Loading...
1/*
2 * linux/drivers/message/fusion/mptscsih.c
3 * For use with LSI PCI chip/adapter(s)
4 * running LSI Fusion MPT (Message Passing Technology) firmware.
5 *
6 * Copyright (c) 1999-2008 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
8 *
9 */
10/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11/*
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; version 2 of the License.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 NO WARRANTY
22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26 solely responsible for determining the appropriateness of using and
27 distributing the Program and assumes all risks associated with its
28 exercise of rights under this Agreement, including but not limited to
29 the risks and costs of program errors, damage to or loss of data,
30 programs or equipment, and unavailability or interruption of operations.
31
32 DISCLAIMER OF LIABILITY
33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40
41 You should have received a copy of the GNU General Public License
42 along with this program; if not, write to the Free Software
43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
44*/
45/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46
47#include <linux/module.h>
48#include <linux/kernel.h>
49#include <linux/slab.h>
50#include <linux/init.h>
51#include <linux/errno.h>
52#include <linux/kdev_t.h>
53#include <linux/blkdev.h>
54#include <linux/delay.h> /* for mdelay */
55#include <linux/interrupt.h>
56#include <linux/reboot.h> /* notifier code */
57#include <linux/workqueue.h>
58
59#include <scsi/scsi.h>
60#include <scsi/scsi_cmnd.h>
61#include <scsi/scsi_device.h>
62#include <scsi/scsi_host.h>
63#include <scsi/scsi_tcq.h>
64#include <scsi/scsi_dbg.h>
65
66#include "mptbase.h"
67#include "mptscsih.h"
68#include "lsi/mpi_log_sas.h"
69
70/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
71#define my_NAME "Fusion MPT SCSI Host driver"
72#define my_VERSION MPT_LINUX_VERSION_COMMON
73#define MYNAM "mptscsih"
74
75MODULE_AUTHOR(MODULEAUTHOR);
76MODULE_DESCRIPTION(my_NAME);
77MODULE_LICENSE("GPL");
78MODULE_VERSION(my_VERSION);
79
80/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
81/*
82 * Other private/forward protos...
83 */
84struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
85static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
86static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
87static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
88int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
89static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
90int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
91
92static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
93 SCSIIORequest_t *pReq, int req_idx);
94static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
95static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
96
97int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
98 u64 lun, int ctx2abort, ulong timeout);
99
100int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
101int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
102
103void
104mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
105static int mptscsih_get_completion_code(MPT_ADAPTER *ioc,
106 MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
107int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
108static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
109static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
110
111static int
112mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
113 SCSITaskMgmtReply_t *pScsiTmReply);
114void mptscsih_remove(struct pci_dev *);
115void mptscsih_shutdown(struct pci_dev *);
116#ifdef CONFIG_PM
117int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
118int mptscsih_resume(struct pci_dev *pdev);
119#endif
120
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * mptscsih_getFreeChainBuffer - Function to get a free chain
125 * from the MPT_SCSI_HOST FreeChainQ.
126 * @ioc: Pointer to MPT_ADAPTER structure
127 * @req_idx: Index of the SCSI IO request frame. (output)
128 *
129 * return SUCCESS or FAILED
130 */
131static inline int
132mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
133{
134 MPT_FRAME_HDR *chainBuf;
135 unsigned long flags;
136 int rc;
137 int chain_idx;
138
139 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
140 ioc->name));
141 spin_lock_irqsave(&ioc->FreeQlock, flags);
142 if (!list_empty(&ioc->FreeChainQ)) {
143 int offset;
144
145 chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
146 u.frame.linkage.list);
147 list_del(&chainBuf->u.frame.linkage.list);
148 offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
149 chain_idx = offset / ioc->req_sz;
150 rc = SUCCESS;
151 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
152 "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
153 ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
154 } else {
155 rc = FAILED;
156 chain_idx = MPT_HOST_NO_CHAIN;
157 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
158 ioc->name));
159 }
160 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
161
162 *retIndex = chain_idx;
163 return rc;
164} /* mptscsih_getFreeChainBuffer() */
165
166/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
167/*
168 * mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
169 * SCSIIORequest_t Message Frame.
170 * @ioc: Pointer to MPT_ADAPTER structure
171 * @SCpnt: Pointer to scsi_cmnd structure
172 * @pReq: Pointer to SCSIIORequest_t structure
173 *
174 * Returns ...
175 */
176static int
177mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
178 SCSIIORequest_t *pReq, int req_idx)
179{
180 char *psge;
181 char *chainSge;
182 struct scatterlist *sg;
183 int frm_sz;
184 int sges_left, sg_done;
185 int chain_idx = MPT_HOST_NO_CHAIN;
186 int sgeOffset;
187 int numSgeSlots, numSgeThisFrame;
188 u32 sgflags, sgdir, thisxfer = 0;
189 int chain_dma_off = 0;
190 int newIndex;
191 int ii;
192 dma_addr_t v2;
193 u32 RequestNB;
194
195 sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
196 if (sgdir == MPI_SCSIIO_CONTROL_WRITE) {
197 sgdir = MPT_TRANSFER_HOST_TO_IOC;
198 } else {
199 sgdir = MPT_TRANSFER_IOC_TO_HOST;
200 }
201
202 psge = (char *) &pReq->SGL;
203 frm_sz = ioc->req_sz;
204
205 /* Map the data portion, if any.
206 * sges_left = 0 if no data transfer.
207 */
208 sges_left = scsi_dma_map(SCpnt);
209 if (sges_left < 0)
210 return FAILED;
211
212 /* Handle the SG case.
213 */
214 sg = scsi_sglist(SCpnt);
215 sg_done = 0;
216 sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
217 chainSge = NULL;
218
219 /* Prior to entering this loop - the following must be set
220 * current MF: sgeOffset (bytes)
221 * chainSge (Null if original MF is not a chain buffer)
222 * sg_done (num SGE done for this MF)
223 */
224
225nextSGEset:
226 numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
227 numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
228
229 sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
230
231 /* Get first (num - 1) SG elements
232 * Skip any SG entries with a length of 0
233 * NOTE: at finish, sg and psge pointed to NEXT data/location positions
234 */
235 for (ii=0; ii < (numSgeThisFrame-1); ii++) {
236 thisxfer = sg_dma_len(sg);
237 if (thisxfer == 0) {
238 /* Get next SG element from the OS */
239 sg = sg_next(sg);
240 sg_done++;
241 continue;
242 }
243
244 v2 = sg_dma_address(sg);
245 ioc->add_sge(psge, sgflags | thisxfer, v2);
246
247 /* Get next SG element from the OS */
248 sg = sg_next(sg);
249 psge += ioc->SGE_size;
250 sgeOffset += ioc->SGE_size;
251 sg_done++;
252 }
253
254 if (numSgeThisFrame == sges_left) {
255 /* Add last element, end of buffer and end of list flags.
256 */
257 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
258 MPT_SGE_FLAGS_END_OF_BUFFER |
259 MPT_SGE_FLAGS_END_OF_LIST;
260
261 /* Add last SGE and set termination flags.
262 * Note: Last SGE may have a length of 0 - which should be ok.
263 */
264 thisxfer = sg_dma_len(sg);
265
266 v2 = sg_dma_address(sg);
267 ioc->add_sge(psge, sgflags | thisxfer, v2);
268 sgeOffset += ioc->SGE_size;
269 sg_done++;
270
271 if (chainSge) {
272 /* The current buffer is a chain buffer,
273 * but there is not another one.
274 * Update the chain element
275 * Offset and Length fields.
276 */
277 ioc->add_chain((char *)chainSge, 0, sgeOffset,
278 ioc->ChainBufferDMA + chain_dma_off);
279 } else {
280 /* The current buffer is the original MF
281 * and there is no Chain buffer.
282 */
283 pReq->ChainOffset = 0;
284 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
285 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
286 "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
287 ioc->RequestNB[req_idx] = RequestNB;
288 }
289 } else {
290 /* At least one chain buffer is needed.
291 * Complete the first MF
292 * - last SGE element, set the LastElement bit
293 * - set ChainOffset (words) for orig MF
294 * (OR finish previous MF chain buffer)
295 * - update MFStructPtr ChainIndex
296 * - Populate chain element
297 * Also
298 * Loop until done.
299 */
300
301 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n",
302 ioc->name, sg_done));
303
304 /* Set LAST_ELEMENT flag for last non-chain element
305 * in the buffer. Since psge points at the NEXT
306 * SGE element, go back one SGE element, update the flags
307 * and reset the pointer. (Note: sgflags & thisxfer are already
308 * set properly).
309 */
310 if (sg_done) {
311 u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
312 sgflags = le32_to_cpu(*ptmp);
313 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
314 *ptmp = cpu_to_le32(sgflags);
315 }
316
317 if (chainSge) {
318 /* The current buffer is a chain buffer.
319 * chainSge points to the previous Chain Element.
320 * Update its chain element Offset and Length (must
321 * include chain element size) fields.
322 * Old chain element is now complete.
323 */
324 u8 nextChain = (u8) (sgeOffset >> 2);
325 sgeOffset += ioc->SGE_size;
326 ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
327 ioc->ChainBufferDMA + chain_dma_off);
328 } else {
329 /* The original MF buffer requires a chain buffer -
330 * set the offset.
331 * Last element in this MF is a chain element.
332 */
333 pReq->ChainOffset = (u8) (sgeOffset >> 2);
334 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
335 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
336 ioc->RequestNB[req_idx] = RequestNB;
337 }
338
339 sges_left -= sg_done;
340
341
342 /* NOTE: psge points to the beginning of the chain element
343 * in current buffer. Get a chain buffer.
344 */
345 if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
346 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
347 "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
348 ioc->name, pReq->CDB[0], SCpnt));
349 return FAILED;
350 }
351
352 /* Update the tracking arrays.
353 * If chainSge == NULL, update ReqToChain, else ChainToChain
354 */
355 if (chainSge) {
356 ioc->ChainToChain[chain_idx] = newIndex;
357 } else {
358 ioc->ReqToChain[req_idx] = newIndex;
359 }
360 chain_idx = newIndex;
361 chain_dma_off = ioc->req_sz * chain_idx;
362
363 /* Populate the chainSGE for the current buffer.
364 * - Set chain buffer pointer to psge and fill
365 * out the Address and Flags fields.
366 */
367 chainSge = (char *) psge;
368 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)",
369 ioc->name, psge, req_idx));
370
371 /* Start the SGE for the next buffer
372 */
373 psge = (char *) (ioc->ChainBuffer + chain_dma_off);
374 sgeOffset = 0;
375 sg_done = 0;
376
377 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n",
378 ioc->name, psge, chain_idx));
379
380 /* Start the SGE for the next buffer
381 */
382
383 goto nextSGEset;
384 }
385
386 return SUCCESS;
387} /* mptscsih_AddSGE() */
388
389static void
390mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
391 U32 SlotStatus)
392{
393 MPT_FRAME_HDR *mf;
394 SEPRequest_t *SEPMsg;
395
396 if (ioc->bus_type != SAS)
397 return;
398
399 /* Not supported for hidden raid components
400 */
401 if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
402 return;
403
404 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
405 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
406 ioc->name,__func__));
407 return;
408 }
409
410 SEPMsg = (SEPRequest_t *)mf;
411 SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
412 SEPMsg->Bus = vtarget->channel;
413 SEPMsg->TargetID = vtarget->id;
414 SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
415 SEPMsg->SlotStatus = SlotStatus;
416 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
417 "Sending SEP cmd=%x channel=%d id=%d\n",
418 ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
419 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
420}
421
422#ifdef CONFIG_FUSION_LOGGING
423/**
424 * mptscsih_info_scsiio - debug print info on reply frame
425 * @ioc: Pointer to MPT_ADAPTER structure
426 * @sc: original scsi cmnd pointer
427 * @pScsiReply: Pointer to MPT reply frame
428 *
429 * MPT_DEBUG_REPLY needs to be enabled to obtain this info
430 *
431 * Refer to lsi/mpi.h.
432 **/
433static void
434mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply)
435{
436 char *desc = NULL;
437 char *desc1 = NULL;
438 u16 ioc_status;
439 u8 skey, asc, ascq;
440
441 ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
442
443 switch (ioc_status) {
444
445 case MPI_IOCSTATUS_SUCCESS:
446 desc = "success";
447 break;
448 case MPI_IOCSTATUS_SCSI_INVALID_BUS:
449 desc = "invalid bus";
450 break;
451 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
452 desc = "invalid target_id";
453 break;
454 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
455 desc = "device not there";
456 break;
457 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
458 desc = "data overrun";
459 break;
460 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
461 desc = "data underrun";
462 break;
463 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
464 desc = "I/O data error";
465 break;
466 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
467 desc = "protocol error";
468 break;
469 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
470 desc = "task terminated";
471 break;
472 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
473 desc = "residual mismatch";
474 break;
475 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
476 desc = "task management failed";
477 break;
478 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
479 desc = "IOC terminated";
480 break;
481 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
482 desc = "ext terminated";
483 break;
484 default:
485 desc = "";
486 break;
487 }
488
489 switch (pScsiReply->SCSIStatus)
490 {
491
492 case MPI_SCSI_STATUS_SUCCESS:
493 desc1 = "success";
494 break;
495 case MPI_SCSI_STATUS_CHECK_CONDITION:
496 desc1 = "check condition";
497 break;
498 case MPI_SCSI_STATUS_CONDITION_MET:
499 desc1 = "condition met";
500 break;
501 case MPI_SCSI_STATUS_BUSY:
502 desc1 = "busy";
503 break;
504 case MPI_SCSI_STATUS_INTERMEDIATE:
505 desc1 = "intermediate";
506 break;
507 case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET:
508 desc1 = "intermediate condmet";
509 break;
510 case MPI_SCSI_STATUS_RESERVATION_CONFLICT:
511 desc1 = "reservation conflict";
512 break;
513 case MPI_SCSI_STATUS_COMMAND_TERMINATED:
514 desc1 = "command terminated";
515 break;
516 case MPI_SCSI_STATUS_TASK_SET_FULL:
517 desc1 = "task set full";
518 break;
519 case MPI_SCSI_STATUS_ACA_ACTIVE:
520 desc1 = "aca active";
521 break;
522 case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT:
523 desc1 = "fcpext device logged out";
524 break;
525 case MPI_SCSI_STATUS_FCPEXT_NO_LINK:
526 desc1 = "fcpext no link";
527 break;
528 case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED:
529 desc1 = "fcpext unassigned";
530 break;
531 default:
532 desc1 = "";
533 break;
534 }
535
536 scsi_print_command(sc);
537 printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n",
538 ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
539 printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
540 "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
541 scsi_get_resid(sc));
542 printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
543 "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
544 le32_to_cpu(pScsiReply->TransferCount), sc->result);
545
546 printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
547 "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
548 ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
549 pScsiReply->SCSIState);
550
551 if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
552 skey = sc->sense_buffer[2] & 0x0F;
553 asc = sc->sense_buffer[12];
554 ascq = sc->sense_buffer[13];
555
556 printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
557 "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq);
558 }
559
560 /*
561 * Look for + dump FCP ResponseInfo[]!
562 */
563 if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
564 pScsiReply->ResponseInfo)
565 printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
566 ioc->name, le32_to_cpu(pScsiReply->ResponseInfo));
567}
568#endif
569
570/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
571/*
572 * mptscsih_io_done - Main SCSI IO callback routine registered to
573 * Fusion MPT (base) driver
574 * @ioc: Pointer to MPT_ADAPTER structure
575 * @mf: Pointer to original MPT request frame
576 * @r: Pointer to MPT reply frame (NULL if TurboReply)
577 *
578 * This routine is called from mpt.c::mpt_interrupt() at the completion
579 * of any SCSI IO request.
580 * This routine is registered with the Fusion MPT (base) driver at driver
581 * load/init time via the mpt_register() API call.
582 *
583 * Returns 1 indicating alloc'd request frame ptr should be freed.
584 */
585int
586mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
587{
588 struct scsi_cmnd *sc;
589 MPT_SCSI_HOST *hd;
590 SCSIIORequest_t *pScsiReq;
591 SCSIIOReply_t *pScsiReply;
592 u16 req_idx, req_idx_MR;
593 VirtDevice *vdevice;
594 VirtTarget *vtarget;
595
596 hd = shost_priv(ioc->sh);
597 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
598 req_idx_MR = (mr != NULL) ?
599 le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
600
601 /* Special case, where already freed message frame is received from
602 * Firmware. It happens with Resetting IOC.
603 * Return immediately. Do not care
604 */
605 if ((req_idx != req_idx_MR) ||
606 (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
607 return 0;
608
609 sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
610 if (sc == NULL) {
611 MPIHeader_t *hdr = (MPIHeader_t *)mf;
612
613 /* Remark: writeSDP1 will use the ScsiDoneCtx
614 * If a SCSI I/O cmd, device disabled by OS and
615 * completion done. Cannot touch sc struct. Just free mem.
616 */
617 if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
618 printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
619 ioc->name);
620
621 mptscsih_freeChainBuffers(ioc, req_idx);
622 return 1;
623 }
624
625 if ((unsigned char *)mf != sc->host_scribble) {
626 mptscsih_freeChainBuffers(ioc, req_idx);
627 return 1;
628 }
629
630 if (ioc->bus_type == SAS) {
631 VirtDevice *vdevice = sc->device->hostdata;
632
633 if (!vdevice || !vdevice->vtarget ||
634 vdevice->vtarget->deleted) {
635 sc->result = DID_NO_CONNECT << 16;
636 goto out;
637 }
638 }
639
640 sc->host_scribble = NULL;
641 sc->result = DID_OK << 16; /* Set default reply as OK */
642 pScsiReq = (SCSIIORequest_t *) mf;
643 pScsiReply = (SCSIIOReply_t *) mr;
644
645 if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
646 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
647 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
648 ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
649 }else{
650 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
651 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
652 ioc->name, mf, mr, sc, req_idx));
653 }
654
655 if (pScsiReply == NULL) {
656 /* special context reply handling */
657 ;
658 } else {
659 u32 xfer_cnt;
660 u16 status;
661 u8 scsi_state, scsi_status;
662 u32 log_info;
663
664 status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
665
666 scsi_state = pScsiReply->SCSIState;
667 scsi_status = pScsiReply->SCSIStatus;
668 xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
669 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
670 log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
671
672 /*
673 * if we get a data underrun indication, yet no data was
674 * transferred and the SCSI status indicates that the
675 * command was never started, change the data underrun
676 * to success
677 */
678 if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
679 (scsi_status == MPI_SCSI_STATUS_BUSY ||
680 scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
681 scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
682 status = MPI_IOCSTATUS_SUCCESS;
683 }
684
685 if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
686 mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
687
688 /*
689 * Look for + dump FCP ResponseInfo[]!
690 */
691 if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
692 pScsiReply->ResponseInfo) {
693 printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] "
694 "FCP_ResponseInfo=%08xh\n", ioc->name,
695 sc->device->host->host_no, sc->device->channel,
696 sc->device->id, sc->device->lun,
697 le32_to_cpu(pScsiReply->ResponseInfo));
698 }
699
700 switch(status) {
701 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
702 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
703 /* CHECKME!
704 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
705 * But not: DID_BUS_BUSY lest one risk
706 * killing interrupt handler:-(
707 */
708 sc->result = SAM_STAT_BUSY;
709 break;
710
711 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
712 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
713 sc->result = DID_BAD_TARGET << 16;
714 break;
715
716 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
717 /* Spoof to SCSI Selection Timeout! */
718 if (ioc->bus_type != FC)
719 sc->result = DID_NO_CONNECT << 16;
720 /* else fibre, just stall until rescan event */
721 else
722 sc->result = DID_REQUEUE << 16;
723
724 if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
725 hd->sel_timeout[pScsiReq->TargetID]++;
726
727 vdevice = sc->device->hostdata;
728 if (!vdevice)
729 break;
730 vtarget = vdevice->vtarget;
731 if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
732 mptscsih_issue_sep_command(ioc, vtarget,
733 MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
734 vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
735 }
736 break;
737
738 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
739 if ( ioc->bus_type == SAS ) {
740 u16 ioc_status =
741 le16_to_cpu(pScsiReply->IOCStatus);
742 if ((ioc_status &
743 MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
744 &&
745 ((log_info & SAS_LOGINFO_MASK) ==
746 SAS_LOGINFO_NEXUS_LOSS)) {
747 VirtDevice *vdevice =
748 sc->device->hostdata;
749
750 /* flag the device as being in
751 * device removal delay so we can
752 * notify the midlayer to hold off
753 * on timeout eh */
754 if (vdevice && vdevice->
755 vtarget &&
756 vdevice->vtarget->
757 raidVolume)
758 printk(KERN_INFO
759 "Skipping Raid Volume"
760 "for inDMD\n");
761 else if (vdevice &&
762 vdevice->vtarget)
763 vdevice->vtarget->
764 inDMD = 1;
765
766 sc->result =
767 (DID_TRANSPORT_DISRUPTED
768 << 16);
769 break;
770 }
771 } else if (ioc->bus_type == FC) {
772 /*
773 * The FC IOC may kill a request for variety of
774 * reasons, some of which may be recovered by a
775 * retry, some which are unlikely to be
776 * recovered. Return DID_ERROR instead of
777 * DID_RESET to permit retry of the command,
778 * just not an infinite number of them
779 */
780 sc->result = DID_ERROR << 16;
781 break;
782 }
783
784 /*
785 * Allow non-SAS & non-NEXUS_LOSS to drop into below code
786 */
787 fallthrough;
788
789 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
790 /* Linux handles an unsolicited DID_RESET better
791 * than an unsolicited DID_ABORT.
792 */
793 sc->result = DID_RESET << 16;
794 break;
795
796 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
797 if (ioc->bus_type == FC)
798 sc->result = DID_ERROR << 16;
799 else
800 sc->result = DID_RESET << 16;
801 break;
802
803 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
804 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
805 if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
806 sc->result=DID_SOFT_ERROR << 16;
807 else /* Sufficient data transfer occurred */
808 sc->result = (DID_OK << 16) | scsi_status;
809 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
810 "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
811 ioc->name, sc->result, sc->device->channel, sc->device->id));
812 break;
813
814 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
815 /*
816 * Do upfront check for valid SenseData and give it
817 * precedence!
818 */
819 sc->result = (DID_OK << 16) | scsi_status;
820 if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
821
822 /*
823 * For an Errata on LSI53C1030
824 * When the length of request data
825 * and transfer data are different
826 * with result of command (READ or VERIFY),
827 * DID_SOFT_ERROR is set.
828 */
829 if (ioc->bus_type == SPI) {
830 if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) ||
831 pScsiReq->CDB[0] == READ_10 ||
832 pScsiReq->CDB[0] == READ_12 ||
833 (pScsiReq->CDB[0] == READ_16 &&
834 ((pScsiReq->CDB[1] & 0x02) == 0)) ||
835 pScsiReq->CDB[0] == VERIFY ||
836 pScsiReq->CDB[0] == VERIFY_16) {
837 if (scsi_bufflen(sc) !=
838 xfer_cnt) {
839 sc->result =
840 DID_SOFT_ERROR << 16;
841 printk(KERN_WARNING "Errata"
842 "on LSI53C1030 occurred."
843 "sc->req_bufflen=0x%02x,"
844 "xfer_cnt=0x%02x\n",
845 scsi_bufflen(sc),
846 xfer_cnt);
847 }
848 }
849 }
850
851 if (xfer_cnt < sc->underflow) {
852 if (scsi_status == SAM_STAT_BUSY)
853 sc->result = SAM_STAT_BUSY;
854 else
855 sc->result = DID_SOFT_ERROR << 16;
856 }
857 if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
858 /* What to do?
859 */
860 sc->result = DID_SOFT_ERROR << 16;
861 }
862 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
863 /* Not real sure here either... */
864 sc->result = DID_RESET << 16;
865 }
866 }
867
868
869 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
870 " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
871 ioc->name, sc->underflow));
872 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
873 " ActBytesXferd=%02xh\n", ioc->name, xfer_cnt));
874
875 /* Report Queue Full
876 */
877 if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
878 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
879
880 break;
881
882 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
883 scsi_set_resid(sc, 0);
884 fallthrough;
885 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
886 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
887 sc->result = (DID_OK << 16) | scsi_status;
888 if (scsi_state == 0) {
889 ;
890 } else if (scsi_state &
891 MPI_SCSI_STATE_AUTOSENSE_VALID) {
892
893 /*
894 * For potential trouble on LSI53C1030.
895 * (date:2007.xx.)
896 * It is checked whether the length of
897 * request data is equal to
898 * the length of transfer and residual.
899 * MEDIUM_ERROR is set by incorrect data.
