Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6282.dtsi"
6
7/ {
8 model = "Plat'Home OpenBlocksA6";
9 compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x20000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 };
20
21 ocp@f1000000 {
22 serial@12000 {
23 status = "okay";
24 };
25
26 serial@12100 {
27 status = "okay";
28 };
29
30 sata@80000 {
31 nr-ports = <1>;
32 status = "okay";
33 };
34
35 i2c@11100 {
36 status = "okay";
37
38 s35390a: s35390a@30 {
39 compatible = "sii,s35390a";
40 reg = <0x30>;
41 };
42 };
43
44 pinctrl: pin-controller@10000 {
45 pinctrl-0 = <&pmx_dip_switches>;
46 pinctrl-names = "default";
47
48 pmx_uart0: pmx-uart0 {
49 marvell,pins = "mpp10", "mpp11", "mpp15",
50 "mpp16";
51 marvell,function = "uart0";
52 };
53
54 pmx_uart1: pmx-uart1 {
55 marvell,pins = "mpp13", "mpp14", "mpp8",
56 "mpp9";
57 marvell,function = "uart1";
58 };
59
60 pmx_sysrst: pmx-sysrst {
61 marvell,pins = "mpp6";
62 marvell,function = "sysrst";
63 };
64
65 pmx_dip_switches: pmx-dip-switches {
66 marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
67 marvell,function = "gpio";
68 };
69
70 pmx_gpio_header: pmx-gpio-header {
71 marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
72 "mpp28", "mpp29", "mpp30", "mpp31";
73 marvell,function = "gpio";
74 };
75
76 pmx_gpio_init: pmx-init {
77 marvell,pins = "mpp38";
78 marvell,function = "gpio";
79 };
80
81 pmx_usb_oc: pmx-usb-oc {
82 marvell,pins = "mpp39";
83 marvell,function = "gpio";
84 };
85
86 pmx_leds: pmx-leds {
87 marvell,pins = "mpp41", "mpp42", "mpp43";
88 marvell,function = "gpio";
89 };
90 };
91 };
92
93 gpio-leds {
94 compatible = "gpio-leds";
95 pinctrl-0 = <&pmx_leds>;
96 pinctrl-names = "default";
97
98 led-red {
99 label = "obsa6:red:stat";
100 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
101 };
102
103 led-green {
104 label = "obsa6:green:stat";
105 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
106 };
107
108 led-yellow {
109 label = "obsa6:yellow:stat";
110 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
111 };
112 };
113
114 gpio_keys {
115 compatible = "gpio-keys";
116 pinctrl-0 = <&pmx_gpio_init>;
117 pinctrl-names = "default";
118 #address-cells = <1>;
119 #size-cells = <0>;
120
121 power {
122 label = "Init Button";
123 linux,code = <KEY_POWER>;
124 gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
125 };
126 };
127};
128
129&nand {
130 chip-delay = <25>;
131 status = "okay";
132
133 partition@0 {
134 label = "uboot";
135 reg = <0x0 0x90000>;
136 };
137
138 partition@90000 {
139 label = "env";
140 reg = <0x90000 0x44000>;
141 };
142
143 partition@d4000 {
144 label = "test";
145 reg = <0xd4000 0x20000>;
146 };
147
148 partition@f4000 {
149 label = "conf";
150 reg = <0xf4000 0x400000>;
151 };
152
153 partition@4f4000 {
154 label = "linux";
155 reg = <0x4f4000 0x1d20000>;
156 };
157
158 partition@2214000 {
159 label = "user";
160 reg = <0x2214000 0x1dec000>;
161 };
162};
163
164&mdio {
165 status = "okay";
166
167 ethphy0: ethernet-phy@0 {
168 reg = <0>;
169 };
170};
171
172ð0 {
173 status = "okay";
174 ethernet0-port@0 {
175 phy-handle = <ðphy0>;
176 };
177};
178
179&gpio0 {
180 status = "okay";
181
182 pinctrl-0 = <&pmx_gpio_header>;
183 pinctrl-names = "default";
184};
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6282.dtsi"
