Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Amlogic SD/eMMC driver for the GX/S905 family SoCs
4 *
5 * Copyright (c) 2016 BayLibre, SAS.
6 * Author: Kevin Hilman <khilman@baylibre.com>
7 */
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/init.h>
11#include <linux/delay.h>
12#include <linux/device.h>
13#include <linux/iopoll.h>
14#include <linux/of_device.h>
15#include <linux/platform_device.h>
16#include <linux/ioport.h>
17#include <linux/dma-mapping.h>
18#include <linux/mmc/host.h>
19#include <linux/mmc/mmc.h>
20#include <linux/mmc/sdio.h>
21#include <linux/mmc/slot-gpio.h>
22#include <linux/io.h>
23#include <linux/clk.h>
24#include <linux/clk-provider.h>
25#include <linux/regulator/consumer.h>
26#include <linux/reset.h>
27#include <linux/interrupt.h>
28#include <linux/bitfield.h>
29#include <linux/pinctrl/consumer.h>
30
31#define DRIVER_NAME "meson-gx-mmc"
32
33#define SD_EMMC_CLOCK 0x0
34#define CLK_DIV_MASK GENMASK(5, 0)
35#define CLK_SRC_MASK GENMASK(7, 6)
36#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
37#define CLK_TX_PHASE_MASK GENMASK(11, 10)
38#define CLK_RX_PHASE_MASK GENMASK(13, 12)
39#define CLK_PHASE_0 0
40#define CLK_PHASE_180 2
41#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
42#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
43#define CLK_V2_ALWAYS_ON BIT(24)
44#define CLK_V2_IRQ_SDIO_SLEEP BIT(25)
45
46#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
47#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
48#define CLK_V3_ALWAYS_ON BIT(28)
49#define CLK_V3_IRQ_SDIO_SLEEP BIT(29)
50
51#define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask)
52#define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask)
53#define CLK_ALWAYS_ON(h) (h->data->always_on)
54#define CLK_IRQ_SDIO_SLEEP(h) (h->data->irq_sdio_sleep)
55
56#define SD_EMMC_DELAY 0x4
57#define SD_EMMC_ADJUST 0x8
58#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
59#define ADJUST_DS_EN BIT(15)
60#define ADJUST_ADJ_EN BIT(13)
61
62#define SD_EMMC_DELAY1 0x4
63#define SD_EMMC_DELAY2 0x8
64#define SD_EMMC_V3_ADJUST 0xc
65
66#define SD_EMMC_CALOUT 0x10
67#define SD_EMMC_START 0x40
68#define START_DESC_INIT BIT(0)
69#define START_DESC_BUSY BIT(1)
70#define START_DESC_ADDR_MASK GENMASK(31, 2)
71
72#define SD_EMMC_CFG 0x44
73#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
74#define CFG_BUS_WIDTH_1 0x0
75#define CFG_BUS_WIDTH_4 0x1
76#define CFG_BUS_WIDTH_8 0x2
77#define CFG_DDR BIT(2)
78#define CFG_BLK_LEN_MASK GENMASK(7, 4)
79#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
80#define CFG_RC_CC_MASK GENMASK(15, 12)
81#define CFG_STOP_CLOCK BIT(22)
82#define CFG_CLK_ALWAYS_ON BIT(18)
83#define CFG_CHK_DS BIT(20)
84#define CFG_AUTO_CLK BIT(23)
85#define CFG_ERR_ABORT BIT(27)
86
87#define SD_EMMC_STATUS 0x48
88#define STATUS_BUSY BIT(31)
89#define STATUS_DESC_BUSY BIT(30)
90#define STATUS_DATI GENMASK(23, 16)
91
92#define SD_EMMC_IRQ_EN 0x4c
93#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
94#define IRQ_TXD_ERR BIT(8)
95#define IRQ_DESC_ERR BIT(9)
96#define IRQ_RESP_ERR BIT(10)
97#define IRQ_CRC_ERR \
98 (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
99#define IRQ_RESP_TIMEOUT BIT(11)
100#define IRQ_DESC_TIMEOUT BIT(12)
101#define IRQ_TIMEOUTS \
102 (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
103#define IRQ_END_OF_CHAIN BIT(13)
104#define IRQ_RESP_STATUS BIT(14)
105#define IRQ_SDIO BIT(15)
106#define IRQ_EN_MASK \
107 (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN)
108
109#define SD_EMMC_CMD_CFG 0x50
110#define SD_EMMC_CMD_ARG 0x54
111#define SD_EMMC_CMD_DAT 0x58
112#define SD_EMMC_CMD_RSP 0x5c
113#define SD_EMMC_CMD_RSP1 0x60
114#define SD_EMMC_CMD_RSP2 0x64
115#define SD_EMMC_CMD_RSP3 0x68
116
117#define SD_EMMC_RXD 0x94
118#define SD_EMMC_TXD 0x94
119#define SD_EMMC_LAST_REG SD_EMMC_TXD
120
121#define SD_EMMC_SRAM_DATA_BUF_LEN 1536
