Linux Audio

Check our new training course

Loading...
v6.2
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * OpenRISC signal.c
  4 *
  5 * Linux architectural port borrowing liberally from similar works of
  6 * others.  All original copyrights apply as per the original source
  7 * declaration.
  8 *
  9 * Modifications for the OpenRISC architecture:
 10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
 11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
 12 */
 13
 14#include <linux/sched.h>
 15#include <linux/mm.h>
 16#include <linux/smp.h>
 17#include <linux/kernel.h>
 18#include <linux/signal.h>
 19#include <linux/errno.h>
 20#include <linux/wait.h>
 21#include <linux/ptrace.h>
 22#include <linux/unistd.h>
 23#include <linux/stddef.h>
 24#include <linux/resume_user_mode.h>
 25
 
 26#include <asm/processor.h>
 27#include <asm/syscall.h>
 28#include <asm/ucontext.h>
 29#include <linux/uaccess.h>
 30
 31struct rt_sigframe {
 32	struct siginfo info;
 33	struct ucontext uc;
 34	unsigned char retcode[16];	/* trampoline code */
 35};
 36
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 37static int restore_sigcontext(struct pt_regs *regs,
 38			      struct sigcontext __user *sc)
 39{
 40	int err = 0;
 41
 42	/* Always make any pending restarted system calls return -EINTR */
 43	current->restart_block.fn = do_no_restart_syscall;
 44
 45	/*
 46	 * Restore the regs from &sc->regs.
 47	 * (sc is already checked since the sigframe was
 48	 *  checked in sys_sigreturn previously)
 49	 */
 50	err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long));
 51	err |= __copy_from_user(&regs->pc, &sc->regs.pc, sizeof(unsigned long));
 52	err |= __copy_from_user(&regs->sr, &sc->regs.sr, sizeof(unsigned long));
 
 53
 54	/* make sure the SM-bit is cleared so user-mode cannot fool us */
 55	regs->sr &= ~SPR_SR_SM;
 56
 57	regs->orig_gpr11 = -1;	/* Avoid syscall restart checks */
 58
 59	/* TODO: the other ports use regs->orig_XX to disable syscall checks
 60	 * after this completes, but we don't use that mechanism. maybe we can
 61	 * use it now ?
 62	 */
 63
 64	return err;
 65}
 66
 67asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
 68{
 69	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->sp;
 70	sigset_t set;
 71
 72	/*
 73	 * Since we stacked the signal on a dword boundary,
 74	 * then frame should be dword aligned here.  If it's
 75	 * not, then the user is trying to mess with us.
 76	 */
 77	if (((unsigned long)frame) & 3)
 78		goto badframe;
 79
 80	if (!access_ok(frame, sizeof(*frame)))
 81		goto badframe;
 82	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 83		goto badframe;
 84
 85	set_current_blocked(&set);
 86
 87	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 88		goto badframe;
 89
 90	if (restore_altstack(&frame->uc.uc_stack))
 91		goto badframe;
 92
 93	return regs->gpr[11];
 94
 95badframe:
 96	force_sig(SIGSEGV);
 97	return 0;
 98}
 99
100/*
101 * Set up a signal frame.
102 */
103
104static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
105{
106	int err = 0;
107
108	/* copy the regs */
109	/* There should be no need to save callee-saved registers here...
110	 * ...but we save them anyway.  Revisit this
111	 */
112	err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
113	err |= __copy_to_user(&sc->regs.pc, &regs->pc, sizeof(unsigned long));
114	err |= __copy_to_user(&sc->regs.sr, &regs->sr, sizeof(unsigned long));
 
115
116	return err;
117}
118
119static inline unsigned long align_sigframe(unsigned long sp)
120{
121	return sp & ~3UL;
122}
123
124/*
125 * Work out where the signal frame should go.  It's either on the user stack
126 * or the alternate stack.
127 */
128
129static inline void __user *get_sigframe(struct ksignal *ksig,
130					struct pt_regs *regs, size_t frame_size)
131{
132	unsigned long sp = regs->sp;
133
134	/* redzone */
135	sp -= STACK_FRAME_OVERHEAD;
136	sp = sigsp(sp, ksig);
137	sp = align_sigframe(sp - frame_size);
138
139	return (void __user *)sp;
140}
141
142/* grab and setup a signal frame.
