1/* SPDX-License-Identifier: GPL-2.0-or-later */
   2/*
   3 * OpenRISC head.S
   4 *
   5 * Linux architectural port borrowing liberally from similar works of
   6 * others.  All original copyrights apply as per the original source
   7 * declaration.
   8 *
   9 * Modifications for the OpenRISC architecture:
  10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
  11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
  12 */
  13
  14#include <linux/linkage.h>
  15#include <linux/threads.h>
  16#include <linux/errno.h>
  17#include <linux/init.h>
  18#include <linux/serial_reg.h>
  19#include <linux/pgtable.h>
  20#include <asm/processor.h>
  21#include <asm/page.h>
  22#include <asm/mmu.h>
  23#include <asm/thread_info.h>
  24#include <asm/cache.h>
  25#include <asm/spr_defs.h>
  26#include <asm/asm-offsets.h>
  27#include <linux/of_fdt.h>
  28
  29#define tophys(rd,rs)				\
  30	l.movhi	rd,hi(-KERNELBASE)		;\
  31	l.add	rd,rd,rs
  32
  33#define CLEAR_GPR(gpr)				\
  34	l.movhi	gpr,0x0
  35
  36#define LOAD_SYMBOL_2_GPR(gpr,symbol)		\
  37	l.movhi gpr,hi(symbol)			;\
  38	l.ori   gpr,gpr,lo(symbol)
  39
  40
  41#define UART_BASE_ADD      0x90000000
  42
  43#define EXCEPTION_SR  (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_SM)
  44#define SYSCALL_SR  (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_IEE | SPR_SR_TEE | SPR_SR_SM)
  45
  46/* ============================================[ tmp store locations ]=== */
  47
  48#define SPR_SHADOW_GPR(x)	((x) + SPR_GPR_BASE + 32)
  49
  50/*
  51 * emergency_print temporary stores
  52 */
  53#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
  54#define EMERGENCY_PRINT_STORE_GPR4	l.mtspr r0,r4,SPR_SHADOW_GPR(14)
  55#define EMERGENCY_PRINT_LOAD_GPR4	l.mfspr r4,r0,SPR_SHADOW_GPR(14)
  56
  57#define EMERGENCY_PRINT_STORE_GPR5	l.mtspr r0,r5,SPR_SHADOW_GPR(15)
  58#define EMERGENCY_PRINT_LOAD_GPR5	l.mfspr r5,r0,SPR_SHADOW_GPR(15)
  59
  60#define EMERGENCY_PRINT_STORE_GPR6	l.mtspr r0,r6,SPR_SHADOW_GPR(16)
  61#define EMERGENCY_PRINT_LOAD_GPR6	l.mfspr r6,r0,SPR_SHADOW_GPR(16)
  62
  63#define EMERGENCY_PRINT_STORE_GPR7	l.mtspr r0,r7,SPR_SHADOW_GPR(7)
  64#define EMERGENCY_PRINT_LOAD_GPR7	l.mfspr r7,r0,SPR_SHADOW_GPR(7)
  65
  66#define EMERGENCY_PRINT_STORE_GPR8	l.mtspr r0,r8,SPR_SHADOW_GPR(8)
  67#define EMERGENCY_PRINT_LOAD_GPR8	l.mfspr r8,r0,SPR_SHADOW_GPR(8)
  68
  69#define EMERGENCY_PRINT_STORE_GPR9	l.mtspr r0,r9,SPR_SHADOW_GPR(9)
  70#define EMERGENCY_PRINT_LOAD_GPR9	l.mfspr r9,r0,SPR_SHADOW_GPR(9)
  71
  72#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
  73#define EMERGENCY_PRINT_STORE_GPR4	l.sw    0x20(r0),r4
  74#define EMERGENCY_PRINT_LOAD_GPR4	l.lwz   r4,0x20(r0)
  75
  76#define EMERGENCY_PRINT_STORE_GPR5	l.sw    0x24(r0),r5
  77#define EMERGENCY_PRINT_LOAD_GPR5	l.lwz   r5,0x24(r0)
  78
  79#define EMERGENCY_PRINT_STORE_GPR6	l.sw    0x28(r0),r6
  80#define EMERGENCY_PRINT_LOAD_GPR6	l.lwz   r6,0x28(r0)
  81
  82#define EMERGENCY_PRINT_STORE_GPR7	l.sw    0x2c(r0),r7
  83#define EMERGENCY_PRINT_LOAD_GPR7	l.lwz   r7,0x2c(r0)
  84
  85#define EMERGENCY_PRINT_STORE_GPR8	l.sw    0x30(r0),r8
  86#define EMERGENCY_PRINT_LOAD_GPR8	l.lwz   r8,0x30(r0)
  87
  88#define EMERGENCY_PRINT_STORE_GPR9	l.sw    0x34(r0),r9
  89#define EMERGENCY_PRINT_LOAD_GPR9	l.lwz   r9,0x34(r0)
  90
  91#endif
  92
  93/*
  94 * TLB miss handlers temorary stores
  95 */
  96#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
  97#define EXCEPTION_STORE_GPR2		l.mtspr r0,r2,SPR_SHADOW_GPR(2)
  98#define EXCEPTION_LOAD_GPR2		l.mfspr r2,r0,SPR_SHADOW_GPR(2)
  99
 100#define EXCEPTION_STORE_GPR3		l.mtspr r0,r3,SPR_SHADOW_GPR(3)
 101#define EXCEPTION_LOAD_GPR3		l.mfspr r3,r0,SPR_SHADOW_GPR(3)
 102
 103#define EXCEPTION_STORE_GPR4		l.mtspr r0,r4,SPR_SHADOW_GPR(4)
 104#define EXCEPTION_LOAD_GPR4		l.mfspr r4,r0,SPR_SHADOW_GPR(4)
 105
 106#define EXCEPTION_STORE_GPR5		l.mtspr r0,r5,SPR_SHADOW_GPR(5)
 107#define EXCEPTION_LOAD_GPR5		l.mfspr r5,r0,SPR_SHADOW_GPR(5)
 108
 109#define EXCEPTION_STORE_GPR6		l.mtspr r0,r6,SPR_SHADOW_GPR(6)
 110#define EXCEPTION_LOAD_GPR6		l.mfspr r6,r0,SPR_SHADOW_GPR(6)
 111
 112#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
 113#define EXCEPTION_STORE_GPR2		l.sw    0x64(r0),r2
 114#define EXCEPTION_LOAD_GPR2		l.lwz   r2,0x64(r0)
 115
 116#define EXCEPTION_STORE_GPR3		l.sw    0x68(r0),r3
 117#define EXCEPTION_LOAD_GPR3		l.lwz   r3,0x68(r0)
 118
 119#define EXCEPTION_STORE_GPR4		l.sw    0x6c(r0),r4
 120#define EXCEPTION_LOAD_GPR4		l.lwz   r4,0x6c(r0)
 121
 122#define EXCEPTION_STORE_GPR5		l.sw    0x70(r0),r5
 123#define EXCEPTION_LOAD_GPR5		l.lwz   r5,0x70(r0)
 124
 125#define EXCEPTION_STORE_GPR6		l.sw    0x74(r0),r6
 126#define EXCEPTION_LOAD_GPR6		l.lwz   r6,0x74(r0)
 127
 128#endif
 129
 130/*
 131 * EXCEPTION_HANDLE temporary stores
 132 */
 133
 134#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
 135#define EXCEPTION_T_STORE_GPR30		l.mtspr r0,r30,SPR_SHADOW_GPR(30)
 136#define EXCEPTION_T_LOAD_GPR30(reg)	l.mfspr reg,r0,SPR_SHADOW_GPR(30)
 137
 138#define EXCEPTION_T_STORE_GPR10		l.mtspr r0,r10,SPR_SHADOW_GPR(10)
 139#define EXCEPTION_T_LOAD_GPR10(reg)	l.mfspr reg,r0,SPR_SHADOW_GPR(10)
 140
 141#define EXCEPTION_T_STORE_SP		l.mtspr r0,r1,SPR_SHADOW_GPR(1)
 142#define EXCEPTION_T_LOAD_SP(reg)	l.mfspr reg,r0,SPR_SHADOW_GPR(1)
 143
 144#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
 145#define EXCEPTION_T_STORE_GPR30		l.sw    0x78(r0),r30
 146#define EXCEPTION_T_LOAD_GPR30(reg)	l.lwz   reg,0x78(r0)
 147
 148#define EXCEPTION_T_STORE_GPR10		l.sw    0x7c(r0),r10
 149#define EXCEPTION_T_LOAD_GPR10(reg)	l.lwz   reg,0x7c(r0)
 150
 151#define EXCEPTION_T_STORE_SP		l.sw    0x80(r0),r1
 152#define EXCEPTION_T_LOAD_SP(reg)	l.lwz   reg,0x80(r0)
 153#endif
 154
 155/* =========================================================[ macros ]=== */
 156
 157#ifdef CONFIG_SMP
 158#define GET_CURRENT_PGD(reg,t1)					\
 159	LOAD_SYMBOL_2_GPR(reg,current_pgd)			;\
 160	l.mfspr	t1,r0,SPR_COREID				;\
 161	l.slli	t1,t1,2						;\
 162	l.add	reg,reg,t1					;\
 163	tophys  (t1,reg)					;\
 164	l.lwz   reg,0(t1)
 165#else
 166#define GET_CURRENT_PGD(reg,t1)					\
 167	LOAD_SYMBOL_2_GPR(reg,current_pgd)			;\
 168	tophys  (t1,reg)					;\
 169	l.lwz   reg,0(t1)
 170#endif
 171
 172/* Load r10 from current_thread_info_set - clobbers r1 and r30 */