122#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200
123
124#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
125#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
126#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
127#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
128#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
129#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
130
131#define SD_EMMC_PRE_REQ_DONE BIT(0)
132#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
133
134#define MUX_CLK_NUM_PARENTS 2
135
136struct meson_mmc_data {
137 unsigned int tx_delay_mask;
138 unsigned int rx_delay_mask;
139 unsigned int always_on;
140 unsigned int adjust;
141 unsigned int irq_sdio_sleep;
142};
143
144struct sd_emmc_desc {
145 u32 cmd_cfg;
146 u32 cmd_arg;
147 u32 cmd_data;
148 u32 cmd_resp;
149};
150
151struct meson_host {
152 struct device *dev;
153 struct meson_mmc_data *data;
154 struct mmc_host *mmc;
155 struct mmc_command *cmd;
156
157 void __iomem *regs;
158 struct clk *core_clk;
159 struct clk *mux_clk;
160 struct clk *mmc_clk;
161 unsigned long req_rate;
162 bool ddr;
163
164 bool dram_access_quirk;
165
166 struct pinctrl *pinctrl;
167 struct pinctrl_state *pins_clk_gate;
168
169 unsigned int bounce_buf_size;
170 void *bounce_buf;
171 void __iomem *bounce_iomem_buf;
172 dma_addr_t bounce_dma_addr;
173 struct sd_emmc_desc *descs;
174 dma_addr_t descs_dma_addr;
175
176 int irq;
177
178 bool vqmmc_enabled;
179 bool needs_pre_post_req;
180
181 spinlock_t lock;
182};
183
184#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
185#define CMD_CFG_BLOCK_MODE BIT(9)
186#define CMD_CFG_R1B BIT(10)
187#define CMD_CFG_END_OF_CHAIN BIT(11)
188#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
189#define CMD_CFG_NO_RESP BIT(16)
190#define CMD_CFG_NO_CMD BIT(17)
191#define CMD_CFG_DATA_IO BIT(18)
192#define CMD_CFG_DATA_WR BIT(19)
193#define CMD_CFG_RESP_NOCRC BIT(20)
194#define CMD_CFG_RESP_128 BIT(21)
195#define CMD_CFG_RESP_NUM BIT(22)
196#define CMD_CFG_DATA_NUM BIT(23)
197#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
198#define CMD_CFG_ERROR BIT(30)
199#define CMD_CFG_OWNER BIT(31)
200
201#define CMD_DATA_MASK GENMASK(31, 2)
202#define CMD_DATA_BIG_ENDIAN BIT(1)
203#define CMD_DATA_SRAM BIT(0)
204#define CMD_RESP_MASK GENMASK(31, 1)
205#define CMD_RESP_SRAM BIT(0)
206
207static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
208{
209 unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
210
211 if (!timeout)
212 return SD_EMMC_CMD_TIMEOUT_DATA;
213
214 timeout = roundup_pow_of_two(timeout);
215
216 return min(timeout, 32768U); /* max. 2^15 ms */
217}
218
219static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
220{
221 if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
222 return cmd->mrq->cmd;
223 else if (mmc_op_multi(cmd->opcode) &&
224 (!cmd->mrq->sbc || cmd->error || cmd->data->error))
225 return cmd->mrq->stop;
226 else
227 return NULL;
228}
229
230static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
231 struct mmc_request *mrq)
232{
233 struct meson_host *host = mmc_priv(mmc);
234 struct mmc_data *data = mrq->data;
235 struct scatterlist *sg;
236 int i;
237
238 /*
239 * When Controller DMA cannot directly access DDR memory, disable
240 * support for Chain Mode to directly use the internal SRAM using
241 * the bounce buffer mode.
242 */
243 if (host->dram_access_quirk)
244 return;
245
246 /* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */
247 if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) {
248 /*
249 * In block mode DMA descriptor format, "length" field indicates
250 * number of blocks and there is no way to pass DMA size that
251 * is not multiple of SDIO block size, making it impossible to
252 * tie more than one memory buffer with single SDIO block.
253 * Block mode sg buffer size should be aligned with SDIO block
254 * size, otherwise chain mode could not be used.
