Loading...
1/*
2 * Copyright (c) 2016 Intel Corporation
3 *
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
13 *
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 * OF THIS SOFTWARE.
21 */
22
23#ifndef __DRM_PLANE_H__
24#define __DRM_PLANE_H__
25
26#include <linux/list.h>
27#include <linux/ctype.h>
28#include <drm/drm_mode_object.h>
29#include <drm/drm_color_mgmt.h>
30#include <drm/drm_rect.h>
31#include <drm/drm_modeset_lock.h>
32#include <drm/drm_util.h>
33
34struct drm_crtc;
35struct drm_printer;
36struct drm_modeset_acquire_ctx;
37
38enum drm_scaling_filter {
39 DRM_SCALING_FILTER_DEFAULT,
40 DRM_SCALING_FILTER_NEAREST_NEIGHBOR,
41};
42
43/**
44 * struct drm_plane_state - mutable plane state
45 *
46 * Please note that the destination coordinates @crtc_x, @crtc_y, @crtc_h and
47 * @crtc_w and the source coordinates @src_x, @src_y, @src_h and @src_w are the
48 * raw coordinates provided by userspace. Drivers should use
49 * drm_atomic_helper_check_plane_state() and only use the derived rectangles in
50 * @src and @dst to program the hardware.
51 */
52struct drm_plane_state {
53 /** @plane: backpointer to the plane */
54 struct drm_plane *plane;
55
56 /**
57 * @crtc:
58 *
59 * Currently bound CRTC, NULL if disabled. Do not this write directly,
60 * use drm_atomic_set_crtc_for_plane()
61 */
62 struct drm_crtc *crtc;
63
64 /**
65 * @fb:
66 *
67 * Currently bound framebuffer. Do not write this directly, use
68 * drm_atomic_set_fb_for_plane()
69 */
70 struct drm_framebuffer *fb;
71
72 /**
73 * @fence:
74 *
75 * Optional fence to wait for before scanning out @fb. The core atomic
76 * code will set this when userspace is using explicit fencing. Do not
77 * write this field directly for a driver's implicit fence.
78 *
79 * Drivers should store any implicit fence in this from their
80 * &drm_plane_helper_funcs.prepare_fb callback. See drm_gem_plane_helper_prepare_fb()
81 * and drm_gem_simple_display_pipe_prepare_fb() for suitable helpers.
82 */
83 struct dma_fence *fence;
84
85 /**
86 * @crtc_x:
87 *
88 * Left position of visible portion of plane on crtc, signed dest
89 * location allows it to be partially off screen.
90 */
91
92 int32_t crtc_x;
93 /**
94 * @crtc_y:
95 *
96 * Upper position of visible portion of plane on crtc, signed dest
97 * location allows it to be partially off screen.
98 */
99 int32_t crtc_y;
100
101 /** @crtc_w: width of visible portion of plane on crtc */
102 /** @crtc_h: height of visible portion of plane on crtc */
103 uint32_t crtc_w, crtc_h;
104
105 /**
106 * @src_x: left position of visible portion of plane within plane (in
107 * 16.16 fixed point).
108 */
109 uint32_t src_x;
110 /**
111 * @src_y: upper position of visible portion of plane within plane (in
112 * 16.16 fixed point).
113 */
114 uint32_t src_y;
115 /** @src_w: width of visible portion of plane (in 16.16) */
116 /** @src_h: height of visible portion of plane (in 16.16) */
117 uint32_t src_h, src_w;
118
119 /**
120 * @alpha:
121 * Opacity of the plane with 0 as completely transparent and 0xffff as
122 * completely opaque. See drm_plane_create_alpha_property() for more
123 * details.
124 */
125 u16 alpha;
126
127 /**
128 * @pixel_blend_mode:
129 * The alpha blending equation selection, describing how the pixels from
130 * the current plane are composited with the background. Value can be
131 * one of DRM_MODE_BLEND_*
132 */
133 uint16_t pixel_blend_mode;
134
135 /**
136 * @rotation:
137 * Rotation of the plane. See drm_plane_create_rotation_property() for
138 * more details.
139 */
140 unsigned int rotation;
141
142 /**
143 * @zpos:
144 * Priority of the given plane on crtc (optional).
145 *
146 * User-space may set mutable zpos properties so that multiple active
147 * planes on the same CRTC have identical zpos values. This is a
148 * user-space bug, but drivers can solve the conflict by comparing the
149 * plane object IDs; the plane with a higher ID is stacked on top of a
150 * plane with a lower ID.
151 *
152 * See drm_plane_create_zpos_property() and
153 * drm_plane_create_zpos_immutable_property() for more details.
154 */
155 unsigned int zpos;
156
157 /**
158 * @normalized_zpos:
159 * Normalized value of zpos: unique, range from 0 to N-1 where N is the
160 * number of active planes for given crtc. Note that the driver must set
161 * &drm_mode_config.normalize_zpos or call drm_atomic_normalize_zpos() to
162 * update this before it can be trusted.
163 */
164 unsigned int normalized_zpos;
165
166 /**
167 * @color_encoding:
168 *
169 * Color encoding for non RGB formats
170 */
171 enum drm_color_encoding color_encoding;
172
173 /**
174 * @color_range:
175 *
176 * Color range for non RGB formats
177 */
178 enum drm_color_range color_range;
179
180 /**
181 * @fb_damage_clips:
182 *
183 * Blob representing damage (area in plane framebuffer that changed
184 * since last plane update) as an array of &drm_mode_rect in framebuffer
185 * coodinates of the attached framebuffer. Note that unlike plane src,
186 * damage clips are not in 16.16 fixed point.
187 *
188 * See drm_plane_get_damage_clips() and
189 * drm_plane_get_damage_clips_count() for accessing these.
190 */
191 struct drm_property_blob *fb_damage_clips;
192
193 /**
194 * @src:
195 *
196 * source coordinates of the plane (in 16.16).
197 *
198 * When using drm_atomic_helper_check_plane_state(),
199 * the coordinates are clipped, but the driver may choose
200 * to use unclipped coordinates instead when the hardware
201 * performs the clipping automatically.
202 */
203 /**
204 * @dst:
205 *
206 * clipped destination coordinates of the plane.
207 *
208 * When using drm_atomic_helper_check_plane_state(),
209 * the coordinates are clipped, but the driver may choose
210 * to use unclipped coordinates instead when the hardware
211 * performs the clipping automatically.
212 */
213 struct drm_rect src, dst;
214
215 /**
216 * @visible:
217 *
218 * Visibility of the plane. This can be false even if fb!=NULL and
219 * crtc!=NULL, due to clipping.
220 */
221 bool visible;
222
223 /**
224 * @scaling_filter:
225 *
226 * Scaling filter to be applied
227 */
228 enum drm_scaling_filter scaling_filter;
229
230 /**
231 * @commit: Tracks the pending commit to prevent use-after-free conditions,
232 * and for async plane updates.
233 *
234 * May be NULL.
235 */
236 struct drm_crtc_commit *commit;
237
238 /** @state: backpointer to global drm_atomic_state */
239 struct drm_atomic_state *state;
240};
241
242static inline struct drm_rect
243drm_plane_state_src(const struct drm_plane_state *state)
244{
245 struct drm_rect src = {
246 .x1 = state->src_x,
247 .y1 = state->src_y,
248 .x2 = state->src_x + state->src_w,
249 .y2 = state->src_y + state->src_h,
250 };
251 return src;
252}
253
254static inline struct drm_rect
255drm_plane_state_dest(const struct drm_plane_state *state)
256{
257 struct drm_rect dest = {
258 .x1 = state->crtc_x,
259 .y1 = state->crtc_y,
260 .x2 = state->crtc_x + state->crtc_w,
261 .y2 = state->crtc_y + state->crtc_h,
262 };
263 return dest;
264}
265
266/**
267 * struct drm_plane_funcs - driver plane control functions
268 */
269struct drm_plane_funcs {
270 /**
271 * @update_plane:
272 *
273 * This is the legacy entry point to enable and configure the plane for
274 * the given CRTC and framebuffer. It is never called to disable the
275 * plane, i.e. the passed-in crtc and fb paramters are never NULL.