900 */
901 if ((ioc->bus_type == SPI) &&
902 (sc->sense_buffer[2] & 0x20)) {
903 u32 difftransfer;
904 difftransfer =
905 sc->sense_buffer[3] << 24 |
906 sc->sense_buffer[4] << 16 |
907 sc->sense_buffer[5] << 8 |
908 sc->sense_buffer[6];
909 if (((sc->sense_buffer[3] & 0x80) ==
910 0x80) && (scsi_bufflen(sc)
911 != xfer_cnt)) {
912 sc->sense_buffer[2] =
913 MEDIUM_ERROR;
914 sc->sense_buffer[12] = 0xff;
915 sc->sense_buffer[13] = 0xff;
916 printk(KERN_WARNING"Errata"
917 "on LSI53C1030 occurred."
918 "sc->req_bufflen=0x%02x,"
919 "xfer_cnt=0x%02x\n" ,
920 scsi_bufflen(sc),
921 xfer_cnt);
922 }
923 if (((sc->sense_buffer[3] & 0x80)
924 != 0x80) &&
925 (scsi_bufflen(sc) !=
926 xfer_cnt + difftransfer)) {
927 sc->sense_buffer[2] =
928 MEDIUM_ERROR;
929 sc->sense_buffer[12] = 0xff;
930 sc->sense_buffer[13] = 0xff;
931 printk(KERN_WARNING
932 "Errata on LSI53C1030 occurred"
933 "sc->req_bufflen=0x%02x,"
934 " xfer_cnt=0x%02x,"
935 "difftransfer=0x%02x\n",
936 scsi_bufflen(sc),
937 xfer_cnt,
938 difftransfer);
939 }
940 }
941
942 /*
943 * If running against circa 200003dd 909 MPT f/w,
944 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
945 * (QUEUE_FULL) returned from device! --> get 0x0000?128
946 * and with SenseBytes set to 0.
947 */
948 if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
949 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
950
951 }
952 else if (scsi_state &
953 (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
954 ) {
955 /*
956 * What to do?
957 */
958 sc->result = DID_SOFT_ERROR << 16;
959 }
960 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
961 /* Not real sure here either... */
962 sc->result = DID_RESET << 16;
963 }
964 else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
965 /* Device Inq. data indicates that it supports
966 * QTags, but rejects QTag messages.
967 * This command completed OK.
968 *
969 * Not real sure here either so do nothing... */
970 }
971
972 if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
973 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
974
975 /* Add handling of:
976 * Reservation Conflict, Busy,
977 * Command Terminated, CHECK
978 */
979 break;
980
981 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
982 sc->result = DID_SOFT_ERROR << 16;
983 break;
984
985 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
986 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
987 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
988 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
989 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
990 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
991 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
992 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
993 default:
994 /*
995 * What to do?
996 */
997 sc->result = DID_SOFT_ERROR << 16;
998 break;
999
1000 } /* switch(status) */
1001
1002#ifdef CONFIG_FUSION_LOGGING
1003 if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY))
1004 mptscsih_info_scsiio(ioc, sc, pScsiReply);
1005#endif
1006
1007 } /* end of address reply case */
1008out:
1009 /* Unmap the DMA buffers, if any. */
1010 scsi_dma_unmap(sc);
1011
1012 scsi_done(sc); /* Issue the command callback */
1013
1014 /* Free Chain buffers */
1015 mptscsih_freeChainBuffers(ioc, req_idx);
1016 return 1;
1017}
1018
1019/*
1020 * mptscsih_flush_running_cmds - For each command found, search
1021 * Scsi_Host instance taskQ and reply to OS.
1022 * Called only if recovering from a FW reload.
1023 * @hd: Pointer to a SCSI HOST structure
1024 *
1025 * Returns: None.
1026 *
1027 * Must be called while new I/Os are being queued.
1028 */
1029void
1030mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
1031{
1032 MPT_ADAPTER *ioc = hd->ioc;
1033 struct scsi_cmnd *sc;
1034 SCSIIORequest_t *mf = NULL;
1035 int ii;
1036 int channel, id;
1037
1038 for (ii= 0; ii < ioc->req_depth; ii++) {
1039 sc = mptscsih_getclear_scsi_lookup(ioc, ii);
1040 if (!sc)
1041 continue;
1042 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1043 if (!mf)
1044 continue;
1045 channel = mf->Bus;
1046 id = mf->TargetID;
1047 mptscsih_freeChainBuffers(ioc, ii);
1048 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1049 if ((unsigned char *)mf != sc->host_scribble)
1050 continue;
1051 scsi_dma_unmap(sc);
1052 sc->result = DID_RESET << 16;
1053 sc->host_scribble = NULL;
1054 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
1055 "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
1056 "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
1057 scsi_done(sc);
1058 }
1059}
1060EXPORT_SYMBOL(mptscsih_flush_running_cmds);
1061
1062/*
1063 * mptscsih_search_running_cmds - Delete any commands associated
1064 * with the specified target and lun. Function called only
1065 * when a lun is disable by mid-layer.
1066 * Do NOT access the referenced scsi_cmnd structure or
1067 * members. Will cause either a paging or NULL ptr error.
1068 * (BUT, BUT, BUT, the code does reference it! - mdr)
1069 * @hd: Pointer to a SCSI HOST structure
1070 * @vdevice: per device private data
1071 *
1072 * Returns: None.
1073 *
1074 * Called from slave_destroy.
1075 */
1076static void
1077mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
1078{
1079 SCSIIORequest_t *mf = NULL;
1080 int ii;
1081 struct scsi_cmnd *sc;
1082 struct scsi_lun lun;
1083 MPT_ADAPTER *ioc = hd->ioc;
1084 unsigned long flags;
1085
1086 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1087 for (ii = 0; ii < ioc->req_depth; ii++) {
1088 if ((sc = ioc->ScsiLookup[ii]) != NULL) {
1089
1090 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1091 if (mf == NULL)
1092 continue;
1093 /* If the device is a hidden raid component, then its
1094 * expected that the mf->function will be RAID_SCSI_IO
1095 */
1096 if (vdevice->vtarget->tflags &
1097 MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function !=
1098 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
1099 continue;
1100
1101 int_to_scsilun(vdevice->lun, &lun);
1102 if ((mf->Bus != vdevice->vtarget->channel) ||
1103 (mf->TargetID != vdevice->vtarget->id) ||
1104 memcmp(lun.scsi_lun, mf->LUN, 8))
1105 continue;
1106
1107 if ((unsigned char *)mf != sc->host_scribble)
1108 continue;
1109 ioc->ScsiLookup[ii] = NULL;
1110 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1111 mptscsih_freeChainBuffers(ioc, ii);
1112 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1113 scsi_dma_unmap(sc);
1114 sc->host_scribble = NULL;
1115 sc->result = DID_NO_CONNECT << 16;
1116 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
1117 MYIOC_s_FMT "completing cmds: fw_channel %d, "
1118 "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
1119 vdevice->vtarget->channel, vdevice->vtarget->id,
1120 sc, mf, ii));
1121 scsi_done(sc);
1122 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1123 }
1124 }
1125 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1126 return;
1127}
1128
1129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1130
1131/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1132/*
1133 * mptscsih_report_queue_full - Report QUEUE_FULL status returned
1134 * from a SCSI target device.
1135 * @sc: Pointer to scsi_cmnd structure
1136 * @pScsiReply: Pointer to SCSIIOReply_t
1137 * @pScsiReq: Pointer to original SCSI request
1138 *
1139 * This routine periodically reports QUEUE_FULL status returned from a
1140 * SCSI target device. It reports this to the console via kernel
1141 * printk() API call, not more than once every 10 seconds.
1142 */
1143static void
1144mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
1145{
1146 long time = jiffies;
1147 MPT_SCSI_HOST *hd;
1148 MPT_ADAPTER *ioc;
1149
1150 if (sc->device == NULL)
1151 return;
1152 if (sc->device->host == NULL)
1153 return;
1154 if ((hd = shost_priv(sc->device->host)) == NULL)
1155 return;
1156 ioc = hd->ioc;
1157 if (time - hd->last_queue_full > 10 * HZ) {
1158 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n",
1159 ioc->name, 0, sc->device->id, sc->device->lun));
1160 hd->last_queue_full = time;
1161 }
1162}
1163
1164/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165/*
1166 * mptscsih_remove - Removed scsi devices
1167 * @pdev: Pointer to pci_dev structure
1168 *
1169 *
1170 */
1171void
1172mptscsih_remove(struct pci_dev *pdev)
1173{
1174 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1175 struct Scsi_Host *host = ioc->sh;
1176 MPT_SCSI_HOST *hd;
1177 int sz1;
1178
1179 if (host == NULL)
1180 hd = NULL;
1181 else
1182 hd = shost_priv(host);
1183
1184 mptscsih_shutdown(pdev);
1185
1186 sz1=0;
1187
1188 if (ioc->ScsiLookup != NULL) {
1189 sz1 = ioc->req_depth * sizeof(void *);
1190 kfree(ioc->ScsiLookup);
1191 ioc->ScsiLookup = NULL;
1192 }
1193
1194 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1195 "Free'd ScsiLookup (%d) memory\n",
1196 ioc->name, sz1));
1197
1198 if (hd)
1199 kfree(hd->info_kbuf);
1200
1201 /* NULL the Scsi_Host pointer
1202 */
1203 ioc->sh = NULL;
1204
1205 if (host)
1206 scsi_host_put(host);
1207 mpt_detach(pdev);
1208
1209}
1210
1211/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1212/*
1213 * mptscsih_shutdown - reboot notifier
1214 *
1215 */
1216void
1217mptscsih_shutdown(struct pci_dev *pdev)
1218{
1219}
1220
1221#ifdef CONFIG_PM
1222/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1223/*
1224 * mptscsih_suspend - Fusion MPT scsi driver suspend routine.
1225 *
1226 *
1227 */
1228int
1229mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
1230{
1231 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1232
1233 scsi_block_requests(ioc->sh);
1234 flush_scheduled_work();
1235 mptscsih_shutdown(pdev);
1236 return mpt_suspend(pdev,state);
1237}
1238
1239/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1240/*
1241 * mptscsih_resume - Fusion MPT scsi driver resume routine.
1242 *
1243 *
1244 */
1245int
1246mptscsih_resume(struct pci_dev *pdev)
1247{
1248 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1249 int rc;
1250
1251 rc = mpt_resume(pdev);
1252 scsi_unblock_requests(ioc->sh);
1253 return rc;
1254}
1255
1256#endif
1257
1258/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1259/**
1260 * mptscsih_info - Return information about MPT adapter
1261 * @SChost: Pointer to Scsi_Host structure
1262 *
1263 * (linux scsi_host_template.info routine)
1264 *
1265 * Returns pointer to buffer where information was written.
1266 */
1267const char *
1268mptscsih_info(struct Scsi_Host *SChost)
1269{
1270 MPT_SCSI_HOST *h;
1271 int size = 0;
1272
1273 h = shost_priv(SChost);
1274
1275 if (h->info_kbuf == NULL)
1276 if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
1277 return h->info_kbuf;
1278 h->info_kbuf[0] = '\0';
1279
1280 mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
1281 h->info_kbuf[size-1] = '\0';
1282
1283 return h->info_kbuf;
1284}
1285
1286int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
1287{
1288 MPT_SCSI_HOST *hd = shost_priv(host);
1289 MPT_ADAPTER *ioc = hd->ioc;
1290
1291 seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name);
1292 seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
1293 seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts);
1294 seq_printf(m, "MaxQ=%d\n", ioc->req_depth);
1295
1296 return 0;
1297}
1298
1299/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1300#define ADD_INDEX_LOG(req_ent) do { } while(0)
1301
1302/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1303/**
1304 * mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
1305 * @SCpnt: Pointer to scsi_cmnd structure
1306 *
1307 * (linux scsi_host_template.queuecommand routine)
1308 * This is the primary SCSI IO start routine. Create a MPI SCSIIORequest
1309 * from a linux scsi_cmnd request and send it to the IOC.
1310 *
1311 * Returns 0. (rtn value discarded by linux scsi mid-layer)
1312 */
1313int
1314mptscsih_qcmd(struct scsi_cmnd *SCpnt)
1315{
1316 MPT_SCSI_HOST *hd;
1317 MPT_FRAME_HDR *mf;
1318 SCSIIORequest_t *pScsiReq;
1319 VirtDevice *vdevice = SCpnt->device->hostdata;
1320 u32 datalen;
1321 u32 scsictl;
1322 u32 scsidir;
1323 u32 cmd_len;
1324 int my_idx;
1325 int ii;
1326 MPT_ADAPTER *ioc;
1327
1328 hd = shost_priv(SCpnt->device->host);
1329 ioc = hd->ioc;
1330
1331 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n",
1332 ioc->name, SCpnt));
1333
1334 if (ioc->taskmgmt_quiesce_io)
1335 return SCSI_MLQUEUE_HOST_BUSY;
1336
1337 /*
1338 * Put together a MPT SCSI request...
1339 */
1340 if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
1341 dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
1342 ioc->name));
1343 return SCSI_MLQUEUE_HOST_BUSY;
1344 }
1345
1346 pScsiReq = (SCSIIORequest_t *) mf;
1347
1348 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
1349
1350 ADD_INDEX_LOG(my_idx);
1351
1352 /* TUR's being issued with scsictl=0x02000000 (DATA_IN)!
1353 * Seems we may receive a buffer (datalen>0) even when there
1354 * will be no data transfer! GRRRRR...
1355 */
1356 if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
1357 datalen = scsi_bufflen(SCpnt);
1358 scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */
1359 } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
1360 datalen = scsi_bufflen(SCpnt);
1361 scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */
1362 } else {
1363 datalen = 0;
1364 scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
1365 }
1366
1367 /* Default to untagged. Once a target structure has been allocated,
1368 * use the Inquiry data to determine if device supports tagged.
1369 */
1370 if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) &&
1371 SCpnt->device->tagged_supported)
1372 scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
1373 else
1374 scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
1375
1376
1377 /* Use the above information to set up the message frame
1378 */
1379 pScsiReq->TargetID = (u8) vdevice->vtarget->id;
1380 pScsiReq->Bus = vdevice->vtarget->channel;
1381 pScsiReq->ChainOffset = 0;
1382 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
1383 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
1384 else
1385 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
1386 pScsiReq->CDBLength = SCpnt->cmd_len;
1387 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1388 pScsiReq->Reserved = 0;
1389 pScsiReq->MsgFlags = mpt_msg_flags(ioc);
1390 int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
1391 pScsiReq->Control = cpu_to_le32(scsictl);
1392
1393 /*
1394 * Write SCSI CDB into the message
1395 */
1396 cmd_len = SCpnt->cmd_len;
1397 for (ii=0; ii < cmd_len; ii++)
1398 pScsiReq->CDB[ii] = SCpnt->cmnd[ii];
1399
1400 for (ii=cmd_len; ii < 16; ii++)
1401 pScsiReq->CDB[ii] = 0;
1402
1403 /* DataLength */
1404 pScsiReq->DataLength = cpu_to_le32(datalen);
1405
1406 /* SenseBuffer low address */
1407 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
1408 + (my_idx * MPT_SENSE_BUFFER_ALLOC));
1409
1410 /* Now add the SG list
1411 * Always have a SGE even if null length.
1412 */
1413 if (datalen == 0) {
1414 /* Add a NULL SGE */
1415 ioc->add_sge((char *)&pScsiReq->SGL,
1416 MPT_SGE_FLAGS_SSIMPLE_READ | 0,
1417 (dma_addr_t) -1);
1418 } else {
1419 /* Add a 32 or 64 bit SGE */
1420 if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
1421 goto fail;
1422 }
1423
1424 SCpnt->host_scribble = (unsigned char *)mf;
1425 mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt);
1426
1427 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
1428 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
1429 ioc->name, SCpnt, mf, my_idx));
1430 DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf);
1431 return 0;
1432
1433 fail:
1434 mptscsih_freeChainBuffers(ioc, my_idx);
1435 mpt_free_msg_frame(ioc, mf);
1436 return SCSI_MLQUEUE_HOST_BUSY;
1437}
1438
1439/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1440/*
1441 * mptscsih_freeChainBuffers - Function to free chain buffers associated
1442 * with a SCSI IO request
1443 * @hd: Pointer to the MPT_SCSI_HOST instance
1444 * @req_idx: Index of the SCSI IO request frame.
1445 *
1446 * Called if SG chain buffer allocation fails and mptscsih callbacks.
1447 * No return.
1448 */
1449static void
1450mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
1451{
1452 MPT_FRAME_HDR *chain;
1453 unsigned long flags;
1454 int chain_idx;
1455 int next;
1456
1457 /* Get the first chain index and reset
1458 * tracker state.
1459 */
1460 chain_idx = ioc->ReqToChain[req_idx];
1461 ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;
1462
1463 while (chain_idx != MPT_HOST_NO_CHAIN) {
1464
1465 /* Save the next chain buffer index */
1466 next = ioc->ChainToChain[chain_idx];
1467
1468 /* Free this chain buffer and reset
1469 * tracker
1470 */
1471 ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;
1472
1473 chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
1474 + (chain_idx * ioc->req_sz));
1475
1476 spin_lock_irqsave(&ioc->FreeQlock, flags);
1477 list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
1478 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1479
1480 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n",
1481 ioc->name, chain_idx));
1482
1483 /* handle next */
1484 chain_idx = next;
1485 }
1486 return;
1487}
1488
1489/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1490/*
1491 * Reset Handling
1492 */
1493
1494/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1495/**
1496 * mptscsih_IssueTaskMgmt - Generic send Task Management function.
1497 * @hd: Pointer to MPT_SCSI_HOST structure
1498 * @type: Task Management type
1499 * @channel: channel number for task management
1500 * @id: Logical Target ID for reset (if appropriate)
1501 * @lun: Logical Unit for reset (if appropriate)
1502 * @ctx2abort: Context for the task to be aborted (if appropriate)
1503 * @timeout: timeout for task management control
1504 *
1505 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
1506 * or a non-interrupt thread. In the former, must not call schedule().
1507 *
1508 * Not all fields are meaningfull for all task types.
1509 *
1510 * Returns 0 for SUCCESS, or FAILED.
1511 *
1512 **/
1513int
1514mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun,
1515 int ctx2abort, ulong timeout)
1516{
1517 MPT_FRAME_HDR *mf;
1518 SCSITaskMgmt_t *pScsiTm;
1519 int ii;
1520 int retval;
1521 MPT_ADAPTER *ioc = hd->ioc;
1522 u8 issue_hard_reset;
1523 u32 ioc_raw_state;
1524 unsigned long time_count;
1525
1526 issue_hard_reset = 0;
1527 ioc_raw_state = mpt_GetIocState(ioc, 0);
1528
1529 if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
1530 printk(MYIOC_s_WARN_FMT
1531 "TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
1532 ioc->name, type, ioc_raw_state);
1533 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
1534 ioc->name, __func__);
1535 if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
1536 printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
1537 "FAILED!!\n", ioc->name);
1538 return 0;
1539 }
1540
1541 /* DOORBELL ACTIVE check is not required if
1542 * MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported.
1543 */
1544
1545 if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q)
1546 && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) &&
1547 (ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
1548 printk(MYIOC_s_WARN_FMT
1549 "TaskMgmt type=%x: ioc_state: "
1550 "DOORBELL_ACTIVE (0x%x)!\n",
1551 ioc->name, type, ioc_raw_state);
1552 return FAILED;
1553 }
1554
1555 mutex_lock(&ioc->taskmgmt_cmds.mutex);
1556 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
1557 mf = NULL;
1558 retval = FAILED;
1559 goto out;
1560 }
1561
1562 /* Return Fail to calling function if no message frames available.
1563 */
1564 if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
1565 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1566 "TaskMgmt no msg frames!!\n", ioc->name));
1567 retval = FAILED;
1568 mpt_clear_taskmgmt_in_progress_flag(ioc);
1569 goto out;
1570 }
1571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
1572 ioc->name, mf));
1573
1574 /* Format the Request
1575 */
1576 pScsiTm = (SCSITaskMgmt_t *) mf;
1577 pScsiTm->TargetID = id;
1578 pScsiTm->Bus = channel;
1579 pScsiTm->ChainOffset = 0;
1580 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
1581
1582 pScsiTm->Reserved = 0;
1583 pScsiTm->TaskType = type;
1584 pScsiTm->Reserved1 = 0;
1585 pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
1586 ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
1587
1588 int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
1589
1590 for (ii=0; ii < 7; ii++)
1591 pScsiTm->Reserved2[ii] = 0;
1592
1593 pScsiTm->TaskMsgContext = ctx2abort;
1594
1595 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
1596 "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
1597 type, timeout));
1598
1599 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
1600
1601 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1602 time_count = jiffies;
1603 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
1604 (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
1605 mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
1606 else {
1607 retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
1608 sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
1609 if (retval) {
1610 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1611 "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
1612 ioc->name, mf, retval));
1613 mpt_free_msg_frame(ioc, mf);
1614 mpt_clear_taskmgmt_in_progress_flag(ioc);
1615 goto out;
1616 }
1617 }
1618
1619 wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
1620 timeout*HZ);
1621 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
1622 retval = FAILED;
1623 dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
1624 "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
1625 mpt_clear_taskmgmt_in_progress_flag(ioc);
1626 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
1627 goto out;
1628 issue_hard_reset = 1;
1629 goto out;
1630 }
1631
1632 retval = mptscsih_taskmgmt_reply(ioc, type,
1633 (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
1634
1635 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1636 "TaskMgmt completed (%d seconds)\n",
1637 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
1638
1639 out:
1640
1641 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1642 if (issue_hard_reset) {
1643 printk(MYIOC_s_WARN_FMT
1644 "Issuing Reset from %s!! doorbell=0x%08x\n",
1645 ioc->name, __func__, mpt_GetIocState(ioc, 0));
1646 retval = (ioc->bus_type == SAS) ?
1647 mpt_HardResetHandler(ioc, CAN_SLEEP) :
1648 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1649 mpt_free_msg_frame(ioc, mf);
1650 }
1651
1652 retval = (retval == 0) ? 0 : FAILED;
1653 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
1654 return retval;
1655}
1656EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
1657
1658static int
1659mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
1660{
1661 switch (ioc->bus_type) {
1662 case FC:
1663 return 40;
1664 case SAS:
1665 return 30;
1666 case SPI:
1667 default:
1668 return 10;
1669 }
1670}
1671
1672/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1673/**
1674 * mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
1675 * @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
1676 *
1677 * (linux scsi_host_template.eh_abort_handler routine)
1678 *
1679 * Returns SUCCESS or FAILED.
1680 **/
1681int
1682mptscsih_abort(struct scsi_cmnd * SCpnt)
1683{
1684 MPT_SCSI_HOST *hd;
1685 MPT_FRAME_HDR *mf;
1686 u32 ctx2abort;
1687 int scpnt_idx;
1688 int retval;
1689 VirtDevice *vdevice;
1690 MPT_ADAPTER *ioc;
1691
1692 /* If we can't locate our host adapter structure, return FAILED status.
1693 */
1694 if ((hd = shost_priv(SCpnt->device->host)) == NULL) {
1695 SCpnt->result = DID_RESET << 16;
1696 scsi_done(SCpnt);
1697 printk(KERN_ERR MYNAM ": task abort: "
1698 "can't locate host! (sc=%p)\n", SCpnt);
1699 return FAILED;
1700 }
1701
1702 ioc = hd->ioc;
1703 printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
1704 ioc->name, SCpnt);
1705 scsi_print_command(SCpnt);
1706
1707 vdevice = SCpnt->device->hostdata;
1708 if (!vdevice || !vdevice->vtarget) {
1709 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1710 "task abort: device has been deleted (sc=%p)\n",
1711 ioc->name, SCpnt));
1712 SCpnt->result = DID_NO_CONNECT << 16;
1713 scsi_done(SCpnt);
1714 retval = SUCCESS;
1715 goto out;
1716 }
1717
1718 /* Task aborts are not supported for hidden raid components.
1719 */
1720 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1721 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1722 "task abort: hidden raid component (sc=%p)\n",
1723 ioc->name, SCpnt));
1724 SCpnt->result = DID_RESET << 16;
1725 retval = FAILED;
1726 goto out;
1727 }
1728
1729 /* Task aborts are not supported for volumes.
1730 */
1731 if (vdevice->vtarget->raidVolume) {
1732 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1733 "task abort: raid volume (sc=%p)\n",
1734 ioc->name, SCpnt));
1735 SCpnt->result = DID_RESET << 16;
1736 retval = FAILED;
1737 goto out;
1738 }
1739
1740 /* Find this command
1741 */
1742 if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) {
1743 /* Cmd not found in ScsiLookup.
1744 * Do OS callback.