255 */
256 for_each_sg(data->sg, sg, data->sg_len, i) {
257 if (sg->length % data->blksz) {
258 dev_warn_once(mmc_dev(mmc),
259 "unaligned sg len %u blksize %u, disabling descriptor DMA for transfer\n",
260 sg->length, data->blksz);
261 return;
262 }
263 }
264 }
265
266 for_each_sg(data->sg, sg, data->sg_len, i) {
267 /* check for 8 byte alignment */
268 if (sg->offset % 8) {
269 dev_warn_once(mmc_dev(mmc),
270 "unaligned sg offset %u, disabling descriptor DMA for transfer\n",
271 sg->offset);
272 return;
273 }
274 }
275
276 data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
277}
278
279static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
280{
281 return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
282}
283
284static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
285{
286 return data && data->flags & MMC_DATA_READ &&
287 !meson_mmc_desc_chain_mode(data);
288}
289
290static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
291{
292 struct mmc_data *data = mrq->data;
293
294 if (!data)
295 return;
296
297 meson_mmc_get_transfer_mode(mmc, mrq);
298 data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
299
300 if (!meson_mmc_desc_chain_mode(data))
301 return;
302
303 data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
304 mmc_get_dma_dir(data));
305 if (!data->sg_count)
306 dev_err(mmc_dev(mmc), "dma_map_sg failed");
307}
308
309static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
310 int err)
311{
312 struct mmc_data *data = mrq->data;
313
314 if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
315 dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
316 mmc_get_dma_dir(data));
317}
318
319/*
320 * Gating the clock on this controller is tricky. It seems the mmc clock
321 * is also used by the controller. It may crash during some operation if the
322 * clock is stopped. The safest thing to do, whenever possible, is to keep
323 * clock running at stop it at the pad using the pinmux.
324 */
325static void meson_mmc_clk_gate(struct meson_host *host)
326{
327 u32 cfg;
328
329 if (host->pins_clk_gate) {
330 pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
331 } else {
332 /*
333 * If the pinmux is not provided - default to the classic and
334 * unsafe method
335 */
336 cfg = readl(host->regs + SD_EMMC_CFG);
337 cfg |= CFG_STOP_CLOCK;
338 writel(cfg, host->regs + SD_EMMC_CFG);
339 }
340}
341
342static void meson_mmc_clk_ungate(struct meson_host *host)
343{
344 u32 cfg;
345
346 if (host->pins_clk_gate)
347 pinctrl_select_default_state(host->dev);
348
349 /* Make sure the clock is not stopped in the controller */
350 cfg = readl(host->regs + SD_EMMC_CFG);
351 cfg &= ~CFG_STOP_CLOCK;
352 writel(cfg, host->regs + SD_EMMC_CFG);
353}
354
355static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate,
356 bool ddr)
357{
358 struct mmc_host *mmc = host->mmc;
359 int ret;
360 u32 cfg;
361
362 /* Same request - bail-out */
363 if (host->ddr == ddr && host->req_rate == rate)
364 return 0;
365
366 /* stop clock */
367 meson_mmc_clk_gate(host);
368 host->req_rate = 0;
369 mmc->actual_clock = 0;
370
371 /* return with clock being stopped */
372 if (!rate)
373 return 0;
374
375 /* Stop the clock during rate change to avoid glitches */
376 cfg = readl(host->regs + SD_EMMC_CFG);
377 cfg |= CFG_STOP_CLOCK;
378 writel(cfg, host->regs + SD_EMMC_CFG);
379
380 if (ddr) {
381 /* DDR modes require higher module clock */
382 rate <<= 1;
383 cfg |= CFG_DDR;
384 } else {
385 cfg &= ~CFG_DDR;
386 }
387 writel(cfg, host->regs + SD_EMMC_CFG);
388 host->ddr = ddr;
389
390 ret = clk_set_rate(host->mmc_clk, rate);
391 if (ret) {
392 dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
393 rate, ret);
394 return ret;
395 }
396
397 host->req_rate = rate;
398 mmc->actual_clock = clk_get_rate(host->mmc_clk);
399
400 /* We should report the real output frequency of the controller */
401 if (ddr) {
402 host->req_rate >>= 1;
403 mmc->actual_clock >>= 1;
404 }
405
406 dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
407 if (rate != mmc->actual_clock)
408 dev_dbg(host->dev, "requested rate was %lu\n", rate);
409
410 /* (re)start clock */
411 meson_mmc_clk_ungate(host);
412
413 return 0;
414}
415
416/*
417 * The SD/eMMC IP block has an internal mux and divider used for
418 * generating the MMC clock. Use the clock framework to create and
419 * manage these clocks.
