1// SPDX-License-Identifier: GPL-2.0
  2/ {
  3	mbus@f1000000 {
  4		pciec: pcie@82000000 {
  5			compatible = "marvell,kirkwood-pcie";
  6			status = "disabled";
  7			device_type = "pci";
  8
  9			#address-cells = <3>;
 10			#size-cells = <2>;
 11
 12			bus-range = <0x00 0xff>;
 13
 14			ranges =
 15			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
 16				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
 17				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
 18
 19			pcie0: pcie@1,0 {
 20				device_type = "pci";
 21				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
 22				reg = <0x0800 0 0 0 0>;
 23				#address-cells = <3>;
 24				#size-cells = <2>;
 25				#interrupt-cells = <1>;
 26				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 27					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 28				bus-range = <0x00 0xff>;
 29				interrupt-names = "intx", "error";
 30				interrupts = <9>, <44>;
 31				interrupt-map-mask = <0 0 0 7>;
 32				interrupt-map = <0 0 0 1 &pcie_intc 0>,
 33						<0 0 0 2 &pcie_intc 1>,
 34						<0 0 0 3 &pcie_intc 2>,
 35						<0 0 0 4 &pcie_intc 3>;
 36				marvell,pcie-port = <0>;
 37				marvell,pcie-lane = <0>;
 38				clocks = <&gate_clk 2>;
 39				status = "disabled";
 40
 41				pcie_intc: interrupt-controller {
 42					interrupt-controller;
 43					#interrupt-cells = <1>;
 44				};
 45			};
 46		};
 47	};
 48
 49	ocp@f1000000 {
 50		pinctrl: pin-controller@10000 {
 51			compatible = "marvell,88f6281-pinctrl";
 52
 53			pmx_sata0: pmx-sata0 {
 54				marvell,pins = "mpp5", "mpp21", "mpp23";
 55				marvell,function = "sata0";
 56			};
 57			pmx_sata1: pmx-sata1 {
 58				marvell,pins = "mpp4", "mpp20", "mpp22";
 59				marvell,function = "sata1";
 60			};
 61			pmx_sdio: pmx-sdio {
 62				marvell,pins = "mpp12", "mpp13", "mpp14",
 63					       "mpp15", "mpp16", "mpp17";
 64				marvell,function = "sdio";
 65			};
 66		};
 67
 68		rtc: rtc@10300 {
 69			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 70			reg = <0x10300 0x20>;
 71			interrupts = <53>;
 72			clocks = <&gate_clk 7>;
 73		};
 74
 75		sata: sata@80000 {
 76			compatible = "marvell,orion-sata";
 77			reg = <0x80000 0x5000>;
 78			interrupts = <21>;
 79			clocks = <&gate_clk 14>, <&gate_clk 15>;
 80			clock-names = "0", "1";
 81			phys = <&sata_phy0>, <&sata_phy1>;
 82			phy-names = "port0", "port1";
 83			status = "disabled";
 84		};
 85
 86		sdio: mvsdio@90000 {
 87			compatible = "marvell,orion-sdio";
 88			reg = <0x90000 0x200>;
 89			interrupts = <28>;
 90			clocks = <&gate_clk 4>;
 91			pinctrl-0 = <&pmx_sdio>;
 92			pinctrl-names = "default";
 93			bus-width = <4>;
 94			cap-sdio-irq;
 95			cap-sd-highspeed;
 96			cap-mmc-highspeed;
 97			status = "disabled";
 98		};
 99	};
100};