Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Marvell Armada 38x family of SoCs.
4 *
5 * Copyright (C) 2014 Marvell
6 *
7 * Lior Amsalem <alior@marvell.com>
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 */
11
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include <dt-bindings/interrupt-controller/irq.h>
14
15#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
16
17/ {
18 #address-cells = <1>;
19 #size-cells = <1>;
20
21 model = "Marvell Armada 38x family SoC";
22 compatible = "marvell,armada380";
23
24 aliases {
25 gpio0 = &gpio0;
26 gpio1 = &gpio1;
27 serial0 = &uart0;
28 serial1 = &uart1;
29 };
30
31 pmu {
32 compatible = "arm,cortex-a9-pmu";
33 interrupts-extended = <&mpic 3>;
34 };
35
36 soc {
37 compatible = "marvell,armada380-mbus", "simple-bus";
38 #address-cells = <2>;
39 #size-cells = <1>;
40 controller = <&mbusc>;
41 interrupt-parent = <&gic>;
42 pcie-mem-aperture = <0xe0000000 0x8000000>;
43 pcie-io-aperture = <0xe8000000 0x100000>;
44
45 bootrom {
46 compatible = "marvell,bootrom";
47 reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
48 };
49
50 devbus_bootcs: devbus-bootcs {
51 compatible = "marvell,mvebu-devbus";
52 reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
53 ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
54 #address-cells = <1>;
55 #size-cells = <1>;
56 clocks = <&coreclk 0>;
57 status = "disabled";
58 };
59
60 devbus_cs0: devbus-cs0 {
61 compatible = "marvell,mvebu-devbus";
62 reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
63 ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
64 #address-cells = <1>;
65 #size-cells = <1>;
66 clocks = <&coreclk 0>;
67 status = "disabled";
68 };
69
70 devbus_cs1: devbus-cs1 {
71 compatible = "marvell,mvebu-devbus";
72 reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
73 ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
74 #address-cells = <1>;
75 #size-cells = <1>;
76 clocks = <&coreclk 0>;
77 status = "disabled";
78 };
79
80 devbus_cs2: devbus-cs2 {
81 compatible = "marvell,mvebu-devbus";
82 reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
83 ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
84 #address-cells = <1>;
85 #size-cells = <1>;
86 clocks = <&coreclk 0>;
87 status = "disabled";
88 };
89
90 devbus_cs3: devbus-cs3 {
91 compatible = "marvell,mvebu-devbus";
92 reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
93 ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
94 #address-cells = <1>;
95 #size-cells = <1>;
96 clocks = <&coreclk 0>;
97 status = "disabled";
98 };
99
100 internal-regs {
101 compatible = "simple-bus";
102 #address-cells = <1>;
103 #size-cells = <1>;
104 ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
105
106 sdramc: sdramc@1400 {
107 compatible = "marvell,armada-xp-sdram-controller";
108 reg = <0x1400 0x500>;
109 };
110
111 L2: cache-controller@8000 {
112 compatible = "arm,pl310-cache";
113 reg = <0x8000 0x1000>;
114 cache-unified;
115 cache-level = <2>;
116 arm,double-linefill-incr = <0>;
117 arm,double-linefill-wrap = <0>;
118 arm,double-linefill = <0>;
119 prefetch-data = <1>;
120 };
121
122 scu@c000 {
123 compatible = "arm,cortex-a9-scu";
124 reg = <0xc000 0x58>;
125 };
126
127 timer@c200 {
128 compatible = "arm,cortex-a9-global-timer";
129 reg = <0xc200 0x20>;
130 interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
131 clocks = <&coreclk 2>;
132 };
133
134 timer@c600 {
135 compatible = "arm,cortex-a9-twd-timer";
136 reg = <0xc600 0x20>;
137 interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
138 clocks = <&coreclk 2>;
139 };
140
141 gic: interrupt-controller@d000 {
142 compatible = "arm,cortex-a9-gic";
143 #interrupt-cells = <3>;
144 #size-cells = <0>;
145 interrupt-controller;
146 reg = <0xd000 0x1000>,
147 <0xc100 0x100>;
148 };
149
150 i2c0: i2c@11000 {
151 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
152 reg = <0x11000 0x20>;
153 #address-cells = <1>;
154 #size-cells = <0>;
155 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
156 clocks = <&coreclk 0>;
157 status = "disabled";
158 };
159
160 i2c1: i2c@11100 {
161 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
162 reg = <0x11100 0x20>;
163 #address-cells = <1>;
164 #size-cells = <0>;
165 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
166 clocks = <&coreclk 0>;
167 status = "disabled";
168 };
169
170 uart0: serial@12000 {
171 compatible = "marvell,armada-38x-uart", "ns16550a";
172 reg = <0x12000 0x100>;
173 reg-shift = <2>;
174 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
175 reg-io-width = <1>;
176 clocks = <&coreclk 0>;
177 status = "disabled";
178 };
179
180 uart1: serial@12100 {
181 compatible = "marvell,armada-38x-uart", "ns16550a";
182 reg = <0x12100 0x100>;
183 reg-shift = <2>;