420 */
421static int meson_mmc_clk_init(struct meson_host *host)
422{
423 struct clk_init_data init;
424 struct clk_mux *mux;
425 struct clk_divider *div;
426 char clk_name[32];
427 int i, ret = 0;
428 const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
429 const char *clk_parent[1];
430 u32 clk_reg;
431
432 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
433 clk_reg = CLK_ALWAYS_ON(host);
434 clk_reg |= CLK_DIV_MASK;
435 clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
436 clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
437 clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
438 if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
439 clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
440 writel(clk_reg, host->regs + SD_EMMC_CLOCK);
441
442 /* get the mux parents */
443 for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
444 struct clk *clk;
445 char name[16];
446
447 snprintf(name, sizeof(name), "clkin%d", i);
448 clk = devm_clk_get(host->dev, name);
449 if (IS_ERR(clk))
450 return dev_err_probe(host->dev, PTR_ERR(clk),
451 "Missing clock %s\n", name);
452
453 mux_parent_names[i] = __clk_get_name(clk);
454 }
455
456 /* create the mux */
457 mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
458 if (!mux)
459 return -ENOMEM;
460
461 snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
462 init.name = clk_name;
463 init.ops = &clk_mux_ops;
464 init.flags = 0;
465 init.parent_names = mux_parent_names;
466 init.num_parents = MUX_CLK_NUM_PARENTS;
467
468 mux->reg = host->regs + SD_EMMC_CLOCK;
469 mux->shift = __ffs(CLK_SRC_MASK);
470 mux->mask = CLK_SRC_MASK >> mux->shift;
471 mux->hw.init = &init;
472
473 host->mux_clk = devm_clk_register(host->dev, &mux->hw);
474 if (WARN_ON(IS_ERR(host->mux_clk)))
475 return PTR_ERR(host->mux_clk);
476
477 /* create the divider */
478 div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
479 if (!div)
480 return -ENOMEM;
481
482 snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
483 init.name = clk_name;
484 init.ops = &clk_divider_ops;
485 init.flags = CLK_SET_RATE_PARENT;
486 clk_parent[0] = __clk_get_name(host->mux_clk);
487 init.parent_names = clk_parent;
488 init.num_parents = 1;
489
490 div->reg = host->regs + SD_EMMC_CLOCK;
491 div->shift = __ffs(CLK_DIV_MASK);
492 div->width = __builtin_popcountl(CLK_DIV_MASK);
493 div->hw.init = &init;
494 div->flags = CLK_DIVIDER_ONE_BASED;
495
496 host->mmc_clk = devm_clk_register(host->dev, &div->hw);
497 if (WARN_ON(IS_ERR(host->mmc_clk)))
498 return PTR_ERR(host->mmc_clk);
499
500 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
501 host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
502 ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
503 if (ret)
504 return ret;
505
506 return clk_prepare_enable(host->mmc_clk);
507}
508
509static void meson_mmc_disable_resampling(struct meson_host *host)
510{
511 unsigned int val = readl(host->regs + host->data->adjust);
512
513 val &= ~ADJUST_ADJ_EN;
514 writel(val, host->regs + host->data->adjust);
515}
516
517static void meson_mmc_reset_resampling(struct meson_host *host)
518{
519 unsigned int val;
520
521 meson_mmc_disable_resampling(host);
522
523 val = readl(host->regs + host->data->adjust);
524 val &= ~ADJUST_ADJ_DELAY_MASK;
525 writel(val, host->regs + host->data->adjust);
526}
527
528static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode)
529{
530 struct meson_host *host = mmc_priv(mmc);
531 unsigned int val, dly, max_dly, i;
532 int ret;
533
534 /* Resampling is done using the source clock */
535 max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk),
536 clk_get_rate(host->mmc_clk));
537
538 val = readl(host->regs + host->data->adjust);
539 val |= ADJUST_ADJ_EN;
540 writel(val, host->regs + host->data->adjust);
541
542 if (mmc_doing_retune(mmc))
543 dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1;
544 else
545 dly = 0;
546
547 for (i = 0; i < max_dly; i++) {
548 val &= ~ADJUST_ADJ_DELAY_MASK;
549 val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly);
550 writel(val, host->regs + host->data->adjust);
551
552 ret = mmc_send_tuning(mmc, opcode, NULL);
553 if (!ret) {
554 dev_dbg(mmc_dev(mmc), "resampling delay: %u\n",
555 (dly + i) % max_dly);
556 return 0;
557 }
558 }
559
560 meson_mmc_reset_resampling(host);
561 return -EIO;
562}
563
564static int meson_mmc_prepare_ios_clock(struct meson_host *host,
565 struct mmc_ios *ios)
566{
567 bool ddr;
568
