Loading...
1====================
2DMA Engine API Guide
3====================
4
5Vinod Koul <vinod dot koul at intel.com>
6
7.. note:: For DMA Engine usage in async_tx please see:
8 ``Documentation/crypto/async-tx-api.rst``
9
10
11Below is a guide to device driver writers on how to use the Slave-DMA API of the
12DMA Engine. This is applicable only for slave DMA usage only.
13
14DMA usage
15=========
16
17The slave DMA usage consists of following steps:
18
19- Allocate a DMA slave channel
20
21- Set slave and controller specific parameters
22
23- Get a descriptor for transaction
24
25- Submit the transaction
26
27- Issue pending requests and wait for callback notification
28
29The details of these operations are:
30
311. Allocate a DMA slave channel
32
33 Channel allocation is slightly different in the slave DMA context,
34 client drivers typically need a channel from a particular DMA
35 controller only and even in some cases a specific channel is desired.
36 To request a channel dma_request_chan() API is used.
37
38 Interface:
39
40 .. code-block:: c
41
42 struct dma_chan *dma_request_chan(struct device *dev, const char *name);
43
44 Which will find and return the ``name`` DMA channel associated with the 'dev'
45 device. The association is done via DT, ACPI or board file based
46 dma_slave_map matching table.
47
48 A channel allocated via this interface is exclusive to the caller,
49 until dma_release_channel() is called.
50
512. Set slave and controller specific parameters
52
53 Next step is always to pass some specific information to the DMA
54 driver. Most of the generic information which a slave DMA can use
55 is in struct dma_slave_config. This allows the clients to specify
56 DMA direction, DMA addresses, bus widths, DMA burst lengths etc
57 for the peripheral.
58
59 If some DMA controllers have more parameters to be sent then they
60 should try to embed struct dma_slave_config in their controller
61 specific structure. That gives flexibility to client to pass more
62 parameters, if required.
63
64 Interface:
65
66 .. code-block:: c
67
68 int dmaengine_slave_config(struct dma_chan *chan,
69 struct dma_slave_config *config)
70
71 Please see the dma_slave_config structure definition in dmaengine.h
72 for a detailed explanation of the struct members. Please note
73 that the 'direction' member will be going away as it duplicates the
74 direction given in the prepare call.
75
763. Get a descriptor for transaction
77
78 For slave usage the various modes of slave transfers supported by the
79 DMA-engine are:
80
81 - slave_sg: DMA a list of scatter gather buffers from/to a peripheral
82
83 - dma_cyclic: Perform a cyclic DMA operation from/to a peripheral till the
84 operation is explicitly stopped.
85
86 - interleaved_dma: This is common to Slave as well as M2M clients. For slave
87 address of devices' fifo could be already known to the driver.
88 Various types of operations could be expressed by setting
89 appropriate values to the 'dma_interleaved_template' members. Cyclic
90 interleaved DMA transfers are also possible if supported by the channel by
91 setting the DMA_PREP_REPEAT transfer flag.
92
93 A non-NULL return of this transfer API represents a "descriptor" for
94 the given transaction.
95
96 Interface:
97
98 .. code-block:: c
99
100 struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
101 struct dma_chan *chan, struct scatterlist *sgl,
102 unsigned int sg_len, enum dma_data_direction direction,
103 unsigned long flags);
104
105 struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
106 struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
107 size_t period_len, enum dma_data_direction direction);
108
109 struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
110 struct dma_chan *chan, struct dma_interleaved_template *xt,
111 unsigned long flags);
112
113 The peripheral driver is expected to have mapped the scatterlist for
114 the DMA operation prior to calling dmaengine_prep_slave_sg(), and must
115 keep the scatterlist mapped until the DMA operation has completed.
116 The scatterlist must be mapped using the DMA struct device.
117 If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
118 called using the DMA struct device, too.
