Loading...
1perf-c2c(1)
2===========
3
4NAME
5----
6perf-c2c - Shared Data C2C/HITM Analyzer.
7
8SYNOPSIS
9--------
10[verse]
11'perf c2c record' [<options>] <command>
12'perf c2c record' [<options>] \-- [<record command options>] <command>
13'perf c2c report' [<options>]
14
15DESCRIPTION
16-----------
17C2C stands for Cache To Cache.
18
19The perf c2c tool provides means for Shared Data C2C/HITM analysis. It allows
20you to track down the cacheline contentions.
21
22On Intel, the tool is based on load latency and precise store facility events
23provided by Intel CPUs. On PowerPC, the tool uses random instruction sampling
24with thresholding feature. On AMD, the tool uses IBS op pmu (due to hardware
25limitations, perf c2c is not supported on Zen3 cpus).
26
27These events provide:
28 - memory address of the access
29 - type of the access (load and store details)
30 - latency (in cycles) of the load access
31
32The c2c tool provide means to record this data and report back access details
33for cachelines with highest contention - highest number of HITM accesses.
34
35The basic workflow with this tool follows the standard record/report phase.
36User uses the record command to record events data and report command to
37display it.
38
39
40RECORD OPTIONS
41--------------
42-e::
43--event=::
44 Select the PMU event. Use 'perf c2c record -e list'
45 to list available events.
46
47-v::
48--verbose::
49 Be more verbose (show counter open errors, etc).
50
51-l::
52--ldlat::
53 Configure mem-loads latency. Supported on Intel and Arm64 processors
54 only. Ignored on other archs.
55
56-k::
57--all-kernel::
58 Configure all used events to run in kernel space.
59
60-u::
61--all-user::
62 Configure all used events to run in user space.
63
64REPORT OPTIONS
65--------------
66-k::
67--vmlinux=<file>::
68 vmlinux pathname
69
70-v::
71--verbose::
72 Be more verbose (show counter open errors, etc).
73
74-i::
75--input::
76 Specify the input file to process.
77
78-N::
79--node-info::
80 Show extra node info in report (see NODE INFO section)
81
82-c::
83--coalesce::
84 Specify sorting fields for single cacheline display.
85 Following fields are available: tid,pid,iaddr,dso
86 (see COALESCE)
87
88-g::
89--call-graph::
90 Setup callchains parameters.
91 Please refer to perf-report man page for details.
92
93--stdio::
94 Force the stdio output (see STDIO OUTPUT)
95
96--stats::
97 Display only statistic tables and force stdio mode.
98
99--full-symbols::
100 Display full length of symbols.
101
102--no-source::
103 Do not display Source:Line column.
104
105--show-all::
106 Show all captured HITM lines, with no regard to HITM % 0.0005 limit.
107
108-f::
109--force::
110 Don't do ownership validation.
111
112-d::
113--display::
114 Switch to HITM type (rmt, lcl) or peer snooping type (peer) to display
115 and sort on. Total HITMs (tot) as default, except Arm64 uses peer mode
116 as default.
117
118--stitch-lbr::
119 Show callgraph with stitched LBRs, which may have more complete
120 callgraph. The perf.data file must have been obtained using
121 perf c2c record --call-graph lbr.
122 Disabled by default. In common cases with call stack overflows,
123 it can recreate better call stacks than the default lbr call stack
124 output. But this approach is not full proof. There can be cases
125 where it creates incorrect call stacks from incorrect matches.
126 The known limitations include exception handing such as
127 setjmp/longjmp will have calls/returns not match.
128
129C2C RECORD
130----------
131The perf c2c record command setup options related to HITM cacheline analysis
132and calls standard perf record command.
133
134Following perf record options are configured by default:
135(check perf record man page for details)
136
137 -W,-d,--phys-data,--sample-cpu
138
139Unless specified otherwise with '-e' option, following events are monitored by
140default on Intel:
141
142 cpu/mem-loads,ldlat=30/P
143 cpu/mem-stores/P
144
145following on AMD:
146
147 ibs_op//
148
149and following on PowerPC:
150
151 cpu/mem-loads/
152 cpu/mem-stores/
153
154User can pass any 'perf record' option behind '--' mark, like (to enable
155callchains and system wide monitoring):
156
157 $ perf c2c record -- -g -a
158
159Please check RECORD OPTIONS section for specific c2c record options.
