Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# For a description of the syntax of this configuration file,
4# see Documentation/kbuild/kconfig-language.rst.
5#
6
7config OPENRISC
8 def_bool y
9 select ARCH_32BIT_OFF_T
10 select ARCH_HAS_DMA_SET_UNCACHED
11 select ARCH_HAS_DMA_CLEAR_UNCACHED
12 select ARCH_HAS_SYNC_DMA_FOR_DEVICE
13 select COMMON_CLK
14 select OF
15 select OF_EARLY_FLATTREE
16 select IRQ_DOMAIN
17 select GPIOLIB
18 select HAVE_ARCH_TRACEHOOK
19 select SPARSE_IRQ
20 select GENERIC_IRQ_CHIP
21 select GENERIC_IRQ_PROBE
22 select GENERIC_IRQ_SHOW
23 select GENERIC_PCI_IOMAP
24 select GENERIC_CPU_DEVICES
25 select HAVE_PCI
26 select HAVE_UID16
27 select GENERIC_ATOMIC64
28 select GENERIC_CLOCKEVENTS_BROADCAST
29 select GENERIC_SMP_IDLE_THREAD
30 select MODULES_USE_ELF_RELA
31 select HAVE_DEBUG_STACKOVERFLOW
32 select OR1K_PIC
33 select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1
34 select ARCH_USE_QUEUED_RWLOCKS
35 select OMPIC if SMP
36 select PCI_DOMAINS_GENERIC if PCI
37 select PCI_MSI if PCI
38 select ARCH_WANT_FRAME_POINTERS
39 select GENERIC_IRQ_MULTI_HANDLER
40 select MMU_GATHER_NO_RANGE if MMU
41 select TRACE_IRQFLAGS_SUPPORT
42
43config CPU_BIG_ENDIAN
44 def_bool y
45
46config MMU
47 def_bool y
48
49config GENERIC_HWEIGHT
50 def_bool y
51
52config NO_IOPORT_MAP
53 def_bool y
54
55# For now, use generic checksum functions
56#These can be reimplemented in assembly later if so inclined
57config GENERIC_CSUM
58 def_bool y
59
60config STACKTRACE_SUPPORT
61 def_bool y
62
63config LOCKDEP_SUPPORT
64 def_bool y
65
66menu "Processor type and features"
67
68choice
69 prompt "Subarchitecture"
70 default OR1K_1200
71
72config OR1K_1200
73 bool "OR1200"
74 help
75 Generic OpenRISC 1200 architecture
76
77endchoice
78
79config DCACHE_WRITETHROUGH
80 bool "Have write through data caches"
81 default n
82 help
83 Select this if your implementation features write through data caches.
84 Selecting 'N' here will allow the kernel to force flushing of data
85 caches at relevant times. Most OpenRISC implementations support write-
86 through data caches.
87
88 If unsure say N here
89
90config OPENRISC_BUILTIN_DTB
91 string "Builtin DTB"
92 default ""
93
94menu "Class II Instructions"
95
96config OPENRISC_HAVE_INST_FF1
97 bool "Have instruction l.ff1"
98 default y
99 help
100 Select this if your implementation has the Class II instruction l.ff1
101
102config OPENRISC_HAVE_INST_FL1
103 bool "Have instruction l.fl1"
104 default y
105 help
106 Select this if your implementation has the Class II instruction l.fl1
107
108config OPENRISC_HAVE_INST_MUL
109 bool "Have instruction l.mul for hardware multiply"
110 default y
111 help
112 Select this if your implementation has a hardware multiply instruction
113
114config OPENRISC_HAVE_INST_DIV
115 bool "Have instruction l.div for hardware divide"
116 default y
117 help
118 Select this if your implementation has a hardware divide instruction
119
120config OPENRISC_HAVE_INST_CMOV
121 bool "Have instruction l.cmov for conditional move"
122 default n
123 help
124 This config enables gcc to generate l.cmov instructions when compiling
125 the kernel which in general will improve performance and reduce the
126 binary size.