6
7/ {
8 model = "Plat'Home OpenBlocksA6";
9 compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
10
11 memory {
12 device_type = "memory";
13 reg = <0x00000000 0x20000000>;
14 };
15
16 chosen {
17 bootargs = "console=ttyS0,115200n8 earlyprintk";
18 stdout-path = &uart0;
19 };
20
21 ocp@f1000000 {
22 serial@12000 {
23 status = "okay";
24 };
25
26 serial@12100 {
27 status = "okay";
28 };
29
30 sata@80000 {
31 nr-ports = <1>;
32 status = "okay";
33 };
34
35 i2c@11100 {
36 status = "okay";
37
38 s35390a: s35390a@30 {
39 compatible = "sii,s35390a";
40 reg = <0x30>;
41 };
42 };
43
44 pinctrl: pin-controller@10000 {
45 pinctrl-0 = <&pmx_dip_switches>;
46 pinctrl-names = "default";
47
48 pmx_uart0: pmx-uart0 {
49 marvell,pins = "mpp10", "mpp11", "mpp15",
50 "mpp16";
51 marvell,function = "uart0";
52 };
53
54 pmx_uart1: pmx-uart1 {
55 marvell,pins = "mpp13", "mpp14", "mpp8",
56 "mpp9";
57 marvell,function = "uart1";
58 };
59
60 pmx_sysrst: pmx-sysrst {
61 marvell,pins = "mpp6";
62 marvell,function = "sysrst";
63 };
64
65 pmx_dip_switches: pmx-dip-switches {
66 marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
67 marvell,function = "gpio";
68 };
69
70 pmx_gpio_header: pmx-gpio-header {
71 marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
72 "mpp28", "mpp29", "mpp30", "mpp31";
73 marvell,function = "gpio";
74 };
75
76 pmx_gpio_init: pmx-init {
77 marvell,pins = "mpp38";
78 marvell,function = "gpio";
79 };
80
81 pmx_usb_oc: pmx-usb-oc {
82 marvell,pins = "mpp39";
83 marvell,function = "gpio";
84 };
85
86 pmx_leds: pmx-leds {
87 marvell,pins = "mpp41", "mpp42", "mpp43";
88 marvell,function = "gpio";
89 };
90 };
91 };
92
93 gpio-leds {
94 compatible = "gpio-leds";
95 pinctrl-0 = <&pmx_leds>;
96 pinctrl-names = "default";
97
98 led-red {
99 label = "obsa6:red:stat";
100 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
101 };
102
103 led-green {
104 label = "obsa6:green:stat";
105 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
106 };
107
108 led-yellow {
109 label = "obsa6:yellow:stat";
110 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
111 };
112 };
113
114 gpio_keys {
115 compatible = "gpio-keys";
116 pinctrl-0 = <&pmx_gpio_init>;
117 pinctrl-names = "default";
118 #address-cells = <1>;
119 #size-cells = <0>;
120
121 power {
122 label = "Init Button";
123 linux,code = <KEY_POWER>;
124 gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
125 };
126 };
127};
128
129&nand {
130 chip-delay = <25>;
131 status = "okay";
132
133 partition@0 {
134 label = "uboot";
135 reg = <0x0 0x90000>;
136 };
137
138 partition@90000 {
139 label = "env";
140 reg = <0x90000 0x44000>;
141 };
142
143 partition@d4000 {
144 label = "test";
145 reg = <0xd4000 0x20000>;
146 };
147
148 partition@f4000 {
149 label = "conf";
150 reg = <0xf4000 0x400000>;
151 };
152
153 partition@4f4000 {
154 label = "linux";
155 reg = <0x4f4000 0x1d20000>;
156 };
157
158 partition@2214000 {
159 label = "user";
160 reg = <0x2214000 0x1dec000>;
161 };
162};
163
164&mdio {
165 status = "okay";
166
167 ethphy0: ethernet-phy@0 {
168 reg = <0>;
169 };
170};
171
172ð0 {
173 status = "okay";
174 ethernet0-port@0 {
175 phy-handle = <ðphy0>;
176 };
177};
178
179&gpio0 {
180 status = "okay";
181
182 pinctrl-0 = <&pmx_gpio_header>;
183 pinctrl-names = "default";
184};