNC:
287 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTIE, 1);
288 break;
289 case SPRD_EIC_SYNC:
290 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTIE, 1);
291 break;
292 default:
293 dev_err(chip->parent, "Unsupported EIC type.\n");
294 }
295}
296
297static void sprd_eic_irq_ack(struct irq_data *data)
298{
299 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
300 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
301 u32 offset = irqd_to_hwirq(data);
302
303 switch (sprd_eic->type) {
304 case SPRD_EIC_DEBOUNCE:
305 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
306 break;
307 case SPRD_EIC_LATCH:
308 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
309 break;
310 case SPRD_EIC_ASYNC:
311 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
312 break;
313 case SPRD_EIC_SYNC:
314 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
315 break;
316 default:
317 dev_err(chip->parent, "Unsupported EIC type.\n");
318 }
319}
320
321static int sprd_eic_irq_set_type(struct irq_data *data, unsigned int flow_type)
322{
323 struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
324 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
325 u32 offset = irqd_to_hwirq(data);
326 int state;
327
328 switch (sprd_eic->type) {
329 case SPRD_EIC_DEBOUNCE:
330 switch (flow_type) {
331 case IRQ_TYPE_LEVEL_HIGH:
332 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
333 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
334 break;
335 case IRQ_TYPE_LEVEL_LOW:
336 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
337 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IC, 1);
338 break;
339 case IRQ_TYPE_EDGE_RISING:
340 case IRQ_TYPE_EDGE_FALLING:
341 case IRQ_TYPE_EDGE_BOTH:
342 state = sprd_eic_get(chip, offset);
343 if (state) {
344 sprd_eic_update(chip, offset,
345 SPRD_EIC_DBNC_IEV, 0);
346 sprd_eic_update(chip, offset,
347 SPRD_EIC_DBNC_IC, 1);
348 } else {
349 sprd_eic_update(chip, offset,
350 SPRD_EIC_DBNC_IEV, 1);
351 sprd_eic_update(chip, offset,
352 SPRD_EIC_DBNC_IC, 1);
353 }
354 break;
355 default:
356 return -ENOTSUPP;
357 }
358
359 irq_set_handler_locked(data, handle_level_irq);
360 break;
361 case SPRD_EIC_LATCH:
362 switch (flow_type) {
363 case IRQ_TYPE_LEVEL_HIGH:
364 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
365 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
366 break;
367 case IRQ_TYPE_LEVEL_LOW:
368 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
369 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTCLR, 1);
370 break;
371 case IRQ_TYPE_EDGE_RISING:
372 case IRQ_TYPE_EDGE_FALLING:
373 case IRQ_TYPE_EDGE_BOTH:
374 state = sprd_eic_get(chip, offset);
375 if (state) {
376 sprd_eic_update(chip, offset,
377 SPRD_EIC_LATCH_INTPOL, 0);
378 sprd_eic_update(chip, offset,
379 SPRD_EIC_LATCH_INTCLR, 1);
380 } else {
381 sprd_eic_update(chip, offset,
382 SPRD_EIC_LATCH_INTPOL, 1);
383 sprd_eic_update(chip, offset,
384 SPRD_EIC_LATCH_INTCLR, 1);
385 }
386 break;
387 default:
388 return -ENOTSUPP;
389 }
390
391 irq_set_handler_locked(data, handle_level_irq);
392 break;
393 case SPRD_EIC_ASYNC:
394 switch (flow_type) {
395 case IRQ_TYPE_EDGE_RISING:
396 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
397 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
398 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
399 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
400 irq_set_handler_locked(data, handle_edge_irq);
401 break;
402 case IRQ_TYPE_EDGE_FALLING:
403 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
404 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
405 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
406 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
407 irq_set_handler_locked(data, handle_edge_irq);
