Loading...
1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2012 Freescale Semiconductor, Inc.
4
5#include <dt-bindings/gpio/gpio.h>
6#include "imx28-pinfunc.h"
7
8/ {
9 #address-cells = <1>;
10 #size-cells = <1>;
11
12 interrupt-parent = <&icoll>;
13 /*
14 * The decompressor and also some bootloaders rely on a
15 * pre-existing /chosen node to be available to insert the
16 * command line and merge other ATAGS info.
17 */
18 chosen {};
19
20 aliases {
21 ethernet0 = &mac0;
22 ethernet1 = &mac1;
23 gpio0 = &gpio0;
24 gpio1 = &gpio1;
25 gpio2 = &gpio2;
26 gpio3 = &gpio3;
27 gpio4 = &gpio4;
28 saif0 = &saif0;
29 saif1 = &saif1;
30 serial0 = &auart0;
31 serial1 = &auart1;
32 serial2 = &auart2;
33 serial3 = &auart3;
34 serial4 = &auart4;
35 spi0 = &ssp1;
36 spi1 = &ssp2;
37 usbphy0 = &usbphy0;
38 usbphy1 = &usbphy1;
39 };
40
41 cpus {
42 #address-cells = <1>;
43 #size-cells = <0>;
44
45 cpu@0 {
46 compatible = "arm,arm926ej-s";
47 device_type = "cpu";
48 reg = <0>;
49 };
50 };
51
52 apb@80000000 {
53 compatible = "simple-bus";
54 #address-cells = <1>;
55 #size-cells = <1>;
56 reg = <0x80000000 0x80000>;
57 ranges;
58
59 apbh@80000000 {
60 compatible = "simple-bus";
61 #address-cells = <1>;
62 #size-cells = <1>;
63 reg = <0x80000000 0x3c900>;
64 ranges;
65
66 icoll: interrupt-controller@80000000 {
67 compatible = "fsl,imx28-icoll", "fsl,icoll";
68 interrupt-controller;
69 #interrupt-cells = <1>;
70 reg = <0x80000000 0x2000>;
71 };
72
73 hsadc: hsadc@80002000 {
74 reg = <0x80002000 0x2000>;
75 interrupts = <13>;
76 dmas = <&dma_apbh 12>;
77 dma-names = "rx";
78 status = "disabled";
79 };
80
81 dma_apbh: dma-apbh@80004000 {
82 compatible = "fsl,imx28-dma-apbh";
83 reg = <0x80004000 0x2000>;
84 interrupts = <82 83 84 85
85 88 88 88 88
86 88 88 88 88
87 87 86 0 0>;
88 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
89 "gpmi0", "gmpi1", "gpmi2", "gmpi3",
90 "gpmi4", "gmpi5", "gpmi6", "gmpi7",
91 "hsadc", "lcdif", "empty", "empty";
92 #dma-cells = <1>;
93 dma-channels = <16>;
94 clocks = <&clks 25>;
95 };
96
97 perfmon: perfmon@80006000 {
98 reg = <0x80006000 0x800>;
99 interrupts = <27>;
100 status = "disabled";
101 };
102
103 gpmi: nand-controller@8000c000 {
104 compatible = "fsl,imx28-gpmi-nand";
105 #address-cells = <1>;
106 #size-cells = <1>;
107 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
108 reg-names = "gpmi-nand", "bch";
109 interrupts = <41>;
110 interrupt-names = "bch";
111 clocks = <&clks 50>;
112 clock-names = "gpmi_io";
113 assigned-clocks = <&clks 13>;
114 assigned-clock-parents = <&clks 10>;
115 dmas = <&dma_apbh 4>;
116 dma-names = "rx-tx";
117 status = "disabled";
118 };
119
120 ssp0: spi@80010000 {
121 #address-cells = <1>;
122 #size-cells = <0>;
123 reg = <0x80010000 0x2000>;
124 interrupts = <96>;
125 clocks = <&clks 46>;
126 dmas = <&dma_apbh 0>;
127 dma-names = "rx-tx";
128 status = "disabled";
129 };
130
131 ssp1: spi@80012000 {
132 #address-cells = <1>;
133 #size-cells = <0>;
134 reg = <0x80012000 0x2000>;
135 interrupts = <97>;
136 clocks = <&clks 47>;
137 dmas = <&dma_apbh 1>;
138 dma-names = "rx-tx";
139 status = "disabled";
140 };
141
142 ssp2: spi@80014000 {
143 #address-cells = <1>;
144 #size-cells = <0>;
145 reg = <0x80014000 0x2000>;
146 interrupts = <98>;
147 clocks = <&clks 48>;
148 dmas = <&dma_apbh 2>;
149 dma-names = "rx-tx";
150 status = "disabled";
151 };
152
153 ssp3: spi@80016000 {
154 #address-cells = <1>;
155 #size-cells = <0>;
156 reg = <0x80016000 0x2000>;
157 interrupts = <99>;
158 clocks = <&clks 49>;
159 dmas = <&dma_apbh 3>;
160 dma-names = "rx-tx";
161 status = "disabled";
162 };
163
164 pinctrl: pinctrl@80018000 {
165 #address-cells = <1>;
166 #size-cells = <0>;
167 compatible = "fsl,imx28-pinctrl", "simple-bus";
168 reg = <0x80018000 0x2000>;
169
170 gpio0: gpio@0 {
171 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
172 reg = <0>;
173 interrupts = <127>;
174 gpio-controller;
175 #gpio-cells = <2>;
176 interrupt-controller;
177 #interrupt-cells = <2>;
178 };
179
180 gpio1: gpio@1 {
181 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
182 reg = <1>;
183 interrupts = <126>;
184 gpio-controller;
185 #gpio-cells = <2>;
186 interrupt-controller;
187 #interrupt-cells = <2>;
188 };
189
190 gpio2: gpio@2 {
191 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
192 reg = <2>;
193 interrupts = <125>;
194 gpio-controller;
195 #gpio-cells = <2>;
196 interrupt-controller;
197 #interrupt-cells = <2>;
198 };
199
200 gpio3: gpio@3 {
201 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
202 reg = <3>;
203 interrupts = <124>;
204 gpio-controller;
205 #gpio-cells = <2>;
206 interrupt-controller;
207 #interrupt-cells = <2>;
208 };
209
210 gpio4: gpio@4 {
211 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
212 reg = <4>;
213 interrupts = <123>;
214 gpio-controller;
215 #gpio-cells = <2>;
216 interrupt-controller;
217 #interrupt-cells = <2>;
218 };
219
220 duart_pins_a: duart@0 {
221 reg = <0>;
222 fsl,pinmux-ids = <
223 MX28_PAD_PWM0__DUART_RX
224 MX28_PAD_PWM1__DUART_TX
225 >;
226 fsl,drive-strength = <MXS_DRIVE_4mA>;
227 fsl,voltage = <MXS_VOLTAGE_HIGH>;
228 fsl,pull-up = <MXS_PULL_DISABLE>;
229 };
230
231 duart_pins_b: duart@1 {
232 reg = <1>;
233 fsl,pinmux-ids = <
234 MX28_PAD_AUART0_CTS__DUART_RX
235 MX28_PAD_AUART0_RTS__DUART_TX
236 >;
237 fsl,drive-strength = <MXS_DRIVE_4mA>;
238 fsl,voltage = <MXS_VOLTAGE_HIGH>;
239 fsl,pull-up = <MXS_PULL_DISABLE>;
240 };
241
242 duart_4pins_a: duart-4pins@0 {
243 reg = <0>;
244 fsl,pinmux-ids = <
245 MX28_PAD_AUART0_CTS__DUART_RX
246 MX28_PAD_AUART0_RTS__DUART_TX
247 MX28_PAD_AUART0_RX__DUART_CTS
248 MX28_PAD_AUART0_TX__DUART_RTS
249 >;
250 fsl,drive-strength = <MXS_DRIVE_4mA>;
251 fsl,voltage = <MXS_VOLTAGE_HIGH>;
252 fsl,pull-up = <MXS_PULL_DISABLE>;
253 };
254
255 gpmi_pins_a: gpmi-nand@0 {
256 reg = <0>;
257 fsl,pinmux-ids = <
258 MX28_PAD_GPMI_D00__GPMI_D0
259 MX28_PAD_GPMI_D01__GPMI_D1
260 MX28_PAD_GPMI_D02__GPMI_D2
261 MX28_PAD_GPMI_D03__GPMI_D3
262 MX28_PAD_GPMI_D04__GPMI_D4
263 MX28_PAD_GPMI_D05__GPMI_D5
264 MX28_PAD_GPMI_D06__GPMI_D6
265 MX28_PAD_GPMI_D07__GPMI_D7
266 MX28_PAD_GPMI_CE0N__GPMI_CE0N
267 MX28_PAD_GPMI_RDY0__GPMI_READY0
268 MX28_PAD_GPMI_RDN__GPMI_RDN
269 MX28_PAD_GPMI_WRN__GPMI_WRN
270 MX28_PAD_GPMI_ALE__GPMI_ALE
271 MX28_PAD_GPMI_CLE__GPMI_CLE
272 MX28_PAD_GPMI_RESETN__GPMI_RESETN
273 >;
274 fsl,drive-strength = <MXS_DRIVE_4mA>;
275 fsl,voltage = <MXS_VOLTAGE_HIGH>;
276 fsl,pull-up = <MXS_PULL_DISABLE>;
277 };
278
279 gpmi_status_cfg: gpmi-status-cfg@0 {
280 reg = <0>;
281 fsl,pinmux-ids = <
282 MX28_PAD_GPMI_RDN__GPMI_RDN
283 MX28_PAD_GPMI_WRN__GPMI_WRN
284 MX28_PAD_GPMI_RESETN__GPMI_RESETN
285 >;
286 fsl,drive-strength = <MXS_DRIVE_12mA>;
287 };
288
289 auart0_pins_a: auart0@0 {
290 reg = <0>;
291 fsl,pinmux-ids = <
292 MX28_PAD_AUART0_RX__AUART0_RX
293 MX28_PAD_AUART0_TX__AUART0_TX
294 MX28_PAD_AUART0_CTS__AUART0_CTS
295 MX28_PAD_AUART0_RTS__AUART0_RTS
296 >;
297 fsl,drive-strength = <MXS_DRIVE_4mA>;
298 fsl,voltage = <MXS_VOLTAGE_HIGH>;
299 fsl,pull-up = <MXS_PULL_DISABLE>;
300 };
301
302 auart0_2pins_a: auart0-2pins@0 {
303 reg = <0>;
304 fsl,pinmux-ids = <
305 MX28_PAD_AUART0_RX__AUART0_RX
306 MX28_PAD_AUART0_TX__AUART0_TX
307 >;
308 fsl,drive-strength = <MXS_DRIVE_4mA>;
309 fsl,voltage = <MXS_VOLTAGE_HIGH>;
310 fsl,pull-up = <MXS_PULL_DISABLE>;
311 };
312
313 auart1_pins_a: auart1@0 {
314 reg = <0>;
315 fsl,pinmux-ids = <
316 MX28_PAD_AUART1_RX__AUART1_RX
317 MX28_PAD_AUART1_TX__AUART1_TX
318 MX28_PAD_AUART1_CTS__AUART1_CTS
319 MX28_PAD_AUART1_RTS__AUART1_RTS
320 >;
321 fsl,drive-strength = <MXS_DRIVE_4mA>;
322 fsl,voltage = <MXS_VOLTAGE_HIGH>;
323 fsl,pull-up = <MXS_PULL_DISABLE>;
324 };
325
326 auart1_2pins_a: auart1-2pins@0 {
327 reg = <0>;
328 fsl,pinmux-ids = <
329 MX28_PAD_AUART1_RX__AUART1_RX
330 MX28_PAD_AUART1_TX__AUART1_TX
331 >;
332 fsl,drive-strength = <MXS_DRIVE_4mA>;
333 fsl,voltage = <MXS_VOLTAGE_HIGH>;
334 fsl,pull-up = <MXS_PULL_DISABLE>;
335 };
336
337 auart2_2pins_a: auart2-2pins@0 {
338 reg = <0>;
339 fsl,pinmux-ids = <
340 MX28_PAD_SSP2_SCK__AUART2_RX
341 MX28_PAD_SSP2_MOSI__AUART2_TX
342 >;
343 fsl,drive-strength = <MXS_DRIVE_4mA>;
344 fsl,voltage = <MXS_VOLTAGE_HIGH>;
345 fsl,pull-up = <MXS_PULL_DISABLE>;
346 };
347
348 auart2_2pins_b: auart2-2pins@1 {
349 reg = <1>;
350 fsl,pinmux-ids = <
351 MX28_PAD_AUART2_RX__AUART2_RX
352 MX28_PAD_AUART2_TX__AUART2_TX
353 >;
354 fsl,drive-strength = <MXS_DRIVE_4mA>;
355 fsl,voltage = <MXS_VOLTAGE_HIGH>;
356 fsl,pull-up = <MXS_PULL_DISABLE>;
357 };
358
359 auart2_pins_a: auart2-pins@0 {