143 *
144 * basically we stack a lot of state info, and arrange for the
145 * user-mode program to return to the kernel using either a
146 * trampoline which performs the syscall sigreturn, or a provided
147 * user-mode trampoline.
148 */
149static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
150			  struct pt_regs *regs)
151{
152	struct rt_sigframe __user *frame;
153	unsigned long return_ip;
154	int err = 0;
155
156	frame = get_sigframe(ksig, regs, sizeof(*frame));
157
158	if (!access_ok(frame, sizeof(*frame)))
159		return -EFAULT;
160
161	/* Create siginfo.  */
162	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
163		err |= copy_siginfo_to_user(&frame->info, &ksig->info);
164
165	/* Create the ucontext.  */
166	err |= __put_user(0, &frame->uc.uc_flags);
167	err |= __put_user(NULL, &frame->uc.uc_link);
168	err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
169	err |= setup_sigcontext(regs, &frame->uc.uc_mcontext);
170
171	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
172
173	if (err)
174		return -EFAULT;
175
176	/* trampoline - the desired return ip is the retcode itself */
177	return_ip = (unsigned long)&frame->retcode;
178	/* This is:
179		l.ori r11,r0,__NR_sigreturn
180		l.sys 1
181	 */
182	err |= __put_user(0xa960,             (short __user *)(frame->retcode + 0));
183	err |= __put_user(__NR_rt_sigreturn,  (short __user *)(frame->retcode + 2));
184	err |= __put_user(0x20000001, (unsigned long __user *)(frame->retcode + 4));
185	err |= __put_user(0x15000000, (unsigned long __user *)(frame->retcode + 8));
186
187	if (err)
188		return -EFAULT;
189
190	/* Set up registers for signal handler */
191	regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */
192	regs->gpr[9] = (unsigned long)return_ip;     /* what we enter LATER */
193	regs->gpr[3] = (unsigned long)ksig->sig;           /* arg 1: signo */
194	regs->gpr[4] = (unsigned long)&frame->info;  /* arg 2: (siginfo_t*) */
195	regs->gpr[5] = (unsigned long)&frame->uc;    /* arg 3: ucontext */
196
197	/* actually move the usp to reflect the stacked frame */
198	regs->sp = (unsigned long)frame;
199
200	return 0;
201}
202
203static inline void
204handle_signal(struct ksignal *ksig, struct pt_regs *regs)
205{
206	int ret;
207
208	ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
209
210	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
211}
212
213/*
214 * Note that 'init' is a special process: it doesn't get signals it doesn't
215 * want to handle. Thus you cannot kill init even with a SIGKILL even by
216 * mistake.
217 *
218 * Also note that the regs structure given here as an argument, is the latest
219 * pushed pt_regs. It may or may not be the same as the first pushed registers
220 * when the initial usermode->kernelmode transition took place. Therefore
221 * we can use user_mode(regs) to see if we came directly from kernel or user
222 * mode below.
223 */
224
225int do_signal(struct pt_regs *regs, int syscall)
226{
227	struct ksignal ksig;
228	unsigned long continue_addr = 0;
229	unsigned long restart_addr = 0;
230	unsigned long retval = 0;
231	int restart = 0;
232
233	if (syscall) {
234		continue_addr = regs->pc;
235		restart_addr = continue_addr - 4;
236		retval = regs->gpr[11];
237
238		/*
239		 * Setup syscall restart here so that a debugger will
240		 * see the already changed PC.
241		 */
242		switch (retval) {
243		case -ERESTART_RESTARTBLOCK:
244			restart = -2;
245			fallthrough;
246		case -ERESTARTNOHAND:
247		case -ERESTARTSYS:
248		case -ERESTARTNOINTR:
249			restart++;
250			regs->gpr[11] = regs->orig_gpr11;
251			regs->pc = restart_addr;
252			break;
253		}
254	}
255
256	/*
257	 * Get the signal to deliver.  During the call to get_signal the
258	 * debugger may change all our registers so we may need to revert
259	 * the decision to restart the syscall; specifically, if the PC is
260	 * changed, don't restart the syscall.