408 break;
409 case IRQ_TYPE_EDGE_BOTH:
410 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 0);
411 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 1);
412 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
413 irq_set_handler_locked(data, handle_edge_irq);
414 break;
415 case IRQ_TYPE_LEVEL_HIGH:
416 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
417 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
418 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 1);
419 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
420 irq_set_handler_locked(data, handle_level_irq);
421 break;
422 case IRQ_TYPE_LEVEL_LOW:
423 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTBOTH, 0);
424 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTMODE, 1);
425 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTPOL, 0);
426 sprd_eic_update(chip, offset, SPRD_EIC_ASYNC_INTCLR, 1);
427 irq_set_handler_locked(data, handle_level_irq);
428 break;
429 default:
430 return -ENOTSUPP;
431 }
432 break;
433 case SPRD_EIC_SYNC:
434 switch (flow_type) {
435 case IRQ_TYPE_EDGE_RISING:
436 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
437 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
438 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
439 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
440 irq_set_handler_locked(data, handle_edge_irq);
441 break;
442 case IRQ_TYPE_EDGE_FALLING:
443 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
444 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
445 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
446 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
447 irq_set_handler_locked(data, handle_edge_irq);
448 break;
449 case IRQ_TYPE_EDGE_BOTH:
450 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 0);
451 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 1);
452 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
453 irq_set_handler_locked(data, handle_edge_irq);
454 break;
455 case IRQ_TYPE_LEVEL_HIGH:
456 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
457 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
458 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 1);
459 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
460 irq_set_handler_locked(data, handle_level_irq);
461 break;
462 case IRQ_TYPE_LEVEL_LOW:
463 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTBOTH, 0);
464 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTMODE, 1);
465 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTPOL, 0);
466 sprd_eic_update(chip, offset, SPRD_EIC_SYNC_INTCLR, 1);
467 irq_set_handler_locked(data, handle_level_irq);
468 break;
469 default:
470 return -ENOTSUPP;
471 }
472 break;
473 default:
474 dev_err(chip->parent, "Unsupported EIC type.\n");
475 return -ENOTSUPP;
476 }
477
478 return 0;
479}
480
481static void sprd_eic_toggle_trigger(struct gpio_chip *chip, unsigned int irq,
482 unsigned int offset)
483{
484 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
485 struct irq_data *data = irq_get_irq_data(irq);
486 u32 trigger = irqd_get_trigger_type(data);
487 int state, post_state;
488
489 /*
490 * The debounce EIC and latch EIC can only support level trigger, so we
491 * can toggle the level trigger to emulate the edge trigger.
492 */
493 if ((sprd_eic->type != SPRD_EIC_DEBOUNCE &&
494 sprd_eic->type != SPRD_EIC_LATCH) ||
495 !(trigger & IRQ_TYPE_EDGE_BOTH))
496 return;
497
498 sprd_eic_irq_mask(data);
499 state = sprd_eic_get(chip, offset);
500
501retry:
502 switch (sprd_eic->type) {
503 case SPRD_EIC_DEBOUNCE:
504 if (state)
505 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 0);
506 else
507 sprd_eic_update(chip, offset, SPRD_EIC_DBNC_IEV, 1);
508 break;
509 case SPRD_EIC_LATCH:
