1/*
   2 * Copyright (c) 2016 Intel Corporation
   3 *
   4 * Permission to use, copy, modify, distribute, and sell this software and its
   5 * documentation for any purpose is hereby granted without fee, provided that
   6 * the above copyright notice appear in all copies and that both that copyright
   7 * notice and this permission notice appear in supporting documentation, and
   8 * that the name of the copyright holders not be used in advertising or
   9 * publicity pertaining to distribution of the software without specific,
  10 * written prior permission.  The copyright holders make no representations
  11 * about the suitability of this software for any purpose.  It is provided "as
  12 * is" without express or implied warranty.
  13 *
  14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
  15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
  16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
  17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
  18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
  19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
  20 * OF THIS SOFTWARE.
  21 */
  22
  23#ifndef __DRM_CONNECTOR_H__
  24#define __DRM_CONNECTOR_H__
  25
  26#include <linux/list.h>
  27#include <linux/llist.h>
  28#include <linux/ctype.h>
  29#include <linux/hdmi.h>
  30#include <linux/notifier.h>
  31#include <drm/drm_mode_object.h>
  32#include <drm/drm_util.h>
 
  33
  34#include <uapi/drm/drm_mode.h>
  35
  36struct drm_connector_helper_funcs;
  37struct drm_modeset_acquire_ctx;
  38struct drm_device;
  39struct drm_crtc;
 
  40struct drm_encoder;
  41struct drm_panel;
  42struct drm_property;
  43struct drm_property_blob;
  44struct drm_printer;
  45struct drm_privacy_screen;
  46struct edid;
  47struct i2c_adapter;
  48
  49enum drm_connector_force {
  50	DRM_FORCE_UNSPECIFIED,
  51	DRM_FORCE_OFF,
  52	DRM_FORCE_ON,         /* force on analog part normally */
  53	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
  54};
  55
  56/**
  57 * enum drm_connector_status - status for a &drm_connector
  58 *
  59 * This enum is used to track the connector status. There are no separate
  60 * #defines for the uapi!
  61 */
  62enum drm_connector_status {
  63	/**
  64	 * @connector_status_connected: The connector is definitely connected to
  65	 * a sink device, and can be enabled.
  66	 */
  67	connector_status_connected = 1,
  68	/**
  69	 * @connector_status_disconnected: The connector isn't connected to a
  70	 * sink device which can be autodetect. For digital outputs like DP or
  71	 * HDMI (which can be realiable probed) this means there's really
  72	 * nothing there. It is driver-dependent whether a connector with this
  73	 * status can be lit up or not.
  74	 */
  75	connector_status_disconnected = 2,
  76	/**
  77	 * @connector_status_unknown: The connector's status could not be
  78	 * reliably detected. This happens when probing would either cause
  79	 * flicker (like load-detection when the connector is in use), or when a
  80	 * hardware resource isn't available (like when load-detection needs a
  81	 * free CRTC). It should be possible to light up the connector with one
  82	 * of the listed fallback modes. For default configuration userspace
  83	 * should only try to light up connectors with unknown status when
  84	 * there's not connector with @connector_status_connected.
  85	 */
  86	connector_status_unknown = 3,
  87};
  88
  89/**
  90 * enum drm_connector_registration_state - userspace registration status for
  91 * a &drm_connector
  92 *
  93 * This enum is used to track the status of initializing a connector and
  94 * registering it with userspace, so that DRM can prevent bogus modesets on
  95 * connectors that no longer exist.
  96 */
  97enum drm_connector_registration_state {
  98	/**
  99	 * @DRM_CONNECTOR_INITIALIZING: The connector has just been created,
 100	 * but has yet to be exposed to userspace. There should be no
 101	 * additional restrictions to how the state of this connector may be
 102	 * modified.
 103	 */
 104	DRM_CONNECTOR_INITIALIZING = 0,
 105
 106	/**
 107	 * @DRM_CONNECTOR_REGISTERED: The connector has been fully initialized
 108	 * and registered with sysfs, as such it has been exposed to
 109	 * userspace. There should be no additional restrictions to how the
 110	 * state of this connector may be modified.
 111	 */
 112	DRM_CONNECTOR_REGISTERED = 1,
 113
 114	/**
 115	 * @DRM_CONNECTOR_UNREGISTERED: The connector has either been exposed
 116	 * to userspace and has since been unregistered and removed from
 117	 * userspace, or the connector was unregistered before it had a chance
 118	 * to be exposed to userspace (e.g. still in the
 119	 * @DRM_CONNECTOR_INITIALIZING state). When a connector is
 120	 * unregistered, there are additional restrictions to how its state
 121	 * may be modified:
 122	 *
 123	 * - An unregistered connector may only have its DPMS changed from
 124	 *   On->Off. Once DPMS is changed to Off, it may not be switched back
 125	 *   to On.
 126	 * - Modesets are not allowed on unregistered connectors, unless they
 127	 *   would result in disabling its assigned CRTCs. This means
 128	 *   disabling a CRTC on an unregistered connector is OK, but enabling
 129	 *   one is not.
 130	 * - Removing a CRTC from an unregistered connector is OK, but new
 131	 *   CRTCs may never be assigned to an unregistered connector.
 132	 */
 133	DRM_CONNECTOR_UNREGISTERED = 2,
 134};
 135
 136enum subpixel_order {
 137	SubPixelUnknown = 0,
 138	SubPixelHorizontalRGB,
 139	SubPixelHorizontalBGR,
 140	SubPixelVerticalRGB,
 141	SubPixelVerticalBGR,
 142	SubPixelNone,
 143
 144};
 145
 146/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 147 * struct drm_scrambling: sink's scrambling support.
 148 */
 149struct drm_scrambling {
 150	/**
 151	 * @supported: scrambling supported for rates > 340 Mhz.
 152	 */
 153	bool supported;
 154	/**
 155	 * @low_rates: scrambling supported for rates <= 340 Mhz.
 156	 */
 157	bool low_rates;
 158};
 159
 160/*
 161 * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink
 162 *
 163 * Provides SCDC register support and capabilities related information on a
 164 * HDMI 2.0 sink. In case of a HDMI 1.4 sink, all parameter must be 0.
 165 */
 166struct drm_scdc {
 167	/**
 168	 * @supported: status control & data channel present.
 169	 */
 170	bool supported;
 171	/**
 172	 * @read_request: sink is capable of generating scdc read request.
 173	 */
 174	bool read_request;
 175	/**
 176	 * @scrambling: sink's scrambling capabilities
 177	 */
 178	struct drm_scrambling scrambling;
 179};
 180
 181/**
 182 * struct drm_hdmi_dsc_cap - DSC capabilities of HDMI sink
 183 *
 184 * Describes the DSC support provided by HDMI 2.1 sink.
 185 * The information is fetched fom additional HFVSDB blocks defined
 186 * for HDMI 2.1.
 187 */
 188struct drm_hdmi_dsc_cap {
 189	/** @v_1p2: flag for dsc1.2 version support by sink */
 190	bool v_1p2;
 191
 192	/** @native_420: Does sink support DSC with 4:2:0 compression */
 193	bool native_420;
 194
 195	/**
 196	 * @all_bpp: Does sink support all bpp with 4:4:4: or 4:2:2
 197	 * compressed formats
 198	 */
 199	bool all_bpp;
 200
 201	/**
 202	 * @bpc_supported: compressed bpc supported by sink : 10, 12 or 16 bpc
 203	 */
 204	u8 bpc_supported;
 205
 206	/** @max_slices: maximum number of Horizontal slices supported by */
 207	u8 max_slices;
 208
 209	/** @clk_per_slice : max pixel clock in MHz supported per slice */
 210	int clk_per_slice;
 211
 212	/** @max_lanes : dsc max lanes supported for Fixed rate Link training */
 213	u8 max_lanes;
 214
 215	/** @max_frl_rate_per_lane : maximum frl rate with DSC per lane */
 216	u8 max_frl_rate_per_lane;
 217
 218	/** @total_chunk_kbytes: max size of chunks in KBs supported per line*/
 219	u8 total_chunk_kbytes;
 220};
 221
 222/**
 223 * struct drm_hdmi_info - runtime information about the connected HDMI sink
 224 *
 225 * Describes if a given display supports advanced HDMI 2.0 features.
 226 * This information is available in CEA-861-F extension blocks (like HF-VSDB).
 227 */
 228struct drm_hdmi_info {
 229	/** @scdc: sink's scdc support and capabilities */
 230	struct drm_scdc scdc;
 231
 232	/**
 233	 * @y420_vdb_modes: bitmap of modes which can support ycbcr420
 234	 * output only (not normal RGB/YCBCR444/422 outputs). The max VIC
 235	 * defined by the CEA-861-G spec is 219, so the size is 256 bits to map
 236	 * up to 256 VICs.
 237	 */
 238	unsigned long y420_vdb_modes[BITS_TO_LONGS(256)];
 239
 240	/**
 241	 * @y420_cmdb_modes: bitmap of modes which can support ycbcr420
 242	 * output also, along with normal HDMI outputs. The max VIC defined by
 243	 * the CEA-861-G spec is 219, so the size is 256 bits to map up to 256
 244	 * VICs.
 245	 */
 246	unsigned long y420_cmdb_modes[BITS_TO_LONGS(256)];
 247
 248	/** @y420_cmdb_map: bitmap of SVD index, to extraxt vcb modes */
 249	u64 y420_cmdb_map;
 250
 251	/** @y420_dc_modes: bitmap of deep color support index */
 252	u8 y420_dc_modes;
 253
 254	/** @max_frl_rate_per_lane: support fixed rate link */
 255	u8 max_frl_rate_per_lane;
 256
 257	/** @max_lanes: supported by sink */
 258	u8 max_lanes;
 259
 260	/** @dsc_cap: DSC capabilities of the sink */
 261	struct drm_hdmi_dsc_cap dsc_cap;
 262};
 263
 264/**
 265 * enum drm_link_status - connector's link_status property value
 266 *
 267 * This enum is used as the connector's link status property value.
 268 * It is set to the values defined in uapi.
 269 *
 270 * @DRM_LINK_STATUS_GOOD: DP Link is Good as a result of successful
 271 *                        link training
 272 * @DRM_LINK_STATUS_BAD: DP Link is BAD as a result of link training
 273 *                       failure
 274 */
 275enum drm_link_status {
 276	DRM_LINK_STATUS_GOOD = DRM_MODE_LINK_STATUS_GOOD,
 277	DRM_LINK_STATUS_BAD = DRM_MODE_LINK_STATUS_BAD,
 278};
 279
 280/**
 281 * enum drm_panel_orientation - panel_orientation info for &drm_display_info
 282 *
 283 * This enum is used to track the (LCD) panel orientation. There are no
 284 * separate #defines for the uapi!
 285 *
 286 * @DRM_MODE_PANEL_ORIENTATION_UNKNOWN: The drm driver has not provided any
 287 *					panel orientation information (normal
 288 *					for non panels) in this case the "panel
 289 *					orientation" connector prop will not be
 290 *					attached.
 291 * @DRM_MODE_PANEL_ORIENTATION_NORMAL:	The top side of the panel matches the
 292 *					top side of the device's casing.
 293 * @DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP: The top side of the panel matches the
 294 *					bottom side of the device's casing, iow
 295 *					the panel is mounted upside-down.
 296 * @DRM_MODE_PANEL_ORIENTATION_LEFT_UP:	The left side of the panel matches the
 297 *					top side of the device's casing.
 298 * @DRM_MODE_PANEL_ORIENTATION_RIGHT_UP: The right side of the panel matches the
 299 *					top side of the device's casing.
 300 */
 301enum drm_panel_orientation {
 302	DRM_MODE_PANEL_ORIENTATION_UNKNOWN = -1,
 303	DRM_MODE_PANEL_ORIENTATION_NORMAL = 0,
 304	DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP,
 305	DRM_MODE_PANEL_ORIENTATION_LEFT_UP,
 306	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 307};
 308
 309/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 310 * struct drm_monitor_range_info - Panel's Monitor range in EDID for
 311 * &drm_display_info
 312 *
 313 * This struct is used to store a frequency range supported by panel
 314 * as parsed from EDID's detailed monitor range descriptor block.
 315 *
 316 * @min_vfreq: This is the min supported refresh rate in Hz from
 317 *             EDID's detailed monitor range.
 318 * @max_vfreq: This is the max supported refresh rate in Hz from
 319 *             EDID's detailed monitor range
 320 */
 321struct drm_monitor_range_info {
 322	u16 min_vfreq;
 323	u16 max_vfreq;
 324};
 325
 326/**
 327 * struct drm_luminance_range_info - Panel's luminance range for
 328 * &drm_display_info. Calculated using data in EDID
 329 *
 330 * This struct is used to store a luminance range supported by panel
 331 * as calculated using data from EDID's static hdr metadata.
 332 *
 333 * @min_luminance: This is the min supported luminance value
 334 *
 335 * @max_luminance: This is the max supported luminance value
 336 */
 337struct drm_luminance_range_info {
 338	u32 min_luminance;
 339	u32 max_luminance;
 340};
 341
 342/**
 343 * enum drm_privacy_screen_status - privacy screen status
 344 *
 345 * This enum is used to track and control the state of the integrated privacy
 346 * screen present on some display panels, via the "privacy-screen sw-state"
 347 * and "privacy-screen hw-state" properties. Note the _LOCKED enum values
 348 * are only valid for the "privacy-screen hw-state" property.
 349 *
 350 * @PRIVACY_SCREEN_DISABLED:
 351 *  The privacy-screen on the panel is disabled
 352 * @PRIVACY_SCREEN_ENABLED:
 353 *  The privacy-screen on the panel is enabled
 354 * @PRIVACY_SCREEN_DISABLED_LOCKED:
 355 *  The privacy-screen on the panel is disabled and locked (cannot be changed)
 356 * @PRIVACY_SCREEN_ENABLED_LOCKED:
 357 *  The privacy-screen on the panel is enabled and locked (cannot be changed)
 358 */
 359enum drm_privacy_screen_status {
 360	PRIVACY_SCREEN_DISABLED = 0,
 361	PRIVACY_SCREEN_ENABLED,
 362	PRIVACY_SCREEN_DISABLED_LOCKED,
 363	PRIVACY_SCREEN_ENABLED_LOCKED,
 364};
 365
 366/*
 367 * This is a consolidated colorimetry list supported by HDMI and
 
