Linux Audio

Check our new training course

Loading...
v6.2
  1// SPDX-License-Identifier: GPL-2.0+
  2/*
  3 * Read-Copy Update mechanism for mutual exclusion
  4 *
  5 * Copyright IBM Corporation, 2001
  6 *
  7 * Authors: Dipankar Sarma <dipankar@in.ibm.com>
  8 *	    Manfred Spraul <manfred@colorfullife.com>
  9 *
 10 * Based on the original work by Paul McKenney <paulmck@linux.ibm.com>
 11 * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
 12 * Papers:
 13 * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
 14 * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
 15 *
 16 * For detailed explanation of Read-Copy Update mechanism see -
 17 *		http://lse.sourceforge.net/locking/rcupdate.html
 18 *
 19 */
 20#include <linux/types.h>
 21#include <linux/kernel.h>
 22#include <linux/init.h>
 23#include <linux/spinlock.h>
 24#include <linux/smp.h>
 25#include <linux/interrupt.h>
 26#include <linux/sched/signal.h>
 27#include <linux/sched/debug.h>
 
 28#include <linux/atomic.h>
 29#include <linux/bitops.h>
 30#include <linux/percpu.h>
 31#include <linux/notifier.h>
 32#include <linux/cpu.h>
 33#include <linux/mutex.h>
 34#include <linux/export.h>
 35#include <linux/hardirq.h>
 36#include <linux/delay.h>
 37#include <linux/moduleparam.h>
 38#include <linux/kthread.h>
 39#include <linux/tick.h>
 40#include <linux/rcupdate_wait.h>
 41#include <linux/sched/isolation.h>
 42#include <linux/kprobes.h>
 43#include <linux/slab.h>
 44#include <linux/irq_work.h>
 45#include <linux/rcupdate_trace.h>
 46
 47#define CREATE_TRACE_POINTS
 48
 49#include "rcu.h"
 50
 51#ifdef MODULE_PARAM_PREFIX
 52#undef MODULE_PARAM_PREFIX
 53#endif
 54#define MODULE_PARAM_PREFIX "rcupdate."
 55
 56#ifndef CONFIG_TINY_RCU
 57module_param(rcu_expedited, int, 0444);
 58module_param(rcu_normal, int, 0444);
 59static int rcu_normal_after_boot = IS_ENABLED(CONFIG_PREEMPT_RT);
 60#if !defined(CONFIG_PREEMPT_RT) || defined(CONFIG_NO_HZ_FULL)
 61module_param(rcu_normal_after_boot, int, 0444);
 62#endif
 63#endif /* #ifndef CONFIG_TINY_RCU */
 64
 65#ifdef CONFIG_DEBUG_LOCK_ALLOC
 66/**
 67 * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section?
 68 * @ret:	Best guess answer if lockdep cannot be relied on
 69 *
 70 * Returns true if lockdep must be ignored, in which case ``*ret`` contains
 71 * the best guess described below.  Otherwise returns false, in which
 72 * case ``*ret`` tells the caller nothing and the caller should instead
 73 * consult lockdep.
 74 *
 75 * If CONFIG_DEBUG_LOCK_ALLOC is selected, set ``*ret`` to nonzero iff in an
 76 * RCU-sched read-side critical section.  In absence of
 77 * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
 78 * critical section unless it can prove otherwise.  Note that disabling
 79 * of preemption (including disabling irqs) counts as an RCU-sched
 80 * read-side critical section.  This is useful for debug checks in functions
 81 * that required that they be called within an RCU-sched read-side
 82 * critical section.
 83 *
 84 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
 85 * and while lockdep is disabled.
 86 *
 87 * Note that if the CPU is in the idle loop from an RCU point of view (ie:
 88 * that we are in the section between ct_idle_enter() and ct_idle_exit())
 89 * then rcu_read_lock_held() sets ``*ret`` to false even if the CPU did an
 90 * rcu_read_lock().  The reason for this is that RCU ignores CPUs that are
 91 * in such a section, considering these as in extended quiescent state,
 92 * so such a CPU is effectively never in an RCU read-side critical section
 93 * regardless of what RCU primitives it invokes.  This state of affairs is
 94 * required --- we need to keep an RCU-free window in idle where the CPU may
 95 * possibly enter into low power mode. This way we can notice an extended
 96 * quiescent state to other CPUs that started a grace period. Otherwise
 97 * we would delay any grace period as long as we run in the idle task.
 98 *
 99 * Similarly, we avoid claiming an RCU read lock held if the current
100 * CPU is offline.
101 */
102static bool rcu_read_lock_held_common(bool *ret)
103{
104	if (!debug_lockdep_rcu_enabled()) {
105		*ret = true;
106		return true;
107	}
108	if (!rcu_is_watching()) {
109		*ret = false;
110		return true;
111	}
112	if (!rcu_lockdep_current_cpu_online()) {
113		*ret = false;
114		return true;
115	}
116	return false;
117}
118
119int rcu_read_lock_sched_held(void)
120{
121	bool ret;
122
123	if (rcu_read_lock_held_common(&ret))
124		return ret;
125	return lock_is_held(&rcu_sched_lock_map) || !preemptible();
126}
127EXPORT_SYMBOL(rcu_read_lock_sched_held);
128#endif
129
130#ifndef CONFIG_TINY_RCU
131
132/*
133 * Should expedited grace-period primitives always fall back to their
134 * non-expedited counterparts?  Intended for use within RCU.  Note
135 * that if the user specifies both rcu_expedited and rcu_normal, then
136 * rcu_normal wins.  (Except during the time period during boot from
137 * when the first task is spawned until the rcu_set_runtime_mode()
138 * core_initcall() is invoked, at which point everything is expedited.)
139 */
140bool rcu_gp_is_normal(void)
141{
142	return READ_ONCE(rcu_normal) &&
143	       rcu_scheduler_active != RCU_SCHEDULER_INIT;
144}
145EXPORT_SYMBOL_GPL(rcu_gp_is_normal);
146
147static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);
 
 
 
 
 
 
 
 
 
