1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
  4 */
  5
  6/dts-v1/;
  7#include "at91-sama5d4_ma5d4.dtsi"
  8
  9/ {
 10	model = "Aries/DENX MA5D4EVK";
 11	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
 12
 13	chosen {
 14		stdout-path = "serial3:115200n8";
 15	};
 16
 17	ahb {
 18		usb0: gadget@400000 {
 19			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 20			pinctrl-names = "default";
 21			pinctrl-0 = <&pinctrl_usba_vbus>;
 22			status = "okay";
 23		};
 24
 25		usb1: ohci@500000 {
 26			num-ports = <3>;
 27			atmel,vbus-gpio = <0
 28					   &pioE 11 GPIO_ACTIVE_LOW
 29					   &pioE 14 GPIO_ACTIVE_LOW
 30					  >;
 31			status = "okay";
 32		};
 33
 34		usb2: ehci@600000 {
 35			status = "okay";
 36		};
 37
 38		apb {
 39			hlcdc: hlcdc@f0000000 {
 40				status = "okay";
 41
 42				hlcdc-display-controller {
 43					pinctrl-names = "default";
 44					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
 45
 46					port@0 {
 47						hlcdc_panel_output: endpoint@0 {
 48							reg = <0>;
 49							remote-endpoint = <&panel_input>;
 50						};
 51					};
 52				};
 53
 54			};
 55
 56			macb0: ethernet@f8020000 {
 57				phy-mode = "rmii";
 58				status = "okay";
 59
 60				phy0: ethernet-phy@0 {
 61					reg = <0>;
 62				};
 63			};
 64
 65			usart0: serial@f802c000 {
 66				status = "okay";
 67			};
 68
 69			usart1: serial@f8030000 {
 70				status = "okay";
 71			};
 72
 73			mmc1: mmc@fc000000 {
 74				pinctrl-names = "default";
 75				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
 76				vmmc-supply = <&vcc_mmc1_reg>;
 77				vqmmc-supply = <&vcc_3v3_reg>;
 78				status = "okay";
 79				slot@0 {
 80					reg = <0>;
 81					bus-width = <4>;
 82					cd-gpios = <&pioE 5 0>;
 83				};
 84			};
 85
 86			adc0: adc@fc034000 {
 87				atmel,adc-ts-wires = <4>;
 88				atmel,adc-ts-pressure-threshold = <10000>;
 89			};
 90
 91
 92			pinctrl@fc06a000 {
 93				board {
 94					pinctrl_mmc1_cd: mmc1_cd {
 95						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 96					};
 97					pinctrl_usba_vbus: usba_vbus {
 98						atmel,pins =
 99							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
100					};
101				};
102			};
103		};
104	};
105
106	backlight: backlight {
107		compatible = "pwm-backlight";
108		pwms = <&hlcdc_pwm 0 50000 0>;
109		brightness-levels = <0 4 8 16 32 64 128 255>;
110		default-brightness-level = <6>;
111		status = "okay";
112	};
113
114	leds {
115		compatible = "gpio-leds";
116		status = "okay";
117
118		led-user1 {
119			label = "user1";
120			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
121			linux,default-trigger = "heartbeat";
122		};
123
124		led-user2 {
125			label = "user2";
126			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
127			linux,default-trigger = "heartbeat";
128		};
129
130		led-user3 {
131			label = "user3";
132			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
133			linux,default-trigger = "heartbeat";
134		};
135	};
136
137	panel: panel {
138		/* Actually Ampire 800480R2 */
139		compatible = "foxlink,fl500wvr00-a0t";
140		backlight = <&backlight>;
141		#address-cells = <1>;
142		#size-cells = <0>;
143		status = "okay";
144
145		port@0 {
146			#address-cells = <1>;
147			#size-cells = <0>;
148
149			panel_input: endpoint@0 {
150				reg = <0>;
151				remote-endpoint = <&hlcdc_panel_output>;
152			};
153		};
154	};
155
156	vcc_mmc1_reg: fixedregulator_mmc1 {
157		compatible = "regulator-fixed";
158		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
159		regulator-name = "VDD MCI1";
160		regulator-min-microvolt = <3300000>;
161		regulator-max-microvolt = <3300000>;
162		vin-supply = <&vcc_3v3_reg>;
163	};
164};