Loading...
Note: File does not exist in v6.2.
1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-msm8974.dtsi"
3#include "pm8841.dtsi"
4#include "pm8941.dtsi"
5#include <dt-bindings/input/input.h>
6#include <dt-bindings/leds/common.h>
7#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8
9/ {
10 model = "Samsung Galaxy Note 3";
11 compatible = "samsung,hlte", "qcom,msm8974";
12 chassis-type = "handset";
13
14 aliases {
15 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
16 mmc1 = &sdhc_3; /* SDC3 SD card slot */
17 serial0 = &blsp1_uart1;
18 };
19
20 chosen {
21 stdout-path = "serial0:115200n8";
22 };
23
24 gpio-keys {
25 compatible = "gpio-keys";
26
27 pinctrl-0 = <&gpio_keys_pin_a>;
28 pinctrl-names = "default";
29
30 key-home {
31 label = "Home Key";
32 gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
33 linux,code = <KEY_HOMEPAGE>;
34 wakeup-source;
35 debounce-interval = <15>;
36 };
37
38 key-volume-down {
39 label = "Volume Down";
40 gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
41 linux,code = <KEY_VOLUMEDOWN>;
42 debounce-interval = <15>;
43 };
44
45 key-volume-up {
46 label = "Volume Up";
47 gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
48 linux,code = <KEY_VOLUMEUP>;
49 debounce-interval = <15>;
50 };
51 };
52
53 touch_ldo: regulator-touch {
54 compatible = "regulator-fixed";
55 regulator-name = "touch-ldo";
56
57 gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
58 enable-active-high;
59 regulator-boot-on;
60
61 pinctrl-0 = <&touch_ldo_pin>;
62 pinctrl-names = "default";
63 };
64};
65
66&blsp1_i2c2 {
67 status = "okay";
68
69 touchscreen@20 {
70 compatible = "syna,rmi4-i2c";
71 reg = <0x20>;
72
73 interrupt-parent = <&pm8941_gpios>;
74 interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
75
76 vdd-supply = <&pm8941_l10>;
77 vio-supply = <&touch_ldo>;
78
79 pinctrl-0 = <&touch_pin>;
80 pinctrl-names = "default";
81
82 syna,startup-delay-ms = <100>;
83
84 #address-cells = <1>;
85 #size-cells = <0>;
86
87 rmi4-f01@1 {
88 reg = <0x1>;
89 syna,nosleep-mode = <1>;
90 };
91
92 rmi4-f12@12 {
93 reg = <0x12>;
94 syna,sensor-type = <1>;
95 };
96 };
97};
98
99&blsp2_i2c6 {
100 status = "okay";
101
102 fuelgauge@36 {
103 compatible = "maxim,max17048";
104 reg = <0x36>;
105
106 maxim,double-soc;
107 maxim,rcomp = /bits/ 8 <0x56>;
108
109 interrupt-parent = <&pm8941_gpios>;
110 interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
111
112 pinctrl-0 = <&fuelgauge_pin>;
113 pinctrl-names = "default";
114 };
115};
116
117&blsp1_uart2 {
118 status = "okay";
119};
120
121&pm8941_gpios {
122 gpio_keys_pin_a: gpio-keys-active-state {
123 pins = "gpio2", "gpio3", "gpio5";
124 function = "normal";
125 bias-pull-up;
126 power-source = <PM8941_GPIO_S3>;
127 };
128
129 fuelgauge_pin: fuelgauge-int-state {
130 pins = "gpio26";
131 function = "normal";
132 bias-disable;
133 input-enable;
134 power-source = <PM8941_GPIO_S3>;
135 };
136
137 touch_pin: touchscreen-int-state {
138 pins = "gpio30";
139 function = "normal";
140 bias-disable;
141 input-enable;
142 power-source = <PM8941_GPIO_S3>;
143 };
144
145 touch_ldo_pin: touchscreen-ldo-state {
146 pins = "gpio9";
147 function = "normal";
148 output-high;
149 power-source = <PM8941_GPIO_S3>;
150 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
151 };
152};
153
154&remoteproc_adsp {
155 cx-supply = <&pm8841_s2>;
156 status = "okay";
157};
158
159&remoteproc_mss {
160 cx-supply = <&pm8841_s2>;
161 mss-supply = <&pm8841_s3>;
162 mx-supply = <&pm8841_s1>;
163 pll-supply = <&pm8941_l12>;
164 status = "okay";
165};
166
167&rpm_requests {
168 regulators-0 {
169 compatible = "qcom,rpm-pm8841-regulators";
170
171 pm8841_s1: s1 {
172 regulator-min-microvolt = <675000>;
173 regulator-max-microvolt = <1050000>;
174 };
175
176 pm8841_s2: s2 {
177 regulator-min-microvolt = <500000>;
178 regulator-max-microvolt = <1050000>;
179 };
180
181 pm8841_s3: s3 {
182 regulator-min-microvolt = <1050000>;
183 regulator-max-microvolt = <1050000>;
184 };
185
186 pm8841_s4: s4 {
187 regulator-min-microvolt = <815000>;
188 regulator-max-microvolt = <900000>;
189 };
190 };
191
192 regulators-1 {
193 compatible = "qcom,rpm-pm8941-regulators";
194
195 pm8941_s1: s1 {
196 regulator-min-microvolt = <1300000>;
197 regulator-max-microvolt = <1300000>;