127
128 Select this if your implementation has support for the Class II
129 l.cmov conistional move instruction.
130
131 Say N if you are unsure.
132
133config OPENRISC_HAVE_INST_ROR
134 bool "Have instruction l.ror for rotate right"
135 default n
136 help
137 This config enables gcc to generate l.ror instructions when compiling
138 the kernel which in general will improve performance and reduce the
139 binary size.
140
141 Select this if your implementation has support for the Class II
142 l.ror rotate right instruction.
143
144 Say N if you are unsure.
145
146config OPENRISC_HAVE_INST_RORI
147 bool "Have instruction l.rori for rotate right with immediate"
148 default n
149 help
150 This config enables gcc to generate l.rori instructions when compiling
151 the kernel which in general will improve performance and reduce the
152 binary size.
153
154 Select this if your implementation has support for the Class II
155 l.rori rotate right with immediate instruction.
156
157 Say N if you are unsure.
158
159config OPENRISC_HAVE_INST_SEXT
160 bool "Have instructions l.ext* for sign extension"
161 default n
162 help
163 This config enables gcc to generate l.ext* instructions when compiling
164 the kernel which in general will improve performance and reduce the
165 binary size.
166
167 Select this if your implementation has support for the Class II
168 l.exths, l.extbs, l.exthz and l.extbz size extend instructions.
169
170 Say N if you are unsure.
171
172endmenu
173
174config NR_CPUS
175 int "Maximum number of CPUs (2-32)"
176 range 2 32
177 depends on SMP
178 default "2"
179
180config SMP
181 bool "Symmetric Multi-Processing support"
182 help
183 This enables support for systems with more than one CPU. If you have
184 a system with only one CPU, say N. If you have a system with more
185 than one CPU, say Y.
186
187 If you don't know what to do here, say N.
188
189source "kernel/Kconfig.hz"
190
191config OPENRISC_NO_SPR_SR_DSX
192 bool "use SPR_SR_DSX software emulation" if OR1K_1200
193 default y
194 help
195 SPR_SR_DSX bit is status register bit indicating whether
196 the last exception has happened in delay slot.
197
198 OpenRISC architecture makes it optional to have it implemented
199 in hardware and the OR1200 does not have it.
200
201 Say N here if you know that your OpenRISC processor has
202 SPR_SR_DSX bit implemented. Say Y if you are unsure.
203
204config OPENRISC_HAVE_SHADOW_GPRS
205 bool "Support for shadow gpr files" if !SMP
206 default y if SMP
207 help
208 Say Y here if your OpenRISC processor features shadowed
209 register files. They will in such case be used as a
210 scratch reg storage on exception entry.
211
212 On SMP systems, this feature is mandatory.
213 On a unicore system it's safe to say N here if you are unsure.
214
215config CMDLINE
216 string "Default kernel command string"
217 default ""
218 help
219 On some architectures there is currently no way for the boot loader
220 to pass arguments to the kernel. For these architectures, you should
221 supply some command-line options at build time by entering them
222 here.
223
224menu "Debugging options"
225
226config JUMP_UPON_UNHANDLED_EXCEPTION
227 bool "Try to die gracefully"
228 default y
229 help
230 Now this puts kernel into infinite loop after first oops. Till
231 your kernel crashes this doesn't have any influence.
232
233 Say Y if you are unsure.
234
235config OPENRISC_ESR_EXCEPTION_BUG_CHECK
236 bool "Check for possible ESR exception bug"
237 default n
238 help
239 This option enables some checks that might expose some problems
240 in kernel.
241
242 Say N if you are unsure.
243
244endmenu
245
246endmenu
1# SPDX-License-Identifier: GPL-2.0
2#
3# For a description of the syntax of this configuration file,
4# see Documentation/kbuild/kconfig-language.rst.