 
148
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
149/*
150 * Should normal grace-period primitives be expedited?  Intended for
151 * use within RCU.  Note that this function takes the rcu_expedited
152 * sysfs/boot variable and rcu_scheduler_active into account as well
153 * as the rcu_expedite_gp() nesting.  So looping on rcu_unexpedite_gp()
154 * until rcu_gp_is_expedited() returns false is a -really- bad idea.
155 */
156bool rcu_gp_is_expedited(void)
157{
158	return rcu_expedited || atomic_read(&rcu_expedited_nesting);
159}
160EXPORT_SYMBOL_GPL(rcu_gp_is_expedited);
161
162/**
163 * rcu_expedite_gp - Expedite future RCU grace periods
164 *
165 * After a call to this function, future calls to synchronize_rcu() and
166 * friends act as the corresponding synchronize_rcu_expedited() function
167 * had instead been called.
168 */
169void rcu_expedite_gp(void)
170{
171	atomic_inc(&rcu_expedited_nesting);
172}
173EXPORT_SYMBOL_GPL(rcu_expedite_gp);
174
175/**
176 * rcu_unexpedite_gp - Cancel prior rcu_expedite_gp() invocation
177 *
178 * Undo a prior call to rcu_expedite_gp().  If all prior calls to
179 * rcu_expedite_gp() are undone by a subsequent call to rcu_unexpedite_gp(),
180 * and if the rcu_expedited sysfs/boot parameter is not set, then all
181 * subsequent calls to synchronize_rcu() and friends will return to
182 * their normal non-expedited behavior.
183 */
184void rcu_unexpedite_gp(void)
185{
186	atomic_dec(&rcu_expedited_nesting);
187}
188EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);
189
190static bool rcu_boot_ended __read_mostly;
191
192/*
193 * Inform RCU of the end of the in-kernel boot sequence.
194 */
195void rcu_end_inkernel_boot(void)
196{
197	rcu_unexpedite_gp();
 
198	if (rcu_normal_after_boot)
199		WRITE_ONCE(rcu_normal, 1);
200	rcu_boot_ended = true;
201}
202
203/*
204 * Let rcutorture know when it is OK to turn it up to eleven.
205 */
206bool rcu_inkernel_boot_has_ended(void)
207{
208	return rcu_boot_ended;
209}
210EXPORT_SYMBOL_GPL(rcu_inkernel_boot_has_ended);
211
212#endif /* #ifndef CONFIG_TINY_RCU */
213
214/*
215 * Test each non-SRCU synchronous grace-period wait API.  This is
216 * useful just after a change in mode for these primitives, and
217 * during early boot.
218 */
219void rcu_test_sync_prims(void)
220{
221	if (!IS_ENABLED(CONFIG_PROVE_RCU))
222		return;
 