 
 368 * DP protocol standard. The respective connectors will register
 369 * a property with the subset of this list (supported by that
 370 * respective protocol). Userspace will set the colorspace through
 371 * a colorspace property which will be created and exposed to
 372 * userspace.
 373 */
 374
 375/* For Default case, driver will set the colorspace */
 376#define DRM_MODE_COLORIMETRY_DEFAULT			0
 377/* CEA 861 Normal Colorimetry options */
 378#define DRM_MODE_COLORIMETRY_NO_DATA			0
 379#define DRM_MODE_COLORIMETRY_SMPTE_170M_YCC		1
 380#define DRM_MODE_COLORIMETRY_BT709_YCC			2
 381/* CEA 861 Extended Colorimetry Options */
 382#define DRM_MODE_COLORIMETRY_XVYCC_601			3
 383#define DRM_MODE_COLORIMETRY_XVYCC_709			4
 384#define DRM_MODE_COLORIMETRY_SYCC_601			5
 385#define DRM_MODE_COLORIMETRY_OPYCC_601			6
 386#define DRM_MODE_COLORIMETRY_OPRGB			7
 387#define DRM_MODE_COLORIMETRY_BT2020_CYCC		8
 388#define DRM_MODE_COLORIMETRY_BT2020_RGB			9
 389#define DRM_MODE_COLORIMETRY_BT2020_YCC			10
 390/* Additional Colorimetry extension added as part of CTA 861.G */
 391#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65		11
 392#define DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER		12
 393/* Additional Colorimetry Options added for DP 1.4a VSC Colorimetry Format */
 394#define DRM_MODE_COLORIMETRY_RGB_WIDE_FIXED		13
 395#define DRM_MODE_COLORIMETRY_RGB_WIDE_FLOAT		14
 396#define DRM_MODE_COLORIMETRY_BT601_YCC			15
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 397
 398/**
 399 * enum drm_bus_flags - bus_flags info for &drm_display_info
 400 *
 401 * This enum defines signal polarities and clock edge information for signals on
 402 * a bus as bitmask flags.
 403 *
 404 * The clock edge information is conveyed by two sets of symbols,
 405 * DRM_BUS_FLAGS_*_DRIVE_\* and DRM_BUS_FLAGS_*_SAMPLE_\*. When this enum is
 406 * used to describe a bus from the point of view of the transmitter, the
 407 * \*_DRIVE_\* flags should be used. When used from the point of view of the
 408 * receiver, the \*_SAMPLE_\* flags should be used. The \*_DRIVE_\* and
 409 * \*_SAMPLE_\* flags alias each other, with the \*_SAMPLE_POSEDGE and
 410 * \*_SAMPLE_NEGEDGE flags being equal to \*_DRIVE_NEGEDGE and \*_DRIVE_POSEDGE
 411 * respectively. This simplifies code as signals are usually sampled on the
 412 * opposite edge of the driving edge. Transmitters and receivers may however
 413 * need to take other signal timings into account to convert between driving
 414 * and sample edges.
 415 */
 416enum drm_bus_flags {
 417	/**
 418	 * @DRM_BUS_FLAG_DE_LOW:
 419	 *
 420	 * The Data Enable signal is active low
 421	 */
 422	DRM_BUS_FLAG_DE_LOW = BIT(0),
 423
 424	/**
 425	 * @DRM_BUS_FLAG_DE_HIGH:
 426	 *
 427	 * The Data Enable signal is active high
 428	 */
 429	DRM_BUS_FLAG_DE_HIGH = BIT(1),
 430
 431	/**
 432	 * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE:
 433	 *
 434	 * Data is driven on the rising edge of the pixel clock
 435	 */
 436	DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2),
 437
 438	/**
 439	 * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE:
 440	 *
 441	 * Data is driven on the falling edge of the pixel clock
 442	 */
 443	DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3),
 444
 445	/**
 446	 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE:
 447	 *
 448	 * Data is sampled on the rising edge of the pixel clock
 449	 */
 450	DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
 451
 452	/**
 453	 * @DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE:
 454	 *
 455	 * Data is sampled on the falling edge of the pixel clock
 456	 */
 457	DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
 458
 459	/**
 460	 * @DRM_BUS_FLAG_DATA_MSB_TO_LSB:
 461	 *
 462	 * Data is transmitted MSB to LSB on the bus
 463	 */
 464	DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4),
 465
 466	/**
 467	 * @DRM_BUS_FLAG_DATA_LSB_TO_MSB:
 468	 *
 469	 * Data is transmitted LSB to MSB on the bus
 470	 */
 471	DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5),
 472
 473	/**
 474	 * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE:
 475	 *
 476	 * Sync signals are driven on the rising edge of the pixel clock
 477	 */
 478	DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6),
 479
 480	/**
 481	 * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE:
 482	 *
 483	 * Sync signals are driven on the falling edge of the pixel clock
 484	 */
 485	DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7),
 486
 487	/**
 488	 * @DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE:
 489	 *
 490	 * Sync signals are sampled on the rising edge of the pixel clock
 491	 */
 492	DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
 493
 494	/**
 495	 * @DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE:
 496	 *
 497	 * Sync signals are sampled on the falling edge of the pixel clock
 498	 */
 499	DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
 500
 501	/**
 502	 * @DRM_BUS_FLAG_SHARP_SIGNALS:
 503	 *
 504	 *  Set if the Sharp-specific signals (SPL, CLS, PS, REV) must be used
 505	 */
 506	DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8),
 507};
 508
 509/**
 510 * struct drm_display_info - runtime data about the connected sink
 511 *
 512 * Describes a given display (e.g. CRT or flat panel) and its limitations. For
 513 * fixed display sinks like built-in panels there's not much difference between
 514 * this and &struct drm_connector. But for sinks with a real cable this
 515 * structure is meant to describe all the things at the other end of the cable.
 516 *
 517 * For sinks which provide an EDID this can be filled out by calling
 518 * drm_add_edid_modes().
 519 */
 520struct drm_display_info {
 521	/**
 522	 * @width_mm: Physical width in mm.
 523	 */
 524	unsigned int width_mm;
 525
 526	/**
 527	 * @height_mm: Physical height in mm.
 528	 */
 529	unsigned int height_mm;
 530
 531	/**
 532	 * @bpc: Maximum bits per color channel. Used by HDMI and DP outputs.
 533	 */
 534	unsigned int bpc;
 535
 536	/**
 537	 * @subpixel_order: Subpixel order of LCD panels.
 538	 */
 539	enum subpixel_order subpixel_order;
 540
 541#define DRM_COLOR_FORMAT_RGB444		(1<<0)
 542#define DRM_COLOR_FORMAT_YCBCR444	(1<<1)
 543#define DRM_COLOR_FORMAT_YCBCR422	(1<<2)
 544#define DRM_COLOR_FORMAT_YCBCR420	(1<<3)
 545
 546	/**
 547	 * @panel_orientation: Read only connector property for built-in panels,
 548	 * indicating the orientation of the panel vs the device's casing.
 549	 * drm_connector_init() sets this to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
 550	 * When not UNKNOWN this gets used by the drm_fb_helpers to rotate the
 551	 * fb to compensate and gets exported as prop to userspace.
 552	 */
 553	int panel_orientation;
 554
 555	/**
 556	 * @color_formats: HDMI Color formats, selects between RGB and YCrCb
 557	 * modes. Used DRM_COLOR_FORMAT\_ defines, which are _not_ the same ones
 558	 * as used to describe the pixel format in framebuffers, and also don't
 559	 * match the formats in @bus_formats which are shared with v4l.
 560	 */
 561	u32 color_formats;
 562
 563	/**
 564	 * @bus_formats: Pixel data format on the wire, somewhat redundant with
 565	 * @color_formats. Array of size @num_bus_formats encoded using
 566	 * MEDIA_BUS_FMT\_ defines shared with v4l and media drivers.
 567	 */
 568	const u32 *bus_formats;
 569	/**
 570	 * @num_bus_formats: Size of @bus_formats array.
 571	 */
 572	unsigned int num_bus_formats;
 573
 574	/**
 575	 * @bus_flags: Additional information (like pixel signal polarity) for
 576	 * the pixel data on the bus, using &enum drm_bus_flags values
 577	 * DRM_BUS_FLAGS\_.
 578	 */
 579	u32 bus_flags;
 580
 581	/**
 582	 * @max_tmds_clock: Maximum TMDS clock rate supported by the
 583	 * sink in kHz. 0 means undefined.
 584	 */
 585	int max_tmds_clock;
 586
 587	/**
 588	 * @dvi_dual: Dual-link DVI sink?
 589	 */
 590	bool dvi_dual;
 591
 592	/**
 593	 * @is_hdmi: True if the sink is an HDMI device.
 594	 *
 595	 * This field shall be used instead of calling
 596	 * drm_detect_hdmi_monitor() when possible.
 597	 */
 598	bool is_hdmi;
 599
 600	/**
 