261	 */
262	if (get_signal(&ksig)) {
263		if (unlikely(restart) && regs->pc == restart_addr) {
264			if (retval == -ERESTARTNOHAND ||
265			    retval == -ERESTART_RESTARTBLOCK
266			    || (retval == -ERESTARTSYS
267			        && !(ksig.ka.sa.sa_flags & SA_RESTART))) {
268				/* No automatic restart */
269				regs->gpr[11] = -EINTR;
270				regs->pc = continue_addr;
271			}
272		}
273		handle_signal(&ksig, regs);
274	} else {
275		/* no handler */
276		restore_saved_sigmask();
277		/*
278		 * Restore pt_regs PC as syscall restart will be handled by
279		 * kernel without return to userspace
280		 */
281		if (unlikely(restart) && regs->pc == restart_addr) {
282			regs->pc = continue_addr;
283			return restart;
284		}
285	}
286
287	return 0;
288}
289
290asmlinkage int
291do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
292{
293	do {
294		if (likely(thread_flags & _TIF_NEED_RESCHED)) {
295			schedule();
296		} else {
297			if (unlikely(!user_mode(regs)))
298				return 0;
299			local_irq_enable();
300			if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
301				int restart = do_signal(regs, syscall);
302				if (unlikely(restart)) {
303					/*
304					 * Restart without handlers.
305					 * Deal with it without leaving
306					 * the kernel space.
307					 */
308					return restart;
309				}
310				syscall = 0;
311			} else {
312				resume_user_mode_work(regs);
313			}
314		}
315		local_irq_disable();
316		thread_flags = read_thread_flags();
317	} while (thread_flags & _TIF_WORK_MASK);
318	return 0;
319}
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * OpenRISC signal.c
  4 *
  5 * Linux architectural port borrowing liberally from similar works of
  6 * others.  All original copyrights apply as per the original source
  7 * declaration.
  8 *
  9 * Modifications for the OpenRISC architecture:
 10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
 11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
 12 */
 13
 14#include <linux/sched.h>
 15#include <linux/mm.h>
 16#include <linux/smp.h>
 17#include <linux/kernel.h>
 18#include <linux/signal.h>
 19#include <linux/errno.h>
 20#include <linux/wait.h>
 21#include <linux/ptrace.h>
 22#include <linux/unistd.h>
 23#include <linux/stddef.h>
 24#include <linux/resume_user_mode.h>
 25
 26#include <asm/fpu.h>
 27#include <asm/processor.h>
 28#include <asm/syscall.h>
 29#include <asm/ucontext.h>
 30#include <linux/uaccess.h>
 31
 32struct rt_sigframe {
 33	struct siginfo info;
 34	struct ucontext uc;
 35	unsigned char retcode[16];	/* trampoline code */
 36};
 37
 38asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs);
 39
 40asmlinkage int do_work_pending(struct pt_regs *regs, unsigned int thread_flags,
 41			       int syscall);
 42
 43#ifdef CONFIG_FPU
 44static long restore_fp_state(struct sigcontext __user *sc)
 45{
 46	long err;
 47
 48	err = __copy_from_user(&current->thread.fpcsr, &sc->fpcsr, sizeof(unsigned long));
 49	if (unlikely(err))
 50		return err;
 51
 52	/* Restore the FPU state */
 53	restore_fpu(current);
 54
 55	return 0;
 56}
 57
 58static long save_fp_state(struct sigcontext __user *sc)
 59{
 60	long err;
 61
 62	/* Sync the user FPU state so we can copy to sigcontext */
 63	save_fpu(current);
 64
 65	err = __copy_to_user(&sc->fpcsr, &current->thread.fpcsr, sizeof(unsigned long));
 66
 67	return err;
 68}
 69#else
 70#define save_fp_state(sc) (0)
 71#define restore_fp_state(sc) (0)
 72#endif
 73
 74static int restore_sigcontext(struct pt_regs *regs,
 75			      struct sigcontext __user *sc)
 76{
 77	int err = 0;
 78
 79	/* Always make any pending restarted system calls return -EINTR */
 80	current->restart_block.fn = do_no_restart_syscall;
 81
 82	/*
 83	 * Restore the regs from &sc->regs.
