Loading...
Note: File does not exist in v6.2.
1// SPDX-License-Identifier: GPL-2.0
2#include "qcom-ipq8064.dtsi"
3#include <dt-bindings/input/input.h>
4#include <dt-bindings/leds/common.h>
5
6/ {
7 model = "MikroTik RB3011UiAS-RM";
8 compatible = "mikrotik,rb3011", "qcom,ipq8064";
9
10 aliases {
11 serial0 = &gsbi7_serial;
12 ethernet0 = &gmac0;
13 ethernet1 = &gmac3;
14 mdio-gpio0 = &mdio0;
15 mdio-gpio1 = &mdio1;
16 };
17
18 chosen {
19 bootargs = "loglevel=8 console=ttyMSM0,115200";
20 stdout-path = "serial0:115200n8";
21 };
22
23 gpio-keys {
24 compatible = "gpio-keys";
25 pinctrl-0 = <&buttons_pins>;
26 pinctrl-names = "default";
27
28 button {
29 label = "reset";
30 linux,code = <KEY_RESTART>;
31 gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
32 linux,input-type = <1>;
33 debounce-interval = <60>;
34 };
35 };
36
37 leds {
38 compatible = "gpio-leds";
39 pinctrl-0 = <&leds_pins>;
40 pinctrl-names = "default";
41
42 led-0 {
43 label = "rb3011:green:user";
44 color = <LED_COLOR_ID_GREEN>;
45 gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
46 default-state = "off";
47 };
48 };
49
50 memory@42000000 {
51 reg = <0x42000000 0x3e000000>;
52 device_type = "memory";
53 };
54
55 mdio0: mdio-0 {
56 status = "okay";
57 compatible = "virtual,mdio-gpio";
58 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
59 <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
60 #address-cells = <1>;
61 #size-cells = <0>;
62
63 pinctrl-0 = <&mdio0_pins>;
64 pinctrl-names = "default";
65
66 switch0: switch@10 {
67 compatible = "qca,qca8337";
68
69 dsa,member = <0 0>;
70
71 pinctrl-0 = <&sw0_reset_pin>;
72 pinctrl-names = "default";
73
74 reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
75 reg = <0x10>;
76
77 ports {
78 #address-cells = <1>;
79 #size-cells = <0>;
80
81 switch0cpu: port@0 {
82 reg = <0>;
83 label = "cpu";
84 ethernet = <&gmac0>;
85 phy-mode = "rgmii-id";
86 fixed-link {
87 speed = <1000>;
88 full-duplex;
89 };
90 };
91
92 port@1 {
93 reg = <1>;
94 label = "sw1";
95
96 leds {
97 #address-cells = <1>;
98 #size-cells = <0>;
99
100 led@0 {
101 reg = <0>;
102 color = <LED_COLOR_ID_GREEN>;
103 function = LED_FUNCTION_LAN;
104 default-state = "keep";
105 };
106 };
107 };
108
109 port@2 {
110 reg = <2>;
111 label = "sw2";
112
113 leds {
114 #address-cells = <1>;
115 #size-cells = <0>;
116
117 led@0 {
118 reg = <0>;
119 color = <LED_COLOR_ID_GREEN>;
120 function = LED_FUNCTION_LAN;
121 default-state = "keep";
122 };
123 };
124 };
125
126 port@3 {
127 reg = <3>;
128 label = "sw3";
129
130 leds {
131 #address-cells = <1>;
132 #size-cells = <0>;
133
134 led@0 {
135 reg = <0>;
136 color = <LED_COLOR_ID_GREEN>;
137 function = LED_FUNCTION_LAN;
138 default-state = "keep";
139 };
140 };
141 };
142
143 port@4 {
144 reg = <4>;
145 label = "sw4";
146
147 leds {
148 #address-cells = <1>;
149 #size-cells = <0>;
150
151 led@0 {
152 reg = <0>;
153 color = <LED_COLOR_ID_GREEN>;
154 function = LED_FUNCTION_LAN;
155 default-state = "keep";
156 };
157 };
158 };
159
160 port@5 {
161 reg = <5>;
162 label = "sw5";
163
164 leds {
165 #address-cells = <1>;
166 #size-cells = <0>;
167
168 led@0 {
169 reg = <0>;
170 color = <LED_COLOR_ID_GREEN>;
171 function = LED_FUNCTION_LAN;
172 default-state = "keep";
173 };
174 };
175 };
176 };
177 };
178 };
179
180 mdio1: mdio-1 {
181 status = "okay";
182 compatible = "virtual,mdio-gpio";
183 gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
184 <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
185 #address-cells = <1>;
186 #size-cells = <0>;
187
188 pinctrl-0 = <&mdio1_pins>;
189 pinctrl-names = "default";
190
191 switch1: switch@14 {
192 compatible = "qca,qca8337";
193
194 dsa,member = <1 0>;
195
196 pinctrl-0 = <&sw1_reset_pin>;
197 pinctrl-names = "default";
198
199 reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
200 reg = <0x10>;
201
202 ports {
203 #address-cells = <1>;
204 #size-cells = <0>;
205
206 switch1cpu: port@0 {
207 reg = <0>;
208 label = "cpu";
209 ethernet = <&gmac3>;
210 phy-mode = "sgmii";
211 fixed-link {
212 speed = <1000>;