 
 
 
 
 
 
 
 601	 * @has_hdmi_infoframe: Does the sink support the HDMI infoframe?
 602	 */
 603	bool has_hdmi_infoframe;
 604
 605	/**
 606	 * @rgb_quant_range_selectable: Does the sink support selecting
 607	 * the RGB quantization range?
 608	 */
 609	bool rgb_quant_range_selectable;
 610
 611	/**
 612	 * @edid_hdmi_rgb444_dc_modes: Mask of supported hdmi deep color modes
 613	 * in RGB 4:4:4. Even more stuff redundant with @bus_formats.
 614	 */
 615	u8 edid_hdmi_rgb444_dc_modes;
 616
 617	/**
 618	 * @edid_hdmi_ycbcr444_dc_modes: Mask of supported hdmi deep color
 619	 * modes in YCbCr 4:4:4. Even more stuff redundant with @bus_formats.
 620	 */
 621	u8 edid_hdmi_ycbcr444_dc_modes;
 622
 623	/**
 624	 * @cea_rev: CEA revision of the HDMI sink.
 625	 */
 626	u8 cea_rev;
 627
 628	/**
 629	 * @hdmi: advance features of a HDMI sink.
 630	 */
 631	struct drm_hdmi_info hdmi;
 632
 633	/**
 634	 * @non_desktop: Non desktop display (HMD).
 635	 */
 636	bool non_desktop;
 637
 638	/**
 639	 * @monitor_range: Frequency range supported by monitor range descriptor
 640	 */
 641	struct drm_monitor_range_info monitor_range;
 642
 643	/**
 644	 * @luminance_range: Luminance range supported by panel
 645	 */
 646	struct drm_luminance_range_info luminance_range;
 647
 648	/**
 649	 * @mso_stream_count: eDP Multi-SST Operation (MSO) stream count from
 650	 * the DisplayID VESA vendor block. 0 for conventional Single-Stream
 651	 * Transport (SST), or 2 or 4 MSO streams.
 652	 */
 653	u8 mso_stream_count;
 654
 655	/**
 656	 * @mso_pixel_overlap: eDP MSO segment pixel overlap, 0-8 pixels.
 657	 */
 658	u8 mso_pixel_overlap;
 659
 660	/**
 661	 * @max_dsc_bpp: Maximum DSC target bitrate, if it is set to 0 the
 662	 * monitor's default value is used instead.
 663	 */
 664	u32 max_dsc_bpp;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 665};
 666
 667int drm_display_info_set_bus_formats(struct drm_display_info *info,
 668				     const u32 *formats,
 669				     unsigned int num_formats);
 670
 671/**
 672 * struct drm_connector_tv_margins - TV connector related margins
 673 *
 674 * Describes the margins in pixels to put around the image on TV
 675 * connectors to deal with overscan.
 676 */
 677struct drm_connector_tv_margins {
 678	/**
 679	 * @bottom: Bottom margin in pixels.
 680	 */
 681	unsigned int bottom;
 682
 683	/**
 684	 * @left: Left margin in pixels.
 685	 */
 686	unsigned int left;
 687
 688	/**
 689	 * @right: Right margin in pixels.
 690	 */
 691	unsigned int right;
 692
 693	/**
 694	 * @top: Top margin in pixels.
 695	 */
 696	unsigned int top;
 697};
 698
 699/**
 700 * struct drm_tv_connector_state - TV connector related states
 701 * @select_subconnector: selected subconnector
 702 * @subconnector: detected subconnector
 703 * @margins: TV margins
 
 704 * @mode: TV mode
 705 * @brightness: brightness in percent
 706 * @contrast: contrast in percent
 707 * @flicker_reduction: flicker reduction in percent
 708 * @overscan: overscan in percent
 709 * @saturation: saturation in percent
 710 * @hue: hue in percent
 711 */
 712struct drm_tv_connector_state {
 713	enum drm_mode_subconnector select_subconnector;
 714	enum drm_mode_subconnector subconnector;
 715	struct drm_connector_tv_margins margins;
 