 84	 * (sc is already checked since the sigframe was
 85	 *  checked in sys_sigreturn previously)
 86	 */
 87	err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long));
 88	err |= __copy_from_user(&regs->pc, &sc->regs.pc, sizeof(unsigned long));
 89	err |= __copy_from_user(&regs->sr, &sc->regs.sr, sizeof(unsigned long));
 90	err |= restore_fp_state(sc);
 91
 92	/* make sure the SM-bit is cleared so user-mode cannot fool us */
 93	regs->sr &= ~SPR_SR_SM;
 94
 95	regs->orig_gpr11 = -1;	/* Avoid syscall restart checks */
 96
 97	/* TODO: the other ports use regs->orig_XX to disable syscall checks
 98	 * after this completes, but we don't use that mechanism. maybe we can
 99	 * use it now ?
100	 */
101
102	return err;
103}
104
105asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
106{
107	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->sp;
108	sigset_t set;
109
110	/*
111	 * Since we stacked the signal on a dword boundary,
112	 * then frame should be dword aligned here.  If it's
113	 * not, then the user is trying to mess with us.
114	 */
115	if (((unsigned long)frame) & 3)
116		goto badframe;
117
118	if (!access_ok(frame, sizeof(*frame)))
119		goto badframe;
120	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
121		goto badframe;
122
123	set_current_blocked(&set);
124
125	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
126		goto badframe;
127
128	if (restore_altstack(&frame->uc.uc_stack))
129		goto badframe;
130
131	return regs->gpr[11];
132
133badframe:
134	force_sig(SIGSEGV);
135	return 0;
136}
137
138/*
139 * Set up a signal frame.
140 */
141
142static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
143{
144	int err = 0;
145
146	/* copy the regs */
147	/* There should be no need to save callee-saved registers here...
148	 * ...but we save them anyway.  Revisit this
149	 */
150	err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
151	err |= __copy_to_user(&sc->regs.pc, &regs->pc, sizeof(unsigned long));
152	err |= __copy_to_user(&sc->regs.sr, &regs->sr, sizeof(unsigned long));
153	err |= save_fp_state(sc);
154
155	return err;
156}
157
158static inline unsigned long align_sigframe(unsigned long sp)
159{
160	return sp & ~3UL;
161}
162
163/*
164 * Work out where the signal frame should go.  It's either on the user stack
165 * or the alternate stack.
166 */
167
168static inline void __user *get_sigframe(struct ksignal *ksig,
169					struct pt_regs *regs, size_t frame_size)
170{
171	unsigned long sp = regs->sp;
172
173	/* redzone */
174	sp -= STACK_FRAME_OVERHEAD;
175	sp = sigsp(sp, ksig);
176	sp = align_sigframe(sp - frame_size);
177
178	return (void __user *)sp;
179}
180
181/* grab and setup a signal frame.
182 *
183 * basically we stack a lot of state info, and arrange for the
184 * user-mode program to return to the kernel using either a
185 * trampoline which performs the syscall sigreturn, or a provided
186 * user-mode trampoline.
187 */
188static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
189			  struct pt_regs *regs)
190{
191	struct rt_sigframe __user *frame;
192	unsigned long return_ip;
193	int err = 0;
194
195	frame = get_sigframe(ksig, regs, sizeof(*frame));
196
197	if (!access_ok(frame, sizeof(*frame)))
198		return -EFAULT;
199
200	/* Create siginfo.  */
201	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
202		err |= copy_siginfo_to_user(&frame->info, &ksig->info);
203
204	/* Create the ucontext.  */
205	err |= __put_user(0, &frame->uc.uc_flags);
206	err |= __put_user(NULL, &frame->uc.uc_link);
207	err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
208	err |= setup_sigcontext(regs, &frame->uc.uc_mcontext);
209
210	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
211
212	if (err)
213		return -EFAULT;
214
215	/* trampoline - the desired return ip is the retcode itself */
216	return_ip = (unsigned long)&frame->retcode;
217	/* This is:
218		l.ori r11,r0,__NR_sigreturn
219		l.sys 1
220	 */
221	err |= __put_user(0xa960,             (short __user *)(frame->retcode + 0));
222	err |= __put_user(__NR_rt_sigreturn,  (short __user *)(frame->retcode + 2));
223	err |= __put_user(0x20000001, (unsigned long __user *)(frame->retcode + 4));
224	err |= __put_user(0x15000000, (unsigned long __user *)(frame->retcode + 8));
225
226	if (err)
227		return -EFAULT;
228
229	/* Set up registers for signal handler */
230	regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */
231	regs->gpr[9] = (unsigned long)return_ip;     /* what we enter LATER */
232	regs->gpr[3] = (unsigned long)ksig->sig;           /* arg 1: signo */
233	regs->gpr[4] = (unsigned long)&frame->info;  /* arg 2: (siginfo_t*) */
234	regs->gpr[5] = (unsigned long)&frame->uc;    /* arg 3: ucontext */
235
236	/* actually move the usp to reflect the stacked frame */
237	regs->sp = (unsigned long)frame;
238
239	return 0;
240}
241
242static inline void
243handle_signal(struct ksignal *ksig, struct pt_regs *regs)
244{
245	int ret;
246
247	ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
248
249	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
250}
251
252/*
253 * Note that 'init' is a special process: it doesn't get signals it doesn't
254 * want to handle. Thus you cannot kill init even with a SIGKILL even by
255 * mistake.
