Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos4412 based Galaxy S3 board device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 */
8
9/dts-v1/;
10#include <dt-bindings/leds/common.h>
11#include "exynos4412-midas.dtsi"
12
13/ {
14 aliases {
15 i2c9 = &i2c_ak8975;
16 i2c10 = &i2c_cm36651;
17 };
18
19 led-controller {
20 compatible = "skyworks,aat1290";
21 flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
22 enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
23
24 pinctrl-names = "default", "host", "isp";
25 pinctrl-0 = <&camera_flash_host>;
26 pinctrl-1 = <&camera_flash_host>;
27 pinctrl-2 = <&camera_flash_isp>;
28
29 led {
30 function = LED_FUNCTION_FLASH;
31 color = <LED_COLOR_ID_WHITE>;
32 led-max-microamp = <520833>;
33 flash-max-microamp = <1012500>;
34 flash-max-timeout-us = <1940000>;
35 };
36 };
37
38 lcd_vdd3_reg: voltage-regulator-10 {
39 compatible = "regulator-fixed";
40 regulator-name = "LCD_VDD_2.2V";
41 regulator-min-microvolt = <2200000>;
42 regulator-max-microvolt = <2200000>;
43 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
44 enable-active-high;
45 };
46
47 ps_als_reg: voltage-regulator-11 {
48 compatible = "regulator-fixed";
49 regulator-name = "LED_A_3.0V";
50 regulator-min-microvolt = <3000000>;
51 regulator-max-microvolt = <3000000>;
52 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
53 enable-active-high;
54 };
55
56 i2c_ak8975: i2c-gpio-0 {
57 compatible = "i2c-gpio";
58 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
59 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
60 i2c-gpio,delay-us = <2>;
61 #address-cells = <1>;
62 #size-cells = <0>;
63
64 magnetometer@c {
65 compatible = "asahi-kasei,ak8975";
66 reg = <0x0c>;
67 gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
68 };
69 };
70
71 i2c_cm36651: i2c-gpio-2 {
72 compatible = "i2c-gpio";
73 sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
74 scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
75 i2c-gpio,delay-us = <2>;
76 #address-cells = <1>;
77 #size-cells = <0>;
78
79 light-sensor@18 {
80 compatible = "capella,cm36651";
81 reg = <0x18>;
82 interrupt-parent = <&gpx0>;
83 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
84 vled-supply = <&ps_als_reg>;
85 };
86 };
87};
88
89&buck9_reg {
90 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
91};
92
93&cam_af_reg {
94 gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
95 status = "okay";
96};
97
98&cam_io_reg {
99 gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
100 status = "okay";
101};
102
103&dsi_0 {
104 status = "okay";
105
106 panel@0 {
107 compatible = "samsung,s6e8aa0";
108 reg = <0>;
109 vdd3-supply = <&lcd_vdd3_reg>;
110 vci-supply = <&ldo25_reg>;
111 reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
112 power-on-delay = <50>;
113 reset-delay = <100>;
114 init-delay = <100>;
115 flip-horizontal;
116 flip-vertical;
117 panel-width-mm = <58>;
118 panel-height-mm = <103>;
119
120 display-timings {
121 timing-0 {
122 clock-frequency = <57153600>;
123 hactive = <720>;
124 vactive = <1280>;
125 hfront-porch = <5>;
126 hback-porch = <5>;
127 hsync-len = <5>;
128 vfront-porch = <13>;
129 vback-porch = <1>;
130 vsync-len = <2>;
131 };
132 };
133 };
134};
135
136&i2c_3 {
137 touchscreen@48 {
138 compatible = "melfas,mms114";
139 reg = <0x48>;
140 interrupt-parent = <&gpm2>;
141 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
142 touchscreen-size-x = <720>;
143 touchscreen-size-y = <1280>;
144 avdd-supply = <&ldo23_reg>;
145 vdd-supply = <&ldo24_reg>;
146 };
147};
148
149&ldo25_reg {
150 regulator-name = "LCD_VCC_3.3V";
151 regulator-min-microvolt = <2800000>;
152 regulator-max-microvolt = <2800000>;
153};
154
155&pinctrl_0 {
156 camera_flash_host: camera-flash-host-pins {
157 samsung,pins = "gpj1-0";
158 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
159 samsung,pin-val = <0>;
160 };
161
162 camera_flash_isp: camera-flash-isp-pins {
163 samsung,pins = "gpj1-0";
164 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
165 samsung,pin-val = <1>;
166 };
167};
168
169&s5c73m3 {
170 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
171 vdda-supply = <&ldo17_reg>;
172 status = "okay";
173};
174
175&sound {
176 samsung,audio-routing =
177 "HP", "HPOUT1L",
178 "HP", "HPOUT1R",
179
180 "SPK", "SPKOUTLN",
181 "SPK", "SPKOUTLP",
182 "SPK", "SPKOUTRN",
183 "SPK", "SPKOUTRP",
184
185 "RCV", "HPOUT2N",
186 "RCV", "HPOUT2P",
187
188 "HDMI", "LINEOUT1N",
189 "HDMI", "LINEOUT1P",
190
191 "LINE", "LINEOUT2N",
192 "LINE", "LINEOUT2P",
193
194 "IN1LP", "MICBIAS1",
195 "IN1LN", "MICBIAS1",
196 "Main Mic", "MICBIAS1",
197
198 "IN1RP", "Sub Mic",