276 *
277 * The source rectangle in frame buffer memory coordinates is given by
278 * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
279 * values). Devices that don't support subpixel plane coordinates can
280 * ignore the fractional part.
281 *
282 * The destination rectangle in CRTC coordinates is given by the
283 * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
284 * Devices scale the source rectangle to the destination rectangle. If
285 * scaling is not supported, and the source rectangle size doesn't match
286 * the destination rectangle size, the driver must return a
287 * -<errorname>EINVAL</errorname> error.
288 *
289 * Drivers implementing atomic modeset should use
290 * drm_atomic_helper_update_plane() to implement this hook.
291 *
292 * RETURNS:
293 *
294 * 0 on success or a negative error code on failure.
295 */
296 int (*update_plane)(struct drm_plane *plane,
297 struct drm_crtc *crtc, struct drm_framebuffer *fb,
298 int crtc_x, int crtc_y,
299 unsigned int crtc_w, unsigned int crtc_h,
300 uint32_t src_x, uint32_t src_y,
301 uint32_t src_w, uint32_t src_h,
302 struct drm_modeset_acquire_ctx *ctx);
303
304 /**
305 * @disable_plane:
306 *
307 * This is the legacy entry point to disable the plane. The DRM core
308 * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call
309 * with the frame buffer ID set to 0. Disabled planes must not be
310 * processed by the CRTC.
311 *
312 * Drivers implementing atomic modeset should use
313 * drm_atomic_helper_disable_plane() to implement this hook.
314 *
315 * RETURNS:
316 *
317 * 0 on success or a negative error code on failure.
318 */
319 int (*disable_plane)(struct drm_plane *plane,
320 struct drm_modeset_acquire_ctx *ctx);
321
322 /**
323 * @destroy:
324 *
325 * Clean up plane resources. This is only called at driver unload time
326 * through drm_mode_config_cleanup() since a plane cannot be hotplugged
327 * in DRM.
328 */
329 void (*destroy)(struct drm_plane *plane);
330
331 /**
332 * @reset:
333 *
334 * Reset plane hardware and software state to off. This function isn't
335 * called by the core directly, only through drm_mode_config_reset().
336 * It's not a helper hook only for historical reasons.
337 *
338 * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
339 * atomic state using this hook.
340 */
341 void (*reset)(struct drm_plane *plane);
342
343 /**
344 * @set_property:
345 *
346 * This is the legacy entry point to update a property attached to the
347 * plane.
348 *
349 * This callback is optional if the driver does not support any legacy
350 * driver-private properties. For atomic drivers it is not used because
351 * property handling is done entirely in the DRM core.
352 *
353 * RETURNS:
354 *
355 * 0 on success or a negative error code on failure.
356 */
357 int (*set_property)(struct drm_plane *plane,
358 struct drm_property *property, uint64_t val);
359
360 /**
361 * @atomic_duplicate_state:
362 *
363 * Duplicate the current atomic state for this plane and return it.
364 * The core and helpers guarantee that any atomic state duplicated with
365 * this hook and still owned by the caller (i.e. not transferred to the
366 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
367 * cleaned up by calling the @atomic_destroy_state hook in this
368 * structure.
369 *
370 * This callback is mandatory for atomic drivers.
371 *
372 * Atomic drivers which don't subclass &struct drm_plane_state should use
373 * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
374 * state structure to extend it with driver-private state should use
375 * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
376 * duplicated in a consistent fashion across drivers.
377 *
378 * It is an error to call this hook before &drm_plane.state has been
379 * initialized correctly.
380 *
381 * NOTE:
382 *
383 * If the duplicate state references refcounted resources this hook must
384 * acquire a reference for each of them. The driver must release these
385 * references again in @atomic_destroy_state.
386 *
387 * RETURNS:
388 *
389 * Duplicated atomic state or NULL when the allocation failed.
390 */
391 struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
392
393 /**
394 * @atomic_destroy_state:
395 *
396 * Destroy a state duplicated with @atomic_duplicate_state and release
397 * or unreference all resources it references
398 *
399 * This callback is mandatory for atomic drivers.
400 */
401 void (*atomic_destroy_state)(struct drm_plane *plane,
402 struct drm_plane_state *state);
403
404 /**
405 * @atomic_set_property:
406 *
407 * Decode a driver-private property value and store the decoded value
408 * into the passed-in state structure. Since the atomic core decodes all
409 * standardized properties (even for extensions beyond the core set of
410 * properties which might not be implemented by all drivers) this
411 * requires drivers to subclass the state structure.
412 *
413 * Such driver-private properties should really only be implemented for
414 * truly hardware/vendor specific state. Instead it is preferred to
415 * standardize atomic extension and decode the properties used to expose
416 * such an extension in the core.
417 *
418 * Do not call this function directly, use
419 * drm_atomic_plane_set_property() instead.
420 *
421 * This callback is optional if the driver does not support any
422 * driver-private atomic properties.
423 *
424 * NOTE:
425 *
426 * This function is called in the state assembly phase of atomic
427 * modesets, which can be aborted for any reason (including on
428 * userspace's request to just check whether a configuration would be
429 * possible). Drivers MUST NOT touch any persistent state (hardware or
430 * software) or data structures except the passed in @state parameter.
431 *
432 * Also since userspace controls in which order properties are set this
433 * function must not do any input validation (since the state update is
434 * incomplete and hence likely inconsistent). Instead any such input
435 * validation must be done in the various atomic_check callbacks.
436 *
437 * RETURNS:
438 *
439 * 0 if the property has been found, -EINVAL if the property isn't
440 * implemented by the driver (which shouldn't ever happen, the core only
441 * asks for properties attached to this plane). No other validation is
442 * allowed by the driver. The core already checks that the property
443 * value is within the range (integer, valid enum value, ...) the driver
444 * set when registering the property.
445 */
446 int (*atomic_set_property)(struct drm_plane *plane,
447 struct drm_plane_state *state,
448 struct drm_property *property,
449 uint64_t val);
450
451 /**
452 * @atomic_get_property:
453 *
454 * Reads out the decoded driver-private property. This is used to
455 * implement the GETPLANE IOCTL.
456 *
457 * Do not call this function directly, use
458 * drm_atomic_plane_get_property() instead.
459 *
460 * This callback is optional if the driver does not support any
461 * driver-private atomic properties.
462 *
463 * RETURNS:
464 *
465 * 0 on success, -EINVAL if the property isn't implemented by the
466 * driver (which should never happen, the core only asks for
467 * properties attached to this plane).
468 */
469 int (*atomic_get_property)(struct drm_plane *plane,
470 const struct drm_plane_state *state,
471 struct drm_property *property,
472 uint64_t *val);
473 /**
474 * @late_register:
475 *
476 * This optional hook can be used to register additional userspace
477 * interfaces attached to the plane like debugfs interfaces.
478 * It is called late in the driver load sequence from drm_dev_register().
479 * Everything added from this callback should be unregistered in
480 * the early_unregister callback.
481 *
482 * Returns:
483 *
484 * 0 on success, or a negative error code on failure.