256 *
257 * Also note that the regs structure given here as an argument, is the latest
258 * pushed pt_regs. It may or may not be the same as the first pushed registers
259 * when the initial usermode->kernelmode transition took place. Therefore
260 * we can use user_mode(regs) to see if we came directly from kernel or user
261 * mode below.
262 */
263
264static int do_signal(struct pt_regs *regs, int syscall)
265{
266	struct ksignal ksig;
267	unsigned long continue_addr = 0;
268	unsigned long restart_addr = 0;
269	unsigned long retval = 0;
270	int restart = 0;
271
272	if (syscall) {
273		continue_addr = regs->pc;
274		restart_addr = continue_addr - 4;
275		retval = regs->gpr[11];
276
277		/*
278		 * Setup syscall restart here so that a debugger will
279		 * see the already changed PC.
280		 */
281		switch (retval) {
282		case -ERESTART_RESTARTBLOCK:
283			restart = -2;
284			fallthrough;
285		case -ERESTARTNOHAND:
286		case -ERESTARTSYS:
287		case -ERESTARTNOINTR:
288			restart++;
289			regs->gpr[11] = regs->orig_gpr11;
290			regs->pc = restart_addr;
291			break;
292		}
293	}
294
295	/*
296	 * Get the signal to deliver.  During the call to get_signal the
297	 * debugger may change all our registers so we may need to revert
298	 * the decision to restart the syscall; specifically, if the PC is
299	 * changed, don't restart the syscall.
300	 */
301	if (get_signal(&ksig)) {
302		if (unlikely(restart) && regs->pc == restart_addr) {
303			if (retval == -ERESTARTNOHAND ||
304			    retval == -ERESTART_RESTARTBLOCK
305			    || (retval == -ERESTARTSYS
306			        && !(ksig.ka.sa.sa_flags & SA_RESTART))) {
307				/* No automatic restart */
308				regs->gpr[11] = -EINTR;
309				regs->pc = continue_addr;
310			}
311		}
312		handle_signal(&ksig, regs);
313	} else {
314		/* no handler */
315		restore_saved_sigmask();
316		/*
317		 * Restore pt_regs PC as syscall restart will be handled by
318		 * kernel without return to userspace
319		 */
320		if (unlikely(restart) && regs->pc == restart_addr) {
321			regs->pc = continue_addr;
322			return restart;
323		}
324	}
325
326	return 0;
327}
328
329asmlinkage int
330do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
331{
332	do {
333		if (likely(thread_flags & _TIF_NEED_RESCHED)) {
334			schedule();
335		} else {
336			if (unlikely(!user_mode(regs)))
337				return 0;
338			local_irq_enable();
339			if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
340				int restart = do_signal(regs, syscall);
341				if (unlikely(restart)) {
342					/*
343					 * Restart without handlers.
344					 * Deal with it without leaving
345					 * the kernel space.
346					 */
347					return restart;
348				}
349				syscall = 0;
350			} else {
351				resume_user_mode_work(regs);
352			}
353		}
354		local_irq_disable();
355		thread_flags = read_thread_flags();
356	} while (thread_flags & _TIF_WORK_MASK);
357	return 0;
358}