 716	unsigned int mode;
 717	unsigned int brightness;
 718	unsigned int contrast;
 719	unsigned int flicker_reduction;
 720	unsigned int overscan;
 721	unsigned int saturation;
 722	unsigned int hue;
 723};
 724
 725/**
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 726 * struct drm_connector_state - mutable connector state
 727 */
 728struct drm_connector_state {
 729	/** @connector: backpointer to the connector */
 730	struct drm_connector *connector;
 731
 732	/**
 733	 * @crtc: CRTC to connect connector to, NULL if disabled.
 734	 *
 735	 * Do not change this directly, use drm_atomic_set_crtc_for_connector()
 736	 * instead.
 737	 */
 738	struct drm_crtc *crtc;
 739
 740	/**
 741	 * @best_encoder:
 742	 *
 743	 * Used by the atomic helpers to select the encoder, through the
 744	 * &drm_connector_helper_funcs.atomic_best_encoder or
 745	 * &drm_connector_helper_funcs.best_encoder callbacks.
 746	 *
 747	 * This is also used in the atomic helpers to map encoders to their
 748	 * current and previous connectors, see
 749	 * drm_atomic_get_old_connector_for_encoder() and
 750	 * drm_atomic_get_new_connector_for_encoder().
 751	 *
 752	 * NOTE: Atomic drivers must fill this out (either themselves or through
 753	 * helpers), for otherwise the GETCONNECTOR and GETENCODER IOCTLs will
 754	 * not return correct data to userspace.
 755	 */
 756	struct drm_encoder *best_encoder;
 757
 758	/**
 759	 * @link_status: Connector link_status to keep track of whether link is
 760	 * GOOD or BAD to notify userspace if retraining is necessary.
 761	 */
 762	enum drm_link_status link_status;
 763
 764	/** @state: backpointer to global drm_atomic_state */
 765	struct drm_atomic_state *state;
 766
 767	/**
 768	 * @commit: Tracks the pending commit to prevent use-after-free conditions.
 769	 *
 770	 * Is only set when @crtc is NULL.
 771	 */
 772	struct drm_crtc_commit *commit;
 773
 774	/** @tv: TV connector state */
 775	struct drm_tv_connector_state tv;
 776
 777	/**
 778	 * @self_refresh_aware:
 779	 *
 780	 * This tracks whether a connector is aware of the self refresh state.
 781	 * It should be set to true for those connector implementations which
 782	 * understand the self refresh state. This is needed since the crtc
 783	 * registers the self refresh helpers and it doesn't know if the
 784	 * connectors downstream have implemented self refresh entry/exit.
 785	 *
 786	 * Drivers should set this to true in atomic_check if they know how to
 787	 * handle self_refresh requests.
 788	 */
 789	bool self_refresh_aware;
 790
 791	/**
 792	 * @picture_aspect_ratio: Connector property to control the
 793	 * HDMI infoframe aspect ratio setting.
 794	 *
 795	 * The %DRM_MODE_PICTURE_ASPECT_\* values much match the
 796	 * values for &enum hdmi_picture_aspect
 797	 */
 798	enum hdmi_picture_aspect picture_aspect_ratio;
 799
 800	/**
 801	 * @content_type: Connector property to control the
 802	 * HDMI infoframe content type setting.
 803	 * The %DRM_MODE_CONTENT_TYPE_\* values much
 804	 * match the values.
 805	 */
 806	unsigned int content_type;
 807
 808	/**
 809	 * @hdcp_content_type: Connector property to pass the type of
 810	 * protected content. This is most commonly used for HDCP.
 811	 */
 812	unsigned int hdcp_content_type;
 813
 814	/**
 815	 * @scaling_mode: Connector property to control the
 816	 * upscaling, mostly used for built-in panels.
 817	 */
 818	unsigned int scaling_mode;
 819
 820	/**
 821	 * @content_protection: Connector property to request content
 822	 * protection. This is most commonly used for HDCP.
 823	 */
 824	unsigned int content_protection;
 825
 826	/**
 827	 * @colorspace: State variable for Connector property to request
 828	 * colorspace change on Sink. This is most commonly used to switch
 829	 * to wider color gamuts like BT2020.
 830	 */
 831	u32 colorspace;
 832
 833	/**
 834	 * @writeback_job: Writeback job for writeback connectors
 835	 *
 836	 * Holds the framebuffer and out-fence for a writeback connector. As
 837	 * the writeback completion may be asynchronous to the normal commit
 838	 * cycle, the writeback job lifetime is managed separately from the
 839	 * normal atomic state by this object.
 840	 *
 841	 * See also: drm_writeback_queue_job() and
 842	 * drm_writeback_signal_completion()
 843	 */
 844	struct drm_writeback_job *writeback_job;
 845
 846	/**
 847	 * @max_requested_bpc: Connector property to limit the maximum bit
 848	 * depth of the pixels.
 849	 */
 850	u8 max_requested_bpc;
 851
 852	/**
 853	 * @max_bpc: Connector max_bpc based on the requested max_bpc property
 854	 * and the connector bpc limitations obtained from edid.
 855	 */
 856	u8 max_bpc;
 857
 858	/**
 859	 * @privacy_screen_sw_state: See :ref:`Standard Connector
 860	 * Properties<standard_connector_properties>`
 861	 */
 862	enum drm_privacy_screen_status privacy_screen_sw_state;
 863
 864	/**
 865	 * @hdr_output_metadata:
 866	 * DRM blob property for HDR output metadata
 867	 */
 868	struct drm_property_blob *hdr_output_metadata;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 869};
 870
 871/**
 872 * struct drm_connector_funcs - control connectors on a given device
 873 *
 874 * Each CRTC may have one or more connectors attached to it.  The functions
 875 * below allow the core DRM code to control connectors, enumerate available modes,
 876 * etc.
 877 */
 878struct drm_connector_funcs {
 879	/**
 880	 * @dpms:
 881	 *
 882	 * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
 883	 * is exposed as a standard property on the connector, but diverted to
 884	 * this callback in the drm core. Note that atomic drivers don't
 885	 * implement the 4 level DPMS support on the connector any more, but
 886	 * instead only have an on/off "ACTIVE" property on the CRTC object.
 887	 *
 888	 * This hook is not used by atomic drivers, remapping of the legacy DPMS
 889	 * property is entirely handled in the DRM core.
 890	 *
 891	 * RETURNS:
 892	 *
 893	 * 0 on success or a negative error code on failure.
 894	 */
 895	int (*dpms)(struct drm_connector *connector, int mode);
 896
 897	/**
 898	 * @reset:
 899	 *
 900	 * Reset connector hardware and software state to off. This function isn't
 901	 * called by the core directly, only through drm_mode_config_reset().
 902	 * It's not a helper hook only for historical reasons.
 903	 *
 904	 * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
 905	 * atomic state using this hook.
 906	 */
 907	void (*reset)(struct drm_connector *connector);
 908
 909	/**
 910	 * @detect:
 911	 *
 912	 * Check to see if anything is attached to the connector. The parameter
 913	 * force is set to false whilst polling, true when checking the
 914	 * connector due to a user request. force can be used by the driver to
 915	 * avoid expensive, destructive operations during automated probing.
 916	 *
 917	 * This callback is optional, if not implemented the connector will be
 918	 * considered as always being attached.
 919	 *
 920	 * FIXME:
 921	 *
 922	 * Note that this hook is only called by the probe helper. It's not in
 923	 * the helper library vtable purely for historical reasons. The only DRM
 924	 * core	entry point to probe connector state is @fill_modes.
 925	 *
 926	 * Note that the helper library will already hold
 927	 * &drm_mode_config.connection_mutex. Drivers which need to grab additional
 928	 * locks to avoid races with concurrent modeset changes need to use
 929	 * &drm_connector_helper_funcs.detect_ctx instead.
 930	 *
 931	 * Also note that this callback can be called no matter the
 932	 * state the connector is in. Drivers that need the underlying
 933	 * device to be powered to perform the detection will first need
 934	 * to make sure it's been properly enabled.
 935	 *
 936	 * RETURNS:
 937	 *
 938	 * drm_connector_status indicating the connector's status.
 939	 */
 940	enum drm_connector_status (*detect)(struct drm_connector *connector,
 941					    bool force);
 942
 943	/**
 944	 * @force:
 945	 *
 946	 * This function is called to update internal encoder state when the
 947	 * connector is forced to a certain state by userspace, either through
 948	 * the sysfs interfaces or on the kernel cmdline. In that case the
 949	 * @detect callback isn't called.
 950	 *
 951	 * FIXME:
 952	 *
 953	 * Note that this hook is only called by the probe helper. It's not in
 954	 * the helper library vtable purely for historical reasons. The only DRM
 955	 * core	entry point to probe connector state is @fill_modes.
 956	 */
 957	void (*force)(struct drm_connector *connector);
 958
 959	/**
 960	 * @fill_modes:
 961	 *