485 */
486 int (*late_register)(struct drm_plane *plane);
487
488 /**
489 * @early_unregister:
490 *
491 * This optional hook should be used to unregister the additional
492 * userspace interfaces attached to the plane from
493 * @late_register. It is called from drm_dev_unregister(),
494 * early in the driver unload sequence to disable userspace access
495 * before data structures are torndown.
496 */
497 void (*early_unregister)(struct drm_plane *plane);
498
499 /**
500 * @atomic_print_state:
501 *
502 * If driver subclasses &struct drm_plane_state, it should implement
503 * this optional hook for printing additional driver specific state.
504 *
505 * Do not call this directly, use drm_atomic_plane_print_state()
506 * instead.
507 */
508 void (*atomic_print_state)(struct drm_printer *p,
509 const struct drm_plane_state *state);
510
511 /**
512 * @format_mod_supported:
513 *
514 * This optional hook is used for the DRM to determine if the given
515 * format/modifier combination is valid for the plane. This allows the
516 * DRM to generate the correct format bitmask (which formats apply to
517 * which modifier), and to validate modifiers at atomic_check time.
518 *
519 * If not present, then any modifier in the plane's modifier
520 * list is allowed with any of the plane's formats.
521 *
522 * Returns:
523 *
524 * True if the given modifier is valid for that format on the plane.
525 * False otherwise.
526 */
527 bool (*format_mod_supported)(struct drm_plane *plane, uint32_t format,
528 uint64_t modifier);
529};
530
531/**
532 * enum drm_plane_type - uapi plane type enumeration
533 *
534 * For historical reasons not all planes are made the same. This enumeration is
535 * used to tell the different types of planes apart to implement the different
536 * uapi semantics for them. For userspace which is universal plane aware and
537 * which is using that atomic IOCTL there's no difference between these planes
538 * (beyong what the driver and hardware can support of course).
539 *
540 * For compatibility with legacy userspace, only overlay planes are made
541 * available to userspace by default. Userspace clients may set the
542 * &DRM_CLIENT_CAP_UNIVERSAL_PLANES client capability bit to indicate that they
543 * wish to receive a universal plane list containing all plane types. See also
544 * drm_for_each_legacy_plane().
545 *
546 * In addition to setting each plane's type, drivers need to setup the
547 * &drm_crtc.primary and optionally &drm_crtc.cursor pointers for legacy
548 * IOCTLs. See drm_crtc_init_with_planes().
549 *
550 * WARNING: The values of this enum is UABI since they're exposed in the "type"
551 * property.
552 */
553enum drm_plane_type {
554 /**
555 * @DRM_PLANE_TYPE_OVERLAY:
556 *
557 * Overlay planes represent all non-primary, non-cursor planes. Some
558 * drivers refer to these types of planes as "sprites" internally.
559 */
560 DRM_PLANE_TYPE_OVERLAY,
561
562 /**
563 * @DRM_PLANE_TYPE_PRIMARY:
564 *
565 * A primary plane attached to a CRTC is the most likely to be able to
566 * light up the CRTC when no scaling/cropping is used and the plane
567 * covers the whole CRTC.
568 */
569 DRM_PLANE_TYPE_PRIMARY,
570
571 /**
572 * @DRM_PLANE_TYPE_CURSOR:
573 *
574 * A cursor plane attached to a CRTC is more likely to be able to be
575 * enabled when no scaling/cropping is used and the framebuffer has the
576 * size indicated by &drm_mode_config.cursor_width and
577 * &drm_mode_config.cursor_height. Additionally, if the driver doesn't
578 * support modifiers, the framebuffer should have a linear layout.
579 */
580 DRM_PLANE_TYPE_CURSOR,
581};
582
583
584/**
585 * struct drm_plane - central DRM plane control structure
586 *
587 * Planes represent the scanout hardware of a display block. They receive their
588 * input data from a &drm_framebuffer and feed it to a &drm_crtc. Planes control
589 * the color conversion, see `Plane Composition Properties`_ for more details,
590 * and are also involved in the color conversion of input pixels, see `Color
591 * Management Properties`_ for details on that.
592 */
593struct drm_plane {
594 /** @dev: DRM device this plane belongs to */
595 struct drm_device *dev;
596
597 /**
598 * @head:
599 *
600 * List of all planes on @dev, linked from &drm_mode_config.plane_list.
601 * Invariant over the lifetime of @dev and therefore does not need
602 * locking.
603 */
604 struct list_head head;
605
606 /** @name: human readable name, can be overwritten by the driver */
607 char *name;
608
609 /**
610 * @mutex:
611 *
612 * Protects modeset plane state, together with the &drm_crtc.mutex of
613 * CRTC this plane is linked to (when active, getting activated or
614 * getting disabled).
615 *
616 * For atomic drivers specifically this protects @state.
617 */
618 struct drm_modeset_lock mutex;
619
620 /** @base: base mode object */
621 struct drm_mode_object base;
622
623 /**
624 * @possible_crtcs: pipes this plane can be bound to constructed from
625 * drm_crtc_mask()
626 */
627 uint32_t possible_crtcs;
628 /** @format_types: array of formats supported by this plane */
629 uint32_t *format_types;
630 /** @format_count: Size of the array pointed at by @format_types. */
631 unsigned int format_count;
632 /**
633 * @format_default: driver hasn't supplied supported formats for the
634 * plane. Used by the non-atomic driver compatibility wrapper only.
635 */
636 bool format_default;
637
638 /** @modifiers: array of modifiers supported by this plane */
639 uint64_t *modifiers;
640 /** @modifier_count: Size of the array pointed at by @modifier_count. */
641 unsigned int modifier_count;
642
643 /**
644 * @crtc:
645 *
646 * Currently bound CRTC, only meaningful for non-atomic drivers. For
647 * atomic drivers this is forced to be NULL, atomic drivers should
648 * instead check &drm_plane_state.crtc.
649 */
650 struct drm_crtc *crtc;
651
652 /**
653 * @fb:
654 *
655 * Currently bound framebuffer, only meaningful for non-atomic drivers.
656 * For atomic drivers this is forced to be NULL, atomic drivers should
657 * instead check &drm_plane_state.fb.
658 */
659 struct drm_framebuffer *fb;
660
661 /**
662 * @old_fb:
663 *
664 * Temporary tracking of the old fb while a modeset is ongoing. Only
665 * used by non-atomic drivers, forced to be NULL for atomic drivers.
666 */
667 struct drm_framebuffer *old_fb;
668
669 /** @funcs: plane control functions */
670 const struct drm_plane_funcs *funcs;
671
672 /** @properties: property tracking for this plane */
673 struct drm_object_properties properties;
674
675 /** @type: Type of plane, see &enum drm_plane_type for details. */
676 enum drm_plane_type type;
677
678 /**
679 * @index: Position inside the mode_config.list, can be used as an array
680 * index. It is invariant over the lifetime of the plane.
681 */
682 unsigned index;
683
684 /** @helper_private: mid-layer private data */
685 const struct drm_plane_helper_funcs *helper_private;
686
687 /**
688 * @state:
689 *
690 * Current atomic state for this plane.
691 *
692 * This is protected by @mutex. Note that nonblocking atomic commits
693 * access the current plane state without taking locks. Either by going
694 * through the &struct drm_atomic_state pointers, see
695 * for_each_oldnew_plane_in_state(), for_each_old_plane_in_state() and
696 * for_each_new_plane_in_state(). Or through careful ordering of atomic
697 * commit operations as implemented in the atomic helpers, see
698 * &struct drm_crtc_commit.