1745 */
1746 SCpnt->result = DID_RESET << 16;
1747 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
1748 "Command not in the active list! (sc=%p)\n", ioc->name,
1749 SCpnt));
1750 retval = SUCCESS;
1751 goto out;
1752 }
1753
1754 if (ioc->timeouts < -1)
1755 ioc->timeouts++;
1756
1757 if (mpt_fwfault_debug)
1758 mpt_halt_firmware(ioc);
1759
1760 /* Most important! Set TaskMsgContext to SCpnt's MsgContext!
1761 * (the IO to be ABORT'd)
1762 *
1763 * NOTE: Since we do not byteswap MsgContext, we do not
1764 * swap it here either. It is an opaque cookie to
1765 * the controller, so it does not matter. -DaveM
1766 */
1767 mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx);
1768 ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
1769 retval = mptscsih_IssueTaskMgmt(hd,
1770 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
1771 vdevice->vtarget->channel,
1772 vdevice->vtarget->id, vdevice->lun,
1773 ctx2abort, mptscsih_get_tm_timeout(ioc));
1774
1775 if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
1776 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1777 "task abort: command still in active list! (sc=%p)\n",
1778 ioc->name, SCpnt));
1779 retval = FAILED;
1780 } else {
1781 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1782 "task abort: command cleared from active list! (sc=%p)\n",
1783 ioc->name, SCpnt));
1784 retval = SUCCESS;
1785 }
1786
1787 out:
1788 printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
1789 ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
1790 SCpnt);
1791
1792 return retval;
1793}
1794
1795/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1796/**
1797 * mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant
1798 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1799 *
1800 * (linux scsi_host_template.eh_dev_reset_handler routine)
1801 *
1802 * Returns SUCCESS or FAILED.
1803 **/
1804int
1805mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
1806{
1807 MPT_SCSI_HOST *hd;
1808 int retval;
1809 VirtDevice *vdevice;
1810 MPT_ADAPTER *ioc;
1811
1812 /* If we can't locate our host adapter structure, return FAILED status.
1813 */
1814 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1815 printk(KERN_ERR MYNAM ": target reset: "
1816 "Can't locate host! (sc=%p)\n", SCpnt);
1817 return FAILED;
1818 }
1819
1820 ioc = hd->ioc;
1821 printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n",
1822 ioc->name, SCpnt);
1823 scsi_print_command(SCpnt);
1824
1825 vdevice = SCpnt->device->hostdata;
1826 if (!vdevice || !vdevice->vtarget) {
1827 retval = 0;
1828 goto out;
1829 }
1830
1831 /* Target reset to hidden raid component is not supported
1832 */
1833 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1834 retval = FAILED;
1835 goto out;
1836 }
1837
1838 retval = mptscsih_IssueTaskMgmt(hd,
1839 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
1840 vdevice->vtarget->channel,
1841 vdevice->vtarget->id, 0, 0,
1842 mptscsih_get_tm_timeout(ioc));
1843
1844 out:
1845 printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
1846 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1847
1848 if (retval == 0)
1849 return SUCCESS;
1850 else
1851 return FAILED;
1852}
1853
1854
1855/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1856/**
1857 * mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant
1858 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1859 *
1860 * (linux scsi_host_template.eh_bus_reset_handler routine)
1861 *
1862 * Returns SUCCESS or FAILED.
1863 **/
1864int
1865mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
1866{
1867 MPT_SCSI_HOST *hd;
1868 int retval;
1869 VirtDevice *vdevice;
1870 MPT_ADAPTER *ioc;
1871
1872 /* If we can't locate our host adapter structure, return FAILED status.
1873 */
1874 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1875 printk(KERN_ERR MYNAM ": bus reset: "
1876 "Can't locate host! (sc=%p)\n", SCpnt);
1877 return FAILED;
1878 }
1879
1880 ioc = hd->ioc;
1881 printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
1882 ioc->name, SCpnt);
1883 scsi_print_command(SCpnt);
1884
1885 if (ioc->timeouts < -1)
1886 ioc->timeouts++;
1887
1888 vdevice = SCpnt->device->hostdata;
1889 if (!vdevice || !vdevice->vtarget)
1890 return SUCCESS;
1891 retval = mptscsih_IssueTaskMgmt(hd,
1892 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1893 vdevice->vtarget->channel, 0, 0, 0,
1894 mptscsih_get_tm_timeout(ioc));
1895
1896 printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
1897 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1898
1899 if (retval == 0)
1900 return SUCCESS;
1901 else
1902 return FAILED;
1903}
1904
1905/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1906/**
1907 * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
1908 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1909 *
1910 * (linux scsi_host_template.eh_host_reset_handler routine)
1911 *
1912 * Returns SUCCESS or FAILED.
1913 */
1914int
1915mptscsih_host_reset(struct scsi_cmnd *SCpnt)
1916{
1917 MPT_SCSI_HOST * hd;
1918 int status = SUCCESS;
1919 MPT_ADAPTER *ioc;
1920 int retval;
1921
1922 /* If we can't locate the host to reset, then we failed. */
1923 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1924 printk(KERN_ERR MYNAM ": host reset: "
1925 "Can't locate host! (sc=%p)\n", SCpnt);
1926 return FAILED;
1927 }
1928
1929 /* make sure we have no outstanding commands at this stage */
1930 mptscsih_flush_running_cmds(hd);
1931
1932 ioc = hd->ioc;
1933 printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
1934 ioc->name, SCpnt);
1935
1936 /* If our attempts to reset the host failed, then return a failed
1937 * status. The host will be taken off line by the SCSI mid-layer.
1938 */
1939 retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1940 if (retval < 0)
1941 status = FAILED;
1942 else
1943 status = SUCCESS;
1944
1945 printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
1946 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1947
1948 return status;
1949}
1950
1951static int
1952mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
1953 SCSITaskMgmtReply_t *pScsiTmReply)
1954{
1955 u16 iocstatus;
1956 u32 termination_count;
1957 int retval;
1958
1959 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
1960 retval = FAILED;
1961 goto out;
1962 }
1963
1964 DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
1965
1966 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
1967 termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
1968
1969 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1970 "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
1971 "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
1972 "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
1973 pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
1974 le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
1975 termination_count));
1976
1977 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
1978 pScsiTmReply->ResponseCode)
1979 mptscsih_taskmgmt_response_code(ioc,
1980 pScsiTmReply->ResponseCode);
1981
1982 if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
1983 retval = 0;
1984 goto out;
1985 }
1986
1987 retval = FAILED;
1988 if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
1989 if (termination_count == 1)
1990 retval = 0;
1991 goto out;
1992 }
1993
1994 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
1995 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
1996 retval = 0;
1997
1998 out:
1999 return retval;
2000}
2001
2002/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2003void
2004mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
2005{
2006 char *desc;
2007
2008 switch (response_code) {
2009 case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
2010 desc = "The task completed.";
2011 break;
2012 case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
2013 desc = "The IOC received an invalid frame status.";
2014 break;
2015 case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
2016 desc = "The task type is not supported.";
2017 break;
2018 case MPI_SCSITASKMGMT_RSP_TM_FAILED:
2019 desc = "The requested task failed.";
2020 break;
2021 case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
2022 desc = "The task completed successfully.";
2023 break;
2024 case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
2025 desc = "The LUN request is invalid.";
2026 break;
2027 case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
2028 desc = "The task is in the IOC queue and has not been sent to target.";
2029 break;
2030 default:
2031 desc = "unknown";
2032 break;
2033 }
2034 printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
2035 ioc->name, response_code, desc);
2036}
2037EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
2038
2039/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2040/**
2041 * mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
2042 * @ioc: Pointer to MPT_ADAPTER structure
2043 * @mf: Pointer to SCSI task mgmt request frame
2044 * @mr: Pointer to SCSI task mgmt reply frame
2045 *
2046 * This routine is called from mptbase.c::mpt_interrupt() at the completion
2047 * of any SCSI task management request.
2048 * This routine is registered with the MPT (base) driver at driver
2049 * load/init time via the mpt_register() API call.
2050 *
2051 * Returns 1 indicating alloc'd request frame ptr should be freed.
2052 **/
2053int
2054mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
2055 MPT_FRAME_HDR *mr)
2056{
2057 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2058 "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
2059
2060 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2061
2062 if (!mr)
2063 goto out;
2064
2065 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2066 memcpy(ioc->taskmgmt_cmds.reply, mr,
2067 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
2068 out:
2069 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
2070 mpt_clear_taskmgmt_in_progress_flag(ioc);
2071 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2072 complete(&ioc->taskmgmt_cmds.done);
2073 if (ioc->bus_type == SAS)
2074 ioc->schedule_target_reset(ioc);
2075 return 1;
2076 }
2077 return 0;
2078}
2079
2080/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2081/*
2082 * This is anyones guess quite frankly.
2083 */
2084int
2085mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
2086 sector_t capacity, int geom[])
2087{
2088 int heads;
2089 int sectors;
2090 sector_t cylinders;
2091 ulong dummy;
2092
2093 heads = 64;
2094 sectors = 32;
2095
2096 dummy = heads * sectors;
2097 cylinders = capacity;
2098 sector_div(cylinders,dummy);
2099
2100 /*
2101 * Handle extended translation size for logical drives
2102 * > 1Gb
2103 */
2104 if ((ulong)capacity >= 0x200000) {
2105 heads = 255;
2106 sectors = 63;
2107 dummy = heads * sectors;
2108 cylinders = capacity;
2109 sector_div(cylinders,dummy);
2110 }
2111
2112 /* return result */
2113 geom[0] = heads;
2114 geom[1] = sectors;
2115 geom[2] = cylinders;
2116
2117 return 0;
2118}
2119
2120/* Search IOC page 3 to determine if this is hidden physical disk
2121 *
2122 */
2123int
2124mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
2125{
2126 struct inactive_raid_component_info *component_info;
2127 int i, j;
2128 RaidPhysDiskPage1_t *phys_disk;
2129 int rc = 0;
2130 int num_paths;
2131
2132 if (!ioc->raid_data.pIocPg3)
2133 goto out;
2134 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2135 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2136 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2137 rc = 1;
2138 goto out;
2139 }
2140 }
2141
2142 if (ioc->bus_type != SAS)
2143 goto out;
2144
2145 /*
2146 * Check if dual path
2147 */
2148 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2149 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2150 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2151 if (num_paths < 2)
2152 continue;
2153 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2154 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2155 if (!phys_disk)
2156 continue;
2157 if ((mpt_raid_phys_disk_pg1(ioc,
2158 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2159 phys_disk))) {
2160 kfree(phys_disk);
2161 continue;
2162 }
2163 for (j = 0; j < num_paths; j++) {
2164 if ((phys_disk->Path[j].Flags &
2165 MPI_RAID_PHYSDISK1_FLAG_INVALID))
2166 continue;
2167 if ((phys_disk->Path[j].Flags &
2168 MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2169 continue;
2170 if ((id == phys_disk->Path[j].PhysDiskID) &&
2171 (channel == phys_disk->Path[j].PhysDiskBus)) {
2172 rc = 1;
2173 kfree(phys_disk);
2174 goto out;
2175 }
2176 }
2177 kfree(phys_disk);
2178 }
2179
2180
2181 /*
2182 * Check inactive list for matching phys disks
2183 */
2184 if (list_empty(&ioc->raid_data.inactive_list))
2185 goto out;
2186
2187 mutex_lock(&ioc->raid_data.inactive_list_mutex);
2188 list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2189 list) {
2190 if ((component_info->d.PhysDiskID == id) &&
2191 (component_info->d.PhysDiskBus == channel))
2192 rc = 1;
2193 }
2194 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2195
2196 out:
2197 return rc;
2198}
2199EXPORT_SYMBOL(mptscsih_is_phys_disk);
2200
2201u8
2202mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
2203{
2204 struct inactive_raid_component_info *component_info;
2205 int i, j;
2206 RaidPhysDiskPage1_t *phys_disk;
2207 int rc = -ENXIO;
2208 int num_paths;
2209
2210 if (!ioc->raid_data.pIocPg3)
2211 goto out;
2212 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2213 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2214 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2215 rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
2216 goto out;
2217 }
2218 }
2219
2220 if (ioc->bus_type != SAS)
2221 goto out;
2222
2223 /*
2224 * Check if dual path
2225 */
2226 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2227 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2228 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2229 if (num_paths < 2)
2230 continue;
2231 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2232 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2233 if (!phys_disk)
2234 continue;
2235 if ((mpt_raid_phys_disk_pg1(ioc,
2236 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2237 phys_disk))) {
2238 kfree(phys_disk);
2239 continue;
2240 }
2241 for (j = 0; j < num_paths; j++) {
2242 if ((phys_disk->Path[j].Flags &
2243 MPI_RAID_PHYSDISK1_FLAG_INVALID))
2244 continue;
2245 if ((phys_disk->Path[j].Flags &
2246 MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2247 continue;
2248 if ((id == phys_disk->Path[j].PhysDiskID) &&
2249 (channel == phys_disk->Path[j].PhysDiskBus)) {
2250 rc = phys_disk->PhysDiskNum;
2251 kfree(phys_disk);
2252 goto out;
2253 }
2254 }
2255 kfree(phys_disk);
2256 }
2257
2258 /*
2259 * Check inactive list for matching phys disks
2260 */
2261 if (list_empty(&ioc->raid_data.inactive_list))
2262 goto out;
2263
2264 mutex_lock(&ioc->raid_data.inactive_list_mutex);
2265 list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2266 list) {
2267 if ((component_info->d.PhysDiskID == id) &&
2268 (component_info->d.PhysDiskBus == channel))
2269 rc = component_info->d.PhysDiskNum;
2270 }
2271 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2272
2273 out:
2274 return rc;
2275}
2276EXPORT_SYMBOL(mptscsih_raid_id_to_num);
2277
2278/*
2279 * OS entry point to allow for host driver to free allocated memory
2280 * Called if no device present or device being unloaded
2281 */
2282void
2283mptscsih_slave_destroy(struct scsi_device *sdev)
2284{
2285 struct Scsi_Host *host = sdev->host;
2286 MPT_SCSI_HOST *hd = shost_priv(host);
2287 VirtTarget *vtarget;
2288 VirtDevice *vdevice;
2289 struct scsi_target *starget;
2290
2291 starget = scsi_target(sdev);
2292 vtarget = starget->hostdata;
2293 vdevice = sdev->hostdata;
2294 if (!vdevice)
2295 return;
2296
2297 mptscsih_search_running_cmds(hd, vdevice);
2298 vtarget->num_luns--;
2299 mptscsih_synchronize_cache(hd, vdevice);
2300 kfree(vdevice);
2301 sdev->hostdata = NULL;
2302}
2303
2304/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2305/*
2306 * mptscsih_change_queue_depth - This function will set a devices queue depth
2307 * @sdev: per scsi_device pointer
2308 * @qdepth: requested queue depth
2309 *
2310 * Adding support for new 'change_queue_depth' api.
2311*/
2312int
2313mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
2314{
2315 MPT_SCSI_HOST *hd = shost_priv(sdev->host);
2316 VirtTarget *vtarget;
2317 struct scsi_target *starget;
2318 int max_depth;
2319 MPT_ADAPTER *ioc = hd->ioc;
2320
2321 starget = scsi_target(sdev);
2322 vtarget = starget->hostdata;
2323
2324 if (ioc->bus_type == SPI) {
2325 if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
2326 max_depth = 1;
2327 else if (sdev->type == TYPE_DISK &&
2328 vtarget->minSyncFactor <= MPT_ULTRA160)
2329 max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
2330 else
2331 max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
2332 } else
2333 max_depth = ioc->sh->can_queue;
2334
2335 if (!sdev->tagged_supported)
2336 max_depth = 1;
2337
2338 if (qdepth > max_depth)
2339 qdepth = max_depth;
2340
2341 return scsi_change_queue_depth(sdev, qdepth);
2342}
2343
2344/*
2345 * OS entry point to adjust the queue_depths on a per-device basis.
2346 * Called once per device the bus scan. Use it to force the queue_depth
2347 * member to 1 if a device does not support Q tags.
2348 * Return non-zero if fails.
2349 */
2350int
2351mptscsih_slave_configure(struct scsi_device *sdev)
2352{
2353 struct Scsi_Host *sh = sdev->host;
2354 VirtTarget *vtarget;
2355 VirtDevice *vdevice;
2356 struct scsi_target *starget;
2357 MPT_SCSI_HOST *hd = shost_priv(sh);
2358 MPT_ADAPTER *ioc = hd->ioc;
2359
2360 starget = scsi_target(sdev);
2361 vtarget = starget->hostdata;
2362 vdevice = sdev->hostdata;
2363
2364 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2365 "device @ %p, channel=%d, id=%d, lun=%llu\n",
2366 ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
2367 if (ioc->bus_type == SPI)
2368 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2369 "sdtr %d wdtr %d ppr %d inq length=%d\n",
2370 ioc->name, sdev->sdtr, sdev->wdtr,
2371 sdev->ppr, sdev->inquiry_len));
2372
2373 vdevice->configured_lun = 1;
2374
2375 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2376 "Queue depth=%d, tflags=%x\n",
2377 ioc->name, sdev->queue_depth, vtarget->tflags));
2378
2379 if (ioc->bus_type == SPI)
2380 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2381 "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
2382 ioc->name, vtarget->negoFlags, vtarget->maxOffset,
2383 vtarget->minSyncFactor));
2384
2385 mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
2386 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2387 "tagged %d, simple %d\n",
2388 ioc->name,sdev->tagged_supported, sdev->simple_tags));
2389
2390 blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
2391
2392 return 0;
2393}
2394
2395/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2396/*
2397 * Private routines...
2398 */
2399
2400/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2401/* Utility function to copy sense data from the scsi_cmnd buffer
2402 * to the FC and SCSI target structures.
2403 *
2404 */
2405static void
2406mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
2407{
2408 VirtDevice *vdevice;
2409 SCSIIORequest_t *pReq;
2410 u32 sense_count = le32_to_cpu(pScsiReply->SenseCount);
2411 MPT_ADAPTER *ioc = hd->ioc;
2412
2413 /* Get target structure
2414 */
2415 pReq = (SCSIIORequest_t *) mf;
2416 vdevice = sc->device->hostdata;
2417
2418 if (sense_count) {
2419 u8 *sense_data;
2420 int req_index;
2421
2422 /* Copy the sense received into the scsi command block. */
2423 req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2424 sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
2425 memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC);
2426
2427 /* Log SMART data (asc = 0x5D, non-IM case only) if required.
2428 */
2429 if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
2430 if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) {
2431 int idx;
2432
2433 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
2434 ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
2435 ioc->events[idx].eventContext = ioc->eventContext;
2436
2437 ioc->events[idx].data[0] = (pReq->LUN[1] << 24) |
2438 (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) |
2439 (sc->device->channel << 8) | sc->device->id;
2440
2441 ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12];
2442
2443 ioc->eventContext++;
2444 if (ioc->pcidev->vendor ==
2445 PCI_VENDOR_ID_IBM) {
2446 mptscsih_issue_sep_command(ioc,
2447 vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
2448 vdevice->vtarget->tflags |=
2449 MPT_TARGET_FLAGS_LED_ON;
2450 }
2451 }
2452 }
2453 } else {
2454 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n",
2455 ioc->name));
2456 }
2457}
2458
2459/**
2460 * mptscsih_get_scsi_lookup - retrieves scmd entry
2461 * @ioc: Pointer to MPT_ADAPTER structure
2462 * @i: index into the array
2463 *
2464 * Returns the scsi_cmd pointer
2465 */
2466struct scsi_cmnd *
2467mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
2468{
2469 unsigned long flags;
2470 struct scsi_cmnd *scmd;
2471
2472 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2473 scmd = ioc->ScsiLookup[i];
2474 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2475
2476 return scmd;
2477}
2478EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
2479
2480/**
2481 * mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list
2482 * @ioc: Pointer to MPT_ADAPTER structure
2483 * @i: index into the array
2484 *
2485 * Returns the scsi_cmd pointer
2486 *
2487 **/
2488static struct scsi_cmnd *
2489mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
2490{
2491 unsigned long flags;
2492 struct scsi_cmnd *scmd;
2493
2494 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2495 scmd = ioc->ScsiLookup[i];
2496 ioc->ScsiLookup[i] = NULL;
2497 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2498
2499 return scmd;
2500}
2501
2502/**
2503 * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list
2504 *
2505 * @ioc: Pointer to MPT_ADAPTER structure
2506 * @i: index into the array
2507 * @scmd: scsi_cmnd pointer
2508 *
2509 **/
2510static void
2511mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd)
2512{
2513 unsigned long flags;
2514
2515 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2516 ioc->ScsiLookup[i] = scmd;
2517 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2518}
2519
2520/**
2521 * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list
2522 * @ioc: Pointer to MPT_ADAPTER structure
2523 * @sc: scsi_cmnd pointer
2524 */
2525static int
2526SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc)
2527{
2528 unsigned long flags;
2529 int i, index=-1;
2530
2531 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2532 for (i = 0; i < ioc->req_depth; i++) {
2533 if (ioc->ScsiLookup[i] == sc) {
2534 index = i;
2535 goto out;
2536 }
2537 }
2538
2539 out:
2540 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2541 return index;
2542}
2543
2544/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2545int
2546mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
2547{
2548 MPT_SCSI_HOST *hd;
2549
2550 if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
2551 return 0;
2552
2553 hd = shost_priv(ioc->sh);
2554 switch (reset_phase) {
2555 case MPT_IOC_SETUP_RESET:
2556 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2557 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
2558 break;
2559 case MPT_IOC_PRE_RESET:
2560 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2561 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
2562 mptscsih_flush_running_cmds(hd);
2563 break;
2564 case MPT_IOC_POST_RESET:
2565 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2566 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
2567 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
2568 ioc->internal_cmds.status |=
2569 MPT_MGMT_STATUS_DID_IOCRESET;
2570 complete(&ioc->internal_cmds.done);
2571 }
2572 break;
2573 default:
2574 break;
2575 }
2576 return 1; /* currently means nothing really */
2577}
2578
2579/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2580int
2581mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
2582{
2583 u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
2584
2585 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2586 "MPT event (=%02Xh) routed to SCSI host driver!\n",
2587 ioc->name, event));
2588
2589 if ((event == MPI_EVENT_IOC_BUS_RESET ||
2590 event == MPI_EVENT_EXT_BUS_RESET) &&
2591 (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
2592 ioc->soft_resets++;
2593
2594 return 1; /* currently means nothing really */
2595}
2596
2597/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2598/*
2599 * Bus Scan and Domain Validation functionality ...
2600 */
2601
2602/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2603/*
2604 * mptscsih_scandv_complete - Scan and DV callback routine registered
2605 * to Fustion MPT (base) driver.
2606 *
2607 * @ioc: Pointer to MPT_ADAPTER structure
2608 * @mf: Pointer to original MPT request frame
2609 * @mr: Pointer to MPT reply frame (NULL if TurboReply)
2610 *
2611 * This routine is called from mpt.c::mpt_interrupt() at the completion
2612 * of any SCSI IO request.
2613 * This routine is registered with the Fusion MPT (base) driver at driver
2614 * load/init time via the mpt_register() API call.
2615 *
2616 * Returns 1 indicating alloc'd request frame ptr should be freed.
2617 *
2618 * Remark: Sets a completion code and (possibly) saves sense data
2619 * in the IOC member localReply structure.
2620 * Used ONLY for DV and other internal commands.