223	synchronize_rcu();
224	synchronize_rcu_expedited();
225}
226
227#if !defined(CONFIG_TINY_RCU)
228
229/*
230 * Switch to run-time mode once RCU has fully initialized.
231 */
232static int __init rcu_set_runtime_mode(void)
233{
234	rcu_test_sync_prims();
235	rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
236	kfree_rcu_scheduler_running();
237	rcu_test_sync_prims();
238	return 0;
239}
240core_initcall(rcu_set_runtime_mode);
241
242#endif /* #if !defined(CONFIG_TINY_RCU) */
243
244#ifdef CONFIG_DEBUG_LOCK_ALLOC
245static struct lock_class_key rcu_lock_key;
246struct lockdep_map rcu_lock_map = {
247	.name = "rcu_read_lock",
248	.key = &rcu_lock_key,
249	.wait_type_outer = LD_WAIT_FREE,
250	.wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT implies PREEMPT_RCU */
251};
252EXPORT_SYMBOL_GPL(rcu_lock_map);
253
254static struct lock_class_key rcu_bh_lock_key;
255struct lockdep_map rcu_bh_lock_map = {
256	.name = "rcu_read_lock_bh",
257	.key = &rcu_bh_lock_key,
258	.wait_type_outer = LD_WAIT_FREE,
259	.wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT makes BH preemptible. */
260};
261EXPORT_SYMBOL_GPL(rcu_bh_lock_map);
262
263static struct lock_class_key rcu_sched_lock_key;
264struct lockdep_map rcu_sched_lock_map = {
265	.name = "rcu_read_lock_sched",
266	.key = &rcu_sched_lock_key,
267	.wait_type_outer = LD_WAIT_FREE,
268	.wait_type_inner = LD_WAIT_SPIN,
269};
270EXPORT_SYMBOL_GPL(rcu_sched_lock_map);
271
272// Tell lockdep when RCU callbacks are being invoked.
273static struct lock_class_key rcu_callback_key;
274struct lockdep_map rcu_callback_map =
275	STATIC_LOCKDEP_MAP_INIT("rcu_callback", &rcu_callback_key);
276EXPORT_SYMBOL_GPL(rcu_callback_map);
277
278noinstr int notrace debug_lockdep_rcu_enabled(void)
279{
280	return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && READ_ONCE(debug_locks) &&
281	       current->lockdep_recursion == 0;
282}
283EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
284
285/**
286 * rcu_read_lock_held() - might we be in RCU read-side critical section?
287 *
288 * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
289 * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
290 * this assumes we are in an RCU read-side critical section unless it can
291 * prove otherwise.  This is useful for debug checks in functions that
292 * require that they be called within an RCU read-side critical section.
293 *
294 * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
295 * and while lockdep is disabled.
296 *
297 * Note that rcu_read_lock() and the matching rcu_read_unlock() must
298 * occur in the same context, for example, it is illegal to invoke
299 * rcu_read_unlock() in process context if the matching rcu_read_lock()
300 * was invoked from within an irq handler.
301 *
302 * Note that rcu_read_lock() is disallowed if the CPU is either idle or
303 * offline from an RCU perspective, so check for those as well.
304 */
305int rcu_read_lock_held(void)
306{
307	bool ret;
308
309	if (rcu_read_lock_held_common(&ret))
310		return ret;
311	return lock_is_held(&rcu_lock_map);
312}
313EXPORT_SYMBOL_GPL(rcu_read_lock_held);
314
315/**
316 * rcu_read_lock_bh_held() - might we be in RCU-bh read-side critical section?
317 *
318 * Check for bottom half being disabled, which covers both the
319 * CONFIG_PROVE_RCU and not cases.  Note that if someone uses
320 * rcu_read_lock_bh(), but then later enables BH, lockdep (if enabled)
321 * will show the situation.  This is useful for debug checks in functions
322 * that require that they be called within an RCU read-side critical
323 * section.
324 *
325 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot.
326 *
327 * Note that rcu_read_lock_bh() is disallowed if the CPU is either idle or
328 * offline from an RCU perspective, so check for those as well.
329 */
330int rcu_read_lock_bh_held(void)
331{
332	bool ret;
333
334	if (rcu_read_lock_held_common(&ret))
335		return ret;
336	return in_softirq() || irqs_disabled();
337}
338EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
339
340int rcu_read_lock_any_held(void)
341{
342	bool ret;
343
344	if (rcu_read_lock_held_common(&ret))
345		return ret;
346	if (lock_is_held(&rcu_lock_map) ||
347	    lock_is_held(&rcu_bh_lock_map) ||
348	    lock_is_held(&rcu_sched_lock_map))
349		return 1;
350	return !preemptible();
351}
352EXPORT_SYMBOL_GPL(rcu_read_lock_any_held);
353
354#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
355
356/**
357 * wakeme_after_rcu() - Callback function to awaken a task after grace period
358 * @head: Pointer to rcu_head member within rcu_synchronize structure
359 *
360 * Awaken the corresponding task now that a grace period has elapsed.
361 */
362void wakeme_after_rcu(struct rcu_head *head)
363{
364	struct rcu_synchronize *rcu;
365
366	rcu = container_of(head, struct rcu_synchronize, head);
367	complete(&rcu->completion);
368}
369EXPORT_SYMBOL_GPL(wakeme_after_rcu);
370
371void __wait_rcu_gp(bool checktiny, int n, call_rcu_func_t *crcu_array,
372		   struct rcu_synchronize *rs_array)
373{
374	int i;
375	int j;
376
377	/* Initialize and register callbacks for each crcu_array element. */
378	for (i = 0; i < n; i++) {
379		if (checktiny &&
380		    (crcu_array[i] == call_rcu)) {
381			might_sleep();
382			continue;
383		}
384		for (j = 0; j < i; j++)
385			if (crcu_array[j] == crcu_array[i])
386				break;
387		if (j == i) {
388			init_rcu_head_on_stack(&rs_array[i].head);
389			init_completion(&rs_array[i].completion);
390			(crcu_array[i])(&rs_array[i].head, wakeme_after_rcu);
391		}
392	}
393
394	/* Wait for all callbacks to be invoked. */
395	for (i = 0; i < n; i++) {
396		if (checktiny &&
397		    (crcu_array[i] == call_rcu))
398			continue;
399		for (j = 0; j < i; j++)
400			if (crcu_array[j] == crcu_array[i])
401				break;
402		if (j == i) {
403			wait_for_completion(&rs_array[i].completion);
404			destroy_rcu_head_on_stack(&rs_array[i].head);
405		}
406	}
407}
408EXPORT_SYMBOL_GPL(__wait_rcu_gp);
409
410void finish_rcuwait(struct rcuwait *w)
411{
412	rcu_assign_pointer(w->task, NULL);
413	__set_current_state(TASK_RUNNING);
414}
415EXPORT_SYMBOL_GPL(finish_rcuwait);
416
417#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
418void init_rcu_head(struct rcu_head *head)
419{
420	debug_object_init(head, &rcuhead_debug_descr);
421}
422EXPORT_SYMBOL_GPL(init_rcu_head);
423
424void destroy_rcu_head(struct rcu_head *head)
425{
426	debug_object_free(head, &rcuhead_debug_descr);
427}
428EXPORT_SYMBOL_GPL(destroy_rcu_head);
429
430static bool rcuhead_is_static_object(void *addr)
431{
432	return true;
433}
434
435/**
436 * init_rcu_head_on_stack() - initialize on-stack rcu_head for debugobjects
437 * @head: pointer to rcu_head structure to be initialized
438 *
439 * This function informs debugobjects of a new rcu_head structure that
440 * has been allocated as an auto variable on the stack.  This function
441 * is not required for rcu_head structures that are statically defined or
442 * that are dynamically allocated on the heap.  This function has no
443 * effect for !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
444 */
445void init_rcu_head_on_stack(struct rcu_head *head)
446{
447	debug_object_init_on_stack(head, &rcuhead_debug_descr);
448}
449EXPORT_SYMBOL_GPL(init_rcu_head_on_stack);
450
451/**
452 * destroy_rcu_head_on_stack() - destroy on-stack rcu_head for debugobjects
453 * @head: pointer to rcu_head structure to be initialized
454 *
455 * This function informs debugobjects that an on-stack rcu_head structure
456 * is about to go out of scope.  As with init_rcu_head_on_stack(), this
457 * function is not required for rcu_head structures that are statically
458 * defined or that are dynamically allocated on the heap.  Also as with
459 * init_rcu_head_on_stack(), this function has no effect for
460 * !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
461 */
462void destroy_rcu_head_on_stack(struct rcu_head *head)
463{
464	debug_object_free(head, &rcuhead_debug_descr);
465}
466EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack);
467
468const struct debug_obj_descr rcuhead_debug_descr = {
469	.name = "rcu_head",
470	.is_static_object = rcuhead_is_static_object,
471};
472EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
473#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
474
475#if defined(CONFIG_TREE_RCU) || defined(CONFIG_RCU_TRACE)
476void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
477			       unsigned long secs,
478			       unsigned long c_old, unsigned long c)
479{
480	trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c);
481}
482EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read);
483#else
484#define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
485	do { } while (0)
486#endif
487
488#if IS_ENABLED(CONFIG_RCU_TORTURE_TEST) || IS_MODULE(CONFIG_RCU_TORTURE_TEST)
489/* Get rcutorture access to sched_setaffinity(). */
490long rcutorture_sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
491{
492	int ret;
493
494	ret = sched_setaffinity(pid, in_mask);
495	WARN_ONCE(ret, "%s: sched_setaffinity() returned %d\n", __func__, ret);
496	return ret;
497}
498EXPORT_SYMBOL_GPL(rcutorture_sched_setaffinity);
499#endif
500
 
 
 
501#ifdef CONFIG_RCU_STALL_COMMON
502int rcu_cpu_stall_ftrace_dump __read_mostly;
503module_param(rcu_cpu_stall_ftrace_dump, int, 0644);
 