160
161C2C REPORT
162----------
163The perf c2c report command displays shared data analysis. It comes in two
164display modes: stdio and tui (default).
165
166The report command workflow is following:
167 - sort all the data based on the cacheline address
168 - store access details for each cacheline
169 - sort all cachelines based on user settings
170 - display data
171
172In general perf report output consist of 2 basic views:
173 1) most expensive cachelines list
174 2) offsets details for each cacheline
175
176For each cacheline in the 1) list we display following data:
177(Both stdio and TUI modes follow the same fields output)
178
179 Index
180 - zero based index to identify the cacheline
181
182 Cacheline
183 - cacheline address (hex number)
184
185 Rmt/Lcl Hitm (Display with HITM types)
186 - cacheline percentage of all Remote/Local HITM accesses
187
188 Peer Snoop (Display with peer type)
189 - cacheline percentage of all peer accesses
190
191 LLC Load Hitm - Total, LclHitm, RmtHitm (For display with HITM types)
192 - count of Total/Local/Remote load HITMs
193
194 Load Peer - Total, Local, Remote (For display with peer type)
195 - count of Total/Local/Remote load from peer cache or DRAM
196
197 Total records
198 - sum of all cachelines accesses
199
200 Total loads
201 - sum of all load accesses
202
203 Total stores
204 - sum of all store accesses
205
206 Store Reference - L1Hit, L1Miss, N/A
207 L1Hit - store accesses that hit L1
208 L1Miss - store accesses that missed L1
209 N/A - store accesses with memory level is not available
210
211 Core Load Hit - FB, L1, L2
212 - count of load hits in FB (Fill Buffer), L1 and L2 cache
213
214 LLC Load Hit - LlcHit, LclHitm
215 - count of LLC load accesses, includes LLC hits and LLC HITMs
216
217 RMT Load Hit - RmtHit, RmtHitm
218 - count of remote load accesses, includes remote hits and remote HITMs;
219 on Arm neoverse cores, RmtHit is used to account remote accesses,
220 includes remote DRAM or any upward cache level in remote node
221
222 Load Dram - Lcl, Rmt
223 - count of local and remote DRAM accesses
224
225For each offset in the 2) list we display following data:
226
227 HITM - Rmt, Lcl (Display with HITM types)
228 - % of Remote/Local HITM accesses for given offset within cacheline
229
230 Peer Snoop - Rmt, Lcl (Display with peer type)
231 - % of Remote/Local peer accesses for given offset within cacheline
232
233 Store Refs - L1 Hit, L1 Miss, N/A
234 - % of store accesses that hit L1, missed L1 and N/A (no available) memory
235 level for given offset within cacheline
236
237 Data address - Offset
238 - offset address
239
240 Pid
241 - pid of the process responsible for the accesses
242
243 Tid
244 - tid of the process responsible for the accesses
245
246 Code address
247 - code address responsible for the accesses
248
249 cycles - rmt hitm, lcl hitm, load (Display with HITM types)
250 - sum of cycles for given accesses - Remote/Local HITM and generic load
251
252 cycles - rmt peer, lcl peer, load (Display with peer type)
253 - sum of cycles for given accesses - Remote/Local peer load and generic load
254
255 cpu cnt
256 - number of cpus that participated on the access
257
258 Symbol
259 - code symbol related to the 'Code address' value
260
261 Shared Object
262 - shared object name related to the 'Code address' value
263
264 Source:Line
265 - source information related to the 'Code address' value
266
267 Node
268 - nodes participating on the access (see NODE INFO section)
269
270NODE INFO
271---------
272The 'Node' field displays nodes that accesses given cacheline
273offset. Its output comes in 3 flavors:
274 - node IDs separated by ','
275 - node IDs with stats for each ID, in following format:
276 Node{cpus %hitms %stores} (Display with HITM types)
277 Node{cpus %peers %stores} (Display with peer type)
278 - node IDs with list of affected CPUs in following format:
279 Node{cpu list}
280
281User can switch between above flavors with -N option or
282use 'n' key to interactively switch in TUI mode.