184 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
185 reg-io-width = <1>;
186 clocks = <&coreclk 0>;
187 status = "disabled";
188 };
189
190 pinctrl: pinctrl@18000 {
191 reg = <0x18000 0x20>;
192
193 ge0_rgmii_pins: ge-rgmii-pins-0 {
194 marvell,pins = "mpp6", "mpp7", "mpp8",
195 "mpp9", "mpp10", "mpp11",
196 "mpp12", "mpp13", "mpp14",
197 "mpp15", "mpp16", "mpp17";
198 marvell,function = "ge0";
199 };
200
201 ge1_rgmii_pins: ge-rgmii-pins-1 {
202 marvell,pins = "mpp21", "mpp27", "mpp28",
203 "mpp29", "mpp30", "mpp31",
204 "mpp32", "mpp37", "mpp38",
205 "mpp39", "mpp40", "mpp41";
206 marvell,function = "ge1";
207 };
208
209 i2c0_pins: i2c-pins-0 {
210 marvell,pins = "mpp2", "mpp3";
211 marvell,function = "i2c0";
212 };
213
214 mdio_pins: mdio-pins {
215 marvell,pins = "mpp4", "mpp5";
216 marvell,function = "ge";
217 };
218
219 ref_clk0_pins: ref-clk-pins-0 {
220 marvell,pins = "mpp45";
221 marvell,function = "ref";
222 };
223
224 ref_clk1_pins: ref-clk-pins-1 {
225 marvell,pins = "mpp46";
226 marvell,function = "ref";
227 };
228
229 spi0_pins: spi-pins-0 {
230 marvell,pins = "mpp22", "mpp23", "mpp24",
231 "mpp25";
232 marvell,function = "spi0";
233 };
234
235 spi1_pins: spi-pins-1 {
236 marvell,pins = "mpp56", "mpp57", "mpp58",
237 "mpp59";
238 marvell,function = "spi1";
239 };
240
241 nand_pins: nand-pins {
242 marvell,pins = "mpp22", "mpp34", "mpp23",
243 "mpp33", "mpp38", "mpp28",
244 "mpp40", "mpp42", "mpp35",
245 "mpp36", "mpp25", "mpp30",
246 "mpp32";
247 marvell,function = "dev";
248 };
249
250 nand_rb: nand-rb {
251 marvell,pins = "mpp41";
252 marvell,function = "nand";
253 };
254
255 uart0_pins: uart-pins-0 {
256 marvell,pins = "mpp0", "mpp1";
257 marvell,function = "ua0";
258 };
259
260 uart1_pins: uart-pins-1 {
261 marvell,pins = "mpp19", "mpp20";
262 marvell,function = "ua1";
263 };
264
265 sdhci_pins: sdhci-pins {
266 marvell,pins = "mpp48", "mpp49", "mpp50",
267 "mpp52", "mpp53", "mpp54",
268 "mpp55", "mpp57", "mpp58",
269 "mpp59";
270 marvell,function = "sd0";
271 };
272
273 sata0_pins: sata-pins-0 {
274 marvell,pins = "mpp20";
275 marvell,function = "sata0";
276 };
277
278 sata1_pins: sata-pins-1 {
279 marvell,pins = "mpp19";
280 marvell,function = "sata1";
281 };
282
283 sata2_pins: sata-pins-2 {
284 marvell,pins = "mpp47";
285 marvell,function = "sata2";
286 };
287
288 sata3_pins: sata-pins-3 {
289 marvell,pins = "mpp44";
290 marvell,function = "sata3";
291 };
292
293 i2s_pins: i2s-pins {
294 marvell,pins = "mpp48", "mpp49",
295 "mpp50", "mpp51",
296 "mpp52", "mpp53";
297 marvell,function = "audio";
298 };
299
300 spdif_pins: spdif-pins {
301 marvell,pins = "mpp51";
302 marvell,function = "audio";
303 };
304 };
305
306 gpio0: gpio@18100 {
307 compatible = "marvell,armada-370-gpio",
308 "marvell,orion-gpio";
309 reg = <0x18100 0x40>, <0x181c0 0x08>;
310 reg-names = "gpio", "pwm";
311 ngpios = <32>;
312 gpio-controller;
313 gpio-ranges = <&pinctrl 0 0 32>;
314 #gpio-cells = <2>;
315 #pwm-cells = <2>;
316 interrupt-controller;
317 #interrupt-cells = <2>;
318 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
319 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
320 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
321 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
322 clocks = <&coreclk 0>;
323 };
324
325 gpio1: gpio@18140 {
326 compatible = "marvell,armada-370-gpio",
327 "marvell,orion-gpio";
328 reg = <0x18140 0x40>, <0x181c8 0x08>;
329 reg-names = "gpio", "pwm";
330 ngpios = <28>;
331 gpio-controller;
332 gpio-ranges = <&pinctrl 0 32 28>;
333 #gpio-cells = <2>;
334 #pwm-cells = <2>;
335 interrupt-controller;
336 #interrupt-cells = <2>;
337 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
338 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
339 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
340 <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
341 clocks = <&coreclk 0>;
342 };
343
344 systemc: system-controller@18200 {
345 compatible = "marvell,armada-380-system-controller",
346 "marvell,armada-370-xp-system-controller";
347 reg = <0x18200 0x100>;
348 };
349
350 gateclk: clock-gating-control@18220 {
351 compatible = "marvell,armada-380-gating-clock";
352 reg = <0x18220 0x4>;
353 clocks = <&coreclk 0>;
354 #clock-cells = <1>;
355 };
356
357 comphy: phy@18300 {
358 compatible = "marvell,armada-380-comphy";
359 reg-names = "comphy", "conf";
360 reg = <0x18300 0x100>, <0x18460 4>;
361 #address-cells = <1>;
362 #size-cells = <0>;
363
364 comphy0: phy@0 {
365 reg = <0>;
366 #phy-cells = <1>;
367 };
368
369 comphy1: phy@1 {
370 reg = <1>;
371 #phy-cells = <1>;
372 };
373
374 comphy2: phy@2 {
375 reg = <2>;
376 #phy-cells = <1>;
377 };
378
379 comphy3: phy@3 {
380 reg = <3>;
381 #phy-cells = <1>;
382 };
383
384 comphy4: phy@4 {
385 reg = <4>;