198 regulator-always-on;
199 };
200
201 pm8941_s2: s2 {
202 regulator-min-microvolt = <2150000>;
203 regulator-max-microvolt = <2150000>;
204 };
205
206 pm8941_s3: s3 {
207 regulator-min-microvolt = <1800000>;
208 regulator-max-microvolt = <1800000>;
209 };
210
211 pm8941_l1: l1 {
212 regulator-min-microvolt = <1200000>;
213 regulator-max-microvolt = <1200000>;
214 };
215
216 pm8941_l2: l2 {
217 regulator-min-microvolt = <1200000>;
218 regulator-max-microvolt = <1200000>;
219 };
220
221 pm8941_l3: l3 {
222 regulator-min-microvolt = <1050000>;
223 regulator-max-microvolt = <1225000>;
224 };
225
226 pm8941_l4: l4 {
227 regulator-min-microvolt = <1225000>;
228 regulator-max-microvolt = <1225000>;
229 };
230
231 pm8941_l5: l5 {
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <1800000>;
234 };
235
236 pm8941_l6: l6 {
237 regulator-min-microvolt = <1800000>;
238 regulator-max-microvolt = <1800000>;
239 };
240
241 pm8941_l7: l7 {
242 regulator-min-microvolt = <1800000>;
243 regulator-max-microvolt = <1800000>;
244 };
245
246 pm8941_l8: l8 {
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <1800000>;
249 };
250
251 pm8941_l9: l9 {
252 regulator-min-microvolt = <1800000>;
253 regulator-max-microvolt = <2950000>;
254 };
255
256 pm8941_l10: l10 {
257 regulator-min-microvolt = <1800000>;
258 regulator-max-microvolt = <1800000>;
259 };
260
261 pm8941_l11: l11 {
262 regulator-min-microvolt = <1200000>;
263 regulator-max-microvolt = <1350000>;
264 };
265
266 pm8941_l12: l12 {
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
269 regulator-always-on;
270 };
271
272 pm8941_l13: l13 {
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <3300000>;
275 };
276
277 pm8941_l14: l14 {
278 regulator-min-microvolt = <1800000>;
279 regulator-max-microvolt = <1800000>;
280 };
281
282 pm8941_l15: l15 {
283 regulator-min-microvolt = <2050000>;
284 regulator-max-microvolt = <2050000>;
285 };
286
287 pm8941_l16: l16 {
288 regulator-min-microvolt = <2700000>;
289 regulator-max-microvolt = <2700000>;
290 };
291
292 pm8941_l17: l17 {
293 regulator-min-microvolt = <2850000>;
294 regulator-max-microvolt = <3000000>;
295 };
296
297 pm8941_l18: l18 {
298 regulator-min-microvolt = <2850000>;
299 regulator-max-microvolt = <2850000>;
300 };
301
302 pm8941_l19: l19 {
303 regulator-min-microvolt = <2900000>;
304 regulator-max-microvolt = <3350000>;
305 };
306
307 pm8941_l20: l20 {
308 regulator-min-microvolt = <2950000>;
309 regulator-max-microvolt = <2950000>;
310 regulator-system-load = <200000>;
311 regulator-allow-set-load;
312 };
313
314 pm8941_l21: l21 {
315 regulator-min-microvolt = <2950000>;
316 regulator-max-microvolt = <2950000>;
317 regulator-system-load = <200000>;
318 regulator-allow-set-load;
319 };
320
321 pm8941_l22: l22 {
322 regulator-min-microvolt = <2500000>;
323 regulator-max-microvolt = <3000000>;
324 };
325
326 pm8941_l23: l23 {
327 regulator-min-microvolt = <2400000>;
328 regulator-max-microvolt = <3300000>;
329 };
330
331 pm8941_l24: l24 {
332 regulator-min-microvolt = <3075000>;
333 regulator-max-microvolt = <3075000>;
334 };
335 };
336};
337
338&sdhc_1 {
339 vmmc-supply = <&pm8941_l20>;
340 vqmmc-supply = <&pm8941_s3>;
341
342 pinctrl-0 = <&sdhc1_pin_a>;
343 pinctrl-names = "default";
344
345 status = "okay";
346};
347
348&sdhc_3 {
349 max-frequency = <100000000>;
350
351 vmmc-supply = <&pm8941_l21>;
352 vqmmc-supply = <&pm8941_l21>;
353
354 pinctrl-0 = <&sdhc3_pin_a>;
355 pinctrl-names = "default";
356
357 status = "okay";
358};
359
360&tlmm {
361 sdhc1_pin_a: sdhc1-pin-active-state {
362 clk-pins {
363 pins = "sdc1_clk";
364 drive-strength = <4>;
365 bias-disable;
366 };
367
368 cmd-data-pins {
369 pins = "sdc1_cmd", "sdc1_data";
370 drive-strength = <4>;
371 bias-pull-up;
372 };
373 };
374
375 sdhc3_pin_a: sdhc3-pin-active-state {
376 pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
377 function = "sdc3";
378 drive-strength = <8>;
379 bias-disable;
380 };
381};
382
383&usb {
384 phys = <&usb_hs1_phy>;
385 phy-select = <&tcsr 0xb000 0>;
386
387 hnp-disable;
388 srp-disable;
389 adp-disable;
390
391 status = "okay";
392};
393
394&usb_hs1_phy {
395 v1p8-supply = <&pm8941_l6>;
396 v3p3-supply = <&pm8941_l24>;
397
398 qcom,init-seq = /bits/ 8 <0x1 0x64>;
399
400 status = "okay";
401};