 173#ifdef CONFIG_SMP
 174#define GET_CURRENT_THREAD_INFO					\
 175	LOAD_SYMBOL_2_GPR(r1,current_thread_info_set)		;\
 176	tophys  (r30,r1)					;\
 177	l.mfspr	r10,r0,SPR_COREID				;\
 178	l.slli	r10,r10,2					;\
 179	l.add	r30,r30,r10					;\
 180	/* r10: current_thread_info  */				;\
 181	l.lwz   r10,0(r30)
 182#else
 183#define GET_CURRENT_THREAD_INFO					\
 184	LOAD_SYMBOL_2_GPR(r1,current_thread_info_set)		;\
 185	tophys  (r30,r1)					;\
 186	/* r10: current_thread_info  */				;\
 187	l.lwz   r10,0(r30)
 188#endif
 189
 190/*
 191 * DSCR: this is a common hook for handling exceptions. it will save
 192 *       the needed registers, set up stack and pointer to current
 193 *	 then jump to the handler while enabling MMU
 194 *
 195 * PRMS: handler	- a function to jump to. it has to save the
 196 *			remaining registers to kernel stack, call
 197 *			appropriate arch-independant exception handler
 198 *			and finaly jump to ret_from_except
 199 *
 200 * PREQ: unchanged state from the time exception happened
 201 *
 202 * POST: SAVED the following registers original value
 203 *	       to the new created exception frame pointed to by r1
 204 *
 205 *	 r1  - ksp	pointing to the new (exception) frame
 206 *	 r4  - EEAR     exception EA
 207 *	 r10 - current	pointing to current_thread_info struct
 208 *	 r12 - syscall  0, since we didn't come from syscall
 209 *	 r30 - handler	address of the handler we'll jump to
 210 *
 211 *	 handler has to save remaining registers to the exception
 212 *	 ksp frame *before* tainting them!
 213 *
 214 * NOTE: this function is not reentrant per se. reentrancy is guaranteed
 215 *       by processor disabling all exceptions/interrupts when exception
 216 *	 accours.
 217 *
 218 * OPTM: no need to make it so wasteful to extract ksp when in user mode
 219 */
 220
 221#define EXCEPTION_HANDLE(handler)				\
 222	EXCEPTION_T_STORE_GPR30					;\
 223	l.mfspr r30,r0,SPR_ESR_BASE				;\
 224	l.andi  r30,r30,SPR_SR_SM				;\
 225	l.sfeqi r30,0						;\
 226	EXCEPTION_T_STORE_GPR10					;\
 227	l.bnf   2f                            /* kernel_mode */	;\
 228	 EXCEPTION_T_STORE_SP                 /* delay slot */	;\
 2291: /* user_mode:   */						;\
 230	GET_CURRENT_THREAD_INFO	 				;\
 231	tophys  (r30,r10)					;\
 232	l.lwz   r1,(TI_KSP)(r30)				;\
 233	/* fall through */					;\
 2342: /* kernel_mode: */						;\
 235	/* create new stack frame, save only needed gprs */	;\
 236	/* r1: KSP, r10: current, r4: EEAR, r31: __pa(KSP) */	;\
 237	/* r12:	temp, syscall indicator */			;\
 238	l.addi  r1,r1,-(INT_FRAME_SIZE)				;\
 239	/* r1 is KSP, r30 is __pa(KSP) */			;\
 240	tophys  (r30,r1)					;\
 241	l.sw    PT_GPR12(r30),r12				;\
 242	/* r4 use for tmp before EA */				;\
 243	l.mfspr r12,r0,SPR_EPCR_BASE				;\
 244	l.sw    PT_PC(r30),r12					;\
 245	l.mfspr r12,r0,SPR_ESR_BASE				;\
 246	l.sw    PT_SR(r30),r12					;\
 247	/* save r30 */						;\
 248	EXCEPTION_T_LOAD_GPR30(r12)				;\
 249	l.sw	PT_GPR30(r30),r12				;\
 250	/* save r10 as was prior to exception */		;\
 251	EXCEPTION_T_LOAD_GPR10(r12)				;\
 252	l.sw	PT_GPR10(r30),r12				;\
 253	/* save PT_SP as was prior to exception */		;\
 254	EXCEPTION_T_LOAD_SP(r12)				;\
 255	l.sw	PT_SP(r30),r12					;\
 256	/* save exception r4, set r4 = EA */			;\
 257	l.sw	PT_GPR4(r30),r4					;\
 258	l.mfspr r4,r0,SPR_EEAR_BASE				;\
 259	/* r12 == 1 if we come from syscall */			;\
 260	CLEAR_GPR(r12)						;\
 261	/* ----- turn on MMU ----- */				;\
 262	/* Carry DSX into exception SR */			;\
 263	l.mfspr r30,r0,SPR_SR					;\
 264	l.andi	r30,r30,SPR_SR_DSX				;\
 265	l.ori	r30,r30,(EXCEPTION_SR)				;\
 266	l.mtspr	r0,r30,SPR_ESR_BASE				;\
 267	/* r30:	EA address of handler */			;\
 268	LOAD_SYMBOL_2_GPR(r30,handler)				;\
 269	l.mtspr r0,r30,SPR_EPCR_BASE				;\
 270	l.rfe
 271
 272/*
 273 * this doesn't work
 274 *
 275 *
 276 * #ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
 277 * #define UNHANDLED_EXCEPTION(handler)				\
 278 *	l.ori   r3,r0,0x1					;\
 279 *	l.mtspr r0,r3,SPR_SR					;\
 280 *      l.movhi r3,hi(0xf0000100)				;\
 281 *      l.ori   r3,r3,lo(0xf0000100)				;\
 282 *	l.jr	r3						;\
 283 *	l.nop	1
 284 *
 285 * #endif
 286 */
 287
 288/* DSCR: this is the same as EXCEPTION_HANDLE(), we are just
 289 *       a bit more carefull (if we have a PT_SP or current pointer
 290 *       corruption) and set them up from 'current_set'
 291 *
 292 */
 293#define UNHANDLED_EXCEPTION(handler)				\
 294	EXCEPTION_T_STORE_GPR30					;\
 295	EXCEPTION_T_STORE_GPR10					;\
 296	EXCEPTION_T_STORE_SP					;\
 297	/* temporary store r3, r9 into r1, r10 */		;\
 298	l.addi	r1,r3,0x0					;\
 299	l.addi	r10,r9,0x0					;\
 300	LOAD_SYMBOL_2_GPR(r9,_string_unhandled_exception)	;\
 301	tophys	(r3,r9)						;\
 302	l.jal	_emergency_print				;\
 303	 l.nop							;\
 304	l.mfspr	r3,r0,SPR_NPC					;\
 305	l.jal	_emergency_print_nr				;\
 306	 l.andi	r3,r3,0x1f00					;\
 307	LOAD_SYMBOL_2_GPR(r9,_string_epc_prefix)		;\
 308	tophys	(r3,r9)						;\
 309	l.jal	_emergency_print				;\
 310	 l.nop							;\
 311	l.jal	_emergency_print_nr				;\
 312	 l.mfspr r3,r0,SPR_EPCR_BASE				;\
 313	LOAD_SYMBOL_2_GPR(r9,_string_nl)			;\
 314	tophys	(r3,r9)						;\
 315	l.jal	_emergency_print				;\
 316	 l.nop							;\
 317	/* end of printing */					;\
 318	l.addi	r3,r1,0x0					;\
 319	l.addi	r9,r10,0x0					;\
 320	/* extract current, ksp from current_set */		;\
 321	LOAD_SYMBOL_2_GPR(r1,_unhandled_stack_top)		;\
 322	LOAD_SYMBOL_2_GPR(r10,init_thread_union)		;\
 323	/* create new stack frame, save only needed gprs */	;\
 324	/* r1: KSP, r10: current, r31: __pa(KSP) */		;\
 325	/* r12:	temp, syscall indicator, r13 temp */		;\
 326	l.addi  r1,r1,-(INT_FRAME_SIZE)				;\
 327	/* r1 is KSP, r30 is __pa(KSP) */			;\
 328	tophys  (r30,r1)					;\
 329	l.sw    PT_GPR12(r30),r12					;\
 330	l.mfspr r12,r0,SPR_EPCR_BASE				;\
 331	l.sw    PT_PC(r30),r12					;\
 332	l.mfspr r12,r0,SPR_ESR_BASE				;\
 333	l.sw    PT_SR(r30),r12					;\
 334	/* save r31 */						;\
 335	EXCEPTION_T_LOAD_GPR30(r12)				;\
 336	l.sw	PT_GPR30(r30),r12					;\
 337	/* save r10 as was prior to exception */		;\
 338	EXCEPTION_T_LOAD_GPR10(r12)				;\
 339	l.sw	PT_GPR10(r30),r12					;\
 340	/* save PT_SP as was prior to exception */			;\
 341	EXCEPTION_T_LOAD_SP(r12)				;\
 342	l.sw	PT_SP(r30),r12					;\
