Linux Audio

Check our new training course

Loading...
v6.2
  1// SPDX-License-Identifier: GPL-2.0+
  2/*
  3 * (C) Copyright David Brownell 2000-2002
  4 */
  5
  6#include <linux/kernel.h>
  7#include <linux/module.h>
  8#include <linux/pci.h>
  9#include <linux/usb.h>
 10#include <linux/usb/hcd.h>
 11
 12#include <asm/io.h>
 13#include <asm/irq.h>
 14
 15#ifdef CONFIG_PPC_PMAC
 16#include <asm/machdep.h>
 17#include <asm/pmac_feature.h>
 18#endif
 19
 20#include "usb.h"
 21
 22
 23/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
 24
 25/*
 26 * Coordinate handoffs between EHCI and companion controllers
 27 * during EHCI probing and system resume.
 28 */
 29
 30static DECLARE_RWSEM(companions_rwsem);
 31
 32#define CL_UHCI		PCI_CLASS_SERIAL_USB_UHCI
 33#define CL_OHCI		PCI_CLASS_SERIAL_USB_OHCI
 34#define CL_EHCI		PCI_CLASS_SERIAL_USB_EHCI
 35
 36static inline int is_ohci_or_uhci(struct pci_dev *pdev)
 37{
 38	return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
 39}
 40
 41typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
 42		struct pci_dev *companion, struct usb_hcd *companion_hcd);
 43
 44/* Iterate over PCI devices in the same slot as pdev and call fn for each */
 45static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
 46		companion_fn fn)
 47{
 48	struct pci_dev		*companion;
 49	struct usb_hcd		*companion_hcd;
 50	unsigned int		slot = PCI_SLOT(pdev->devfn);
 51
 52	/*
 53	 * Iterate through other PCI functions in the same slot.
 54	 * If the function's drvdata isn't set then it isn't bound to
 55	 * a USB host controller driver, so skip it.
 56	 */
 57	companion = NULL;
 58	for_each_pci_dev(companion) {
 59		if (companion->bus != pdev->bus ||
 60				PCI_SLOT(companion->devfn) != slot)
 61			continue;
 62
 63		/*
 64		 * Companion device should be either UHCI,OHCI or EHCI host
 65		 * controller, otherwise skip.
 66		 */
 67		if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
 68				companion->class != CL_EHCI)
 69			continue;
 70
 71		companion_hcd = pci_get_drvdata(companion);
 72		if (!companion_hcd || !companion_hcd->self.root_hub)
 73			continue;
 74		fn(pdev, hcd, companion, companion_hcd);
 75	}
 76}
 77
 78/*
 79 * We're about to add an EHCI controller, which will unceremoniously grab
 80 * all the port connections away from its companions.  To prevent annoying
 81 * error messages, lock the companion's root hub and gracefully unconfigure
 82 * it beforehand.  Leave it locked until the EHCI controller is all set.
 83 */
 84static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
 85		struct pci_dev *companion, struct usb_hcd *companion_hcd)
 86{
 87	struct usb_device *udev;
 88
 89	if (is_ohci_or_uhci(companion)) {
 90		udev = companion_hcd->self.root_hub;
 91		usb_lock_device(udev);
 92		usb_set_configuration(udev, 0);
 93	}
 94}
 95
 96/*
 97 * Adding the EHCI controller has either succeeded or failed.  Set the
 98 * companion pointer accordingly, and in either case, reconfigure and
 99 * unlock the root hub.
100 */
101static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
102		struct pci_dev *companion, struct usb_hcd *companion_hcd)
103{
104	struct usb_device *udev;
105
106	if (is_ohci_or_uhci(companion)) {
107		if (dev_get_drvdata(&pdev->dev)) {	/* Succeeded */
108			dev_dbg(&pdev->dev, "HS companion for %s\n",
109					dev_name(&companion->dev));
110			companion_hcd->self.hs_companion = &hcd->self;
111		}
112		udev = companion_hcd->self.root_hub;
113		usb_set_configuration(udev, 1);
114		usb_unlock_device(udev);
115	}
116}
117
118/*
119 * We just added a non-EHCI controller.  Find the EHCI controller to
120 * which it is a companion, and store a pointer to the bus structure.
121 */
122static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
123		struct pci_dev *companion, struct usb_hcd *companion_hcd)
124{
125	if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
126		dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
127				dev_name(&companion->dev));
128		hcd->self.hs_companion = &companion_hcd->self;
129	}
130}
131
132/* We are removing an EHCI controller.  Clear the companions' pointers. */
133static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
134		struct pci_dev *companion, struct usb_hcd *companion_hcd)
135{
136	if (is_ohci_or_uhci(companion))
137		companion_hcd->self.hs_companion = NULL;
138}
139
140#ifdef	CONFIG_PM
141
142/* An EHCI controller must wait for its companions before resuming. */
143static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
144		struct pci_dev *companion, struct usb_hcd *companion_hcd)
145{
146	if (is_ohci_or_uhci(companion))
147		device_pm_wait_for_dev(&pdev->dev, &companion->dev);
148}
149
150#endif	/* CONFIG_PM */
151
152/*-------------------------------------------------------------------------*/
153
154/* configure so an HC device and id are always provided */
155/* always called with process context; sleeping is OK */
156
157/**
158 * usb_hcd_pci_probe - initialize PCI-based HCDs
159 * @dev: USB Host Controller being probed
160 * @driver: USB HC driver handle
161 *
162 * Context: task context, might sleep
163 *
164 * Allocates basic PCI resources for this USB host controller, and
165 * then invokes the start() method for the HCD associated with it
166 * through the hotplug entry's driver_data.