699 */
700 struct drm_plane_state *state;
701
702 /**
703 * @alpha_property:
704 * Optional alpha property for this plane. See
705 * drm_plane_create_alpha_property().
706 */
707 struct drm_property *alpha_property;
708 /**
709 * @zpos_property:
710 * Optional zpos property for this plane. See
711 * drm_plane_create_zpos_property().
712 */
713 struct drm_property *zpos_property;
714 /**
715 * @rotation_property:
716 * Optional rotation property for this plane. See
717 * drm_plane_create_rotation_property().
718 */
719 struct drm_property *rotation_property;
720 /**
721 * @blend_mode_property:
722 * Optional "pixel blend mode" enum property for this plane.
723 * Blend mode property represents the alpha blending equation selection,
724 * describing how the pixels from the current plane are composited with
725 * the background.
726 */
727 struct drm_property *blend_mode_property;
728
729 /**
730 * @color_encoding_property:
731 *
732 * Optional "COLOR_ENCODING" enum property for specifying
733 * color encoding for non RGB formats.
734 * See drm_plane_create_color_properties().
735 */
736 struct drm_property *color_encoding_property;
737 /**
738 * @color_range_property:
739 *
740 * Optional "COLOR_RANGE" enum property for specifying
741 * color range for non RGB formats.
742 * See drm_plane_create_color_properties().
743 */
744 struct drm_property *color_range_property;
745
746 /**
747 * @scaling_filter_property: property to apply a particular filter while
748 * scaling.
749 */
750 struct drm_property *scaling_filter_property;
751};
752
753#define obj_to_plane(x) container_of(x, struct drm_plane, base)
754
755__printf(9, 10)
756int drm_universal_plane_init(struct drm_device *dev,
757 struct drm_plane *plane,
758 uint32_t possible_crtcs,
759 const struct drm_plane_funcs *funcs,
760 const uint32_t *formats,
761 unsigned int format_count,
762 const uint64_t *format_modifiers,
763 enum drm_plane_type type,
764 const char *name, ...);
765void drm_plane_cleanup(struct drm_plane *plane);
766
767__printf(10, 11)
768void *__drmm_universal_plane_alloc(struct drm_device *dev,
769 size_t size, size_t offset,
770 uint32_t possible_crtcs,
771 const struct drm_plane_funcs *funcs,
772 const uint32_t *formats,
773 unsigned int format_count,
774 const uint64_t *format_modifiers,
775 enum drm_plane_type plane_type,
776 const char *name, ...);
777
778/**
779 * drmm_universal_plane_alloc - Allocate and initialize an universal plane object
780 * @dev: DRM device
781 * @type: the type of the struct which contains struct &drm_plane
782 * @member: the name of the &drm_plane within @type
783 * @possible_crtcs: bitmask of possible CRTCs
784 * @funcs: callbacks for the new plane
785 * @formats: array of supported formats (DRM_FORMAT\_\*)
786 * @format_count: number of elements in @formats
787 * @format_modifiers: array of struct drm_format modifiers terminated by
788 * DRM_FORMAT_MOD_INVALID
789 * @plane_type: type of plane (overlay, primary, cursor)
790 * @name: printf style format string for the plane name, or NULL for default name
791 *
792 * Allocates and initializes a plane object of type @type. Cleanup is
793 * automatically handled through registering drm_plane_cleanup() with
794 * drmm_add_action().
795 *
796 * The @drm_plane_funcs.destroy hook must be NULL.
797 *
798 * Drivers that only support the DRM_FORMAT_MOD_LINEAR modifier support may set
799 * @format_modifiers to NULL. The plane will advertise the linear modifier.
800 *
801 * Returns:
802 * Pointer to new plane, or ERR_PTR on failure.
803 */
804#define drmm_universal_plane_alloc(dev, type, member, possible_crtcs, funcs, formats, \
805 format_count, format_modifiers, plane_type, name, ...) \
806 ((type *)__drmm_universal_plane_alloc(dev, sizeof(type), \
807 offsetof(type, member), \
808 possible_crtcs, funcs, formats, \
809 format_count, format_modifiers, \
810 plane_type, name, ##__VA_ARGS__))
811
812__printf(10, 11)
813void *__drm_universal_plane_alloc(struct drm_device *dev,
814 size_t size, size_t offset,
815 uint32_t possible_crtcs,
816 const struct drm_plane_funcs *funcs,
817 const uint32_t *formats,
818 unsigned int format_count,
819 const uint64_t *format_modifiers,
820 enum drm_plane_type plane_type,
821 const char *name, ...);
822
823/**
824 * drm_universal_plane_alloc() - Allocate and initialize an universal plane object
825 * @dev: DRM device
826 * @type: the type of the struct which contains struct &drm_plane
827 * @member: the name of the &drm_plane within @type
828 * @possible_crtcs: bitmask of possible CRTCs
829 * @funcs: callbacks for the new plane
830 * @formats: array of supported formats (DRM_FORMAT\_\*)
831 * @format_count: number of elements in @formats
832 * @format_modifiers: array of struct drm_format modifiers terminated by
833 * DRM_FORMAT_MOD_INVALID
834 * @plane_type: type of plane (overlay, primary, cursor)
835 * @name: printf style format string for the plane name, or NULL for default name
836 *
837 * Allocates and initializes a plane object of type @type. The caller
838 * is responsible for releasing the allocated memory with kfree().
839 *
840 * Drivers are encouraged to use drmm_universal_plane_alloc() instead.
841 *
842 * Drivers that only support the DRM_FORMAT_MOD_LINEAR modifier support may set
843 * @format_modifiers to NULL. The plane will advertise the linear modifier.
844 *
845 * Returns:
846 * Pointer to new plane, or ERR_PTR on failure.
847 */
848#define drm_universal_plane_alloc(dev, type, member, possible_crtcs, funcs, formats, \
849 format_count, format_modifiers, plane_type, name, ...) \
850 ((type *)__drm_universal_plane_alloc(dev, sizeof(type), \
851 offsetof(type, member), \
852 possible_crtcs, funcs, formats, \
853 format_count, format_modifiers, \
854 plane_type, name, ##__VA_ARGS__))
855
856/**
857 * drm_plane_index - find the index of a registered plane
858 * @plane: plane to find index for
859 *
860 * Given a registered plane, return the index of that plane within a DRM
861 * device's list of planes.
862 */
863static inline unsigned int drm_plane_index(const struct drm_plane *plane)
864{
865 return plane->index;
866}
867
868/**
869 * drm_plane_mask - find the mask of a registered plane
870 * @plane: plane to find mask for
871 */
872static inline u32 drm_plane_mask(const struct drm_plane *plane)
873{
874 return 1 << drm_plane_index(plane);
875}
876
877struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx);
878void drm_plane_force_disable(struct drm_plane *plane);
879
880int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
881 struct drm_property *property,
882 uint64_t value);
883
884/**
885 * drm_plane_find - find a &drm_plane
886 * @dev: DRM device
887 * @file_priv: drm file to check for lease against.
888 * @id: plane id
889 *
890 * Returns the plane with @id, NULL if it doesn't exist. Simple wrapper around
891 * drm_mode_object_find().
892 */
893static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
894 struct drm_file *file_priv,
895 uint32_t id)
896{
897 struct drm_mode_object *mo;
898 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_PLANE);
899 return mo ? obj_to_plane(mo) : NULL;
900}
901
902/**
903 * drm_for_each_plane_mask - iterate over planes specified by bitmask
904 * @plane: the loop cursor
905 * @dev: the DRM device
906 * @plane_mask: bitmask of plane indices
907 *
908 * Iterate over all planes specified by bitmask.