569 switch (ios->timing) {
570 case MMC_TIMING_MMC_DDR52:
571 case MMC_TIMING_UHS_DDR50:
572 ddr = true;
573 break;
574
575 default:
576 ddr = false;
577 break;
578 }
579
580 return meson_mmc_clk_set(host, ios->clock, ddr);
581}
582
583static void meson_mmc_check_resampling(struct meson_host *host,
584 struct mmc_ios *ios)
585{
586 switch (ios->timing) {
587 case MMC_TIMING_LEGACY:
588 case MMC_TIMING_MMC_HS:
589 case MMC_TIMING_SD_HS:
590 case MMC_TIMING_MMC_DDR52:
591 meson_mmc_disable_resampling(host);
592 break;
593 }
594}
595
596static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
597{
598 struct meson_host *host = mmc_priv(mmc);
599 u32 bus_width, val;
600 int err;
601
602 /*
603 * GPIO regulator, only controls switching between 1v8 and
604 * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
605 */
606 switch (ios->power_mode) {
607 case MMC_POWER_OFF:
608 if (!IS_ERR(mmc->supply.vmmc))
609 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
610
611 if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
612 regulator_disable(mmc->supply.vqmmc);
613 host->vqmmc_enabled = false;
614 }
615
616 break;
617
618 case MMC_POWER_UP:
619 if (!IS_ERR(mmc->supply.vmmc))
620 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
621
622 break;
623
624 case MMC_POWER_ON:
625 if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
626 int ret = regulator_enable(mmc->supply.vqmmc);
627
628 if (ret < 0)
629 dev_err(host->dev,
630 "failed to enable vqmmc regulator\n");
631 else
632 host->vqmmc_enabled = true;
633 }
634
635 break;
636 }
637
638 /* Bus width */
639 switch (ios->bus_width) {
640 case MMC_BUS_WIDTH_1:
641 bus_width = CFG_BUS_WIDTH_1;
642 break;
643 case MMC_BUS_WIDTH_4:
644 bus_width = CFG_BUS_WIDTH_4;
645 break;
646 case MMC_BUS_WIDTH_8:
647 bus_width = CFG_BUS_WIDTH_8;
648 break;
649 default:
650 dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
651 ios->bus_width);
652 bus_width = CFG_BUS_WIDTH_4;
653 }
654
655 val = readl(host->regs + SD_EMMC_CFG);
656 val &= ~CFG_BUS_WIDTH_MASK;
657 val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
658 writel(val, host->regs + SD_EMMC_CFG);
659
660 meson_mmc_check_resampling(host, ios);
661 err = meson_mmc_prepare_ios_clock(host, ios);
662 if (err)
663 dev_err(host->dev, "Failed to set clock: %d\n,", err);
664
665 dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val);
666}
667
668static void meson_mmc_request_done(struct mmc_host *mmc,
669 struct mmc_request *mrq)
670{
671 struct meson_host *host = mmc_priv(mmc);
672
673 host->cmd = NULL;
674 if (host->needs_pre_post_req)
675 meson_mmc_post_req(mmc, mrq, 0);
676 mmc_request_done(host->mmc, mrq);
677}
678
679static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
680{
681 struct meson_host *host = mmc_priv(mmc);
682 u32 cfg, blksz_old;
683
684 cfg = readl(host->regs + SD_EMMC_CFG);
685 blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
686
687 if (!is_power_of_2(blksz))
688 dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
689
690 blksz = ilog2(blksz);
691
692 /* check if block-size matches, if not update */
693 if (blksz == blksz_old)
694 return;
695
696 dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
697 blksz_old, blksz);
698
699 cfg &= ~CFG_BLK_LEN_MASK;
700 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
701 writel(cfg, host->regs + SD_EMMC_CFG);
702}
703
704static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
705{
706 if (cmd->flags & MMC_RSP_PRESENT) {
707 if (cmd->flags & MMC_RSP_136)
708 *cmd_cfg |= CMD_CFG_RESP_128;
709 *cmd_cfg |= CMD_CFG_RESP_NUM;
710
711 if (!(cmd->flags & MMC_RSP_CRC))
712 *cmd_cfg |= CMD_CFG_RESP_NOCRC;
713
714 if (cmd->flags & MMC_RSP_BUSY)
715 *cmd_cfg |= CMD_CFG_R1B;
716 } else {
717 *cmd_cfg |= CMD_CFG_NO_RESP;
718 }
719}
720
721static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
722{
723 struct meson_host *host = mmc_priv(mmc);
724 struct sd_emmc_desc *desc = host->descs;
725 struct mmc_data *data = host->cmd->data;
726 struct scatterlist *sg;
727 u32 start;
728 int i;
729
730 if (data->flags & MMC_DATA_WRITE)
731 cmd_cfg |= CMD_CFG_DATA_WR;
732
733 if (data->blocks > 1) {
734 cmd_cfg |= CMD_CFG_BLOCK_MODE;
735 meson_mmc_set_blksz(mmc, data->blksz);
736 }
737
738 for_each_sg(data->sg, sg, data->sg_count, i) {
739 unsigned int len = sg_dma_len(sg);
740
741 if (data->blocks > 1)
742 len /= data->blksz;
743
744 desc[i].cmd_cfg = cmd_cfg;
745 desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