386 #phy-cells = <1>;
387 };
388
389 comphy5: phy@5 {
390 reg = <5>;
391 #phy-cells = <1>;
392 };
393 };
394
395 coreclk: mvebu-sar@18600 {
396 compatible = "marvell,armada-380-core-clock";
397 reg = <0x18600 0x04>;
398 #clock-cells = <1>;
399 };
400
401 mbusc: mbus-controller@20000 {
402 compatible = "marvell,mbus-controller";
403 reg = <0x20000 0x100>, <0x20180 0x20>,
404 <0x20250 0x8>;
405 };
406
407 mpic: interrupt-controller@20a00 {
408 compatible = "marvell,mpic";
409 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
410 #interrupt-cells = <1>;
411 #size-cells = <1>;
412 interrupt-controller;
413 msi-controller;
414 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
415 };
416
417 timer: timer@20300 {
418 compatible = "marvell,armada-380-timer",
419 "marvell,armada-xp-timer";
420 reg = <0x20300 0x30>, <0x21040 0x30>;
421 interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
422 <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
423 <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
424 <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
425 <&mpic 5>,
426 <&mpic 6>;
427 clocks = <&coreclk 2>, <&refclk>;
428 clock-names = "nbclk", "fixed";
429 };
430
431 watchdog: watchdog@20300 {
432 compatible = "marvell,armada-380-wdt";
433 reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
434 clocks = <&coreclk 2>, <&refclk>;
435 clock-names = "nbclk", "fixed";
436 interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
437 <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
438 };
439
440 cpurst: cpurst@20800 {
441 compatible = "marvell,armada-370-cpu-reset";
442 reg = <0x20800 0x10>;
443 };
444
445 mpcore-soc-ctrl@20d20 {
446 compatible = "marvell,armada-380-mpcore-soc-ctrl";
447 reg = <0x20d20 0x6c>;
448 };
449
450 coherencyfab: coherency-fabric@21010 {
451 compatible = "marvell,armada-380-coherency-fabric";
452 reg = <0x21010 0x1c>;
453 };
454
455 pmsu: pmsu@22000 {
456 compatible = "marvell,armada-380-pmsu";
457 reg = <0x22000 0x1000>;
458 };
459
460 /*
461 * As a special exception to the "order by
462 * register address" rule, the eth0 node is
463 * placed here to ensure that it gets
464 * registered as the first interface, since
465 * the network subsystem doesn't allow naming
466 * interfaces using DT aliases. Without this,
467 * the ordering of interfaces is different
468 * from the one used in U-Boot and the
469 * labeling of interfaces on the boards, which
470 * is very confusing for users.
471 */
472 eth0: ethernet@70000 {
473 compatible = "marvell,armada-370-neta";
474 reg = <0x70000 0x4000>;
475 interrupts-extended = <&mpic 8>;
476 clocks = <&gateclk 4>;
477 tx-csum-limit = <9800>;
478 status = "disabled";
479 };
480
481 eth1: ethernet@30000 {
482 compatible = "marvell,armada-370-neta";
483 reg = <0x30000 0x4000>;
484 interrupts-extended = <&mpic 10>;
485 clocks = <&gateclk 3>;
486 status = "disabled";
487 };
488
489 eth2: ethernet@34000 {
490 compatible = "marvell,armada-370-neta";
491 reg = <0x34000 0x4000>;
492 interrupts-extended = <&mpic 12>;
493 clocks = <&gateclk 2>;
494 status = "disabled";
495 };
496
497 usb0: usb@58000 {
498 compatible = "marvell,orion-ehci";
499 reg = <0x58000 0x500>;
500 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
501 clocks = <&gateclk 18>;
502 status = "disabled";
503 };
504
505 xor0: xor@60800 {
506 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
507 reg = <0x60800 0x100
508 0x60a00 0x100>;
509 clocks = <&gateclk 22>;
510 status = "okay";
511
512 xor00 {
513 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
514 dmacap,memcpy;
515 dmacap,xor;
516 };
517 xor01 {
518 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
519 dmacap,memcpy;
520 dmacap,xor;
521 dmacap,memset;
522 };
523 };
524
525 xor1: xor@60900 {
526 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
527 reg = <0x60900 0x100
528 0x60b00 0x100>;
529 clocks = <&gateclk 28>;
530 status = "okay";
531
532 xor10 {
533 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
534 dmacap,memcpy;
535 dmacap,xor;
536 };
537 xor11 {
538 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
539 dmacap,memcpy;
540 dmacap,xor;
541 dmacap,memset;
542 };
543 };
544
545 mdio: mdio@72004 {
546 #address-cells = <1>;
547 #size-cells = <0>;
548 compatible = "marvell,orion-mdio";
549 reg = <0x72004 0x4>;
550 clocks = <&gateclk 4>;
551 };
552
553 cesa: crypto@90000 {
554 compatible = "marvell,armada-38x-crypto";
555 reg = <0x90000 0x10000>;
556 reg-names = "regs";
557 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
558 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
559 clocks = <&gateclk 23>, <&gateclk 21>,
560 <&gateclk 14>, <&gateclk 16>;
561 clock-names = "cesa0", "cesa1",
562 "cesaz0", "cesaz1";
563 marvell,crypto-srams = <&crypto_sram0>,