 
 
504int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings.
505EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress);
506module_param(rcu_cpu_stall_suppress, int, 0644);
507int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
508module_param(rcu_cpu_stall_timeout, int, 0644);
509int rcu_exp_cpu_stall_timeout __read_mostly = CONFIG_RCU_EXP_CPU_STALL_TIMEOUT;
510module_param(rcu_exp_cpu_stall_timeout, int, 0644);
 
 
 
 
511#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
512
513// Suppress boot-time RCU CPU stall warnings and rcutorture writer stall
514// warnings.  Also used by rcutorture even if stall warnings are excluded.
515int rcu_cpu_stall_suppress_at_boot __read_mostly; // !0 = suppress boot stalls.
516EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_at_boot);
517module_param(rcu_cpu_stall_suppress_at_boot, int, 0444);
518
519/**
520 * get_completed_synchronize_rcu - Return a pre-completed polled state cookie
521 *
522 * Returns a value that will always be treated by functions like
523 * poll_state_synchronize_rcu() as a cookie whose grace period has already
524 * completed.
525 */
526unsigned long get_completed_synchronize_rcu(void)
527{
528	return RCU_GET_STATE_COMPLETED;
529}
530EXPORT_SYMBOL_GPL(get_completed_synchronize_rcu);
531
532#ifdef CONFIG_PROVE_RCU
533
534/*
535 * Early boot self test parameters.
536 */
537static bool rcu_self_test;
538module_param(rcu_self_test, bool, 0444);
539
540static int rcu_self_test_counter;
541
542static void test_callback(struct rcu_head *r)
543{
544	rcu_self_test_counter++;
545	pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
546}
547
548DEFINE_STATIC_SRCU(early_srcu);
549static unsigned long early_srcu_cookie;
550
551struct early_boot_kfree_rcu {
552	struct rcu_head rh;
553};
554
555static void early_boot_test_call_rcu(void)
556{
557	static struct rcu_head head;
 
558	static struct rcu_head shead;
559	struct early_boot_kfree_rcu *rhp;
560
 
 
561	call_rcu(&head, test_callback);
562	early_srcu_cookie = start_poll_synchronize_srcu(&early_srcu);
563	call_srcu(&early_srcu, &shead, test_callback);
564	rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
565	if (!WARN_ON_ONCE(!rhp))
566		kfree_rcu(rhp, rh);
567}
568
569void rcu_early_boot_tests(void)
570{
571	pr_info("Running RCU self tests\n");
572
573	if (rcu_self_test)
574		early_boot_test_call_rcu();
575	rcu_test_sync_prims();
576}
577
578static int rcu_verify_early_boot_tests(void)
579{
580	int ret = 0;
581	int early_boot_test_counter = 0;
582
583	if (rcu_self_test) {
584		early_boot_test_counter++;
585		rcu_barrier();
586		early_boot_test_counter++;
587		srcu_barrier(&early_srcu);
588		WARN_ON_ONCE(!poll_state_synchronize_srcu(&early_srcu, early_srcu_cookie));
 