5#
6
7config OPENRISC
8 def_bool y
9 select ARCH_32BIT_OFF_T
10 select ARCH_HAS_DMA_SET_UNCACHED
11 select ARCH_HAS_DMA_CLEAR_UNCACHED
12 select ARCH_HAS_SYNC_DMA_FOR_DEVICE
13 select COMMON_CLK
14 select OF
15 select OF_EARLY_FLATTREE
16 select IRQ_DOMAIN
17 select GPIOLIB
18 select HAVE_ARCH_TRACEHOOK
19 select SPARSE_IRQ
20 select GENERIC_IRQ_CHIP
21 select GENERIC_IRQ_PROBE
22 select GENERIC_IRQ_SHOW
23 select GENERIC_PCI_IOMAP
24 select GENERIC_IOREMAP
25 select GENERIC_CPU_DEVICES
26 select HAVE_PCI
27 select HAVE_UID16
28 select HAVE_PAGE_SIZE_8KB
29 select GENERIC_ATOMIC64
30 select GENERIC_CLOCKEVENTS_BROADCAST
31 select GENERIC_SMP_IDLE_THREAD
32 select MODULES_USE_ELF_RELA
33 select HAVE_DEBUG_STACKOVERFLOW
34 select OR1K_PIC
35 select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1
36 select ARCH_USE_QUEUED_RWLOCKS
37 select OMPIC if SMP
38 select PCI_DOMAINS_GENERIC if PCI
39 select PCI_MSI if PCI
40 select ARCH_WANT_FRAME_POINTERS
41 select GENERIC_IRQ_MULTI_HANDLER
42 select MMU_GATHER_NO_RANGE if MMU
43 select TRACE_IRQFLAGS_SUPPORT
44
45config CPU_BIG_ENDIAN
46 def_bool y
47
48config MMU
49 def_bool y
50
51config GENERIC_HWEIGHT
52 def_bool y
53
54config NO_IOPORT_MAP
55 def_bool y
56
57# For now, use generic checksum functions
58#These can be reimplemented in assembly later if so inclined
59config GENERIC_CSUM
60 def_bool y
61
62config STACKTRACE_SUPPORT
63 def_bool y
64
65config LOCKDEP_SUPPORT
66 def_bool y
67
68config FIX_EARLYCON_MEM
69 def_bool y
70
71menu "Processor type and features"
72
73choice
74 prompt "Subarchitecture"
75 default OR1K_1200
76
77config OR1K_1200
78 bool "OR1200"
79 help
80 Generic OpenRISC 1200 architecture
81
82endchoice
83
84config DCACHE_WRITETHROUGH
85 bool "Have write through data caches"
86 default n
87 help
88 Select this if your implementation features write through data caches.
89 Selecting 'N' here will allow the kernel to force flushing of data
90 caches at relevant times. Most OpenRISC implementations support write-
91 through data caches.
92
93 If unsure say N here
94
95config OPENRISC_BUILTIN_DTB
96 string "Builtin DTB"
97 default ""
98
99menu "Class II Instructions"
100
101config OPENRISC_HAVE_INST_FF1
102 bool "Have instruction l.ff1"
103 default y
104 help
105 Select this if your implementation has the Class II instruction l.ff1
106
107config OPENRISC_HAVE_INST_FL1
108 bool "Have instruction l.fl1"
109 default y
110 help
111 Select this if your implementation has the Class II instruction l.fl1
112
113config OPENRISC_HAVE_INST_MUL
114 bool "Have instruction l.mul for hardware multiply"
115 default y
116 help
117 Select this if your implementation has a hardware multiply instruction
118
119config OPENRISC_HAVE_INST_DIV
120 bool "Have instruction l.div for hardware divide"
121 default y
122 help
123 Select this if your implementation has a hardware divide instruction
124
125config OPENRISC_HAVE_INST_CMOV
126 bool "Have instruction l.cmov for conditional move"
127 default n
128 help
129 This config enables gcc to generate l.cmov instructions when compiling
130 the kernel which in general will improve performance and reduce the
131 binary size.