564 <&crypto_sram1>;
565 marvell,crypto-sram-size = <0x800>;
566 };
567
568 rtc: rtc@a3800 {
569 compatible = "marvell,armada-380-rtc";
570 reg = <0xa3800 0x20>, <0x184a0 0x0c>;
571 reg-names = "rtc", "rtc-soc";
572 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
573 };
574
575 ahci0: sata@a8000 {
576 compatible = "marvell,armada-380-ahci";
577 reg = <0xa8000 0x2000>;
578 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
579 clocks = <&gateclk 15>;
580 status = "disabled";
581 };
582
583 bm: bm@c8000 {
584 compatible = "marvell,armada-380-neta-bm";
585 reg = <0xc8000 0xac>;
586 clocks = <&gateclk 13>;
587 internal-mem = <&bm_bppi>;
588 status = "disabled";
589 };
590
591 ahci1: sata@e0000 {
592 compatible = "marvell,armada-380-ahci";
593 reg = <0xe0000 0x2000>;
594 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
595 clocks = <&gateclk 30>;
596 status = "disabled";
597 };
598
599 coredivclk: clock@e4250 {
600 compatible = "marvell,armada-380-corediv-clock";
601 reg = <0xe4250 0xc>;
602 #clock-cells = <1>;
603 clocks = <&mainpll>;
604 clock-output-names = "nand";
605 };
606
607 thermal: thermal@e8078 {
608 compatible = "marvell,armada380-thermal";
609 reg = <0xe4078 0x4>, <0xe4070 0x8>;
610 status = "okay";
611 };
612
613 nand_controller: nand-controller@d0000 {
614 compatible = "marvell,armada370-nand-controller";
615 reg = <0xd0000 0x54>;
616 #address-cells = <1>;
617 #size-cells = <0>;
618 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
619 clocks = <&coredivclk 0>;
620 status = "disabled";
621 };
622
623 sdhci: sdhci@d8000 {
624 compatible = "marvell,armada-380-sdhci";
625 reg-names = "sdhci", "mbus", "conf-sdio3";
626 reg = <0xd8000 0x1000>,
627 <0xdc000 0x100>,
628 <0x18454 0x4>;
629 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
630 clocks = <&gateclk 17>;
631 mrvl,clk-delay-cycles = <0x1F>;
632 status = "disabled";
633 };
634
635 audio_controller: audio-controller@e8000 {
636 #sound-dai-cells = <1>;
637 compatible = "marvell,armada-380-audio";
638 reg = <0xe8000 0x4000>, <0x18410 0xc>,
639 <0x18204 0x4>;
640 reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
641 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
642 clocks = <&gateclk 0>;
643 clock-names = "internal";
644 status = "disabled";
645 };
646
647 usb3_0: usb3@f0000 {
648 compatible = "marvell,armada-380-xhci";
649 reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
650 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
651 clocks = <&gateclk 9>;
652 status = "disabled";
653 };
654
655 usb3_1: usb3@f8000 {
656 compatible = "marvell,armada-380-xhci";
657 reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
658 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
659 clocks = <&gateclk 10>;
660 status = "disabled";
661 };
662 };
663
664 crypto_sram0: sa-sram0 {
665 compatible = "mmio-sram";
666 reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
667 clocks = <&gateclk 23>;
668 #address-cells = <1>;
669 #size-cells = <1>;
670 ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
671 };
672
673 crypto_sram1: sa-sram1 {
674 compatible = "mmio-sram";
675 reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
676 clocks = <&gateclk 21>;
677 #address-cells = <1>;
678 #size-cells = <1>;
679 ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
680 };
681
682 bm_bppi: bm-bppi {
683 compatible = "mmio-sram";
684 reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
685 ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
686 #address-cells = <1>;
687 #size-cells = <1>;
688 clocks = <&gateclk 13>;
689 no-memory-wc;
690 status = "disabled";
691 };
692
693 spi0: spi@10600 {
694 compatible = "marvell,armada-380-spi",
695 "marvell,orion-spi";
696 reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
697 #address-cells = <1>;
698 #size-cells = <0>;
699 cell-index = <0>;
700 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
701 clocks = <&coreclk 0>;
702 status = "disabled";
703 };
704
705 spi1: spi@10680 {
706 compatible = "marvell,armada-380-spi",
707 "marvell,orion-spi";
708 reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
709 #address-cells = <1>;
710 #size-cells = <0>;
711 cell-index = <1>;
712 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
713 clocks = <&coreclk 0>;
714 status = "disabled";
715 };
716 };
717
718 clocks {
719 /* 1 GHz fixed main PLL */
720 mainpll: mainpll {
721 compatible = "fixed-clock";
722 #clock-cells = <0>;
723 clock-frequency = <1000000000>;
724 };
725
726 /* 25 MHz reference crystal */
727 refclk: oscillator {
728 compatible = "fixed-clock";
729 #clock-cells = <0>;
730 clock-frequency = <25000000>;
731 };
732 };
733};
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Marvell Armada 38x family of SoCs.