 962	 * Entry point for output detection and basic mode validation. The
 963	 * driver should reprobe the output if needed (e.g. when hotplug
 964	 * handling is unreliable), add all detected modes to &drm_connector.modes
 965	 * and filter out any the device can't support in any configuration. It
 966	 * also needs to filter out any modes wider or higher than the
 967	 * parameters max_width and max_height indicate.
 968	 *
 969	 * The drivers must also prune any modes no longer valid from
 970	 * &drm_connector.modes. Furthermore it must update
 971	 * &drm_connector.status and &drm_connector.edid.  If no EDID has been
 972	 * received for this output connector->edid must be NULL.
 973	 *
 974	 * Drivers using the probe helpers should use
 975	 * drm_helper_probe_single_connector_modes() to implement this
 976	 * function.
 977	 *
 978	 * RETURNS:
 979	 *
 980	 * The number of modes detected and filled into &drm_connector.modes.
 981	 */
 982	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
 983
 984	/**
 985	 * @set_property:
 986	 *
 987	 * This is the legacy entry point to update a property attached to the
 988	 * connector.
 989	 *
 990	 * This callback is optional if the driver does not support any legacy
 991	 * driver-private properties. For atomic drivers it is not used because
 992	 * property handling is done entirely in the DRM core.
 993	 *
 994	 * RETURNS:
 995	 *
 996	 * 0 on success or a negative error code on failure.
 997	 */
 998	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 999			     uint64_t val);
1000
1001	/**
1002	 * @late_register:
1003	 *
1004	 * This optional hook can be used to register additional userspace
1005	 * interfaces attached to the connector, light backlight control, i2c,
1006	 * DP aux or similar interfaces. It is called late in the driver load
1007	 * sequence from drm_connector_register() when registering all the
1008	 * core drm connector interfaces. Everything added from this callback
1009	 * should be unregistered in the early_unregister callback.
1010	 *
1011	 * This is called while holding &drm_connector.mutex.
1012	 *
1013	 * Returns:
1014	 *
1015	 * 0 on success, or a negative error code on failure.
1016	 */
1017	int (*late_register)(struct drm_connector *connector);
1018
1019	/**
1020	 * @early_unregister:
1021	 *
1022	 * This optional hook should be used to unregister the additional
1023	 * userspace interfaces attached to the connector from
1024	 * late_register(). It is called from drm_connector_unregister(),
1025	 * early in the driver unload sequence to disable userspace access
1026	 * before data structures are torndown.
1027	 *
1028	 * This is called while holding &drm_connector.mutex.
1029	 */
1030	void (*early_unregister)(struct drm_connector *connector);
1031
1032	/**
1033	 * @destroy:
1034	 *
1035	 * Clean up connector resources. This is called at driver unload time
1036	 * through drm_mode_config_cleanup(). It can also be called at runtime
1037	 * when a connector is being hot-unplugged for drivers that support
1038	 * connector hotplugging (e.g. DisplayPort MST).
1039	 */
1040	void (*destroy)(struct drm_connector *connector);
1041
1042	/**
1043	 * @atomic_duplicate_state:
1044	 *
1045	 * Duplicate the current atomic state for this connector and return it.
1046	 * The core and helpers guarantee that any atomic state duplicated with
1047	 * this hook and still owned by the caller (i.e. not transferred to the
1048	 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
1049	 * cleaned up by calling the @atomic_destroy_state hook in this
1050	 * structure.
1051	 *
1052	 * This callback is mandatory for atomic drivers.
1053	 *
1054	 * Atomic drivers which don't subclass &struct drm_connector_state should use
1055	 * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
1056	 * state structure to extend it with driver-private state should use
1057	 * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
1058	 * duplicated in a consistent fashion across drivers.
1059	 *
1060	 * It is an error to call this hook before &drm_connector.state has been
1061	 * initialized correctly.
1062	 *
1063	 * NOTE:
1064	 *
1065	 * If the duplicate state references refcounted resources this hook must
1066	 * acquire a reference for each of them. The driver must release these
1067	 * references again in @atomic_destroy_state.
1068	 *
1069	 * RETURNS:
1070	 *
1071	 * Duplicated atomic state or NULL when the allocation failed.
1072	 */
1073	struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
1074
1075	/**
1076	 * @atomic_destroy_state:
1077	 *
1078	 * Destroy a state duplicated with @atomic_duplicate_state and release
1079	 * or unreference all resources it references
1080	 *
1081	 * This callback is mandatory for atomic drivers.
1082	 */
1083	void (*atomic_destroy_state)(struct drm_connector *connector,
1084				     struct drm_connector_state *state);
1085
1086	/**
1087	 * @atomic_set_property:
1088	 *
1089	 * Decode a driver-private property value and store the decoded value
1090	 * into the passed-in state structure. Since the atomic core decodes all
1091	 * standardized properties (even for extensions beyond the core set of
1092	 * properties which might not be implemented by all drivers) this
1093	 * requires drivers to subclass the state structure.
1094	 *
1095	 * Such driver-private properties should really only be implemented for
1096	 * truly hardware/vendor specific state. Instead it is preferred to
1097	 * standardize atomic extension and decode the properties used to expose
1098	 * such an extension in the core.
1099	 *
1100	 * Do not call this function directly, use
1101	 * drm_atomic_connector_set_property() instead.
1102	 *
1103	 * This callback is optional if the driver does not support any
1104	 * driver-private atomic properties.
1105	 *
1106	 * NOTE:
1107	 *
1108	 * This function is called in the state assembly phase of atomic
1109	 * modesets, which can be aborted for any reason (including on
1110	 * userspace's request to just check whether a configuration would be
1111	 * possible). Drivers MUST NOT touch any persistent state (hardware or
1112	 * software) or data structures except the passed in @state parameter.
1113	 *
1114	 * Also since userspace controls in which order properties are set this
1115	 * function must not do any input validation (since the state update is
1116	 * incomplete and hence likely inconsistent). Instead any such input
1117	 * validation must be done in the various atomic_check callbacks.
1118	 *
1119	 * RETURNS:
1120	 *
1121	 * 0 if the property has been found, -EINVAL if the property isn't
1122	 * implemented by the driver (which shouldn't ever happen, the core only
1123	 * asks for properties attached to this connector). No other validation
1124	 * is allowed by the driver. The core already checks that the property
1125	 * value is within the range (integer, valid enum value, ...) the driver
1126	 * set when registering the property.
1127	 */
1128	int (*atomic_set_property)(struct drm_connector *connector,
1129				   struct drm_connector_state *state,
1130				   struct drm_property *property,
1131				   uint64_t val);
1132
1133	/**
1134	 * @atomic_get_property:
1135	 *
1136	 * Reads out the decoded driver-private property. This is used to
1137	 * implement the GETCONNECTOR IOCTL.
1138	 *
1139	 * Do not call this function directly, use
1140	 * drm_atomic_connector_get_property() instead.
1141	 *
1142	 * This callback is optional if the driver does not support any
1143	 * driver-private atomic properties.
1144	 *
1145	 * RETURNS:
1146	 *
1147	 * 0 on success, -EINVAL if the property isn't implemented by the
1148	 * driver (which shouldn't ever happen, the core only asks for
1149	 * properties attached to this connector).
1150	 */
1151	int (*atomic_get_property)(struct drm_connector *connector,
1152				   const struct drm_connector_state *state,
1153				   struct drm_property *property,
1154				   uint64_t *val);
1155
1156	/**
1157	 * @atomic_print_state:
1158	 *
1159	 * If driver subclasses &struct drm_connector_state, it should implement
1160	 * this optional hook for printing additional driver specific state.
1161	 *
1162	 * Do not call this directly, use drm_atomic_connector_print_state()
1163	 * instead.
1164	 */
1165	void (*atomic_print_state)(struct drm_printer *p,
1166				   const struct drm_connector_state *state);
1167
1168	/**
1169	 * @oob_hotplug_event:
1170	 *
1171	 * This will get called when a hotplug-event for a drm-connector
1172	 * has been received from a source outside the display driver / device.
1173	 */
1174	void (*oob_hotplug_event)(struct drm_connector *connector);
 