119 So, normal setup should look like this:
120
121 .. code-block:: c
122
123 struct device *dma_dev = dmaengine_get_dma_device(chan);
124
125 nr_sg = dma_map_sg(dma_dev, sgl, sg_len);
126 if (nr_sg == 0)
127 /* error */
128
129 desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags);
130
131 Once a descriptor has been obtained, the callback information can be
132 added and the descriptor must then be submitted. Some DMA engine
133 drivers may hold a spinlock between a successful preparation and
134 submission so it is important that these two operations are closely
135 paired.
136
137 .. note::
138
139 Although the async_tx API specifies that completion callback
140 routines cannot submit any new operations, this is not the
141 case for slave/cyclic DMA.
142
143 For slave DMA, the subsequent transaction may not be available
144 for submission prior to callback function being invoked, so
145 slave DMA callbacks are permitted to prepare and submit a new
146 transaction.
147
148 For cyclic DMA, a callback function may wish to terminate the
149 DMA via dmaengine_terminate_async().
150
151 Therefore, it is important that DMA engine drivers drop any
152 locks before calling the callback function which may cause a
153 deadlock.
154
155 Note that callbacks will always be invoked from the DMA
156 engines tasklet, never from interrupt context.
157
158 **Optional: per descriptor metadata**
159
160 DMAengine provides two ways for metadata support.
161
162 DESC_METADATA_CLIENT
163
164 The metadata buffer is allocated/provided by the client driver and it is
165 attached to the descriptor.
166
167 .. code-block:: c
168
169 int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc,
170 void *data, size_t len);
171
172 DESC_METADATA_ENGINE
173
174 The metadata buffer is allocated/managed by the DMA driver. The client
175 driver can ask for the pointer, maximum size and the currently used size of
176 the metadata and can directly update or read it.
177
178 Becasue the DMA driver manages the memory area containing the metadata,
179 clients must make sure that they do not try to access or get the pointer
180 after their transfer completion callback has run for the descriptor.
181 If no completion callback has been defined for the transfer, then the
182 metadata must not be accessed after issue_pending.
183 In other words: if the aim is to read back metadata after the transfer is
184 completed, then the client must use completion callback.
185
186 .. code-block:: c
187
188 void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc,
189 size_t *payload_len, size_t *max_len);
190
191 int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc,
192 size_t payload_len);
193
194 Client drivers can query if a given mode is supported with:
195
196 .. code-block:: c
197
198 bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
199 enum dma_desc_metadata_mode mode);
200
201 Depending on the used mode client drivers must follow different flow.
202
203 DESC_METADATA_CLIENT
204
205 - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
206
207 1. prepare the descriptor (dmaengine_prep_*)
208 construct the metadata in the client's buffer
209 2. use dmaengine_desc_attach_metadata() to attach the buffer to the
210 descriptor
211 3. submit the transfer
212
213 - DMA_DEV_TO_MEM:
214
215 1. prepare the descriptor (dmaengine_prep_*)
216 2. use dmaengine_desc_attach_metadata() to attach the buffer to the
217 descriptor
218 3. submit the transfer
219 4. when the transfer is completed, the metadata should be available in the
220 attached buffer
221
222 DESC_METADATA_ENGINE
223
224 - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
225
226 1. prepare the descriptor (dmaengine_prep_*)
227 2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the
228 engine's metadata area
229 3. update the metadata at the pointer
230 4. use dmaengine_desc_set_metadata_len() to tell the DMA engine the
231 amount of data the client has placed into the metadata buffer
232 5. submit the transfer
233
234 - DMA_DEV_TO_MEM:
235
236 1. prepare the descriptor (dmaengine_prep_*)
237 2. submit the transfer
238 3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get
239 the pointer to the engine's metadata area
240 4. read out the metadata from the pointer
241
242 .. note::
243
244 When DESC_METADATA_ENGINE mode is used the metadata area for the descriptor
245 is no longer valid after the transfer has been completed (valid up to the
246 point when the completion callback returns if used).
247
248 Mixed use of DESC_METADATA_CLIENT / DESC_METADATA_ENGINE is not allowed,
249 client drivers must use either of the modes per descriptor.
250
2514. Submit the transaction
252
253 Once the descriptor has been prepared and the callback information
254 added, it must be placed on the DMA engine drivers pending queue.