4 *
5 * Copyright (C) 2014 Marvell
6 *
7 * Lior Amsalem <alior@marvell.com>
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 */
11
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include <dt-bindings/interrupt-controller/irq.h>
14
15#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
16
17/ {
18 #address-cells = <1>;
19 #size-cells = <1>;
20
21 model = "Marvell Armada 38x family SoC";
22 compatible = "marvell,armada380";
23
24 aliases {
25 gpio0 = &gpio0;
26 gpio1 = &gpio1;
27 serial0 = &uart0;
28 serial1 = &uart1;
29 };
30
31 pmu {
32 compatible = "arm,cortex-a9-pmu";
33 interrupts-extended = <&mpic 3>;
34 };
35
36 soc {
37 compatible = "marvell,armada380-mbus", "simple-bus";
38 #address-cells = <2>;
39 #size-cells = <1>;
40 controller = <&mbusc>;
41 interrupt-parent = <&gic>;
42 pcie-mem-aperture = <0xe0000000 0x8000000>;
43 pcie-io-aperture = <0xe8000000 0x100000>;
44
45 bootrom {
46 compatible = "marvell,bootrom";
47 reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
48 };
49
50 devbus_bootcs: devbus-bootcs {
51 compatible = "marvell,mvebu-devbus";
52 reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
53 ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
54 #address-cells = <1>;
55 #size-cells = <1>;
56 clocks = <&coreclk 0>;
57 status = "disabled";
58 };
59
60 devbus_cs0: devbus-cs0 {
61 compatible = "marvell,mvebu-devbus";
62 reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
63 ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
64 #address-cells = <1>;
65 #size-cells = <1>;
66 clocks = <&coreclk 0>;
67 status = "disabled";
68 };
69
70 devbus_cs1: devbus-cs1 {
71 compatible = "marvell,mvebu-devbus";
72 reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
73 ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
74 #address-cells = <1>;
75 #size-cells = <1>;
76 clocks = <&coreclk 0>;
77 status = "disabled";
78 };
79
80 devbus_cs2: devbus-cs2 {
81 compatible = "marvell,mvebu-devbus";
82 reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
83 ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
84 #address-cells = <1>;
85 #size-cells = <1>;
86 clocks = <&coreclk 0>;
87 status = "disabled";
88 };
89
90 devbus_cs3: devbus-cs3 {
91 compatible = "marvell,mvebu-devbus";
92 reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
93 ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
94 #address-cells = <1>;
95 #size-cells = <1>;
96 clocks = <&coreclk 0>;
97 status = "disabled";
98 };
99
100 internal-regs {
101 compatible = "simple-bus";
102 #address-cells = <1>;
103 #size-cells = <1>;
104 ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
105
106 sdramc: sdramc@1400 {
107 compatible = "marvell,armada-xp-sdram-controller";
108 reg = <0x1400 0x500>;
109 };
110
111 L2: cache-controller@8000 {
112 compatible = "arm,pl310-cache";
113 reg = <0x8000 0x1000>;
114 cache-unified;
115 cache-level = <2>;
116 arm,double-linefill-incr = <0>;
117 arm,double-linefill-wrap = <0>;
118 arm,double-linefill = <0>;
119 prefetch-data = <1>;
120 };
121
122 scu@c000 {
123 compatible = "arm,cortex-a9-scu";
124 reg = <0xc000 0x58>;
125 };
126
127 timer@c200 {
128 compatible = "arm,cortex-a9-global-timer";
129 reg = <0xc200 0x20>;
130 interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
131 clocks = <&coreclk 2>;
132 };
133
134 timer@c600 {
135 compatible = "arm,cortex-a9-twd-timer";
136 reg = <0xc600 0x20>;
137 interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
138 clocks = <&coreclk 2>;
139 };
140
141 gic: interrupt-controller@d000 {
142 compatible = "arm,cortex-a9-gic";
143 #interrupt-cells = <3>;
144 #size-cells = <0>;
145 interrupt-controller;
146 reg = <0xd000 0x1000>,
147 <0xc100 0x100>;
148 };
149
150 i2c0: i2c@11000 {
151 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
152 reg = <0x11000 0x20>;
153 #address-cells = <1>;
154 #size-cells = <0>;
155 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
156 clocks = <&coreclk 0>;
157 status = "disabled";
158 };
159
160 i2c1: i2c@11100 {
161 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
162 reg = <0x11100 0x20>;
163 #address-cells = <1>;
164 #size-cells = <0>;
165 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
166 clocks = <&coreclk 0>;
167 status = "disabled";
168 };
169
170 uart0: serial@12000 {
171 compatible = "marvell,armada-38x-uart";
172 reg = <0x12000 0x100>;
173 reg-shift = <2>;
174 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
175 reg-io-width = <1>;
176 clocks = <&coreclk 0>;
177 status = "disabled";
178 };
179
180 uart1: serial@12100 {