360 reg = <0>;
361 fsl,pinmux-ids = <
362 MX28_PAD_AUART2_RX__AUART2_RX
363 MX28_PAD_AUART2_TX__AUART2_TX
364 MX28_PAD_AUART2_CTS__AUART2_CTS
365 MX28_PAD_AUART2_RTS__AUART2_RTS
366 >;
367 fsl,drive-strength = <MXS_DRIVE_4mA>;
368 fsl,voltage = <MXS_VOLTAGE_HIGH>;
369 fsl,pull-up = <MXS_PULL_DISABLE>;
370 };
371
372 auart3_pins_a: auart3@0 {
373 reg = <0>;
374 fsl,pinmux-ids = <
375 MX28_PAD_AUART3_RX__AUART3_RX
376 MX28_PAD_AUART3_TX__AUART3_TX
377 MX28_PAD_AUART3_CTS__AUART3_CTS
378 MX28_PAD_AUART3_RTS__AUART3_RTS
379 >;
380 fsl,drive-strength = <MXS_DRIVE_4mA>;
381 fsl,voltage = <MXS_VOLTAGE_HIGH>;
382 fsl,pull-up = <MXS_PULL_DISABLE>;
383 };
384
385 auart3_2pins_a: auart3-2pins@0 {
386 reg = <0>;
387 fsl,pinmux-ids = <
388 MX28_PAD_SSP2_MISO__AUART3_RX
389 MX28_PAD_SSP2_SS0__AUART3_TX
390 >;
391 fsl,drive-strength = <MXS_DRIVE_4mA>;
392 fsl,voltage = <MXS_VOLTAGE_HIGH>;
393 fsl,pull-up = <MXS_PULL_DISABLE>;
394 };
395
396 auart3_2pins_b: auart3-2pins@1 {
397 reg = <1>;
398 fsl,pinmux-ids = <
399 MX28_PAD_AUART3_RX__AUART3_RX
400 MX28_PAD_AUART3_TX__AUART3_TX
401 >;
402 fsl,drive-strength = <MXS_DRIVE_4mA>;
403 fsl,voltage = <MXS_VOLTAGE_HIGH>;
404 fsl,pull-up = <MXS_PULL_DISABLE>;
405 };
406
407 auart4_2pins_a: auart4@0 {
408 reg = <0>;
409 fsl,pinmux-ids = <
410 MX28_PAD_SSP3_SCK__AUART4_TX
411 MX28_PAD_SSP3_MOSI__AUART4_RX
412 >;
413 fsl,drive-strength = <MXS_DRIVE_4mA>;
414 fsl,voltage = <MXS_VOLTAGE_HIGH>;
415 fsl,pull-up = <MXS_PULL_DISABLE>;
416 };
417
418 auart4_2pins_b: auart4@1 {
419 reg = <1>;
420 fsl,pinmux-ids = <
421 MX28_PAD_AUART0_CTS__AUART4_RX
422 MX28_PAD_AUART0_RTS__AUART4_TX
423 >;
424 fsl,drive-strength = <MXS_DRIVE_4mA>;
425 fsl,voltage = <MXS_VOLTAGE_HIGH>;
426 fsl,pull-up = <MXS_PULL_DISABLE>;
427 };
428
429 mac0_pins_a: mac0@0 {
430 reg = <0>;
431 fsl,pinmux-ids = <
432 MX28_PAD_ENET0_MDC__ENET0_MDC
433 MX28_PAD_ENET0_MDIO__ENET0_MDIO
434 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
435 MX28_PAD_ENET0_RXD0__ENET0_RXD0
436 MX28_PAD_ENET0_RXD1__ENET0_RXD1
437 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
438 MX28_PAD_ENET0_TXD0__ENET0_TXD0
439 MX28_PAD_ENET0_TXD1__ENET0_TXD1
440 MX28_PAD_ENET_CLK__CLKCTRL_ENET
441 >;
442 fsl,drive-strength = <MXS_DRIVE_8mA>;
443 fsl,voltage = <MXS_VOLTAGE_HIGH>;
444 fsl,pull-up = <MXS_PULL_ENABLE>;
445 };
446
447 mac0_pins_b: mac0@1 {
448 reg = <1>;
449 fsl,pinmux-ids = <
450 MX28_PAD_ENET0_MDC__ENET0_MDC
451 MX28_PAD_ENET0_MDIO__ENET0_MDIO
452 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
453 MX28_PAD_ENET0_RXD0__ENET0_RXD0
454 MX28_PAD_ENET0_RXD1__ENET0_RXD1
455 MX28_PAD_ENET0_RXD2__ENET0_RXD2
456 MX28_PAD_ENET0_RXD3__ENET0_RXD3
457 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
458 MX28_PAD_ENET0_TXD0__ENET0_TXD0
459 MX28_PAD_ENET0_TXD1__ENET0_TXD1
460 MX28_PAD_ENET0_TXD2__ENET0_TXD2
461 MX28_PAD_ENET0_TXD3__ENET0_TXD3
462 MX28_PAD_ENET_CLK__CLKCTRL_ENET
463 MX28_PAD_ENET0_COL__ENET0_COL
464 MX28_PAD_ENET0_CRS__ENET0_CRS
465 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
466 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
467 >;
468 fsl,drive-strength = <MXS_DRIVE_8mA>;
469 fsl,voltage = <MXS_VOLTAGE_HIGH>;
470 fsl,pull-up = <MXS_PULL_ENABLE>;
471 };
472
473 mac1_pins_a: mac1@0 {
474 reg = <0>;
475 fsl,pinmux-ids = <
476 MX28_PAD_ENET0_CRS__ENET1_RX_EN
477 MX28_PAD_ENET0_RXD2__ENET1_RXD0
478 MX28_PAD_ENET0_RXD3__ENET1_RXD1
479 MX28_PAD_ENET0_COL__ENET1_TX_EN
480 MX28_PAD_ENET0_TXD2__ENET1_TXD0
481 MX28_PAD_ENET0_TXD3__ENET1_TXD1
482 >;
483 fsl,drive-strength = <MXS_DRIVE_8mA>;
484 fsl,voltage = <MXS_VOLTAGE_HIGH>;
485 fsl,pull-up = <MXS_PULL_ENABLE>;
486 };
487
488 mmc0_8bit_pins_a: mmc0-8bit@0 {
489 reg = <0>;
490 fsl,pinmux-ids = <
491 MX28_PAD_SSP0_DATA0__SSP0_D0
492 MX28_PAD_SSP0_DATA1__SSP0_D1
493 MX28_PAD_SSP0_DATA2__SSP0_D2
494 MX28_PAD_SSP0_DATA3__SSP0_D3
495 MX28_PAD_SSP0_DATA4__SSP0_D4
496 MX28_PAD_SSP0_DATA5__SSP0_D5
497 MX28_PAD_SSP0_DATA6__SSP0_D6
498 MX28_PAD_SSP0_DATA7__SSP0_D7
499 MX28_PAD_SSP0_CMD__SSP0_CMD
500 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
501 MX28_PAD_SSP0_SCK__SSP0_SCK
502 >;
503 fsl,drive-strength = <MXS_DRIVE_8mA>;
504 fsl,voltage = <MXS_VOLTAGE_HIGH>;
505 fsl,pull-up = <MXS_PULL_ENABLE>;
506 };
507
508 mmc0_4bit_pins_a: mmc0-4bit@0 {
509 reg = <0>;
510 fsl,pinmux-ids = <
511 MX28_PAD_SSP0_DATA0__SSP0_D0
512 MX28_PAD_SSP0_DATA1__SSP0_D1
513 MX28_PAD_SSP0_DATA2__SSP0_D2
514 MX28_PAD_SSP0_DATA3__SSP0_D3
515 MX28_PAD_SSP0_CMD__SSP0_CMD
516 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
517 MX28_PAD_SSP0_SCK__SSP0_SCK
518 >;
519 fsl,drive-strength = <MXS_DRIVE_8mA>;
520 fsl,voltage = <MXS_VOLTAGE_HIGH>;
521 fsl,pull-up = <MXS_PULL_ENABLE>;
522 };
523
524 mmc0_cd_cfg: mmc0-cd-cfg@0 {
525 reg = <0>;
526 fsl,pinmux-ids = <
527 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
528 >;
529 fsl,pull-up = <MXS_PULL_DISABLE>;
530 };
531
532 mmc0_sck_cfg: mmc0-sck-cfg@0 {
533 reg = <0>;
534 fsl,pinmux-ids = <
535 MX28_PAD_SSP0_SCK__SSP0_SCK
536 >;
537 fsl,drive-strength = <MXS_DRIVE_12mA>;
538 fsl,pull-up = <MXS_PULL_DISABLE>;
539 };
540
541 mmc1_4bit_pins_a: mmc1-4bit@0 {
542 reg = <0>;
543 fsl,pinmux-ids = <
544 MX28_PAD_GPMI_D00__SSP1_D0
545 MX28_PAD_GPMI_D01__SSP1_D1
546 MX28_PAD_GPMI_D02__SSP1_D2
547 MX28_PAD_GPMI_D03__SSP1_D3
548 MX28_PAD_GPMI_RDY1__SSP1_CMD
549 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
550 MX28_PAD_GPMI_WRN__SSP1_SCK
551 >;
552 fsl,drive-strength = <MXS_DRIVE_8mA>;
553 fsl,voltage = <MXS_VOLTAGE_HIGH>;
554 fsl,pull-up = <MXS_PULL_ENABLE>;
555 };
556
557 mmc1_cd_cfg: mmc1-cd-cfg@0 {
558 reg = <0>;
559 fsl,pinmux-ids = <
560 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
561 >;
562 fsl,pull-up = <MXS_PULL_DISABLE>;
563 };
564
565 mmc1_sck_cfg: mmc1-sck-cfg@0 {
566 reg = <0>;
567 fsl,pinmux-ids = <
568 MX28_PAD_GPMI_WRN__SSP1_SCK
569 >;
570 fsl,drive-strength = <MXS_DRIVE_12mA>;
571 fsl,pull-up = <MXS_PULL_DISABLE>;
572 };
573
574
575 mmc2_4bit_pins_a: mmc2-4bit@0 {
576 reg = <0>;
577 fsl,pinmux-ids = <
578 MX28_PAD_SSP0_DATA4__SSP2_D0
579 MX28_PAD_SSP1_SCK__SSP2_D1
580 MX28_PAD_SSP1_CMD__SSP2_D2
581 MX28_PAD_SSP0_DATA5__SSP2_D3
582 MX28_PAD_SSP0_DATA6__SSP2_CMD
583 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
584 MX28_PAD_SSP0_DATA7__SSP2_SCK
585 >;
586 fsl,drive-strength = <MXS_DRIVE_8mA>;
587 fsl,voltage = <MXS_VOLTAGE_HIGH>;
588 fsl,pull-up = <MXS_PULL_ENABLE>;
589 };
590
591 mmc2_4bit_pins_b: mmc2-4bit@1 {
592 reg = <1>;
593 fsl,pinmux-ids = <
594 MX28_PAD_SSP2_SCK__SSP2_SCK
595 MX28_PAD_SSP2_MOSI__SSP2_CMD
596 MX28_PAD_SSP2_MISO__SSP2_D0
597 MX28_PAD_SSP2_SS0__SSP2_D3
598 MX28_PAD_SSP2_SS1__SSP2_D1
599 MX28_PAD_SSP2_SS2__SSP2_D2
600 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
601 >;
602 fsl,drive-strength = <MXS_DRIVE_8mA>;
603 fsl,voltage = <MXS_VOLTAGE_HIGH>;
604 fsl,pull-up = <MXS_PULL_ENABLE>;
605 };
606
607 mmc2_cd_cfg: mmc2-cd-cfg@0 {
608 reg = <0>;
609 fsl,pinmux-ids = <
610 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
611 >;
612 fsl,pull-up = <MXS_PULL_DISABLE>;
613 };
614
615 mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
616 reg = <0>;
617 fsl,pinmux-ids = <
618 MX28_PAD_SSP0_DATA7__SSP2_SCK
619 >;
620 fsl,drive-strength = <MXS_DRIVE_12mA>;
621 fsl,pull-up = <MXS_PULL_DISABLE>;
622 };
623
624 mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
625 reg = <1>;
626 fsl,pinmux-ids = <
627 MX28_PAD_SSP2_SCK__SSP2_SCK
628 >;
629 fsl,drive-strength = <MXS_DRIVE_12mA>;
630 fsl,pull-up = <MXS_PULL_DISABLE>;
631 };
632
633 i2c0_pins_a: i2c0@0 {
634 reg = <0>;
635 fsl,pinmux-ids = <
636 MX28_PAD_I2C0_SCL__I2C0_SCL
637 MX28_PAD_I2C0_SDA__I2C0_SDA
638 >;
639 fsl,drive-strength = <MXS_DRIVE_8mA>;
640 fsl,voltage = <MXS_VOLTAGE_HIGH>;
641 fsl,pull-up = <MXS_PULL_ENABLE>;
642 };
643
644 i2c0_pins_b: i2c0@1 {
645 reg = <1>;
646 fsl,pinmux-ids = <
647 MX28_PAD_AUART0_RX__I2C0_SCL
648 MX28_PAD_AUART0_TX__I2C0_SDA
649 >;
650 fsl,drive-strength = <MXS_DRIVE_8mA>;
651 fsl,voltage = <MXS_VOLTAGE_HIGH>;
652 fsl,pull-up = <MXS_PULL_ENABLE>;
653 };
654
655 i2c1_pins_a: i2c1@0 {
656 reg = <0>;
657 fsl,pinmux-ids = <
658 MX28_PAD_PWM0__I2C1_SCL
659 MX28_PAD_PWM1__I2C1_SDA
660 >;
661 fsl,drive-strength = <MXS_DRIVE_8mA>;
662 fsl,voltage = <MXS_VOLTAGE_HIGH>;
663 fsl,pull-up = <MXS_PULL_ENABLE>;
664 };
665
666 i2c1_pins_b: i2c1@1 {
667 reg = <1>;
668 fsl,pinmux-ids = <
669 MX28_PAD_AUART2_CTS__I2C1_SCL
670 MX28_PAD_AUART2_RTS__I2C1_SDA
671 >;
672 fsl,drive-strength = <MXS_DRIVE_8mA>;
673 fsl,voltage = <MXS_VOLTAGE_HIGH>;
674 fsl,pull-up = <MXS_PULL_ENABLE>;