 343	l.sw    PT_GPR13(r30),r13					;\
 344	/* --> */						;\
 345	/* save exception r4, set r4 = EA */			;\
 346	l.sw	PT_GPR4(r30),r4					;\
 347	l.mfspr r4,r0,SPR_EEAR_BASE				;\
 348	/* r12 == 1 if we come from syscall */			;\
 349	CLEAR_GPR(r12)						;\
 350	/* ----- play a MMU trick ----- */			;\
 351	l.ori	r30,r0,(EXCEPTION_SR)				;\
 352	l.mtspr	r0,r30,SPR_ESR_BASE				;\
 353	/* r31:	EA address of handler */			;\
 354	LOAD_SYMBOL_2_GPR(r30,handler)				;\
 355	l.mtspr r0,r30,SPR_EPCR_BASE				;\
 356	l.rfe
 357
 358/* =====================================================[ exceptions] === */
 359
 360/* ---[ 0x100: RESET exception ]----------------------------------------- */
 361    .org 0x100
 362	/* Jump to .init code at _start which lives in the .head section
 363	 * and will be discarded after boot.
 364	 */
 365	LOAD_SYMBOL_2_GPR(r15, _start)
 366	tophys	(r13,r15)			/* MMU disabled */
 367	l.jr	r13
 368	 l.nop
 369
 370/* ---[ 0x200: BUS exception ]------------------------------------------- */
 371    .org 0x200
 372_dispatch_bus_fault:
 373	EXCEPTION_HANDLE(_bus_fault_handler)
 374
 375/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
 376    .org 0x300
 377_dispatch_do_dpage_fault:
 378//      totaly disable timer interrupt
 379// 	l.mtspr	r0,r0,SPR_TTMR
 380//	DEBUG_TLB_PROBE(0x300)
 381//	EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x300)
 382	EXCEPTION_HANDLE(_data_page_fault_handler)
 383
 384/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
 385    .org 0x400
 386_dispatch_do_ipage_fault:
 387//      totaly disable timer interrupt
 388//	l.mtspr	r0,r0,SPR_TTMR
 389//	DEBUG_TLB_PROBE(0x400)
 390//	EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x400)
 391	EXCEPTION_HANDLE(_insn_page_fault_handler)
 392
 393/* ---[ 0x500: Timer exception ]----------------------------------------- */
 394    .org 0x500
 395	EXCEPTION_HANDLE(_timer_handler)
 396
 397/* ---[ 0x600: Alignment exception ]-------------------------------------- */
 398    .org 0x600
 399	EXCEPTION_HANDLE(_alignment_handler)
 400
 401/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
 402    .org 0x700
 403	EXCEPTION_HANDLE(_illegal_instruction_handler)
 404
 405/* ---[ 0x800: External interrupt exception ]---------------------------- */
 406    .org 0x800
 407	EXCEPTION_HANDLE(_external_irq_handler)
 408
 409/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
 410    .org 0x900
 411	l.j	boot_dtlb_miss_handler
 412	l.nop
 413
 414/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
 415    .org 0xa00
 416	l.j	boot_itlb_miss_handler
 417	l.nop
 418
 419/* ---[ 0xb00: Range exception ]----------------------------------------- */
 420    .org 0xb00
 421	UNHANDLED_EXCEPTION(_vector_0xb00)
 422
 423/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
 424    .org 0xc00
 425	EXCEPTION_HANDLE(_sys_call_handler)
 426
 427/* ---[ 0xd00: Trap exception ]------------------------------------------ */
 428    .org 0xd00
 429	UNHANDLED_EXCEPTION(_vector_0xd00)
 430
 431/* ---[ 0xe00: Trap exception ]------------------------------------------ */
 432    .org 0xe00
 433//	UNHANDLED_EXCEPTION(_vector_0xe00)
 434	EXCEPTION_HANDLE(_trap_handler)
 435
 436/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
 437    .org 0xf00
 438	UNHANDLED_EXCEPTION(_vector_0xf00)
 439
 440/* ---[ 0x1000: Reserved exception ]------------------------------------- */
 441    .org 0x1000
 442	UNHANDLED_EXCEPTION(_vector_0x1000)
 443
 444/* ---[ 0x1100: Reserved exception ]------------------------------------- */
 445    .org 0x1100
 446	UNHANDLED_EXCEPTION(_vector_0x1100)
 447
 448/* ---[ 0x1200: Reserved exception ]------------------------------------- */
 449    .org 0x1200
 450	UNHANDLED_EXCEPTION(_vector_0x1200)
 451
 452/* ---[ 0x1300: Reserved exception ]------------------------------------- */
 453    .org 0x1300
 454	UNHANDLED_EXCEPTION(_vector_0x1300)
 455
 456/* ---[ 0x1400: Reserved exception ]------------------------------------- */
 457    .org 0x1400
 458	UNHANDLED_EXCEPTION(_vector_0x1400)
 459
 460/* ---[ 0x1500: Reserved exception ]------------------------------------- */
 461    .org 0x1500
 462	UNHANDLED_EXCEPTION(_vector_0x1500)
 463
 464/* ---[ 0x1600: Reserved exception ]------------------------------------- */
 465    .org 0x1600
 466	UNHANDLED_EXCEPTION(_vector_0x1600)
 467
 468/* ---[ 0x1700: Reserved exception ]------------------------------------- */
 469    .org 0x1700
 470	UNHANDLED_EXCEPTION(_vector_0x1700)
 471
 472/* ---[ 0x1800: Reserved exception ]------------------------------------- */
 473    .org 0x1800
 474	UNHANDLED_EXCEPTION(_vector_0x1800)
 475
 476/* ---[ 0x1900: Reserved exception ]------------------------------------- */
 477    .org 0x1900
 478	UNHANDLED_EXCEPTION(_vector_0x1900)
 479
 480/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
 481    .org 0x1a00
 482	UNHANDLED_EXCEPTION(_vector_0x1a00)
 483
 484/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
 485    .org 0x1b00
 486	UNHANDLED_EXCEPTION(_vector_0x1b00)
 487
 488/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
 489    .org 0x1c00
 490	UNHANDLED_EXCEPTION(_vector_0x1c00)
 491
 492/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
 493    .org 0x1d00
 494	UNHANDLED_EXCEPTION(_vector_0x1d00)
 495
 496/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
 497    .org 0x1e00
 498	UNHANDLED_EXCEPTION(_vector_0x1e00)
 499
 500/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
 501    .org 0x1f00
 502	UNHANDLED_EXCEPTION(_vector_0x1f00)
 503
 504    .org 0x2000
 505/* ===================================================[ kernel start ]=== */
 506
 507/*    .text*/
 508
 509/* This early stuff belongs in HEAD, but some of the functions below definitely
 510 * don't... */
 511
 512	__HEAD
 513	.global _start
 514_start:
 515	/* Init r0 to zero as per spec */
 516	CLEAR_GPR(r0)
 517
 518	/* save kernel parameters */
 519	l.or	r25,r0,r3	/* pointer to fdt */
 520
 521	/*
 522	 * ensure a deterministic start
 523	 */
 524
 525	l.ori	r3,r0,0x1
 526	l.mtspr	r0,r3,SPR_SR
 527
 528	/*
 529	 * Start the TTCR as early as possible, so that the RNG can make use of
 530	 * measurements of boot time from the earliest opportunity. Especially
 531	 * important is that the TTCR does not return zero by the time we reach
 532	 * random_init().