255
256 Interface:
257
258 .. code-block:: c
259
260 dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
261
262 This returns a cookie can be used to check the progress of DMA engine
263 activity via other DMA engine calls not covered in this document.
264
265 dmaengine_submit() will not start the DMA operation, it merely adds
266 it to the pending queue. For this, see step 5, dma_async_issue_pending.
267
268 .. note::
269
270 After calling ``dmaengine_submit()`` the submitted transfer descriptor
271 (``struct dma_async_tx_descriptor``) belongs to the DMA engine.
272 Consequently, the client must consider invalid the pointer to that
273 descriptor.
274
2755. Issue pending DMA requests and wait for callback notification
276
277 The transactions in the pending queue can be activated by calling the
278 issue_pending API. If channel is idle then the first transaction in
279 queue is started and subsequent ones queued up.
280
281 On completion of each DMA operation, the next in queue is started and
282 a tasklet triggered. The tasklet will then call the client driver
283 completion callback routine for notification, if set.
284
285 Interface:
286
287 .. code-block:: c
288
289 void dma_async_issue_pending(struct dma_chan *chan);
290
291Further APIs
292------------
293
2941. Terminate APIs
295
296 .. code-block:: c
297
298 int dmaengine_terminate_sync(struct dma_chan *chan)
299 int dmaengine_terminate_async(struct dma_chan *chan)
300 int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
301
302 This causes all activity for the DMA channel to be stopped, and may
303 discard data in the DMA FIFO which hasn't been fully transferred.
304 No callback functions will be called for any incomplete transfers.
305
306 Two variants of this function are available.
307
308 dmaengine_terminate_async() might not wait until the DMA has been fully
309 stopped or until any running complete callbacks have finished. But it is
310 possible to call dmaengine_terminate_async() from atomic context or from
311 within a complete callback. dmaengine_synchronize() must be called before it
312 is safe to free the memory accessed by the DMA transfer or free resources
313 accessed from within the complete callback.
314
315 dmaengine_terminate_sync() will wait for the transfer and any running
316 complete callbacks to finish before it returns. But the function must not be
317 called from atomic context or from within a complete callback.
318
319 dmaengine_terminate_all() is deprecated and should not be used in new code.
320
3212. Pause API
322
323 .. code-block:: c
324
325 int dmaengine_pause(struct dma_chan *chan)
326
327 This pauses activity on the DMA channel without data loss.
328
3293. Resume API
330
331 .. code-block:: c
332
333 int dmaengine_resume(struct dma_chan *chan)
334
335 Resume a previously paused DMA channel. It is invalid to resume a
336 channel which is not currently paused.
337
3384. Check Txn complete
339
340 .. code-block:: c
341
342 enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
343 dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
344
345 This can be used to check the status of the channel. Please see
346 the documentation in include/linux/dmaengine.h for a more complete
347 description of this API.
348
349 This can be used in conjunction with dma_async_is_complete() and
350 the cookie returned from dmaengine_submit() to check for
351 completion of a specific DMA transaction.
352
353 .. note::
354
355 Not all DMA engine drivers can return reliable information for
356 a running DMA channel. It is recommended that DMA engine users
357 pause or stop (via dmaengine_terminate_all()) the channel before
358 using this API.
359
3605. Synchronize termination API
361
362 .. code-block:: c
363
364 void dmaengine_synchronize(struct dma_chan *chan)
365
366 Synchronize the termination of the DMA channel to the current context.
367
368 This function should be used after dmaengine_terminate_async() to synchronize
369 the termination of the DMA channel to the current context. The function will
370 wait for the transfer and any running complete callbacks to finish before it
371 returns.
372
373 If dmaengine_terminate_async() is used to stop the DMA channel this function
374 must be called before it is safe to free memory accessed by previously
375 submitted descriptors or to free any resources accessed within the complete
376 callback of previously submitted descriptors.
377
378 The behavior of this function is undefined if dma_async_issue_pending() has
379 been called between dmaengine_terminate_async() and this function.