589	}
590	if (rcu_self_test_counter != early_boot_test_counter) {
591		WARN_ON(1);
592		ret = -1;
593	}
594
595	return ret;
596}
597late_initcall(rcu_verify_early_boot_tests);
598#else
599void rcu_early_boot_tests(void) {}
600#endif /* CONFIG_PROVE_RCU */
601
602#include "tasks.h"
603
604#ifndef CONFIG_TINY_RCU
605
606/*
607 * Print any significant non-default boot-time settings.
608 */
609void __init rcupdate_announce_bootup_oddness(void)
610{
611	if (rcu_normal)
612		pr_info("\tNo expedited grace period (rcu_normal).\n");
613	else if (rcu_normal_after_boot)
614		pr_info("\tNo expedited grace period (rcu_normal_after_boot).\n");
615	else if (rcu_expedited)
616		pr_info("\tAll grace periods are expedited (rcu_expedited).\n");
617	if (rcu_cpu_stall_suppress)
618		pr_info("\tRCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).\n");
619	if (rcu_cpu_stall_timeout != CONFIG_RCU_CPU_STALL_TIMEOUT)
620		pr_info("\tRCU CPU stall warnings timeout set to %d (rcu_cpu_stall_timeout).\n", rcu_cpu_stall_timeout);
621	rcu_tasks_bootup_oddness();
622}
623
624#endif /* #ifndef CONFIG_TINY_RCU */
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0+
  2/*
  3 * Read-Copy Update mechanism for mutual exclusion
  4 *
  5 * Copyright IBM Corporation, 2001
  6 *
  7 * Authors: Dipankar Sarma <dipankar@in.ibm.com>
  8 *	    Manfred Spraul <manfred@colorfullife.com>
  9 *
 10 * Based on the original work by Paul McKenney <paulmck@linux.ibm.com>
 11 * and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
 12 * Papers:
 13 * http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
 14 * http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
 15 *
 16 * For detailed explanation of Read-Copy Update mechanism see -
 17 *		http://lse.sourceforge.net/locking/rcupdate.html
 18 *
 19 */
 20#include <linux/types.h>
 21#include <linux/kernel.h>
 22#include <linux/init.h>
 23#include <linux/spinlock.h>
 24#include <linux/smp.h>
 25#include <linux/interrupt.h>
 26#include <linux/sched/signal.h>
 27#include <linux/sched/debug.h>
 28#include <linux/torture.h>
 29#include <linux/atomic.h>
 30#include <linux/bitops.h>
 31#include <linux/percpu.h>
 32#include <linux/notifier.h>
 33#include <linux/cpu.h>
 34#include <linux/mutex.h>
 35#include <linux/export.h>
 36#include <linux/hardirq.h>
 37#include <linux/delay.h>
 38#include <linux/moduleparam.h>
 39#include <linux/kthread.h>
 40#include <linux/tick.h>
 41#include <linux/rcupdate_wait.h>
 42#include <linux/sched/isolation.h>
 43#include <linux/kprobes.h>
 44#include <linux/slab.h>
 45#include <linux/irq_work.h>
 46#include <linux/rcupdate_trace.h>
 47
 48#define CREATE_TRACE_POINTS
 49
 50#include "rcu.h"
 51
 52#ifdef MODULE_PARAM_PREFIX
 53#undef MODULE_PARAM_PREFIX
 54#endif
 55#define MODULE_PARAM_PREFIX "rcupdate."
 56
 57#ifndef CONFIG_TINY_RCU
 58module_param(rcu_expedited, int, 0444);
 59module_param(rcu_normal, int, 0444);
 60static int rcu_normal_after_boot = IS_ENABLED(CONFIG_PREEMPT_RT);
 61#if !defined(CONFIG_PREEMPT_RT) || defined(CONFIG_NO_HZ_FULL)
 62module_param(rcu_normal_after_boot, int, 0444);
 63#endif
 64#endif /* #ifndef CONFIG_TINY_RCU */
 65
 66#ifdef CONFIG_DEBUG_LOCK_ALLOC
 67/**
 68 * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section?
 69 * @ret:	Best guess answer if lockdep cannot be relied on
 70 *
 71 * Returns true if lockdep must be ignored, in which case ``*ret`` contains
 72 * the best guess described below.  Otherwise returns false, in which
 73 * case ``*ret`` tells the caller nothing and the caller should instead
 74 * consult lockdep.
 75 *
 76 * If CONFIG_DEBUG_LOCK_ALLOC is selected, set ``*ret`` to nonzero iff in an
 77 * RCU-sched read-side critical section.  In absence of
 78 * CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
 79 * critical section unless it can prove otherwise.  Note that disabling
 80 * of preemption (including disabling irqs) counts as an RCU-sched
 81 * read-side critical section.  This is useful for debug checks in functions
 82 * that required that they be called within an RCU-sched read-side
 83 * critical section.
 84 *
 85 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot
 86 * and while lockdep is disabled.
 87 *
 88 * Note that if the CPU is in the idle loop from an RCU point of view (ie:
 89 * that we are in the section between ct_idle_enter() and ct_idle_exit())
 90 * then rcu_read_lock_held() sets ``*ret`` to false even if the CPU did an
 91 * rcu_read_lock().  The reason for this is that RCU ignores CPUs that are
 92 * in such a section, considering these as in extended quiescent state,
 93 * so such a CPU is effectively never in an RCU read-side critical section
 94 * regardless of what RCU primitives it invokes.  This state of affairs is
 95 * required --- we need to keep an RCU-free window in idle where the CPU may
 96 * possibly enter into low power mode. This way we can notice an extended
 97 * quiescent state to other CPUs that started a grace period. Otherwise
 98 * we would delay any grace period as long as we run in the idle task.
 99 *
100 * Similarly, we avoid claiming an RCU read lock held if the current
101 * CPU is offline.
102 */
103static bool rcu_read_lock_held_common(bool *ret)
104{
105	if (!debug_lockdep_rcu_enabled()) {
106		*ret = true;
107		return true;
108	}
109	if (!rcu_is_watching()) {
110		*ret = false;
111		return true;
112	}
113	if (!rcu_lockdep_current_cpu_online()) {
114		*ret = false;
115		return true;
116	}
117	return false;
118}
119
120int rcu_read_lock_sched_held(void)
121{
122	bool ret;
123
124	if (rcu_read_lock_held_common(&ret))
125		return ret;
126	return lock_is_held(&rcu_sched_lock_map) || !preemptible();
127}
128EXPORT_SYMBOL(rcu_read_lock_sched_held);
129#endif
130
131#ifndef CONFIG_TINY_RCU
132
133/*
134 * Should expedited grace-period primitives always fall back to their
135 * non-expedited counterparts?  Intended for use within RCU.  Note
136 * that if the user specifies both rcu_expedited and rcu_normal, then