675 };
676
677 saif0_pins_a: saif0@0 {
678 reg = <0>;
679 fsl,pinmux-ids = <
680 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
681 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
682 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
683 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
684 >;
685 fsl,drive-strength = <MXS_DRIVE_12mA>;
686 fsl,voltage = <MXS_VOLTAGE_HIGH>;
687 fsl,pull-up = <MXS_PULL_ENABLE>;
688 };
689
690 saif0_pins_b: saif0@1 {
691 reg = <1>;
692 fsl,pinmux-ids = <
693 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
694 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
695 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
696 >;
697 fsl,drive-strength = <MXS_DRIVE_12mA>;
698 fsl,voltage = <MXS_VOLTAGE_HIGH>;
699 fsl,pull-up = <MXS_PULL_ENABLE>;
700 };
701
702 saif1_pins_a: saif1@0 {
703 reg = <0>;
704 fsl,pinmux-ids = <
705 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
706 >;
707 fsl,drive-strength = <MXS_DRIVE_12mA>;
708 fsl,voltage = <MXS_VOLTAGE_HIGH>;
709 fsl,pull-up = <MXS_PULL_ENABLE>;
710 };
711
712 pwm0_pins_a: pwm0@0 {
713 reg = <0>;
714 fsl,pinmux-ids = <
715 MX28_PAD_PWM0__PWM_0
716 >;
717 fsl,drive-strength = <MXS_DRIVE_4mA>;
718 fsl,voltage = <MXS_VOLTAGE_HIGH>;
719 fsl,pull-up = <MXS_PULL_DISABLE>;
720 };
721
722 pwm2_pins_a: pwm2@0 {
723 reg = <0>;
724 fsl,pinmux-ids = <
725 MX28_PAD_PWM2__PWM_2
726 >;
727 fsl,drive-strength = <MXS_DRIVE_4mA>;
728 fsl,voltage = <MXS_VOLTAGE_HIGH>;
729 fsl,pull-up = <MXS_PULL_DISABLE>;
730 };
731
732 pwm3_pins_a: pwm3@0 {
733 reg = <0>;
734 fsl,pinmux-ids = <
735 MX28_PAD_PWM3__PWM_3
736 >;
737 fsl,drive-strength = <MXS_DRIVE_4mA>;
738 fsl,voltage = <MXS_VOLTAGE_HIGH>;
739 fsl,pull-up = <MXS_PULL_DISABLE>;
740 };
741
742 pwm3_pins_b: pwm3@1 {
743 reg = <1>;
744 fsl,pinmux-ids = <
745 MX28_PAD_SAIF0_MCLK__PWM_3
746 >;
747 fsl,drive-strength = <MXS_DRIVE_4mA>;
748 fsl,voltage = <MXS_VOLTAGE_HIGH>;
749 fsl,pull-up = <MXS_PULL_DISABLE>;
750 };
751
752 pwm4_pins_a: pwm4@0 {
753 reg = <0>;
754 fsl,pinmux-ids = <
755 MX28_PAD_PWM4__PWM_4
756 >;
757 fsl,drive-strength = <MXS_DRIVE_4mA>;
758 fsl,voltage = <MXS_VOLTAGE_HIGH>;
759 fsl,pull-up = <MXS_PULL_DISABLE>;
760 };
761
762 lcdif_24bit_pins_a: lcdif-24bit@0 {
763 reg = <0>;
764 fsl,pinmux-ids = <
765 MX28_PAD_LCD_D00__LCD_D0
766 MX28_PAD_LCD_D01__LCD_D1
767 MX28_PAD_LCD_D02__LCD_D2
768 MX28_PAD_LCD_D03__LCD_D3
769 MX28_PAD_LCD_D04__LCD_D4
770 MX28_PAD_LCD_D05__LCD_D5
771 MX28_PAD_LCD_D06__LCD_D6
772 MX28_PAD_LCD_D07__LCD_D7
773 MX28_PAD_LCD_D08__LCD_D8
774 MX28_PAD_LCD_D09__LCD_D9
775 MX28_PAD_LCD_D10__LCD_D10
776 MX28_PAD_LCD_D11__LCD_D11
777 MX28_PAD_LCD_D12__LCD_D12
778 MX28_PAD_LCD_D13__LCD_D13
779 MX28_PAD_LCD_D14__LCD_D14
780 MX28_PAD_LCD_D15__LCD_D15
781 MX28_PAD_LCD_D16__LCD_D16
782 MX28_PAD_LCD_D17__LCD_D17
783 MX28_PAD_LCD_D18__LCD_D18
784 MX28_PAD_LCD_D19__LCD_D19
785 MX28_PAD_LCD_D20__LCD_D20
786 MX28_PAD_LCD_D21__LCD_D21
787 MX28_PAD_LCD_D22__LCD_D22
788 MX28_PAD_LCD_D23__LCD_D23
789 >;
790 fsl,drive-strength = <MXS_DRIVE_4mA>;
791 fsl,voltage = <MXS_VOLTAGE_HIGH>;
792 fsl,pull-up = <MXS_PULL_DISABLE>;
793 };
794
795 lcdif_18bit_pins_a: lcdif-18bit@0 {
796 reg = <0>;
797 fsl,pinmux-ids = <
798 MX28_PAD_LCD_D00__LCD_D0
799 MX28_PAD_LCD_D01__LCD_D1
800 MX28_PAD_LCD_D02__LCD_D2
801 MX28_PAD_LCD_D03__LCD_D3
802 MX28_PAD_LCD_D04__LCD_D4
803 MX28_PAD_LCD_D05__LCD_D5
804 MX28_PAD_LCD_D06__LCD_D6
805 MX28_PAD_LCD_D07__LCD_D7
806 MX28_PAD_LCD_D08__LCD_D8
807 MX28_PAD_LCD_D09__LCD_D9
808 MX28_PAD_LCD_D10__LCD_D10
809 MX28_PAD_LCD_D11__LCD_D11
810 MX28_PAD_LCD_D12__LCD_D12
811 MX28_PAD_LCD_D13__LCD_D13
812 MX28_PAD_LCD_D14__LCD_D14
813 MX28_PAD_LCD_D15__LCD_D15
814 MX28_PAD_LCD_D16__LCD_D16
815 MX28_PAD_LCD_D17__LCD_D17
816 >;
817 fsl,drive-strength = <MXS_DRIVE_4mA>;
818 fsl,voltage = <MXS_VOLTAGE_HIGH>;
819 fsl,pull-up = <MXS_PULL_DISABLE>;
820 };
821
822 lcdif_16bit_pins_a: lcdif-16bit@0 {
823 reg = <0>;
824 fsl,pinmux-ids = <
825 MX28_PAD_LCD_D00__LCD_D0
826 MX28_PAD_LCD_D01__LCD_D1
827 MX28_PAD_LCD_D02__LCD_D2
828 MX28_PAD_LCD_D03__LCD_D3
829 MX28_PAD_LCD_D04__LCD_D4
830 MX28_PAD_LCD_D05__LCD_D5
831 MX28_PAD_LCD_D06__LCD_D6
832 MX28_PAD_LCD_D07__LCD_D7
833 MX28_PAD_LCD_D08__LCD_D8
834 MX28_PAD_LCD_D09__LCD_D9
835 MX28_PAD_LCD_D10__LCD_D10
836 MX28_PAD_LCD_D11__LCD_D11
837 MX28_PAD_LCD_D12__LCD_D12
838 MX28_PAD_LCD_D13__LCD_D13
839 MX28_PAD_LCD_D14__LCD_D14
840 MX28_PAD_LCD_D15__LCD_D15
841 >;
842 fsl,drive-strength = <MXS_DRIVE_4mA>;
843 fsl,voltage = <MXS_VOLTAGE_HIGH>;
844 fsl,pull-up = <MXS_PULL_DISABLE>;
845 };
846
847 lcdif_sync_pins_a: lcdif-sync@0 {
848 reg = <0>;
849 fsl,pinmux-ids = <
850 MX28_PAD_LCD_RS__LCD_DOTCLK
851 MX28_PAD_LCD_CS__LCD_ENABLE
852 MX28_PAD_LCD_RD_E__LCD_VSYNC
853 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
854 >;
855 fsl,drive-strength = <MXS_DRIVE_4mA>;
856 fsl,voltage = <MXS_VOLTAGE_HIGH>;
857 fsl,pull-up = <MXS_PULL_DISABLE>;
858 };
859
860 can0_pins_a: can0@0 {
861 reg = <0>;
862 fsl,pinmux-ids = <
863 MX28_PAD_GPMI_RDY2__CAN0_TX
864 MX28_PAD_GPMI_RDY3__CAN0_RX
865 >;
866 fsl,drive-strength = <MXS_DRIVE_4mA>;
867 fsl,voltage = <MXS_VOLTAGE_HIGH>;
868 fsl,pull-up = <MXS_PULL_DISABLE>;
869 };
870
871 can1_pins_a: can1@0 {
872 reg = <0>;
873 fsl,pinmux-ids = <
874 MX28_PAD_GPMI_CE2N__CAN1_TX
875 MX28_PAD_GPMI_CE3N__CAN1_RX
876 >;
877 fsl,drive-strength = <MXS_DRIVE_4mA>;
878 fsl,voltage = <MXS_VOLTAGE_HIGH>;
879 fsl,pull-up = <MXS_PULL_DISABLE>;
880 };
881
882 spi2_pins_a: spi2@0 {
883 reg = <0>;
884 fsl,pinmux-ids = <
885 MX28_PAD_SSP2_SCK__SSP2_SCK
886 MX28_PAD_SSP2_MOSI__SSP2_CMD
887 MX28_PAD_SSP2_MISO__SSP2_D0
888 MX28_PAD_SSP2_SS0__SSP2_D3
889 >;
890 fsl,drive-strength = <MXS_DRIVE_8mA>;
891 fsl,voltage = <MXS_VOLTAGE_HIGH>;
892 fsl,pull-up = <MXS_PULL_ENABLE>;
893 };
894
895 spi3_pins_a: spi3@0 {
896 reg = <0>;
897 fsl,pinmux-ids = <
898 MX28_PAD_AUART2_RX__SSP3_D4
899 MX28_PAD_AUART2_TX__SSP3_D5
900 MX28_PAD_SSP3_SCK__SSP3_SCK
901 MX28_PAD_SSP3_MOSI__SSP3_CMD
902 MX28_PAD_SSP3_MISO__SSP3_D0
903 MX28_PAD_SSP3_SS0__SSP3_D3
904 >;
905 fsl,drive-strength = <MXS_DRIVE_8mA>;
906 fsl,voltage = <MXS_VOLTAGE_HIGH>;
907 fsl,pull-up = <MXS_PULL_DISABLE>;
908 };
909
910 spi3_pins_b: spi3@1 {
911 reg = <1>;
912 fsl,pinmux-ids = <
913 MX28_PAD_SSP3_SCK__SSP3_SCK
914 MX28_PAD_SSP3_MOSI__SSP3_CMD
915 MX28_PAD_SSP3_MISO__SSP3_D0
916 MX28_PAD_SSP3_SS0__SSP3_D3
917 >;
918 fsl,drive-strength = <MXS_DRIVE_8mA>;
919 fsl,voltage = <MXS_VOLTAGE_HIGH>;
920 fsl,pull-up = <MXS_PULL_ENABLE>;
921 };
922
923 usb0_pins_a: usb0@0 {
924 reg = <0>;
925 fsl,pinmux-ids = <
926 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
927 >;
928 fsl,drive-strength = <MXS_DRIVE_12mA>;
929 fsl,voltage = <MXS_VOLTAGE_HIGH>;
930 fsl,pull-up = <MXS_PULL_DISABLE>;
931 };
932
933 usb0_pins_b: usb0@1 {
934 reg = <1>;
935 fsl,pinmux-ids = <
936 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
937 >;
938 fsl,drive-strength = <MXS_DRIVE_12mA>;
939 fsl,voltage = <MXS_VOLTAGE_HIGH>;
940 fsl,pull-up = <MXS_PULL_DISABLE>;
941 };
942
943 usb1_pins_a: usb1@0 {
944 reg = <0>;
945 fsl,pinmux-ids = <
946 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
947 >;
948 fsl,drive-strength = <MXS_DRIVE_12mA>;
949 fsl,voltage = <MXS_VOLTAGE_HIGH>;
950 fsl,pull-up = <MXS_PULL_DISABLE>;
951 };
952
953 usb1_pins_b: usb1@1 {
954 reg = <1>;
955 fsl,pinmux-ids = <
956 MX28_PAD_PWM2__USB1_OVERCURRENT
957 >;
958 fsl,drive-strength = <MXS_DRIVE_12mA>;
959 fsl,voltage = <MXS_VOLTAGE_HIGH>;
960 fsl,pull-up = <MXS_PULL_DISABLE>;
961 };
962
963 usb0_id_pins_a: usb0id@0 {
964 reg = <0>;
965 fsl,pinmux-ids = <
966 MX28_PAD_AUART1_RTS__USB0_ID
967 >;
968 fsl,drive-strength = <MXS_DRIVE_12mA>;
969 fsl,voltage = <MXS_VOLTAGE_HIGH>;
970 fsl,pull-up = <MXS_PULL_ENABLE>;
971 };
972
973 usb0_id_pins_b: usb0id1@0 {
974 reg = <0>;
975 fsl,pinmux-ids = <
976 MX28_PAD_PWM2__USB0_ID
977 >;
978 fsl,drive-strength = <MXS_DRIVE_12mA>;
979 fsl,voltage = <MXS_VOLTAGE_HIGH>;
980 fsl,pull-up = <MXS_PULL_ENABLE>;
981 };
982
983 };
984
985 digctl: digctl@8001c000 {
986 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
987 reg = <0x8001c000 0x2000>;
988 interrupts = <89>;
989 status = "disabled";
990 };
991
992 etm: etm@80022000 {
993 reg = <0x80022000 0x2000>;
994 status = "disabled";
995 };
996
997 dma_apbx: dma-apbx@80024000 {
998 compatible = "fsl,imx28-dma-apbx";
999 reg = <0x80024000 0x2000>;
1000 interrupts = <78 79 66 0
1001 80 81 68 69
1002 70 71 72 73
1003 74 75 76 77>;
1004 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