 533	 */
 534	l.movhi r3,hi(SPR_TTMR_CR)
 535	l.mtspr r0,r3,SPR_TTMR
 536
 537	CLEAR_GPR(r1)
 538	CLEAR_GPR(r2)
 539	CLEAR_GPR(r3)
 540	CLEAR_GPR(r4)
 541	CLEAR_GPR(r5)
 542	CLEAR_GPR(r6)
 543	CLEAR_GPR(r7)
 544	CLEAR_GPR(r8)
 545	CLEAR_GPR(r9)
 546	CLEAR_GPR(r10)
 547	CLEAR_GPR(r11)
 548	CLEAR_GPR(r12)
 549	CLEAR_GPR(r13)
 550	CLEAR_GPR(r14)
 551	CLEAR_GPR(r15)
 552	CLEAR_GPR(r16)
 553	CLEAR_GPR(r17)
 554	CLEAR_GPR(r18)
 555	CLEAR_GPR(r19)
 556	CLEAR_GPR(r20)
 557	CLEAR_GPR(r21)
 558	CLEAR_GPR(r22)
 559	CLEAR_GPR(r23)
 560	CLEAR_GPR(r24)
 561	CLEAR_GPR(r26)
 562	CLEAR_GPR(r27)
 563	CLEAR_GPR(r28)
 564	CLEAR_GPR(r29)
 565	CLEAR_GPR(r30)
 566	CLEAR_GPR(r31)
 567
 568#ifdef CONFIG_SMP
 569	l.mfspr	r26,r0,SPR_COREID
 570	l.sfeq	r26,r0
 571	l.bnf	secondary_wait
 572	 l.nop
 573#endif
 574	/*
 575	 * set up initial ksp and current
 576	 */
 577	/* setup kernel stack */
 578	LOAD_SYMBOL_2_GPR(r1,init_thread_union + THREAD_SIZE)
 579	LOAD_SYMBOL_2_GPR(r10,init_thread_union)	// setup current
 580	tophys	(r31,r10)
 581	l.sw	TI_KSP(r31), r1
 582
 583	l.ori	r4,r0,0x0
 584
 585
 586	/*
 587	 * .data contains initialized data,
 588	 * .bss contains uninitialized data - clear it up
 589	 */
 590clear_bss:
 591	LOAD_SYMBOL_2_GPR(r24, __bss_start)
 592	LOAD_SYMBOL_2_GPR(r26, _end)
 593	tophys(r28,r24)
 594	tophys(r30,r26)
 595	CLEAR_GPR(r24)
 596	CLEAR_GPR(r26)
 5971:
 598	l.sw    (0)(r28),r0
 599	l.sfltu r28,r30
 600	l.bf    1b
 601	l.addi  r28,r28,4
 602
 603enable_ic:
 604	l.jal	_ic_enable
 605	 l.nop
 606
 607enable_dc:
 608	l.jal	_dc_enable
 609	 l.nop
 610
 611flush_tlb:
 612	l.jal	_flush_tlb
 613	 l.nop
 614
 615/* The MMU needs to be enabled before or1k_early_setup is called */
 616
 617enable_mmu:
 618	/*
 619	 * enable dmmu & immu
 620	 * SR[5] = 0, SR[6] = 0, 6th and 7th bit of SR set to 0
 621	 */
 622	l.mfspr	r30,r0,SPR_SR
 623	l.movhi	r28,hi(SPR_SR_DME | SPR_SR_IME)
 624	l.ori	r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
 625	l.or	r30,r30,r28
 626	l.mtspr	r0,r30,SPR_SR
 627	l.nop
 628	l.nop
 629	l.nop
 630	l.nop
 631	l.nop
 632	l.nop
 633	l.nop
 634	l.nop
 635	l.nop
 636	l.nop
 637	l.nop
 638	l.nop
 639	l.nop
 640	l.nop
 641	l.nop
 642	l.nop
 643
 644	// reset the simulation counters
 645	l.nop 5
 646
 647	/* check fdt header magic word */
 648	l.lwz	r3,0(r25)	/* load magic from fdt into r3 */
 649	l.movhi	r4,hi(OF_DT_HEADER)
 650	l.ori	r4,r4,lo(OF_DT_HEADER)
 651	l.sfeq	r3,r4
 652	l.bf	_fdt_found
 653	 l.nop
 654	/* magic number mismatch, set fdt pointer to null */
 655	l.or	r25,r0,r0
 656_fdt_found:
 657	/* pass fdt pointer to or1k_early_setup in r3 */
 658	l.or	r3,r0,r25
 659	LOAD_SYMBOL_2_GPR(r24, or1k_early_setup)
 660	l.jalr r24
 661	 l.nop
 662
 663clear_regs:
 664	/*
 665	 * clear all GPRS to increase determinism
 666	 */
 667	CLEAR_GPR(r2)
 668	CLEAR_GPR(r3)
 669	CLEAR_GPR(r4)
 670	CLEAR_GPR(r5)
 671	CLEAR_GPR(r6)
 672	CLEAR_GPR(r7)
 673	CLEAR_GPR(r8)
 674	CLEAR_GPR(r9)
 675	CLEAR_GPR(r11)
 676	CLEAR_GPR(r12)
 677	CLEAR_GPR(r13)
 678	CLEAR_GPR(r14)
 679	CLEAR_GPR(r15)
 680	CLEAR_GPR(r16)
 681	CLEAR_GPR(r17)
 682	CLEAR_GPR(r18)
 683	CLEAR_GPR(r19)
 684	CLEAR_GPR(r20)
 685	CLEAR_GPR(r21)
 686	CLEAR_GPR(r22)
 687	CLEAR_GPR(r23)
 688	CLEAR_GPR(r24)
 689	CLEAR_GPR(r25)
 690	CLEAR_GPR(r26)
 691	CLEAR_GPR(r27)
 692	CLEAR_GPR(r28)
 693	CLEAR_GPR(r29)
 694	CLEAR_GPR(r30)
 695	CLEAR_GPR(r31)
 696
 697jump_start_kernel:
 698	/*
 699	 * jump to kernel entry (start_kernel)
 700	 */
 701	LOAD_SYMBOL_2_GPR(r30, start_kernel)
 702	l.jr    r30
 703	 l.nop
 704
 705_flush_tlb:
 706	/*
 707	 *  I N V A L I D A T E   T L B   e n t r i e s
 708	 */
 709	LOAD_SYMBOL_2_GPR(r5,SPR_DTLBMR_BASE(0))
 710	LOAD_SYMBOL_2_GPR(r6,SPR_ITLBMR_BASE(0))
 711	l.addi	r7,r0,128 /* Maximum number of sets */
 7121:
 713	l.mtspr	r5,r0,0x0
 714	l.mtspr	r6,r0,0x0
 715
 716	l.addi	r5,r5,1
 717	l.addi	r6,r6,1
 718	l.sfeq	r7,r0
 719	l.bnf	1b
 720	 l.addi	r7,r7,-1
 721
 722	l.jr	r9
 723	 l.nop
 724
 725#ifdef CONFIG_SMP
 726secondary_wait:
 727	/* Doze the cpu until we are asked to run */
 728	/* If we dont have power management skip doze */
 729	l.mfspr r25,r0,SPR_UPR
 730	l.andi  r25,r25,SPR_UPR_PMP
 731	l.sfeq  r25,r0
 732	l.bf	secondary_check_release
 733	 l.nop
 734
 735	/* Setup special secondary exception handler */
 736	LOAD_SYMBOL_2_GPR(r3, _secondary_evbar)
 737	tophys(r25,r3)
 738	l.mtspr	r0,r25,SPR_EVBAR
 739
 740	/* Enable Interrupts */
 741	l.mfspr	r25,r0,SPR_SR
 742	l.ori	r25,r25,SPR_SR_IEE
 743	l.mtspr	r0,r25,SPR_SR
 744
 745	/* Unmask interrupts interrupts */
 746	l.mfspr r25,r0,SPR_PICMR
 747	l.ori   r25,r25,0xffff
 748	l.mtspr	r0,r25,SPR_PICMR
 749
 750	/* Doze */
 751	l.mfspr r25,r0,SPR_PMR
 752	LOAD_SYMBOL_2_GPR(r3, SPR_PMR_DME)
 753	l.or    r25,r25,r3
 754	l.mtspr r0,r25,SPR_PMR
 755
 756	/* Wakeup - Restore exception handler */
 757	l.mtspr	r0,r0,SPR_EVBAR
 758
 759secondary_check_release:
 760	/*
 761	 * Check if we actually got the release signal, if not go-back to
 762	 * sleep.