2621 */
2622int
2623mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2624 MPT_FRAME_HDR *reply)
2625{
2626 SCSIIORequest_t *pReq;
2627 SCSIIOReply_t *pReply;
2628 u8 cmd;
2629 u16 req_idx;
2630 u8 *sense_data;
2631 int sz;
2632
2633 ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2634 ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
2635 if (!reply)
2636 goto out;
2637
2638 pReply = (SCSIIOReply_t *) reply;
2639 pReq = (SCSIIORequest_t *) req;
2640 ioc->internal_cmds.completion_code =
2641 mptscsih_get_completion_code(ioc, req, reply);
2642 ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2643 memcpy(ioc->internal_cmds.reply, reply,
2644 min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
2645 cmd = reply->u.hdr.Function;
2646 if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
2647 (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
2648 (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
2649 req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
2650 sense_data = ((u8 *)ioc->sense_buf_pool +
2651 (req_idx * MPT_SENSE_BUFFER_ALLOC));
2652 sz = min_t(int, pReq->SenseBufferLength,
2653 MPT_SENSE_BUFFER_ALLOC);
2654 memcpy(ioc->internal_cmds.sense, sense_data, sz);
2655 }
2656 out:
2657 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
2658 return 0;
2659 ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2660 complete(&ioc->internal_cmds.done);
2661 return 1;
2662}
2663
2664
2665/**
2666 * mptscsih_get_completion_code - get completion code from MPT request
2667 * @ioc: Pointer to MPT_ADAPTER structure
2668 * @req: Pointer to original MPT request frame
2669 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
2670 *
2671 **/
2672static int
2673mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2674 MPT_FRAME_HDR *reply)
2675{
2676 SCSIIOReply_t *pReply;
2677 MpiRaidActionReply_t *pr;
2678 u8 scsi_status;
2679 u16 status;
2680 int completion_code;
2681
2682 pReply = (SCSIIOReply_t *)reply;
2683 status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
2684 scsi_status = pReply->SCSIStatus;
2685
2686 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2687 "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
2688 "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
2689 scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
2690
2691 switch (status) {
2692
2693 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
2694 completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
2695 break;
2696
2697 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
2698 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
2699 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
2700 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
2701 completion_code = MPT_SCANDV_DID_RESET;
2702 break;
2703
2704 case MPI_IOCSTATUS_BUSY:
2705 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
2706 completion_code = MPT_SCANDV_BUSY;
2707 break;
2708
2709 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
2710 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
2711 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
2712 if (pReply->Function == MPI_FUNCTION_CONFIG) {
2713 completion_code = MPT_SCANDV_GOOD;
2714 } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
2715 pr = (MpiRaidActionReply_t *)reply;
2716 if (le16_to_cpu(pr->ActionStatus) ==
2717 MPI_RAID_ACTION_ASTATUS_SUCCESS)
2718 completion_code = MPT_SCANDV_GOOD;
2719 else
2720 completion_code = MPT_SCANDV_SOME_ERROR;
2721 } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
2722 completion_code = MPT_SCANDV_SENSE;
2723 else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
2724 if (req->u.scsireq.CDB[0] == INQUIRY)
2725 completion_code = MPT_SCANDV_ISSUE_SENSE;
2726 else
2727 completion_code = MPT_SCANDV_DID_RESET;
2728 } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
2729 completion_code = MPT_SCANDV_DID_RESET;
2730 else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2731 completion_code = MPT_SCANDV_DID_RESET;
2732 else if (scsi_status == MPI_SCSI_STATUS_BUSY)
2733 completion_code = MPT_SCANDV_BUSY;
2734 else
2735 completion_code = MPT_SCANDV_GOOD;
2736 break;
2737
2738 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
2739 if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2740 completion_code = MPT_SCANDV_DID_RESET;
2741 else
2742 completion_code = MPT_SCANDV_SOME_ERROR;
2743 break;
2744 default:
2745 completion_code = MPT_SCANDV_SOME_ERROR;
2746 break;
2747
2748 } /* switch(status) */
2749
2750 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2751 " completionCode set to %08xh\n", ioc->name, completion_code));
2752 return completion_code;
2753}
2754
2755/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2756/**
2757 * mptscsih_do_cmd - Do internal command.
2758 * @hd: MPT_SCSI_HOST pointer
2759 * @io: INTERNAL_CMD pointer.
2760 *
2761 * Issue the specified internally generated command and do command
2762 * specific cleanup. For bus scan / DV only.
2763 * NOTES: If command is Inquiry and status is good,
2764 * initialize a target structure, save the data
2765 *
2766 * Remark: Single threaded access only.
2767 *
2768 * Return:
2769 * < 0 if an illegal command or no resources
2770 *
2771 * 0 if good
2772 *
2773 * > 0 if command complete but some type of completion error.
2774 */
2775static int
2776mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
2777{
2778 MPT_FRAME_HDR *mf;
2779 SCSIIORequest_t *pScsiReq;
2780 int my_idx, ii, dir;
2781 int timeout;
2782 char cmdLen;
2783 char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
2784 u8 cmd = io->cmd;
2785 MPT_ADAPTER *ioc = hd->ioc;
2786 int ret = 0;
2787 unsigned long timeleft;
2788 unsigned long flags;
2789
2790 /* don't send internal command during diag reset */
2791 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2792 if (ioc->ioc_reset_in_progress) {
2793 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2794 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2795 "%s: busy with host reset\n", ioc->name, __func__));
2796 return MPT_SCANDV_BUSY;
2797 }
2798 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2799
2800 mutex_lock(&ioc->internal_cmds.mutex);
2801
2802 /* Set command specific information
2803 */
2804 switch (cmd) {
2805 case INQUIRY:
2806 cmdLen = 6;
2807 dir = MPI_SCSIIO_CONTROL_READ;
2808 CDB[0] = cmd;
2809 CDB[4] = io->size;
2810 timeout = 10;
2811 break;
2812
2813 case TEST_UNIT_READY:
2814 cmdLen = 6;
2815 dir = MPI_SCSIIO_CONTROL_READ;
2816 timeout = 10;
2817 break;
2818
2819 case START_STOP:
2820 cmdLen = 6;
2821 dir = MPI_SCSIIO_CONTROL_READ;
2822 CDB[0] = cmd;
2823 CDB[4] = 1; /*Spin up the disk */
2824 timeout = 15;
2825 break;
2826
2827 case REQUEST_SENSE:
2828 cmdLen = 6;
2829 CDB[0] = cmd;
2830 CDB[4] = io->size;
2831 dir = MPI_SCSIIO_CONTROL_READ;
2832 timeout = 10;
2833 break;
2834
2835 case READ_BUFFER:
2836 cmdLen = 10;
2837 dir = MPI_SCSIIO_CONTROL_READ;
2838 CDB[0] = cmd;
2839 if (io->flags & MPT_ICFLAG_ECHO) {
2840 CDB[1] = 0x0A;
2841 } else {
2842 CDB[1] = 0x02;
2843 }
2844
2845 if (io->flags & MPT_ICFLAG_BUF_CAP) {
2846 CDB[1] |= 0x01;
2847 }
2848 CDB[6] = (io->size >> 16) & 0xFF;
2849 CDB[7] = (io->size >> 8) & 0xFF;
2850 CDB[8] = io->size & 0xFF;
2851 timeout = 10;
2852 break;
2853
2854 case WRITE_BUFFER:
2855 cmdLen = 10;
2856 dir = MPI_SCSIIO_CONTROL_WRITE;
2857 CDB[0] = cmd;
2858 if (io->flags & MPT_ICFLAG_ECHO) {
2859 CDB[1] = 0x0A;
2860 } else {
2861 CDB[1] = 0x02;
2862 }
2863 CDB[6] = (io->size >> 16) & 0xFF;
2864 CDB[7] = (io->size >> 8) & 0xFF;
2865 CDB[8] = io->size & 0xFF;
2866 timeout = 10;
2867 break;
2868
2869 case RESERVE:
2870 cmdLen = 6;
2871 dir = MPI_SCSIIO_CONTROL_READ;
2872 CDB[0] = cmd;
2873 timeout = 10;
2874 break;
2875
2876 case RELEASE:
2877 cmdLen = 6;
2878 dir = MPI_SCSIIO_CONTROL_READ;
2879 CDB[0] = cmd;
2880 timeout = 10;
2881 break;
2882
2883 case SYNCHRONIZE_CACHE:
2884 cmdLen = 10;
2885 dir = MPI_SCSIIO_CONTROL_READ;
2886 CDB[0] = cmd;
2887// CDB[1] = 0x02; /* set immediate bit */
2888 timeout = 10;
2889 break;
2890
2891 default:
2892 /* Error Case */
2893 ret = -EFAULT;
2894 goto out;
2895 }
2896
2897 /* Get and Populate a free Frame
2898 * MsgContext set in mpt_get_msg_frame call
2899 */
2900 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
2901 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
2902 ioc->name, __func__));
2903 ret = MPT_SCANDV_BUSY;
2904 goto out;
2905 }
2906
2907 pScsiReq = (SCSIIORequest_t *) mf;
2908
2909 /* Get the request index */
2910 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2911 ADD_INDEX_LOG(my_idx); /* for debug */
2912
2913 if (io->flags & MPT_ICFLAG_PHYS_DISK) {
2914 pScsiReq->TargetID = io->physDiskNum;
2915 pScsiReq->Bus = 0;
2916 pScsiReq->ChainOffset = 0;
2917 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
2918 } else {
2919 pScsiReq->TargetID = io->id;
2920 pScsiReq->Bus = io->channel;
2921 pScsiReq->ChainOffset = 0;
2922 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
2923 }
2924
2925 pScsiReq->CDBLength = cmdLen;
2926 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
2927
2928 pScsiReq->Reserved = 0;
2929
2930 pScsiReq->MsgFlags = mpt_msg_flags(ioc);
2931 /* MsgContext set in mpt_get_msg_fram call */
2932
2933 int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
2934
2935 if (io->flags & MPT_ICFLAG_TAGGED_CMD)
2936 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
2937 else
2938 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2939
2940 if (cmd == REQUEST_SENSE) {
2941 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2942 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2943 "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
2944 }
2945
2946 for (ii = 0; ii < 16; ii++)
2947 pScsiReq->CDB[ii] = CDB[ii];
2948
2949 pScsiReq->DataLength = cpu_to_le32(io->size);
2950 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
2951 + (my_idx * MPT_SENSE_BUFFER_ALLOC));
2952
2953 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2954 "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n",
2955 ioc->name, __func__, cmd, io->channel, io->id, io->lun));
2956
2957 if (dir == MPI_SCSIIO_CONTROL_READ)
2958 ioc->add_sge((char *) &pScsiReq->SGL,
2959 MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
2960 else
2961 ioc->add_sge((char *) &pScsiReq->SGL,
2962 MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
2963
2964 INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
2965 mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
2966 timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
2967 timeout*HZ);
2968 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2969 ret = MPT_SCANDV_DID_RESET;
2970 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2971 "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
2972 cmd));
2973 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2974 mpt_free_msg_frame(ioc, mf);
2975 goto out;
2976 }
2977 if (!timeleft) {
2978 printk(MYIOC_s_WARN_FMT
2979 "Issuing Reset from %s!! doorbell=0x%08xh"
2980 " cmd=0x%02x\n",
2981 ioc->name, __func__, mpt_GetIocState(ioc, 0),
2982 cmd);
2983 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
2984 mpt_free_msg_frame(ioc, mf);
2985 }
2986 goto out;
2987 }
2988
2989 ret = ioc->internal_cmds.completion_code;
2990 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
2991 ioc->name, __func__, ret));
2992
2993 out:
2994 CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
2995 mutex_unlock(&ioc->internal_cmds.mutex);
2996 return ret;
2997}
2998
2999/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3000/**
3001 * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
3002 * @hd: Pointer to a SCSI HOST structure
3003 * @vdevice: virtual target device
3004 *
3005 * Uses the ISR, but with special processing.
3006 * MUST be single-threaded.
3007 *
3008 */
3009static void
3010mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
3011{
3012 INTERNAL_CMD iocmd;
3013
3014 /* Ignore hidden raid components, this is handled when the command
3015 * is sent to the volume
3016 */
3017 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
3018 return;
3019
3020 if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted ||
3021 !vdevice->configured_lun)
3022 return;
3023
3024 /* Following parameters will not change
3025 * in this routine.
3026 */
3027 iocmd.cmd = SYNCHRONIZE_CACHE;
3028 iocmd.flags = 0;
3029 iocmd.physDiskNum = -1;
3030 iocmd.data = NULL;
3031 iocmd.data_dma = -1;
3032 iocmd.size = 0;
3033 iocmd.rsvd = iocmd.rsvd2 = 0;
3034 iocmd.channel = vdevice->vtarget->channel;
3035 iocmd.id = vdevice->vtarget->id;
3036 iocmd.lun = vdevice->lun;
3037
3038 mptscsih_do_cmd(hd, &iocmd);
3039}
3040
3041static ssize_t
3042mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr,
3043 char *buf)
3044{
3045 struct Scsi_Host *host = class_to_shost(dev);
3046 MPT_SCSI_HOST *hd = shost_priv(host);
3047 MPT_ADAPTER *ioc = hd->ioc;
3048
3049 return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
3050 (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
3051 (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
3052 (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
3053 ioc->facts.FWVersion.Word & 0x000000FF);
3054}
3055static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL);
3056
3057static ssize_t
3058mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr,
3059 char *buf)
3060{
3061 struct Scsi_Host *host = class_to_shost(dev);
3062 MPT_SCSI_HOST *hd = shost_priv(host);
3063 MPT_ADAPTER *ioc = hd->ioc;
3064
3065 return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
3066 (ioc->biosVersion & 0xFF000000) >> 24,
3067 (ioc->biosVersion & 0x00FF0000) >> 16,
3068 (ioc->biosVersion & 0x0000FF00) >> 8,
3069 ioc->biosVersion & 0x000000FF);
3070}
3071static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL);
3072
3073static ssize_t
3074mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr,
3075 char *buf)
3076{
3077 struct Scsi_Host *host = class_to_shost(dev);
3078 MPT_SCSI_HOST *hd = shost_priv(host);
3079 MPT_ADAPTER *ioc = hd->ioc;
3080
3081 return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion);
3082}
3083static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL);
3084
3085static ssize_t
3086mptscsih_version_product_show(struct device *dev,
3087 struct device_attribute *attr,
3088char *buf)
3089{
3090 struct Scsi_Host *host = class_to_shost(dev);
3091 MPT_SCSI_HOST *hd = shost_priv(host);
3092 MPT_ADAPTER *ioc = hd->ioc;
3093
3094 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name);
3095}
3096static DEVICE_ATTR(version_product, S_IRUGO,
3097 mptscsih_version_product_show, NULL);
3098
3099static ssize_t
3100mptscsih_version_nvdata_persistent_show(struct device *dev,
3101 struct device_attribute *attr,
3102 char *buf)
3103{
3104 struct Scsi_Host *host = class_to_shost(dev);
3105 MPT_SCSI_HOST *hd = shost_priv(host);
3106 MPT_ADAPTER *ioc = hd->ioc;
3107
3108 return snprintf(buf, PAGE_SIZE, "%02xh\n",
3109 ioc->nvdata_version_persistent);
3110}
3111static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
3112 mptscsih_version_nvdata_persistent_show, NULL);
3113
3114static ssize_t
3115mptscsih_version_nvdata_default_show(struct device *dev,
3116 struct device_attribute *attr, char *buf)
3117{
3118 struct Scsi_Host *host = class_to_shost(dev);
3119 MPT_SCSI_HOST *hd = shost_priv(host);
3120 MPT_ADAPTER *ioc = hd->ioc;
3121
3122 return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default);
3123}
3124static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
3125 mptscsih_version_nvdata_default_show, NULL);
3126
3127static ssize_t
3128mptscsih_board_name_show(struct device *dev, struct device_attribute *attr,
3129 char *buf)
3130{
3131 struct Scsi_Host *host = class_to_shost(dev);
3132 MPT_SCSI_HOST *hd = shost_priv(host);
3133 MPT_ADAPTER *ioc = hd->ioc;
3134
3135 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name);
3136}
3137static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL);
3138
3139static ssize_t
3140mptscsih_board_assembly_show(struct device *dev,
3141 struct device_attribute *attr, char *buf)
3142{
3143 struct Scsi_Host *host = class_to_shost(dev);
3144 MPT_SCSI_HOST *hd = shost_priv(host);
3145 MPT_ADAPTER *ioc = hd->ioc;
3146
3147 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly);
3148}
3149static DEVICE_ATTR(board_assembly, S_IRUGO,
3150 mptscsih_board_assembly_show, NULL);
3151
3152static ssize_t
3153mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr,
3154 char *buf)
3155{
3156 struct Scsi_Host *host = class_to_shost(dev);
3157 MPT_SCSI_HOST *hd = shost_priv(host);
3158 MPT_ADAPTER *ioc = hd->ioc;
3159
3160 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer);
3161}
3162static DEVICE_ATTR(board_tracer, S_IRUGO,
3163 mptscsih_board_tracer_show, NULL);
3164
3165static ssize_t
3166mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr,
3167 char *buf)
3168{
3169 struct Scsi_Host *host = class_to_shost(dev);
3170 MPT_SCSI_HOST *hd = shost_priv(host);
3171 MPT_ADAPTER *ioc = hd->ioc;
3172
3173 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
3174}
3175static DEVICE_ATTR(io_delay, S_IRUGO,
3176 mptscsih_io_delay_show, NULL);
3177
3178static ssize_t
3179mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr,
3180 char *buf)
3181{
3182 struct Scsi_Host *host = class_to_shost(dev);
3183 MPT_SCSI_HOST *hd = shost_priv(host);
3184 MPT_ADAPTER *ioc = hd->ioc;
3185
3186 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
3187}
3188static DEVICE_ATTR(device_delay, S_IRUGO,
3189 mptscsih_device_delay_show, NULL);
3190
3191static ssize_t
3192mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr,
3193 char *buf)
3194{
3195 struct Scsi_Host *host = class_to_shost(dev);
3196 MPT_SCSI_HOST *hd = shost_priv(host);
3197 MPT_ADAPTER *ioc = hd->ioc;
3198
3199 return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level);
3200}
3201static ssize_t
3202mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr,
3203 const char *buf, size_t count)
3204{
3205 struct Scsi_Host *host = class_to_shost(dev);
3206 MPT_SCSI_HOST *hd = shost_priv(host);
3207 MPT_ADAPTER *ioc = hd->ioc;
3208 int val = 0;
3209
3210 if (sscanf(buf, "%x", &val) != 1)
3211 return -EINVAL;
3212
3213 ioc->debug_level = val;
3214 printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",
3215 ioc->name, ioc->debug_level);
3216 return strlen(buf);
3217}
3218static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR,
3219 mptscsih_debug_level_show, mptscsih_debug_level_store);
3220
3221static struct attribute *mptscsih_host_attrs[] = {
3222 &dev_attr_version_fw.attr,
3223 &dev_attr_version_bios.attr,
3224 &dev_attr_version_mpi.attr,
3225 &dev_attr_version_product.attr,
3226 &dev_attr_version_nvdata_persistent.attr,
3227 &dev_attr_version_nvdata_default.attr,
3228 &dev_attr_board_name.attr,
3229 &dev_attr_board_assembly.attr,
3230 &dev_attr_board_tracer.attr,
3231 &dev_attr_io_delay.attr,
3232 &dev_attr_device_delay.attr,
3233 &dev_attr_debug_level.attr,
3234 NULL,
3235};
3236
3237static const struct attribute_group mptscsih_host_attr_group = {
3238 .attrs = mptscsih_host_attrs
3239};
3240
3241const struct attribute_group *mptscsih_host_attr_groups[] = {
3242 &mptscsih_host_attr_group,
3243 NULL
3244};
3245EXPORT_SYMBOL(mptscsih_host_attr_groups);
3246
3247EXPORT_SYMBOL(mptscsih_remove);
3248EXPORT_SYMBOL(mptscsih_shutdown);
3249#ifdef CONFIG_PM
3250EXPORT_SYMBOL(mptscsih_suspend);
3251EXPORT_SYMBOL(mptscsih_resume);
3252#endif
3253EXPORT_SYMBOL(mptscsih_show_info);
3254EXPORT_SYMBOL(mptscsih_info);
3255EXPORT_SYMBOL(mptscsih_qcmd);
3256EXPORT_SYMBOL(mptscsih_slave_destroy);
3257EXPORT_SYMBOL(mptscsih_slave_configure);
3258EXPORT_SYMBOL(mptscsih_abort);
3259EXPORT_SYMBOL(mptscsih_dev_reset);
3260EXPORT_SYMBOL(mptscsih_bus_reset);
3261EXPORT_SYMBOL(mptscsih_host_reset);
3262EXPORT_SYMBOL(mptscsih_bios_param);
3263EXPORT_SYMBOL(mptscsih_io_done);
3264EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
3265EXPORT_SYMBOL(mptscsih_scandv_complete);
3266EXPORT_SYMBOL(mptscsih_event_process);
3267EXPORT_SYMBOL(mptscsih_ioc_reset);
3268EXPORT_SYMBOL(mptscsih_change_queue_depth);
3269
3270/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1/*
2 * linux/drivers/message/fusion/mptscsih.c
3 * For use with LSI PCI chip/adapter(s)
4 * running LSI Fusion MPT (Message Passing Technology) firmware.
5 *
6 * Copyright (c) 1999-2008 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
8 *
9 */
10/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11/*
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; version 2 of the License.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 NO WARRANTY
22 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26 solely responsible for determining the appropriateness of using and
27 distributing the Program and assumes all risks associated with its
28 exercise of rights under this Agreement, including but not limited to
29 the risks and costs of program errors, damage to or loss of data,
30 programs or equipment, and unavailability or interruption of operations.
31
32 DISCLAIMER OF LIABILITY
33 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40
41 You should have received a copy of the GNU General Public License
42 along with this program; if not, write to the Free Software
43 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
44*/
45/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46
47#include <linux/module.h>
48#include <linux/kernel.h>
49#include <linux/slab.h>
50#include <linux/init.h>
51#include <linux/errno.h>
52#include <linux/kdev_t.h>
53#include <linux/blkdev.h>
54#include <linux/delay.h> /* for mdelay */
55#include <linux/interrupt.h> /* needed for in_interrupt() proto */
56#include <linux/reboot.h> /* notifier code */
57#include <linux/workqueue.h>
58
59#include <scsi/scsi.h>
60#include <scsi/scsi_cmnd.h>
61#include <scsi/scsi_device.h>
62#include <scsi/scsi_host.h>
63#include <scsi/scsi_tcq.h>
64#include <scsi/scsi_dbg.h>
65
66#include "mptbase.h"
67#include "mptscsih.h"
68#include "lsi/mpi_log_sas.h"
69
70/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
71#define my_NAME "Fusion MPT SCSI Host driver"
72#define my_VERSION MPT_LINUX_VERSION_COMMON
73#define MYNAM "mptscsih"
74
75MODULE_AUTHOR(MODULEAUTHOR);
76MODULE_DESCRIPTION(my_NAME);
77MODULE_LICENSE("GPL");
78MODULE_VERSION(my_VERSION);
79
80/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
81/*
82 * Other private/forward protos...
83 */
84struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
85static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
86static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
87static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
88int mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
89static void mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq);
90int mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
91
92static int mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
93 SCSIIORequest_t *pReq, int req_idx);
94static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
95static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
96
97int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
98 u64 lun, int ctx2abort, ulong timeout);
99
100int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
101int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
102
103void
104mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
105static int mptscsih_get_completion_code(MPT_ADAPTER *ioc,
106 MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
107int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
108static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
109static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
110
111static int
112mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
113 SCSITaskMgmtReply_t *pScsiTmReply);
114void mptscsih_remove(struct pci_dev *);
115void mptscsih_shutdown(struct pci_dev *);
116#ifdef CONFIG_PM
117int mptscsih_suspend(struct pci_dev *pdev, pm_message_t state);
118int mptscsih_resume(struct pci_dev *pdev);
119#endif
120
121
122/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
123/*
124 * mptscsih_getFreeChainBuffer - Function to get a free chain
125 * from the MPT_SCSI_HOST FreeChainQ.
126 * @ioc: Pointer to MPT_ADAPTER structure
127 * @req_idx: Index of the SCSI IO request frame. (output)
128 *
129 * return SUCCESS or FAILED
130 */
131static inline int
132mptscsih_getFreeChainBuffer(MPT_ADAPTER *ioc, int *retIndex)
133{
134 MPT_FRAME_HDR *chainBuf;
135 unsigned long flags;
136 int rc;
137 int chain_idx;
138
139 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
140 ioc->name));
141 spin_lock_irqsave(&ioc->FreeQlock, flags);
142 if (!list_empty(&ioc->FreeChainQ)) {
143 int offset;
144
145 chainBuf = list_entry(ioc->FreeChainQ.next, MPT_FRAME_HDR,
146 u.frame.linkage.list);
147 list_del(&chainBuf->u.frame.linkage.list);
148 offset = (u8 *)chainBuf - (u8 *)ioc->ChainBuffer;
149 chain_idx = offset / ioc->req_sz;
150 rc = SUCCESS;
151 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
152 "getFreeChainBuffer chainBuf=%p ChainBuffer=%p offset=%d chain_idx=%d\n",
153 ioc->name, chainBuf, ioc->ChainBuffer, offset, chain_idx));
154 } else {
155 rc = FAILED;
156 chain_idx = MPT_HOST_NO_CHAIN;
157 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
158 ioc->name));
159 }
160 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
161
162 *retIndex = chain_idx;
163 return rc;
164} /* mptscsih_getFreeChainBuffer() */
165
166/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
167/*
168 * mptscsih_AddSGE - Add a SGE (plus chain buffers) to the
169 * SCSIIORequest_t Message Frame.
170 * @ioc: Pointer to MPT_ADAPTER structure
171 * @SCpnt: Pointer to scsi_cmnd structure
172 * @pReq: Pointer to SCSIIORequest_t structure
173 *
174 * Returns ...