909 */
910#define drm_for_each_plane_mask(plane, dev, plane_mask) \
911 list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
912 for_each_if ((plane_mask) & drm_plane_mask(plane))
913
914/**
915 * drm_for_each_legacy_plane - iterate over all planes for legacy userspace
916 * @plane: the loop cursor
917 * @dev: the DRM device
918 *
919 * Iterate over all legacy planes of @dev, excluding primary and cursor planes.
920 * This is useful for implementing userspace apis when userspace is not
921 * universal plane aware. See also &enum drm_plane_type.
922 */
923#define drm_for_each_legacy_plane(plane, dev) \
924 list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
925 for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
926
927/**
928 * drm_for_each_plane - iterate over all planes
929 * @plane: the loop cursor
930 * @dev: the DRM device
931 *
932 * Iterate over all planes of @dev, include primary and cursor planes.
933 */
934#define drm_for_each_plane(plane, dev) \
935 list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
936
937bool drm_any_plane_has_format(struct drm_device *dev,
938 u32 format, u64 modifier);
939
940void drm_plane_enable_fb_damage_clips(struct drm_plane *plane);
941unsigned int
942drm_plane_get_damage_clips_count(const struct drm_plane_state *state);
943struct drm_mode_rect *
944drm_plane_get_damage_clips(const struct drm_plane_state *state);
945
946int drm_plane_create_scaling_filter_property(struct drm_plane *plane,
947 unsigned int supported_filters);
948
949#endif
1/*
2 * Copyright (c) 2016 Intel Corporation
3 *
4 * Permission to use, copy, modify, distribute, and sell this software and its
5 * documentation for any purpose is hereby granted without fee, provided that
6 * the above copyright notice appear in all copies and that both that copyright
7 * notice and this permission notice appear in supporting documentation, and
8 * that the name of the copyright holders not be used in advertising or
9 * publicity pertaining to distribution of the software without specific,
10 * written prior permission. The copyright holders make no representations
11 * about the suitability of this software for any purpose. It is provided "as
12 * is" without express or implied warranty.
13 *
14 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
20 * OF THIS SOFTWARE.
21 */
22
23#ifndef __DRM_PLANE_H__
24#define __DRM_PLANE_H__
25
26#include <linux/list.h>
27#include <linux/ctype.h>
28#include <drm/drm_mode_object.h>
29#include <drm/drm_color_mgmt.h>
30#include <drm/drm_rect.h>
31#include <drm/drm_modeset_lock.h>
32#include <drm/drm_util.h>
33
34struct drm_crtc;
35struct drm_printer;
36struct drm_modeset_acquire_ctx;
37
38/**
39 * struct drm_plane_state - mutable plane state
40 *
41 * Please not that the destination coordinates @crtc_x, @crtc_y, @crtc_h and
42 * @crtc_w and the source coordinates @src_x, @src_y, @src_h and @src_w are the
43 * raw coordinates provided by userspace. Drivers should use
44 * drm_atomic_helper_check_plane_state() and only use the derived rectangles in
45 * @src and @dst to program the hardware.
46 */
47struct drm_plane_state {
48 /** @plane: backpointer to the plane */
49 struct drm_plane *plane;
50
51 /**
52 * @crtc:
53 *
54 * Currently bound CRTC, NULL if disabled. Do not this write directly,
55 * use drm_atomic_set_crtc_for_plane()
56 */
57 struct drm_crtc *crtc;
58
59 /**
60 * @fb:
61 *
62 * Currently bound framebuffer. Do not write this directly, use
63 * drm_atomic_set_fb_for_plane()
64 */
65 struct drm_framebuffer *fb;
66
67 /**
68 * @fence:
69 *
70 * Optional fence to wait for before scanning out @fb. The core atomic
71 * code will set this when userspace is using explicit fencing. Do not
72 * write this field directly for a driver's implicit fence, use
73 * drm_atomic_set_fence_for_plane() to ensure that an explicit fence is
74 * preserved.
75 *
76 * Drivers should store any implicit fence in this from their
77 * &drm_plane_helper_funcs.prepare_fb callback. See drm_gem_fb_prepare_fb()
78 * and drm_gem_fb_simple_display_pipe_prepare_fb() for suitable helpers.
79 */
80 struct dma_fence *fence;
81
82 /**
83 * @crtc_x:
84 *
85 * Left position of visible portion of plane on crtc, signed dest
86 * location allows it to be partially off screen.
87 */
88
89 int32_t crtc_x;
90 /**
91 * @crtc_y:
92 *
93 * Upper position of visible portion of plane on crtc, signed dest
94 * location allows it to be partially off screen.
95 */
96 int32_t crtc_y;
97
98 /** @crtc_w: width of visible portion of plane on crtc */
99 /** @crtc_h: height of visible portion of plane on crtc */
100 uint32_t crtc_w, crtc_h;
101
102 /**
103 * @src_x: left position of visible portion of plane within plane (in
104 * 16.16 fixed point).
105 */
106 uint32_t src_x;
107 /**
108 * @src_y: upper position of visible portion of plane within plane (in
109 * 16.16 fixed point).
110 */
111 uint32_t src_y;
112 /** @src_w: width of visible portion of plane (in 16.16) */
113 /** @src_h: height of visible portion of plane (in 16.16) */
114 uint32_t src_h, src_w;
115
116 /**
117 * @alpha:
118 * Opacity of the plane with 0 as completely transparent and 0xffff as
119 * completely opaque. See drm_plane_create_alpha_property() for more
120 * details.
121 */
122 u16 alpha;
123
124 /**
125 * @pixel_blend_mode:
126 * The alpha blending equation selection, describing how the pixels from
127 * the current plane are composited with the background. Value can be
128 * one of DRM_MODE_BLEND_*
129 */
130 uint16_t pixel_blend_mode;
131
132 /**
133 * @rotation:
134 * Rotation of the plane. See drm_plane_create_rotation_property() for
135 * more details.
136 */
137 unsigned int rotation;
138
139 /**
140 * @zpos:
141 * Priority of the given plane on crtc (optional).
142 *
143 * Note that multiple active planes on the same crtc can have an
144 * identical zpos value. The rule to solving the conflict is to compare
145 * the plane object IDs; the plane with a higher ID must be stacked on
146 * top of a plane with a lower ID.
147 *
148 * See drm_plane_create_zpos_property() and
149 * drm_plane_create_zpos_immutable_property() for more details.
150 */
151 unsigned int zpos;
152
153 /**
154 * @normalized_zpos:
155 * Normalized value of zpos: unique, range from 0 to N-1 where N is the
156 * number of active planes for given crtc. Note that the driver must set
157 * &drm_mode_config.normalize_zpos or call drm_atomic_normalize_zpos() to
158 * update this before it can be trusted.
159 */
160 unsigned int normalized_zpos;
161
162 /**
163 * @color_encoding:
164 *
165 * Color encoding for non RGB formats
166 */
167 enum drm_color_encoding color_encoding;
168
169 /**
170 * @color_range:
171 *
172 * Color range for non RGB formats
173 */
174 enum drm_color_range color_range;
175
176 /**
177 * @fb_damage_clips:
178 *
179 * Blob representing damage (area in plane framebuffer that changed
180 * since last plane update) as an array of &drm_mode_rect in framebuffer
181 * coodinates of the attached framebuffer. Note that unlike plane src,
182 * damage clips are not in 16.16 fixed point.
183 */
184 struct drm_property_blob *fb_damage_clips;
185
186 /** @src: clipped source coordinates of the plane (in 16.16) */
187 /** @dst: clipped destination coordinates of the plane */
188 struct drm_rect src, dst;
189
190 /**
191 * @visible:
192 *
193 * Visibility of the plane. This can be false even if fb!=NULL and
194 * crtc!=NULL, due to clipping.