137 * rcu_normal wins.  (Except during the time period during boot from
138 * when the first task is spawned until the rcu_set_runtime_mode()
139 * core_initcall() is invoked, at which point everything is expedited.)
140 */
141bool rcu_gp_is_normal(void)
142{
143	return READ_ONCE(rcu_normal) &&
144	       rcu_scheduler_active != RCU_SCHEDULER_INIT;
145}
146EXPORT_SYMBOL_GPL(rcu_gp_is_normal);
147
148static atomic_t rcu_async_hurry_nesting = ATOMIC_INIT(1);
149/*
150 * Should call_rcu() callbacks be processed with urgency or are
151 * they OK being executed with arbitrary delays?
152 */
153bool rcu_async_should_hurry(void)
154{
155	return !IS_ENABLED(CONFIG_RCU_LAZY) ||
156	       atomic_read(&rcu_async_hurry_nesting);
157}
158EXPORT_SYMBOL_GPL(rcu_async_should_hurry);
159
160/**
161 * rcu_async_hurry - Make future async RCU callbacks not lazy.
162 *
163 * After a call to this function, future calls to call_rcu()
164 * will be processed in a timely fashion.
165 */
166void rcu_async_hurry(void)
167{
168	if (IS_ENABLED(CONFIG_RCU_LAZY))
169		atomic_inc(&rcu_async_hurry_nesting);
170}
171EXPORT_SYMBOL_GPL(rcu_async_hurry);
172
173/**
174 * rcu_async_relax - Make future async RCU callbacks lazy.
175 *
176 * After a call to this function, future calls to call_rcu()
177 * will be processed in a lazy fashion.
178 */
179void rcu_async_relax(void)
180{
181	if (IS_ENABLED(CONFIG_RCU_LAZY))
182		atomic_dec(&rcu_async_hurry_nesting);
183}
184EXPORT_SYMBOL_GPL(rcu_async_relax);
185
186static atomic_t rcu_expedited_nesting = ATOMIC_INIT(1);
187/*
188 * Should normal grace-period primitives be expedited?  Intended for
189 * use within RCU.  Note that this function takes the rcu_expedited
190 * sysfs/boot variable and rcu_scheduler_active into account as well
191 * as the rcu_expedite_gp() nesting.  So looping on rcu_unexpedite_gp()
192 * until rcu_gp_is_expedited() returns false is a -really- bad idea.
193 */
194bool rcu_gp_is_expedited(void)
195{
196	return rcu_expedited || atomic_read(&rcu_expedited_nesting);
197}
198EXPORT_SYMBOL_GPL(rcu_gp_is_expedited);
199
200/**
201 * rcu_expedite_gp - Expedite future RCU grace periods
202 *
203 * After a call to this function, future calls to synchronize_rcu() and
204 * friends act as the corresponding synchronize_rcu_expedited() function
205 * had instead been called.
206 */
207void rcu_expedite_gp(void)
208{
209	atomic_inc(&rcu_expedited_nesting);
210}
211EXPORT_SYMBOL_GPL(rcu_expedite_gp);
212
213/**
214 * rcu_unexpedite_gp - Cancel prior rcu_expedite_gp() invocation
215 *
216 * Undo a prior call to rcu_expedite_gp().  If all prior calls to
217 * rcu_expedite_gp() are undone by a subsequent call to rcu_unexpedite_gp(),
218 * and if the rcu_expedited sysfs/boot parameter is not set, then all
219 * subsequent calls to synchronize_rcu() and friends will return to
220 * their normal non-expedited behavior.
221 */
222void rcu_unexpedite_gp(void)
223{
224	atomic_dec(&rcu_expedited_nesting);
225}
226EXPORT_SYMBOL_GPL(rcu_unexpedite_gp);
227
228static bool rcu_boot_ended __read_mostly;
229
230/*
231 * Inform RCU of the end of the in-kernel boot sequence.
232 */
233void rcu_end_inkernel_boot(void)
234{
235	rcu_unexpedite_gp();
236	rcu_async_relax();
237	if (rcu_normal_after_boot)
238		WRITE_ONCE(rcu_normal, 1);
239	rcu_boot_ended = true;
240}
241
242/*
243 * Let rcutorture know when it is OK to turn it up to eleven.
244 */
245bool rcu_inkernel_boot_has_ended(void)
246{
247	return rcu_boot_ended;
248}
249EXPORT_SYMBOL_GPL(rcu_inkernel_boot_has_ended);
250
251#endif /* #ifndef CONFIG_TINY_RCU */
252
253/*
254 * Test each non-SRCU synchronous grace-period wait API.  This is
255 * useful just after a change in mode for these primitives, and
256 * during early boot.
257 */
258void rcu_test_sync_prims(void)
259{
260	if (!IS_ENABLED(CONFIG_PROVE_RCU))
261		return;
262	pr_info("Running RCU synchronous self tests\n");
263	synchronize_rcu();
264	synchronize_rcu_expedited();
265}
266
267#if !defined(CONFIG_TINY_RCU)
268
269/*
270 * Switch to run-time mode once RCU has fully initialized.
271 */
272static int __init rcu_set_runtime_mode(void)
273{
274	rcu_test_sync_prims();
275	rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
276	kfree_rcu_scheduler_running();
277	rcu_test_sync_prims();
278	return 0;
279}
280core_initcall(rcu_set_runtime_mode);
281
282#endif /* #if !defined(CONFIG_TINY_RCU) */
283
284#ifdef CONFIG_DEBUG_LOCK_ALLOC
285static struct lock_class_key rcu_lock_key;
286struct lockdep_map rcu_lock_map = {
287	.name = "rcu_read_lock",
288	.key = &rcu_lock_key,
289	.wait_type_outer = LD_WAIT_FREE,
290	.wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT implies PREEMPT_RCU */
291};
292EXPORT_SYMBOL_GPL(rcu_lock_map);
293
294static struct lock_class_key rcu_bh_lock_key;
295struct lockdep_map rcu_bh_lock_map = {
296	.name = "rcu_read_lock_bh",
297	.key = &rcu_bh_lock_key,
298	.wait_type_outer = LD_WAIT_FREE,
299	.wait_type_inner = LD_WAIT_CONFIG, /* PREEMPT_RT makes BH preemptible. */
300};
301EXPORT_SYMBOL_GPL(rcu_bh_lock_map);
302
303static struct lock_class_key rcu_sched_lock_key;
304struct lockdep_map rcu_sched_lock_map = {
305	.name = "rcu_read_lock_sched",
306	.key = &rcu_sched_lock_key,
307	.wait_type_outer = LD_WAIT_FREE,
308	.wait_type_inner = LD_WAIT_SPIN,
309};
310EXPORT_SYMBOL_GPL(rcu_sched_lock_map);
311
312// Tell lockdep when RCU callbacks are being invoked.
313static struct lock_class_key rcu_callback_key;
314struct lockdep_map rcu_callback_map =
315	STATIC_LOCKDEP_MAP_INIT("rcu_callback", &rcu_callback_key);
316EXPORT_SYMBOL_GPL(rcu_callback_map);
317
318noinstr int notrace debug_lockdep_rcu_enabled(void)
319{
320	return rcu_scheduler_active != RCU_SCHEDULER_INACTIVE && READ_ONCE(debug_locks) &&
321	       current->lockdep_recursion == 0;
322}
323EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
324
325/**
326 * rcu_read_lock_held() - might we be in RCU read-side critical section?
327 *