 763	 */
 764	l.mfspr	r25,r0,SPR_COREID
 765	LOAD_SYMBOL_2_GPR(r3, secondary_release)
 766	tophys(r4, r3)
 767	l.lwz	r3,0(r4)
 768	l.sfeq	r25,r3
 769	l.bnf	secondary_wait
 770	 l.nop
 771	/* fall through to secondary_init */
 772
 773secondary_init:
 774	/*
 775	 * set up initial ksp and current
 776	 */
 777	LOAD_SYMBOL_2_GPR(r10, secondary_thread_info)
 778	tophys	(r30,r10)
 779	l.lwz	r10,0(r30)
 780	l.addi	r1,r10,THREAD_SIZE
 781	tophys	(r30,r10)
 782	l.sw	TI_KSP(r30),r1
 783
 784	l.jal	_ic_enable
 785	 l.nop
 786
 787	l.jal	_dc_enable
 788	 l.nop
 789
 790	l.jal	_flush_tlb
 791	 l.nop
 792
 793	/*
 794	 * enable dmmu & immu
 795	 */
 796	l.mfspr	r30,r0,SPR_SR
 797	l.movhi	r28,hi(SPR_SR_DME | SPR_SR_IME)
 798	l.ori	r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
 799	l.or	r30,r30,r28
 800	/*
 801	 * This is a bit tricky, we need to switch over from physical addresses
 802	 * to virtual addresses on the fly.
 803	 * To do that, we first set up ESR with the IME and DME bits set.
 804	 * Then EPCR is set to secondary_start and then a l.rfe is issued to
 805	 * "jump" to that.
 806	 */
 807	l.mtspr	r0,r30,SPR_ESR_BASE
 808	LOAD_SYMBOL_2_GPR(r30, secondary_start)
 809	l.mtspr	r0,r30,SPR_EPCR_BASE
 810	l.rfe
 811
 812secondary_start:
 813	LOAD_SYMBOL_2_GPR(r30, secondary_start_kernel)
 814	l.jr    r30
 815	 l.nop
 816
 817#endif
 818
 819/* ========================================[ cache ]=== */
 820
 821	/* alignment here so we don't change memory offsets with
 822	 * memory controller defined
 823	 */
 824	.align 0x2000
 825
 826_ic_enable:
 827	/* Check if IC present and skip enabling otherwise */
 828	l.mfspr r24,r0,SPR_UPR
 829	l.andi  r26,r24,SPR_UPR_ICP
 830	l.sfeq  r26,r0
 831	l.bf	9f
 832	l.nop
 833
 834	/* Disable IC */
 835	l.mfspr r6,r0,SPR_SR
 836	l.addi  r5,r0,-1
 837	l.xori  r5,r5,SPR_SR_ICE
 838	l.and   r5,r6,r5
 839	l.mtspr r0,r5,SPR_SR
 840
 841	/* Establish cache block size
 842	   If BS=0, 16;
 843	   If BS=1, 32;
 844	   r14 contain block size
 845	*/
 846	l.mfspr r24,r0,SPR_ICCFGR
 847	l.andi	r26,r24,SPR_ICCFGR_CBS
 848	l.srli	r28,r26,7
 849	l.ori	r30,r0,16
 850	l.sll	r14,r30,r28
 851
 852	/* Establish number of cache sets
 853	   r16 contains number of cache sets
 854	   r28 contains log(# of cache sets)
 855	*/
 856	l.andi  r26,r24,SPR_ICCFGR_NCS
 857	l.srli 	r28,r26,3
 858	l.ori   r30,r0,1
 859	l.sll   r16,r30,r28
 860
 861	/* Invalidate IC */
 862	l.addi  r6,r0,0
 863	l.sll   r5,r14,r28
 864//        l.mul   r5,r14,r16
 865//	l.trap  1
 866//	l.addi  r5,r0,IC_SIZE
 8671:
 868	l.mtspr r0,r6,SPR_ICBIR
 869	l.sfne  r6,r5
 870	l.bf    1b
 871	l.add   r6,r6,r14
 872 //       l.addi   r6,r6,IC_LINE
 873
 874	/* Enable IC */
 875	l.mfspr r6,r0,SPR_SR
 876	l.ori   r6,r6,SPR_SR_ICE
 877	l.mtspr r0,r6,SPR_SR
 878	l.nop
 879	l.nop
 880	l.nop
 881	l.nop
 882	l.nop
 883	l.nop
 884	l.nop
 885	l.nop
 886	l.nop
 887	l.nop
 8889:
 889	l.jr    r9
 890	l.nop
 891
 892_dc_enable:
 893	/* Check if DC present and skip enabling otherwise */
 894	l.mfspr r24,r0,SPR_UPR
 895	l.andi  r26,r24,SPR_UPR_DCP
 896	l.sfeq  r26,r0
 897	l.bf	9f
 898	l.nop
 899
 900	/* Disable DC */
 901	l.mfspr r6,r0,SPR_SR
 902	l.addi  r5,r0,-1
 903	l.xori  r5,r5,SPR_SR_DCE
 904	l.and   r5,r6,r5
 905	l.mtspr r0,r5,SPR_SR
 906
 907	/* Establish cache block size
 908	   If BS=0, 16;
 909	   If BS=1, 32;
 910	   r14 contain block size
 911	*/
 912	l.mfspr r24,r0,SPR_DCCFGR
 913	l.andi	r26,r24,SPR_DCCFGR_CBS
 914	l.srli	r28,r26,7
 915	l.ori	r30,r0,16
 916	l.sll	r14,r30,r28
 917
 918	/* Establish number of cache sets
 919	   r16 contains number of cache sets
 920	   r28 contains log(# of cache sets)
 921	*/
 922	l.andi  r26,r24,SPR_DCCFGR_NCS
 923	l.srli 	r28,r26,3
 924	l.ori   r30,r0,1
 925	l.sll   r16,r30,r28
 926
 927	/* Invalidate DC */
 928	l.addi  r6,r0,0
 929	l.sll   r5,r14,r28
 9301:
 931	l.mtspr r0,r6,SPR_DCBIR
 932	l.sfne  r6,r5
 933	l.bf    1b
 934	l.add   r6,r6,r14
 935
 936	/* Enable DC */
 937	l.mfspr r6,r0,SPR_SR
 938	l.ori   r6,r6,SPR_SR_DCE
 939	l.mtspr r0,r6,SPR_SR
 9409:
 941	l.jr    r9
 942	l.nop
 943
 944/* ===============================================[ page table masks ]=== */
 945
 946#define DTLB_UP_CONVERT_MASK  0x3fa
 947#define ITLB_UP_CONVERT_MASK  0x3a
 948
 949/* for SMP we'd have (this is a bit subtle, CC must be always set
 950 * for SMP, but since we have _PAGE_PRESENT bit always defined
 951 * we can just modify the mask)
 952 */
 953#define DTLB_SMP_CONVERT_MASK  0x3fb
 954#define ITLB_SMP_CONVERT_MASK  0x3b
 955
 956/* ---[ boot dtlb miss handler ]----------------------------------------- */
 957
 958boot_dtlb_miss_handler:
 959
 960/* mask for DTLB_MR register: - (0) sets V (valid) bit,
 961 *                            - (31-12) sets bits belonging to VPN (31-12)
 962 */
 963#define DTLB_MR_MASK 0xfffff001
 964
 965/* mask for DTLB_TR register: - (2) sets CI (cache inhibit) bit,
 966 *			      - (4) sets A (access) bit,
 967 *                            - (5) sets D (dirty) bit,
 968 *                            - (8) sets SRE (superuser read) bit
 969 *                            - (9) sets SWE (superuser write) bit
 970 *                            - (31-12) sets bits belonging to VPN (31-12)
 971 */
 972#define DTLB_TR_MASK 0xfffff332
 973
 974/* These are for masking out the VPN/PPN value from the MR/TR registers...
 975 * it's not the same as the PFN */
 976#define VPN_MASK 0xfffff000
 977#define PPN_MASK 0xfffff000
 978
 979
 980	EXCEPTION_STORE_GPR6
 981
 982#if 0
 983	l.mfspr r6,r0,SPR_ESR_BASE	   //
 984	l.andi  r6,r6,SPR_SR_SM            // are we in kernel mode ?