195 */
196 bool visible;
197
198 /**
199 * @commit: Tracks the pending commit to prevent use-after-free conditions,
200 * and for async plane updates.
201 *
202 * May be NULL.
203 */
204 struct drm_crtc_commit *commit;
205
206 /** @state: backpointer to global drm_atomic_state */
207 struct drm_atomic_state *state;
208};
209
210static inline struct drm_rect
211drm_plane_state_src(const struct drm_plane_state *state)
212{
213 struct drm_rect src = {
214 .x1 = state->src_x,
215 .y1 = state->src_y,
216 .x2 = state->src_x + state->src_w,
217 .y2 = state->src_y + state->src_h,
218 };
219 return src;
220}
221
222static inline struct drm_rect
223drm_plane_state_dest(const struct drm_plane_state *state)
224{
225 struct drm_rect dest = {
226 .x1 = state->crtc_x,
227 .y1 = state->crtc_y,
228 .x2 = state->crtc_x + state->crtc_w,
229 .y2 = state->crtc_y + state->crtc_h,
230 };
231 return dest;
232}
233
234/**
235 * struct drm_plane_funcs - driver plane control functions
236 */
237struct drm_plane_funcs {
238 /**
239 * @update_plane:
240 *
241 * This is the legacy entry point to enable and configure the plane for
242 * the given CRTC and framebuffer. It is never called to disable the
243 * plane, i.e. the passed-in crtc and fb paramters are never NULL.
244 *
245 * The source rectangle in frame buffer memory coordinates is given by
246 * the src_x, src_y, src_w and src_h parameters (as 16.16 fixed point
247 * values). Devices that don't support subpixel plane coordinates can
248 * ignore the fractional part.
249 *
250 * The destination rectangle in CRTC coordinates is given by the
251 * crtc_x, crtc_y, crtc_w and crtc_h parameters (as integer values).
252 * Devices scale the source rectangle to the destination rectangle. If
253 * scaling is not supported, and the source rectangle size doesn't match
254 * the destination rectangle size, the driver must return a
255 * -<errorname>EINVAL</errorname> error.
256 *
257 * Drivers implementing atomic modeset should use
258 * drm_atomic_helper_update_plane() to implement this hook.
259 *
260 * RETURNS:
261 *
262 * 0 on success or a negative error code on failure.
263 */
264 int (*update_plane)(struct drm_plane *plane,
265 struct drm_crtc *crtc, struct drm_framebuffer *fb,
266 int crtc_x, int crtc_y,
267 unsigned int crtc_w, unsigned int crtc_h,
268 uint32_t src_x, uint32_t src_y,
269 uint32_t src_w, uint32_t src_h,
270 struct drm_modeset_acquire_ctx *ctx);
271
272 /**
273 * @disable_plane:
274 *
275 * This is the legacy entry point to disable the plane. The DRM core
276 * calls this method in response to a DRM_IOCTL_MODE_SETPLANE IOCTL call
277 * with the frame buffer ID set to 0. Disabled planes must not be
278 * processed by the CRTC.
279 *
280 * Drivers implementing atomic modeset should use
281 * drm_atomic_helper_disable_plane() to implement this hook.
282 *
283 * RETURNS:
284 *
285 * 0 on success or a negative error code on failure.
286 */
287 int (*disable_plane)(struct drm_plane *plane,
288 struct drm_modeset_acquire_ctx *ctx);
289
290 /**
291 * @destroy:
292 *
293 * Clean up plane resources. This is only called at driver unload time
294 * through drm_mode_config_cleanup() since a plane cannot be hotplugged
295 * in DRM.
296 */
297 void (*destroy)(struct drm_plane *plane);
298
299 /**
300 * @reset:
301 *
302 * Reset plane hardware and software state to off. This function isn't
303 * called by the core directly, only through drm_mode_config_reset().
304 * It's not a helper hook only for historical reasons.
305 *
306 * Atomic drivers can use drm_atomic_helper_plane_reset() to reset
307 * atomic state using this hook.
308 */
309 void (*reset)(struct drm_plane *plane);
310
311 /**
312 * @set_property:
313 *
314 * This is the legacy entry point to update a property attached to the
315 * plane.
316 *
317 * This callback is optional if the driver does not support any legacy
318 * driver-private properties. For atomic drivers it is not used because
319 * property handling is done entirely in the DRM core.
320 *
321 * RETURNS:
322 *
323 * 0 on success or a negative error code on failure.
324 */
325 int (*set_property)(struct drm_plane *plane,
326 struct drm_property *property, uint64_t val);
327
328 /**
329 * @atomic_duplicate_state:
330 *
331 * Duplicate the current atomic state for this plane and return it.
332 * The core and helpers guarantee that any atomic state duplicated with
333 * this hook and still owned by the caller (i.e. not transferred to the
334 * driver by calling &drm_mode_config_funcs.atomic_commit) will be
335 * cleaned up by calling the @atomic_destroy_state hook in this
336 * structure.
337 *
338 * This callback is mandatory for atomic drivers.
339 *
340 * Atomic drivers which don't subclass &struct drm_plane_state should use
341 * drm_atomic_helper_plane_duplicate_state(). Drivers that subclass the
342 * state structure to extend it with driver-private state should use
343 * __drm_atomic_helper_plane_duplicate_state() to make sure shared state is
344 * duplicated in a consistent fashion across drivers.
345 *
346 * It is an error to call this hook before &drm_plane.state has been
347 * initialized correctly.
348 *
349 * NOTE:
350 *
351 * If the duplicate state references refcounted resources this hook must
352 * acquire a reference for each of them. The driver must release these
353 * references again in @atomic_destroy_state.
354 *
355 * RETURNS:
356 *
357 * Duplicated atomic state or NULL when the allocation failed.
358 */
359 struct drm_plane_state *(*atomic_duplicate_state)(struct drm_plane *plane);
360
361 /**
362 * @atomic_destroy_state:
363 *
364 * Destroy a state duplicated with @atomic_duplicate_state and release
365 * or unreference all resources it references
366 *
367 * This callback is mandatory for atomic drivers.
368 */
369 void (*atomic_destroy_state)(struct drm_plane *plane,
370 struct drm_plane_state *state);
371
372 /**
373 * @atomic_set_property:
374 *
375 * Decode a driver-private property value and store the decoded value
376 * into the passed-in state structure. Since the atomic core decodes all
377 * standardized properties (even for extensions beyond the core set of
378 * properties which might not be implemented by all drivers) this
379 * requires drivers to subclass the state structure.
380 *
381 * Such driver-private properties should really only be implemented for
382 * truly hardware/vendor specific state. Instead it is preferred to
383 * standardize atomic extension and decode the properties used to expose
384 * such an extension in the core.
385 *
386 * Do not call this function directly, use
387 * drm_atomic_plane_set_property() instead.
388 *
389 * This callback is optional if the driver does not support any
390 * driver-private atomic properties.
391 *
392 * NOTE:
393 *
394 * This function is called in the state assembly phase of atomic
395 * modesets, which can be aborted for any reason (including on
396 * userspace's request to just check whether a configuration would be
397 * possible). Drivers MUST NOT touch any persistent state (hardware or
398 * software) or data structures except the passed in @state parameter.
399 *
400 * Also since userspace controls in which order properties are set this
401 * function must not do any input validation (since the state update is
402 * incomplete and hence likely inconsistent). Instead any such input
403 * validation must be done in the various atomic_check callbacks.