175 */
176static int
177mptscsih_AddSGE(MPT_ADAPTER *ioc, struct scsi_cmnd *SCpnt,
178 SCSIIORequest_t *pReq, int req_idx)
179{
180 char *psge;
181 char *chainSge;
182 struct scatterlist *sg;
183 int frm_sz;
184 int sges_left, sg_done;
185 int chain_idx = MPT_HOST_NO_CHAIN;
186 int sgeOffset;
187 int numSgeSlots, numSgeThisFrame;
188 u32 sgflags, sgdir, thisxfer = 0;
189 int chain_dma_off = 0;
190 int newIndex;
191 int ii;
192 dma_addr_t v2;
193 u32 RequestNB;
194
195 sgdir = le32_to_cpu(pReq->Control) & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK;
196 if (sgdir == MPI_SCSIIO_CONTROL_WRITE) {
197 sgdir = MPT_TRANSFER_HOST_TO_IOC;
198 } else {
199 sgdir = MPT_TRANSFER_IOC_TO_HOST;
200 }
201
202 psge = (char *) &pReq->SGL;
203 frm_sz = ioc->req_sz;
204
205 /* Map the data portion, if any.
206 * sges_left = 0 if no data transfer.
207 */
208 sges_left = scsi_dma_map(SCpnt);
209 if (sges_left < 0)
210 return FAILED;
211
212 /* Handle the SG case.
213 */
214 sg = scsi_sglist(SCpnt);
215 sg_done = 0;
216 sgeOffset = sizeof(SCSIIORequest_t) - sizeof(SGE_IO_UNION);
217 chainSge = NULL;
218
219 /* Prior to entering this loop - the following must be set
220 * current MF: sgeOffset (bytes)
221 * chainSge (Null if original MF is not a chain buffer)
222 * sg_done (num SGE done for this MF)
223 */
224
225nextSGEset:
226 numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
227 numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
228
229 sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
230
231 /* Get first (num - 1) SG elements
232 * Skip any SG entries with a length of 0
233 * NOTE: at finish, sg and psge pointed to NEXT data/location positions
234 */
235 for (ii=0; ii < (numSgeThisFrame-1); ii++) {
236 thisxfer = sg_dma_len(sg);
237 if (thisxfer == 0) {
238 /* Get next SG element from the OS */
239 sg = sg_next(sg);
240 sg_done++;
241 continue;
242 }
243
244 v2 = sg_dma_address(sg);
245 ioc->add_sge(psge, sgflags | thisxfer, v2);
246
247 /* Get next SG element from the OS */
248 sg = sg_next(sg);
249 psge += ioc->SGE_size;
250 sgeOffset += ioc->SGE_size;
251 sg_done++;
252 }
253
254 if (numSgeThisFrame == sges_left) {
255 /* Add last element, end of buffer and end of list flags.
256 */
257 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT |
258 MPT_SGE_FLAGS_END_OF_BUFFER |
259 MPT_SGE_FLAGS_END_OF_LIST;
260
261 /* Add last SGE and set termination flags.
262 * Note: Last SGE may have a length of 0 - which should be ok.
263 */
264 thisxfer = sg_dma_len(sg);
265
266 v2 = sg_dma_address(sg);
267 ioc->add_sge(psge, sgflags | thisxfer, v2);
268 sgeOffset += ioc->SGE_size;
269 sg_done++;
270
271 if (chainSge) {
272 /* The current buffer is a chain buffer,
273 * but there is not another one.
274 * Update the chain element
275 * Offset and Length fields.
276 */
277 ioc->add_chain((char *)chainSge, 0, sgeOffset,
278 ioc->ChainBufferDMA + chain_dma_off);
279 } else {
280 /* The current buffer is the original MF
281 * and there is no Chain buffer.
282 */
283 pReq->ChainOffset = 0;
284 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
285 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
286 "Single Buffer RequestNB=%x, sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
287 ioc->RequestNB[req_idx] = RequestNB;
288 }
289 } else {
290 /* At least one chain buffer is needed.
291 * Complete the first MF
292 * - last SGE element, set the LastElement bit
293 * - set ChainOffset (words) for orig MF
294 * (OR finish previous MF chain buffer)
295 * - update MFStructPtr ChainIndex
296 * - Populate chain element
297 * Also
298 * Loop until done.
299 */
300
301 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n",
302 ioc->name, sg_done));
303
304 /* Set LAST_ELEMENT flag for last non-chain element
305 * in the buffer. Since psge points at the NEXT
306 * SGE element, go back one SGE element, update the flags
307 * and reset the pointer. (Note: sgflags & thisxfer are already
308 * set properly).
309 */
310 if (sg_done) {
311 u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
312 sgflags = le32_to_cpu(*ptmp);
313 sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
314 *ptmp = cpu_to_le32(sgflags);
315 }
316
317 if (chainSge) {
318 /* The current buffer is a chain buffer.
319 * chainSge points to the previous Chain Element.
320 * Update its chain element Offset and Length (must
321 * include chain element size) fields.
322 * Old chain element is now complete.
323 */
324 u8 nextChain = (u8) (sgeOffset >> 2);
325 sgeOffset += ioc->SGE_size;
326 ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
327 ioc->ChainBufferDMA + chain_dma_off);
328 } else {
329 /* The original MF buffer requires a chain buffer -
330 * set the offset.
331 * Last element in this MF is a chain element.
332 */
333 pReq->ChainOffset = (u8) (sgeOffset >> 2);
334 RequestNB = (((sgeOffset - 1) >> ioc->NBShiftFactor) + 1) & 0x03;
335 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
336 ioc->RequestNB[req_idx] = RequestNB;
337 }
338
339 sges_left -= sg_done;
340
341
342 /* NOTE: psge points to the beginning of the chain element
343 * in current buffer. Get a chain buffer.
344 */
345 if ((mptscsih_getFreeChainBuffer(ioc, &newIndex)) == FAILED) {
346 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
347 "getFreeChainBuffer FAILED SCSI cmd=%02x (%p)\n",
348 ioc->name, pReq->CDB[0], SCpnt));
349 return FAILED;
350 }
351
352 /* Update the tracking arrays.
353 * If chainSge == NULL, update ReqToChain, else ChainToChain
354 */
355 if (chainSge) {
356 ioc->ChainToChain[chain_idx] = newIndex;
357 } else {
358 ioc->ReqToChain[req_idx] = newIndex;
359 }
360 chain_idx = newIndex;
361 chain_dma_off = ioc->req_sz * chain_idx;
362
363 /* Populate the chainSGE for the current buffer.
364 * - Set chain buffer pointer to psge and fill
365 * out the Address and Flags fields.
366 */
367 chainSge = (char *) psge;
368 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)",
369 ioc->name, psge, req_idx));
370
371 /* Start the SGE for the next buffer
372 */
373 psge = (char *) (ioc->ChainBuffer + chain_dma_off);
374 sgeOffset = 0;
375 sg_done = 0;
376
377 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n",
378 ioc->name, psge, chain_idx));
379
380 /* Start the SGE for the next buffer
381 */
382
383 goto nextSGEset;
384 }
385
386 return SUCCESS;
387} /* mptscsih_AddSGE() */
388
389static void
390mptscsih_issue_sep_command(MPT_ADAPTER *ioc, VirtTarget *vtarget,
391 U32 SlotStatus)
392{
393 MPT_FRAME_HDR *mf;
394 SEPRequest_t *SEPMsg;
395
396 if (ioc->bus_type != SAS)
397 return;
398
399 /* Not supported for hidden raid components
400 */
401 if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
402 return;
403
404 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
405 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
406 ioc->name,__func__));
407 return;
408 }
409
410 SEPMsg = (SEPRequest_t *)mf;
411 SEPMsg->Function = MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
412 SEPMsg->Bus = vtarget->channel;
413 SEPMsg->TargetID = vtarget->id;
414 SEPMsg->Action = MPI_SEP_REQ_ACTION_WRITE_STATUS;
415 SEPMsg->SlotStatus = SlotStatus;
416 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
417 "Sending SEP cmd=%x channel=%d id=%d\n",
418 ioc->name, SlotStatus, SEPMsg->Bus, SEPMsg->TargetID));
419 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
420}
421
422#ifdef CONFIG_FUSION_LOGGING
423/**
424 * mptscsih_info_scsiio - debug print info on reply frame
425 * @ioc: Pointer to MPT_ADAPTER structure
426 * @sc: original scsi cmnd pointer
427 * @pScsiReply: Pointer to MPT reply frame
428 *
429 * MPT_DEBUG_REPLY needs to be enabled to obtain this info
430 *
431 * Refer to lsi/mpi.h.
432 **/
433static void
434mptscsih_info_scsiio(MPT_ADAPTER *ioc, struct scsi_cmnd *sc, SCSIIOReply_t * pScsiReply)
435{
436 char *desc = NULL;
437 char *desc1 = NULL;
438 u16 ioc_status;
439 u8 skey, asc, ascq;
440
441 ioc_status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
442
443 switch (ioc_status) {
444
445 case MPI_IOCSTATUS_SUCCESS:
446 desc = "success";
447 break;
448 case MPI_IOCSTATUS_SCSI_INVALID_BUS:
449 desc = "invalid bus";
450 break;
451 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
452 desc = "invalid target_id";
453 break;
454 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
455 desc = "device not there";
456 break;
457 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
458 desc = "data overrun";
459 break;
460 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
461 desc = "data underrun";
462 break;
463 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR:
464 desc = "I/O data error";
465 break;
466 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR:
467 desc = "protocol error";
468 break;
469 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
470 desc = "task terminated";
471 break;
472 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
473 desc = "residual mismatch";
474 break;
475 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
476 desc = "task management failed";
477 break;
478 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
479 desc = "IOC terminated";
480 break;
481 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
482 desc = "ext terminated";
483 break;
484 default:
485 desc = "";
486 break;
487 }
488
489 switch (pScsiReply->SCSIStatus)
490 {
491
492 case MPI_SCSI_STATUS_SUCCESS:
493 desc1 = "success";
494 break;
495 case MPI_SCSI_STATUS_CHECK_CONDITION:
496 desc1 = "check condition";
497 break;
498 case MPI_SCSI_STATUS_CONDITION_MET:
499 desc1 = "condition met";
500 break;
501 case MPI_SCSI_STATUS_BUSY:
502 desc1 = "busy";
503 break;
504 case MPI_SCSI_STATUS_INTERMEDIATE:
505 desc1 = "intermediate";
506 break;
507 case MPI_SCSI_STATUS_INTERMEDIATE_CONDMET:
508 desc1 = "intermediate condmet";
509 break;
510 case MPI_SCSI_STATUS_RESERVATION_CONFLICT:
511 desc1 = "reservation conflict";
512 break;
513 case MPI_SCSI_STATUS_COMMAND_TERMINATED:
514 desc1 = "command terminated";
515 break;
516 case MPI_SCSI_STATUS_TASK_SET_FULL:
517 desc1 = "task set full";
518 break;
519 case MPI_SCSI_STATUS_ACA_ACTIVE:
520 desc1 = "aca active";
521 break;
522 case MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT:
523 desc1 = "fcpext device logged out";
524 break;
525 case MPI_SCSI_STATUS_FCPEXT_NO_LINK:
526 desc1 = "fcpext no link";
527 break;
528 case MPI_SCSI_STATUS_FCPEXT_UNASSIGNED:
529 desc1 = "fcpext unassigned";
530 break;
531 default:
532 desc1 = "";
533 break;
534 }
535
536 scsi_print_command(sc);
537 printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n",
538 ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
539 printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
540 "resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
541 scsi_get_resid(sc));
542 printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
543 "sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
544 le32_to_cpu(pScsiReply->TransferCount), sc->result);
545
546 printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
547 "scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
548 ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
549 pScsiReply->SCSIState);
550
551 if (pScsiReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
552 skey = sc->sense_buffer[2] & 0x0F;
553 asc = sc->sense_buffer[12];
554 ascq = sc->sense_buffer[13];
555
556 printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
557 "[0x%02x,0x%02x,0x%02x]\n", ioc->name, skey, asc, ascq);
558 }
559
560 /*
561 * Look for + dump FCP ResponseInfo[]!
562 */
563 if (pScsiReply->SCSIState & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
564 pScsiReply->ResponseInfo)
565 printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
566 ioc->name, le32_to_cpu(pScsiReply->ResponseInfo));
567}
568#endif
569
570/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
571/*
572 * mptscsih_io_done - Main SCSI IO callback routine registered to
573 * Fusion MPT (base) driver
574 * @ioc: Pointer to MPT_ADAPTER structure
575 * @mf: Pointer to original MPT request frame
576 * @r: Pointer to MPT reply frame (NULL if TurboReply)
577 *
578 * This routine is called from mpt.c::mpt_interrupt() at the completion
579 * of any SCSI IO request.
580 * This routine is registered with the Fusion MPT (base) driver at driver
581 * load/init time via the mpt_register() API call.
582 *
583 * Returns 1 indicating alloc'd request frame ptr should be freed.
584 */
585int
586mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
587{
588 struct scsi_cmnd *sc;
589 MPT_SCSI_HOST *hd;
590 SCSIIORequest_t *pScsiReq;
591 SCSIIOReply_t *pScsiReply;
592 u16 req_idx, req_idx_MR;
593 VirtDevice *vdevice;
594 VirtTarget *vtarget;
595
596 hd = shost_priv(ioc->sh);
597 req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
598 req_idx_MR = (mr != NULL) ?
599 le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
600
601 /* Special case, where already freed message frame is received from
602 * Firmware. It happens with Resetting IOC.
603 * Return immediately. Do not care
604 */
605 if ((req_idx != req_idx_MR) ||
606 (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
607 return 0;
608
609 sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
610 if (sc == NULL) {
611 MPIHeader_t *hdr = (MPIHeader_t *)mf;
612
613 /* Remark: writeSDP1 will use the ScsiDoneCtx
614 * If a SCSI I/O cmd, device disabled by OS and
615 * completion done. Cannot touch sc struct. Just free mem.
616 */
617 if (hdr->Function == MPI_FUNCTION_SCSI_IO_REQUEST)
618 printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
619 ioc->name);
620
621 mptscsih_freeChainBuffers(ioc, req_idx);
622 return 1;
623 }
624
625 if ((unsigned char *)mf != sc->host_scribble) {
626 mptscsih_freeChainBuffers(ioc, req_idx);
627 return 1;
628 }
629
630 if (ioc->bus_type == SAS) {
631 VirtDevice *vdevice = sc->device->hostdata;
632
633 if (!vdevice || !vdevice->vtarget ||
634 vdevice->vtarget->deleted) {
635 sc->result = DID_NO_CONNECT << 16;
636 goto out;
637 }
638 }
639
640 sc->host_scribble = NULL;
641 sc->result = DID_OK << 16; /* Set default reply as OK */
642 pScsiReq = (SCSIIORequest_t *) mf;
643 pScsiReply = (SCSIIOReply_t *) mr;
644
645 if((ioc->facts.MsgVersion >= MPI_VERSION_01_05) && pScsiReply){
646 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
647 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d,task-tag=%d)\n",
648 ioc->name, mf, mr, sc, req_idx, pScsiReply->TaskTag));
649 }else{
650 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
651 "ScsiDone (mf=%p,mr=%p,sc=%p,idx=%d)\n",
652 ioc->name, mf, mr, sc, req_idx));
653 }
654
655 if (pScsiReply == NULL) {
656 /* special context reply handling */
657 ;
658 } else {
659 u32 xfer_cnt;
660 u16 status;
661 u8 scsi_state, scsi_status;
662 u32 log_info;
663
664 status = le16_to_cpu(pScsiReply->IOCStatus) & MPI_IOCSTATUS_MASK;
665
666 scsi_state = pScsiReply->SCSIState;
667 scsi_status = pScsiReply->SCSIStatus;
668 xfer_cnt = le32_to_cpu(pScsiReply->TransferCount);
669 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
670 log_info = le32_to_cpu(pScsiReply->IOCLogInfo);
671
672 /*
673 * if we get a data underrun indication, yet no data was
674 * transferred and the SCSI status indicates that the
675 * command was never started, change the data underrun
676 * to success
677 */
678 if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
679 (scsi_status == MPI_SCSI_STATUS_BUSY ||
680 scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT ||
681 scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) {
682 status = MPI_IOCSTATUS_SUCCESS;
683 }
684
685 if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)
686 mptscsih_copy_sense_data(sc, hd, mf, pScsiReply);
687
688 /*
689 * Look for + dump FCP ResponseInfo[]!
690 */
691 if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID &&
692 pScsiReply->ResponseInfo) {
693 printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] "
694 "FCP_ResponseInfo=%08xh\n", ioc->name,
695 sc->device->host->host_no, sc->device->channel,
696 sc->device->id, sc->device->lun,
697 le32_to_cpu(pScsiReply->ResponseInfo));
698 }
699
700 switch(status) {
701 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
702 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
703 /* CHECKME!
704 * Maybe: DRIVER_BUSY | SUGGEST_RETRY | DID_SOFT_ERROR (retry)
705 * But not: DID_BUS_BUSY lest one risk
706 * killing interrupt handler:-(
707 */
708 sc->result = SAM_STAT_BUSY;
709 break;
710
711 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
712 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
713 sc->result = DID_BAD_TARGET << 16;
714 break;
715
716 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
717 /* Spoof to SCSI Selection Timeout! */
718 if (ioc->bus_type != FC)
719 sc->result = DID_NO_CONNECT << 16;
720 /* else fibre, just stall until rescan event */
721 else
722 sc->result = DID_REQUEUE << 16;
723
724 if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
725 hd->sel_timeout[pScsiReq->TargetID]++;
726
727 vdevice = sc->device->hostdata;
728 if (!vdevice)
729 break;
730 vtarget = vdevice->vtarget;
731 if (vtarget->tflags & MPT_TARGET_FLAGS_LED_ON) {
732 mptscsih_issue_sep_command(ioc, vtarget,
733 MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED);
734 vtarget->tflags &= ~MPT_TARGET_FLAGS_LED_ON;
735 }
736 break;
737
738 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
739 if ( ioc->bus_type == SAS ) {
740 u16 ioc_status =
741 le16_to_cpu(pScsiReply->IOCStatus);
742 if ((ioc_status &
743 MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
744 &&
745 ((log_info & SAS_LOGINFO_MASK) ==
746 SAS_LOGINFO_NEXUS_LOSS)) {
747 VirtDevice *vdevice =
748 sc->device->hostdata;
749
750 /* flag the device as being in
751 * device removal delay so we can
752 * notify the midlayer to hold off
753 * on timeout eh */
754 if (vdevice && vdevice->
755 vtarget &&
756 vdevice->vtarget->
757 raidVolume)
758 printk(KERN_INFO
759 "Skipping Raid Volume"
760 "for inDMD\n");
761 else if (vdevice &&
762 vdevice->vtarget)
763 vdevice->vtarget->
764 inDMD = 1;
765
766 sc->result =
767 (DID_TRANSPORT_DISRUPTED
768 << 16);
769 break;
770 }
771 } else if (ioc->bus_type == FC) {
772 /*
773 * The FC IOC may kill a request for variety of
774 * reasons, some of which may be recovered by a
775 * retry, some which are unlikely to be
776 * recovered. Return DID_ERROR instead of
777 * DID_RESET to permit retry of the command,
778 * just not an infinite number of them
779 */
780 sc->result = DID_ERROR << 16;
781 break;
782 }
783
784 /*
785 * Allow non-SAS & non-NEXUS_LOSS to drop into below code
786 */
787 fallthrough;
788
789 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
790 /* Linux handles an unsolicited DID_RESET better
791 * than an unsolicited DID_ABORT.
792 */
793 sc->result = DID_RESET << 16;
794 break;
795
796 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
797 if (ioc->bus_type == FC)
798 sc->result = DID_ERROR << 16;
799 else
800 sc->result = DID_RESET << 16;
801 break;
802
803 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
804 scsi_set_resid(sc, scsi_bufflen(sc) - xfer_cnt);
805 if((xfer_cnt==0)||(sc->underflow > xfer_cnt))
806 sc->result=DID_SOFT_ERROR << 16;
807 else /* Sufficient data transfer occurred */
808 sc->result = (DID_OK << 16) | scsi_status;
809 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
810 "RESIDUAL_MISMATCH: result=%x on channel=%d id=%d\n",
811 ioc->name, sc->result, sc->device->channel, sc->device->id));
812 break;
813
814 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
815 /*
816 * Do upfront check for valid SenseData and give it
817 * precedence!
818 */
819 sc->result = (DID_OK << 16) | scsi_status;
820 if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
821
822 /*
823 * For an Errata on LSI53C1030
824 * When the length of request data
825 * and transfer data are different
826 * with result of command (READ or VERIFY),
827 * DID_SOFT_ERROR is set.
828 */
829 if (ioc->bus_type == SPI) {
830 if ((pScsiReq->CDB[0] == READ_6 && ((pScsiReq->CDB[1] & 0x02) == 0)) ||
831 pScsiReq->CDB[0] == READ_10 ||
832 pScsiReq->CDB[0] == READ_12 ||
833 (pScsiReq->CDB[0] == READ_16 &&
834 ((pScsiReq->CDB[1] & 0x02) == 0)) ||
835 pScsiReq->CDB[0] == VERIFY ||
836 pScsiReq->CDB[0] == VERIFY_16) {
837 if (scsi_bufflen(sc) !=
838 xfer_cnt) {
839 sc->result =
840 DID_SOFT_ERROR << 16;
841 printk(KERN_WARNING "Errata"
842 "on LSI53C1030 occurred."
843 "sc->req_bufflen=0x%02x,"
844 "xfer_cnt=0x%02x\n",
845 scsi_bufflen(sc),
846 xfer_cnt);
847 }
848 }
849 }
850
851 if (xfer_cnt < sc->underflow) {
852 if (scsi_status == SAM_STAT_BUSY)
853 sc->result = SAM_STAT_BUSY;
854 else
855 sc->result = DID_SOFT_ERROR << 16;
856 }
857 if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) {
858 /* What to do?
859 */
860 sc->result = DID_SOFT_ERROR << 16;
861 }
862 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
863 /* Not real sure here either... */
864 sc->result = DID_RESET << 16;
865 }
866 }
867
868
869 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
870 " sc->underflow={report ERR if < %02xh bytes xfer'd}\n",
871 ioc->name, sc->underflow));
872 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
873 " ActBytesXferd=%02xh\n", ioc->name, xfer_cnt));
874
875 /* Report Queue Full
876 */
877 if (scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)
878 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
879
880 break;
881
882 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
883 scsi_set_resid(sc, 0);
884 fallthrough;
885 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
886 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
887 sc->result = (DID_OK << 16) | scsi_status;
888 if (scsi_state == 0) {
889 ;
890 } else if (scsi_state &
891 MPI_SCSI_STATE_AUTOSENSE_VALID) {
892
893 /*
894 * For potential trouble on LSI53C1030.
895 * (date:2007.xx.)
896 * It is checked whether the length of
897 * request data is equal to
898 * the length of transfer and residual.
899 * MEDIUM_ERROR is set by incorrect data.
900 */
901 if ((ioc->bus_type == SPI) &&
902 (sc->sense_buffer[2] & 0x20)) {
903 u32 difftransfer;
904 difftransfer =
905 sc->sense_buffer[3] << 24 |
906 sc->sense_buffer[4] << 16 |
907 sc->sense_buffer[5] << 8 |
908 sc->sense_buffer[6];
909 if (((sc->sense_buffer[3] & 0x80) ==
910 0x80) && (scsi_bufflen(sc)
911 != xfer_cnt)) {
912 sc->sense_buffer[2] =
913 MEDIUM_ERROR;
914 sc->sense_buffer[12] = 0xff;
915 sc->sense_buffer[13] = 0xff;
916 printk(KERN_WARNING"Errata"
917 "on LSI53C1030 occurred."
918 "sc->req_bufflen=0x%02x,"
919 "xfer_cnt=0x%02x\n" ,
920 scsi_bufflen(sc),
921 xfer_cnt);
922 }
923 if (((sc->sense_buffer[3] & 0x80)
924 != 0x80) &&
925 (scsi_bufflen(sc) !=
926 xfer_cnt + difftransfer)) {
927 sc->sense_buffer[2] =
928 MEDIUM_ERROR;
929 sc->sense_buffer[12] = 0xff;
930 sc->sense_buffer[13] = 0xff;
931 printk(KERN_WARNING
932 "Errata on LSI53C1030 occurred"
933 "sc->req_bufflen=0x%02x,"
934 " xfer_cnt=0x%02x,"
935 "difftransfer=0x%02x\n",
936 scsi_bufflen(sc),
937 xfer_cnt,
938 difftransfer);
939 }
940 }
941
942 /*
943 * If running against circa 200003dd 909 MPT f/w,
944 * may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
945 * (QUEUE_FULL) returned from device! --> get 0x0000?128
946 * and with SenseBytes set to 0.