167 *
168 * Store this function in the HCD's struct pci_driver as probe().
169 *
170 * Return: 0 if successful.
171 */
172int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
173{
174	struct usb_hcd		*hcd;
175	int			retval;
176	int			hcd_irq = 0;
177
178	if (usb_disabled())
179		return -ENODEV;
180
181	if (!driver)
182		return -EINVAL;
183
184	if (pci_enable_device(dev) < 0)
185		return -ENODEV;
186
187	/*
188	 * The xHCI driver has its own irq management
189	 * make sure irq setup is not touched for xhci in generic hcd code
190	 */
191	if ((driver->flags & HCD_MASK) < HCD_USB3) {
192		retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSI);
 
193		if (retval < 0) {
194			dev_err(&dev->dev,
195			"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
196				pci_name(dev));
197			retval = -ENODEV;
198			goto disable_pci;
199		}
200		hcd_irq = pci_irq_vector(dev, 0);
201	}
202
203	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
204	if (!hcd) {
205		retval = -ENOMEM;
206		goto free_irq_vectors;
207	}
208
209	hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
210			driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
211
212	if (driver->flags & HCD_MEMORY) {
213		/* EHCI, OHCI */
214		hcd->rsrc_start = pci_resource_start(dev, 0);
215		hcd->rsrc_len = pci_resource_len(dev, 0);
216		if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start,
217				hcd->rsrc_len, driver->description)) {
218			dev_dbg(&dev->dev, "controller already in use\n");
219			retval = -EBUSY;
220			goto put_hcd;
221		}
222		hcd->regs = devm_ioremap(&dev->dev, hcd->rsrc_start,
223				hcd->rsrc_len);
224		if (hcd->regs == NULL) {
225			dev_dbg(&dev->dev, "error mapping memory\n");
226			retval = -EFAULT;
227			goto put_hcd;
228		}
229
230	} else {
231		/* UHCI */
232		int	region;
233
234		for (region = 0; region < PCI_STD_NUM_BARS; region++) {
235			if (!(pci_resource_flags(dev, region) &
236					IORESOURCE_IO))
237				continue;
238
239			hcd->rsrc_start = pci_resource_start(dev, region);
240			hcd->rsrc_len = pci_resource_len(dev, region);
241			if (devm_request_region(&dev->dev, hcd->rsrc_start,
242					hcd->rsrc_len, driver->description))
243				break;
244		}
245		if (region == PCI_STD_NUM_BARS) {
246			dev_dbg(&dev->dev, "no i/o regions available\n");
247			retval = -EBUSY;
248			goto put_hcd;
249		}
250	}
251
252	pci_set_master(dev);
253
254	/* Note: dev_set_drvdata must be called while holding the rwsem */
255	if (dev->class == CL_EHCI) {
256		down_write(&companions_rwsem);
257		dev_set_drvdata(&dev->dev, hcd);
258		for_each_companion(dev, hcd, ehci_pre_add);
259		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
260		if (retval != 0)
261			dev_set_drvdata(&dev->dev, NULL);
262		for_each_companion(dev, hcd, ehci_post_add);
263		up_write(&companions_rwsem);
264	} else {
265		down_read(&companions_rwsem);
266		dev_set_drvdata(&dev->dev, hcd);
267		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
268		if (retval != 0)
269			dev_set_drvdata(&dev->dev, NULL);
270		else
271			for_each_companion(dev, hcd, non_ehci_add);
272		up_read(&companions_rwsem);
273	}
274
275	if (retval != 0)
276		goto put_hcd;
277	device_wakeup_enable(hcd->self.controller);
278
279	if (pci_dev_run_wake(dev))
280		pm_runtime_put_noidle(&dev->dev);
281	return retval;
282
283put_hcd:
284	usb_put_hcd(hcd);
285free_irq_vectors:
286	if ((driver->flags & HCD_MASK) < HCD_USB3)
287		pci_free_irq_vectors(dev);
288disable_pci:
289	pci_disable_device(dev);
290	dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
291	return retval;
292}
293EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
294
295
296/* may be called without controller electrically present */
297/* may be called with controller, bus, and devices active */
298
299/**
300 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
301 * @dev: USB Host Controller being removed
302 *
303 * Context: task context, might sleep
304 *
305 * Reverses the effect of usb_hcd_pci_probe(), first invoking
306 * the HCD's stop() method.  It is always called from a thread
307 * context, normally "rmmod", "apmd", or something similar.
308 *
309 * Store this function in the HCD's struct pci_driver as remove().
310 */
311void usb_hcd_pci_remove(struct pci_dev *dev)
312{
313	struct usb_hcd		*hcd;
314	int			hcd_driver_flags;
315
316	hcd = pci_get_drvdata(dev);
317	if (!hcd)
318		return;
319
320	hcd_driver_flags = hcd->driver->flags;
321
322	if (pci_dev_run_wake(dev))
323		pm_runtime_get_noresume(&dev->dev);
324
325	/* Fake an interrupt request in order to give the driver a chance
326	 * to test whether the controller hardware has been removed (e.g.,
327	 * cardbus physical eject).