1175
1176	/**
1177	 * @debugfs_init:
1178	 *
1179	 * Allows connectors to create connector-specific debugfs files.
1180	 */
1181	void (*debugfs_init)(struct drm_connector *connector, struct dentry *root);
1182};
1183
1184/**
1185 * struct drm_cmdline_mode - DRM Mode passed through the kernel command-line
1186 *
1187 * Each connector can have an initial mode with additional options
1188 * passed through the kernel command line. This structure allows to
1189 * express those parameters and will be filled by the command-line
1190 * parser.
1191 */
1192struct drm_cmdline_mode {
1193	/**
1194	 * @name:
1195	 *
1196	 * Name of the mode.
1197	 */
1198	char name[DRM_DISPLAY_MODE_LEN];
1199
1200	/**
1201	 * @specified:
1202	 *
1203	 * Has a mode been read from the command-line?
1204	 */
1205	bool specified;
1206
1207	/**
1208	 * @refresh_specified:
1209	 *
1210	 * Did the mode have a preferred refresh rate?
1211	 */
1212	bool refresh_specified;
1213
1214	/**
1215	 * @bpp_specified:
1216	 *
1217	 * Did the mode have a preferred BPP?
1218	 */
1219	bool bpp_specified;
1220
1221	/**
1222	 * @pixel_clock:
1223	 *
1224	 * Pixel Clock in kHz. Optional.
1225	 */
1226	unsigned int pixel_clock;
1227
1228	/**
1229	 * @xres:
1230	 *
1231	 * Active resolution on the X axis, in pixels.
1232	 */
1233	int xres;
1234
1235	/**
1236	 * @yres:
1237	 *
1238	 * Active resolution on the Y axis, in pixels.
1239	 */
1240	int yres;
1241
1242	/**
1243	 * @bpp:
1244	 *
1245	 * Bits per pixels for the mode.
1246	 */
1247	int bpp;
1248
1249	/**
1250	 * @refresh:
1251	 *
1252	 * Refresh rate, in Hertz.
1253	 */
1254	int refresh;
1255
1256	/**
1257	 * @rb:
1258	 *
1259	 * Do we need to use reduced blanking?
1260	 */
1261	bool rb;
1262
1263	/**
1264	 * @interlace:
1265	 *
1266	 * The mode is interlaced.
1267	 */
1268	bool interlace;
1269
1270	/**
1271	 * @cvt:
1272	 *
1273	 * The timings will be calculated using the VESA Coordinated
1274	 * Video Timings instead of looking up the mode from a table.
1275	 */
1276	bool cvt;
1277
1278	/**
1279	 * @margins:
1280	 *
1281	 * Add margins to the mode calculation (1.8% of xres rounded
1282	 * down to 8 pixels and 1.8% of yres).
1283	 */
1284	bool margins;
1285
1286	/**
1287	 * @force:
1288	 *
1289	 * Ignore the hotplug state of the connector, and force its
1290	 * state to one of the DRM_FORCE_* values.
1291	 */
1292	enum drm_connector_force force;
1293
1294	/**
1295	 * @rotation_reflection:
1296	 *
1297	 * Initial rotation and reflection of the mode setup from the
1298	 * command line. See DRM_MODE_ROTATE_* and
1299	 * DRM_MODE_REFLECT_*. The only rotations supported are
1300	 * DRM_MODE_ROTATE_0 and DRM_MODE_ROTATE_180.
1301	 */
1302	unsigned int rotation_reflection;
1303
1304	/**
1305	 * @panel_orientation:
1306	 *
1307	 * drm-connector "panel orientation" property override value,
1308	 * DRM_MODE_PANEL_ORIENTATION_UNKNOWN if not set.
1309	 */
1310	enum drm_panel_orientation panel_orientation;
1311
1312	/**
1313	 * @tv_margins: TV margins to apply to the mode.
1314	 */
1315	struct drm_connector_tv_margins tv_margins;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1316};
1317
1318/**
1319 * struct drm_connector - central DRM connector control structure
1320 *
1321 * Each connector may be connected to one or more CRTCs, or may be clonable by
1322 * another connector if they can share a CRTC.  Each connector also has a specific
1323 * position in the broader display (referred to as a 'screen' though it could
1324 * span multiple monitors).
1325 */
1326struct drm_connector {
1327	/** @dev: parent DRM device */
1328	struct drm_device *dev;
1329	/** @kdev: kernel device for sysfs attributes */
1330	struct device *kdev;
1331	/** @attr: sysfs attributes */
1332	struct device_attribute *attr;
1333	/**
1334	 * @fwnode: associated fwnode supplied by platform firmware
1335	 *
1336	 * Drivers can set this to associate a fwnode with a connector, drivers
1337	 * are expected to get a reference on the fwnode when setting this.
1338	 * drm_connector_cleanup() will call fwnode_handle_put() on this.
1339	 */
1340	struct fwnode_handle *fwnode;
1341
1342	/**
1343	 * @head:
1344	 *
1345	 * List of all connectors on a @dev, linked from
1346	 * &drm_mode_config.connector_list. Protected by
1347	 * &drm_mode_config.connector_list_lock, but please only use
1348	 * &drm_connector_list_iter to walk this list.
1349	 */
1350	struct list_head head;
1351
1352	/**
1353	 * @global_connector_list_entry:
1354	 *
1355	 * Connector entry in the global connector-list, used by
1356	 * drm_connector_find_by_fwnode().
1357	 */
1358	struct list_head global_connector_list_entry;
1359
1360	/** @base: base KMS object */
1361	struct drm_mode_object base;
1362
1363	/** @name: human readable name, can be overwritten by the driver */
1364	char *name;
1365
1366	/**
1367	 * @mutex: Lock for general connector state, but currently only protects
1368	 * @registered. Most of the connector state is still protected by
1369	 * &drm_mode_config.mutex.
1370	 */
1371	struct mutex mutex;
1372
1373	/**
1374	 * @index: Compacted connector index, which matches the position inside
1375	 * the mode_config.list for drivers not supporting hot-add/removing. Can
1376	 * be used as an array index. It is invariant over the lifetime of the
1377	 * connector.
1378	 */
1379	unsigned index;
1380
1381	/**
1382	 * @connector_type:
1383	 * one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
1384	 */
1385	int connector_type;
1386	/** @connector_type_id: index into connector type enum */
1387	int connector_type_id;
1388	/**
1389	 * @interlace_allowed:
1390	 * Can this connector handle interlaced modes? Only used by
1391	 * drm_helper_probe_single_connector_modes() for mode filtering.
1392	 */
1393	bool interlace_allowed;
1394	/**
1395	 * @doublescan_allowed:
1396	 * Can this connector handle doublescan? Only used by
1397	 * drm_helper_probe_single_connector_modes() for mode filtering.
1398	 */
1399	bool doublescan_allowed;
1400	/**
1401	 * @stereo_allowed:
1402	 * Can this connector handle stereo modes? Only used by
1403	 * drm_helper_probe_single_connector_modes() for mode filtering.
1404	 */
1405	bool stereo_allowed;
1406
1407	/**
1408	 * @ycbcr_420_allowed : This bool indicates if this connector is
1409	 * capable of handling YCBCR 420 output. While parsing the EDID
1410	 * blocks it's very helpful to know if the source is capable of
1411	 * handling YCBCR 420 outputs.
1412	 */
1413	bool ycbcr_420_allowed;
1414
1415	/**
1416	 * @registration_state: Is this connector initializing, exposed
1417	 * (registered) with userspace, or unregistered?
1418	 *
1419	 * Protected by @mutex.
1420	 */
1421	enum drm_connector_registration_state registration_state;
1422
1423	/**
1424	 * @modes:
1425	 * Modes available on this connector (from fill_modes() + user).
1426	 * Protected by &drm_mode_config.mutex.
1427	 */
1428	struct list_head modes;
1429
1430	/**
1431	 * @status:
1432	 * One of the drm_connector_status enums (connected, not, or unknown).
1433	 * Protected by &drm_mode_config.mutex.
1434	 */
1435	enum drm_connector_status status;
1436
1437	/**
1438	 * @probed_modes:
1439	 * These are modes added by probing with DDC or the BIOS, before
1440	 * filtering is applied. Used by the probe helpers. Protected by
1441	 * &drm_mode_config.mutex.
1442	 */
1443	struct list_head probed_modes;
1444
1445	/**
1446	 * @display_info: Display information is filled from EDID information
1447	 * when a display is detected. For non hot-pluggable displays such as
1448	 * flat panels in embedded systems, the driver should initialize the
1449	 * &drm_display_info.width_mm and &drm_display_info.height_mm fields
1450	 * with the physical size of the display.
1451	 *
1452	 * Protected by &drm_mode_config.mutex.
1453	 */
1454	struct drm_display_info display_info;
1455
1456	/** @funcs: connector control functions */
1457	const struct drm_connector_funcs *funcs;
1458
1459	/**
1460	 * @edid_blob_ptr: DRM property containing EDID if present. Protected by
1461	 * &drm_mode_config.mutex. This should be updated only by calling
 