947 */
948 if (pScsiReply->SCSIStatus == MPI_SCSI_STATUS_TASK_SET_FULL)
949 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
950
951 }
952 else if (scsi_state &
953 (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)
954 ) {
955 /*
956 * What to do?
957 */
958 sc->result = DID_SOFT_ERROR << 16;
959 }
960 else if (scsi_state & MPI_SCSI_STATE_TERMINATED) {
961 /* Not real sure here either... */
962 sc->result = DID_RESET << 16;
963 }
964 else if (scsi_state & MPI_SCSI_STATE_QUEUE_TAG_REJECTED) {
965 /* Device Inq. data indicates that it supports
966 * QTags, but rejects QTag messages.
967 * This command completed OK.
968 *
969 * Not real sure here either so do nothing... */
970 }
971
972 if (sc->result == MPI_SCSI_STATUS_TASK_SET_FULL)
973 mptscsih_report_queue_full(sc, pScsiReply, pScsiReq);
974
975 /* Add handling of:
976 * Reservation Conflict, Busy,
977 * Command Terminated, CHECK
978 */
979 break;
980
981 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
982 sc->result = DID_SOFT_ERROR << 16;
983 break;
984
985 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
986 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
987 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
988 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
989 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
990 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
991 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
992 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
993 default:
994 /*
995 * What to do?
996 */
997 sc->result = DID_SOFT_ERROR << 16;
998 break;
999
1000 } /* switch(status) */
1001
1002#ifdef CONFIG_FUSION_LOGGING
1003 if (sc->result && (ioc->debug_level & MPT_DEBUG_REPLY))
1004 mptscsih_info_scsiio(ioc, sc, pScsiReply);
1005#endif
1006
1007 } /* end of address reply case */
1008out:
1009 /* Unmap the DMA buffers, if any. */
1010 scsi_dma_unmap(sc);
1011
1012 sc->scsi_done(sc); /* Issue the command callback */
1013
1014 /* Free Chain buffers */
1015 mptscsih_freeChainBuffers(ioc, req_idx);
1016 return 1;
1017}
1018
1019/*
1020 * mptscsih_flush_running_cmds - For each command found, search
1021 * Scsi_Host instance taskQ and reply to OS.
1022 * Called only if recovering from a FW reload.
1023 * @hd: Pointer to a SCSI HOST structure
1024 *
1025 * Returns: None.
1026 *
1027 * Must be called while new I/Os are being queued.
1028 */
1029void
1030mptscsih_flush_running_cmds(MPT_SCSI_HOST *hd)
1031{
1032 MPT_ADAPTER *ioc = hd->ioc;
1033 struct scsi_cmnd *sc;
1034 SCSIIORequest_t *mf = NULL;
1035 int ii;
1036 int channel, id;
1037
1038 for (ii= 0; ii < ioc->req_depth; ii++) {
1039 sc = mptscsih_getclear_scsi_lookup(ioc, ii);
1040 if (!sc)
1041 continue;
1042 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1043 if (!mf)
1044 continue;
1045 channel = mf->Bus;
1046 id = mf->TargetID;
1047 mptscsih_freeChainBuffers(ioc, ii);
1048 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1049 if ((unsigned char *)mf != sc->host_scribble)
1050 continue;
1051 scsi_dma_unmap(sc);
1052 sc->result = DID_RESET << 16;
1053 sc->host_scribble = NULL;
1054 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
1055 "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
1056 "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
1057 sc->scsi_done(sc);
1058 }
1059}
1060EXPORT_SYMBOL(mptscsih_flush_running_cmds);
1061
1062/*
1063 * mptscsih_search_running_cmds - Delete any commands associated
1064 * with the specified target and lun. Function called only
1065 * when a lun is disable by mid-layer.
1066 * Do NOT access the referenced scsi_cmnd structure or
1067 * members. Will cause either a paging or NULL ptr error.
1068 * (BUT, BUT, BUT, the code does reference it! - mdr)
1069 * @hd: Pointer to a SCSI HOST structure
1070 * @vdevice: per device private data
1071 *
1072 * Returns: None.
1073 *
1074 * Called from slave_destroy.
1075 */
1076static void
1077mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
1078{
1079 SCSIIORequest_t *mf = NULL;
1080 int ii;
1081 struct scsi_cmnd *sc;
1082 struct scsi_lun lun;
1083 MPT_ADAPTER *ioc = hd->ioc;
1084 unsigned long flags;
1085
1086 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1087 for (ii = 0; ii < ioc->req_depth; ii++) {
1088 if ((sc = ioc->ScsiLookup[ii]) != NULL) {
1089
1090 mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(ioc, ii);
1091 if (mf == NULL)
1092 continue;
1093 /* If the device is a hidden raid component, then its
1094 * expected that the mf->function will be RAID_SCSI_IO
1095 */
1096 if (vdevice->vtarget->tflags &
1097 MPT_TARGET_FLAGS_RAID_COMPONENT && mf->Function !=
1098 MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)
1099 continue;
1100
1101 int_to_scsilun(vdevice->lun, &lun);
1102 if ((mf->Bus != vdevice->vtarget->channel) ||
1103 (mf->TargetID != vdevice->vtarget->id) ||
1104 memcmp(lun.scsi_lun, mf->LUN, 8))
1105 continue;
1106
1107 if ((unsigned char *)mf != sc->host_scribble)
1108 continue;
1109 ioc->ScsiLookup[ii] = NULL;
1110 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1111 mptscsih_freeChainBuffers(ioc, ii);
1112 mpt_free_msg_frame(ioc, (MPT_FRAME_HDR *)mf);
1113 scsi_dma_unmap(sc);
1114 sc->host_scribble = NULL;
1115 sc->result = DID_NO_CONNECT << 16;
1116 dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
1117 MYIOC_s_FMT "completing cmds: fw_channel %d, "
1118 "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
1119 vdevice->vtarget->channel, vdevice->vtarget->id,
1120 sc, mf, ii));
1121 sc->scsi_done(sc);
1122 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1123 }
1124 }
1125 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1126 return;
1127}
1128
1129/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1130
1131/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1132/*
1133 * mptscsih_report_queue_full - Report QUEUE_FULL status returned
1134 * from a SCSI target device.
1135 * @sc: Pointer to scsi_cmnd structure
1136 * @pScsiReply: Pointer to SCSIIOReply_t
1137 * @pScsiReq: Pointer to original SCSI request
1138 *
1139 * This routine periodically reports QUEUE_FULL status returned from a
1140 * SCSI target device. It reports this to the console via kernel
1141 * printk() API call, not more than once every 10 seconds.
1142 */
1143static void
1144mptscsih_report_queue_full(struct scsi_cmnd *sc, SCSIIOReply_t *pScsiReply, SCSIIORequest_t *pScsiReq)
1145{
1146 long time = jiffies;
1147 MPT_SCSI_HOST *hd;
1148 MPT_ADAPTER *ioc;
1149
1150 if (sc->device == NULL)
1151 return;
1152 if (sc->device->host == NULL)
1153 return;
1154 if ((hd = shost_priv(sc->device->host)) == NULL)
1155 return;
1156 ioc = hd->ioc;
1157 if (time - hd->last_queue_full > 10 * HZ) {
1158 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n",
1159 ioc->name, 0, sc->device->id, sc->device->lun));
1160 hd->last_queue_full = time;
1161 }
1162}
1163
1164/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1165/*
1166 * mptscsih_remove - Removed scsi devices
1167 * @pdev: Pointer to pci_dev structure
1168 *
1169 *
1170 */
1171void
1172mptscsih_remove(struct pci_dev *pdev)
1173{
1174 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1175 struct Scsi_Host *host = ioc->sh;
1176 MPT_SCSI_HOST *hd;
1177 int sz1;
1178
1179 if((hd = shost_priv(host)) == NULL)
1180 return;
1181
1182 mptscsih_shutdown(pdev);
1183
1184 sz1=0;
1185
1186 if (ioc->ScsiLookup != NULL) {
1187 sz1 = ioc->req_depth * sizeof(void *);
1188 kfree(ioc->ScsiLookup);
1189 ioc->ScsiLookup = NULL;
1190 }
1191
1192 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1193 "Free'd ScsiLookup (%d) memory\n",
1194 ioc->name, sz1));
1195
1196 kfree(hd->info_kbuf);
1197
1198 /* NULL the Scsi_Host pointer
1199 */
1200 ioc->sh = NULL;
1201
1202 scsi_host_put(host);
1203
1204 mpt_detach(pdev);
1205
1206}
1207
1208/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1209/*
1210 * mptscsih_shutdown - reboot notifier
1211 *
1212 */
1213void
1214mptscsih_shutdown(struct pci_dev *pdev)
1215{
1216}
1217
1218#ifdef CONFIG_PM
1219/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1220/*
1221 * mptscsih_suspend - Fusion MPT scsi driver suspend routine.
1222 *
1223 *
1224 */
1225int
1226mptscsih_suspend(struct pci_dev *pdev, pm_message_t state)
1227{
1228 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1229
1230 scsi_block_requests(ioc->sh);
1231 flush_scheduled_work();
1232 mptscsih_shutdown(pdev);
1233 return mpt_suspend(pdev,state);
1234}
1235
1236/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1237/*
1238 * mptscsih_resume - Fusion MPT scsi driver resume routine.
1239 *
1240 *
1241 */
1242int
1243mptscsih_resume(struct pci_dev *pdev)
1244{
1245 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
1246 int rc;
1247
1248 rc = mpt_resume(pdev);
1249 scsi_unblock_requests(ioc->sh);
1250 return rc;
1251}
1252
1253#endif
1254
1255/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1256/**
1257 * mptscsih_info - Return information about MPT adapter
1258 * @SChost: Pointer to Scsi_Host structure
1259 *
1260 * (linux scsi_host_template.info routine)
1261 *
1262 * Returns pointer to buffer where information was written.
1263 */
1264const char *
1265mptscsih_info(struct Scsi_Host *SChost)
1266{
1267 MPT_SCSI_HOST *h;
1268 int size = 0;
1269
1270 h = shost_priv(SChost);
1271
1272 if (h->info_kbuf == NULL)
1273 if ((h->info_kbuf = kmalloc(0x1000 /* 4Kb */, GFP_KERNEL)) == NULL)
1274 return h->info_kbuf;
1275 h->info_kbuf[0] = '\0';
1276
1277 mpt_print_ioc_summary(h->ioc, h->info_kbuf, &size, 0, 0);
1278 h->info_kbuf[size-1] = '\0';
1279
1280 return h->info_kbuf;
1281}
1282
1283int mptscsih_show_info(struct seq_file *m, struct Scsi_Host *host)
1284{
1285 MPT_SCSI_HOST *hd = shost_priv(host);
1286 MPT_ADAPTER *ioc = hd->ioc;
1287
1288 seq_printf(m, "%s: %s, ", ioc->name, ioc->prod_name);
1289 seq_printf(m, "%s%08xh, ", MPT_FW_REV_MAGIC_ID_STRING, ioc->facts.FWVersion.Word);
1290 seq_printf(m, "Ports=%d, ", ioc->facts.NumberOfPorts);
1291 seq_printf(m, "MaxQ=%d\n", ioc->req_depth);
1292
1293 return 0;
1294}
1295
1296/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1297#define ADD_INDEX_LOG(req_ent) do { } while(0)
1298
1299/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1300/**
1301 * mptscsih_qcmd - Primary Fusion MPT SCSI initiator IO start routine.
1302 * @SCpnt: Pointer to scsi_cmnd structure
1303 *
1304 * (linux scsi_host_template.queuecommand routine)
1305 * This is the primary SCSI IO start routine. Create a MPI SCSIIORequest
1306 * from a linux scsi_cmnd request and send it to the IOC.
1307 *
1308 * Returns 0. (rtn value discarded by linux scsi mid-layer)
1309 */
1310int
1311mptscsih_qcmd(struct scsi_cmnd *SCpnt)
1312{
1313 MPT_SCSI_HOST *hd;
1314 MPT_FRAME_HDR *mf;
1315 SCSIIORequest_t *pScsiReq;
1316 VirtDevice *vdevice = SCpnt->device->hostdata;
1317 u32 datalen;
1318 u32 scsictl;
1319 u32 scsidir;
1320 u32 cmd_len;
1321 int my_idx;
1322 int ii;
1323 MPT_ADAPTER *ioc;
1324
1325 hd = shost_priv(SCpnt->device->host);
1326 ioc = hd->ioc;
1327
1328 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n",
1329 ioc->name, SCpnt));
1330
1331 if (ioc->taskmgmt_quiesce_io)
1332 return SCSI_MLQUEUE_HOST_BUSY;
1333
1334 /*
1335 * Put together a MPT SCSI request...
1336 */
1337 if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
1338 dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
1339 ioc->name));
1340 return SCSI_MLQUEUE_HOST_BUSY;
1341 }
1342
1343 pScsiReq = (SCSIIORequest_t *) mf;
1344
1345 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
1346
1347 ADD_INDEX_LOG(my_idx);
1348
1349 /* TUR's being issued with scsictl=0x02000000 (DATA_IN)!
1350 * Seems we may receive a buffer (datalen>0) even when there
1351 * will be no data transfer! GRRRRR...
1352 */
1353 if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
1354 datalen = scsi_bufflen(SCpnt);
1355 scsidir = MPI_SCSIIO_CONTROL_READ; /* DATA IN (host<--ioc<--dev) */
1356 } else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
1357 datalen = scsi_bufflen(SCpnt);
1358 scsidir = MPI_SCSIIO_CONTROL_WRITE; /* DATA OUT (host-->ioc-->dev) */
1359 } else {
1360 datalen = 0;
1361 scsidir = MPI_SCSIIO_CONTROL_NODATATRANSFER;
1362 }
1363
1364 /* Default to untagged. Once a target structure has been allocated,
1365 * use the Inquiry data to determine if device supports tagged.
1366 */
1367 if ((vdevice->vtarget->tflags & MPT_TARGET_FLAGS_Q_YES) &&
1368 SCpnt->device->tagged_supported)
1369 scsictl = scsidir | MPI_SCSIIO_CONTROL_SIMPLEQ;
1370 else
1371 scsictl = scsidir | MPI_SCSIIO_CONTROL_UNTAGGED;
1372
1373
1374 /* Use the above information to set up the message frame
1375 */
1376 pScsiReq->TargetID = (u8) vdevice->vtarget->id;
1377 pScsiReq->Bus = vdevice->vtarget->channel;
1378 pScsiReq->ChainOffset = 0;
1379 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
1380 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
1381 else
1382 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
1383 pScsiReq->CDBLength = SCpnt->cmd_len;
1384 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
1385 pScsiReq->Reserved = 0;
1386 pScsiReq->MsgFlags = mpt_msg_flags(ioc);
1387 int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
1388 pScsiReq->Control = cpu_to_le32(scsictl);
1389
1390 /*
1391 * Write SCSI CDB into the message
1392 */
1393 cmd_len = SCpnt->cmd_len;
1394 for (ii=0; ii < cmd_len; ii++)
1395 pScsiReq->CDB[ii] = SCpnt->cmnd[ii];
1396
1397 for (ii=cmd_len; ii < 16; ii++)
1398 pScsiReq->CDB[ii] = 0;
1399
1400 /* DataLength */
1401 pScsiReq->DataLength = cpu_to_le32(datalen);
1402
1403 /* SenseBuffer low address */
1404 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
1405 + (my_idx * MPT_SENSE_BUFFER_ALLOC));
1406
1407 /* Now add the SG list
1408 * Always have a SGE even if null length.
1409 */
1410 if (datalen == 0) {
1411 /* Add a NULL SGE */
1412 ioc->add_sge((char *)&pScsiReq->SGL,
1413 MPT_SGE_FLAGS_SSIMPLE_READ | 0,
1414 (dma_addr_t) -1);
1415 } else {
1416 /* Add a 32 or 64 bit SGE */
1417 if (mptscsih_AddSGE(ioc, SCpnt, pScsiReq, my_idx) != SUCCESS)
1418 goto fail;
1419 }
1420
1421 SCpnt->host_scribble = (unsigned char *)mf;
1422 mptscsih_set_scsi_lookup(ioc, my_idx, SCpnt);
1423
1424 mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
1425 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
1426 ioc->name, SCpnt, mf, my_idx));
1427 DBG_DUMP_REQUEST_FRAME(ioc, (u32 *)mf);
1428 return 0;
1429
1430 fail:
1431 mptscsih_freeChainBuffers(ioc, my_idx);
1432 mpt_free_msg_frame(ioc, mf);
1433 return SCSI_MLQUEUE_HOST_BUSY;
1434}
1435
1436/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1437/*
1438 * mptscsih_freeChainBuffers - Function to free chain buffers associated
1439 * with a SCSI IO request
1440 * @hd: Pointer to the MPT_SCSI_HOST instance
1441 * @req_idx: Index of the SCSI IO request frame.
1442 *
1443 * Called if SG chain buffer allocation fails and mptscsih callbacks.
1444 * No return.
1445 */
1446static void
1447mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx)
1448{
1449 MPT_FRAME_HDR *chain;
1450 unsigned long flags;
1451 int chain_idx;
1452 int next;
1453
1454 /* Get the first chain index and reset
1455 * tracker state.
1456 */
1457 chain_idx = ioc->ReqToChain[req_idx];
1458 ioc->ReqToChain[req_idx] = MPT_HOST_NO_CHAIN;
1459
1460 while (chain_idx != MPT_HOST_NO_CHAIN) {
1461
1462 /* Save the next chain buffer index */
1463 next = ioc->ChainToChain[chain_idx];
1464
1465 /* Free this chain buffer and reset
1466 * tracker
1467 */
1468 ioc->ChainToChain[chain_idx] = MPT_HOST_NO_CHAIN;
1469
1470 chain = (MPT_FRAME_HDR *) (ioc->ChainBuffer
1471 + (chain_idx * ioc->req_sz));
1472
1473 spin_lock_irqsave(&ioc->FreeQlock, flags);
1474 list_add_tail(&chain->u.frame.linkage.list, &ioc->FreeChainQ);
1475 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1476
1477 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n",
1478 ioc->name, chain_idx));
1479
1480 /* handle next */
1481 chain_idx = next;
1482 }
1483 return;
1484}
1485
1486/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1487/*
1488 * Reset Handling
1489 */
1490
1491/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1492/**
1493 * mptscsih_IssueTaskMgmt - Generic send Task Management function.
1494 * @hd: Pointer to MPT_SCSI_HOST structure
1495 * @type: Task Management type
1496 * @channel: channel number for task management
1497 * @id: Logical Target ID for reset (if appropriate)
1498 * @lun: Logical Unit for reset (if appropriate)
1499 * @ctx2abort: Context for the task to be aborted (if appropriate)
1500 * @timeout: timeout for task management control
1501 *
1502 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
1503 * or a non-interrupt thread. In the former, must not call schedule().
1504 *
1505 * Not all fields are meaningfull for all task types.
1506 *
1507 * Returns 0 for SUCCESS, or FAILED.
1508 *
1509 **/
1510int
1511mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, u64 lun,
1512 int ctx2abort, ulong timeout)
1513{
1514 MPT_FRAME_HDR *mf;
1515 SCSITaskMgmt_t *pScsiTm;
1516 int ii;
1517 int retval;
1518 MPT_ADAPTER *ioc = hd->ioc;
1519 unsigned long timeleft;
1520 u8 issue_hard_reset;
1521 u32 ioc_raw_state;
1522 unsigned long time_count;
1523
1524 issue_hard_reset = 0;
1525 ioc_raw_state = mpt_GetIocState(ioc, 0);
1526
1527 if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
1528 printk(MYIOC_s_WARN_FMT
1529 "TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
1530 ioc->name, type, ioc_raw_state);
1531 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
1532 ioc->name, __func__);
1533 if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
1534 printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
1535 "FAILED!!\n", ioc->name);
1536 return 0;
1537 }
1538
1539 /* DOORBELL ACTIVE check is not required if
1540 * MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q is supported.
1541 */
1542
1543 if (!((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q)
1544 && (ioc->facts.MsgVersion >= MPI_VERSION_01_05)) &&
1545 (ioc_raw_state & MPI_DOORBELL_ACTIVE)) {
1546 printk(MYIOC_s_WARN_FMT
1547 "TaskMgmt type=%x: ioc_state: "
1548 "DOORBELL_ACTIVE (0x%x)!\n",
1549 ioc->name, type, ioc_raw_state);
1550 return FAILED;
1551 }
1552
1553 mutex_lock(&ioc->taskmgmt_cmds.mutex);
1554 if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
1555 mf = NULL;
1556 retval = FAILED;
1557 goto out;
1558 }
1559
1560 /* Return Fail to calling function if no message frames available.
1561 */
1562 if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
1563 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1564 "TaskMgmt no msg frames!!\n", ioc->name));
1565 retval = FAILED;
1566 mpt_clear_taskmgmt_in_progress_flag(ioc);
1567 goto out;
1568 }
1569 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
1570 ioc->name, mf));
1571
1572 /* Format the Request
1573 */
1574 pScsiTm = (SCSITaskMgmt_t *) mf;
1575 pScsiTm->TargetID = id;
1576 pScsiTm->Bus = channel;
1577 pScsiTm->ChainOffset = 0;
1578 pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
1579
1580 pScsiTm->Reserved = 0;
1581 pScsiTm->TaskType = type;
1582 pScsiTm->Reserved1 = 0;
1583 pScsiTm->MsgFlags = (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS)
1584 ? MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION : 0;
1585
1586 int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
1587
1588 for (ii=0; ii < 7; ii++)
1589 pScsiTm->Reserved2[ii] = 0;
1590
1591 pScsiTm->TaskMsgContext = ctx2abort;
1592
1593 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
1594 "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
1595 type, timeout));
1596
1597 DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
1598
1599 INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1600 time_count = jiffies;
1601 if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
1602 (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
1603 mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
1604 else {
1605 retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
1606 sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
1607 if (retval) {
1608 dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
1609 "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
1610 ioc->name, mf, retval));
1611 mpt_free_msg_frame(ioc, mf);
1612 mpt_clear_taskmgmt_in_progress_flag(ioc);
1613 goto out;
1614 }
1615 }
1616
1617 timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
1618 timeout*HZ);
1619 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
1620 retval = FAILED;
1621 dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
1622 "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
1623 mpt_clear_taskmgmt_in_progress_flag(ioc);
1624 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
1625 goto out;
1626 issue_hard_reset = 1;
1627 goto out;
1628 }
1629
1630 retval = mptscsih_taskmgmt_reply(ioc, type,
1631 (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
1632
1633 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1634 "TaskMgmt completed (%d seconds)\n",
1635 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
1636
1637 out:
1638
1639 CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
1640 if (issue_hard_reset) {
1641 printk(MYIOC_s_WARN_FMT
1642 "Issuing Reset from %s!! doorbell=0x%08x\n",
1643 ioc->name, __func__, mpt_GetIocState(ioc, 0));
1644 retval = (ioc->bus_type == SAS) ?
1645 mpt_HardResetHandler(ioc, CAN_SLEEP) :
1646 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1647 mpt_free_msg_frame(ioc, mf);
1648 }
1649
1650 retval = (retval == 0) ? 0 : FAILED;
1651 mutex_unlock(&ioc->taskmgmt_cmds.mutex);
1652 return retval;
1653}
1654EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
1655
1656static int
1657mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
1658{
1659 switch (ioc->bus_type) {
1660 case FC:
1661 return 40;
1662 case SAS:
1663 return 30;
1664 case SPI:
1665 default:
1666 return 10;
1667 }
1668}
1669
1670/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1671/**
1672 * mptscsih_abort - Abort linux scsi_cmnd routine, new_eh variant
1673 * @SCpnt: Pointer to scsi_cmnd structure, IO to be aborted
1674 *
1675 * (linux scsi_host_template.eh_abort_handler routine)
1676 *
1677 * Returns SUCCESS or FAILED.
1678 **/
1679int
1680mptscsih_abort(struct scsi_cmnd * SCpnt)
1681{
1682 MPT_SCSI_HOST *hd;
1683 MPT_FRAME_HDR *mf;
1684 u32 ctx2abort;
1685 int scpnt_idx;
1686 int retval;
1687 VirtDevice *vdevice;
1688 MPT_ADAPTER *ioc;
1689
1690 /* If we can't locate our host adapter structure, return FAILED status.