328	 */
329	local_irq_disable();
330	usb_hcd_irq(0, hcd);
331	local_irq_enable();
332
333	/* Note: dev_set_drvdata must be called while holding the rwsem */
334	if (dev->class == CL_EHCI) {
335		down_write(&companions_rwsem);
336		for_each_companion(dev, hcd, ehci_remove);
337		usb_remove_hcd(hcd);
338		dev_set_drvdata(&dev->dev, NULL);
339		up_write(&companions_rwsem);
340	} else {
341		/* Not EHCI; just clear the companion pointer */
342		down_read(&companions_rwsem);
343		hcd->self.hs_companion = NULL;
344		usb_remove_hcd(hcd);
345		dev_set_drvdata(&dev->dev, NULL);
346		up_read(&companions_rwsem);
347	}
348	usb_put_hcd(hcd);
349	if ((hcd_driver_flags & HCD_MASK) < HCD_USB3)
350		pci_free_irq_vectors(dev);
351	pci_disable_device(dev);
352}
353EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
354
355/**
356 * usb_hcd_pci_shutdown - shutdown host controller
357 * @dev: USB Host Controller being shutdown
358 */
359void usb_hcd_pci_shutdown(struct pci_dev *dev)
360{
361	struct usb_hcd		*hcd;
362
363	hcd = pci_get_drvdata(dev);
364	if (!hcd)
365		return;
366
367	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
368			hcd->driver->shutdown) {
369		hcd->driver->shutdown(hcd);
370		if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
371			free_irq(hcd->irq, hcd);
372		pci_disable_device(dev);
373	}
374}
375EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
376
377#ifdef	CONFIG_PM
378
379#ifdef	CONFIG_PPC_PMAC
380static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
381{
382	/* Enanble or disable ASIC clocks for USB */
383	if (machine_is(powermac)) {
384		struct device_node	*of_node;
385
386		of_node = pci_device_to_OF_node(pci_dev);
387		if (of_node)
388			pmac_call_feature(PMAC_FTR_USB_ENABLE,
389					of_node, 0, enable);
390	}
391}
392
393#else
394
395static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
396{}
397
398#endif	/* CONFIG_PPC_PMAC */
399
400static int check_root_hub_suspended(struct device *dev)
401{
402	struct usb_hcd		*hcd = dev_get_drvdata(dev);
403
404	if (HCD_RH_RUNNING(hcd)) {
405		dev_warn(dev, "Root hub is not suspended\n");
406		return -EBUSY;
407	}
408	if (hcd->shared_hcd) {
409		hcd = hcd->shared_hcd;
410		if (HCD_RH_RUNNING(hcd)) {
411			dev_warn(dev, "Secondary root hub is not suspended\n");
412			return -EBUSY;
413		}
414	}
415	return 0;
416}
417
418static int suspend_common(struct device *dev, bool do_wakeup)
419{
420	struct pci_dev		*pci_dev = to_pci_dev(dev);
421	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
 
422	int			retval;
423
 
 
424	/* Root hub suspend should have stopped all downstream traffic,
425	 * and all bus master traffic.  And done so for both the interface
426	 * and the stub usb_device (which we check here).  But maybe it
427	 * didn't; writing sysfs power/state files ignores such rules...
428	 */
429	retval = check_root_hub_suspended(dev);
430	if (retval)
431		return retval;
432
433	if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
434		/* Optimization: Don't suspend if a root-hub wakeup is
435		 * pending and it would cause the HCD to wake up anyway.
436		 */
437		if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
438			return -EBUSY;
439		if (do_wakeup && hcd->shared_hcd &&
440				HCD_WAKEUP_PENDING(hcd->shared_hcd))
441			return -EBUSY;
442		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
443		suspend_report_result(dev, hcd->driver->pci_suspend, retval);
444
445		/* Check again in case wakeup raced with pci_suspend */
446		if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
447				(retval == 0 && do_wakeup && hcd->shared_hcd &&
448				 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
449			if (hcd->driver->pci_resume)
450				hcd->driver->pci_resume(hcd, false);
451			retval = -EBUSY;
452		}
453		if (retval)
454			return retval;
455	}
456
457	/* If MSI-X is enabled, the driver will have synchronized all vectors
458	 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
459	 * synchronized here.
460	 */
461	if (!hcd->msix_enabled)
462		synchronize_irq(pci_irq_vector(pci_dev, 0));
463
464	/* Downstream ports from this root hub should already be quiesced, so
465	 * there will be no DMA activity.  Now we can shut down the upstream
466	 * link (except maybe for PME# resume signaling).  We'll enter a
467	 * low power state during suspend_noirq, if the hardware allows.
468	 */
469	pci_disable_device(pci_dev);
470	return retval;
471}
472
473static int resume_common(struct device *dev, int event)
474{
475	struct pci_dev		*pci_dev = to_pci_dev(dev);
476	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
477	int			retval;
478
479	if (HCD_RH_RUNNING(hcd) ||
480			(hcd->shared_hcd &&
481			 HCD_RH_RUNNING(hcd->shared_hcd))) {
482		dev_dbg(dev, "can't resume, not suspended!\n");
483		return 0;
484	}
485
486	retval = pci_enable_device(pci_dev);
487	if (retval < 0) {
488		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
489		return retval;
490	}
491
492	pci_set_master(pci_dev);
493
494	if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
495
496		/*
497		 * Only EHCI controllers have to wait for their companions.
498		 * No locking is needed because PCI controller drivers do not
499		 * get unbound during system resume.