1005 "saif0", "saif1", "i2c0", "i2c1",
1006 "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
1007 "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
1008 #dma-cells = <1>;
1009 dma-channels = <16>;
1010 clocks = <&clks 26>;
1011 };
1012
1013 dcp: crypto@80028000 {
1014 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
1015 reg = <0x80028000 0x2000>;
1016 interrupts = <52 53 54>;
1017 status = "okay";
1018 };
1019
1020 pxp: pxp@8002a000 {
1021 reg = <0x8002a000 0x2000>;
1022 interrupts = <39>;
1023 status = "disabled";
1024 };
1025
1026 ocotp: efuse@8002c000 {
1027 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
1028 #address-cells = <1>;
1029 #size-cells = <1>;
1030 reg = <0x8002c000 0x2000>;
1031 clocks = <&clks 25>;
1032 };
1033
1034 axi-ahb@8002e000 {
1035 reg = <0x8002e000 0x2000>;
1036 status = "disabled";
1037 };
1038
1039 lcdif: lcdif@80030000 {
1040 compatible = "fsl,imx28-lcdif";
1041 reg = <0x80030000 0x2000>;
1042 interrupts = <38>;
1043 clocks = <&clks 55>;
1044 dmas = <&dma_apbh 13>;
1045 dma-names = "rx";
1046 status = "disabled";
1047 };
1048
1049 can0: can@80032000 {
1050 compatible = "fsl,imx28-flexcan";
1051 reg = <0x80032000 0x2000>;
1052 interrupts = <8>;
1053 clocks = <&clks 58>, <&clks 58>;
1054 clock-names = "ipg", "per";
1055 status = "disabled";
1056 };
1057
1058 can1: can@80034000 {
1059 compatible = "fsl,imx28-flexcan";
1060 reg = <0x80034000 0x2000>;
1061 interrupts = <9>;
1062 clocks = <&clks 59>, <&clks 59>;
1063 clock-names = "ipg", "per";
1064 status = "disabled";
1065 };
1066
1067 simdbg: simdbg@8003c000 {
1068 reg = <0x8003c000 0x200>;
1069 status = "disabled";
1070 };
1071
1072 simgpmisel: simgpmisel@8003c200 {
1073 reg = <0x8003c200 0x100>;
1074 status = "disabled";
1075 };
1076
1077 simsspsel: simsspsel@8003c300 {
1078 reg = <0x8003c300 0x100>;
1079 status = "disabled";
1080 };
1081
1082 simmemsel: simmemsel@8003c400 {
1083 reg = <0x8003c400 0x100>;
1084 status = "disabled";
1085 };
1086
1087 gpiomon: gpiomon@8003c500 {
1088 reg = <0x8003c500 0x100>;
1089 status = "disabled";
1090 };
1091
1092 simenet: simenet@8003c700 {
1093 reg = <0x8003c700 0x100>;
1094 status = "disabled";
1095 };
1096
1097 armjtag: armjtag@8003c800 {
1098 reg = <0x8003c800 0x100>;
1099 status = "disabled";
1100 };
1101 };
1102
1103 apbx@80040000 {
1104 compatible = "simple-bus";
1105 #address-cells = <1>;
1106 #size-cells = <1>;
1107 reg = <0x80040000 0x40000>;
1108 ranges;
1109
1110 clks: clkctrl@80040000 {
1111 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1112 reg = <0x80040000 0x2000>;
1113 #clock-cells = <1>;
1114 };
1115
1116 saif0: saif@80042000 {
1117 #sound-dai-cells = <0>;
1118 compatible = "fsl,imx28-saif";
1119 reg = <0x80042000 0x2000>;
1120 interrupts = <59>;
1121 #clock-cells = <0>;
1122 clocks = <&clks 53>;
1123 dmas = <&dma_apbx 4>;
1124 dma-names = "rx-tx";
1125 status = "disabled";
1126 };
1127
1128 power: power@80044000 {
1129 reg = <0x80044000 0x2000>;
1130 status = "disabled";
1131 };
1132
1133 saif1: saif@80046000 {
1134 #sound-dai-cells = <0>;
1135 compatible = "fsl,imx28-saif";
1136 reg = <0x80046000 0x2000>;
1137 interrupts = <58>;
1138 clocks = <&clks 54>;
1139 dmas = <&dma_apbx 5>;
1140 dma-names = "rx-tx";
1141 status = "disabled";
1142 };
1143
1144 lradc: lradc@80050000 {
1145 compatible = "fsl,imx28-lradc";
1146 reg = <0x80050000 0x2000>;
1147 interrupts = <10 14 15 16 17 18 19
1148 20 21 22 23 24 25>;
1149 status = "disabled";
1150 clocks = <&clks 41>;
1151 #io-channel-cells = <1>;
1152 };
1153
1154 spdif: spdif@80054000 {
1155 reg = <0x80054000 0x2000>;
1156 interrupts = <45>;
1157 dmas = <&dma_apbx 2>;
1158 dma-names = "tx";
1159 status = "disabled";
1160 };
1161
1162 mxs_rtc: rtc@80056000 {
1163 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1164 reg = <0x80056000 0x2000>;
1165 interrupts = <29>;
1166 };
1167
1168 i2c0: i2c@80058000 {
1169 #address-cells = <1>;
1170 #size-cells = <0>;
1171 compatible = "fsl,imx28-i2c";
1172 reg = <0x80058000 0x2000>;
1173 interrupts = <111>;
1174 clock-frequency = <100000>;
1175 dmas = <&dma_apbx 6>;
1176 dma-names = "rx-tx";
1177 status = "disabled";
1178 };
1179
1180 i2c1: i2c@8005a000 {
1181 #address-cells = <1>;
1182 #size-cells = <0>;
1183 compatible = "fsl,imx28-i2c";
1184 reg = <0x8005a000 0x2000>;
1185 interrupts = <110>;
1186 clock-frequency = <100000>;
1187 dmas = <&dma_apbx 7>;
1188 dma-names = "rx-tx";
1189 status = "disabled";
1190 };
1191
1192 pwm: pwm@80064000 {
1193 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1194 reg = <0x80064000 0x2000>;
1195 clocks = <&clks 44>;
1196 #pwm-cells = <2>;
1197 fsl,pwm-number = <8>;
1198 status = "disabled";
1199 };
1200
1201 timer: timrot@80068000 {
1202 compatible = "fsl,imx28-timrot", "fsl,timrot";
1203 reg = <0x80068000 0x2000>;
1204 interrupts = <48 49 50 51>;
1205 clocks = <&clks 26>;
1206 };
1207
1208 auart0: serial@8006a000 {
1209 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1210 reg = <0x8006a000 0x2000>;
1211 interrupts = <112>;
1212 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1213 dma-names = "rx", "tx";
1214 clocks = <&clks 45>;
1215 status = "disabled";
1216 };
1217
1218 auart1: serial@8006c000 {
1219 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1220 reg = <0x8006c000 0x2000>;
1221 interrupts = <113>;
1222 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1223 dma-names = "rx", "tx";
1224 clocks = <&clks 45>;
1225 status = "disabled";
1226 };
1227
1228 auart2: serial@8006e000 {
1229 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1230 reg = <0x8006e000 0x2000>;
1231 interrupts = <114>;
1232 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1233 dma-names = "rx", "tx";
1234 clocks = <&clks 45>;
1235 status = "disabled";
1236 };
1237
1238 auart3: serial@80070000 {
1239 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1240 reg = <0x80070000 0x2000>;
1241 interrupts = <115>;
1242 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1243 dma-names = "rx", "tx";
1244 clocks = <&clks 45>;
1245 status = "disabled";
1246 };
1247
1248 auart4: serial@80072000 {
1249 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1250 reg = <0x80072000 0x2000>;
1251 interrupts = <116>;
1252 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1253 dma-names = "rx", "tx";
1254 clocks = <&clks 45>;
1255 status = "disabled";
1256 };
1257
1258 duart: serial@80074000 {
1259 compatible = "arm,pl011", "arm,primecell";
1260 reg = <0x80074000 0x1000>;
1261 interrupts = <47>;
1262 clocks = <&clks 45>, <&clks 26>;
1263 clock-names = "uart", "apb_pclk";
1264 status = "disabled";
1265 };
1266
1267 usbphy0: usbphy@8007c000 {
1268 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1269 reg = <0x8007c000 0x2000>;
1270 clocks = <&clks 62>;
1271 status = "disabled";
1272 };
1273
1274 usbphy1: usbphy@8007e000 {
1275 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1276 reg = <0x8007e000 0x2000>;
1277 clocks = <&clks 63>;
1278 status = "disabled";
1279 };
1280 };
1281 };
1282
1283 ahb@80080000 {
1284 compatible = "simple-bus";
1285 #address-cells = <1>;
1286 #size-cells = <1>;
1287 reg = <0x80080000 0x80000>;
1288 ranges;
1289
1290 usb0: usb@80080000 {
1291 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1292 reg = <0x80080000 0x10000>;
1293 interrupts = <93>;
1294 clocks = <&clks 60>;
1295 fsl,usbphy = <&usbphy0>;
1296 status = "disabled";
1297 };
1298
1299 usb1: usb@80090000 {
1300 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1301 reg = <0x80090000 0x10000>;
1302 interrupts = <92>;
1303 clocks = <&clks 61>;
1304 fsl,usbphy = <&usbphy1>;
1305 dr_mode = "host";
1306 status = "disabled";
1307 };
1308
1309 dflpt: dflpt@800c0000 {
1310 reg = <0x800c0000 0x10000>;
1311 status = "disabled";
1312 };
1313
1314 mac0: ethernet@800f0000 {
1315 compatible = "fsl,imx28-fec";
1316 reg = <0x800f0000 0x4000>;
1317 interrupts = <101>;
1318 clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1319 clock-names = "ipg", "ahb", "enet_out";
1320 status = "disabled";
1321 };
1322
1323 mac1: ethernet@800f4000 {
1324 compatible = "fsl,imx28-fec";
1325 reg = <0x800f4000 0x4000>;
1326 interrupts = <102>;
1327 clocks = <&clks 57>, <&clks 57>;
1328 clock-names = "ipg", "ahb";
1329 status = "disabled";
1330 };
1331
1332 eth_switch: switch@800f8000 {
1333 reg = <0x800f8000 0x8000>;
1334 status = "disabled";
1335 };
1336 };
1337
1338 iio-hwmon {
1339 compatible = "iio-hwmon";
1340 io-channels = <&lradc 8>;
1341 };
1342};
1// SPDX-License-Identifier: GPL-2.0+
2//
3// Copyright 2012 Freescale Semiconductor, Inc.