 985	l.sfeqi r6,0                       // r6 == 0x1 --> SM
 986	l.bf    exit_with_no_dtranslation  //
 987	l.nop
 988#endif
 989
 990	/* this could be optimized by moving storing of
 991	 * non r6 registers here, and jumping r6 restore
 992	 * if not in supervisor mode
 993	 */
 994
 995	EXCEPTION_STORE_GPR2
 996	EXCEPTION_STORE_GPR3
 997	EXCEPTION_STORE_GPR4
 998	EXCEPTION_STORE_GPR5
 999
1000	l.mfspr r4,r0,SPR_EEAR_BASE        // get the offending EA
1001
1002immediate_translation:
1003	CLEAR_GPR(r6)
1004
1005	l.srli	r3,r4,0xd                  // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
1006
1007	l.mfspr r6, r0, SPR_DMMUCFGR
1008	l.andi	r6, r6, SPR_DMMUCFGR_NTS
1009	l.srli	r6, r6, SPR_DMMUCFGR_NTS_OFF
1010	l.ori	r5, r0, 0x1
1011	l.sll	r5, r5, r6 	// r5 = number DMMU sets
1012	l.addi	r6, r5, -1  	// r6 = nsets mask
1013	l.and	r2, r3, r6	// r2 <- r3 % NSETS_MASK
1014
1015	l.or    r6,r6,r4                   // r6 <- r4
1016	l.ori   r6,r6,~(VPN_MASK)          // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
1017	l.movhi r5,hi(DTLB_MR_MASK)        // r5 <- ffff:0000.x000
1018	l.ori   r5,r5,lo(DTLB_MR_MASK)     // r5 <- ffff:1111.x001 - apply DTLB_MR_MASK
1019	l.and   r5,r5,r6                   // r5 <- VPN :VPN .x001 - we have DTLBMR entry
1020	l.mtspr r2,r5,SPR_DTLBMR_BASE(0)   // set DTLBMR
1021
1022	/* set up DTLB with no translation for EA <= 0xbfffffff */
1023	LOAD_SYMBOL_2_GPR(r6,0xbfffffff)
1024	l.sfgeu  r6,r4                     // flag if r6 >= r4 (if 0xbfffffff >= EA)
1025	l.bf     1f                        // goto out
1026	l.and    r3,r4,r4                  // delay slot :: 24 <- r4 (if flag==1)
1027
1028	tophys(r3,r4)                      // r3 <- PA
10291:
1030	l.ori   r3,r3,~(PPN_MASK)          // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
1031	l.movhi r5,hi(DTLB_TR_MASK)        // r5 <- ffff:0000.x000
1032	l.ori   r5,r5,lo(DTLB_TR_MASK)     // r5 <- ffff:1111.x330 - apply DTLB_MR_MASK
1033	l.and   r5,r5,r3                   // r5 <- PPN :PPN .x330 - we have DTLBTR entry
1034	l.mtspr r2,r5,SPR_DTLBTR_BASE(0)   // set DTLBTR
1035
1036	EXCEPTION_LOAD_GPR6
1037	EXCEPTION_LOAD_GPR5
1038	EXCEPTION_LOAD_GPR4
1039	EXCEPTION_LOAD_GPR3
1040	EXCEPTION_LOAD_GPR2
1041
1042	l.rfe                              // SR <- ESR, PC <- EPC
1043
1044exit_with_no_dtranslation:
1045	/* EA out of memory or not in supervisor mode */
1046	EXCEPTION_LOAD_GPR6
1047	EXCEPTION_LOAD_GPR4
1048	l.j	_dispatch_bus_fault
1049
1050/* ---[ boot itlb miss handler ]----------------------------------------- */
1051
1052boot_itlb_miss_handler:
1053
1054/* mask for ITLB_MR register: - sets V (valid) bit,
1055 *                            - sets bits belonging to VPN (15-12)
1056 */
1057#define ITLB_MR_MASK 0xfffff001
1058
1059/* mask for ITLB_TR register: - sets A (access) bit,
1060 *                            - sets SXE (superuser execute) bit
1061 *                            - sets bits belonging to VPN (15-12)
1062 */
1063#define ITLB_TR_MASK 0xfffff050
1064
1065/*
1066#define VPN_MASK 0xffffe000
1067#define PPN_MASK 0xffffe000
1068*/
1069
1070
1071
1072	EXCEPTION_STORE_GPR2
1073	EXCEPTION_STORE_GPR3
1074	EXCEPTION_STORE_GPR4
1075	EXCEPTION_STORE_GPR5
1076	EXCEPTION_STORE_GPR6
1077
1078#if 0
1079	l.mfspr r6,r0,SPR_ESR_BASE         //
1080	l.andi  r6,r6,SPR_SR_SM            // are we in kernel mode ?
1081	l.sfeqi r6,0                       // r6 == 0x1 --> SM
1082	l.bf    exit_with_no_itranslation
1083	l.nop
1084#endif
1085
1086
1087	l.mfspr r4,r0,SPR_EEAR_BASE        // get the offending EA
1088
1089earlyearly:
1090	CLEAR_GPR(r6)
1091
1092	l.srli  r3,r4,0xd                  // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
1093
1094	l.mfspr r6, r0, SPR_IMMUCFGR
1095	l.andi	r6, r6, SPR_IMMUCFGR_NTS
1096	l.srli	r6, r6, SPR_IMMUCFGR_NTS_OFF
1097	l.ori	r5, r0, 0x1
1098	l.sll	r5, r5, r6 	// r5 = number IMMU sets from IMMUCFGR
1099	l.addi	r6, r5, -1  	// r6 = nsets mask
1100	l.and	r2, r3, r6	// r2 <- r3 % NSETS_MASK
1101
1102	l.or    r6,r6,r4                   // r6 <- r4
1103	l.ori   r6,r6,~(VPN_MASK)          // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
1104	l.movhi r5,hi(ITLB_MR_MASK)        // r5 <- ffff:0000.x000
1105	l.ori   r5,r5,lo(ITLB_MR_MASK)     // r5 <- ffff:1111.x001 - apply ITLB_MR_MASK
1106	l.and   r5,r5,r6                   // r5 <- VPN :VPN .x001 - we have ITLBMR entry
1107	l.mtspr r2,r5,SPR_ITLBMR_BASE(0)   // set ITLBMR
1108
1109	/*
1110	 * set up ITLB with no translation for EA <= 0x0fffffff
1111	 *
1112	 * we need this for head.S mapping (EA = PA). if we move all functions
1113	 * which run with mmu enabled into entry.S, we might be able to eliminate this.
1114	 *
1115	 */
1116	LOAD_SYMBOL_2_GPR(r6,0x0fffffff)
1117	l.sfgeu  r6,r4                     // flag if r6 >= r4 (if 0xb0ffffff >= EA)
1118	l.bf     1f                        // goto out
1119	l.and    r3,r4,r4                  // delay slot :: 24 <- r4 (if flag==1)
1120
1121	tophys(r3,r4)                      // r3 <- PA
11221:
1123	l.ori   r3,r3,~(PPN_MASK)          // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
1124	l.movhi r5,hi(ITLB_TR_MASK)        // r5 <- ffff:0000.x000
1125	l.ori   r5,r5,lo(ITLB_TR_MASK)     // r5 <- ffff:1111.x050 - apply ITLB_MR_MASK
1126	l.and   r5,r5,r3                   // r5 <- PPN :PPN .x050 - we have ITLBTR entry
1127	l.mtspr r2,r5,SPR_ITLBTR_BASE(0)   // set ITLBTR
1128
1129	EXCEPTION_LOAD_GPR6
1130	EXCEPTION_LOAD_GPR5
1131	EXCEPTION_LOAD_GPR4
1132	EXCEPTION_LOAD_GPR3
1133	EXCEPTION_LOAD_GPR2
1134
1135	l.rfe                              // SR <- ESR, PC <- EPC
1136
1137exit_with_no_itranslation:
1138	EXCEPTION_LOAD_GPR4
1139	EXCEPTION_LOAD_GPR6
1140	l.j    _dispatch_bus_fault
1141	l.nop
1142
1143/* ====================================================================== */
1144/*
1145 * Stuff below here shouldn't go into .head section... maybe this stuff
1146 * can be moved to entry.S ???