 
1462	 * drm_connector_update_edid_property().
 
 
1463	 */
1464	struct drm_property_blob *edid_blob_ptr;
1465
1466	/** @properties: property tracking for this connector */
1467	struct drm_object_properties properties;
1468
1469	/**
1470	 * @scaling_mode_property: Optional atomic property to control the
1471	 * upscaling. See drm_connector_attach_content_protection_property().
1472	 */
1473	struct drm_property *scaling_mode_property;
1474
1475	/**
1476	 * @vrr_capable_property: Optional property to help userspace
1477	 * query hardware support for variable refresh rate on a connector.
1478	 * connector. Drivers can add the property to a connector by
1479	 * calling drm_connector_attach_vrr_capable_property().
1480	 *
1481	 * This should be updated only by calling
1482	 * drm_connector_set_vrr_capable_property().
1483	 */
1484	struct drm_property *vrr_capable_property;
1485
1486	/**
1487	 * @colorspace_property: Connector property to set the suitable
1488	 * colorspace supported by the sink.
1489	 */
1490	struct drm_property *colorspace_property;
1491
1492	/**
1493	 * @path_blob_ptr:
1494	 *
1495	 * DRM blob property data for the DP MST path property. This should only
1496	 * be updated by calling drm_connector_set_path_property().
1497	 */
1498	struct drm_property_blob *path_blob_ptr;
1499
1500	/**
 
 
 
 
 
1501	 * @max_bpc_property: Default connector property for the max bpc to be
1502	 * driven out of the connector.
1503	 */
1504	struct drm_property *max_bpc_property;
1505
1506	/** @privacy_screen: drm_privacy_screen for this connector, or NULL. */
1507	struct drm_privacy_screen *privacy_screen;
1508
1509	/** @privacy_screen_notifier: privacy-screen notifier_block */
1510	struct notifier_block privacy_screen_notifier;
1511
1512	/**
1513	 * @privacy_screen_sw_state_property: Optional atomic property for the
1514	 * connector to control the integrated privacy screen.
1515	 */
1516	struct drm_property *privacy_screen_sw_state_property;
1517
1518	/**
1519	 * @privacy_screen_hw_state_property: Optional atomic property for the
1520	 * connector to report the actual integrated privacy screen state.
1521	 */
1522	struct drm_property *privacy_screen_hw_state_property;
1523
 
 
 
 
 
 
1524#define DRM_CONNECTOR_POLL_HPD (1 << 0)
1525#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
1526#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
1527
1528	/**
1529	 * @polled:
1530	 *
1531	 * Connector polling mode, a combination of
1532	 *
1533	 * DRM_CONNECTOR_POLL_HPD
1534	 *     The connector generates hotplug events and doesn't need to be
1535	 *     periodically polled. The CONNECT and DISCONNECT flags must not
1536	 *     be set together with the HPD flag.
1537	 *
1538	 * DRM_CONNECTOR_POLL_CONNECT
1539	 *     Periodically poll the connector for connection.
1540	 *
1541	 * DRM_CONNECTOR_POLL_DISCONNECT
1542	 *     Periodically poll the connector for disconnection, without
1543	 *     causing flickering even when the connector is in use. DACs should
1544	 *     rarely do this without a lot of testing.
1545	 *
1546	 * Set to 0 for connectors that don't support connection status
1547	 * discovery.
1548	 */
1549	uint8_t polled;
1550
1551	/**
1552	 * @dpms: Current dpms state. For legacy drivers the
1553	 * &drm_connector_funcs.dpms callback must update this. For atomic
1554	 * drivers, this is handled by the core atomic code, and drivers must
1555	 * only take &drm_crtc_state.active into account.
1556	 */
1557	int dpms;
1558
1559	/** @helper_private: mid-layer private data */
1560	const struct drm_connector_helper_funcs *helper_private;
1561
1562	/** @cmdline_mode: mode line parsed from the kernel cmdline for this connector */
1563	struct drm_cmdline_mode cmdline_mode;
1564	/** @force: a DRM_FORCE_<foo> state for forced mode sets */
1565	enum drm_connector_force force;
1566
1567	/**
1568	 * @edid_override: Override EDID set via debugfs.
1569	 *
1570	 * Do not modify or access outside of the drm_edid_override_* family of
1571	 * functions.
1572	 */
1573	const struct drm_edid *edid_override;
1574
1575	/**
1576	 * @edid_override_mutex: Protect access to edid_override.
1577	 */
1578	struct mutex edid_override_mutex;
1579
1580	/** @epoch_counter: used to detect any other changes in connector, besides status */
1581	u64 epoch_counter;
1582
1583	/**
1584	 * @possible_encoders: Bit mask of encoders that can drive this
1585	 * connector, drm_encoder_index() determines the index into the bitfield
1586	 * and the bits are set with drm_connector_attach_encoder().
1587	 */
1588	u32 possible_encoders;
1589
1590	/**
1591	 * @encoder: Currently bound encoder driving this connector, if any.
1592	 * Only really meaningful for non-atomic drivers. Atomic drivers should
1593	 * instead look at &drm_connector_state.best_encoder, and in case they
1594	 * need the CRTC driving this output, &drm_connector_state.crtc.
1595	 */
1596	struct drm_encoder *encoder;
1597
1598#define MAX_ELD_BYTES	128
1599	/** @eld: EDID-like data, if present */
1600	uint8_t eld[MAX_ELD_BYTES];
 
 
 
1601	/** @latency_present: AV delay info from ELD, if found */
1602	bool latency_present[2];
1603	/**
1604	 * @video_latency: Video latency info from ELD, if found.
1605	 * [0]: progressive, [1]: interlaced
1606	 */
1607	int video_latency[2];
1608	/**
1609	 * @audio_latency: audio latency info from ELD, if found
1610	 * [0]: progressive, [1]: interlaced
1611	 */
1612	int audio_latency[2];
1613
1614	/**
1615	 * @ddc: associated ddc adapter.
1616	 * A connector usually has its associated ddc adapter. If a driver uses
1617	 * this field, then an appropriate symbolic link is created in connector
1618	 * sysfs directory to make it easy for the user to tell which i2c
1619	 * adapter is for a particular display.
1620	 *
1621	 * The field should be set by calling drm_connector_init_with_ddc().
1622	 */
1623	struct i2c_adapter *ddc;
1624
1625	/**
1626	 * @null_edid_counter: track sinks that give us all zeros for the EDID.
1627	 * Needed to workaround some HW bugs where we get all 0s
1628	 */
1629	int null_edid_counter;
1630
1631	/** @bad_edid_counter: track sinks that give us an EDID with invalid checksum */
1632	unsigned bad_edid_counter;
1633
1634	/**
1635	 * @edid_corrupt: Indicates whether the last read EDID was corrupt. Used
1636	 * in Displayport compliance testing - Displayport Link CTS Core 1.2
1637	 * rev1.1 4.2.2.6
1638	 */
1639	bool edid_corrupt;
1640	/**
1641	 * @real_edid_checksum: real edid checksum for corrupted edid block.
1642	 * Required in Displayport 1.4 compliance testing
1643	 * rev1.1 4.2.2.6
1644	 */
1645	u8 real_edid_checksum;
1646
1647	/** @debugfs_entry: debugfs directory for this connector */
1648	struct dentry *debugfs_entry;
1649
1650	/**
1651	 * @state:
1652	 *
1653	 * Current atomic state for this connector.
1654	 *
1655	 * This is protected by &drm_mode_config.connection_mutex. Note that
1656	 * nonblocking atomic commits access the current connector state without
1657	 * taking locks. Either by going through the &struct drm_atomic_state
1658	 * pointers, see for_each_oldnew_connector_in_state(),
1659	 * for_each_old_connector_in_state() and
1660	 * for_each_new_connector_in_state(). Or through careful ordering of
1661	 * atomic commit operations as implemented in the atomic helpers, see
1662	 * &struct drm_crtc_commit.
1663	 */
1664	struct drm_connector_state *state;
1665
1666	/* DisplayID bits. FIXME: Extract into a substruct? */
1667
1668	/**
1669	 * @tile_blob_ptr:
1670	 *
1671	 * DRM blob property data for the tile property (used mostly by DP MST).
1672	 * This is meant for screens which are driven through separate display
1673	 * pipelines represented by &drm_crtc, which might not be running with
1674	 * genlocked clocks. For tiled panels which are genlocked, like
1675	 * dual-link LVDS or dual-link DSI, the driver should try to not expose
1676	 * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
1677	 *
1678	 * This should only be updated by calling
1679	 * drm_connector_set_tile_property().
1680	 */
1681	struct drm_property_blob *tile_blob_ptr;
1682
1683	/** @has_tile: is this connector connected to a tiled monitor */
1684	bool has_tile;
1685	/** @tile_group: tile group for the connected monitor */
1686	struct drm_tile_group *tile_group;
1687	/** @tile_is_single_monitor: whether the tile is one monitor housing */
1688	bool tile_is_single_monitor;
1689
1690	/** @num_h_tile: number of horizontal tiles in the tile group */
1691	/** @num_v_tile: number of vertical tiles in the tile group */
1692	uint8_t num_h_tile, num_v_tile;
1693	/** @tile_h_loc: horizontal location of this tile */
1694	/** @tile_v_loc: vertical location of this tile */
1695	uint8_t tile_h_loc, tile_v_loc;
1696	/** @tile_h_size: horizontal size of this tile. */
1697	/** @tile_v_size: vertical size of this tile. */
1698	uint16_t tile_h_size, tile_v_size;
1699
1700	/**
1701	 * @free_node:
1702	 *
1703	 * List used only by &drm_connector_list_iter to be able to clean up a
1704	 * connector from any context, in conjunction with
1705	 * &drm_mode_config.connector_free_work.
1706	 */
1707	struct llist_node free_node;
1708
1709	/** @hdr_sink_metadata: HDR Metadata Information read from sink */
1710	struct hdr_sink_metadata hdr_sink_metadata;
 
 
 
 
 
1711};
1712
1713#define obj_to_connector(x) container_of(x, struct drm_connector, base)
1714
1715int drm_connector_init(struct drm_device *dev,
1716		       struct drm_connector *connector,
1717		       const struct drm_connector_funcs *funcs,
1718		       int connector_type);
1719int drm_connector_init_with_ddc(struct drm_device *dev,
1720				struct drm_connector *connector,
1721				const struct drm_connector_funcs *funcs,
1722				int connector_type,
1723				struct i2c_adapter *ddc);
1724int drmm_connector_init(struct drm_device *dev,
1725			struct drm_connector *connector,
1726			const struct drm_connector_funcs *funcs,
1727			int connector_type,
1728			struct i2c_adapter *ddc);
 