500		 */
501		if (pci_dev->class == CL_EHCI && event != PM_EVENT_AUTO_RESUME)
502			for_each_companion(pci_dev, hcd,
503					ehci_wait_for_companions);
504
505		retval = hcd->driver->pci_resume(hcd,
506				event == PM_EVENT_RESTORE);
507		if (retval) {
508			dev_err(dev, "PCI post-resume error %d!\n", retval);
509			usb_hc_died(hcd);
510		}
511	}
512	return retval;
513}
514
515#ifdef	CONFIG_PM_SLEEP
516
517static int hcd_pci_suspend(struct device *dev)
518{
519	return suspend_common(dev, device_may_wakeup(dev));
520}
521
522static int hcd_pci_suspend_noirq(struct device *dev)
523{
524	struct pci_dev		*pci_dev = to_pci_dev(dev);
525	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
526	int			retval;
527
528	retval = check_root_hub_suspended(dev);
529	if (retval)
530		return retval;
531
532	pci_save_state(pci_dev);
533
534	/* If the root hub is dead rather than suspended, disallow remote
535	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
536	 * dying, so we only need to check the primary roothub.
537	 */
538	if (HCD_DEAD(hcd))
539		device_set_wakeup_enable(dev, 0);
540	dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
541
542	/* Possibly enable remote wakeup,
543	 * choose the appropriate low-power state, and go to that state.
544	 */
545	retval = pci_prepare_to_sleep(pci_dev);
546	if (retval == -EIO) {		/* Low-power not supported */
547		dev_dbg(dev, "--> PCI D0 legacy\n");
548		retval = 0;
549	} else if (retval == 0) {
550		dev_dbg(dev, "--> PCI %s\n",
551				pci_power_name(pci_dev->current_state));
552	} else {
553		suspend_report_result(dev, pci_prepare_to_sleep, retval);
554		return retval;
555	}
556
557	powermac_set_asic(pci_dev, 0);
558	return retval;
559}
560
561static int hcd_pci_poweroff_late(struct device *dev)
562{
563	struct pci_dev		*pci_dev = to_pci_dev(dev);
564	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
565
566	if (hcd->driver->pci_poweroff_late && !HCD_DEAD(hcd))
567		return hcd->driver->pci_poweroff_late(hcd, device_may_wakeup(dev));
568
569	return 0;
570}
571
572static int hcd_pci_resume_noirq(struct device *dev)
573{
574	powermac_set_asic(to_pci_dev(dev), 1);
575	return 0;
576}
577
578static int hcd_pci_resume(struct device *dev)
579{
580	return resume_common(dev, PM_EVENT_RESUME);
581}
582
583static int hcd_pci_restore(struct device *dev)
584{
585	return resume_common(dev, PM_EVENT_RESTORE);
586}
587
588#else
589
590#define hcd_pci_suspend		NULL
591#define hcd_pci_suspend_noirq	NULL
592#define hcd_pci_poweroff_late	NULL
593#define hcd_pci_resume_noirq	NULL
594#define hcd_pci_resume		NULL
595#define hcd_pci_restore		NULL
596
597#endif	/* CONFIG_PM_SLEEP */
598
599static int hcd_pci_runtime_suspend(struct device *dev)
600{
601	int	retval;
602
603	retval = suspend_common(dev, true);
604	if (retval == 0)
605		powermac_set_asic(to_pci_dev(dev), 0);
606	dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
607	return retval;
608}
609
610static int hcd_pci_runtime_resume(struct device *dev)
611{
612	int	retval;
613
614	powermac_set_asic(to_pci_dev(dev), 1);
615	retval = resume_common(dev, PM_EVENT_AUTO_RESUME);
616	dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
617	return retval;
618}
619
620const struct dev_pm_ops usb_hcd_pci_pm_ops = {
621	.suspend	= hcd_pci_suspend,
622	.suspend_noirq	= hcd_pci_suspend_noirq,
623	.resume_noirq	= hcd_pci_resume_noirq,
624	.resume		= hcd_pci_resume,
625	.freeze		= hcd_pci_suspend,
626	.freeze_noirq	= check_root_hub_suspended,
627	.thaw_noirq	= NULL,
628	.thaw		= hcd_pci_resume,
629	.poweroff	= hcd_pci_suspend,
630	.poweroff_late	= hcd_pci_poweroff_late,
631	.poweroff_noirq	= hcd_pci_suspend_noirq,
632	.restore_noirq	= hcd_pci_resume_noirq,
633	.restore	= hcd_pci_restore,
634	.runtime_suspend = hcd_pci_runtime_suspend,
635	.runtime_resume	= hcd_pci_runtime_resume,
636};
637EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
638
639#endif	/* CONFIG_PM */
v6.13.7
  1// SPDX-License-Identifier: GPL-2.0+
  2/*
  3 * (C) Copyright David Brownell 2000-2002
  4 */
  5
  6#include <linux/kernel.h>
  7#include <linux/module.h>
  8#include <linux/pci.h>
  9#include <linux/usb.h>
 10#include <linux/usb/hcd.h>
 11
 12#include <asm/io.h>
 13#include <asm/irq.h>
 14
 15#ifdef CONFIG_PPC_PMAC
 16#include <asm/machdep.h>
 17#include <asm/pmac_feature.h>
 18#endif
 19
 20#include "usb.h"
 21
 22
 23/* PCI-based HCs are common, but plenty of non-PCI HCs are used too */
 24
 25/*
 26 * Coordinate handoffs between EHCI and companion controllers
 27 * during EHCI probing and system resume.