328 * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an RCU
329 * read-side critical section.  In absence of CONFIG_DEBUG_LOCK_ALLOC,
330 * this assumes we are in an RCU read-side critical section unless it can
331 * prove otherwise.  This is useful for debug checks in functions that
332 * require that they be called within an RCU read-side critical section.
333 *
334 * Checks debug_lockdep_rcu_enabled() to prevent false positives during boot
335 * and while lockdep is disabled.
336 *
337 * Note that rcu_read_lock() and the matching rcu_read_unlock() must
338 * occur in the same context, for example, it is illegal to invoke
339 * rcu_read_unlock() in process context if the matching rcu_read_lock()
340 * was invoked from within an irq handler.
341 *
342 * Note that rcu_read_lock() is disallowed if the CPU is either idle or
343 * offline from an RCU perspective, so check for those as well.
344 */
345int rcu_read_lock_held(void)
346{
347	bool ret;
348
349	if (rcu_read_lock_held_common(&ret))
350		return ret;
351	return lock_is_held(&rcu_lock_map);
352}
353EXPORT_SYMBOL_GPL(rcu_read_lock_held);
354
355/**
356 * rcu_read_lock_bh_held() - might we be in RCU-bh read-side critical section?
357 *
358 * Check for bottom half being disabled, which covers both the
359 * CONFIG_PROVE_RCU and not cases.  Note that if someone uses
360 * rcu_read_lock_bh(), but then later enables BH, lockdep (if enabled)
361 * will show the situation.  This is useful for debug checks in functions
362 * that require that they be called within an RCU read-side critical
363 * section.
364 *
365 * Check debug_lockdep_rcu_enabled() to prevent false positives during boot.
366 *
367 * Note that rcu_read_lock_bh() is disallowed if the CPU is either idle or
368 * offline from an RCU perspective, so check for those as well.
369 */
370int rcu_read_lock_bh_held(void)
371{
372	bool ret;
373
374	if (rcu_read_lock_held_common(&ret))
375		return ret;
376	return in_softirq() || irqs_disabled();
377}
378EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
379
380int rcu_read_lock_any_held(void)
381{
382	bool ret;
383
384	if (rcu_read_lock_held_common(&ret))
385		return ret;
386	if (lock_is_held(&rcu_lock_map) ||
387	    lock_is_held(&rcu_bh_lock_map) ||
388	    lock_is_held(&rcu_sched_lock_map))
389		return 1;
390	return !preemptible();
391}
392EXPORT_SYMBOL_GPL(rcu_read_lock_any_held);
393
394#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
395
396/**
397 * wakeme_after_rcu() - Callback function to awaken a task after grace period
398 * @head: Pointer to rcu_head member within rcu_synchronize structure
399 *
400 * Awaken the corresponding task now that a grace period has elapsed.
401 */
402void wakeme_after_rcu(struct rcu_head *head)
403{
404	struct rcu_synchronize *rcu;
405
406	rcu = container_of(head, struct rcu_synchronize, head);
407	complete(&rcu->completion);
408}
409EXPORT_SYMBOL_GPL(wakeme_after_rcu);
410
411void __wait_rcu_gp(bool checktiny, unsigned int state, int n, call_rcu_func_t *crcu_array,
412		   struct rcu_synchronize *rs_array)
413{
414	int i;
415	int j;
416
417	/* Initialize and register callbacks for each crcu_array element. */
418	for (i = 0; i < n; i++) {
419		if (checktiny &&
420		    (crcu_array[i] == call_rcu)) {
421			might_sleep();
422			continue;
423		}
424		for (j = 0; j < i; j++)
425			if (crcu_array[j] == crcu_array[i])
426				break;
427		if (j == i) {
428			init_rcu_head_on_stack(&rs_array[i].head);
429			init_completion(&rs_array[i].completion);
430			(crcu_array[i])(&rs_array[i].head, wakeme_after_rcu);
431		}
432	}
433
434	/* Wait for all callbacks to be invoked. */
435	for (i = 0; i < n; i++) {
436		if (checktiny &&
437		    (crcu_array[i] == call_rcu))
438			continue;
439		for (j = 0; j < i; j++)
440			if (crcu_array[j] == crcu_array[i])
441				break;
442		if (j == i) {
443			wait_for_completion_state(&rs_array[i].completion, state);
444			destroy_rcu_head_on_stack(&rs_array[i].head);
445		}
446	}
447}
448EXPORT_SYMBOL_GPL(__wait_rcu_gp);
449
450void finish_rcuwait(struct rcuwait *w)
451{
452	rcu_assign_pointer(w->task, NULL);
453	__set_current_state(TASK_RUNNING);
454}
455EXPORT_SYMBOL_GPL(finish_rcuwait);
456
457#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
458void init_rcu_head(struct rcu_head *head)
459{
460	debug_object_init(head, &rcuhead_debug_descr);
461}
462EXPORT_SYMBOL_GPL(init_rcu_head);
463
464void destroy_rcu_head(struct rcu_head *head)
465{
466	debug_object_free(head, &rcuhead_debug_descr);
467}
468EXPORT_SYMBOL_GPL(destroy_rcu_head);
469
470static bool rcuhead_is_static_object(void *addr)
471{
472	return true;
473}
474
475/**
476 * init_rcu_head_on_stack() - initialize on-stack rcu_head for debugobjects
477 * @head: pointer to rcu_head structure to be initialized
478 *
479 * This function informs debugobjects of a new rcu_head structure that
480 * has been allocated as an auto variable on the stack.  This function
481 * is not required for rcu_head structures that are statically defined or
482 * that are dynamically allocated on the heap.  This function has no
483 * effect for !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
484 */
485void init_rcu_head_on_stack(struct rcu_head *head)
486{
487	debug_object_init_on_stack(head, &rcuhead_debug_descr);
488}
489EXPORT_SYMBOL_GPL(init_rcu_head_on_stack);
490
491/**
492 * destroy_rcu_head_on_stack() - destroy on-stack rcu_head for debugobjects
493 * @head: pointer to rcu_head structure to be initialized
494 *
495 * This function informs debugobjects that an on-stack rcu_head structure
496 * is about to go out of scope.  As with init_rcu_head_on_stack(), this
497 * function is not required for rcu_head structures that are statically
498 * defined or that are dynamically allocated on the heap.  Also as with
499 * init_rcu_head_on_stack(), this function has no effect for
500 * !CONFIG_DEBUG_OBJECTS_RCU_HEAD kernel builds.
501 */
502void destroy_rcu_head_on_stack(struct rcu_head *head)
503{