181 compatible = "marvell,armada-38x-uart";
182 reg = <0x12100 0x100>;
183 reg-shift = <2>;
184 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
185 reg-io-width = <1>;
186 clocks = <&coreclk 0>;
187 status = "disabled";
188 };
189
190 pinctrl: pinctrl@18000 {
191 reg = <0x18000 0x20>;
192
193 ge0_rgmii_pins: ge-rgmii-pins-0 {
194 marvell,pins = "mpp6", "mpp7", "mpp8",
195 "mpp9", "mpp10", "mpp11",
196 "mpp12", "mpp13", "mpp14",
197 "mpp15", "mpp16", "mpp17";
198 marvell,function = "ge0";
199 };
200
201 ge1_rgmii_pins: ge-rgmii-pins-1 {
202 marvell,pins = "mpp21", "mpp27", "mpp28",
203 "mpp29", "mpp30", "mpp31",
204 "mpp32", "mpp37", "mpp38",
205 "mpp39", "mpp40", "mpp41";
206 marvell,function = "ge1";
207 };
208
209 i2c0_pins: i2c-pins-0 {
210 marvell,pins = "mpp2", "mpp3";
211 marvell,function = "i2c0";
212 };
213
214 mdio_pins: mdio-pins {
215 marvell,pins = "mpp4", "mpp5";
216 marvell,function = "ge";
217 };
218
219 ref_clk0_pins: ref-clk-pins-0 {
220 marvell,pins = "mpp45";
221 marvell,function = "ref";
222 };
223
224 ref_clk1_pins: ref-clk-pins-1 {
225 marvell,pins = "mpp46";
226 marvell,function = "ref";
227 };
228
229 spi0_pins: spi-pins-0 {
230 marvell,pins = "mpp22", "mpp23", "mpp24",
231 "mpp25";
232 marvell,function = "spi0";
233 };
234
235 spi1_pins: spi-pins-1 {
236 marvell,pins = "mpp56", "mpp57", "mpp58",
237 "mpp59";
238 marvell,function = "spi1";
239 };
240
241 nand_pins: nand-pins {
242 marvell,pins = "mpp22", "mpp34", "mpp23",
243 "mpp33", "mpp38", "mpp28",
244 "mpp40", "mpp42", "mpp35",
245 "mpp36", "mpp25", "mpp30",
246 "mpp32";
247 marvell,function = "dev";
248 };
249
250 nand_rb: nand-rb {
251 marvell,pins = "mpp41";
252 marvell,function = "nand";
253 };
254
255 uart0_pins: uart-pins-0 {
256 marvell,pins = "mpp0", "mpp1";
257 marvell,function = "ua0";
258 };
259
260 uart1_pins: uart-pins-1 {
261 marvell,pins = "mpp19", "mpp20";
262 marvell,function = "ua1";
263 };
264
265 sdhci_pins: sdhci-pins {
266 marvell,pins = "mpp48", "mpp49", "mpp50",
267 "mpp52", "mpp53", "mpp54",
268 "mpp55", "mpp57", "mpp58",
269 "mpp59";
270 marvell,function = "sd0";
271 };
272
273 sata0_pins: sata-pins-0 {
274 marvell,pins = "mpp20";
275 marvell,function = "sata0";
276 };
277
278 sata1_pins: sata-pins-1 {
279 marvell,pins = "mpp19";
280 marvell,function = "sata1";
281 };
282
283 sata2_pins: sata-pins-2 {
284 marvell,pins = "mpp47";
285 marvell,function = "sata2";
286 };
287
288 sata3_pins: sata-pins-3 {
289 marvell,pins = "mpp44";
290 marvell,function = "sata3";
291 };
292 };
293
294 gpio0: gpio@18100 {
295 compatible = "marvell,armada-370-gpio",
296 "marvell,orion-gpio";
297 reg = <0x18100 0x40>, <0x181c0 0x08>;
298 reg-names = "gpio", "pwm";
299 ngpios = <32>;
300 gpio-controller;
301 #gpio-cells = <2>;
302 #pwm-cells = <2>;
303 interrupt-controller;
304 #interrupt-cells = <2>;
305 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
306 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
307 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
308 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
309 clocks = <&coreclk 0>;
310 };
311
312 gpio1: gpio@18140 {
313 compatible = "marvell,armada-370-gpio",
314 "marvell,orion-gpio";
315 reg = <0x18140 0x40>, <0x181c8 0x08>;
316 reg-names = "gpio", "pwm";
317 ngpios = <28>;
318 gpio-controller;
319 #gpio-cells = <2>;
320 #pwm-cells = <2>;
321 interrupt-controller;
322 #interrupt-cells = <2>;
323 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
324 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
325 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
326 <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
327 clocks = <&coreclk 0>;
328 };
329
330 systemc: system-controller@18200 {
331 compatible = "marvell,armada-380-system-controller",
332 "marvell,armada-370-xp-system-controller";
333 reg = <0x18200 0x100>;
334 };
335
336 gateclk: clock-gating-control@18220 {
337 compatible = "marvell,armada-380-gating-clock";
338 reg = <0x18220 0x4>;
339 clocks = <&coreclk 0>;
340 #clock-cells = <1>;
341 };
342
343 comphy: phy@18300 {
344 compatible = "marvell,armada-380-comphy";
345 reg-names = "comphy", "conf";
346 reg = <0x18300 0x100>, <0x18460 4>;
347 #address-cells = <1>;
348 #size-cells = <0>;
349
350 comphy0: phy@0 {
351 reg = <0>;
352 #phy-cells = <1>;
353 };
354
355 comphy1: phy@1 {
356 reg = <1>;
357 #phy-cells = <1>;
358 };
359
360 comphy2: phy@2 {
361 reg = <2>;
362 #phy-cells = <1>;
363 };
364
365 comphy3: phy@3 {
366 reg = <3>;
367 #phy-cells = <1>;
368 };
369
