1// SPDX-License-Identifier: GPL-2.0
  2#include <dt-bindings/iio/qcom,spmi-vadc.h>
  3#include <dt-bindings/input/linux-event-codes.h>
  4#include <dt-bindings/interrupt-controller/irq.h>
  5#include <dt-bindings/spmi/spmi.h>
  6
  7&spmi_bus {
  8
  9	pma8084_0: pma8084@0 {
 10		compatible = "qcom,pma8084", "qcom,spmi-pmic";
 11		reg = <0x0 SPMI_USID>;
 12		#address-cells = <1>;
 13		#size-cells = <0>;
 14
 15		rtc@6000 {
 16			compatible = "qcom,pm8941-rtc";
 17			reg = <0x6000>,
 18			      <0x6100>;
 19			reg-names = "rtc", "alarm";
 20			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 21		};
 22
 23		pon@800 {
 24			compatible = "qcom,pm8941-pon";
 25			reg = <0x800>;
 26
 27			pwrkey {
 28				compatible = "qcom,pm8941-pwrkey";
 29				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 30				debounce = <15625>;
 31				bias-pull-up;
 32				linux,code = <KEY_POWER>;
 33			};
 34		};
 35
 36		pma8084_gpios: gpio@c000 {
 37			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 38			reg = <0xc000>;
 39			gpio-controller;
 40			gpio-ranges = <&pma8084_gpios 0 0 22>;
 41			#gpio-cells = <2>;
 42			interrupt-controller;
 43			#interrupt-cells = <2>;
 44		};
 45
 46		pma8084_mpps: mpps@a000 {
 47			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
 48			reg = <0xa000>;
 49			gpio-controller;
 50			#gpio-cells = <2>;
 51			gpio-ranges = <&pma8084_mpps 0 0 8>;
 52			interrupt-controller;
 53			#interrupt-cells = <2>;
 54		};
 55
 56		pma8084_temp: temp-alarm@2400 {
 57			compatible = "qcom,spmi-temp-alarm";
 58			reg = <0x2400>;
 59			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 60			#thermal-sensor-cells = <0>;
 61			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
 62			io-channel-names = "thermal";
 63		};
 64
 65		pma8084_vadc: adc@3100 {
 66			compatible = "qcom,spmi-vadc";
 67			reg = <0x3100>;
 68			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 69			#address-cells = <1>;
 70			#size-cells = <0>;
 71			#io-channel-cells = <1>;
 72
 73			channel@8 {
 74				reg = <VADC_DIE_TEMP>;
 75			};
 76
 77			channel@9 {
 78				reg = <VADC_REF_625MV>;
 79			};
 80
 81			channel@a {
 82				reg = <VADC_REF_1250MV>;
 83			};
 84
 85			channel@c {
 86				reg = <VADC_SPARE1>;
 87			};
 88
 89			channel@e {
 90				reg = <VADC_GND_REF>;
 91			};
 92
 93			channel@f {
 94				reg = <VADC_VDD_VADC>;
 95			};
 96		};
 97	};
 98
 99	pma8084_1: pma8084@1 {
100		compatible = "qcom,pma8084", "qcom,spmi-pmic";
101		reg = <0x1 SPMI_USID>;
102		#address-cells = <1>;
103		#size-cells = <0>;
104	};
105};