213 full-duplex;
214 };
215 };
216
217 port@1 {
218 reg = <1>;
219 label = "sw6";
220
221 leds {
222 #address-cells = <1>;
223 #size-cells = <0>;
224
225 led@0 {
226 reg = <0>;
227 color = <LED_COLOR_ID_GREEN>;
228 function = LED_FUNCTION_LAN;
229 default-state = "keep";
230 };
231 };
232 };
233
234 port@2 {
235 reg = <2>;
236 label = "sw7";
237
238 leds {
239 #address-cells = <1>;
240 #size-cells = <0>;
241
242 led@0 {
243 reg = <0>;
244 color = <LED_COLOR_ID_GREEN>;
245 function = LED_FUNCTION_LAN;
246 default-state = "keep";
247 };
248 };
249 };
250
251 port@3 {
252 reg = <3>;
253 label = "sw8";
254
255 leds {
256 #address-cells = <1>;
257 #size-cells = <0>;
258
259 led@0 {
260 reg = <0>;
261 color = <LED_COLOR_ID_GREEN>;
262 function = LED_FUNCTION_LAN;
263 default-state = "keep";
264 };
265 };
266 };
267
268 port@4 {
269 reg = <4>;
270 label = "sw9";
271
272 leds {
273 #address-cells = <1>;
274 #size-cells = <0>;
275
276 led@0 {
277 reg = <0>;
278 color = <LED_COLOR_ID_GREEN>;
279 function = LED_FUNCTION_LAN;
280 default-state = "keep";
281 };
282 };
283 };
284
285 port@5 {
286 reg = <5>;
287 label = "sw10";
288
289 leds {
290 #address-cells = <1>;
291 #size-cells = <0>;
292
293 led@0 {
294 reg = <0>;
295 color = <LED_COLOR_ID_GREEN>;
296 function = LED_FUNCTION_LAN;
297 default-state = "keep";
298 };
299 };
300 };
301 };
302 };
303 };
304
305 soc {
306 gsbi5: gsbi@1a200000 {
307 qcom,mode = <GSBI_PROT_SPI>;
308 status = "okay";
309
310 spi4: spi@1a280000 {
311 status = "okay";
312
313 pinctrl-0 = <&spi_pins>;
314 pinctrl-names = "default";
315
316 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
317
318 norflash: flash@0 {
319 compatible = "jedec,spi-nor";
320 #address-cells = <1>;
321 #size-cells = <1>;
322 spi-max-frequency = <50000000>;
323 reg = <0>;
324
325 partition@0 {
326 label = "RouterBoot";
327 reg = <0x0 0x40000>;
328 };
329 };
330 };
331 };
332 };
333};
334
335&adm_dma {
336 status = "okay";
337};
338
339&gmac0 {
340 status = "okay";
341
342 phy-mode = "rgmii";
343 qcom,id = <0>;
344 phy-handle = <&switch0cpu>;
345
346 fixed-link {
347 speed = <1000>;
348 full-duplex;
349 };
350};
351
352&gmac3 {
353 status = "okay";
354
355 phy-mode = "sgmii";
356 qcom,id = <3>;
357 phy-handle = <&switch1cpu>;
358
359 fixed-link {
360 speed = <1000>;
361 full-duplex;
362 };
363};
364
365&gsbi7 {
366 status = "okay";
367 qcom,mode = <GSBI_PROT_I2C_UART>;
368};
369
370&gsbi7_serial {
371 status = "okay";
372};
373
374&hs_phy_1 {
375 status = "okay";
376};
377
378&nand {
379 status = "okay";
380
381 nand@0 {
382 reg = <0>;
383
384 nand-ecc-strength = <4>;
385 nand-bus-width = <8>;
386 nand-ecc-step-size = <512>;
387
388 partitions {
389 compatible = "fixed-partitions";
390 #address-cells = <1>;
391 #size-cells = <1>;
392
393 boot@0 {
394 label = "RouterBoard NAND 1 Boot";
395 reg = <0x0000000 0x0800000>;
396 };
397
398 main@800000 {
399 label = "RouterBoard NAND 1 Main";
400 reg = <0x0800000 0x7800000>;
401 };
402 };
403 };
404};
405
406&qcom_pinmux {
407 buttons_pins: buttons-state {
408 pins = "gpio66";
409 function = "gpio";
410 drive-strength = <16>;
411 bias-disable;
412 };
413
414 leds_pins: leds-state {
415 pins = "gpio33";
416 function = "gpio";
417 drive-strength = <16>;
418 bias-disable;
419 };
420
421 mdio1_pins: mdio1-state {
422 pins = "gpio10", "gpio11";
423 function = "gpio";
424 drive-strength = <8>;
425 bias-disable;
426 };
427
428 sw0_reset_pin: sw0-reset-state {
429 pins = "gpio16";
430 drive-strength = <16>;
431 function = "gpio";
432 bias-disable;
433 input-disable;
434 };
435
436 sw1_reset_pin: sw1-reset-state {
437 pins = "gpio17";
438 drive-strength = <16>;
439 function = "gpio";
440 bias-disable;
441 input-disable;
442 };
443
444 usb1_pwr_en_pins: usb1-pwr-en-state {
445 pins = "gpio4";
446 function = "gpio";
447 drive-strength = <16>;
448 bias-disable;
449 output-high;
450 };
451};
452
453&ss_phy_1 {
454 status = "okay";
455};
456
457&usb3_1 {
458 pinctrl-0 = <&usb1_pwr_en_pins>;
459 pinctrl-names = "default";
460
461 status = "okay";
462};