1691 */
1692 if ((hd = shost_priv(SCpnt->device->host)) == NULL) {
1693 SCpnt->result = DID_RESET << 16;
1694 SCpnt->scsi_done(SCpnt);
1695 printk(KERN_ERR MYNAM ": task abort: "
1696 "can't locate host! (sc=%p)\n", SCpnt);
1697 return FAILED;
1698 }
1699
1700 ioc = hd->ioc;
1701 printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
1702 ioc->name, SCpnt);
1703 scsi_print_command(SCpnt);
1704
1705 vdevice = SCpnt->device->hostdata;
1706 if (!vdevice || !vdevice->vtarget) {
1707 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1708 "task abort: device has been deleted (sc=%p)\n",
1709 ioc->name, SCpnt));
1710 SCpnt->result = DID_NO_CONNECT << 16;
1711 SCpnt->scsi_done(SCpnt);
1712 retval = SUCCESS;
1713 goto out;
1714 }
1715
1716 /* Task aborts are not supported for hidden raid components.
1717 */
1718 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1719 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1720 "task abort: hidden raid component (sc=%p)\n",
1721 ioc->name, SCpnt));
1722 SCpnt->result = DID_RESET << 16;
1723 retval = FAILED;
1724 goto out;
1725 }
1726
1727 /* Task aborts are not supported for volumes.
1728 */
1729 if (vdevice->vtarget->raidVolume) {
1730 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1731 "task abort: raid volume (sc=%p)\n",
1732 ioc->name, SCpnt));
1733 SCpnt->result = DID_RESET << 16;
1734 retval = FAILED;
1735 goto out;
1736 }
1737
1738 /* Find this command
1739 */
1740 if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(ioc, SCpnt)) < 0) {
1741 /* Cmd not found in ScsiLookup.
1742 * Do OS callback.
1743 */
1744 SCpnt->result = DID_RESET << 16;
1745 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
1746 "Command not in the active list! (sc=%p)\n", ioc->name,
1747 SCpnt));
1748 retval = SUCCESS;
1749 goto out;
1750 }
1751
1752 if (ioc->timeouts < -1)
1753 ioc->timeouts++;
1754
1755 if (mpt_fwfault_debug)
1756 mpt_halt_firmware(ioc);
1757
1758 /* Most important! Set TaskMsgContext to SCpnt's MsgContext!
1759 * (the IO to be ABORT'd)
1760 *
1761 * NOTE: Since we do not byteswap MsgContext, we do not
1762 * swap it here either. It is an opaque cookie to
1763 * the controller, so it does not matter. -DaveM
1764 */
1765 mf = MPT_INDEX_2_MFPTR(ioc, scpnt_idx);
1766 ctx2abort = mf->u.frame.hwhdr.msgctxu.MsgContext;
1767 retval = mptscsih_IssueTaskMgmt(hd,
1768 MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
1769 vdevice->vtarget->channel,
1770 vdevice->vtarget->id, vdevice->lun,
1771 ctx2abort, mptscsih_get_tm_timeout(ioc));
1772
1773 if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx) {
1774 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1775 "task abort: command still in active list! (sc=%p)\n",
1776 ioc->name, SCpnt));
1777 retval = FAILED;
1778 } else {
1779 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1780 "task abort: command cleared from active list! (sc=%p)\n",
1781 ioc->name, SCpnt));
1782 retval = SUCCESS;
1783 }
1784
1785 out:
1786 printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
1787 ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), retval,
1788 SCpnt);
1789
1790 return retval;
1791}
1792
1793/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1794/**
1795 * mptscsih_dev_reset - Perform a SCSI TARGET_RESET! new_eh variant
1796 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1797 *
1798 * (linux scsi_host_template.eh_dev_reset_handler routine)
1799 *
1800 * Returns SUCCESS or FAILED.
1801 **/
1802int
1803mptscsih_dev_reset(struct scsi_cmnd * SCpnt)
1804{
1805 MPT_SCSI_HOST *hd;
1806 int retval;
1807 VirtDevice *vdevice;
1808 MPT_ADAPTER *ioc;
1809
1810 /* If we can't locate our host adapter structure, return FAILED status.
1811 */
1812 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1813 printk(KERN_ERR MYNAM ": target reset: "
1814 "Can't locate host! (sc=%p)\n", SCpnt);
1815 return FAILED;
1816 }
1817
1818 ioc = hd->ioc;
1819 printk(MYIOC_s_INFO_FMT "attempting target reset! (sc=%p)\n",
1820 ioc->name, SCpnt);
1821 scsi_print_command(SCpnt);
1822
1823 vdevice = SCpnt->device->hostdata;
1824 if (!vdevice || !vdevice->vtarget) {
1825 retval = 0;
1826 goto out;
1827 }
1828
1829 /* Target reset to hidden raid component is not supported
1830 */
1831 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1832 retval = FAILED;
1833 goto out;
1834 }
1835
1836 retval = mptscsih_IssueTaskMgmt(hd,
1837 MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
1838 vdevice->vtarget->channel,
1839 vdevice->vtarget->id, 0, 0,
1840 mptscsih_get_tm_timeout(ioc));
1841
1842 out:
1843 printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
1844 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1845
1846 if (retval == 0)
1847 return SUCCESS;
1848 else
1849 return FAILED;
1850}
1851
1852
1853/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1854/**
1855 * mptscsih_bus_reset - Perform a SCSI BUS_RESET! new_eh variant
1856 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1857 *
1858 * (linux scsi_host_template.eh_bus_reset_handler routine)
1859 *
1860 * Returns SUCCESS or FAILED.
1861 **/
1862int
1863mptscsih_bus_reset(struct scsi_cmnd * SCpnt)
1864{
1865 MPT_SCSI_HOST *hd;
1866 int retval;
1867 VirtDevice *vdevice;
1868 MPT_ADAPTER *ioc;
1869
1870 /* If we can't locate our host adapter structure, return FAILED status.
1871 */
1872 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1873 printk(KERN_ERR MYNAM ": bus reset: "
1874 "Can't locate host! (sc=%p)\n", SCpnt);
1875 return FAILED;
1876 }
1877
1878 ioc = hd->ioc;
1879 printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
1880 ioc->name, SCpnt);
1881 scsi_print_command(SCpnt);
1882
1883 if (ioc->timeouts < -1)
1884 ioc->timeouts++;
1885
1886 vdevice = SCpnt->device->hostdata;
1887 if (!vdevice || !vdevice->vtarget)
1888 return SUCCESS;
1889 retval = mptscsih_IssueTaskMgmt(hd,
1890 MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1891 vdevice->vtarget->channel, 0, 0, 0,
1892 mptscsih_get_tm_timeout(ioc));
1893
1894 printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
1895 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1896
1897 if (retval == 0)
1898 return SUCCESS;
1899 else
1900 return FAILED;
1901}
1902
1903/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1904/**
1905 * mptscsih_host_reset - Perform a SCSI host adapter RESET (new_eh variant)
1906 * @SCpnt: Pointer to scsi_cmnd structure, IO which reset is due to
1907 *
1908 * (linux scsi_host_template.eh_host_reset_handler routine)
1909 *
1910 * Returns SUCCESS or FAILED.
1911 */
1912int
1913mptscsih_host_reset(struct scsi_cmnd *SCpnt)
1914{
1915 MPT_SCSI_HOST * hd;
1916 int status = SUCCESS;
1917 MPT_ADAPTER *ioc;
1918 int retval;
1919
1920 /* If we can't locate the host to reset, then we failed. */
1921 if ((hd = shost_priv(SCpnt->device->host)) == NULL){
1922 printk(KERN_ERR MYNAM ": host reset: "
1923 "Can't locate host! (sc=%p)\n", SCpnt);
1924 return FAILED;
1925 }
1926
1927 /* make sure we have no outstanding commands at this stage */
1928 mptscsih_flush_running_cmds(hd);
1929
1930 ioc = hd->ioc;
1931 printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
1932 ioc->name, SCpnt);
1933
1934 /* If our attempts to reset the host failed, then return a failed
1935 * status. The host will be taken off line by the SCSI mid-layer.
1936 */
1937 retval = mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
1938 if (retval < 0)
1939 status = FAILED;
1940 else
1941 status = SUCCESS;
1942
1943 printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
1944 ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
1945
1946 return status;
1947}
1948
1949static int
1950mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
1951 SCSITaskMgmtReply_t *pScsiTmReply)
1952{
1953 u16 iocstatus;
1954 u32 termination_count;
1955 int retval;
1956
1957 if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
1958 retval = FAILED;
1959 goto out;
1960 }
1961
1962 DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
1963
1964 iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
1965 termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
1966
1967 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1968 "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
1969 "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
1970 "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
1971 pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
1972 le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
1973 termination_count));
1974
1975 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
1976 pScsiTmReply->ResponseCode)
1977 mptscsih_taskmgmt_response_code(ioc,
1978 pScsiTmReply->ResponseCode);
1979
1980 if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
1981 retval = 0;
1982 goto out;
1983 }
1984
1985 retval = FAILED;
1986 if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
1987 if (termination_count == 1)
1988 retval = 0;
1989 goto out;
1990 }
1991
1992 if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
1993 iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
1994 retval = 0;
1995
1996 out:
1997 return retval;
1998}
1999
2000/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2001void
2002mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
2003{
2004 char *desc;
2005
2006 switch (response_code) {
2007 case MPI_SCSITASKMGMT_RSP_TM_COMPLETE:
2008 desc = "The task completed.";
2009 break;
2010 case MPI_SCSITASKMGMT_RSP_INVALID_FRAME:
2011 desc = "The IOC received an invalid frame status.";
2012 break;
2013 case MPI_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
2014 desc = "The task type is not supported.";
2015 break;
2016 case MPI_SCSITASKMGMT_RSP_TM_FAILED:
2017 desc = "The requested task failed.";
2018 break;
2019 case MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED:
2020 desc = "The task completed successfully.";
2021 break;
2022 case MPI_SCSITASKMGMT_RSP_TM_INVALID_LUN:
2023 desc = "The LUN request is invalid.";
2024 break;
2025 case MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
2026 desc = "The task is in the IOC queue and has not been sent to target.";
2027 break;
2028 default:
2029 desc = "unknown";
2030 break;
2031 }
2032 printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
2033 ioc->name, response_code, desc);
2034}
2035EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
2036
2037/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2038/**
2039 * mptscsih_taskmgmt_complete - Registered with Fusion MPT base driver
2040 * @ioc: Pointer to MPT_ADAPTER structure
2041 * @mf: Pointer to SCSI task mgmt request frame
2042 * @mr: Pointer to SCSI task mgmt reply frame
2043 *
2044 * This routine is called from mptbase.c::mpt_interrupt() at the completion
2045 * of any SCSI task management request.
2046 * This routine is registered with the MPT (base) driver at driver
2047 * load/init time via the mpt_register() API call.
2048 *
2049 * Returns 1 indicating alloc'd request frame ptr should be freed.
2050 **/
2051int
2052mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
2053 MPT_FRAME_HDR *mr)
2054{
2055 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2056 "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
2057
2058 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2059
2060 if (!mr)
2061 goto out;
2062
2063 ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2064 memcpy(ioc->taskmgmt_cmds.reply, mr,
2065 min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
2066 out:
2067 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
2068 mpt_clear_taskmgmt_in_progress_flag(ioc);
2069 ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2070 complete(&ioc->taskmgmt_cmds.done);
2071 if (ioc->bus_type == SAS)
2072 ioc->schedule_target_reset(ioc);
2073 return 1;
2074 }
2075 return 0;
2076}
2077
2078/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2079/*
2080 * This is anyones guess quite frankly.
2081 */
2082int
2083mptscsih_bios_param(struct scsi_device * sdev, struct block_device *bdev,
2084 sector_t capacity, int geom[])
2085{
2086 int heads;
2087 int sectors;
2088 sector_t cylinders;
2089 ulong dummy;
2090
2091 heads = 64;
2092 sectors = 32;
2093
2094 dummy = heads * sectors;
2095 cylinders = capacity;
2096 sector_div(cylinders,dummy);
2097
2098 /*
2099 * Handle extended translation size for logical drives
2100 * > 1Gb
2101 */
2102 if ((ulong)capacity >= 0x200000) {
2103 heads = 255;
2104 sectors = 63;
2105 dummy = heads * sectors;
2106 cylinders = capacity;
2107 sector_div(cylinders,dummy);
2108 }
2109
2110 /* return result */
2111 geom[0] = heads;
2112 geom[1] = sectors;
2113 geom[2] = cylinders;
2114
2115 return 0;
2116}
2117
2118/* Search IOC page 3 to determine if this is hidden physical disk
2119 *
2120 */
2121int
2122mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
2123{
2124 struct inactive_raid_component_info *component_info;
2125 int i, j;
2126 RaidPhysDiskPage1_t *phys_disk;
2127 int rc = 0;
2128 int num_paths;
2129
2130 if (!ioc->raid_data.pIocPg3)
2131 goto out;
2132 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2133 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2134 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2135 rc = 1;
2136 goto out;
2137 }
2138 }
2139
2140 if (ioc->bus_type != SAS)
2141 goto out;
2142
2143 /*
2144 * Check if dual path
2145 */
2146 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2147 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2148 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2149 if (num_paths < 2)
2150 continue;
2151 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2152 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2153 if (!phys_disk)
2154 continue;
2155 if ((mpt_raid_phys_disk_pg1(ioc,
2156 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2157 phys_disk))) {
2158 kfree(phys_disk);
2159 continue;
2160 }
2161 for (j = 0; j < num_paths; j++) {
2162 if ((phys_disk->Path[j].Flags &
2163 MPI_RAID_PHYSDISK1_FLAG_INVALID))
2164 continue;
2165 if ((phys_disk->Path[j].Flags &
2166 MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2167 continue;
2168 if ((id == phys_disk->Path[j].PhysDiskID) &&
2169 (channel == phys_disk->Path[j].PhysDiskBus)) {
2170 rc = 1;
2171 kfree(phys_disk);
2172 goto out;
2173 }
2174 }
2175 kfree(phys_disk);
2176 }
2177
2178
2179 /*
2180 * Check inactive list for matching phys disks
2181 */
2182 if (list_empty(&ioc->raid_data.inactive_list))
2183 goto out;
2184
2185 mutex_lock(&ioc->raid_data.inactive_list_mutex);
2186 list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2187 list) {
2188 if ((component_info->d.PhysDiskID == id) &&
2189 (component_info->d.PhysDiskBus == channel))
2190 rc = 1;
2191 }
2192 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2193
2194 out:
2195 return rc;
2196}
2197EXPORT_SYMBOL(mptscsih_is_phys_disk);
2198
2199u8
2200mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
2201{
2202 struct inactive_raid_component_info *component_info;
2203 int i, j;
2204 RaidPhysDiskPage1_t *phys_disk;
2205 int rc = -ENXIO;
2206 int num_paths;
2207
2208 if (!ioc->raid_data.pIocPg3)
2209 goto out;
2210 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2211 if ((id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) &&
2212 (channel == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskBus)) {
2213 rc = ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum;
2214 goto out;
2215 }
2216 }
2217
2218 if (ioc->bus_type != SAS)
2219 goto out;
2220
2221 /*
2222 * Check if dual path
2223 */
2224 for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
2225 num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
2226 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
2227 if (num_paths < 2)
2228 continue;
2229 phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
2230 (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
2231 if (!phys_disk)
2232 continue;
2233 if ((mpt_raid_phys_disk_pg1(ioc,
2234 ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
2235 phys_disk))) {
2236 kfree(phys_disk);
2237 continue;
2238 }
2239 for (j = 0; j < num_paths; j++) {
2240 if ((phys_disk->Path[j].Flags &
2241 MPI_RAID_PHYSDISK1_FLAG_INVALID))
2242 continue;
2243 if ((phys_disk->Path[j].Flags &
2244 MPI_RAID_PHYSDISK1_FLAG_BROKEN))
2245 continue;
2246 if ((id == phys_disk->Path[j].PhysDiskID) &&
2247 (channel == phys_disk->Path[j].PhysDiskBus)) {
2248 rc = phys_disk->PhysDiskNum;
2249 kfree(phys_disk);
2250 goto out;
2251 }
2252 }
2253 kfree(phys_disk);
2254 }
2255
2256 /*
2257 * Check inactive list for matching phys disks
2258 */
2259 if (list_empty(&ioc->raid_data.inactive_list))
2260 goto out;
2261
2262 mutex_lock(&ioc->raid_data.inactive_list_mutex);
2263 list_for_each_entry(component_info, &ioc->raid_data.inactive_list,
2264 list) {
2265 if ((component_info->d.PhysDiskID == id) &&
2266 (component_info->d.PhysDiskBus == channel))
2267 rc = component_info->d.PhysDiskNum;
2268 }
2269 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
2270
2271 out:
2272 return rc;
2273}
2274EXPORT_SYMBOL(mptscsih_raid_id_to_num);
2275
2276/*
2277 * OS entry point to allow for host driver to free allocated memory
2278 * Called if no device present or device being unloaded
2279 */
2280void
2281mptscsih_slave_destroy(struct scsi_device *sdev)
2282{
2283 struct Scsi_Host *host = sdev->host;
2284 MPT_SCSI_HOST *hd = shost_priv(host);
2285 VirtTarget *vtarget;
2286 VirtDevice *vdevice;
2287 struct scsi_target *starget;
2288
2289 starget = scsi_target(sdev);
2290 vtarget = starget->hostdata;
2291 vdevice = sdev->hostdata;
2292 if (!vdevice)
2293 return;
2294
2295 mptscsih_search_running_cmds(hd, vdevice);
2296 vtarget->num_luns--;
2297 mptscsih_synchronize_cache(hd, vdevice);
2298 kfree(vdevice);
2299 sdev->hostdata = NULL;
2300}
2301
2302/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2303/*
2304 * mptscsih_change_queue_depth - This function will set a devices queue depth
2305 * @sdev: per scsi_device pointer
2306 * @qdepth: requested queue depth
2307 *
2308 * Adding support for new 'change_queue_depth' api.
2309*/
2310int
2311mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
2312{
2313 MPT_SCSI_HOST *hd = shost_priv(sdev->host);
2314 VirtTarget *vtarget;
2315 struct scsi_target *starget;
2316 int max_depth;
2317 MPT_ADAPTER *ioc = hd->ioc;
2318
2319 starget = scsi_target(sdev);
2320 vtarget = starget->hostdata;
2321
2322 if (ioc->bus_type == SPI) {
2323 if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
2324 max_depth = 1;
2325 else if (sdev->type == TYPE_DISK &&
2326 vtarget->minSyncFactor <= MPT_ULTRA160)
2327 max_depth = MPT_SCSI_CMD_PER_DEV_HIGH;
2328 else
2329 max_depth = MPT_SCSI_CMD_PER_DEV_LOW;
2330 } else
2331 max_depth = ioc->sh->can_queue;
2332
2333 if (!sdev->tagged_supported)
2334 max_depth = 1;
2335
2336 if (qdepth > max_depth)
2337 qdepth = max_depth;
2338
2339 return scsi_change_queue_depth(sdev, qdepth);
2340}
2341
2342/*
2343 * OS entry point to adjust the queue_depths on a per-device basis.
2344 * Called once per device the bus scan. Use it to force the queue_depth
2345 * member to 1 if a device does not support Q tags.
2346 * Return non-zero if fails.
2347 */
2348int
2349mptscsih_slave_configure(struct scsi_device *sdev)
2350{
2351 struct Scsi_Host *sh = sdev->host;
2352 VirtTarget *vtarget;
2353 VirtDevice *vdevice;
2354 struct scsi_target *starget;
2355 MPT_SCSI_HOST *hd = shost_priv(sh);
2356 MPT_ADAPTER *ioc = hd->ioc;
2357
2358 starget = scsi_target(sdev);
2359 vtarget = starget->hostdata;
2360 vdevice = sdev->hostdata;
2361
2362 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2363 "device @ %p, channel=%d, id=%d, lun=%llu\n",
2364 ioc->name, sdev, sdev->channel, sdev->id, sdev->lun));
2365 if (ioc->bus_type == SPI)
2366 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2367 "sdtr %d wdtr %d ppr %d inq length=%d\n",
2368 ioc->name, sdev->sdtr, sdev->wdtr,
2369 sdev->ppr, sdev->inquiry_len));
2370
2371 vdevice->configured_lun = 1;
2372
2373 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2374 "Queue depth=%d, tflags=%x\n",
2375 ioc->name, sdev->queue_depth, vtarget->tflags));
2376
2377 if (ioc->bus_type == SPI)
2378 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2379 "negoFlags=%x, maxOffset=%x, SyncFactor=%x\n",
2380 ioc->name, vtarget->negoFlags, vtarget->maxOffset,
2381 vtarget->minSyncFactor));
2382
2383 mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
2384 dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2385 "tagged %d, simple %d\n",
2386 ioc->name,sdev->tagged_supported, sdev->simple_tags));
2387
2388 blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
2389
2390 return 0;
2391}
2392
2393/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2394/*
2395 * Private routines...
2396 */
2397
2398/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2399/* Utility function to copy sense data from the scsi_cmnd buffer
2400 * to the FC and SCSI target structures.
2401 *
2402 */
2403static void
2404mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply)
2405{
2406 VirtDevice *vdevice;
2407 SCSIIORequest_t *pReq;
2408 u32 sense_count = le32_to_cpu(pScsiReply->SenseCount);
2409 MPT_ADAPTER *ioc = hd->ioc;
2410
2411 /* Get target structure
2412 */
2413 pReq = (SCSIIORequest_t *) mf;
2414 vdevice = sc->device->hostdata;
2415
2416 if (sense_count) {
2417 u8 *sense_data;
2418 int req_index;
2419
2420 /* Copy the sense received into the scsi command block. */
2421 req_index = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2422 sense_data = ((u8 *)ioc->sense_buf_pool + (req_index * MPT_SENSE_BUFFER_ALLOC));
2423 memcpy(sc->sense_buffer, sense_data, MPT_SENSE_BUFFER_ALLOC);
2424
2425 /* Log SMART data (asc = 0x5D, non-IM case only) if required.
2426 */
2427 if ((ioc->events) && (ioc->eventTypes & (1 << MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE))) {
2428 if ((sense_data[12] == 0x5D) && (vdevice->vtarget->raidVolume == 0)) {
2429 int idx;
2430
2431 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
2432 ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE;
2433 ioc->events[idx].eventContext = ioc->eventContext;
2434
2435 ioc->events[idx].data[0] = (pReq->LUN[1] << 24) |
2436 (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) |
2437 (sc->device->channel << 8) | sc->device->id;
2438
2439 ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12];
2440
2441 ioc->eventContext++;
2442 if (ioc->pcidev->vendor ==
2443 PCI_VENDOR_ID_IBM) {
2444 mptscsih_issue_sep_command(ioc,
2445 vdevice->vtarget, MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
2446 vdevice->vtarget->tflags |=
2447 MPT_TARGET_FLAGS_LED_ON;
2448 }
2449 }
2450 }
2451 } else {
2452 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n",
2453 ioc->name));
2454 }
2455}
2456
2457/**
2458 * mptscsih_get_scsi_lookup - retrieves scmd entry
2459 * @ioc: Pointer to MPT_ADAPTER structure
2460 * @i: index into the array
2461 *
2462 * Returns the scsi_cmd pointer
2463 */
2464struct scsi_cmnd *
2465mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
2466{
2467 unsigned long flags;
2468 struct scsi_cmnd *scmd;
2469
2470 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2471 scmd = ioc->ScsiLookup[i];
2472 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2473
2474 return scmd;
2475}
2476EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
2477
2478/**
2479 * mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list
2480 * @ioc: Pointer to MPT_ADAPTER structure
2481 * @i: index into the array
2482 *
2483 * Returns the scsi_cmd pointer
2484 *
2485 **/
2486static struct scsi_cmnd *
2487mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
2488{
2489 unsigned long flags;
2490 struct scsi_cmnd *scmd;
2491
2492 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2493 scmd = ioc->ScsiLookup[i];
2494 ioc->ScsiLookup[i] = NULL;
2495 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2496
2497 return scmd;
2498}
2499
2500/**
2501 * mptscsih_set_scsi_lookup - write a scmd entry into the ScsiLookup[] array list
2502 *
2503 * @ioc: Pointer to MPT_ADAPTER structure
2504 * @i: index into the array
2505 * @scmd: scsi_cmnd pointer
2506 *
2507 **/
2508static void
2509mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd)
2510{
2511 unsigned long flags;
2512
2513 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2514 ioc->ScsiLookup[i] = scmd;
2515 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2516}
2517
2518/**
2519 * SCPNT_TO_LOOKUP_IDX - searches for a given scmd in the ScsiLookup[] array list
2520 * @ioc: Pointer to MPT_ADAPTER structure
2521 * @sc: scsi_cmnd pointer
2522 */
2523static int
2524SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *sc)
2525{
2526 unsigned long flags;
2527 int i, index=-1;
2528
2529 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
2530 for (i = 0; i < ioc->req_depth; i++) {
2531 if (ioc->ScsiLookup[i] == sc) {
2532 index = i;
2533 goto out;
2534 }
2535 }
2536
2537 out:
2538 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
2539 return index;
2540}
2541
2542/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2543int
2544mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
2545{
2546 MPT_SCSI_HOST *hd;
2547
2548 if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
2549 return 0;
2550
2551 hd = shost_priv(ioc->sh);
2552 switch (reset_phase) {
2553 case MPT_IOC_SETUP_RESET:
2554 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2555 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
2556 break;
2557 case MPT_IOC_PRE_RESET:
2558 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2559 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
2560 mptscsih_flush_running_cmds(hd);
2561 break;
2562 case MPT_IOC_POST_RESET:
2563 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2564 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
2565 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
2566 ioc->internal_cmds.status |=
2567 MPT_MGMT_STATUS_DID_IOCRESET;
2568 complete(&ioc->internal_cmds.done);
2569 }
2570 break;
2571 default:
2572 break;
2573 }
2574 return 1; /* currently means nothing really */
2575}
2576
2577/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2578int
2579mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
2580{
2581 u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
2582
2583 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2584 "MPT event (=%02Xh) routed to SCSI host driver!\n",
2585 ioc->name, event));
2586
2587 if ((event == MPI_EVENT_IOC_BUS_RESET ||
2588 event == MPI_EVENT_EXT_BUS_RESET) &&
2589 (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
2590 ioc->soft_resets++;
2591
2592 return 1; /* currently means nothing really */
2593}
2594
2595/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2596/*
2597 * Bus Scan and Domain Validation functionality ...