370 comphy4: phy@4 {
371 reg = <4>;
372 #phy-cells = <1>;
373 };
374
375 comphy5: phy@5 {
376 reg = <5>;
377 #phy-cells = <1>;
378 };
379 };
380
381 coreclk: mvebu-sar@18600 {
382 compatible = "marvell,armada-380-core-clock";
383 reg = <0x18600 0x04>;
384 #clock-cells = <1>;
385 };
386
387 mbusc: mbus-controller@20000 {
388 compatible = "marvell,mbus-controller";
389 reg = <0x20000 0x100>, <0x20180 0x20>,
390 <0x20250 0x8>;
391 };
392
393 mpic: interrupt-controller@20a00 {
394 compatible = "marvell,mpic";
395 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
396 #interrupt-cells = <1>;
397 #size-cells = <1>;
398 interrupt-controller;
399 msi-controller;
400 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
401 };
402
403 timer: timer@20300 {
404 compatible = "marvell,armada-380-timer",
405 "marvell,armada-xp-timer";
406 reg = <0x20300 0x30>, <0x21040 0x30>;
407 interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
408 <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
409 <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
410 <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
411 <&mpic 5>,
412 <&mpic 6>;
413 clocks = <&coreclk 2>, <&refclk>;
414 clock-names = "nbclk", "fixed";
415 };
416
417 watchdog: watchdog@20300 {
418 compatible = "marvell,armada-380-wdt";
419 reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
420 clocks = <&coreclk 2>, <&refclk>;
421 clock-names = "nbclk", "fixed";
422 interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
423 <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
424 };
425
426 cpurst: cpurst@20800 {
427 compatible = "marvell,armada-370-cpu-reset";
428 reg = <0x20800 0x10>;
429 };
430
431 mpcore-soc-ctrl@20d20 {
432 compatible = "marvell,armada-380-mpcore-soc-ctrl";
433 reg = <0x20d20 0x6c>;
434 };
435
436 coherencyfab: coherency-fabric@21010 {
437 compatible = "marvell,armada-380-coherency-fabric";
438 reg = <0x21010 0x1c>;
439 };
440
441 pmsu: pmsu@22000 {
442 compatible = "marvell,armada-380-pmsu";
443 reg = <0x22000 0x1000>;
444 };
445
446 /*
447 * As a special exception to the "order by
448 * register address" rule, the eth0 node is
449 * placed here to ensure that it gets
450 * registered as the first interface, since
451 * the network subsystem doesn't allow naming
452 * interfaces using DT aliases. Without this,
453 * the ordering of interfaces is different
454 * from the one used in U-Boot and the
455 * labeling of interfaces on the boards, which
456 * is very confusing for users.
457 */
458 eth0: ethernet@70000 {
459 compatible = "marvell,armada-370-neta";
460 reg = <0x70000 0x4000>;
461 interrupts-extended = <&mpic 8>;
462 clocks = <&gateclk 4>;
463 tx-csum-limit = <9800>;
464 status = "disabled";
465 };
466
467 eth1: ethernet@30000 {
468 compatible = "marvell,armada-370-neta";
469 reg = <0x30000 0x4000>;
470 interrupts-extended = <&mpic 10>;
471 clocks = <&gateclk 3>;
472 status = "disabled";
473 };
474
475 eth2: ethernet@34000 {
476 compatible = "marvell,armada-370-neta";
477 reg = <0x34000 0x4000>;
478 interrupts-extended = <&mpic 12>;
479 clocks = <&gateclk 2>;
480 status = "disabled";
481 };
482
483 usb0: usb@58000 {
484 compatible = "marvell,orion-ehci";
485 reg = <0x58000 0x500>;
486 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
487 clocks = <&gateclk 18>;
488 status = "disabled";
489 };
490
491 xor0: xor@60800 {
492 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
493 reg = <0x60800 0x100
494 0x60a00 0x100>;
495 clocks = <&gateclk 22>;
496 status = "okay";
497
498 xor00 {
499 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
500 dmacap,memcpy;
501 dmacap,xor;
502 };
503 xor01 {
504 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
505 dmacap,memcpy;
506 dmacap,xor;
507 dmacap,memset;
508 };
509 };
510
511 xor1: xor@60900 {
512 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
513 reg = <0x60900 0x100
514 0x60b00 0x100>;
515 clocks = <&gateclk 28>;
516 status = "okay";
517
518 xor10 {
519 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
520 dmacap,memcpy;
521 dmacap,xor;
522 };
523 xor11 {
524 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
525 dmacap,memcpy;
526 dmacap,xor;
527 dmacap,memset;
528 };
529 };
530
531 mdio: mdio@72004 {
532 #address-cells = <1>;
533 #size-cells = <0>;
534 compatible = "marvell,orion-mdio";
535 reg = <0x72004 0x4>;
536 clocks = <&gateclk 4>;
537 };
538
539 cesa: crypto@90000 {
540 compatible = "marvell,armada-38x-crypto";
541 reg = <0x90000 0x10000>;
542 reg-names = "regs";