4
5#include <dt-bindings/gpio/gpio.h>
6#include "imx28-pinfunc.h"
7
8/ {
9 #address-cells = <1>;
10 #size-cells = <1>;
11
12 interrupt-parent = <&icoll>;
13 /*
14 * The decompressor and also some bootloaders rely on a
15 * pre-existing /chosen node to be available to insert the
16 * command line and merge other ATAGS info.
17 */
18 chosen {};
19
20 aliases {
21 ethernet0 = &mac0;
22 ethernet1 = &mac1;
23 gpio0 = &gpio0;
24 gpio1 = &gpio1;
25 gpio2 = &gpio2;
26 gpio3 = &gpio3;
27 gpio4 = &gpio4;
28 saif0 = &saif0;
29 saif1 = &saif1;
30 serial0 = &auart0;
31 serial1 = &auart1;
32 serial2 = &auart2;
33 serial3 = &auart3;
34 serial4 = &auart4;
35 spi0 = &ssp1;
36 spi1 = &ssp2;
37 usbphy0 = &usbphy0;
38 usbphy1 = &usbphy1;
39 };
40
41 cpus {
42 #address-cells = <1>;
43 #size-cells = <0>;
44
45 cpu@0 {
46 compatible = "arm,arm926ej-s";
47 device_type = "cpu";
48 reg = <0>;
49 };
50 };
51
52 apb@80000000 {
53 compatible = "simple-bus";
54 #address-cells = <1>;
55 #size-cells = <1>;
56 reg = <0x80000000 0x80000>;
57 ranges;
58
59 apbh@80000000 {
60 compatible = "simple-bus";
61 #address-cells = <1>;
62 #size-cells = <1>;
63 reg = <0x80000000 0x3c900>;
64 ranges;
65
66 icoll: interrupt-controller@80000000 {
67 compatible = "fsl,imx28-icoll", "fsl,icoll";
68 interrupt-controller;
69 #interrupt-cells = <1>;
70 reg = <0x80000000 0x2000>;
71 };
72
73 hsadc: hsadc@80002000 {
74 reg = <0x80002000 0x2000>;
75 interrupts = <13>;
76 dmas = <&dma_apbh 12>;
77 dma-names = "rx";
78 status = "disabled";
79 };
80
81 dma_apbh: dma-apbh@80004000 {
82 compatible = "fsl,imx28-dma-apbh";
83 reg = <0x80004000 0x2000>;
84 interrupts = <82 83 84 85
85 88 88 88 88
86 88 88 88 88
87 87 86 0 0>;
88 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
89 "gpmi0", "gmpi1", "gpmi2", "gmpi3",
90 "gpmi4", "gmpi5", "gpmi6", "gmpi7",
91 "hsadc", "lcdif", "empty", "empty";
92 #dma-cells = <1>;
93 dma-channels = <16>;
94 clocks = <&clks 25>;
95 };
96
97 perfmon: perfmon@80006000 {
98 reg = <0x80006000 0x800>;
99 interrupts = <27>;
100 status = "disabled";
101 };
102
103 gpmi: gpmi-nand@8000c000 {
104 compatible = "fsl,imx28-gpmi-nand";
105 #address-cells = <1>;
106 #size-cells = <1>;
107 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
108 reg-names = "gpmi-nand", "bch";
109 interrupts = <41>;
110 interrupt-names = "bch";
111 clocks = <&clks 50>;
112 clock-names = "gpmi_io";
113 dmas = <&dma_apbh 4>;
114 dma-names = "rx-tx";
115 status = "disabled";
116 };
117
118 ssp0: spi@80010000 {
119 #address-cells = <1>;
120 #size-cells = <0>;
121 reg = <0x80010000 0x2000>;
122 interrupts = <96>;
123 clocks = <&clks 46>;
124 dmas = <&dma_apbh 0>;
125 dma-names = "rx-tx";
126 status = "disabled";
127 };
128
129 ssp1: spi@80012000 {
130 #address-cells = <1>;
131 #size-cells = <0>;
132 reg = <0x80012000 0x2000>;
133 interrupts = <97>;
134 clocks = <&clks 47>;
135 dmas = <&dma_apbh 1>;
136 dma-names = "rx-tx";
137 status = "disabled";
138 };
139
140 ssp2: spi@80014000 {
141 #address-cells = <1>;
142 #size-cells = <0>;
143 reg = <0x80014000 0x2000>;
144 interrupts = <98>;
145 clocks = <&clks 48>;
146 dmas = <&dma_apbh 2>;
147 dma-names = "rx-tx";
148 status = "disabled";
149 };
150
151 ssp3: spi@80016000 {
152 #address-cells = <1>;
153 #size-cells = <0>;
154 reg = <0x80016000 0x2000>;
155 interrupts = <99>;
156 clocks = <&clks 49>;
157 dmas = <&dma_apbh 3>;
158 dma-names = "rx-tx";
159 status = "disabled";
160 };
161
162 pinctrl: pinctrl@80018000 {
163 #address-cells = <1>;
164 #size-cells = <0>;
165 compatible = "fsl,imx28-pinctrl", "simple-bus";
166 reg = <0x80018000 0x2000>;
167
168 gpio0: gpio@0 {
169 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
170 reg = <0>;
171 interrupts = <127>;
172 gpio-controller;
173 #gpio-cells = <2>;
174 interrupt-controller;
175 #interrupt-cells = <2>;
176 };
177
178 gpio1: gpio@1 {
179 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
180 reg = <1>;
181 interrupts = <126>;
182 gpio-controller;
183 #gpio-cells = <2>;
184 interrupt-controller;
185 #interrupt-cells = <2>;
186 };
187
188 gpio2: gpio@2 {
189 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
190 reg = <2>;
191 interrupts = <125>;
192 gpio-controller;
193 #gpio-cells = <2>;
194 interrupt-controller;
195 #interrupt-cells = <2>;
196 };
197
198 gpio3: gpio@3 {
199 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
200 reg = <3>;
201 interrupts = <124>;
202 gpio-controller;
203 #gpio-cells = <2>;
204 interrupt-controller;
205 #interrupt-cells = <2>;
206 };
207
208 gpio4: gpio@4 {
209 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
210 reg = <4>;
211 interrupts = <123>;
212 gpio-controller;
213 #gpio-cells = <2>;
214 interrupt-controller;
215 #interrupt-cells = <2>;
216 };
217
218 duart_pins_a: duart@0 {
219 reg = <0>;
220 fsl,pinmux-ids = <
221 MX28_PAD_PWM0__DUART_RX
222 MX28_PAD_PWM1__DUART_TX
223 >;
224 fsl,drive-strength = <MXS_DRIVE_4mA>;
225 fsl,voltage = <MXS_VOLTAGE_HIGH>;
226 fsl,pull-up = <MXS_PULL_DISABLE>;
227 };
228
229 duart_pins_b: duart@1 {
230 reg = <1>;
231 fsl,pinmux-ids = <
232 MX28_PAD_AUART0_CTS__DUART_RX
233 MX28_PAD_AUART0_RTS__DUART_TX
234 >;
235 fsl,drive-strength = <MXS_DRIVE_4mA>;
236 fsl,voltage = <MXS_VOLTAGE_HIGH>;
237 fsl,pull-up = <MXS_PULL_DISABLE>;
238 };
239
240 duart_4pins_a: duart-4pins@0 {
241 reg = <0>;
242 fsl,pinmux-ids = <
243 MX28_PAD_AUART0_CTS__DUART_RX
244 MX28_PAD_AUART0_RTS__DUART_TX
245 MX28_PAD_AUART0_RX__DUART_CTS
246 MX28_PAD_AUART0_TX__DUART_RTS
247 >;
248 fsl,drive-strength = <MXS_DRIVE_4mA>;
249 fsl,voltage = <MXS_VOLTAGE_HIGH>;
250 fsl,pull-up = <MXS_PULL_DISABLE>;
251 };
252
253 gpmi_pins_a: gpmi-nand@0 {
254 reg = <0>;
255 fsl,pinmux-ids = <
256 MX28_PAD_GPMI_D00__GPMI_D0
257 MX28_PAD_GPMI_D01__GPMI_D1
258 MX28_PAD_GPMI_D02__GPMI_D2
259 MX28_PAD_GPMI_D03__GPMI_D3
260 MX28_PAD_GPMI_D04__GPMI_D4
261 MX28_PAD_GPMI_D05__GPMI_D5
262 MX28_PAD_GPMI_D06__GPMI_D6
263 MX28_PAD_GPMI_D07__GPMI_D7
264 MX28_PAD_GPMI_CE0N__GPMI_CE0N
265 MX28_PAD_GPMI_RDY0__GPMI_READY0
266 MX28_PAD_GPMI_RDN__GPMI_RDN
267 MX28_PAD_GPMI_WRN__GPMI_WRN
268 MX28_PAD_GPMI_ALE__GPMI_ALE
269 MX28_PAD_GPMI_CLE__GPMI_CLE
270 MX28_PAD_GPMI_RESETN__GPMI_RESETN
271 >;
272 fsl,drive-strength = <MXS_DRIVE_4mA>;
273 fsl,voltage = <MXS_VOLTAGE_HIGH>;
274 fsl,pull-up = <MXS_PULL_DISABLE>;
275 };
276
277 gpmi_status_cfg: gpmi-status-cfg@0 {
278 reg = <0>;
279 fsl,pinmux-ids = <
280 MX28_PAD_GPMI_RDN__GPMI_RDN
281 MX28_PAD_GPMI_WRN__GPMI_WRN
282 MX28_PAD_GPMI_RESETN__GPMI_RESETN
283 >;
284 fsl,drive-strength = <MXS_DRIVE_12mA>;
285 };
286
287 auart0_pins_a: auart0@0 {
288 reg = <0>;
289 fsl,pinmux-ids = <
290 MX28_PAD_AUART0_RX__AUART0_RX
291 MX28_PAD_AUART0_TX__AUART0_TX
292 MX28_PAD_AUART0_CTS__AUART0_CTS
293 MX28_PAD_AUART0_RTS__AUART0_RTS
294 >;
295 fsl,drive-strength = <MXS_DRIVE_4mA>;
296 fsl,voltage = <MXS_VOLTAGE_HIGH>;
297 fsl,pull-up = <MXS_PULL_DISABLE>;
298 };
299
300 auart0_2pins_a: auart0-2pins@0 {
301 reg = <0>;
302 fsl,pinmux-ids = <
303 MX28_PAD_AUART0_RX__AUART0_RX
304 MX28_PAD_AUART0_TX__AUART0_TX
305 >;
306 fsl,drive-strength = <MXS_DRIVE_4mA>;
307 fsl,voltage = <MXS_VOLTAGE_HIGH>;
308 fsl,pull-up = <MXS_PULL_DISABLE>;
309 };
310
311 auart1_pins_a: auart1@0 {
312 reg = <0>;
313 fsl,pinmux-ids = <
314 MX28_PAD_AUART1_RX__AUART1_RX
315 MX28_PAD_AUART1_TX__AUART1_TX
316 MX28_PAD_AUART1_CTS__AUART1_CTS
317 MX28_PAD_AUART1_RTS__AUART1_RTS
318 >;
319 fsl,drive-strength = <MXS_DRIVE_4mA>;
320 fsl,voltage = <MXS_VOLTAGE_HIGH>;
321 fsl,pull-up = <MXS_PULL_DISABLE>;
322 };
323
324 auart1_2pins_a: auart1-2pins@0 {
325 reg = <0>;
326 fsl,pinmux-ids = <
327 MX28_PAD_AUART1_RX__AUART1_RX
328 MX28_PAD_AUART1_TX__AUART1_TX
329 >;
330 fsl,drive-strength = <MXS_DRIVE_4mA>;
331 fsl,voltage = <MXS_VOLTAGE_HIGH>;
332 fsl,pull-up = <MXS_PULL_DISABLE>;
333 };
334
335 auart2_2pins_a: auart2-2pins@0 {
336 reg = <0>;
337 fsl,pinmux-ids = <
338 MX28_PAD_SSP2_SCK__AUART2_RX
339 MX28_PAD_SSP2_MOSI__AUART2_TX
340 >;
341 fsl,drive-strength = <MXS_DRIVE_4mA>;
342 fsl,voltage = <MXS_VOLTAGE_HIGH>;
343 fsl,pull-up = <MXS_PULL_DISABLE>;
344 };
345
346 auart2_2pins_b: auart2-2pins@1 {
347 reg = <1>;
348 fsl,pinmux-ids = <
349 MX28_PAD_AUART2_RX__AUART2_RX
350 MX28_PAD_AUART2_TX__AUART2_TX
351 >;
352 fsl,drive-strength = <MXS_DRIVE_4mA>;
353 fsl,voltage = <MXS_VOLTAGE_HIGH>;
354 fsl,pull-up = <MXS_PULL_DISABLE>;
355 };
356
357 auart2_pins_a: auart2-pins@0 {
358 reg = <0>;
359 fsl,pinmux-ids = <