 28 */
 29
 30static DECLARE_RWSEM(companions_rwsem);
 31
 32#define CL_UHCI		PCI_CLASS_SERIAL_USB_UHCI
 33#define CL_OHCI		PCI_CLASS_SERIAL_USB_OHCI
 34#define CL_EHCI		PCI_CLASS_SERIAL_USB_EHCI
 35
 36static inline int is_ohci_or_uhci(struct pci_dev *pdev)
 37{
 38	return pdev->class == CL_OHCI || pdev->class == CL_UHCI;
 39}
 40
 41typedef void (*companion_fn)(struct pci_dev *pdev, struct usb_hcd *hcd,
 42		struct pci_dev *companion, struct usb_hcd *companion_hcd);
 43
 44/* Iterate over PCI devices in the same slot as pdev and call fn for each */
 45static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
 46		companion_fn fn)
 47{
 48	struct pci_dev		*companion;
 49	struct usb_hcd		*companion_hcd;
 50	unsigned int		slot = PCI_SLOT(pdev->devfn);
 51
 52	/*
 53	 * Iterate through other PCI functions in the same slot.
 54	 * If the function's drvdata isn't set then it isn't bound to
 55	 * a USB host controller driver, so skip it.
 56	 */
 57	companion = NULL;
 58	for_each_pci_dev(companion) {
 59		if (companion->bus != pdev->bus ||
 60				PCI_SLOT(companion->devfn) != slot)
 61			continue;
 62
 63		/*
 64		 * Companion device should be either UHCI,OHCI or EHCI host
 65		 * controller, otherwise skip.
 66		 */
 67		if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
 68				companion->class != CL_EHCI)
 69			continue;
 70
 71		companion_hcd = pci_get_drvdata(companion);
 72		if (!companion_hcd || !companion_hcd->self.root_hub)
 73			continue;
 74		fn(pdev, hcd, companion, companion_hcd);
 75	}
 76}
 77
 78/*
 79 * We're about to add an EHCI controller, which will unceremoniously grab
 80 * all the port connections away from its companions.  To prevent annoying
 81 * error messages, lock the companion's root hub and gracefully unconfigure
 82 * it beforehand.  Leave it locked until the EHCI controller is all set.
 83 */
 84static void ehci_pre_add(struct pci_dev *pdev, struct usb_hcd *hcd,
 85		struct pci_dev *companion, struct usb_hcd *companion_hcd)
 86{
 87	struct usb_device *udev;
 88
 89	if (is_ohci_or_uhci(companion)) {
 90		udev = companion_hcd->self.root_hub;
 91		usb_lock_device(udev);
 92		usb_set_configuration(udev, 0);
 93	}
 94}
 95
 96/*
 97 * Adding the EHCI controller has either succeeded or failed.  Set the
 98 * companion pointer accordingly, and in either case, reconfigure and
 99 * unlock the root hub.
100 */
101static void ehci_post_add(struct pci_dev *pdev, struct usb_hcd *hcd,
102		struct pci_dev *companion, struct usb_hcd *companion_hcd)
103{
104	struct usb_device *udev;
105
106	if (is_ohci_or_uhci(companion)) {
107		if (dev_get_drvdata(&pdev->dev)) {	/* Succeeded */
108			dev_dbg(&pdev->dev, "HS companion for %s\n",
109					dev_name(&companion->dev));
110			companion_hcd->self.hs_companion = &hcd->self;
111		}
112		udev = companion_hcd->self.root_hub;
113		usb_set_configuration(udev, 1);
114		usb_unlock_device(udev);
115	}
116}
117
118/*
119 * We just added a non-EHCI controller.  Find the EHCI controller to
120 * which it is a companion, and store a pointer to the bus structure.
121 */
122static void non_ehci_add(struct pci_dev *pdev, struct usb_hcd *hcd,
123		struct pci_dev *companion, struct usb_hcd *companion_hcd)
124{
125	if (is_ohci_or_uhci(pdev) && companion->class == CL_EHCI) {
126		dev_dbg(&pdev->dev, "FS/LS companion for %s\n",
127				dev_name(&companion->dev));
128		hcd->self.hs_companion = &companion_hcd->self;
129	}
130}
131
132/* We are removing an EHCI controller.  Clear the companions' pointers. */
133static void ehci_remove(struct pci_dev *pdev, struct usb_hcd *hcd,
134		struct pci_dev *companion, struct usb_hcd *companion_hcd)
135{
136	if (is_ohci_or_uhci(companion))
137		companion_hcd->self.hs_companion = NULL;
138}
139
140#ifdef	CONFIG_PM
141
142/* An EHCI controller must wait for its companions before resuming. */
143static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd,
144		struct pci_dev *companion, struct usb_hcd *companion_hcd)
145{
146	if (is_ohci_or_uhci(companion))
147		device_pm_wait_for_dev(&pdev->dev, &companion->dev);
148}
149
150#endif	/* CONFIG_PM */
151
152/*-------------------------------------------------------------------------*/
153
154/* configure so an HC device and id are always provided */
155/* always called with process context; sleeping is OK */
156
157/**
158 * usb_hcd_pci_probe - initialize PCI-based HCDs
159 * @dev: USB Host Controller being probed
160 * @driver: USB HC driver handle
161 *
162 * Context: task context, might sleep
163 *
164 * Allocates basic PCI resources for this USB host controller, and
165 * then invokes the start() method for the HCD associated with it
166 * through the hotplug entry's driver_data.
167 *
168 * Store this function in the HCD's struct pci_driver as probe().