543 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
544 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
545 clocks = <&gateclk 23>, <&gateclk 21>,
546 <&gateclk 14>, <&gateclk 16>;
547 clock-names = "cesa0", "cesa1",
548 "cesaz0", "cesaz1";
549 marvell,crypto-srams = <&crypto_sram0>,
550 <&crypto_sram1>;
551 marvell,crypto-sram-size = <0x800>;
552 };
553
554 rtc: rtc@a3800 {
555 compatible = "marvell,armada-380-rtc";
556 reg = <0xa3800 0x20>, <0x184a0 0x0c>;
557 reg-names = "rtc", "rtc-soc";
558 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
559 };
560
561 ahci0: sata@a8000 {
562 compatible = "marvell,armada-380-ahci";
563 reg = <0xa8000 0x2000>;
564 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
565 clocks = <&gateclk 15>;
566 status = "disabled";
567 };
568
569 bm: bm@c8000 {
570 compatible = "marvell,armada-380-neta-bm";
571 reg = <0xc8000 0xac>;
572 clocks = <&gateclk 13>;
573 internal-mem = <&bm_bppi>;
574 status = "disabled";
575 };
576
577 ahci1: sata@e0000 {
578 compatible = "marvell,armada-380-ahci";
579 reg = <0xe0000 0x2000>;
580 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
581 clocks = <&gateclk 30>;
582 status = "disabled";
583 };
584
585 coredivclk: clock@e4250 {
586 compatible = "marvell,armada-380-corediv-clock";
587 reg = <0xe4250 0xc>;
588 #clock-cells = <1>;
589 clocks = <&mainpll>;
590 clock-output-names = "nand";
591 };
592
593 thermal: thermal@e8078 {
594 compatible = "marvell,armada380-thermal";
595 reg = <0xe4078 0x4>, <0xe4070 0x8>;
596 status = "okay";
597 };
598
599 nand_controller: nand-controller@d0000 {
600 compatible = "marvell,armada370-nand-controller";
601 reg = <0xd0000 0x54>;
602 #address-cells = <1>;
603 #size-cells = <0>;
604 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
605 clocks = <&coredivclk 0>;
606 status = "disabled";
607 };
608
609 sdhci: sdhci@d8000 {
610 compatible = "marvell,armada-380-sdhci";
611 reg-names = "sdhci", "mbus", "conf-sdio3";
612 reg = <0xd8000 0x1000>,
613 <0xdc000 0x100>,
614 <0x18454 0x4>;
615 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
616 clocks = <&gateclk 17>;
617 mrvl,clk-delay-cycles = <0x1F>;
618 status = "disabled";
619 };
620
621 usb3_0: usb3@f0000 {
622 compatible = "marvell,armada-380-xhci";
623 reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
624 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
625 clocks = <&gateclk 9>;
626 status = "disabled";
627 };
628
629 usb3_1: usb3@f8000 {
630 compatible = "marvell,armada-380-xhci";
631 reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
632 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
633 clocks = <&gateclk 10>;
634 status = "disabled";
635 };
636 };
637
638 crypto_sram0: sa-sram0 {
639 compatible = "mmio-sram";
640 reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
641 clocks = <&gateclk 23>;
642 #address-cells = <1>;
643 #size-cells = <1>;
644 ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
645 };
646
647 crypto_sram1: sa-sram1 {
648 compatible = "mmio-sram";
649 reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
650 clocks = <&gateclk 21>;
651 #address-cells = <1>;
652 #size-cells = <1>;
653 ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
654 };
655
656 bm_bppi: bm-bppi {
657 compatible = "mmio-sram";
658 reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
659 ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
660 #address-cells = <1>;
661 #size-cells = <1>;
662 clocks = <&gateclk 13>;
663 no-memory-wc;
664 status = "disabled";
665 };
666
667 spi0: spi@10600 {
668 compatible = "marvell,armada-380-spi",
669 "marvell,orion-spi";
670 reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
671 #address-cells = <1>;
672 #size-cells = <0>;
673 cell-index = <0>;
674 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
675 clocks = <&coreclk 0>;
676 status = "disabled";
677 };
678
679 spi1: spi@10680 {
680 compatible = "marvell,armada-380-spi",
681 "marvell,orion-spi";
682 reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
683 #address-cells = <1>;
684 #size-cells = <0>;
685 cell-index = <1>;
686 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
687 clocks = <&coreclk 0>;
688 status = "disabled";
689 };
690 };
691
692 clocks {
693 /* 1 GHz fixed main PLL */
694 mainpll: mainpll {
695 compatible = "fixed-clock";
696 #clock-cells = <0>;
697 clock-frequency = <1000000000>;
698 };
699
700 /* 25 MHz reference crystal */
701 refclk: oscillator {
702 compatible = "fixed-clock";
703 #clock-cells = <0>;
704 clock-frequency = <25000000>;
705 };
706 };
707};