746 if (i > 0)
747 desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
748 desc[i].cmd_arg = host->cmd->arg;
749 desc[i].cmd_resp = 0;
750 desc[i].cmd_data = sg_dma_address(sg);
751 }
752 desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
753
754 dma_wmb(); /* ensure descriptor is written before kicked */
755 start = host->descs_dma_addr | START_DESC_BUSY;
756 writel(start, host->regs + SD_EMMC_START);
757}
758
759/* local sg copy for dram_access_quirk */
760static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
761 size_t buflen, bool to_buffer)
762{
763 unsigned int sg_flags = SG_MITER_ATOMIC;
764 struct scatterlist *sgl = data->sg;
765 unsigned int nents = data->sg_len;
766 struct sg_mapping_iter miter;
767 unsigned int offset = 0;
768
769 if (to_buffer)
770 sg_flags |= SG_MITER_FROM_SG;
771 else
772 sg_flags |= SG_MITER_TO_SG;
773
774 sg_miter_start(&miter, sgl, nents, sg_flags);
775
776 while ((offset < buflen) && sg_miter_next(&miter)) {
777 unsigned int buf_offset = 0;
778 unsigned int len, left;
779 u32 *buf = miter.addr;
780
781 len = min(miter.length, buflen - offset);
782 left = len;
783
784 if (to_buffer) {
785 do {
786 writel(*buf++, host->bounce_iomem_buf + offset + buf_offset);
787
788 buf_offset += 4;
789 left -= 4;
790 } while (left);
791 } else {
792 do {
793 *buf++ = readl(host->bounce_iomem_buf + offset + buf_offset);
794
795 buf_offset += 4;
796 left -= 4;
797 } while (left);
798 }
799
800 offset += len;
801 }
802
803 sg_miter_stop(&miter);
804}
805
806static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
807{
808 struct meson_host *host = mmc_priv(mmc);
809 struct mmc_data *data = cmd->data;
810 u32 cmd_cfg = 0, cmd_data = 0;
811 unsigned int xfer_bytes = 0;
812
813 /* Setup descriptors */
814 dma_rmb();
815
816 host->cmd = cmd;
817
818 cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
819 cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
820 cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
821
822 meson_mmc_set_response_bits(cmd, &cmd_cfg);
823
824 /* data? */
825 if (data) {
826 data->bytes_xfered = 0;
827 cmd_cfg |= CMD_CFG_DATA_IO;
828 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
829 ilog2(meson_mmc_get_timeout_msecs(data)));
830
831 if (meson_mmc_desc_chain_mode(data)) {
832 meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
833 return;
834 }
835
836 if (data->blocks > 1) {
837 cmd_cfg |= CMD_CFG_BLOCK_MODE;
838 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
839 data->blocks);
840 meson_mmc_set_blksz(mmc, data->blksz);
841 } else {
842 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
843 }
844
845 xfer_bytes = data->blksz * data->blocks;
846 if (data->flags & MMC_DATA_WRITE) {
847 cmd_cfg |= CMD_CFG_DATA_WR;
848 WARN_ON(xfer_bytes > host->bounce_buf_size);
849 if (host->dram_access_quirk)
850 meson_mmc_copy_buffer(host, data, xfer_bytes, true);
851 else
852 sg_copy_to_buffer(data->sg, data->sg_len,
853 host->bounce_buf, xfer_bytes);
854 dma_wmb();
855 }
856
857 cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
858 } else {
859 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
860 ilog2(SD_EMMC_CMD_TIMEOUT));
861 }
862
863 /* Last descriptor */
864 cmd_cfg |= CMD_CFG_END_OF_CHAIN;
865 writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
866 writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
867 writel(0, host->regs + SD_EMMC_CMD_RSP);
868 wmb(); /* ensure descriptor is written before kicked */
869 writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
870}
871
872static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data)
873{
874 struct scatterlist *sg;
875 int i;
876
877 /* Reject request if any element offset or size is not 32bit aligned */
878 for_each_sg(data->sg, sg, data->sg_len, i) {
879 if (!IS_ALIGNED(sg->offset, sizeof(u32)) ||
880 !IS_ALIGNED(sg->length, sizeof(u32))) {
881 dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n",
882 data->sg->offset, data->sg->length);
883 return -EINVAL;
884 }
885 }
886
887 return 0;
888}
889
890static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
891{
892 struct meson_host *host = mmc_priv(mmc);
893 host->needs_pre_post_req = mrq->data &&
894 !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
895
896 /*
897 * The memory at the end of the controller used as bounce buffer for
898 * the dram_access_quirk only accepts 32bit read/write access,
899 * check the aligment and length of the data before starting the request.