169 *
170 * Return: 0 if successful.
171 */
172int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver)
173{
174	struct usb_hcd		*hcd;
175	int			retval;
176	int			hcd_irq = 0;
177
178	if (usb_disabled())
179		return -ENODEV;
180
181	if (!driver)
182		return -EINVAL;
183
184	if (pci_enable_device(dev) < 0)
185		return -ENODEV;
186
187	/*
188	 * The xHCI driver has its own irq management
189	 * make sure irq setup is not touched for xhci in generic hcd code
190	 */
191	if ((driver->flags & HCD_MASK) < HCD_USB3) {
192		retval = pci_alloc_irq_vectors(dev, 1, 1,
193					       PCI_IRQ_INTX | PCI_IRQ_MSI);
194		if (retval < 0) {
195			dev_err(&dev->dev,
196			"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
197				pci_name(dev));
198			retval = -ENODEV;
199			goto disable_pci;
200		}
201		hcd_irq = pci_irq_vector(dev, 0);
202	}
203
204	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
205	if (!hcd) {
206		retval = -ENOMEM;
207		goto free_irq_vectors;
208	}
209
210	hcd->amd_resume_bug = usb_hcd_amd_resume_bug(dev, driver);
 
211
212	if (driver->flags & HCD_MEMORY) {
213		/* EHCI, OHCI */
214		hcd->rsrc_start = pci_resource_start(dev, 0);
215		hcd->rsrc_len = pci_resource_len(dev, 0);
216		if (!devm_request_mem_region(&dev->dev, hcd->rsrc_start,
217				hcd->rsrc_len, driver->description)) {
218			dev_dbg(&dev->dev, "controller already in use\n");
219			retval = -EBUSY;
220			goto put_hcd;
221		}
222		hcd->regs = devm_ioremap(&dev->dev, hcd->rsrc_start,
223				hcd->rsrc_len);
224		if (hcd->regs == NULL) {
225			dev_dbg(&dev->dev, "error mapping memory\n");
226			retval = -EFAULT;
227			goto put_hcd;
228		}
229
230	} else {
231		/* UHCI */
232		int	region;
233
234		for (region = 0; region < PCI_STD_NUM_BARS; region++) {
235			if (!(pci_resource_flags(dev, region) &
236					IORESOURCE_IO))
237				continue;
238
239			hcd->rsrc_start = pci_resource_start(dev, region);
240			hcd->rsrc_len = pci_resource_len(dev, region);
241			if (devm_request_region(&dev->dev, hcd->rsrc_start,
242					hcd->rsrc_len, driver->description))
243				break;
244		}
245		if (region == PCI_STD_NUM_BARS) {
246			dev_dbg(&dev->dev, "no i/o regions available\n");
247			retval = -EBUSY;
248			goto put_hcd;
249		}
250	}
251
252	pci_set_master(dev);
253
254	/* Note: dev_set_drvdata must be called while holding the rwsem */
255	if (dev->class == CL_EHCI) {
256		down_write(&companions_rwsem);
257		dev_set_drvdata(&dev->dev, hcd);
258		for_each_companion(dev, hcd, ehci_pre_add);
259		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
260		if (retval != 0)
261			dev_set_drvdata(&dev->dev, NULL);
262		for_each_companion(dev, hcd, ehci_post_add);
263		up_write(&companions_rwsem);
264	} else {
265		down_read(&companions_rwsem);
266		dev_set_drvdata(&dev->dev, hcd);
267		retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
268		if (retval != 0)
269			dev_set_drvdata(&dev->dev, NULL);
270		else
271			for_each_companion(dev, hcd, non_ehci_add);
272		up_read(&companions_rwsem);
273	}
274
275	if (retval != 0)
276		goto put_hcd;
277	device_wakeup_enable(hcd->self.controller);
278
279	if (pci_dev_run_wake(dev))
280		pm_runtime_put_noidle(&dev->dev);
281	return retval;
282
283put_hcd:
284	usb_put_hcd(hcd);
285free_irq_vectors:
286	if ((driver->flags & HCD_MASK) < HCD_USB3)
287		pci_free_irq_vectors(dev);
288disable_pci:
289	pci_disable_device(dev);
290	dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval);
291	return retval;
292}
293EXPORT_SYMBOL_GPL(usb_hcd_pci_probe);
294
295
296/* may be called without controller electrically present */
297/* may be called with controller, bus, and devices active */
298
299/**
300 * usb_hcd_pci_remove - shutdown processing for PCI-based HCDs
301 * @dev: USB Host Controller being removed
302 *
303 * Context: task context, might sleep
304 *
305 * Reverses the effect of usb_hcd_pci_probe(), first invoking
306 * the HCD's stop() method.  It is always called from a thread
307 * context, normally "rmmod", "apmd", or something similar.
308 *
309 * Store this function in the HCD's struct pci_driver as remove().
310 */
311void usb_hcd_pci_remove(struct pci_dev *dev)
312{
313	struct usb_hcd		*hcd;
314	int			hcd_driver_flags;
315
316	hcd = pci_get_drvdata(dev);
317	if (!hcd)
318		return;
319
320	hcd_driver_flags = hcd->driver->flags;
321
322	if (pci_dev_run_wake(dev))
323		pm_runtime_get_noresume(&dev->dev);
324
325	/* Fake an interrupt request in order to give the driver a chance
326	 * to test whether the controller hardware has been removed (e.g.,
327	 * cardbus physical eject).