1147 */
1148
1149/* ==============================================[ DTLB miss handler ]=== */
1150
1151/*
1152 * Comments:
1153 *   Exception handlers are entered with MMU off so the following handler
1154 *   needs to use physical addressing
1155 *
1156 */
1157
1158	.text
1159ENTRY(dtlb_miss_handler)
1160	EXCEPTION_STORE_GPR2
1161	EXCEPTION_STORE_GPR3
1162	EXCEPTION_STORE_GPR4
1163	/*
1164	 * get EA of the miss
1165	 */
1166	l.mfspr	r2,r0,SPR_EEAR_BASE
1167	/*
1168	 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
1169	 */
1170	GET_CURRENT_PGD(r3,r4)		// r3 is current_pgd, r4 is temp
1171	l.srli	r4,r2,0x18		// >> PAGE_SHIFT + (PAGE_SHIFT - 2)
1172	l.slli	r4,r4,0x2		// to get address << 2
1173	l.add	r3,r4,r3		// r4 is pgd_index(daddr)
1174	/*
1175	 * if (pmd_none(*pmd))
1176	 *   goto pmd_none:
1177	 */
1178	tophys	(r4,r3)
1179	l.lwz	r3,0x0(r4)		// get *pmd value
1180	l.sfne	r3,r0
1181	l.bnf	d_pmd_none
1182	 l.addi	r3,r0,0xffffe000	// PAGE_MASK
1183
1184d_pmd_good:
1185	/*
1186	 * pte = *pte_offset(pmd, daddr);
1187	 */
1188	l.lwz	r4,0x0(r4)		// get **pmd value
1189	l.and	r4,r4,r3		// & PAGE_MASK
1190	l.srli	r2,r2,0xd		// >> PAGE_SHIFT, r2 == EEAR
1191	l.andi	r3,r2,0x7ff		// (1UL << PAGE_SHIFT - 2) - 1
1192	l.slli	r3,r3,0x2		// to get address << 2
1193	l.add	r3,r3,r4
1194	l.lwz	r3,0x0(r3)		// this is pte at last
1195	/*
1196	 * if (!pte_present(pte))
1197	 */
1198	l.andi	r4,r3,0x1
1199	l.sfne	r4,r0			// is pte present
1200	l.bnf	d_pte_not_present
1201	l.addi	r4,r0,0xffffe3fa	// PAGE_MASK | DTLB_UP_CONVERT_MASK
1202	/*
1203	 * fill DTLB TR register
1204	 */
1205	l.and	r4,r3,r4		// apply the mask
1206	// Determine number of DMMU sets
1207	l.mfspr r2, r0, SPR_DMMUCFGR
1208	l.andi	r2, r2, SPR_DMMUCFGR_NTS
1209	l.srli	r2, r2, SPR_DMMUCFGR_NTS_OFF
1210	l.ori	r3, r0, 0x1
1211	l.sll	r3, r3, r2 	// r3 = number DMMU sets DMMUCFGR
1212	l.addi	r2, r3, -1  	// r2 = nsets mask
1213	l.mfspr	r3, r0, SPR_EEAR_BASE
1214	l.srli	r3, r3, 0xd	// >> PAGE_SHIFT
1215	l.and	r2, r3, r2	// calc offset:	 & (NUM_TLB_ENTRIES-1)
1216	                                                   //NUM_TLB_ENTRIES
1217	l.mtspr	r2,r4,SPR_DTLBTR_BASE(0)
1218	/*
1219	 * fill DTLB MR register
1220	 */
1221	l.slli	r3, r3, 0xd		/* << PAGE_SHIFT => EA & PAGE_MASK */
1222	l.ori	r4,r3,0x1		// set hardware valid bit: DTBL_MR entry
1223	l.mtspr	r2,r4,SPR_DTLBMR_BASE(0)
1224
1225	EXCEPTION_LOAD_GPR2
1226	EXCEPTION_LOAD_GPR3
1227	EXCEPTION_LOAD_GPR4
1228	l.rfe
1229d_pmd_none:
1230d_pte_not_present:
1231	EXCEPTION_LOAD_GPR2
1232	EXCEPTION_LOAD_GPR3
1233	EXCEPTION_LOAD_GPR4
1234	EXCEPTION_HANDLE(_dtlb_miss_page_fault_handler)
1235
1236/* ==============================================[ ITLB miss handler ]=== */
1237ENTRY(itlb_miss_handler)
1238	EXCEPTION_STORE_GPR2
1239	EXCEPTION_STORE_GPR3
1240	EXCEPTION_STORE_GPR4
1241	/*
1242	 * get EA of the miss
1243	 */
1244	l.mfspr	r2,r0,SPR_EEAR_BASE
1245
1246	/*
1247	 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
1248	 *
1249	 */
1250	GET_CURRENT_PGD(r3,r4)		// r3 is current_pgd, r5 is temp
1251	l.srli	r4,r2,0x18		// >> PAGE_SHIFT + (PAGE_SHIFT - 2)
1252	l.slli	r4,r4,0x2		// to get address << 2
1253	l.add	r3,r4,r3		// r4 is pgd_index(daddr)
1254	/*
1255	 * if (pmd_none(*pmd))
1256	 *   goto pmd_none:
1257	 */
1258	tophys	(r4,r3)
1259	l.lwz	r3,0x0(r4)		// get *pmd value
1260	l.sfne	r3,r0
1261	l.bnf	i_pmd_none
1262	 l.addi	r3,r0,0xffffe000	// PAGE_MASK
1263
1264i_pmd_good:
1265	/*
1266	 * pte = *pte_offset(pmd, iaddr);
1267	 *
1268	 */
1269	l.lwz	r4,0x0(r4)		// get **pmd value
1270	l.and	r4,r4,r3		// & PAGE_MASK
1271	l.srli	r2,r2,0xd		// >> PAGE_SHIFT, r2 == EEAR
1272	l.andi	r3,r2,0x7ff		// (1UL << PAGE_SHIFT - 2) - 1
1273	l.slli	r3,r3,0x2		// to get address << 2
1274	l.add	r3,r3,r4
1275	l.lwz	r3,0x0(r3)		// this is pte at last
1276	/*
1277	 * if (!pte_present(pte))
1278	 *
1279	 */
1280	l.andi	r4,r3,0x1
1281	l.sfne	r4,r0			// is pte present
1282	l.bnf	i_pte_not_present
1283	 l.addi	r4,r0,0xffffe03a	// PAGE_MASK | ITLB_UP_CONVERT_MASK
1284	/*
1285	 * fill ITLB TR register
1286	 */
1287	l.and	r4,r3,r4		// apply the mask
1288	l.andi	r3,r3,0x7c0		// _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE |  _PAGE_URE | _PAGE_UWE
1289	l.sfeq	r3,r0
1290	l.bf	itlb_tr_fill //_workaround
1291	// Determine number of IMMU sets
1292	l.mfspr r2, r0, SPR_IMMUCFGR
1293	l.andi	r2, r2, SPR_IMMUCFGR_NTS
1294	l.srli	r2, r2, SPR_IMMUCFGR_NTS_OFF
1295	l.ori	r3, r0, 0x1
1296	l.sll	r3, r3, r2 	// r3 = number IMMU sets IMMUCFGR
1297	l.addi	r2, r3, -1  	// r2 = nsets mask
1298	l.mfspr	r3, r0, SPR_EEAR_BASE
1299	l.srli	r3, r3, 0xd	// >> PAGE_SHIFT
1300	l.and	r2, r3, r2	// calc offset:	 & (NUM_TLB_ENTRIES-1)
1301
1302/*
1303 * __PHX__ :: fixme
1304 * we should not just blindly set executable flags,
1305 * but it does help with ping. the clean way would be to find out
1306 * (and fix it) why stack doesn't have execution permissions
1307 */
1308
1309itlb_tr_fill_workaround:
1310	l.ori	r4,r4,0xc0		// | (SPR_ITLBTR_UXE | ITLBTR_SXE)
1311itlb_tr_fill:
1312	l.mtspr	r2,r4,SPR_ITLBTR_BASE(0)
1313	/*
1314	 * fill DTLB MR register
1315	 */
1316	l.slli	r3, r3, 0xd		/* << PAGE_SHIFT => EA & PAGE_MASK */
1317	l.ori	r4,r3,0x1		// set hardware valid bit: ITBL_MR entry
1318	l.mtspr	r2,r4,SPR_ITLBMR_BASE(0)
1319
1320	EXCEPTION_LOAD_GPR2
1321	EXCEPTION_LOAD_GPR3
1322	EXCEPTION_LOAD_GPR4
1323	l.rfe
1324
1325i_pmd_none:
1326i_pte_not_present:
1327	EXCEPTION_LOAD_GPR2
1328	EXCEPTION_LOAD_GPR3
1329	EXCEPTION_LOAD_GPR4
1330	EXCEPTION_HANDLE(_itlb_miss_page_fault_handler)
1331
1332/* ==============================================[ boot tlb handlers ]=== */
1333
1334
1335/* =================================================[ debugging aids ]=== */
1336
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1337/*
1338 * DESC: Prints ASCII character stored in r7
1339 *
1340 * PRMS: r7	- a 32-bit value with an ASCII character in the first byte
1341 *		position.