360 MX28_PAD_AUART2_RX__AUART2_RX
361 MX28_PAD_AUART2_TX__AUART2_TX
362 MX28_PAD_AUART2_CTS__AUART2_CTS
363 MX28_PAD_AUART2_RTS__AUART2_RTS
364 >;
365 fsl,drive-strength = <MXS_DRIVE_4mA>;
366 fsl,voltage = <MXS_VOLTAGE_HIGH>;
367 fsl,pull-up = <MXS_PULL_DISABLE>;
368 };
369
370 auart3_pins_a: auart3@0 {
371 reg = <0>;
372 fsl,pinmux-ids = <
373 MX28_PAD_AUART3_RX__AUART3_RX
374 MX28_PAD_AUART3_TX__AUART3_TX
375 MX28_PAD_AUART3_CTS__AUART3_CTS
376 MX28_PAD_AUART3_RTS__AUART3_RTS
377 >;
378 fsl,drive-strength = <MXS_DRIVE_4mA>;
379 fsl,voltage = <MXS_VOLTAGE_HIGH>;
380 fsl,pull-up = <MXS_PULL_DISABLE>;
381 };
382
383 auart3_2pins_a: auart3-2pins@0 {
384 reg = <0>;
385 fsl,pinmux-ids = <
386 MX28_PAD_SSP2_MISO__AUART3_RX
387 MX28_PAD_SSP2_SS0__AUART3_TX
388 >;
389 fsl,drive-strength = <MXS_DRIVE_4mA>;
390 fsl,voltage = <MXS_VOLTAGE_HIGH>;
391 fsl,pull-up = <MXS_PULL_DISABLE>;
392 };
393
394 auart3_2pins_b: auart3-2pins@1 {
395 reg = <1>;
396 fsl,pinmux-ids = <
397 MX28_PAD_AUART3_RX__AUART3_RX
398 MX28_PAD_AUART3_TX__AUART3_TX
399 >;
400 fsl,drive-strength = <MXS_DRIVE_4mA>;
401 fsl,voltage = <MXS_VOLTAGE_HIGH>;
402 fsl,pull-up = <MXS_PULL_DISABLE>;
403 };
404
405 auart4_2pins_a: auart4@0 {
406 reg = <0>;
407 fsl,pinmux-ids = <
408 MX28_PAD_SSP3_SCK__AUART4_TX
409 MX28_PAD_SSP3_MOSI__AUART4_RX
410 >;
411 fsl,drive-strength = <MXS_DRIVE_4mA>;
412 fsl,voltage = <MXS_VOLTAGE_HIGH>;
413 fsl,pull-up = <MXS_PULL_DISABLE>;
414 };
415
416 auart4_2pins_b: auart4@1 {
417 reg = <1>;
418 fsl,pinmux-ids = <
419 MX28_PAD_AUART0_CTS__AUART4_RX
420 MX28_PAD_AUART0_RTS__AUART4_TX
421 >;
422 fsl,drive-strength = <MXS_DRIVE_4mA>;
423 fsl,voltage = <MXS_VOLTAGE_HIGH>;
424 fsl,pull-up = <MXS_PULL_DISABLE>;
425 };
426
427 mac0_pins_a: mac0@0 {
428 reg = <0>;
429 fsl,pinmux-ids = <
430 MX28_PAD_ENET0_MDC__ENET0_MDC
431 MX28_PAD_ENET0_MDIO__ENET0_MDIO
432 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
433 MX28_PAD_ENET0_RXD0__ENET0_RXD0
434 MX28_PAD_ENET0_RXD1__ENET0_RXD1
435 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
436 MX28_PAD_ENET0_TXD0__ENET0_TXD0
437 MX28_PAD_ENET0_TXD1__ENET0_TXD1
438 MX28_PAD_ENET_CLK__CLKCTRL_ENET
439 >;
440 fsl,drive-strength = <MXS_DRIVE_8mA>;
441 fsl,voltage = <MXS_VOLTAGE_HIGH>;
442 fsl,pull-up = <MXS_PULL_ENABLE>;
443 };
444
445 mac0_pins_b: mac0@1 {
446 reg = <1>;
447 fsl,pinmux-ids = <
448 MX28_PAD_ENET0_MDC__ENET0_MDC
449 MX28_PAD_ENET0_MDIO__ENET0_MDIO
450 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
451 MX28_PAD_ENET0_RXD0__ENET0_RXD0
452 MX28_PAD_ENET0_RXD1__ENET0_RXD1
453 MX28_PAD_ENET0_RXD2__ENET0_RXD2
454 MX28_PAD_ENET0_RXD3__ENET0_RXD3
455 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
456 MX28_PAD_ENET0_TXD0__ENET0_TXD0
457 MX28_PAD_ENET0_TXD1__ENET0_TXD1
458 MX28_PAD_ENET0_TXD2__ENET0_TXD2
459 MX28_PAD_ENET0_TXD3__ENET0_TXD3
460 MX28_PAD_ENET_CLK__CLKCTRL_ENET
461 MX28_PAD_ENET0_COL__ENET0_COL
462 MX28_PAD_ENET0_CRS__ENET0_CRS
463 MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
464 MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
465 >;
466 fsl,drive-strength = <MXS_DRIVE_8mA>;
467 fsl,voltage = <MXS_VOLTAGE_HIGH>;
468 fsl,pull-up = <MXS_PULL_ENABLE>;
469 };
470
471 mac1_pins_a: mac1@0 {
472 reg = <0>;
473 fsl,pinmux-ids = <
474 MX28_PAD_ENET0_CRS__ENET1_RX_EN
475 MX28_PAD_ENET0_RXD2__ENET1_RXD0
476 MX28_PAD_ENET0_RXD3__ENET1_RXD1
477 MX28_PAD_ENET0_COL__ENET1_TX_EN
478 MX28_PAD_ENET0_TXD2__ENET1_TXD0
479 MX28_PAD_ENET0_TXD3__ENET1_TXD1
480 >;
481 fsl,drive-strength = <MXS_DRIVE_8mA>;
482 fsl,voltage = <MXS_VOLTAGE_HIGH>;
483 fsl,pull-up = <MXS_PULL_ENABLE>;
484 };
485
486 mmc0_8bit_pins_a: mmc0-8bit@0 {
487 reg = <0>;
488 fsl,pinmux-ids = <
489 MX28_PAD_SSP0_DATA0__SSP0_D0
490 MX28_PAD_SSP0_DATA1__SSP0_D1
491 MX28_PAD_SSP0_DATA2__SSP0_D2
492 MX28_PAD_SSP0_DATA3__SSP0_D3
493 MX28_PAD_SSP0_DATA4__SSP0_D4
494 MX28_PAD_SSP0_DATA5__SSP0_D5
495 MX28_PAD_SSP0_DATA6__SSP0_D6
496 MX28_PAD_SSP0_DATA7__SSP0_D7
497 MX28_PAD_SSP0_CMD__SSP0_CMD
498 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
499 MX28_PAD_SSP0_SCK__SSP0_SCK
500 >;
501 fsl,drive-strength = <MXS_DRIVE_8mA>;
502 fsl,voltage = <MXS_VOLTAGE_HIGH>;
503 fsl,pull-up = <MXS_PULL_ENABLE>;
504 };
505
506 mmc0_4bit_pins_a: mmc0-4bit@0 {
507 reg = <0>;
508 fsl,pinmux-ids = <
509 MX28_PAD_SSP0_DATA0__SSP0_D0
510 MX28_PAD_SSP0_DATA1__SSP0_D1
511 MX28_PAD_SSP0_DATA2__SSP0_D2
512 MX28_PAD_SSP0_DATA3__SSP0_D3
513 MX28_PAD_SSP0_CMD__SSP0_CMD
514 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
515 MX28_PAD_SSP0_SCK__SSP0_SCK
516 >;
517 fsl,drive-strength = <MXS_DRIVE_8mA>;
518 fsl,voltage = <MXS_VOLTAGE_HIGH>;
519 fsl,pull-up = <MXS_PULL_ENABLE>;
520 };
521
522 mmc0_cd_cfg: mmc0-cd-cfg@0 {
523 reg = <0>;
524 fsl,pinmux-ids = <
525 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
526 >;
527 fsl,pull-up = <MXS_PULL_DISABLE>;
528 };
529
530 mmc0_sck_cfg: mmc0-sck-cfg@0 {
531 reg = <0>;
532 fsl,pinmux-ids = <
533 MX28_PAD_SSP0_SCK__SSP0_SCK
534 >;
535 fsl,drive-strength = <MXS_DRIVE_12mA>;
536 fsl,pull-up = <MXS_PULL_DISABLE>;
537 };
538
539 mmc1_4bit_pins_a: mmc1-4bit@0 {
540 reg = <0>;
541 fsl,pinmux-ids = <
542 MX28_PAD_GPMI_D00__SSP1_D0
543 MX28_PAD_GPMI_D01__SSP1_D1
544 MX28_PAD_GPMI_D02__SSP1_D2
545 MX28_PAD_GPMI_D03__SSP1_D3
546 MX28_PAD_GPMI_RDY1__SSP1_CMD
547 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
548 MX28_PAD_GPMI_WRN__SSP1_SCK
549 >;
550 fsl,drive-strength = <MXS_DRIVE_8mA>;
551 fsl,voltage = <MXS_VOLTAGE_HIGH>;
552 fsl,pull-up = <MXS_PULL_ENABLE>;
553 };
554
555 mmc1_cd_cfg: mmc1-cd-cfg@0 {
556 reg = <0>;
557 fsl,pinmux-ids = <
558 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
559 >;
560 fsl,pull-up = <MXS_PULL_DISABLE>;
561 };
562
563 mmc1_sck_cfg: mmc1-sck-cfg@0 {
564 reg = <0>;
565 fsl,pinmux-ids = <
566 MX28_PAD_GPMI_WRN__SSP1_SCK
567 >;
568 fsl,drive-strength = <MXS_DRIVE_12mA>;
569 fsl,pull-up = <MXS_PULL_DISABLE>;
570 };
571
572
573 mmc2_4bit_pins_a: mmc2-4bit@0 {
574 reg = <0>;
575 fsl,pinmux-ids = <
576 MX28_PAD_SSP0_DATA4__SSP2_D0
577 MX28_PAD_SSP1_SCK__SSP2_D1
578 MX28_PAD_SSP1_CMD__SSP2_D2
579 MX28_PAD_SSP0_DATA5__SSP2_D3
580 MX28_PAD_SSP0_DATA6__SSP2_CMD
581 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
582 MX28_PAD_SSP0_DATA7__SSP2_SCK
583 >;
584 fsl,drive-strength = <MXS_DRIVE_8mA>;
585 fsl,voltage = <MXS_VOLTAGE_HIGH>;
586 fsl,pull-up = <MXS_PULL_ENABLE>;
587 };
588
589 mmc2_4bit_pins_b: mmc2-4bit@1 {
590 reg = <1>;
591 fsl,pinmux-ids = <
592 MX28_PAD_SSP2_SCK__SSP2_SCK
593 MX28_PAD_SSP2_MOSI__SSP2_CMD
594 MX28_PAD_SSP2_MISO__SSP2_D0
595 MX28_PAD_SSP2_SS0__SSP2_D3
596 MX28_PAD_SSP2_SS1__SSP2_D1
597 MX28_PAD_SSP2_SS2__SSP2_D2
598 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
599 >;
600 fsl,drive-strength = <MXS_DRIVE_8mA>;
601 fsl,voltage = <MXS_VOLTAGE_HIGH>;
602 fsl,pull-up = <MXS_PULL_ENABLE>;
603 };
604
605 mmc2_cd_cfg: mmc2-cd-cfg@0 {
606 reg = <0>;
607 fsl,pinmux-ids = <
608 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
609 >;
610 fsl,pull-up = <MXS_PULL_DISABLE>;
611 };
612
613 mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
614 reg = <0>;
615 fsl,pinmux-ids = <
616 MX28_PAD_SSP0_DATA7__SSP2_SCK
617 >;
618 fsl,drive-strength = <MXS_DRIVE_12mA>;
619 fsl,pull-up = <MXS_PULL_DISABLE>;
620 };
621
622 mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
623 reg = <1>;
624 fsl,pinmux-ids = <
625 MX28_PAD_SSP2_SCK__SSP2_SCK
626 >;
627 fsl,drive-strength = <MXS_DRIVE_12mA>;
628 fsl,pull-up = <MXS_PULL_DISABLE>;
629 };
630
631 i2c0_pins_a: i2c0@0 {
632 reg = <0>;
633 fsl,pinmux-ids = <
634 MX28_PAD_I2C0_SCL__I2C0_SCL
635 MX28_PAD_I2C0_SDA__I2C0_SDA
636 >;
637 fsl,drive-strength = <MXS_DRIVE_8mA>;
638 fsl,voltage = <MXS_VOLTAGE_HIGH>;
639 fsl,pull-up = <MXS_PULL_ENABLE>;
640 };
641
642 i2c0_pins_b: i2c0@1 {
643 reg = <1>;
644 fsl,pinmux-ids = <
645 MX28_PAD_AUART0_RX__I2C0_SCL
646 MX28_PAD_AUART0_TX__I2C0_SDA
647 >;
648 fsl,drive-strength = <MXS_DRIVE_8mA>;
649 fsl,voltage = <MXS_VOLTAGE_HIGH>;
650 fsl,pull-up = <MXS_PULL_ENABLE>;
651 };
652
653 i2c1_pins_a: i2c1@0 {
654 reg = <0>;
655 fsl,pinmux-ids = <
656 MX28_PAD_PWM0__I2C1_SCL
657 MX28_PAD_PWM1__I2C1_SDA
658 >;
659 fsl,drive-strength = <MXS_DRIVE_8mA>;
660 fsl,voltage = <MXS_VOLTAGE_HIGH>;
661 fsl,pull-up = <MXS_PULL_ENABLE>;
662 };
663
664 i2c1_pins_b: i2c1@1 {
665 reg = <1>;
666 fsl,pinmux-ids = <
667 MX28_PAD_AUART2_CTS__I2C1_SCL
668 MX28_PAD_AUART2_RTS__I2C1_SDA
669 >;
670 fsl,drive-strength = <MXS_DRIVE_8mA>;
