1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * pci.c -- basic PCI support code
  4 *
  5 * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
  6 */
  7
  8#include <linux/kernel.h>
  9#include <linux/types.h>
 10#include <linux/mm.h>
 11#include <linux/init.h>
 12#include <linux/pci.h>
 13
 14/*
 15 * From arch/i386/kernel/pci-i386.c:
 16 *
 17 * We need to avoid collisions with `mirrored' VGA ports
 18 * and other strange ISA hardware, so we always want the
 19 * addresses to be allocated in the 0x000-0x0ff region
 20 * modulo 0x400.
 21 *
 22 * Why? Because some silly external IO cards only decode
 23 * the low 10 bits of the IO address. The 0x00-0xff region
 24 * is reserved for motherboard devices that decode all 16
 25 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
 26 * but we want to try to avoid allocating at 0x2900-0x2bff
 27 * which might be mirrored at 0x0100-0x03ff..
 28 */
 29resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 30	resource_size_t size, resource_size_t align)
 31{
 32	resource_size_t start = res->start;
 33
 34	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
 35		start = (start + 0x3ff) & ~0x3ff;
 36
 37	start = (start + align - 1) & ~(align - 1);
 38
 39	return start;
 40}
 41
 42/*
 43 * This is taken from the ARM code for this.
 44 */
 45int pcibios_enable_device(struct pci_dev *dev, int mask)
 46{
 47	struct resource *r;
 48	u16 cmd, newcmd;
 49	int idx;
 50
 51	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 52	newcmd = cmd;
 53
 54	for (idx = 0; idx < 6; idx++) {
 55		/* Only set up the requested stuff */
 56		if (!(mask & (1 << idx)))
 57			continue;
 58
 59		r = dev->resource + idx;
 60		if (!r->start && r->end) {
 61			pr_err("PCI: Device %s not available because of resource collisions\n",
 62				pci_name(dev));
 63			return -EINVAL;
 64		}
 65		if (r->flags & IORESOURCE_IO)
 66			newcmd |= PCI_COMMAND_IO;
 67		if (r->flags & IORESOURCE_MEM)
 68			newcmd |= PCI_COMMAND_MEMORY;
 69	}
 70
 71	/*
 72	 * Bridges (eg, cardbus bridges) need to be fully enabled
 73	 */
 74	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
 75		newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
 76
 77
 78	if (newcmd != cmd) {
 79		pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
 80			pci_name(dev), cmd, newcmd);
 81		pci_write_config_word(dev, PCI_COMMAND, newcmd);
 82	}
 83	return 0;
 84}
 85
 86void pcibios_fixup_bus(struct pci_bus *bus)
 87{
 88	struct pci_dev *dev;
 89
 90	list_for_each_entry(dev, &bus->devices, bus_list) {
 91		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
 92		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
 93	}
 94}
 95
 96char *pcibios_setup(char *str)
 97{
 98	return str;
 99}
100

 1// SPDX-License-Identifier: GPL-2.0-or-later
 2/*
 3 * pci.c -- basic PCI support code
 4 *
 5 * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
 6 */
 7
 8#include <linux/kernel.h>
 9#include <linux/types.h>
10#include <linux/mm.h>
11#include <linux/init.h>
12#include <linux/pci.h>
13
14/*
15 * From arch/i386/kernel/pci-i386.c:
16 *
17 * We need to avoid collisions with `mirrored' VGA ports
18 * and other strange ISA hardware, so we always want the
19 * addresses to be allocated in the 0x000-0x0ff region
20 * modulo 0x400.
21 *
22 * Why? Because some silly external IO cards only decode
23 * the low 10 bits of the IO address. The 0x00-0xff region
24 * is reserved for motherboard devices that decode all 16
25 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
26 * but we want to try to avoid allocating at 0x2900-0x2bff
27 * which might be mirrored at 0x0100-0x03ff..
28 */
29resource_size_t pcibios_align_resource(void *data, const struct resource *res,
30	resource_size_t size, resource_size_t align)
31{
32	resource_size_t start = res->start;
33
34	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
35		start = (start + 0x3ff) & ~0x3ff;
36
37	start = (start + align - 1) & ~(align - 1);
38
39	return start;
40}
41
42/*
43 * This is taken from the ARM code for this.
44 */
45int pcibios_enable_device(struct pci_dev *dev, int mask)
46{
47	struct resource *r;
48	u16 cmd, newcmd;
49	int idx;
50
51	pci_read_config_word(dev, PCI_COMMAND, &cmd);
52	newcmd = cmd;
53
54	for (idx = 0; idx < 6; idx++) {
55		/* Only set up the requested stuff */
56		if (!(mask & (1 << idx)))
57			continue;
58
59		r = dev->resource + idx;
60		if (!r->start && r->end) {
61			pr_err("PCI: Device %s not available because of resource collisions\n",
62				pci_name(dev));
63			return -EINVAL;
64		}
65		if (r->flags & IORESOURCE_IO)
66			newcmd |= PCI_COMMAND_IO;
67		if (r->flags & IORESOURCE_MEM)
68			newcmd |= PCI_COMMAND_MEMORY;
69	}
70
71	/*
72	 * Bridges (eg, cardbus bridges) need to be fully enabled
73	 */
74	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
75		newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
76
77
78	if (newcmd != cmd) {
79		pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
80			pci_name(dev), cmd, newcmd);
81		pci_write_config_word(dev, PCI_COMMAND, newcmd);
82	}
83	return 0;
84}
85
86void pcibios_fixup_bus(struct pci_bus *bus)
87{
88	struct pci_dev *dev;
89
90	list_for_each_entry(dev, &bus->devices, bus_list) {
91		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
92		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
93	}
94}