132
133 Select this if your implementation has support for the Class II
134 l.cmov conistional move instruction.
135
136 Say N if you are unsure.
137
138config OPENRISC_HAVE_INST_ROR
139 bool "Have instruction l.ror for rotate right"
140 default n
141 help
142 This config enables gcc to generate l.ror instructions when compiling
143 the kernel which in general will improve performance and reduce the
144 binary size.
145
146 Select this if your implementation has support for the Class II
147 l.ror rotate right instruction.
148
149 Say N if you are unsure.
150
151config OPENRISC_HAVE_INST_RORI
152 bool "Have instruction l.rori for rotate right with immediate"
153 default n
154 help
155 This config enables gcc to generate l.rori instructions when compiling
156 the kernel which in general will improve performance and reduce the
157 binary size.
158
159 Select this if your implementation has support for the Class II
160 l.rori rotate right with immediate instruction.
161
162 Say N if you are unsure.
163
164config OPENRISC_HAVE_INST_SEXT
165 bool "Have instructions l.ext* for sign extension"
166 default n
167 help
168 This config enables gcc to generate l.ext* instructions when compiling
169 the kernel which in general will improve performance and reduce the
170 binary size.
171
172 Select this if your implementation has support for the Class II
173 l.exths, l.extbs, l.exthz and l.extbz size extend instructions.
174
175 Say N if you are unsure.
176
177endmenu
178
179config NR_CPUS
180 int "Maximum number of CPUs (2-32)"
181 range 2 32
182 depends on SMP
183 default "2"
184
185config SMP
186 bool "Symmetric Multi-Processing support"
187 help
188 This enables support for systems with more than one CPU. If you have
189 a system with only one CPU, say N. If you have a system with more
190 than one CPU, say Y.
191
192 If you don't know what to do here, say N.
193
194config FPU
195 bool "FPU support"
196 default y
197 help
198 Say N here if you want to disable all floating-point related procedures
199 in the kernel and reduce binary size.
200
201 If you don't know what to do here, say Y.
202
203source "kernel/Kconfig.hz"
204
205config OPENRISC_NO_SPR_SR_DSX
206 bool "use SPR_SR_DSX software emulation" if OR1K_1200
207 default y
208 help
209 SPR_SR_DSX bit is status register bit indicating whether
210 the last exception has happened in delay slot.
211
212 OpenRISC architecture makes it optional to have it implemented
213 in hardware and the OR1200 does not have it.
214
215 Say N here if you know that your OpenRISC processor has
216 SPR_SR_DSX bit implemented. Say Y if you are unsure.
217
218config OPENRISC_HAVE_SHADOW_GPRS
219 bool "Support for shadow gpr files" if !SMP
220 default y if SMP
221 help
222 Say Y here if your OpenRISC processor features shadowed
223 register files. They will in such case be used as a
224 scratch reg storage on exception entry.
225
226 On SMP systems, this feature is mandatory.
227 On a unicore system it's safe to say N here if you are unsure.
228
229config CMDLINE
230 string "Default kernel command string"
231 default ""
232 help
233 On some architectures there is currently no way for the boot loader
234 to pass arguments to the kernel. For these architectures, you should
235 supply some command-line options at build time by entering them
236 here.
237
238menu "Debugging options"
239
240config JUMP_UPON_UNHANDLED_EXCEPTION
241 bool "Try to die gracefully"
242 default y
243 help
244 Now this puts kernel into infinite loop after first oops. Till
245 your kernel crashes this doesn't have any influence.
246
247 Say Y if you are unsure.
248
249config OPENRISC_ESR_EXCEPTION_BUG_CHECK
250 bool "Check for possible ESR exception bug"
251 default n
252 help
253 This option enables some checks that might expose some problems
254 in kernel.
255
256 Say N if you are unsure.
257
258endmenu
259
260endmenu