671 fsl,voltage = <MXS_VOLTAGE_HIGH>;
672 fsl,pull-up = <MXS_PULL_ENABLE>;
673 };
674
675 saif0_pins_a: saif0@0 {
676 reg = <0>;
677 fsl,pinmux-ids = <
678 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
679 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
680 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
681 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
682 >;
683 fsl,drive-strength = <MXS_DRIVE_12mA>;
684 fsl,voltage = <MXS_VOLTAGE_HIGH>;
685 fsl,pull-up = <MXS_PULL_ENABLE>;
686 };
687
688 saif0_pins_b: saif0@1 {
689 reg = <1>;
690 fsl,pinmux-ids = <
691 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
692 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
693 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
694 >;
695 fsl,drive-strength = <MXS_DRIVE_12mA>;
696 fsl,voltage = <MXS_VOLTAGE_HIGH>;
697 fsl,pull-up = <MXS_PULL_ENABLE>;
698 };
699
700 saif1_pins_a: saif1@0 {
701 reg = <0>;
702 fsl,pinmux-ids = <
703 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
704 >;
705 fsl,drive-strength = <MXS_DRIVE_12mA>;
706 fsl,voltage = <MXS_VOLTAGE_HIGH>;
707 fsl,pull-up = <MXS_PULL_ENABLE>;
708 };
709
710 pwm0_pins_a: pwm0@0 {
711 reg = <0>;
712 fsl,pinmux-ids = <
713 MX28_PAD_PWM0__PWM_0
714 >;
715 fsl,drive-strength = <MXS_DRIVE_4mA>;
716 fsl,voltage = <MXS_VOLTAGE_HIGH>;
717 fsl,pull-up = <MXS_PULL_DISABLE>;
718 };
719
720 pwm2_pins_a: pwm2@0 {
721 reg = <0>;
722 fsl,pinmux-ids = <
723 MX28_PAD_PWM2__PWM_2
724 >;
725 fsl,drive-strength = <MXS_DRIVE_4mA>;
726 fsl,voltage = <MXS_VOLTAGE_HIGH>;
727 fsl,pull-up = <MXS_PULL_DISABLE>;
728 };
729
730 pwm3_pins_a: pwm3@0 {
731 reg = <0>;
732 fsl,pinmux-ids = <
733 MX28_PAD_PWM3__PWM_3
734 >;
735 fsl,drive-strength = <MXS_DRIVE_4mA>;
736 fsl,voltage = <MXS_VOLTAGE_HIGH>;
737 fsl,pull-up = <MXS_PULL_DISABLE>;
738 };
739
740 pwm3_pins_b: pwm3@1 {
741 reg = <1>;
742 fsl,pinmux-ids = <
743 MX28_PAD_SAIF0_MCLK__PWM_3
744 >;
745 fsl,drive-strength = <MXS_DRIVE_4mA>;
746 fsl,voltage = <MXS_VOLTAGE_HIGH>;
747 fsl,pull-up = <MXS_PULL_DISABLE>;
748 };
749
750 pwm4_pins_a: pwm4@0 {
751 reg = <0>;
752 fsl,pinmux-ids = <
753 MX28_PAD_PWM4__PWM_4
754 >;
755 fsl,drive-strength = <MXS_DRIVE_4mA>;
756 fsl,voltage = <MXS_VOLTAGE_HIGH>;
757 fsl,pull-up = <MXS_PULL_DISABLE>;
758 };
759
760 lcdif_24bit_pins_a: lcdif-24bit@0 {
761 reg = <0>;
762 fsl,pinmux-ids = <
763 MX28_PAD_LCD_D00__LCD_D0
764 MX28_PAD_LCD_D01__LCD_D1
765 MX28_PAD_LCD_D02__LCD_D2
766 MX28_PAD_LCD_D03__LCD_D3
767 MX28_PAD_LCD_D04__LCD_D4
768 MX28_PAD_LCD_D05__LCD_D5
769 MX28_PAD_LCD_D06__LCD_D6
770 MX28_PAD_LCD_D07__LCD_D7
771 MX28_PAD_LCD_D08__LCD_D8
772 MX28_PAD_LCD_D09__LCD_D9
773 MX28_PAD_LCD_D10__LCD_D10
774 MX28_PAD_LCD_D11__LCD_D11
775 MX28_PAD_LCD_D12__LCD_D12
776 MX28_PAD_LCD_D13__LCD_D13
777 MX28_PAD_LCD_D14__LCD_D14
778 MX28_PAD_LCD_D15__LCD_D15
779 MX28_PAD_LCD_D16__LCD_D16
780 MX28_PAD_LCD_D17__LCD_D17
781 MX28_PAD_LCD_D18__LCD_D18
782 MX28_PAD_LCD_D19__LCD_D19
783 MX28_PAD_LCD_D20__LCD_D20
784 MX28_PAD_LCD_D21__LCD_D21
785 MX28_PAD_LCD_D22__LCD_D22
786 MX28_PAD_LCD_D23__LCD_D23
787 >;
788 fsl,drive-strength = <MXS_DRIVE_4mA>;
789 fsl,voltage = <MXS_VOLTAGE_HIGH>;
790 fsl,pull-up = <MXS_PULL_DISABLE>;
791 };
792
793 lcdif_18bit_pins_a: lcdif-18bit@0 {
794 reg = <0>;
795 fsl,pinmux-ids = <
796 MX28_PAD_LCD_D00__LCD_D0
797 MX28_PAD_LCD_D01__LCD_D1
798 MX28_PAD_LCD_D02__LCD_D2
799 MX28_PAD_LCD_D03__LCD_D3
800 MX28_PAD_LCD_D04__LCD_D4
801 MX28_PAD_LCD_D05__LCD_D5
802 MX28_PAD_LCD_D06__LCD_D6
803 MX28_PAD_LCD_D07__LCD_D7
804 MX28_PAD_LCD_D08__LCD_D8
805 MX28_PAD_LCD_D09__LCD_D9
806 MX28_PAD_LCD_D10__LCD_D10
807 MX28_PAD_LCD_D11__LCD_D11
808 MX28_PAD_LCD_D12__LCD_D12
809 MX28_PAD_LCD_D13__LCD_D13
810 MX28_PAD_LCD_D14__LCD_D14
811 MX28_PAD_LCD_D15__LCD_D15
812 MX28_PAD_LCD_D16__LCD_D16
813 MX28_PAD_LCD_D17__LCD_D17
814 >;
815 fsl,drive-strength = <MXS_DRIVE_4mA>;
816 fsl,voltage = <MXS_VOLTAGE_HIGH>;
817 fsl,pull-up = <MXS_PULL_DISABLE>;
818 };
819
820 lcdif_16bit_pins_a: lcdif-16bit@0 {
821 reg = <0>;
822 fsl,pinmux-ids = <
823 MX28_PAD_LCD_D00__LCD_D0
824 MX28_PAD_LCD_D01__LCD_D1
825 MX28_PAD_LCD_D02__LCD_D2
826 MX28_PAD_LCD_D03__LCD_D3
827 MX28_PAD_LCD_D04__LCD_D4
828 MX28_PAD_LCD_D05__LCD_D5
829 MX28_PAD_LCD_D06__LCD_D6
830 MX28_PAD_LCD_D07__LCD_D7
831 MX28_PAD_LCD_D08__LCD_D8
832 MX28_PAD_LCD_D09__LCD_D9
833 MX28_PAD_LCD_D10__LCD_D10
834 MX28_PAD_LCD_D11__LCD_D11
835 MX28_PAD_LCD_D12__LCD_D12
836 MX28_PAD_LCD_D13__LCD_D13
837 MX28_PAD_LCD_D14__LCD_D14
838 MX28_PAD_LCD_D15__LCD_D15
839 >;
840 fsl,drive-strength = <MXS_DRIVE_4mA>;
841 fsl,voltage = <MXS_VOLTAGE_HIGH>;
842 fsl,pull-up = <MXS_PULL_DISABLE>;
843 };
844
845 lcdif_sync_pins_a: lcdif-sync@0 {
846 reg = <0>;
847 fsl,pinmux-ids = <
848 MX28_PAD_LCD_RS__LCD_DOTCLK
849 MX28_PAD_LCD_CS__LCD_ENABLE
850 MX28_PAD_LCD_RD_E__LCD_VSYNC
851 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
852 >;
853 fsl,drive-strength = <MXS_DRIVE_4mA>;
854 fsl,voltage = <MXS_VOLTAGE_HIGH>;
855 fsl,pull-up = <MXS_PULL_DISABLE>;
856 };
857
858 can0_pins_a: can0@0 {
859 reg = <0>;
860 fsl,pinmux-ids = <
861 MX28_PAD_GPMI_RDY2__CAN0_TX
862 MX28_PAD_GPMI_RDY3__CAN0_RX
863 >;
864 fsl,drive-strength = <MXS_DRIVE_4mA>;
865 fsl,voltage = <MXS_VOLTAGE_HIGH>;
866 fsl,pull-up = <MXS_PULL_DISABLE>;
867 };
868
869 can1_pins_a: can1@0 {
870 reg = <0>;
871 fsl,pinmux-ids = <
872 MX28_PAD_GPMI_CE2N__CAN1_TX
873 MX28_PAD_GPMI_CE3N__CAN1_RX
874 >;
875 fsl,drive-strength = <MXS_DRIVE_4mA>;
876 fsl,voltage = <MXS_VOLTAGE_HIGH>;
877 fsl,pull-up = <MXS_PULL_DISABLE>;
878 };
879
880 spi2_pins_a: spi2@0 {
881 reg = <0>;
882 fsl,pinmux-ids = <
883 MX28_PAD_SSP2_SCK__SSP2_SCK
884 MX28_PAD_SSP2_MOSI__SSP2_CMD
885 MX28_PAD_SSP2_MISO__SSP2_D0
886 MX28_PAD_SSP2_SS0__SSP2_D3
887 >;
888 fsl,drive-strength = <MXS_DRIVE_8mA>;
889 fsl,voltage = <MXS_VOLTAGE_HIGH>;
890 fsl,pull-up = <MXS_PULL_ENABLE>;
891 };
892
893 spi3_pins_a: spi3@0 {
894 reg = <0>;
895 fsl,pinmux-ids = <
896 MX28_PAD_AUART2_RX__SSP3_D4
897 MX28_PAD_AUART2_TX__SSP3_D5
898 MX28_PAD_SSP3_SCK__SSP3_SCK
899 MX28_PAD_SSP3_MOSI__SSP3_CMD
900 MX28_PAD_SSP3_MISO__SSP3_D0
901 MX28_PAD_SSP3_SS0__SSP3_D3
902 >;
903 fsl,drive-strength = <MXS_DRIVE_8mA>;
904 fsl,voltage = <MXS_VOLTAGE_HIGH>;
905 fsl,pull-up = <MXS_PULL_DISABLE>;
906 };
907
908 spi3_pins_b: spi3@1 {
909 reg = <1>;
910 fsl,pinmux-ids = <
911 MX28_PAD_SSP3_SCK__SSP3_SCK
912 MX28_PAD_SSP3_MOSI__SSP3_CMD
913 MX28_PAD_SSP3_MISO__SSP3_D0
914 MX28_PAD_SSP3_SS0__SSP3_D3
915 >;
916 fsl,drive-strength = <MXS_DRIVE_8mA>;
917 fsl,voltage = <MXS_VOLTAGE_HIGH>;
918 fsl,pull-up = <MXS_PULL_ENABLE>;
919 };
920
921 usb0_pins_a: usb0@0 {
922 reg = <0>;
923 fsl,pinmux-ids = <
924 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
925 >;
926 fsl,drive-strength = <MXS_DRIVE_12mA>;
927 fsl,voltage = <MXS_VOLTAGE_HIGH>;
928 fsl,pull-up = <MXS_PULL_DISABLE>;
929 };
930
931 usb0_pins_b: usb0@1 {
932 reg = <1>;
933 fsl,pinmux-ids = <
934 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
935 >;
936 fsl,drive-strength = <MXS_DRIVE_12mA>;
937 fsl,voltage = <MXS_VOLTAGE_HIGH>;
938 fsl,pull-up = <MXS_PULL_DISABLE>;
939 };
940
941 usb1_pins_a: usb1@0 {
942 reg = <0>;
943 fsl,pinmux-ids = <
944 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
945 >;
946 fsl,drive-strength = <MXS_DRIVE_12mA>;
947 fsl,voltage = <MXS_VOLTAGE_HIGH>;
948 fsl,pull-up = <MXS_PULL_DISABLE>;
949 };
950
951 usb0_id_pins_a: usb0id@0 {
952 reg = <0>;
953 fsl,pinmux-ids = <
954 MX28_PAD_AUART1_RTS__USB0_ID
955 >;
956 fsl,drive-strength = <MXS_DRIVE_12mA>;
957 fsl,voltage = <MXS_VOLTAGE_HIGH>;
958 fsl,pull-up = <MXS_PULL_ENABLE>;
959 };
960
961 usb0_id_pins_b: usb0id1@0 {
962 reg = <0>;
963 fsl,pinmux-ids = <
964 MX28_PAD_PWM2__USB0_ID
965 >;
966 fsl,drive-strength = <MXS_DRIVE_12mA>;
967 fsl,voltage = <MXS_VOLTAGE_HIGH>;
968 fsl,pull-up = <MXS_PULL_ENABLE>;
969 };
970
971 };
972
973 digctl: digctl@8001c000 {
974 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
975 reg = <0x8001c000 0x2000>;
976 interrupts = <89>;
977 status = "disabled";
978 };
979
980 etm: etm@80022000 {
981 reg = <0x80022000 0x2000>;
982 status = "disabled";
983 };
984
985 dma_apbx: dma-apbx@80024000 {
986 compatible = "fsl,imx28-dma-apbx";
987 reg = <0x80024000 0x2000>;
988 interrupts = <78 79 66 0
989 80 81 68 69
990 70 71 72 73
991 74 75 76 77>;
992 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
993 "saif0", "saif1", "i2c0", "i2c1",