283
284COALESCE
285--------
286User can specify how to sort offsets for cacheline.
287
288Following fields are available and governs the final
289output fields set for cacheline offsets output:
290
291 tid - coalesced by process TIDs
292 pid - coalesced by process PIDs
293 iaddr - coalesced by code address, following fields are displayed:
294 Code address, Code symbol, Shared Object, Source line
295 dso - coalesced by shared object
296
297By default the coalescing is setup with 'pid,iaddr'.
298
299STDIO OUTPUT
300------------
301The stdio output displays data on standard output.
302
303Following tables are displayed:
304 Trace Event Information
305 - overall statistics of memory accesses
306
307 Global Shared Cache Line Event Information
308 - overall statistics on shared cachelines
309
310 Shared Data Cache Line Table
311 - list of most expensive cachelines
312
313 Shared Cache Line Distribution Pareto
314 - list of all accessed offsets for each cacheline
315
316TUI OUTPUT
317----------
318The TUI output provides interactive interface to navigate
319through cachelines list and to display offset details.
320
321For details please refer to the help window by pressing '?' key.
322
323CREDITS
324-------
325Although Don Zickus, Dick Fowles and Joe Mario worked together
326to get this implemented, we got lots of early help from Arnaldo
327Carvalho de Melo, Stephane Eranian, Jiri Olsa and Andi Kleen.
328
329C2C BLOG
330--------
331Check Joe's blog on c2c tool for detailed use case explanation:
332 https://joemario.github.io/blog/2016/09/01/c2c-blog/
333
334SEE ALSO
335--------
336linkperf:perf-record[1], linkperf:perf-mem[1]
1perf-c2c(1)
2===========
3
4NAME
5----
6perf-c2c - Shared Data C2C/HITM Analyzer.
7
8SYNOPSIS
9--------
10[verse]
11'perf c2c record' [<options>] <command>
12'perf c2c record' [<options>] \-- [<record command options>] <command>
13'perf c2c report' [<options>]
14
15DESCRIPTION
16-----------
17C2C stands for Cache To Cache.
18
19The perf c2c tool provides means for Shared Data C2C/HITM analysis. It allows
20you to track down the cacheline contentions.
21
22On Intel, the tool is based on load latency and precise store facility events
23provided by Intel CPUs. On PowerPC, the tool uses random instruction sampling
24with thresholding feature. On AMD, the tool uses IBS op pmu (due to hardware
25limitations, perf c2c is not supported on Zen3 cpus). On Arm64 it uses SPE to
26sample load and store operations, therefore hardware and kernel support is
27required. See linkperf:perf-arm-spe[1] for a setup guide. Due to the
28statistical nature of Arm SPE sampling, not every memory operation will be
29sampled.
30
31These events provide:
32 - memory address of the access
33 - type of the access (load and store details)
34 - latency (in cycles) of the load access
35
36The c2c tool provide means to record this data and report back access details
37for cachelines with highest contention - highest number of HITM accesses.
38
39The basic workflow with this tool follows the standard record/report phase.
40User uses the record command to record events data and report command to
41display it.
42
43
44RECORD OPTIONS
45--------------
46-e::
47--event=::
48 Select the PMU event. Use 'perf c2c record -e list'
49 to list available events.
50
51-v::
52--verbose::
53 Be more verbose (show counter open errors, etc).
54
55-l::
56--ldlat::
57 Configure mem-loads latency. Supported on Intel and Arm64 processors
58 only. Ignored on other archs.