2598 */
2599
2600/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2601/*
2602 * mptscsih_scandv_complete - Scan and DV callback routine registered
2603 * to Fustion MPT (base) driver.
2604 *
2605 * @ioc: Pointer to MPT_ADAPTER structure
2606 * @mf: Pointer to original MPT request frame
2607 * @mr: Pointer to MPT reply frame (NULL if TurboReply)
2608 *
2609 * This routine is called from mpt.c::mpt_interrupt() at the completion
2610 * of any SCSI IO request.
2611 * This routine is registered with the Fusion MPT (base) driver at driver
2612 * load/init time via the mpt_register() API call.
2613 *
2614 * Returns 1 indicating alloc'd request frame ptr should be freed.
2615 *
2616 * Remark: Sets a completion code and (possibly) saves sense data
2617 * in the IOC member localReply structure.
2618 * Used ONLY for DV and other internal commands.
2619 */
2620int
2621mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2622 MPT_FRAME_HDR *reply)
2623{
2624 SCSIIORequest_t *pReq;
2625 SCSIIOReply_t *pReply;
2626 u8 cmd;
2627 u16 req_idx;
2628 u8 *sense_data;
2629 int sz;
2630
2631 ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
2632 ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
2633 if (!reply)
2634 goto out;
2635
2636 pReply = (SCSIIOReply_t *) reply;
2637 pReq = (SCSIIORequest_t *) req;
2638 ioc->internal_cmds.completion_code =
2639 mptscsih_get_completion_code(ioc, req, reply);
2640 ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
2641 memcpy(ioc->internal_cmds.reply, reply,
2642 min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
2643 cmd = reply->u.hdr.Function;
2644 if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
2645 (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
2646 (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
2647 req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
2648 sense_data = ((u8 *)ioc->sense_buf_pool +
2649 (req_idx * MPT_SENSE_BUFFER_ALLOC));
2650 sz = min_t(int, pReq->SenseBufferLength,
2651 MPT_SENSE_BUFFER_ALLOC);
2652 memcpy(ioc->internal_cmds.sense, sense_data, sz);
2653 }
2654 out:
2655 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
2656 return 0;
2657 ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
2658 complete(&ioc->internal_cmds.done);
2659 return 1;
2660}
2661
2662
2663/**
2664 * mptscsih_get_completion_code - get completion code from MPT request
2665 * @ioc: Pointer to MPT_ADAPTER structure
2666 * @req: Pointer to original MPT request frame
2667 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
2668 *
2669 **/
2670static int
2671mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
2672 MPT_FRAME_HDR *reply)
2673{
2674 SCSIIOReply_t *pReply;
2675 MpiRaidActionReply_t *pr;
2676 u8 scsi_status;
2677 u16 status;
2678 int completion_code;
2679
2680 pReply = (SCSIIOReply_t *)reply;
2681 status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
2682 scsi_status = pReply->SCSIStatus;
2683
2684 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2685 "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
2686 "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
2687 scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
2688
2689 switch (status) {
2690
2691 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
2692 completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
2693 break;
2694
2695 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
2696 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
2697 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
2698 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
2699 completion_code = MPT_SCANDV_DID_RESET;
2700 break;
2701
2702 case MPI_IOCSTATUS_BUSY:
2703 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
2704 completion_code = MPT_SCANDV_BUSY;
2705 break;
2706
2707 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
2708 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
2709 case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
2710 if (pReply->Function == MPI_FUNCTION_CONFIG) {
2711 completion_code = MPT_SCANDV_GOOD;
2712 } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
2713 pr = (MpiRaidActionReply_t *)reply;
2714 if (le16_to_cpu(pr->ActionStatus) ==
2715 MPI_RAID_ACTION_ASTATUS_SUCCESS)
2716 completion_code = MPT_SCANDV_GOOD;
2717 else
2718 completion_code = MPT_SCANDV_SOME_ERROR;
2719 } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
2720 completion_code = MPT_SCANDV_SENSE;
2721 else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
2722 if (req->u.scsireq.CDB[0] == INQUIRY)
2723 completion_code = MPT_SCANDV_ISSUE_SENSE;
2724 else
2725 completion_code = MPT_SCANDV_DID_RESET;
2726 } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
2727 completion_code = MPT_SCANDV_DID_RESET;
2728 else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2729 completion_code = MPT_SCANDV_DID_RESET;
2730 else if (scsi_status == MPI_SCSI_STATUS_BUSY)
2731 completion_code = MPT_SCANDV_BUSY;
2732 else
2733 completion_code = MPT_SCANDV_GOOD;
2734 break;
2735
2736 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
2737 if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
2738 completion_code = MPT_SCANDV_DID_RESET;
2739 else
2740 completion_code = MPT_SCANDV_SOME_ERROR;
2741 break;
2742 default:
2743 completion_code = MPT_SCANDV_SOME_ERROR;
2744 break;
2745
2746 } /* switch(status) */
2747
2748 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2749 " completionCode set to %08xh\n", ioc->name, completion_code));
2750 return completion_code;
2751}
2752
2753/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2754/**
2755 * mptscsih_do_cmd - Do internal command.
2756 * @hd: MPT_SCSI_HOST pointer
2757 * @io: INTERNAL_CMD pointer.
2758 *
2759 * Issue the specified internally generated command and do command
2760 * specific cleanup. For bus scan / DV only.
2761 * NOTES: If command is Inquiry and status is good,
2762 * initialize a target structure, save the data
2763 *
2764 * Remark: Single threaded access only.
2765 *
2766 * Return:
2767 * < 0 if an illegal command or no resources
2768 *
2769 * 0 if good
2770 *
2771 * > 0 if command complete but some type of completion error.
2772 */
2773static int
2774mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *io)
2775{
2776 MPT_FRAME_HDR *mf;
2777 SCSIIORequest_t *pScsiReq;
2778 int my_idx, ii, dir;
2779 int timeout;
2780 char cmdLen;
2781 char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
2782 u8 cmd = io->cmd;
2783 MPT_ADAPTER *ioc = hd->ioc;
2784 int ret = 0;
2785 unsigned long timeleft;
2786 unsigned long flags;
2787
2788 /* don't send internal command during diag reset */
2789 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2790 if (ioc->ioc_reset_in_progress) {
2791 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2792 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2793 "%s: busy with host reset\n", ioc->name, __func__));
2794 return MPT_SCANDV_BUSY;
2795 }
2796 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2797
2798 mutex_lock(&ioc->internal_cmds.mutex);
2799
2800 /* Set command specific information
2801 */
2802 switch (cmd) {
2803 case INQUIRY:
2804 cmdLen = 6;
2805 dir = MPI_SCSIIO_CONTROL_READ;
2806 CDB[0] = cmd;
2807 CDB[4] = io->size;
2808 timeout = 10;
2809 break;
2810
2811 case TEST_UNIT_READY:
2812 cmdLen = 6;
2813 dir = MPI_SCSIIO_CONTROL_READ;
2814 timeout = 10;
2815 break;
2816
2817 case START_STOP:
2818 cmdLen = 6;
2819 dir = MPI_SCSIIO_CONTROL_READ;
2820 CDB[0] = cmd;
2821 CDB[4] = 1; /*Spin up the disk */
2822 timeout = 15;
2823 break;
2824
2825 case REQUEST_SENSE:
2826 cmdLen = 6;
2827 CDB[0] = cmd;
2828 CDB[4] = io->size;
2829 dir = MPI_SCSIIO_CONTROL_READ;
2830 timeout = 10;
2831 break;
2832
2833 case READ_BUFFER:
2834 cmdLen = 10;
2835 dir = MPI_SCSIIO_CONTROL_READ;
2836 CDB[0] = cmd;
2837 if (io->flags & MPT_ICFLAG_ECHO) {
2838 CDB[1] = 0x0A;
2839 } else {
2840 CDB[1] = 0x02;
2841 }
2842
2843 if (io->flags & MPT_ICFLAG_BUF_CAP) {
2844 CDB[1] |= 0x01;
2845 }
2846 CDB[6] = (io->size >> 16) & 0xFF;
2847 CDB[7] = (io->size >> 8) & 0xFF;
2848 CDB[8] = io->size & 0xFF;
2849 timeout = 10;
2850 break;
2851
2852 case WRITE_BUFFER:
2853 cmdLen = 10;
2854 dir = MPI_SCSIIO_CONTROL_WRITE;
2855 CDB[0] = cmd;
2856 if (io->flags & MPT_ICFLAG_ECHO) {
2857 CDB[1] = 0x0A;
2858 } else {
2859 CDB[1] = 0x02;
2860 }
2861 CDB[6] = (io->size >> 16) & 0xFF;
2862 CDB[7] = (io->size >> 8) & 0xFF;
2863 CDB[8] = io->size & 0xFF;
2864 timeout = 10;
2865 break;
2866
2867 case RESERVE:
2868 cmdLen = 6;
2869 dir = MPI_SCSIIO_CONTROL_READ;
2870 CDB[0] = cmd;
2871 timeout = 10;
2872 break;
2873
2874 case RELEASE:
2875 cmdLen = 6;
2876 dir = MPI_SCSIIO_CONTROL_READ;
2877 CDB[0] = cmd;
2878 timeout = 10;
2879 break;
2880
2881 case SYNCHRONIZE_CACHE:
2882 cmdLen = 10;
2883 dir = MPI_SCSIIO_CONTROL_READ;
2884 CDB[0] = cmd;
2885// CDB[1] = 0x02; /* set immediate bit */
2886 timeout = 10;
2887 break;
2888
2889 default:
2890 /* Error Case */
2891 ret = -EFAULT;
2892 goto out;
2893 }
2894
2895 /* Get and Populate a free Frame
2896 * MsgContext set in mpt_get_msg_frame call
2897 */
2898 if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
2899 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
2900 ioc->name, __func__));
2901 ret = MPT_SCANDV_BUSY;
2902 goto out;
2903 }
2904
2905 pScsiReq = (SCSIIORequest_t *) mf;
2906
2907 /* Get the request index */
2908 my_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
2909 ADD_INDEX_LOG(my_idx); /* for debug */
2910
2911 if (io->flags & MPT_ICFLAG_PHYS_DISK) {
2912 pScsiReq->TargetID = io->physDiskNum;
2913 pScsiReq->Bus = 0;
2914 pScsiReq->ChainOffset = 0;
2915 pScsiReq->Function = MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
2916 } else {
2917 pScsiReq->TargetID = io->id;
2918 pScsiReq->Bus = io->channel;
2919 pScsiReq->ChainOffset = 0;
2920 pScsiReq->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
2921 }
2922
2923 pScsiReq->CDBLength = cmdLen;
2924 pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
2925
2926 pScsiReq->Reserved = 0;
2927
2928 pScsiReq->MsgFlags = mpt_msg_flags(ioc);
2929 /* MsgContext set in mpt_get_msg_fram call */
2930
2931 int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
2932
2933 if (io->flags & MPT_ICFLAG_TAGGED_CMD)
2934 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_SIMPLEQ);
2935 else
2936 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2937
2938 if (cmd == REQUEST_SENSE) {
2939 pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
2940 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2941 "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
2942 }
2943
2944 for (ii = 0; ii < 16; ii++)
2945 pScsiReq->CDB[ii] = CDB[ii];
2946
2947 pScsiReq->DataLength = cpu_to_le32(io->size);
2948 pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
2949 + (my_idx * MPT_SENSE_BUFFER_ALLOC));
2950
2951 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2952 "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%llu\n",
2953 ioc->name, __func__, cmd, io->channel, io->id, io->lun));
2954
2955 if (dir == MPI_SCSIIO_CONTROL_READ)
2956 ioc->add_sge((char *) &pScsiReq->SGL,
2957 MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
2958 else
2959 ioc->add_sge((char *) &pScsiReq->SGL,
2960 MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
2961
2962 INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
2963 mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
2964 timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
2965 timeout*HZ);
2966 if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
2967 ret = MPT_SCANDV_DID_RESET;
2968 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2969 "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
2970 cmd));
2971 if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
2972 mpt_free_msg_frame(ioc, mf);
2973 goto out;
2974 }
2975 if (!timeleft) {
2976 printk(MYIOC_s_WARN_FMT
2977 "Issuing Reset from %s!! doorbell=0x%08xh"
2978 " cmd=0x%02x\n",
2979 ioc->name, __func__, mpt_GetIocState(ioc, 0),
2980 cmd);
2981 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
2982 mpt_free_msg_frame(ioc, mf);
2983 }
2984 goto out;
2985 }
2986
2987 ret = ioc->internal_cmds.completion_code;
2988 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
2989 ioc->name, __func__, ret));
2990
2991 out:
2992 CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
2993 mutex_unlock(&ioc->internal_cmds.mutex);
2994 return ret;
2995}
2996
2997/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2998/**
2999 * mptscsih_synchronize_cache - Send SYNCHRONIZE_CACHE to all disks.
3000 * @hd: Pointer to a SCSI HOST structure
3001 * @vdevice: virtual target device
3002 *
3003 * Uses the ISR, but with special processing.
3004 * MUST be single-threaded.
3005 *
3006 */
3007static void
3008mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
3009{
3010 INTERNAL_CMD iocmd;
3011
3012 /* Ignore hidden raid components, this is handled when the command
3013 * is sent to the volume
3014 */
3015 if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
3016 return;
3017
3018 if (vdevice->vtarget->type != TYPE_DISK || vdevice->vtarget->deleted ||
3019 !vdevice->configured_lun)
3020 return;
3021
3022 /* Following parameters will not change
3023 * in this routine.
3024 */
3025 iocmd.cmd = SYNCHRONIZE_CACHE;
3026 iocmd.flags = 0;
3027 iocmd.physDiskNum = -1;
3028 iocmd.data = NULL;
3029 iocmd.data_dma = -1;
3030 iocmd.size = 0;
3031 iocmd.rsvd = iocmd.rsvd2 = 0;
3032 iocmd.channel = vdevice->vtarget->channel;
3033 iocmd.id = vdevice->vtarget->id;
3034 iocmd.lun = vdevice->lun;
3035
3036 mptscsih_do_cmd(hd, &iocmd);
3037}
3038
3039static ssize_t
3040mptscsih_version_fw_show(struct device *dev, struct device_attribute *attr,
3041 char *buf)
3042{
3043 struct Scsi_Host *host = class_to_shost(dev);
3044 MPT_SCSI_HOST *hd = shost_priv(host);
3045 MPT_ADAPTER *ioc = hd->ioc;
3046
3047 return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
3048 (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
3049 (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
3050 (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
3051 ioc->facts.FWVersion.Word & 0x000000FF);
3052}
3053static DEVICE_ATTR(version_fw, S_IRUGO, mptscsih_version_fw_show, NULL);
3054
3055static ssize_t
3056mptscsih_version_bios_show(struct device *dev, struct device_attribute *attr,
3057 char *buf)
3058{
3059 struct Scsi_Host *host = class_to_shost(dev);
3060 MPT_SCSI_HOST *hd = shost_priv(host);
3061 MPT_ADAPTER *ioc = hd->ioc;
3062
3063 return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
3064 (ioc->biosVersion & 0xFF000000) >> 24,
3065 (ioc->biosVersion & 0x00FF0000) >> 16,
3066 (ioc->biosVersion & 0x0000FF00) >> 8,
3067 ioc->biosVersion & 0x000000FF);
3068}
3069static DEVICE_ATTR(version_bios, S_IRUGO, mptscsih_version_bios_show, NULL);
3070
3071static ssize_t
3072mptscsih_version_mpi_show(struct device *dev, struct device_attribute *attr,
3073 char *buf)
3074{
3075 struct Scsi_Host *host = class_to_shost(dev);
3076 MPT_SCSI_HOST *hd = shost_priv(host);
3077 MPT_ADAPTER *ioc = hd->ioc;
3078
3079 return snprintf(buf, PAGE_SIZE, "%03x\n", ioc->facts.MsgVersion);
3080}
3081static DEVICE_ATTR(version_mpi, S_IRUGO, mptscsih_version_mpi_show, NULL);
3082
3083static ssize_t
3084mptscsih_version_product_show(struct device *dev,
3085 struct device_attribute *attr,
3086char *buf)
3087{
3088 struct Scsi_Host *host = class_to_shost(dev);
3089 MPT_SCSI_HOST *hd = shost_priv(host);
3090 MPT_ADAPTER *ioc = hd->ioc;
3091
3092 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->prod_name);
3093}
3094static DEVICE_ATTR(version_product, S_IRUGO,
3095 mptscsih_version_product_show, NULL);
3096
3097static ssize_t
3098mptscsih_version_nvdata_persistent_show(struct device *dev,
3099 struct device_attribute *attr,
3100 char *buf)
3101{
3102 struct Scsi_Host *host = class_to_shost(dev);
3103 MPT_SCSI_HOST *hd = shost_priv(host);
3104 MPT_ADAPTER *ioc = hd->ioc;
3105
3106 return snprintf(buf, PAGE_SIZE, "%02xh\n",
3107 ioc->nvdata_version_persistent);
3108}
3109static DEVICE_ATTR(version_nvdata_persistent, S_IRUGO,
3110 mptscsih_version_nvdata_persistent_show, NULL);
3111
3112static ssize_t
3113mptscsih_version_nvdata_default_show(struct device *dev,
3114 struct device_attribute *attr, char *buf)
3115{
3116 struct Scsi_Host *host = class_to_shost(dev);
3117 MPT_SCSI_HOST *hd = shost_priv(host);
3118 MPT_ADAPTER *ioc = hd->ioc;
3119
3120 return snprintf(buf, PAGE_SIZE, "%02xh\n",ioc->nvdata_version_default);
3121}
3122static DEVICE_ATTR(version_nvdata_default, S_IRUGO,
3123 mptscsih_version_nvdata_default_show, NULL);
3124
3125static ssize_t
3126mptscsih_board_name_show(struct device *dev, struct device_attribute *attr,
3127 char *buf)
3128{
3129 struct Scsi_Host *host = class_to_shost(dev);
3130 MPT_SCSI_HOST *hd = shost_priv(host);
3131 MPT_ADAPTER *ioc = hd->ioc;
3132
3133 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_name);
3134}
3135static DEVICE_ATTR(board_name, S_IRUGO, mptscsih_board_name_show, NULL);
3136
3137static ssize_t
3138mptscsih_board_assembly_show(struct device *dev,
3139 struct device_attribute *attr, char *buf)
3140{
3141 struct Scsi_Host *host = class_to_shost(dev);
3142 MPT_SCSI_HOST *hd = shost_priv(host);
3143 MPT_ADAPTER *ioc = hd->ioc;
3144
3145 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_assembly);
3146}
3147static DEVICE_ATTR(board_assembly, S_IRUGO,
3148 mptscsih_board_assembly_show, NULL);
3149
3150static ssize_t
3151mptscsih_board_tracer_show(struct device *dev, struct device_attribute *attr,
3152 char *buf)
3153{
3154 struct Scsi_Host *host = class_to_shost(dev);
3155 MPT_SCSI_HOST *hd = shost_priv(host);
3156 MPT_ADAPTER *ioc = hd->ioc;
3157
3158 return snprintf(buf, PAGE_SIZE, "%s\n", ioc->board_tracer);
3159}
3160static DEVICE_ATTR(board_tracer, S_IRUGO,
3161 mptscsih_board_tracer_show, NULL);
3162
3163static ssize_t
3164mptscsih_io_delay_show(struct device *dev, struct device_attribute *attr,
3165 char *buf)
3166{
3167 struct Scsi_Host *host = class_to_shost(dev);
3168 MPT_SCSI_HOST *hd = shost_priv(host);
3169 MPT_ADAPTER *ioc = hd->ioc;
3170
3171 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
3172}
3173static DEVICE_ATTR(io_delay, S_IRUGO,
3174 mptscsih_io_delay_show, NULL);
3175
3176static ssize_t
3177mptscsih_device_delay_show(struct device *dev, struct device_attribute *attr,
3178 char *buf)
3179{
3180 struct Scsi_Host *host = class_to_shost(dev);
3181 MPT_SCSI_HOST *hd = shost_priv(host);
3182 MPT_ADAPTER *ioc = hd->ioc;
3183
3184 return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
3185}
3186static DEVICE_ATTR(device_delay, S_IRUGO,
3187 mptscsih_device_delay_show, NULL);
3188
3189static ssize_t
3190mptscsih_debug_level_show(struct device *dev, struct device_attribute *attr,
3191 char *buf)
3192{
3193 struct Scsi_Host *host = class_to_shost(dev);
3194 MPT_SCSI_HOST *hd = shost_priv(host);
3195 MPT_ADAPTER *ioc = hd->ioc;
3196
3197 return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->debug_level);
3198}
3199static ssize_t
3200mptscsih_debug_level_store(struct device *dev, struct device_attribute *attr,
3201 const char *buf, size_t count)
3202{
3203 struct Scsi_Host *host = class_to_shost(dev);
3204 MPT_SCSI_HOST *hd = shost_priv(host);
3205 MPT_ADAPTER *ioc = hd->ioc;
3206 int val = 0;
3207
3208 if (sscanf(buf, "%x", &val) != 1)
3209 return -EINVAL;
3210
3211 ioc->debug_level = val;
3212 printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",
3213 ioc->name, ioc->debug_level);
3214 return strlen(buf);
3215}
3216static DEVICE_ATTR(debug_level, S_IRUGO | S_IWUSR,
3217 mptscsih_debug_level_show, mptscsih_debug_level_store);
3218
3219struct device_attribute *mptscsih_host_attrs[] = {
3220 &dev_attr_version_fw,
3221 &dev_attr_version_bios,
3222 &dev_attr_version_mpi,
3223 &dev_attr_version_product,
3224 &dev_attr_version_nvdata_persistent,
3225 &dev_attr_version_nvdata_default,
3226 &dev_attr_board_name,
3227 &dev_attr_board_assembly,
3228 &dev_attr_board_tracer,
3229 &dev_attr_io_delay,
3230 &dev_attr_device_delay,
3231 &dev_attr_debug_level,
3232 NULL,
3233};
3234
3235EXPORT_SYMBOL(mptscsih_host_attrs);
3236
3237EXPORT_SYMBOL(mptscsih_remove);
3238EXPORT_SYMBOL(mptscsih_shutdown);
3239#ifdef CONFIG_PM
3240EXPORT_SYMBOL(mptscsih_suspend);
3241EXPORT_SYMBOL(mptscsih_resume);
3242#endif
3243EXPORT_SYMBOL(mptscsih_show_info);
3244EXPORT_SYMBOL(mptscsih_info);
3245EXPORT_SYMBOL(mptscsih_qcmd);
3246EXPORT_SYMBOL(mptscsih_slave_destroy);
3247EXPORT_SYMBOL(mptscsih_slave_configure);
3248EXPORT_SYMBOL(mptscsih_abort);
3249EXPORT_SYMBOL(mptscsih_dev_reset);
3250EXPORT_SYMBOL(mptscsih_bus_reset);
3251EXPORT_SYMBOL(mptscsih_host_reset);
3252EXPORT_SYMBOL(mptscsih_bios_param);
3253EXPORT_SYMBOL(mptscsih_io_done);
3254EXPORT_SYMBOL(mptscsih_taskmgmt_complete);
3255EXPORT_SYMBOL(mptscsih_scandv_complete);
3256EXPORT_SYMBOL(mptscsih_event_process);
3257EXPORT_SYMBOL(mptscsih_ioc_reset);
3258EXPORT_SYMBOL(mptscsih_change_queue_depth);
3259
3260/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/