994 "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
995 "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
996 #dma-cells = <1>;
997 dma-channels = <16>;
998 clocks = <&clks 26>;
999 };
1000
1001 dcp: crypto@80028000 {
1002 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
1003 reg = <0x80028000 0x2000>;
1004 interrupts = <52 53 54>;
1005 status = "okay";
1006 };
1007
1008 pxp: pxp@8002a000 {
1009 reg = <0x8002a000 0x2000>;
1010 interrupts = <39>;
1011 status = "disabled";
1012 };
1013
1014 ocotp: efuse@8002c000 {
1015 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
1016 #address-cells = <1>;
1017 #size-cells = <1>;
1018 reg = <0x8002c000 0x2000>;
1019 clocks = <&clks 25>;
1020 };
1021
1022 axi-ahb@8002e000 {
1023 reg = <0x8002e000 0x2000>;
1024 status = "disabled";
1025 };
1026
1027 lcdif: lcdif@80030000 {
1028 compatible = "fsl,imx28-lcdif";
1029 reg = <0x80030000 0x2000>;
1030 interrupts = <38>;
1031 clocks = <&clks 55>;
1032 dmas = <&dma_apbh 13>;
1033 dma-names = "rx";
1034 status = "disabled";
1035 };
1036
1037 can0: can@80032000 {
1038 compatible = "fsl,imx28-flexcan";
1039 reg = <0x80032000 0x2000>;
1040 interrupts = <8>;
1041 clocks = <&clks 58>, <&clks 58>;
1042 clock-names = "ipg", "per";
1043 status = "disabled";
1044 };
1045
1046 can1: can@80034000 {
1047 compatible = "fsl,imx28-flexcan";
1048 reg = <0x80034000 0x2000>;
1049 interrupts = <9>;
1050 clocks = <&clks 59>, <&clks 59>;
1051 clock-names = "ipg", "per";
1052 status = "disabled";
1053 };
1054
1055 simdbg: simdbg@8003c000 {
1056 reg = <0x8003c000 0x200>;
1057 status = "disabled";
1058 };
1059
1060 simgpmisel: simgpmisel@8003c200 {
1061 reg = <0x8003c200 0x100>;
1062 status = "disabled";
1063 };
1064
1065 simsspsel: simsspsel@8003c300 {
1066 reg = <0x8003c300 0x100>;
1067 status = "disabled";
1068 };
1069
1070 simmemsel: simmemsel@8003c400 {
1071 reg = <0x8003c400 0x100>;
1072 status = "disabled";
1073 };
1074
1075 gpiomon: gpiomon@8003c500 {
1076 reg = <0x8003c500 0x100>;
1077 status = "disabled";
1078 };
1079
1080 simenet: simenet@8003c700 {
1081 reg = <0x8003c700 0x100>;
1082 status = "disabled";
1083 };
1084
1085 armjtag: armjtag@8003c800 {
1086 reg = <0x8003c800 0x100>;
1087 status = "disabled";
1088 };
1089 };
1090
1091 apbx@80040000 {
1092 compatible = "simple-bus";
1093 #address-cells = <1>;
1094 #size-cells = <1>;
1095 reg = <0x80040000 0x40000>;
1096 ranges;
1097
1098 clks: clkctrl@80040000 {
1099 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1100 reg = <0x80040000 0x2000>;
1101 #clock-cells = <1>;
1102 };
1103
1104 saif0: saif@80042000 {
1105 #sound-dai-cells = <0>;
1106 compatible = "fsl,imx28-saif";
1107 reg = <0x80042000 0x2000>;
1108 interrupts = <59>;
1109 #clock-cells = <0>;
1110 clocks = <&clks 53>;
1111 dmas = <&dma_apbx 4>;
1112 dma-names = "rx-tx";
1113 status = "disabled";
1114 };
1115
1116 power: power@80044000 {
1117 reg = <0x80044000 0x2000>;
1118 status = "disabled";
1119 };
1120
1121 saif1: saif@80046000 {
1122 #sound-dai-cells = <0>;
1123 compatible = "fsl,imx28-saif";
1124 reg = <0x80046000 0x2000>;
1125 interrupts = <58>;
1126 clocks = <&clks 54>;
1127 dmas = <&dma_apbx 5>;
1128 dma-names = "rx-tx";
1129 status = "disabled";
1130 };
1131
1132 lradc: lradc@80050000 {
1133 compatible = "fsl,imx28-lradc";
1134 reg = <0x80050000 0x2000>;
1135 interrupts = <10 14 15 16 17 18 19
1136 20 21 22 23 24 25>;
1137 status = "disabled";
1138 clocks = <&clks 41>;
1139 #io-channel-cells = <1>;
1140 };
1141
1142 spdif: spdif@80054000 {
1143 reg = <0x80054000 0x2000>;
1144 interrupts = <45>;
1145 dmas = <&dma_apbx 2>;
1146 dma-names = "tx";
1147 status = "disabled";
1148 };
1149
1150 mxs_rtc: rtc@80056000 {
1151 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1152 reg = <0x80056000 0x2000>;
1153 interrupts = <29>;
1154 };
1155
1156 i2c0: i2c@80058000 {
1157 #address-cells = <1>;
1158 #size-cells = <0>;
1159 compatible = "fsl,imx28-i2c";
1160 reg = <0x80058000 0x2000>;
1161 interrupts = <111>;
1162 clock-frequency = <100000>;
1163 dmas = <&dma_apbx 6>;
1164 dma-names = "rx-tx";
1165 status = "disabled";
1166 };
1167
1168 i2c1: i2c@8005a000 {
1169 #address-cells = <1>;
1170 #size-cells = <0>;
1171 compatible = "fsl,imx28-i2c";
1172 reg = <0x8005a000 0x2000>;
1173 interrupts = <110>;
1174 clock-frequency = <100000>;
1175 dmas = <&dma_apbx 7>;
1176 dma-names = "rx-tx";
1177 status = "disabled";
1178 };
1179
1180 pwm: pwm@80064000 {
1181 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1182 reg = <0x80064000 0x2000>;
1183 clocks = <&clks 44>;
1184 #pwm-cells = <2>;
1185 fsl,pwm-number = <8>;
1186 status = "disabled";
1187 };
1188
1189 timer: timrot@80068000 {
1190 compatible = "fsl,imx28-timrot", "fsl,timrot";
1191 reg = <0x80068000 0x2000>;
1192 interrupts = <48 49 50 51>;
1193 clocks = <&clks 26>;
1194 };
1195
1196 auart0: serial@8006a000 {
1197 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1198 reg = <0x8006a000 0x2000>;
1199 interrupts = <112>;
1200 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1201 dma-names = "rx", "tx";
1202 clocks = <&clks 45>;
1203 status = "disabled";
1204 };
1205
1206 auart1: serial@8006c000 {
1207 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1208 reg = <0x8006c000 0x2000>;
1209 interrupts = <113>;
1210 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1211 dma-names = "rx", "tx";
1212 clocks = <&clks 45>;
1213 status = "disabled";
1214 };
1215
1216 auart2: serial@8006e000 {
1217 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1218 reg = <0x8006e000 0x2000>;
1219 interrupts = <114>;
1220 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1221 dma-names = "rx", "tx";
1222 clocks = <&clks 45>;
1223 status = "disabled";
1224 };
1225
1226 auart3: serial@80070000 {
1227 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1228 reg = <0x80070000 0x2000>;
1229 interrupts = <115>;
1230 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1231 dma-names = "rx", "tx";
1232 clocks = <&clks 45>;
1233 status = "disabled";
1234 };
1235
1236 auart4: serial@80072000 {
1237 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1238 reg = <0x80072000 0x2000>;
1239 interrupts = <116>;
1240 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1241 dma-names = "rx", "tx";
1242 clocks = <&clks 45>;
1243 status = "disabled";
1244 };
1245
1246 duart: serial@80074000 {
1247 compatible = "arm,pl011", "arm,primecell";
1248 reg = <0x80074000 0x1000>;
1249 interrupts = <47>;
1250 clocks = <&clks 45>, <&clks 26>;
1251 clock-names = "uart", "apb_pclk";
1252 status = "disabled";
1253 };
1254
1255 usbphy0: usbphy@8007c000 {
1256 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1257 reg = <0x8007c000 0x2000>;
1258 clocks = <&clks 62>;
1259 status = "disabled";
1260 };
1261
1262 usbphy1: usbphy@8007e000 {
1263 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1264 reg = <0x8007e000 0x2000>;
1265 clocks = <&clks 63>;
1266 status = "disabled";
1267 };
1268 };
1269 };
1270
1271 ahb@80080000 {
1272 compatible = "simple-bus";
1273 #address-cells = <1>;
1274 #size-cells = <1>;
1275 reg = <0x80080000 0x80000>;
1276 ranges;
1277
1278 usb0: usb@80080000 {
1279 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1280 reg = <0x80080000 0x10000>;
1281 interrupts = <93>;
1282 clocks = <&clks 60>;
1283 fsl,usbphy = <&usbphy0>;
1284 status = "disabled";
1285 };
1286
1287 usb1: usb@80090000 {
1288 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1289 reg = <0x80090000 0x10000>;
1290 interrupts = <92>;
1291 clocks = <&clks 61>;
1292 fsl,usbphy = <&usbphy1>;
1293 dr_mode = "host";
1294 status = "disabled";
1295 };
1296
1297 dflpt: dflpt@800c0000 {
1298 reg = <0x800c0000 0x10000>;
1299 status = "disabled";
1300 };
1301
1302 mac0: ethernet@800f0000 {
1303 compatible = "fsl,imx28-fec";
1304 reg = <0x800f0000 0x4000>;
1305 interrupts = <101>;
1306 clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1307 clock-names = "ipg", "ahb", "enet_out";
1308 status = "disabled";
1309 };
1310
1311 mac1: ethernet@800f4000 {
1312 compatible = "fsl,imx28-fec";
1313 reg = <0x800f4000 0x4000>;
1314 interrupts = <102>;
1315 clocks = <&clks 57>, <&clks 57>;
1316 clock-names = "ipg", "ahb";
1317 status = "disabled";
1318 };
1319
1320 etn_switch: switch@800f8000 {
1321 reg = <0x800f8000 0x8000>;
1322 status = "disabled";
1323 };
1324 };
1325
1326 iio-hwmon {
1327 compatible = "iio-hwmon";
1328 io-channels = <&lradc 8>;
1329 };
1330};