59
60-k::
61--all-kernel::
62 Configure all used events to run in kernel space.
63
64-u::
65--all-user::
66 Configure all used events to run in user space.
67
68REPORT OPTIONS
69--------------
70-k::
71--vmlinux=<file>::
72 vmlinux pathname
73
74-v::
75--verbose::
76 Be more verbose (show counter open errors, etc).
77
78-i::
79--input::
80 Specify the input file to process.
81
82-N::
83--node-info::
84 Show extra node info in report (see NODE INFO section)
85
86-c::
87--coalesce::
88 Specify sorting fields for single cacheline display.
89 Following fields are available: tid,pid,iaddr,dso
90 (see COALESCE)
91
92-g::
93--call-graph::
94 Setup callchains parameters.
95 Please refer to perf-report man page for details.
96
97--stdio::
98 Force the stdio output (see STDIO OUTPUT)
99
100--stats::
101 Display only statistic tables and force stdio mode.
102
103--full-symbols::
104 Display full length of symbols.
105
106--no-source::
107 Do not display Source:Line column.
108
109--show-all::
110 Show all captured HITM lines, with no regard to HITM % 0.0005 limit.
111
112-f::
113--force::
114 Don't do ownership validation.
115
116-d::
117--display::
118 Switch to HITM type (rmt, lcl) or peer snooping type (peer) to display
119 and sort on. Total HITMs (tot) as default, except Arm64 uses peer mode
120 as default.
121
122--stitch-lbr::
123 Show callgraph with stitched LBRs, which may have more complete
124 callgraph. The perf.data file must have been obtained using
125 perf c2c record --call-graph lbr.
126 Disabled by default. In common cases with call stack overflows,
127 it can recreate better call stacks than the default lbr call stack
128 output. But this approach is not foolproof. There can be cases
129 where it creates incorrect call stacks from incorrect matches.
130 The known limitations include exception handing such as
131 setjmp/longjmp will have calls/returns not match.
132
133--double-cl::
134 Group the detection of shared cacheline events into double cacheline
135 granularity. Some architectures have an Adjacent Cacheline Prefetch
136 feature, which causes cacheline sharing to behave like the cacheline
137 size is doubled.
138
139C2C RECORD
140----------
141The perf c2c record command setup options related to HITM cacheline analysis
142and calls standard perf record command.
143
144Following perf record options are configured by default:
145(check perf record man page for details)
146
147 -W,-d,--phys-data,--sample-cpu
148
149Unless specified otherwise with '-e' option, following events are monitored by
150default on Intel:
151
152 cpu/mem-loads,ldlat=30/P
153 cpu/mem-stores/P
154
155following on AMD:
156
157 ibs_op//
158
159and following on PowerPC:
160
161 cpu/mem-loads/
162 cpu/mem-stores/
163
164User can pass any 'perf record' option behind '--' mark, like (to enable
165callchains and system wide monitoring):
166
167 $ perf c2c record -- -g -a
168
169Please check RECORD OPTIONS section for specific c2c record options.
170
171C2C REPORT
172----------
173The perf c2c report command displays shared data analysis. It comes in two
174display modes: stdio and tui (default).
175
176The report command workflow is following:
177 - sort all the data based on the cacheline address
178 - store access details for each cacheline
179 - sort all cachelines based on user settings
180 - display data
181
182In general perf report output consist of 2 basic views:
183 1) most expensive cachelines list
184 2) offsets details for each cacheline
185
186For each cacheline in the 1) list we display following data:
187(Both stdio and TUI modes follow the same fields output)
188
189 Index
190 - zero based index to identify the cacheline
191
192 Cacheline
193 - cacheline address (hex number)
194
195 Rmt/Lcl Hitm (Display with HITM types)
196 - cacheline percentage of all Remote/Local HITM accesses
197
198 Peer Snoop (Display with peer type)
199 - cacheline percentage of all peer accesses
200
201 LLC Load Hitm - Total, LclHitm, RmtHitm (For display with HITM types)
202 - count of Total/Local/Remote load HITMs
203
204 Load Peer - Total, Local, Remote (For display with peer type)
205 - count of Total/Local/Remote load from peer cache or DRAM
206
207 Total records
208 - sum of all cachelines accesses
209
210 Total loads
211 - sum of all load accesses
212
213 Total stores
214 - sum of all store accesses