1====================
2DMA Engine API Guide
3====================
4
5Vinod Koul <vinod dot koul at intel.com>
6
7.. note:: For DMA Engine usage in async_tx please see:
8 ``Documentation/crypto/async-tx-api.rst``
9
10
11Below is a guide to device driver writers on how to use the Slave-DMA API of the
12DMA Engine. This is applicable only for slave DMA usage only.
13
14DMA usage
15=========
16
17The slave DMA usage consists of following steps:
18
19- Allocate a DMA slave channel
20
21- Set slave and controller specific parameters
22
23- Get a descriptor for transaction
24
25- Submit the transaction
26
27- Issue pending requests and wait for callback notification
28
29The details of these operations are:
30
311. Allocate a DMA slave channel
32
33 Channel allocation is slightly different in the slave DMA context,
34 client drivers typically need a channel from a particular DMA
35 controller only and even in some cases a specific channel is desired.
36 To request a channel dma_request_chan() API is used.
37
38 Interface:
39
40 .. code-block:: c
41
42 struct dma_chan *dma_request_chan(struct device *dev, const char *name);
43
44 Which will find and return the ``name`` DMA channel associated with the 'dev'
45 device. The association is done via DT, ACPI or board file based
46 dma_slave_map matching table.
47
48 A channel allocated via this interface is exclusive to the caller,
49 until dma_release_channel() is called.
50
512. Set slave and controller specific parameters
52
53 Next step is always to pass some specific information to the DMA
54 driver. Most of the generic information which a slave DMA can use
55 is in struct dma_slave_config. This allows the clients to specify
56 DMA direction, DMA addresses, bus widths, DMA burst lengths etc
57 for the peripheral.
58
59 If some DMA controllers have more parameters to be sent then they
60 should try to embed struct dma_slave_config in their controller
61 specific structure. That gives flexibility to client to pass more
62 parameters, if required.
63
64 Interface:
65
66 .. code-block:: c
67
68 int dmaengine_slave_config(struct dma_chan *chan,
69 struct dma_slave_config *config)
70
71 Please see the dma_slave_config structure definition in dmaengine.h
72 for a detailed explanation of the struct members. Please note
73 that the 'direction' member will be going away as it duplicates the
74 direction given in the prepare call.
75
763. Get a descriptor for transaction
77
78 For slave usage the various modes of slave transfers supported by the
79 DMA-engine are:
80
81 - slave_sg: DMA a list of scatter gather buffers from/to a peripheral
82
83 - dma_cyclic: Perform a cyclic DMA operation from/to a peripheral till the
84 operation is explicitly stopped.
85
86 - interleaved_dma: This is common to Slave as well as M2M clients. For slave
87 address of devices' fifo could be already known to the driver.
88 Various types of operations could be expressed by setting
89 appropriate values to the 'dma_interleaved_template' members. Cyclic
90 interleaved DMA transfers are also possible if supported by the channel by
91 setting the DMA_PREP_REPEAT transfer flag.
92
93 A non-NULL return of this transfer API represents a "descriptor" for
94 the given transaction.
95
96 Interface:
97
98 .. code-block:: c
99
100 struct dma_async_tx_descriptor *dmaengine_prep_slave_sg(
101 struct dma_chan *chan, struct scatterlist *sgl,
102 unsigned int sg_len, enum dma_data_direction direction,
103 unsigned long flags);
104
105 struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic(
106 struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
107 size_t period_len, enum dma_data_direction direction);
108
109 struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
110 struct dma_chan *chan, struct dma_interleaved_template *xt,
111 unsigned long flags);
112
113 The peripheral driver is expected to have mapped the scatterlist for
114 the DMA operation prior to calling dmaengine_prep_slave_sg(), and must
115 keep the scatterlist mapped until the DMA operation has completed.
116 The scatterlist must be mapped using the DMA struct device.
117 If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
118 called using the DMA struct device, too.