1342 *
1343 * PREQ: The UART at UART_BASE_ADD has to be initialized
1344 *
1345 * POST: internally used but restores:
1346 * 	 r4	- to store UART_BASE_ADD
1347 *	 r5	- for loading OFF_TXFULL / THRE,TEMT
1348 *	 r6	- for storing bitmask (SERIAL_8250)
1349 */
1350ENTRY(_emergency_putc)
1351	EMERGENCY_PRINT_STORE_GPR4
1352	EMERGENCY_PRINT_STORE_GPR5
1353	EMERGENCY_PRINT_STORE_GPR6
 
 
 
 
 
 
1354
 
1355	l.movhi r4,hi(UART_BASE_ADD)
1356	l.ori	r4,r4,lo(UART_BASE_ADD)
1357
1358#if defined(CONFIG_SERIAL_LITEUART)
1359	/* Check OFF_TXFULL status */
13601:      l.lwz	r5,4(r4)
1361	l.andi	r5,r5,0xff
1362	l.sfnei	r5,0
1363	l.bf	1b
1364	 l.nop
1365
1366	/* Write character */
1367	l.andi	r7,r7,0xff
1368	l.sw	0(r4),r7
1369#elif defined(CONFIG_SERIAL_8250)
1370	/* Check UART LSR THRE (hold) bit */
1371	l.addi  r6,r0,0x20
13721:      l.lbz   r5,5(r4)
1373	l.andi  r5,r5,0x20
1374	l.sfeq  r5,r6
1375	l.bnf   1b
1376	 l.nop
1377
1378	/* Write character */
1379	l.sb    0(r4),r7
1380
1381	/* Check UART LSR THRE|TEMT (hold, empty) bits */
1382	l.addi  r6,r0,0x60
13831:      l.lbz   r5,5(r4)
1384	l.andi  r5,r5,0x60
1385	l.sfeq  r5,r6
1386	l.bnf   1b
1387	 l.nop
1388#endif
1389	EMERGENCY_PRINT_LOAD_GPR6
1390	EMERGENCY_PRINT_LOAD_GPR5
1391	EMERGENCY_PRINT_LOAD_GPR4
1392	l.jr	r9
1393	 l.nop
1394
1395/*
1396 * DSCR: prints a string referenced by r3.
1397 *
1398 * PRMS: r3     	- address of the first character of null
1399 *			terminated string to be printed
1400 *
1401 * PREQ: UART at UART_BASE_ADD has to be initialized
1402 *
1403 * POST: caller should be aware that r3, r9 are changed
1404 */
1405ENTRY(_emergency_print)
1406	EMERGENCY_PRINT_STORE_GPR7
1407	EMERGENCY_PRINT_STORE_GPR9
1408
1409	/* Load character to r7, check for null terminator */
14102:	l.lbz	r7,0(r3)
1411	l.sfeqi	r7,0x0
1412	l.bf	9f
1413	 l.nop
1414
1415	l.jal	_emergency_putc
1416	 l.nop
1417
1418	/* next character */
1419	l.j	2b
1420	 l.addi	r3,r3,0x1
1421
14229:
1423	EMERGENCY_PRINT_LOAD_GPR9
1424	EMERGENCY_PRINT_LOAD_GPR7
 
 
 
1425	l.jr	r9
1426	 l.nop
1427
1428/*
1429 * DSCR: prints a number in r3 in hex.
1430 *
1431 * PRMS: r3     	- a 32-bit unsigned integer
1432 *
1433 * PREQ: UART at UART_BASE_ADD has to be initialized
1434 *
1435 * POST: caller should be aware that r3, r9 are changed
1436 */
1437ENTRY(_emergency_print_nr)
 
 
 
1438	EMERGENCY_PRINT_STORE_GPR7
1439	EMERGENCY_PRINT_STORE_GPR8
1440	EMERGENCY_PRINT_STORE_GPR9
1441
1442	l.addi	r8,r0,32		// shift register
1443
14441:	/* remove leading zeros */
1445	l.addi	r8,r8,-0x4
1446	l.srl	r7,r3,r8
1447	l.andi	r7,r7,0xf
1448
1449	/* don't skip the last zero if number == 0x0 */
1450	l.sfeqi	r8,0x4
1451	l.bf	2f
1452	 l.nop
1453
1454	l.sfeq	r7,r0
1455	l.bf	1b
1456	 l.nop
1457
14582:
1459	l.srl	r7,r3,r8
1460
1461	l.andi	r7,r7,0xf
1462	l.sflts	r8,r0
1463	 l.bf	9f
1464
1465	/* Numbers greater than 9 translate to a-f */
1466	l.sfgtui r7,0x9
1467	l.bnf	8f
1468	 l.nop
1469	l.addi	r7,r7,0x27
1470
1471	/* Convert to ascii and output character */
14728:	l.jal	_emergency_putc
1473	 l.addi	r7,r7,0x30
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1474
1475	/* next character */
1476	l.j	2b
1477	l.addi	r8,r8,-0x4
1478
14799:
1480	EMERGENCY_PRINT_LOAD_GPR9
1481	EMERGENCY_PRINT_LOAD_GPR8
1482	EMERGENCY_PRINT_LOAD_GPR7
 
 
 
1483	l.jr	r9
1484	 l.nop
 
1485
1486/*
1487 * This should be used for debugging only.
1488 * It messes up the Linux early serial output
1489 * somehow, so use it sparingly and essentially
1490 * only if you need to debug something that goes wrong
1491 * before Linux gets the early serial going.
1492 *
1493 * Furthermore, you'll have to make sure you set the
1494 * UART_DEVISOR correctly according to the system
1495 * clock rate.
1496 *
1497 *
1498 */
1499
1500
1501
1502#define SYS_CLK            20000000
1503//#define SYS_CLK            1843200
1504#define OR32_CONSOLE_BAUD  115200
1505#define UART_DIVISOR       SYS_CLK/(16*OR32_CONSOLE_BAUD)
1506
1507ENTRY(_early_uart_init)
1508	l.movhi	r3,hi(UART_BASE_ADD)
1509	l.ori	r3,r3,lo(UART_BASE_ADD)
1510
1511#if defined(CONFIG_SERIAL_8250)
1512	l.addi	r4,r0,0x7
1513	l.sb	0x2(r3),r4
1514
1515	l.addi	r4,r0,0x0
1516	l.sb	0x1(r3),r4
1517
1518	l.addi	r4,r0,0x3
1519	l.sb	0x3(r3),r4
1520
1521	l.lbz	r5,3(r3)
1522	l.ori	r4,r5,0x80
1523	l.sb	0x3(r3),r4
1524	l.addi	r4,r0,((UART_DIVISOR>>8) & 0x000000ff)
1525	l.sb	UART_DLM(r3),r4
1526	l.addi  r4,r0,((UART_DIVISOR) & 0x000000ff)
1527	l.sb	UART_DLL(r3),r4
1528	l.sb	0x3(r3),r5
1529#endif
1530
1531	l.jr	r9
1532	 l.nop
1533
1534	.align	0x1000
1535	.global _secondary_evbar
1536_secondary_evbar:
1537
1538	.space 0x800
1539	/* Just disable interrupts and Return */
1540	l.ori	r3,r0,SPR_SR_SM
1541	l.mtspr	r0,r3,SPR_ESR_BASE
1542	l.rfe
1543
1544
1545	.section .rodata
1546_string_unhandled_exception:
1547	.string "\r\nRunarunaround: Unhandled exception 0x\0"
1548
1549_string_epc_prefix:
1550	.string ": EPC=0x\0"
1551
1552_string_nl:
1553	.string "\r\n\0"
1554
1555
1556/* ========================================[ page aligned structures ]=== */
1557
1558/*
1559 * .data section should be page aligned
1560 *	(look into arch/openrisc/kernel/vmlinux.lds.S)
1561 */
1562	.section .data,"aw"
1563	.align	8192
1564	.global  empty_zero_page
1565empty_zero_page:
1566	.space  8192
1567
1568	.global  swapper_pg_dir
1569swapper_pg_dir:
1570	.space  8192
1571
1572	.global	_unhandled_stack
1573_unhandled_stack:
1574	.space	8192
1575_unhandled_stack_top:
1576
1577/* ============================================================[ EOF ]=== */