215
216 Store Reference - L1Hit, L1Miss, N/A
217 L1Hit - store accesses that hit L1
218 L1Miss - store accesses that missed L1
219 N/A - store accesses with memory level is not available
220
221 Core Load Hit - FB, L1, L2
222 - count of load hits in FB (Fill Buffer), L1 and L2 cache
223
224 LLC Load Hit - LlcHit, LclHitm
225 - count of LLC load accesses, includes LLC hits and LLC HITMs
226
227 RMT Load Hit - RmtHit, RmtHitm
228 - count of remote load accesses, includes remote hits and remote HITMs;
229 on Arm neoverse cores, RmtHit is used to account remote accesses,
230 includes remote DRAM or any upward cache level in remote node
231
232 Load Dram - Lcl, Rmt
233 - count of local and remote DRAM accesses
234
235For each offset in the 2) list we display following data:
236
237 HITM - Rmt, Lcl (Display with HITM types)
238 - % of Remote/Local HITM accesses for given offset within cacheline
239
240 Peer Snoop - Rmt, Lcl (Display with peer type)
241 - % of Remote/Local peer accesses for given offset within cacheline
242
243 Store Refs - L1 Hit, L1 Miss, N/A
244 - % of store accesses that hit L1, missed L1 and N/A (no available) memory
245 level for given offset within cacheline
246
247 Data address - Offset
248 - offset address
249
250 Pid
251 - pid of the process responsible for the accesses
252
253 Tid
254 - tid of the process responsible for the accesses
255
256 Code address
257 - code address responsible for the accesses
258
259 cycles - rmt hitm, lcl hitm, load (Display with HITM types)
260 - sum of cycles for given accesses - Remote/Local HITM and generic load
261
262 cycles - rmt peer, lcl peer, load (Display with peer type)
263 - sum of cycles for given accesses - Remote/Local peer load and generic load
264
265 cpu cnt
266 - number of cpus that participated on the access
267
268 Symbol
269 - code symbol related to the 'Code address' value
270
271 Shared Object
272 - shared object name related to the 'Code address' value
273
274 Source:Line
275 - source information related to the 'Code address' value
276
277 Node
278 - nodes participating on the access (see NODE INFO section)
279
280NODE INFO
281---------
282The 'Node' field displays nodes that accesses given cacheline
283offset. Its output comes in 3 flavors:
284 - node IDs separated by ','
285 - node IDs with stats for each ID, in following format:
286 Node{cpus %hitms %stores} (Display with HITM types)
287 Node{cpus %peers %stores} (Display with peer type)
288 - node IDs with list of affected CPUs in following format:
289 Node{cpu list}
290
291User can switch between above flavors with -N option or
292use 'n' key to interactively switch in TUI mode.
293
294COALESCE
295--------
296User can specify how to sort offsets for cacheline.
297
298Following fields are available and governs the final
299output fields set for cacheline offsets output:
300
301 tid - coalesced by process TIDs
302 pid - coalesced by process PIDs
303 iaddr - coalesced by code address, following fields are displayed:
304 Code address, Code symbol, Shared Object, Source line
305 dso - coalesced by shared object
306
307By default the coalescing is setup with 'pid,iaddr'.
308
309STDIO OUTPUT
310------------
311The stdio output displays data on standard output.
312
313Following tables are displayed:
314 Trace Event Information
315 - overall statistics of memory accesses
316
317 Global Shared Cache Line Event Information
318 - overall statistics on shared cachelines
319
320 Shared Data Cache Line Table
321 - list of most expensive cachelines
322
323 Shared Cache Line Distribution Pareto
324 - list of all accessed offsets for each cacheline
325
326TUI OUTPUT
327----------
328The TUI output provides interactive interface to navigate
329through cachelines list and to display offset details.
330
331For details please refer to the help window by pressing '?' key.
332
333CREDITS
334-------
335Although Don Zickus, Dick Fowles and Joe Mario worked together
336to get this implemented, we got lots of early help from Arnaldo
337Carvalho de Melo, Stephane Eranian, Jiri Olsa and Andi Kleen.
338
339C2C BLOG
340--------
341Check Joe's blog on c2c tool for detailed use case explanation:
342 https://joemario.github.io/blog/2016/09/01/c2c-blog/
343
344SEE ALSO
345--------
346linkperf:perf-record[1], linkperf:perf-mem[1], linkperf:perf-arm-spe[1]