119 So, normal setup should look like this:
120
121 .. code-block:: c
122
123 struct device *dma_dev = dmaengine_get_dma_device(chan);
124
125 nr_sg = dma_map_sg(dma_dev, sgl, sg_len);
126 if (nr_sg == 0)
127 /* error */
128
129 desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags);
130
131 Once a descriptor has been obtained, the callback information can be
132 added and the descriptor must then be submitted. Some DMA engine
133 drivers may hold a spinlock between a successful preparation and
134 submission so it is important that these two operations are closely
135 paired.
136
137 .. note::
138
139 Although the async_tx API specifies that completion callback
140 routines cannot submit any new operations, this is not the
141 case for slave/cyclic DMA.
142
143 For slave DMA, the subsequent transaction may not be available
144 for submission prior to callback function being invoked, so
145 slave DMA callbacks are permitted to prepare and submit a new
146 transaction.
147
148 For cyclic DMA, a callback function may wish to terminate the
149 DMA via dmaengine_terminate_async().
150
151 Therefore, it is important that DMA engine drivers drop any
152 locks before calling the callback function which may cause a
153 deadlock.
154
155 Note that callbacks will always be invoked from the DMA
156 engines tasklet, never from interrupt context.
157
158 **Optional: per descriptor metadata**
159
160 DMAengine provides two ways for metadata support.
161
162 DESC_METADATA_CLIENT
163
164 The metadata buffer is allocated/provided by the client driver and it is
165 attached to the descriptor.
166
167 .. code-block:: c
168
169 int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc,
170 void *data, size_t len);
171
172 DESC_METADATA_ENGINE
173
174 The metadata buffer is allocated/managed by the DMA driver. The client
175 driver can ask for the pointer, maximum size and the currently used size of
176 the metadata and can directly update or read it.
177
178 Because the DMA driver manages the memory area containing the metadata,
179 clients must make sure that they do not try to access or get the pointer
180 after their transfer completion callback has run for the descriptor.
181 If no completion callback has been defined for the transfer, then the
182 metadata must not be accessed after issue_pending.
183 In other words: if the aim is to read back metadata after the transfer is
184 completed, then the client must use completion callback.
185
186 .. code-block:: c
187
188 void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc,
189 size_t *payload_len, size_t *max_len);
190
191 int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc,
192 size_t payload_len);
193
194 Client drivers can query if a given mode is supported with:
195
196 .. code-block:: c
197
198 bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan,
199 enum dma_desc_metadata_mode mode);
200
201 Depending on the used mode client drivers must follow different flow.
202
203 DESC_METADATA_CLIENT
204
205 - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
206
207 1. prepare the descriptor (dmaengine_prep_*)
208 construct the metadata in the client's buffer
209 2. use dmaengine_desc_attach_metadata() to attach the buffer to the
210 descriptor
211 3. submit the transfer
212
213 - DMA_DEV_TO_MEM:
214
215 1. prepare the descriptor (dmaengine_prep_*)
216 2. use dmaengine_desc_attach_metadata() to attach the buffer to the
217 descriptor
218 3. submit the transfer
219 4. when the transfer is completed, the metadata should be available in the
220 attached buffer
221
222 DESC_METADATA_ENGINE
223
224 - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM:
225
226 1. prepare the descriptor (dmaengine_prep_*)
227 2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the
228 engine's metadata area
229 3. update the metadata at the pointer
230 4. use dmaengine_desc_set_metadata_len() to tell the DMA engine the
231 amount of data the client has placed into the metadata buffer
232 5. submit the transfer
233
234 - DMA_DEV_TO_MEM:
235
236 1. prepare the descriptor (dmaengine_prep_*)
237 2. submit the transfer
238 3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get
239 the pointer to the engine's metadata area
240 4. read out the metadata from the pointer
241
242 .. note::
243
244 When DESC_METADATA_ENGINE mode is used the metadata area for the descriptor
245 is no longer valid after the transfer has been completed (valid up to the
246 point when the completion callback returns if used).
247
248 Mixed use of DESC_METADATA_CLIENT / DESC_METADATA_ENGINE is not allowed,
249 client drivers must use either of the modes per descriptor.
250
2514. Submit the transaction
252
253 Once the descriptor has been prepared and the callback information
254 added, it must be placed on the DMA engine drivers pending queue.