504	debug_object_free(head, &rcuhead_debug_descr);
505}
506EXPORT_SYMBOL_GPL(destroy_rcu_head_on_stack);
507
508const struct debug_obj_descr rcuhead_debug_descr = {
509	.name = "rcu_head",
510	.is_static_object = rcuhead_is_static_object,
511};
512EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
513#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
514
515#if defined(CONFIG_TREE_RCU) || defined(CONFIG_RCU_TRACE)
516void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
517			       unsigned long secs,
518			       unsigned long c_old, unsigned long c)
519{
520	trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c);
521}
522EXPORT_SYMBOL_GPL(do_trace_rcu_torture_read);
523#else
524#define do_trace_rcu_torture_read(rcutorturename, rhp, secs, c_old, c) \
525	do { } while (0)
526#endif
527
528#if IS_ENABLED(CONFIG_RCU_TORTURE_TEST) || IS_MODULE(CONFIG_RCU_TORTURE_TEST) || IS_ENABLED(CONFIG_LOCK_TORTURE_TEST) || IS_MODULE(CONFIG_LOCK_TORTURE_TEST)
529/* Get rcutorture access to sched_setaffinity(). */
530long torture_sched_setaffinity(pid_t pid, const struct cpumask *in_mask)
531{
532	int ret;
533
534	ret = sched_setaffinity(pid, in_mask);
535	WARN_ONCE(ret, "%s: sched_setaffinity(%d) returned %d\n", __func__, pid, ret);
536	return ret;
537}
538EXPORT_SYMBOL_GPL(torture_sched_setaffinity);
539#endif
540
541int rcu_cpu_stall_notifiers __read_mostly; // !0 = provide stall notifiers (rarely useful)
542EXPORT_SYMBOL_GPL(rcu_cpu_stall_notifiers);
543
544#ifdef CONFIG_RCU_STALL_COMMON
545int rcu_cpu_stall_ftrace_dump __read_mostly;
546module_param(rcu_cpu_stall_ftrace_dump, int, 0644);
547#ifdef CONFIG_RCU_CPU_STALL_NOTIFIER
548module_param(rcu_cpu_stall_notifiers, int, 0444);
549#endif // #ifdef CONFIG_RCU_CPU_STALL_NOTIFIER
550int rcu_cpu_stall_suppress __read_mostly; // !0 = suppress stall warnings.
551EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress);
552module_param(rcu_cpu_stall_suppress, int, 0644);
553int rcu_cpu_stall_timeout __read_mostly = CONFIG_RCU_CPU_STALL_TIMEOUT;
554module_param(rcu_cpu_stall_timeout, int, 0644);
555int rcu_exp_cpu_stall_timeout __read_mostly = CONFIG_RCU_EXP_CPU_STALL_TIMEOUT;
556module_param(rcu_exp_cpu_stall_timeout, int, 0644);
557int rcu_cpu_stall_cputime __read_mostly = IS_ENABLED(CONFIG_RCU_CPU_STALL_CPUTIME);
558module_param(rcu_cpu_stall_cputime, int, 0644);
559bool rcu_exp_stall_task_details __read_mostly;
560module_param(rcu_exp_stall_task_details, bool, 0644);
561#endif /* #ifdef CONFIG_RCU_STALL_COMMON */
562
563// Suppress boot-time RCU CPU stall warnings and rcutorture writer stall
564// warnings.  Also used by rcutorture even if stall warnings are excluded.
565int rcu_cpu_stall_suppress_at_boot __read_mostly; // !0 = suppress boot stalls.
566EXPORT_SYMBOL_GPL(rcu_cpu_stall_suppress_at_boot);
567module_param(rcu_cpu_stall_suppress_at_boot, int, 0444);
568
569/**
570 * get_completed_synchronize_rcu - Return a pre-completed polled state cookie
571 *
572 * Returns a value that will always be treated by functions like
573 * poll_state_synchronize_rcu() as a cookie whose grace period has already
574 * completed.
575 */
576unsigned long get_completed_synchronize_rcu(void)
577{
578	return RCU_GET_STATE_COMPLETED;
579}
580EXPORT_SYMBOL_GPL(get_completed_synchronize_rcu);
581
582#ifdef CONFIG_PROVE_RCU
583
584/*
585 * Early boot self test parameters.
586 */
587static bool rcu_self_test;
588module_param(rcu_self_test, bool, 0444);
589
590static int rcu_self_test_counter;
591
592static void test_callback(struct rcu_head *r)
593{
594	rcu_self_test_counter++;
595	pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
596}
597
598DEFINE_STATIC_SRCU(early_srcu);
599static unsigned long early_srcu_cookie;
600
601struct early_boot_kfree_rcu {
602	struct rcu_head rh;
603};
604
605static void early_boot_test_call_rcu(void)
606{
607	static struct rcu_head head;
608	int idx;
609	static struct rcu_head shead;
610	struct early_boot_kfree_rcu *rhp;
611
612	idx = srcu_down_read(&early_srcu);
613	srcu_up_read(&early_srcu, idx);
614	call_rcu(&head, test_callback);
615	early_srcu_cookie = start_poll_synchronize_srcu(&early_srcu);
616	call_srcu(&early_srcu, &shead, test_callback);
617	rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
618	if (!WARN_ON_ONCE(!rhp))
619		kfree_rcu(rhp, rh);
620}
621
622void rcu_early_boot_tests(void)
623{
624	pr_info("Running RCU self tests\n");
625
626	if (rcu_self_test)
627		early_boot_test_call_rcu();
628	rcu_test_sync_prims();
629}
630
631static int rcu_verify_early_boot_tests(void)
632{
633	int ret = 0;
634	int early_boot_test_counter = 0;
635
636	if (rcu_self_test) {
637		early_boot_test_counter++;
638		rcu_barrier();
639		early_boot_test_counter++;
640		srcu_barrier(&early_srcu);
641		WARN_ON_ONCE(!poll_state_synchronize_srcu(&early_srcu, early_srcu_cookie));
642		cleanup_srcu_struct(&early_srcu);
643	}
644	if (rcu_self_test_counter != early_boot_test_counter) {
645		WARN_ON(1);
646		ret = -1;
647	}
648
649	return ret;
650}
651late_initcall(rcu_verify_early_boot_tests);
652#else
653void rcu_early_boot_tests(void) {}
654#endif /* CONFIG_PROVE_RCU */
655
656#include "tasks.h"
657
658#ifndef CONFIG_TINY_RCU
659
660/*
661 * Print any significant non-default boot-time settings.
662 */
663void __init rcupdate_announce_bootup_oddness(void)
664{
665	if (rcu_normal)
666		pr_info("\tNo expedited grace period (rcu_normal).\n");
667	else if (rcu_normal_after_boot)
668		pr_info("\tNo expedited grace period (rcu_normal_after_boot).\n");
669	else if (rcu_expedited)
670		pr_info("\tAll grace periods are expedited (rcu_expedited).\n");
671	if (rcu_cpu_stall_suppress)
672		pr_info("\tRCU CPU stall warnings suppressed (rcu_cpu_stall_suppress).\n");
673	if (rcu_cpu_stall_timeout != CONFIG_RCU_CPU_STALL_TIMEOUT)
674		pr_info("\tRCU CPU stall warnings timeout set to %d (rcu_cpu_stall_timeout).\n", rcu_cpu_stall_timeout);
675	rcu_tasks_bootup_oddness();
676}
677
678#endif /* #ifndef CONFIG_TINY_RCU */