328	 */
329	local_irq_disable();
330	usb_hcd_irq(0, hcd);
331	local_irq_enable();
332
333	/* Note: dev_set_drvdata must be called while holding the rwsem */
334	if (dev->class == CL_EHCI) {
335		down_write(&companions_rwsem);
336		for_each_companion(dev, hcd, ehci_remove);
337		usb_remove_hcd(hcd);
338		dev_set_drvdata(&dev->dev, NULL);
339		up_write(&companions_rwsem);
340	} else {
341		/* Not EHCI; just clear the companion pointer */
342		down_read(&companions_rwsem);
343		hcd->self.hs_companion = NULL;
344		usb_remove_hcd(hcd);
345		dev_set_drvdata(&dev->dev, NULL);
346		up_read(&companions_rwsem);
347	}
348	usb_put_hcd(hcd);
349	if ((hcd_driver_flags & HCD_MASK) < HCD_USB3)
350		pci_free_irq_vectors(dev);
351	pci_disable_device(dev);
352}
353EXPORT_SYMBOL_GPL(usb_hcd_pci_remove);
354
355/**
356 * usb_hcd_pci_shutdown - shutdown host controller
357 * @dev: USB Host Controller being shutdown
358 */
359void usb_hcd_pci_shutdown(struct pci_dev *dev)
360{
361	struct usb_hcd		*hcd;
362
363	hcd = pci_get_drvdata(dev);
364	if (!hcd)
365		return;
366
367	if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) &&
368			hcd->driver->shutdown) {
369		hcd->driver->shutdown(hcd);
370		if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
371			free_irq(hcd->irq, hcd);
372		pci_disable_device(dev);
373	}
374}
375EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown);
376
377#ifdef	CONFIG_PM
378
379#ifdef	CONFIG_PPC_PMAC
380static void powermac_set_asic(struct pci_dev *pci_dev, int enable)
381{
382	/* Enanble or disable ASIC clocks for USB */
383	if (machine_is(powermac)) {
384		struct device_node	*of_node;
385
386		of_node = pci_device_to_OF_node(pci_dev);
387		if (of_node)
388			pmac_call_feature(PMAC_FTR_USB_ENABLE,
389					of_node, 0, enable);
390	}
391}
392
393#else
394
395static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable)
396{}
397
398#endif	/* CONFIG_PPC_PMAC */
399
400static int check_root_hub_suspended(struct device *dev)
401{
402	struct usb_hcd		*hcd = dev_get_drvdata(dev);
403
404	if (HCD_RH_RUNNING(hcd)) {
405		dev_warn(dev, "Root hub is not suspended\n");
406		return -EBUSY;
407	}
408	if (hcd->shared_hcd) {
409		hcd = hcd->shared_hcd;
410		if (HCD_RH_RUNNING(hcd)) {
411			dev_warn(dev, "Secondary root hub is not suspended\n");
412			return -EBUSY;
413		}
414	}
415	return 0;
416}
417
418static int suspend_common(struct device *dev, pm_message_t msg)
419{
420	struct pci_dev		*pci_dev = to_pci_dev(dev);
421	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
422	bool			do_wakeup;
423	int			retval;
424
425	do_wakeup = PMSG_IS_AUTO(msg) ? true : device_may_wakeup(dev);
426
427	/* Root hub suspend should have stopped all downstream traffic,
428	 * and all bus master traffic.  And done so for both the interface
429	 * and the stub usb_device (which we check here).  But maybe it
430	 * didn't; writing sysfs power/state files ignores such rules...
431	 */
432	retval = check_root_hub_suspended(dev);
433	if (retval)
434		return retval;
435
436	if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
437		/* Optimization: Don't suspend if a root-hub wakeup is
438		 * pending and it would cause the HCD to wake up anyway.
439		 */
440		if (do_wakeup && HCD_WAKEUP_PENDING(hcd))
441			return -EBUSY;
442		if (do_wakeup && hcd->shared_hcd &&
443				HCD_WAKEUP_PENDING(hcd->shared_hcd))
444			return -EBUSY;
445		retval = hcd->driver->pci_suspend(hcd, do_wakeup);
446		suspend_report_result(dev, hcd->driver->pci_suspend, retval);
447
448		/* Check again in case wakeup raced with pci_suspend */
449		if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) ||
450				(retval == 0 && do_wakeup && hcd->shared_hcd &&
451				 HCD_WAKEUP_PENDING(hcd->shared_hcd))) {
452			if (hcd->driver->pci_resume)
453				hcd->driver->pci_resume(hcd, msg);
454			retval = -EBUSY;
455		}
456		if (retval)
457			return retval;
458	}
459
460	/* If MSI-X is enabled, the driver will have synchronized all vectors
461	 * in pci_suspend(). If MSI or legacy PCI is enabled, that will be
462	 * synchronized here.
463	 */
464	if (!hcd->msix_enabled)
465		synchronize_irq(pci_irq_vector(pci_dev, 0));
466
467	/* Downstream ports from this root hub should already be quiesced, so
468	 * there will be no DMA activity.  Now we can shut down the upstream
469	 * link (except maybe for PME# resume signaling).  We'll enter a
470	 * low power state during suspend_noirq, if the hardware allows.