199 "IN1RN", "Sub Mic",
200
201 "IN2LP:VXRN", "MICBIAS2",
202 "Headset Mic", "MICBIAS2",
203
204 "IN2RN", "FM In",
205 "IN2RP:VXRP", "FM In";
206};
207
208&submic_bias_reg {
209 gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
210 enable-active-high;
211};
212
213&touchkey_reg {
214 gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
215 status = "okay";
216};
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos4412 based Galaxy S3 board device tree source
4 *
5 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
6 * http://www.samsung.com
7 */
8
9/dts-v1/;
10#include "exynos4412-midas.dtsi"
11
12/ {
13 aliases {
14 i2c9 = &i2c_ak8975;
15 i2c10 = &i2c_cm36651;
16 };
17
18 aat1290 {
19 compatible = "skyworks,aat1290";
20 flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
21 enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
22
23 pinctrl-names = "default", "host", "isp";
24 pinctrl-0 = <&camera_flash_host>;
25 pinctrl-1 = <&camera_flash_host>;
26 pinctrl-2 = <&camera_flash_isp>;
27
28 flash-led {
29 label = "flash";
30 led-max-microamp = <520833>;
31 flash-max-microamp = <1012500>;
32 flash-max-timeout-us = <1940000>;
33 };
34 };
35
36 lcd_vdd3_reg: voltage-regulator-7 {
37 compatible = "regulator-fixed";
38 regulator-name = "LCD_VDD_2.2V";
39 regulator-min-microvolt = <2200000>;
40 regulator-max-microvolt = <2200000>;
41 gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
42 enable-active-high;
43 };
44
45 ps_als_reg: voltage-regulator-8 {
46 compatible = "regulator-fixed";
47 regulator-name = "LED_A_3.0V";
48 regulator-min-microvolt = <3000000>;
49 regulator-max-microvolt = <3000000>;
50 gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
51 enable-active-high;
52 };
53
54 i2c_ak8975: i2c-gpio-0 {
55 compatible = "i2c-gpio";
56 sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
57 scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
58 i2c-gpio,delay-us = <2>;
59 #address-cells = <1>;
60 #size-cells = <0>;
61 status = "okay";
62
63 ak8975@c {
64 compatible = "asahi-kasei,ak8975";
65 reg = <0x0c>;
66 gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
67 };
68 };
69
70 i2c_cm36651: i2c-gpio-2 {
71 compatible = "i2c-gpio";
72 sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
73 scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
74 i2c-gpio,delay-us = <2>;
75 #address-cells = <1>;
76 #size-cells = <0>;
77
78 cm36651@18 {
79 compatible = "capella,cm36651";
80 reg = <0x18>;
81 interrupt-parent = <&gpx0>;
82 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
83 vled-supply = <&ps_als_reg>;
84 };
85 };
86};
87
88&buck9_reg {
89 maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
90};
91
92&cam_af_reg {
93 gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
94 status = "okay";
95};
96
97&cam_io_reg {
98 gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
99 status = "okay";
100};
101
102&dsi_0 {
103 status = "okay";
104
105 panel@0 {
106 compatible = "samsung,s6e8aa0";
107 reg = <0>;
108 vdd3-supply = <&lcd_vdd3_reg>;
109 vci-supply = <&ldo25_reg>;
110 reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
111 power-on-delay= <50>;
112 reset-delay = <100>;
113 init-delay = <100>;
114 flip-horizontal;
115 flip-vertical;
116 panel-width-mm = <58>;
117 panel-height-mm = <103>;
118
119 display-timings {
120 timing-0 {
121 clock-frequency = <57153600>;
122 hactive = <720>;
123 vactive = <1280>;
124 hfront-porch = <5>;
125 hback-porch = <5>;
126 hsync-len = <5>;
127 vfront-porch = <13>;
128 vback-porch = <1>;
129 vsync-len = <2>;
130 };
131 };
132 };
133};
134
135&i2c_3 {
136 mms114-touchscreen@48 {
137 compatible = "melfas,mms114";
138 reg = <0x48>;
139 interrupt-parent = <&gpm2>;
140 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
141 touchscreen-size-x = <720>;
142 touchscreen-size-y = <1280>;
143 avdd-supply = <&ldo23_reg>;
144 vdd-supply = <&ldo24_reg>;
145 };
146};
147
148&ldo25_reg {
149 regulator-name = "LCD_VCC_3.3V";
150 regulator-min-microvolt = <2800000>;
151 regulator-max-microvolt = <2800000>;
152};
153
154&pinctrl_0 {
155 camera_flash_host: camera-flash-host {
156 samsung,pins = "gpj1-0";
157 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
158 samsung,pin-val = <0>;
159 };
160
161 camera_flash_isp: camera-flash-isp {
162 samsung,pins = "gpj1-0";
163 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
164 samsung,pin-val = <1>;
165 };
166};
167
168&s5c73m3 {
169 standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
170 vdda-supply = <&ldo17_reg>;
171 status = "okay";
172};
173
174&touchkey_reg {
175 gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
176 status = "okay";
177};