900 */
901 if (host->dram_access_quirk && mrq->data) {
902 mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
903 if (mrq->cmd->error) {
904 mmc_request_done(mmc, mrq);
905 return;
906 }
907 }
908
909 if (host->needs_pre_post_req) {
910 meson_mmc_get_transfer_mode(mmc, mrq);
911 if (!meson_mmc_desc_chain_mode(mrq->data))
912 host->needs_pre_post_req = false;
913 }
914
915 if (host->needs_pre_post_req)
916 meson_mmc_pre_req(mmc, mrq);
917
918 /* Stop execution */
919 writel(0, host->regs + SD_EMMC_START);
920
921 meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
922}
923
924static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
925{
926 struct meson_host *host = mmc_priv(mmc);
927
928 if (cmd->flags & MMC_RSP_136) {
929 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
930 cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
931 cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
932 cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
933 } else if (cmd->flags & MMC_RSP_PRESENT) {
934 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
935 }
936}
937
938static void __meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
939{
940 struct meson_host *host = mmc_priv(mmc);
941 u32 reg_irqen = IRQ_EN_MASK;
942
943 if (enable)
944 reg_irqen |= IRQ_SDIO;
945 writel(reg_irqen, host->regs + SD_EMMC_IRQ_EN);
946}
947
948static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
949{
950 struct meson_host *host = dev_id;
951 struct mmc_command *cmd;
952 u32 status, raw_status, irq_mask = IRQ_EN_MASK;
953 irqreturn_t ret = IRQ_NONE;
954
955 if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
956 irq_mask |= IRQ_SDIO;
957 raw_status = readl(host->regs + SD_EMMC_STATUS);
958 status = raw_status & irq_mask;
959
960 if (!status) {
961 dev_dbg(host->dev,
962 "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
963 irq_mask, raw_status);
964 return IRQ_NONE;
965 }
966
967 if (WARN_ON(!host))
968 return IRQ_NONE;
969
970 /* ack all raised interrupts */
971 writel(status, host->regs + SD_EMMC_STATUS);
972
973 cmd = host->cmd;
974
975 if (status & IRQ_SDIO) {
976 spin_lock(&host->lock);
977 __meson_mmc_enable_sdio_irq(host->mmc, 0);
978 sdio_signal_irq(host->mmc);
979 spin_unlock(&host->lock);
980 status &= ~IRQ_SDIO;
981 if (!status)
982 return IRQ_HANDLED;
983 }
984
985 if (WARN_ON(!cmd))
986 return IRQ_NONE;
987
988 cmd->error = 0;
989 if (status & IRQ_CRC_ERR) {
990 dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
991 cmd->error = -EILSEQ;
992 ret = IRQ_WAKE_THREAD;
993 goto out;
994 }
995
996 if (status & IRQ_TIMEOUTS) {
997 dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
998 cmd->error = -ETIMEDOUT;
999 ret = IRQ_WAKE_THREAD;
1000 goto out;
1001 }
1002
1003 meson_mmc_read_resp(host->mmc, cmd);
1004
1005 if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
1006 struct mmc_data *data = cmd->data;
1007
1008 if (data && !cmd->error)
1009 data->bytes_xfered = data->blksz * data->blocks;
1010 if (meson_mmc_bounce_buf_read(data) ||
1011 meson_mmc_get_next_command(cmd))
1012 ret = IRQ_WAKE_THREAD;
1013 else
1014 ret = IRQ_HANDLED;
1015 }
1016
1017out:
1018 if (cmd->error) {
1019 /* Stop desc in case of errors */
1020 u32 start = readl(host->regs + SD_EMMC_START);
1021
1022 start &= ~START_DESC_BUSY;
1023 writel(start, host->regs + SD_EMMC_START);
1024 }
1025
1026 if (ret == IRQ_HANDLED)
1027 meson_mmc_request_done(host->mmc, cmd->mrq);
1028
1029 return ret;
1030}
1031
1032static int meson_mmc_wait_desc_stop(struct meson_host *host)
1033{
1034 u32 status;
1035
1036 /*
1037 * It may sometimes take a while for it to actually halt. Here, we
1038 * are giving it 5ms to comply
1039 *
1040 * If we don't confirm the descriptor is stopped, it might raise new
1041 * IRQs after we have called mmc_request_done() which is bad.