471	 */
472	pci_disable_device(pci_dev);
473	return retval;
474}
475
476static int resume_common(struct device *dev, pm_message_t msg)
477{
478	struct pci_dev		*pci_dev = to_pci_dev(dev);
479	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
480	int			retval;
481
482	if (HCD_RH_RUNNING(hcd) ||
483			(hcd->shared_hcd &&
484			 HCD_RH_RUNNING(hcd->shared_hcd))) {
485		dev_dbg(dev, "can't resume, not suspended!\n");
486		return 0;
487	}
488
489	retval = pci_enable_device(pci_dev);
490	if (retval < 0) {
491		dev_err(dev, "can't re-enable after resume, %d!\n", retval);
492		return retval;
493	}
494
495	pci_set_master(pci_dev);
496
497	if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
498
499		/*
500		 * Only EHCI controllers have to wait for their companions.
501		 * No locking is needed because PCI controller drivers do not
502		 * get unbound during system resume.
503		 */
504		if (pci_dev->class == CL_EHCI && msg.event != PM_EVENT_AUTO_RESUME)
505			for_each_companion(pci_dev, hcd,
506					ehci_wait_for_companions);
507
508		retval = hcd->driver->pci_resume(hcd, msg);
 
509		if (retval) {
510			dev_err(dev, "PCI post-resume error %d!\n", retval);
511			usb_hc_died(hcd);
512		}
513	}
514	return retval;
515}
516
517#ifdef	CONFIG_PM_SLEEP
518
519static int hcd_pci_suspend(struct device *dev)
520{
521	return suspend_common(dev, PMSG_SUSPEND);
522}
523
524static int hcd_pci_suspend_noirq(struct device *dev)
525{
526	struct pci_dev		*pci_dev = to_pci_dev(dev);
527	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
528	int			retval;
529
530	retval = check_root_hub_suspended(dev);
531	if (retval)
532		return retval;
533
534	pci_save_state(pci_dev);
535
536	/* If the root hub is dead rather than suspended, disallow remote
537	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
538	 * dying, so we only need to check the primary roothub.
539	 */
540	if (HCD_DEAD(hcd))
541		device_set_wakeup_enable(dev, 0);
542	dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
543
544	/* Possibly enable remote wakeup,
545	 * choose the appropriate low-power state, and go to that state.
546	 */
547	retval = pci_prepare_to_sleep(pci_dev);
548	if (retval == -EIO) {		/* Low-power not supported */
549		dev_dbg(dev, "--> PCI D0 legacy\n");
550		retval = 0;
551	} else if (retval == 0) {
552		dev_dbg(dev, "--> PCI %s\n",
553				pci_power_name(pci_dev->current_state));
554	} else {
555		suspend_report_result(dev, pci_prepare_to_sleep, retval);
556		return retval;
557	}
558
559	powermac_set_asic(pci_dev, 0);
560	return retval;
561}
562
563static int hcd_pci_poweroff_late(struct device *dev)
564{
565	struct pci_dev		*pci_dev = to_pci_dev(dev);
566	struct usb_hcd		*hcd = pci_get_drvdata(pci_dev);
567
568	if (hcd->driver->pci_poweroff_late && !HCD_DEAD(hcd))
569		return hcd->driver->pci_poweroff_late(hcd, device_may_wakeup(dev));
570
571	return 0;
572}
573
574static int hcd_pci_resume_noirq(struct device *dev)
575{
576	powermac_set_asic(to_pci_dev(dev), 1);
577	return 0;
578}
579
580static int hcd_pci_resume(struct device *dev)
581{
582	return resume_common(dev, PMSG_RESUME);
583}
584
585static int hcd_pci_restore(struct device *dev)
586{
587	return resume_common(dev, PMSG_RESTORE);
588}
589
590#else
591
592#define hcd_pci_suspend		NULL
593#define hcd_pci_suspend_noirq	NULL
594#define hcd_pci_poweroff_late	NULL
595#define hcd_pci_resume_noirq	NULL
596#define hcd_pci_resume		NULL
597#define hcd_pci_restore		NULL
598
599#endif	/* CONFIG_PM_SLEEP */
600
601static int hcd_pci_runtime_suspend(struct device *dev)
602{
603	int	retval;
604
605	retval = suspend_common(dev, PMSG_AUTO_SUSPEND);
606	if (retval == 0)
607		powermac_set_asic(to_pci_dev(dev), 0);
608	dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval);
609	return retval;
610}
611
612static int hcd_pci_runtime_resume(struct device *dev)
613{
614	int	retval;
615
616	powermac_set_asic(to_pci_dev(dev), 1);
617	retval = resume_common(dev, PMSG_AUTO_RESUME);
618	dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval);
619	return retval;
620}
621
622const struct dev_pm_ops usb_hcd_pci_pm_ops = {
623	.suspend	= hcd_pci_suspend,
624	.suspend_noirq	= hcd_pci_suspend_noirq,
625	.resume_noirq	= hcd_pci_resume_noirq,
626	.resume		= hcd_pci_resume,
627	.freeze		= hcd_pci_suspend,
628	.freeze_noirq	= check_root_hub_suspended,
629	.thaw_noirq	= NULL,
630	.thaw		= hcd_pci_resume,
631	.poweroff	= hcd_pci_suspend,
632	.poweroff_late	= hcd_pci_poweroff_late,
633	.poweroff_noirq	= hcd_pci_suspend_noirq,
634	.restore_noirq	= hcd_pci_resume_noirq,
635	.restore	= hcd_pci_restore,
636	.runtime_suspend = hcd_pci_runtime_suspend,
637	.runtime_resume	= hcd_pci_runtime_resume,
638};
639EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops);
640
641#endif	/* CONFIG_PM */