 
 
 
 
 
 
 
 
1729void drm_connector_attach_edid_property(struct drm_connector *connector);
1730int drm_connector_register(struct drm_connector *connector);
1731void drm_connector_unregister(struct drm_connector *connector);
1732int drm_connector_attach_encoder(struct drm_connector *connector,
1733				      struct drm_encoder *encoder);
1734
1735void drm_connector_cleanup(struct drm_connector *connector);
1736
1737static inline unsigned int drm_connector_index(const struct drm_connector *connector)
1738{
1739	return connector->index;
1740}
1741
1742static inline u32 drm_connector_mask(const struct drm_connector *connector)
1743{
1744	return 1 << connector->index;
1745}
1746
1747/**
1748 * drm_connector_lookup - lookup connector object
1749 * @dev: DRM device
1750 * @file_priv: drm file to check for lease against.
1751 * @id: connector object id
1752 *
1753 * This function looks up the connector object specified by id
1754 * add takes a reference to it.
1755 */
1756static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
1757		struct drm_file *file_priv,
1758		uint32_t id)
1759{
1760	struct drm_mode_object *mo;
1761	mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CONNECTOR);
1762	return mo ? obj_to_connector(mo) : NULL;
1763}
1764
1765/**
1766 * drm_connector_get - acquire a connector reference
1767 * @connector: DRM connector
1768 *
1769 * This function increments the connector's refcount.
1770 */
1771static inline void drm_connector_get(struct drm_connector *connector)
1772{
1773	drm_mode_object_get(&connector->base);
1774}
1775
1776/**
1777 * drm_connector_put - release a connector reference
1778 * @connector: DRM connector
1779 *
1780 * This function decrements the connector's reference count and frees the
1781 * object if the reference count drops to zero.
1782 */
1783static inline void drm_connector_put(struct drm_connector *connector)
1784{
1785	drm_mode_object_put(&connector->base);
1786}
1787
1788/**
1789 * drm_connector_is_unregistered - has the connector been unregistered from
1790 * userspace?
1791 * @connector: DRM connector
1792 *
1793 * Checks whether or not @connector has been unregistered from userspace.
1794 *
1795 * Returns:
1796 * True if the connector was unregistered, false if the connector is
1797 * registered or has not yet been registered with userspace.
1798 */
1799static inline bool
1800drm_connector_is_unregistered(struct drm_connector *connector)
1801{
1802	return READ_ONCE(connector->registration_state) ==
1803		DRM_CONNECTOR_UNREGISTERED;
1804}
1805
1806void drm_connector_oob_hotplug_event(struct fwnode_handle *connector_fwnode);
 
1807const char *drm_get_connector_type_name(unsigned int connector_type);
1808const char *drm_get_connector_status_name(enum drm_connector_status status);
1809const char *drm_get_subpixel_order_name(enum subpixel_order order);
1810const char *drm_get_dpms_name(int val);
1811const char *drm_get_dvi_i_subconnector_name(int val);
1812const char *drm_get_dvi_i_select_name(int val);
 
1813const char *drm_get_tv_subconnector_name(int val);
1814const char *drm_get_tv_select_name(int val);
1815const char *drm_get_dp_subconnector_name(int val);
1816const char *drm_get_content_protection_name(int val);
1817const char *drm_get_hdcp_content_type_name(int val);
1818
 
 
1819int drm_mode_create_dvi_i_properties(struct drm_device *dev);
1820void drm_connector_attach_dp_subconnector_property(struct drm_connector *connector);
1821
1822int drm_mode_create_tv_margin_properties(struct drm_device *dev);
 
 
 
1823int drm_mode_create_tv_properties(struct drm_device *dev,
1824				  unsigned int num_modes,
1825				  const char * const modes[]);
1826void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
1827int drm_mode_create_scaling_mode_property(struct drm_device *dev);
1828int drm_connector_attach_content_type_property(struct drm_connector *dev);
1829int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
1830					       u32 scaling_mode_mask);
1831int drm_connector_attach_vrr_capable_property(
1832		struct drm_connector *connector);
 
1833int drm_connector_attach_colorspace_property(struct drm_connector *connector);
1834int drm_connector_attach_hdr_output_metadata_property(struct drm_connector *connector);
1835bool drm_connector_atomic_hdr_metadata_equal(struct drm_connector_state *old_state,
1836					     struct drm_connector_state *new_state);
1837int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
1838int drm_mode_create_hdmi_colorspace_property(struct drm_connector *connector);
1839int drm_mode_create_dp_colorspace_property(struct drm_connector *connector);
 
 
1840int drm_mode_create_content_type_property(struct drm_device *dev);
1841int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
1842
1843int drm_connector_set_path_property(struct drm_connector *connector,
1844				    const char *path);
1845int drm_connector_set_tile_property(struct drm_connector *connector);
1846int drm_connector_update_edid_property(struct drm_connector *connector,
1847				       const struct edid *edid);
1848void drm_connector_set_link_status_property(struct drm_connector *connector,
1849					    uint64_t link_status);
1850void drm_connector_set_vrr_capable_property(
1851		struct drm_connector *connector, bool capable);
1852int drm_connector_set_panel_orientation(
1853	struct drm_connector *connector,
1854	enum drm_panel_orientation panel_orientation);
1855int drm_connector_set_panel_orientation_with_quirk(
1856	struct drm_connector *connector,
1857	enum drm_panel_orientation panel_orientation,
1858	int width, int height);
1859int drm_connector_set_orientation_from_panel(
1860	struct drm_connector *connector,
1861	struct drm_panel *panel);
1862int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
1863					  int min, int max);
1864void drm_connector_create_privacy_screen_properties(struct drm_connector *conn);
1865void drm_connector_attach_privacy_screen_properties(struct drm_connector *conn);
1866void drm_connector_attach_privacy_screen_provider(
1867	struct drm_connector *connector, struct drm_privacy_screen *priv);
1868void drm_connector_update_privacy_screen(const struct drm_connector_state *connector_state);
1869
1870/**
1871 * struct drm_tile_group - Tile group metadata
1872 * @refcount: reference count
1873 * @dev: DRM device
1874 * @id: tile group id exposed to userspace
1875 * @group_data: Sink-private data identifying this group
1876 *
1877 * @group_data corresponds to displayid vend/prod/serial for external screens
1878 * with an EDID.
1879 */
1880struct drm_tile_group {
1881	struct kref refcount;
1882	struct drm_device *dev;
1883	int id;
1884	u8 group_data[8];
1885};
1886
1887struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
1888						  const char topology[8]);
1889struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
1890					       const char topology[8]);
1891void drm_mode_put_tile_group(struct drm_device *dev,
1892			     struct drm_tile_group *tg);
1893
1894/**
1895 * struct drm_connector_list_iter - connector_list iterator
1896 *
1897 * This iterator tracks state needed to be able to walk the connector_list
1898 * within struct drm_mode_config. Only use together with
1899 * drm_connector_list_iter_begin(), drm_connector_list_iter_end() and
1900 * drm_connector_list_iter_next() respectively the convenience macro
1901 * drm_for_each_connector_iter().
1902 *
1903 * Note that the return value of drm_connector_list_iter_next() is only valid
1904 * up to the next drm_connector_list_iter_next() or
1905 * drm_connector_list_iter_end() call. If you want to use the connector later,
1906 * then you need to grab your own reference first using drm_connector_get().
1907 */
1908struct drm_connector_list_iter {
1909/* private: */
1910	struct drm_device *dev;
1911	struct drm_connector *conn;
1912};
1913
1914void drm_connector_list_iter_begin(struct drm_device *dev,
1915				   struct drm_connector_list_iter *iter);
1916struct drm_connector *
1917drm_connector_list_iter_next(struct drm_connector_list_iter *iter);
1918void drm_connector_list_iter_end(struct drm_connector_list_iter *iter);
1919
1920bool drm_connector_has_possible_encoder(struct drm_connector *connector,
1921					struct drm_encoder *encoder);
 
1922
1923/**
1924 * drm_for_each_connector_iter - connector_list iterator macro
1925 * @connector: &struct drm_connector pointer used as cursor
1926 * @iter: &struct drm_connector_list_iter
1927 *
1928 * Note that @connector is only valid within the list body, if you want to use
1929 * @connector after calling drm_connector_list_iter_end() then you need to grab
1930 * your own reference first using drm_connector_get().
1931 */
1932#define drm_for_each_connector_iter(connector, iter) \
1933	while ((connector = drm_connector_list_iter_next(iter)))
1934
1935/**
1936 * drm_connector_for_each_possible_encoder - iterate connector's possible encoders
1937 * @connector: &struct drm_connector pointer
1938 * @encoder: &struct drm_encoder pointer used as cursor
1939 */
1940#define drm_connector_for_each_possible_encoder(connector, encoder) \
1941	drm_for_each_encoder_mask(encoder, (connector)->dev, \
1942				  (connector)->possible_encoders)
1943
1944#endif