404 *
405 * RETURNS:
406 *
407 * 0 if the property has been found, -EINVAL if the property isn't
408 * implemented by the driver (which shouldn't ever happen, the core only
409 * asks for properties attached to this plane). No other validation is
410 * allowed by the driver. The core already checks that the property
411 * value is within the range (integer, valid enum value, ...) the driver
412 * set when registering the property.
413 */
414 int (*atomic_set_property)(struct drm_plane *plane,
415 struct drm_plane_state *state,
416 struct drm_property *property,
417 uint64_t val);
418
419 /**
420 * @atomic_get_property:
421 *
422 * Reads out the decoded driver-private property. This is used to
423 * implement the GETPLANE IOCTL.
424 *
425 * Do not call this function directly, use
426 * drm_atomic_plane_get_property() instead.
427 *
428 * This callback is optional if the driver does not support any
429 * driver-private atomic properties.
430 *
431 * RETURNS:
432 *
433 * 0 on success, -EINVAL if the property isn't implemented by the
434 * driver (which should never happen, the core only asks for
435 * properties attached to this plane).
436 */
437 int (*atomic_get_property)(struct drm_plane *plane,
438 const struct drm_plane_state *state,
439 struct drm_property *property,
440 uint64_t *val);
441 /**
442 * @late_register:
443 *
444 * This optional hook can be used to register additional userspace
445 * interfaces attached to the plane like debugfs interfaces.
446 * It is called late in the driver load sequence from drm_dev_register().
447 * Everything added from this callback should be unregistered in
448 * the early_unregister callback.
449 *
450 * Returns:
451 *
452 * 0 on success, or a negative error code on failure.
453 */
454 int (*late_register)(struct drm_plane *plane);
455
456 /**
457 * @early_unregister:
458 *
459 * This optional hook should be used to unregister the additional
460 * userspace interfaces attached to the plane from
461 * @late_register. It is called from drm_dev_unregister(),
462 * early in the driver unload sequence to disable userspace access
463 * before data structures are torndown.
464 */
465 void (*early_unregister)(struct drm_plane *plane);
466
467 /**
468 * @atomic_print_state:
469 *
470 * If driver subclasses &struct drm_plane_state, it should implement
471 * this optional hook for printing additional driver specific state.
472 *
473 * Do not call this directly, use drm_atomic_plane_print_state()
474 * instead.
475 */
476 void (*atomic_print_state)(struct drm_printer *p,
477 const struct drm_plane_state *state);
478
479 /**
480 * @format_mod_supported:
481 *
482 * This optional hook is used for the DRM to determine if the given
483 * format/modifier combination is valid for the plane. This allows the
484 * DRM to generate the correct format bitmask (which formats apply to
485 * which modifier), and to valdiate modifiers at atomic_check time.
486 *
487 * If not present, then any modifier in the plane's modifier
488 * list is allowed with any of the plane's formats.
489 *
490 * Returns:
491 *
492 * True if the given modifier is valid for that format on the plane.
493 * False otherwise.
494 */
495 bool (*format_mod_supported)(struct drm_plane *plane, uint32_t format,
496 uint64_t modifier);
497};
498
499/**
500 * enum drm_plane_type - uapi plane type enumeration
501 *
502 * For historical reasons not all planes are made the same. This enumeration is
503 * used to tell the different types of planes apart to implement the different
504 * uapi semantics for them. For userspace which is universal plane aware and
505 * which is using that atomic IOCTL there's no difference between these planes
506 * (beyong what the driver and hardware can support of course).
507 *
508 * For compatibility with legacy userspace, only overlay planes are made
509 * available to userspace by default. Userspace clients may set the
510 * DRM_CLIENT_CAP_UNIVERSAL_PLANES client capability bit to indicate that they
511 * wish to receive a universal plane list containing all plane types. See also
512 * drm_for_each_legacy_plane().
513 *
514 * WARNING: The values of this enum is UABI since they're exposed in the "type"
515 * property.
516 */
517enum drm_plane_type {
518 /**
519 * @DRM_PLANE_TYPE_OVERLAY:
520 *
521 * Overlay planes represent all non-primary, non-cursor planes. Some
522 * drivers refer to these types of planes as "sprites" internally.
523 */
524 DRM_PLANE_TYPE_OVERLAY,
525
526 /**
527 * @DRM_PLANE_TYPE_PRIMARY:
528 *
529 * Primary planes represent a "main" plane for a CRTC. Primary planes
530 * are the planes operated upon by CRTC modesetting and flipping
531 * operations described in the &drm_crtc_funcs.page_flip and
532 * &drm_crtc_funcs.set_config hooks.
533 */
534 DRM_PLANE_TYPE_PRIMARY,
535
536 /**
537 * @DRM_PLANE_TYPE_CURSOR:
538 *
539 * Cursor planes represent a "cursor" plane for a CRTC. Cursor planes
540 * are the planes operated upon by the DRM_IOCTL_MODE_CURSOR and
541 * DRM_IOCTL_MODE_CURSOR2 IOCTLs.
542 */
543 DRM_PLANE_TYPE_CURSOR,
544};
545
546
547/**
548 * struct drm_plane - central DRM plane control structure
549 *
550 * Planes represent the scanout hardware of a display block. They receive their
551 * input data from a &drm_framebuffer and feed it to a &drm_crtc. Planes control
552 * the color conversion, see `Plane Composition Properties`_ for more details,
553 * and are also involved in the color conversion of input pixels, see `Color
554 * Management Properties`_ for details on that.
555 */
556struct drm_plane {
557 /** @dev: DRM device this plane belongs to */
558 struct drm_device *dev;
559
560 /**
561 * @head:
562 *
563 * List of all planes on @dev, linked from &drm_mode_config.plane_list.
564 * Invariant over the lifetime of @dev and therefore does not need
565 * locking.
566 */
567 struct list_head head;
568
569 /** @name: human readable name, can be overwritten by the driver */
570 char *name;
571
572 /**
573 * @mutex:
574 *
575 * Protects modeset plane state, together with the &drm_crtc.mutex of
576 * CRTC this plane is linked to (when active, getting activated or
577 * getting disabled).
578 *
579 * For atomic drivers specifically this protects @state.
580 */
581 struct drm_modeset_lock mutex;
582
583 /** @base: base mode object */
584 struct drm_mode_object base;
585
586 /**
587 * @possible_crtcs: pipes this plane can be bound to constructed from
588 * drm_crtc_mask()
589 */
590 uint32_t possible_crtcs;
591 /** @format_types: array of formats supported by this plane */
592 uint32_t *format_types;
593 /** @format_count: Size of the array pointed at by @format_types. */
594 unsigned int format_count;
595 /**
596 * @format_default: driver hasn't supplied supported formats for the
597 * plane. Used by the drm_plane_init compatibility wrapper only.
598 */
599 bool format_default;
600
601 /** @modifiers: array of modifiers supported by this plane */
602 uint64_t *modifiers;
603 /** @modifier_count: Size of the array pointed at by @modifier_count. */
604 unsigned int modifier_count;
605
606 /**
607 * @crtc:
608 *
609 * Currently bound CRTC, only meaningful for non-atomic drivers. For
610 * atomic drivers this is forced to be NULL, atomic drivers should
611 * instead check &drm_plane_state.crtc.
612 */
613 struct drm_crtc *crtc;
614
615 /**
616 * @fb:
617 *
618 * Currently bound framebuffer, only meaningful for non-atomic drivers.
619 * For atomic drivers this is forced to be NULL, atomic drivers should
620 * instead check &drm_plane_state.fb.
