Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * derived from "twidjoy.c"
4 *
5 * Copyright (c) 2008 Martin Kebert
6 * Copyright (c) 2001 Arndt Schoenewald
7 * Copyright (c) 2000-2001 Vojtech Pavlik
8 * Copyright (c) 2000 Mark Fletcher
9 */
10
11/*
12 * Driver to use 4CH RC transmitter using Zhen Hua 5-byte protocol (Walkera Lama,
13 * EasyCopter etc.) as a joystick under Linux.
14 *
15 * RC transmitters using Zhen Hua 5-byte protocol are cheap four channels
16 * transmitters for control a RC planes or RC helicopters with possibility to
17 * connect on a serial port.
18 * Data coming from transmitter is in this order:
19 * 1. byte = synchronisation byte
20 * 2. byte = X axis
21 * 3. byte = Y axis
22 * 4. byte = RZ axis
23 * 5. byte = Z axis
24 * (and this is repeated)
25 *
26 * For questions or feedback regarding this driver module please contact:
27 * Martin Kebert <gkmarty@gmail.com> - but I am not a C-programmer nor kernel
28 * coder :-(
29 */
30
31#include <linux/kernel.h>
32#include <linux/module.h>
33#include <linux/slab.h>
34#include <linux/bitrev.h>
35#include <linux/input.h>
36#include <linux/serio.h>
37
38#define DRIVER_DESC "RC transmitter with 5-byte Zhen Hua protocol joystick driver"
39
40MODULE_DESCRIPTION(DRIVER_DESC);
41MODULE_LICENSE("GPL");
42
43/*
44 * Constants.
45 */
46
47#define ZHENHUA_MAX_LENGTH 5
48
49/*
50 * Zhen Hua data.
51 */
52
53struct zhenhua {
54 struct input_dev *dev;
55 int idx;
56 unsigned char data[ZHENHUA_MAX_LENGTH];
57 char phys[32];
58};
59
60/*
61 * zhenhua_process_packet() decodes packets the driver receives from the
62 * RC transmitter. It updates the data accordingly.
63 */
64
65static void zhenhua_process_packet(struct zhenhua *zhenhua)
66{
67 struct input_dev *dev = zhenhua->dev;
68 unsigned char *data = zhenhua->data;
69
70 input_report_abs(dev, ABS_Y, data[1]);
71 input_report_abs(dev, ABS_X, data[2]);
72 input_report_abs(dev, ABS_RZ, data[3]);
73 input_report_abs(dev, ABS_Z, data[4]);
74
75 input_sync(dev);
76}
77
78/*
79 * zhenhua_interrupt() is called by the low level driver when characters
80 * are ready for us. We then buffer them for further processing, or call the
81 * packet processing routine.
82 */
83
84static irqreturn_t zhenhua_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
85{
86 struct zhenhua *zhenhua = serio_get_drvdata(serio);
87
88 /* All Zhen Hua packets are 5 bytes. The fact that the first byte
89 * is allways 0xf7 and all others are in range 0x32 - 0xc8 (50-200)
90 * can be used to check and regain sync. */
91
92 if (data == 0xef)
93 zhenhua->idx = 0; /* this byte starts a new packet */
94 else if (zhenhua->idx == 0)
95 return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
96
97 if (zhenhua->idx < ZHENHUA_MAX_LENGTH)
98 zhenhua->data[zhenhua->idx++] = bitrev8(data);
99
100 if (zhenhua->idx == ZHENHUA_MAX_LENGTH) {
101 zhenhua_process_packet(zhenhua);
102 zhenhua->idx = 0;
103 }
104
105 return IRQ_HANDLED;
106}
107
108/*
109 * zhenhua_disconnect() is the opposite of zhenhua_connect()
110 */
111
112static void zhenhua_disconnect(struct serio *serio)
113{
114 struct zhenhua *zhenhua = serio_get_drvdata(serio);
115
116 serio_close(serio);
117 serio_set_drvdata(serio, NULL);
118 input_unregister_device(zhenhua->dev);
119 kfree(zhenhua);
120}
121
122/*
123 * zhenhua_connect() is the routine that is called when someone adds a
124 * new serio device. It looks for the Twiddler, and if found, registers
125 * it as an input device.