510 if (state)
511 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 0);
512 else
513 sprd_eic_update(chip, offset, SPRD_EIC_LATCH_INTPOL, 1);
514 break;
515 default:
516 sprd_eic_irq_unmask(data);
517 return;
518 }
519
520 post_state = sprd_eic_get(chip, offset);
521 if (state != post_state) {
522 dev_warn(chip->parent, "EIC level was changed.\n");
523 state = post_state;
524 goto retry;
525 }
526
527 sprd_eic_irq_unmask(data);
528}
529
530static void sprd_eic_handle_one_type(struct gpio_chip *chip)
531{
532 struct sprd_eic *sprd_eic = gpiochip_get_data(chip);
533 u32 bank, n, girq;
534
535 for (bank = 0; bank * SPRD_EIC_PER_BANK_NR < chip->ngpio; bank++) {
536 void __iomem *base = sprd_eic_offset_base(sprd_eic, bank);
537 unsigned long reg;
538
539 switch (sprd_eic->type) {
540 case SPRD_EIC_DEBOUNCE:
541 reg = readl_relaxed(base + SPRD_EIC_DBNC_MIS) &
542 SPRD_EIC_DATA_MASK;
543 break;
544 case SPRD_EIC_LATCH:
545 reg = readl_relaxed(base + SPRD_EIC_LATCH_INTMSK) &
546 SPRD_EIC_DATA_MASK;
547 break;
548 case SPRD_EIC_ASYNC:
549 reg = readl_relaxed(base + SPRD_EIC_ASYNC_INTMSK) &
550 SPRD_EIC_DATA_MASK;
551 break;
552 case SPRD_EIC_SYNC:
553 reg = readl_relaxed(base + SPRD_EIC_SYNC_INTMSK) &
554 SPRD_EIC_DATA_MASK;
555 break;
556 default:
557 dev_err(chip->parent, "Unsupported EIC type.\n");
558 return;
559 }
560
561 for_each_set_bit(n, ®, SPRD_EIC_PER_BANK_NR) {
562 u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
563
564 girq = irq_find_mapping(chip->irq.domain, offset);
565
566 generic_handle_irq(girq);
567 sprd_eic_toggle_trigger(chip, girq, offset);
568 }
569 }
570}
571
572static void sprd_eic_irq_handler(struct irq_desc *desc)
573{
574 struct irq_chip *ic = irq_desc_get_chip(desc);
575
576 chained_irq_enter(ic, desc);
577
578 /*
579 * Since the digital-chip EIC 4 sub-modules (debounce, latch, async
580 * and sync) share one same interrupt line, we should notify all of
581 * them to let them check if there are EIC interrupts were triggered.
582 */
583 atomic_notifier_call_chain(&sprd_eic_irq_notifier, 0, NULL);
584
585 chained_irq_exit(ic, desc);
586}
587
588static int sprd_eic_irq_notify(struct notifier_block *nb, unsigned long action,
589 void *data)
590{
591 struct sprd_eic *sprd_eic = to_sprd_eic(nb);
592
593 sprd_eic_handle_one_type(&sprd_eic->chip);
594
595 return NOTIFY_OK;
596}
597
598static const struct irq_chip sprd_eic_irq = {
599 .name = "sprd-eic",
600 .irq_ack = sprd_eic_irq_ack,
601 .irq_mask = sprd_eic_irq_mask,
602 .irq_unmask = sprd_eic_irq_unmask,
603 .irq_set_type = sprd_eic_irq_set_type,
604 .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
605 GPIOCHIP_IRQ_RESOURCE_HELPERS,
606};
607
608static void sprd_eic_unregister_notifier(void *data)
609{
610 struct notifier_block *nb = data;
611
612 atomic_notifier_chain_unregister(&sprd_eic_irq_notifier, nb);
613}
614
615static int sprd_eic_probe(struct platform_device *pdev)
616{
617 const struct sprd_eic_variant_data *pdata;
618 struct device *dev = &pdev->dev;
619 struct gpio_irq_chip *irq;
620 struct sprd_eic *sprd_eic;
621 struct resource *res;
622 int ret, i;
623
624 pdata = of_device_get_match_data(dev);
625 if (!pdata) {
626 dev_err(dev, "No matching driver data found.\n");
627 return -EINVAL;
628 }
629
630 sprd_eic = devm_kzalloc(dev, sizeof(*sprd_eic), GFP_KERNEL);
631 if (!sprd_eic)
632 return -ENOMEM;
633
634 spin_lock_init(&sprd_eic->lock);
635 sprd_eic->type = pdata->type;
636
637 sprd_eic->irq = platform_get_irq(pdev, 0);
638 if (sprd_eic->irq < 0)
639 return sprd_eic->irq;
640
641 for (i = 0; i < SPRD_EIC_MAX_BANK; i++) {
642 /*
643 * We can have maximum 3 banks EICs, and each EIC has
644 * its own base address. But some platform maybe only
645 * have one bank EIC, thus base[1] and base[2] can be
646 * optional.