621 */
622 struct drm_framebuffer *fb;
623
624 /**
625 * @old_fb:
626 *
627 * Temporary tracking of the old fb while a modeset is ongoing. Only
628 * used by non-atomic drivers, forced to be NULL for atomic drivers.
629 */
630 struct drm_framebuffer *old_fb;
631
632 /** @funcs: plane control functions */
633 const struct drm_plane_funcs *funcs;
634
635 /** @properties: property tracking for this plane */
636 struct drm_object_properties properties;
637
638 /** @type: Type of plane, see &enum drm_plane_type for details. */
639 enum drm_plane_type type;
640
641 /**
642 * @index: Position inside the mode_config.list, can be used as an array
643 * index. It is invariant over the lifetime of the plane.
644 */
645 unsigned index;
646
647 /** @helper_private: mid-layer private data */
648 const struct drm_plane_helper_funcs *helper_private;
649
650 /**
651 * @state:
652 *
653 * Current atomic state for this plane.
654 *
655 * This is protected by @mutex. Note that nonblocking atomic commits
656 * access the current plane state without taking locks. Either by going
657 * through the &struct drm_atomic_state pointers, see
658 * for_each_oldnew_plane_in_state(), for_each_old_plane_in_state() and
659 * for_each_new_plane_in_state(). Or through careful ordering of atomic
660 * commit operations as implemented in the atomic helpers, see
661 * &struct drm_crtc_commit.
662 */
663 struct drm_plane_state *state;
664
665 /**
666 * @alpha_property:
667 * Optional alpha property for this plane. See
668 * drm_plane_create_alpha_property().
669 */
670 struct drm_property *alpha_property;
671 /**
672 * @zpos_property:
673 * Optional zpos property for this plane. See
674 * drm_plane_create_zpos_property().
675 */
676 struct drm_property *zpos_property;
677 /**
678 * @rotation_property:
679 * Optional rotation property for this plane. See
680 * drm_plane_create_rotation_property().
681 */
682 struct drm_property *rotation_property;
683 /**
684 * @blend_mode_property:
685 * Optional "pixel blend mode" enum property for this plane.
686 * Blend mode property represents the alpha blending equation selection,
687 * describing how the pixels from the current plane are composited with
688 * the background.
689 */
690 struct drm_property *blend_mode_property;
691
692 /**
693 * @color_encoding_property:
694 *
695 * Optional "COLOR_ENCODING" enum property for specifying
696 * color encoding for non RGB formats.
697 * See drm_plane_create_color_properties().
698 */
699 struct drm_property *color_encoding_property;
700 /**
701 * @color_range_property:
702 *
703 * Optional "COLOR_RANGE" enum property for specifying
704 * color range for non RGB formats.
705 * See drm_plane_create_color_properties().
706 */
707 struct drm_property *color_range_property;
708};
709
710#define obj_to_plane(x) container_of(x, struct drm_plane, base)
711
712__printf(9, 10)
713int drm_universal_plane_init(struct drm_device *dev,
714 struct drm_plane *plane,
715 uint32_t possible_crtcs,
716 const struct drm_plane_funcs *funcs,
717 const uint32_t *formats,
718 unsigned int format_count,
719 const uint64_t *format_modifiers,
720 enum drm_plane_type type,
721 const char *name, ...);
722int drm_plane_init(struct drm_device *dev,
723 struct drm_plane *plane,
724 uint32_t possible_crtcs,
725 const struct drm_plane_funcs *funcs,
726 const uint32_t *formats, unsigned int format_count,
727 bool is_primary);
728void drm_plane_cleanup(struct drm_plane *plane);
729
730/**
731 * drm_plane_index - find the index of a registered plane
732 * @plane: plane to find index for
733 *
734 * Given a registered plane, return the index of that plane within a DRM
735 * device's list of planes.
736 */
737static inline unsigned int drm_plane_index(const struct drm_plane *plane)
738{
739 return plane->index;
740}
741
742/**
743 * drm_plane_mask - find the mask of a registered plane
744 * @plane: plane to find mask for
745 */
746static inline u32 drm_plane_mask(const struct drm_plane *plane)
747{
748 return 1 << drm_plane_index(plane);
749}
750
751struct drm_plane * drm_plane_from_index(struct drm_device *dev, int idx);
752void drm_plane_force_disable(struct drm_plane *plane);
753
754int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
755 struct drm_property *property,
756 uint64_t value);
757
758/**
759 * drm_plane_find - find a &drm_plane
760 * @dev: DRM device
761 * @file_priv: drm file to check for lease against.
762 * @id: plane id
763 *
764 * Returns the plane with @id, NULL if it doesn't exist. Simple wrapper around
765 * drm_mode_object_find().
766 */
767static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
768 struct drm_file *file_priv,
769 uint32_t id)
770{
771 struct drm_mode_object *mo;
772 mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_PLANE);
773 return mo ? obj_to_plane(mo) : NULL;
774}
775
776/**
777 * drm_for_each_plane_mask - iterate over planes specified by bitmask
778 * @plane: the loop cursor
779 * @dev: the DRM device
780 * @plane_mask: bitmask of plane indices
781 *
782 * Iterate over all planes specified by bitmask.
783 */
784#define drm_for_each_plane_mask(plane, dev, plane_mask) \
785 list_for_each_entry((plane), &(dev)->mode_config.plane_list, head) \
786 for_each_if ((plane_mask) & drm_plane_mask(plane))
787
788/**
789 * drm_for_each_legacy_plane - iterate over all planes for legacy userspace
790 * @plane: the loop cursor
791 * @dev: the DRM device
792 *
793 * Iterate over all legacy planes of @dev, excluding primary and cursor planes.
794 * This is useful for implementing userspace apis when userspace is not
795 * universal plane aware. See also &enum drm_plane_type.
796 */
797#define drm_for_each_legacy_plane(plane, dev) \
798 list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
799 for_each_if (plane->type == DRM_PLANE_TYPE_OVERLAY)
800
801/**
802 * drm_for_each_plane - iterate over all planes
803 * @plane: the loop cursor
804 * @dev: the DRM device
805 *
806 * Iterate over all planes of @dev, include primary and cursor planes.
807 */
808#define drm_for_each_plane(plane, dev) \
809 list_for_each_entry(plane, &(dev)->mode_config.plane_list, head)
810
811bool drm_any_plane_has_format(struct drm_device *dev,
812 u32 format, u64 modifier);
813/**
814 * drm_plane_get_damage_clips_count - Returns damage clips count.
815 * @state: Plane state.
816 *
817 * Simple helper to get the number of &drm_mode_rect clips set by user-space
818 * during plane update.
819 *
820 * Return: Number of clips in plane fb_damage_clips blob property.
821 */
822static inline unsigned int
823drm_plane_get_damage_clips_count(const struct drm_plane_state *state)
824{
825 return (state && state->fb_damage_clips) ?
826 state->fb_damage_clips->length/sizeof(struct drm_mode_rect) : 0;
827}
828
829/**
830 * drm_plane_get_damage_clips - Returns damage clips.
831 * @state: Plane state.
832 *
833 * Note that this function returns uapi type &drm_mode_rect. Drivers might
834 * instead be interested in internal &drm_rect which can be obtained by calling
835 * drm_helper_get_plane_damage_clips().
836 *
837 * Return: Damage clips in plane fb_damage_clips blob property.
838 */
839static inline struct drm_mode_rect *
840drm_plane_get_damage_clips(const struct drm_plane_state *state)
841{
842 return (struct drm_mode_rect *)((state && state->fb_damage_clips) ?
843 state->fb_damage_clips->data : NULL);
844}
845
846#endif