126 */
127
128static int zhenhua_connect(struct serio *serio, struct serio_driver *drv)
129{
130 struct zhenhua *zhenhua;
131 struct input_dev *input_dev;
132 int err = -ENOMEM;
133
134 zhenhua = kzalloc(sizeof(struct zhenhua), GFP_KERNEL);
135 input_dev = input_allocate_device();
136 if (!zhenhua || !input_dev)
137 goto fail1;
138
139 zhenhua->dev = input_dev;
140 snprintf(zhenhua->phys, sizeof(zhenhua->phys), "%s/input0", serio->phys);
141
142 input_dev->name = "Zhen Hua 5-byte device";
143 input_dev->phys = zhenhua->phys;
144 input_dev->id.bustype = BUS_RS232;
145 input_dev->id.vendor = SERIO_ZHENHUA;
146 input_dev->id.product = 0x0001;
147 input_dev->id.version = 0x0100;
148 input_dev->dev.parent = &serio->dev;
149
150 input_dev->evbit[0] = BIT(EV_ABS);
151 input_set_abs_params(input_dev, ABS_X, 50, 200, 0, 0);
152 input_set_abs_params(input_dev, ABS_Y, 50, 200, 0, 0);
153 input_set_abs_params(input_dev, ABS_Z, 50, 200, 0, 0);
154 input_set_abs_params(input_dev, ABS_RZ, 50, 200, 0, 0);
155
156 serio_set_drvdata(serio, zhenhua);
157
158 err = serio_open(serio, drv);
159 if (err)
160 goto fail2;
161
162 err = input_register_device(zhenhua->dev);
163 if (err)
164 goto fail3;
165
166 return 0;
167
168 fail3: serio_close(serio);
169 fail2: serio_set_drvdata(serio, NULL);
170 fail1: input_free_device(input_dev);
171 kfree(zhenhua);
172 return err;
173}
174
175/*
176 * The serio driver structure.
177 */
178
179static const struct serio_device_id zhenhua_serio_ids[] = {
180 {
181 .type = SERIO_RS232,
182 .proto = SERIO_ZHENHUA,
183 .id = SERIO_ANY,
184 .extra = SERIO_ANY,
185 },
186 { 0 }
187};
188
189MODULE_DEVICE_TABLE(serio, zhenhua_serio_ids);
190
191static struct serio_driver zhenhua_drv = {
192 .driver = {
193 .name = "zhenhua",
194 },
195 .description = DRIVER_DESC,
196 .id_table = zhenhua_serio_ids,
197 .interrupt = zhenhua_interrupt,
198 .connect = zhenhua_connect,
199 .disconnect = zhenhua_disconnect,
200};
201
202module_serio_driver(zhenhua_drv);
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * derived from "twidjoy.c"
4 *
5 * Copyright (c) 2008 Martin Kebert
6 * Copyright (c) 2001 Arndt Schoenewald
7 * Copyright (c) 2000-2001 Vojtech Pavlik
8 * Copyright (c) 2000 Mark Fletcher
9 */
10
11/*
12 * Driver to use 4CH RC transmitter using Zhen Hua 5-byte protocol (Walkera Lama,
13 * EasyCopter etc.) as a joystick under Linux.
14 *
15 * RC transmitters using Zhen Hua 5-byte protocol are cheap four channels
16 * transmitters for control a RC planes or RC helicopters with possibility to
17 * connect on a serial port.
18 * Data coming from transmitter is in this order:
19 * 1. byte = synchronisation byte
20 * 2. byte = X axis
21 * 3. byte = Y axis
22 * 4. byte = RZ axis
23 * 5. byte = Z axis
24 * (and this is repeated)
25 *
26 * For questions or feedback regarding this driver module please contact:
27 * Martin Kebert <gkmarty@gmail.com> - but I am not a C-programmer nor kernel
28 * coder :-(
29 */
30
31/*
32 */
33
34#include <linux/kernel.h>
35#include <linux/module.h>
36#include <linux/slab.h>
37#include <linux/bitrev.h>
38#include <linux/input.h>
39#include <linux/serio.h>
40
41#define DRIVER_DESC "RC transmitter with 5-byte Zhen Hua protocol joystick driver"
42
43MODULE_DESCRIPTION(DRIVER_DESC);
44MODULE_LICENSE("GPL");
45
46/*
47 * Constants.
48 */
49
50#define ZHENHUA_MAX_LENGTH 5
51
52/*
53 * Zhen Hua data.
54 */
55
56struct zhenhua {
57 struct input_dev *dev;
58 int idx;
59 unsigned char data[ZHENHUA_MAX_LENGTH];
60 char phys[32];
61};
62
63/*
64 * zhenhua_process_packet() decodes packets the driver receives from the
65 * RC transmitter. It updates the data accordingly.