647 */
648 res = platform_get_resource(pdev, IORESOURCE_MEM, i);
649 if (!res)
650 break;
651
652 sprd_eic->base[i] = devm_ioremap_resource(dev, res);
653 if (IS_ERR(sprd_eic->base[i]))
654 return PTR_ERR(sprd_eic->base[i]);
655 }
656
657 sprd_eic->chip.label = sprd_eic_label_name[sprd_eic->type];
658 sprd_eic->chip.ngpio = pdata->num_eics;
659 sprd_eic->chip.base = -1;
660 sprd_eic->chip.parent = dev;
661 sprd_eic->chip.direction_input = sprd_eic_direction_input;
662 switch (sprd_eic->type) {
663 case SPRD_EIC_DEBOUNCE:
664 sprd_eic->chip.request = sprd_eic_request;
665 sprd_eic->chip.free = sprd_eic_free;
666 sprd_eic->chip.set_config = sprd_eic_set_config;
667 sprd_eic->chip.set = sprd_eic_set;
668 fallthrough;
669 case SPRD_EIC_ASYNC:
670 case SPRD_EIC_SYNC:
671 sprd_eic->chip.get = sprd_eic_get;
672 break;
673 case SPRD_EIC_LATCH:
674 default:
675 break;
676 }
677
678 irq = &sprd_eic->chip.irq;
679 gpio_irq_chip_set_chip(irq, &sprd_eic_irq);
680 irq->handler = handle_bad_irq;
681 irq->default_type = IRQ_TYPE_NONE;
682 irq->parent_handler = sprd_eic_irq_handler;
683 irq->parent_handler_data = sprd_eic;
684 irq->num_parents = 1;
685 irq->parents = &sprd_eic->irq;
686
687 ret = devm_gpiochip_add_data(dev, &sprd_eic->chip, sprd_eic);
688 if (ret < 0) {
689 dev_err(dev, "Could not register gpiochip %d.\n", ret);
690 return ret;
691 }
692
693 sprd_eic->irq_nb.notifier_call = sprd_eic_irq_notify;
694 ret = atomic_notifier_chain_register(&sprd_eic_irq_notifier,
695 &sprd_eic->irq_nb);
696 if (ret)
697 return dev_err_probe(dev, ret,
698 "Failed to register with the interrupt notifier");
699
700 return devm_add_action_or_reset(dev, sprd_eic_unregister_notifier,
701 &sprd_eic->irq_nb);
702}
703
704static const struct of_device_id sprd_eic_of_match[] = {
705 {
706 .compatible = "sprd,sc9860-eic-debounce",
707 .data = &sc9860_eic_dbnc_data,
708 },
709 {
710 .compatible = "sprd,sc9860-eic-latch",
711 .data = &sc9860_eic_latch_data,
712 },
713 {
714 .compatible = "sprd,sc9860-eic-async",
715 .data = &sc9860_eic_async_data,
716 },
717 {
718 .compatible = "sprd,sc9860-eic-sync",
719 .data = &sc9860_eic_sync_data,
720 },
721 {
722 /* end of list */
723 }
724};
725MODULE_DEVICE_TABLE(of, sprd_eic_of_match);
726
727static struct platform_driver sprd_eic_driver = {
728 .probe = sprd_eic_probe,
729 .driver = {
730 .name = "sprd-eic",
731 .of_match_table = sprd_eic_of_match,
732 },
733};
734
735module_platform_driver(sprd_eic_driver);
736
737MODULE_DESCRIPTION("Spreadtrum EIC driver");
738MODULE_LICENSE("GPL v2");