255
256 Interface:
257
258 .. code-block:: c
259
260 dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
261
262 This returns a cookie can be used to check the progress of DMA engine
263 activity via other DMA engine calls not covered in this document.
264
265 dmaengine_submit() will not start the DMA operation, it merely adds
266 it to the pending queue. For this, see step 5, dma_async_issue_pending.
267
268 .. note::
269
270 After calling ``dmaengine_submit()`` the submitted transfer descriptor
271 (``struct dma_async_tx_descriptor``) belongs to the DMA engine.
272 Consequently, the client must consider invalid the pointer to that
273 descriptor.
274
2755. Issue pending DMA requests and wait for callback notification
276
277 The transactions in the pending queue can be activated by calling the
278 issue_pending API. If channel is idle then the first transaction in
279 queue is started and subsequent ones queued up.
280
281 On completion of each DMA operation, the next in queue is started and
282 a tasklet triggered. The tasklet will then call the client driver
283 completion callback routine for notification, if set.
284
285 Interface:
286
287 .. code-block:: c
288
289 void dma_async_issue_pending(struct dma_chan *chan);
290
291Further APIs
292------------
293
2941. Terminate APIs
295
296 .. code-block:: c
297
298 int dmaengine_terminate_sync(struct dma_chan *chan)
299 int dmaengine_terminate_async(struct dma_chan *chan)
300 int dmaengine_terminate_all(struct dma_chan *chan) /* DEPRECATED */
301
302 This causes all activity for the DMA channel to be stopped, and may
303 discard data in the DMA FIFO which hasn't been fully transferred.
304 No callback functions will be called for any incomplete transfers.
305
306 Two variants of this function are available.
307
308 dmaengine_terminate_async() might not wait until the DMA has been fully
309 stopped or until any running complete callbacks have finished. But it is
310 possible to call dmaengine_terminate_async() from atomic context or from
311 within a complete callback. dmaengine_synchronize() must be called before it
312 is safe to free the memory accessed by the DMA transfer or free resources
313 accessed from within the complete callback.
314
315 dmaengine_terminate_sync() will wait for the transfer and any running
316 complete callbacks to finish before it returns. But the function must not be
317 called from atomic context or from within a complete callback.
318
319 dmaengine_terminate_all() is deprecated and should not be used in new code.
320
3212. Pause API
322
323 .. code-block:: c
324
325 int dmaengine_pause(struct dma_chan *chan)
326
327 This pauses activity on the DMA channel without data loss.
328
3293. Resume API
330
331 .. code-block:: c
332
333 int dmaengine_resume(struct dma_chan *chan)
334
335 Resume a previously paused DMA channel. It is invalid to resume a
336 channel which is not currently paused.
337
3384. Check Txn complete
339
340 .. code-block:: c
341
342 enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
343 dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
344
345 This can be used to check the status of the channel. Please see
346 the documentation in include/linux/dmaengine.h for a more complete
347 description of this API.
348
349 This can be used in conjunction with dma_async_is_complete() and
350 the cookie returned from dmaengine_submit() to check for
351 completion of a specific DMA transaction.
352
353 .. note::
354
355 Not all DMA engine drivers can return reliable information for
356 a running DMA channel. It is recommended that DMA engine users
357 pause or stop (via dmaengine_terminate_all()) the channel before
358 using this API.
359
3605. Synchronize termination API
361
362 .. code-block:: c
363
364 void dmaengine_synchronize(struct dma_chan *chan)
365
366 Synchronize the termination of the DMA channel to the current context.
367
368 This function should be used after dmaengine_terminate_async() to synchronize
369 the termination of the DMA channel to the current context. The function will
370 wait for the transfer and any running complete callbacks to finish before it
371 returns.
372
373 If dmaengine_terminate_async() is used to stop the DMA channel this function
374 must be called before it is safe to free memory accessed by previously
375 submitted descriptors or to free any resources accessed within the complete
376 callback of previously submitted descriptors.
377
378 The behavior of this function is undefined if dma_async_issue_pending() has
379 been called between dmaengine_terminate_async() and this function.