66 */
67
68static void zhenhua_process_packet(struct zhenhua *zhenhua)
69{
70 struct input_dev *dev = zhenhua->dev;
71 unsigned char *data = zhenhua->data;
72
73 input_report_abs(dev, ABS_Y, data[1]);
74 input_report_abs(dev, ABS_X, data[2]);
75 input_report_abs(dev, ABS_RZ, data[3]);
76 input_report_abs(dev, ABS_Z, data[4]);
77
78 input_sync(dev);
79}
80
81/*
82 * zhenhua_interrupt() is called by the low level driver when characters
83 * are ready for us. We then buffer them for further processing, or call the
84 * packet processing routine.
85 */
86
87static irqreturn_t zhenhua_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
88{
89 struct zhenhua *zhenhua = serio_get_drvdata(serio);
90
91 /* All Zhen Hua packets are 5 bytes. The fact that the first byte
92 * is allways 0xf7 and all others are in range 0x32 - 0xc8 (50-200)
93 * can be used to check and regain sync. */
94
95 if (data == 0xef)
96 zhenhua->idx = 0; /* this byte starts a new packet */
97 else if (zhenhua->idx == 0)
98 return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
99
100 if (zhenhua->idx < ZHENHUA_MAX_LENGTH)
101 zhenhua->data[zhenhua->idx++] = bitrev8(data);
102
103 if (zhenhua->idx == ZHENHUA_MAX_LENGTH) {
104 zhenhua_process_packet(zhenhua);
105 zhenhua->idx = 0;
106 }
107
108 return IRQ_HANDLED;
109}
110
111/*
112 * zhenhua_disconnect() is the opposite of zhenhua_connect()
113 */
114
115static void zhenhua_disconnect(struct serio *serio)
116{
117 struct zhenhua *zhenhua = serio_get_drvdata(serio);
118
119 serio_close(serio);
120 serio_set_drvdata(serio, NULL);
121 input_unregister_device(zhenhua->dev);
122 kfree(zhenhua);
123}
124
125/*
126 * zhenhua_connect() is the routine that is called when someone adds a
127 * new serio device. It looks for the Twiddler, and if found, registers
128 * it as an input device.
129 */
130
131static int zhenhua_connect(struct serio *serio, struct serio_driver *drv)
132{
133 struct zhenhua *zhenhua;
134 struct input_dev *input_dev;
135 int err = -ENOMEM;
136
137 zhenhua = kzalloc(sizeof(struct zhenhua), GFP_KERNEL);
138 input_dev = input_allocate_device();
139 if (!zhenhua || !input_dev)
140 goto fail1;
141
142 zhenhua->dev = input_dev;
143 snprintf(zhenhua->phys, sizeof(zhenhua->phys), "%s/input0", serio->phys);
144
145 input_dev->name = "Zhen Hua 5-byte device";
146 input_dev->phys = zhenhua->phys;
147 input_dev->id.bustype = BUS_RS232;
148 input_dev->id.vendor = SERIO_ZHENHUA;
149 input_dev->id.product = 0x0001;
150 input_dev->id.version = 0x0100;
151 input_dev->dev.parent = &serio->dev;
152
153 input_dev->evbit[0] = BIT(EV_ABS);
154 input_set_abs_params(input_dev, ABS_X, 50, 200, 0, 0);
155 input_set_abs_params(input_dev, ABS_Y, 50, 200, 0, 0);
156 input_set_abs_params(input_dev, ABS_Z, 50, 200, 0, 0);
157 input_set_abs_params(input_dev, ABS_RZ, 50, 200, 0, 0);
158
159 serio_set_drvdata(serio, zhenhua);
160
161 err = serio_open(serio, drv);
162 if (err)
163 goto fail2;
164
165 err = input_register_device(zhenhua->dev);
166 if (err)
167 goto fail3;
168
169 return 0;
170
171 fail3: serio_close(serio);
172 fail2: serio_set_drvdata(serio, NULL);
173 fail1: input_free_device(input_dev);
174 kfree(zhenhua);
175 return err;
176}
177
178/*
179 * The serio driver structure.
180 */
181
182static const struct serio_device_id zhenhua_serio_ids[] = {
183 {
184 .type = SERIO_RS232,
185 .proto = SERIO_ZHENHUA,
186 .id = SERIO_ANY,
187 .extra = SERIO_ANY,
188 },
189 { 0 }
190};
191
192MODULE_DEVICE_TABLE(serio, zhenhua_serio_ids);
193
194static struct serio_driver zhenhua_drv = {
195 .driver = {
196 .name = "zhenhua",
197 },
198 .description = DRIVER_DESC,
199 .id_table = zhenhua_serio_ids,
200 .interrupt = zhenhua_interrupt,
201 .connect = zhenhua_connect,
202 .disconnect = zhenhua_disconnect,
203};
204
205module_serio_driver(zhenhua_drv);