1// SPDX-License-Identifier: GPL-2.0-only
 2/*
 3 * Copyright 2013 Pavel Machek <pavel@denx.de>
 4 */
 5
 6/dts-v1/;
 7#include "imx6q.dtsi"
 8
 9/ {
10	model = "MicroSys sbc6x board";
11	compatible = "microsys,sbc6x", "fsl,imx6q";
12
13	memory@10000000 {
14		device_type = "memory";
15		reg = <0x10000000 0x80000000>;
16	};
17};
18
19
20&fec {
21	pinctrl-names = "default";
22	pinctrl-0 = <&pinctrl_enet>;
23	phy-mode = "rgmii";
24	status = "okay";
25};
26
27&iomuxc {
28	pinctrl_enet: enetgrp {
29		fsl,pins = <
30			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
31			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
32			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
33			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
34			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
35			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
36			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
37			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
38			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
39			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
40			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
41			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
42			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
43			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
44			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
45			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
46		>;
47	};
48
49	pinctrl_uart1: uart1grp {
50		fsl,pins = <
51			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
52			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
53		>;
54	};
55
56	pinctrl_usbotg: usbotggrp {
57		fsl,pins = <
58			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
59		>;
60	};
61
62	pinctrl_usdhc3: usdhc3grp {
63		fsl,pins = <
64			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
65			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
66			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
67			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
68			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
69			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
70		>;
71	};
72};
73
74&uart1 {
75	pinctrl-names = "default";
76	pinctrl-0 = <&pinctrl_uart1>;
77	status = "okay";
78};
79
80&usbotg {
81	pinctrl-names = "default";
82	pinctrl-0 = <&pinctrl_usbotg>;
83	disable-over-current;
84	status = "okay";
85};
86
87&usdhc3 {
88	pinctrl-names = "default";
89	pinctrl-0 = <&pinctrl_usdhc3>;
90	status = "okay";
91};