1042 */
1043
1044 return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status,
1045 !(status & (STATUS_BUSY | STATUS_DESC_BUSY)),
1046 100, 5000);
1047}
1048
1049static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
1050{
1051 struct meson_host *host = dev_id;
1052 struct mmc_command *next_cmd, *cmd = host->cmd;
1053 struct mmc_data *data;
1054 unsigned int xfer_bytes;
1055
1056 if (WARN_ON(!cmd))
1057 return IRQ_NONE;
1058
1059 if (cmd->error) {
1060 meson_mmc_wait_desc_stop(host);
1061 meson_mmc_request_done(host->mmc, cmd->mrq);
1062
1063 return IRQ_HANDLED;
1064 }
1065
1066 data = cmd->data;
1067 if (meson_mmc_bounce_buf_read(data)) {
1068 xfer_bytes = data->blksz * data->blocks;
1069 WARN_ON(xfer_bytes > host->bounce_buf_size);
1070 if (host->dram_access_quirk)
1071 meson_mmc_copy_buffer(host, data, xfer_bytes, false);
1072 else
1073 sg_copy_from_buffer(data->sg, data->sg_len,
1074 host->bounce_buf, xfer_bytes);
1075 }
1076
1077 next_cmd = meson_mmc_get_next_command(cmd);
1078 if (next_cmd)
1079 meson_mmc_start_cmd(host->mmc, next_cmd);
1080 else
1081 meson_mmc_request_done(host->mmc, cmd->mrq);
1082
1083 return IRQ_HANDLED;
1084}
1085
1086/*
1087 * NOTE: we only need this until the GPIO/pinctrl driver can handle
1088 * interrupts. For now, the MMC core will use this for polling.
1089 */
1090static int meson_mmc_get_cd(struct mmc_host *mmc)
1091{
1092 int status = mmc_gpio_get_cd(mmc);
1093
1094 if (status == -ENOSYS)
1095 return 1; /* assume present */
1096
1097 return status;
1098}
1099
1100static void meson_mmc_cfg_init(struct meson_host *host)
1101{
1102 u32 cfg = 0;
1103
1104 cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
1105 ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
1106 cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
1107 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
1108
1109 /* abort chain on R/W errors */
1110 cfg |= CFG_ERR_ABORT;
1111
1112 writel(cfg, host->regs + SD_EMMC_CFG);
1113}
1114
1115static int meson_mmc_card_busy(struct mmc_host *mmc)
1116{
1117 struct meson_host *host = mmc_priv(mmc);
1118 u32 regval;
1119
1120 regval = readl(host->regs + SD_EMMC_STATUS);
1121
1122 /* We are only interrested in lines 0 to 3, so mask the other ones */
1123 return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
1124}
1125
1126static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
1127{
1128 int ret;
1129
1130 /* vqmmc regulator is available */
1131 if (!IS_ERR(mmc->supply.vqmmc)) {
1132 /*
1133 * The usual amlogic setup uses a GPIO to switch from one
1134 * regulator to the other. While the voltage ramp up is
1135 * pretty fast, care must be taken when switching from 3.3v
1136 * to 1.8v. Please make sure the regulator framework is aware
1137 * of your own regulator constraints
1138 */
1139 ret = mmc_regulator_set_vqmmc(mmc, ios);
1140 return ret < 0 ? ret : 0;
1141 }
1142
1143 /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
1144 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1145 return 0;
1146
1147 return -EINVAL;
1148}
1149
1150static void meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
1151{
1152 struct meson_host *host = mmc_priv(mmc);
1153 unsigned long flags;
1154
1155 spin_lock_irqsave(&host->lock, flags);
1156 __meson_mmc_enable_sdio_irq(mmc, enable);
1157 spin_unlock_irqrestore(&host->lock, flags);
1158}
1159
1160static void meson_mmc_ack_sdio_irq(struct mmc_host *mmc)
1161{
1162 meson_mmc_enable_sdio_irq(mmc, 1);
1163}
1164
1165static const struct mmc_host_ops meson_mmc_ops = {
1166 .request = meson_mmc_request,
1167 .set_ios = meson_mmc_set_ios,
1168 .get_cd = meson_mmc_get_cd,
1169 .pre_req = meson_mmc_pre_req,
1170 .post_req = meson_mmc_post_req,
1171 .execute_tuning = meson_mmc_resampling_tuning,
1172 .card_busy = meson_mmc_card_busy,
1173 .start_signal_voltage_switch = meson_mmc_voltage_switch,
1174 .enable_sdio_irq = meson_mmc_enable_sdio_irq,
1175 .ack_sdio_irq = meson_mmc_ack_sdio_irq,
1176};
1177
1178static int meson_mmc_probe(struct platform_device *pdev)
1179{
1180 struct resource *res;
1181 struct meson_host *host;
1182 struct mmc_host *mmc;
1183 int ret;
1184
1185 mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
1186 if (!mmc)
1187 return -ENOMEM;
1188 host = mmc_priv(mmc);
1189 host->mmc = mmc;
1190 host->dev = &pdev->dev;
1191 dev_set_drvdata(&pdev->dev, host);
1192
1193 /* The G12A SDIO Controller needs an SRAM bounce buffer */
1194 host->dram_access_quirk = device_property_read_bool(&pdev->dev,
1195 "amlogic,dram-access-quirk");
1196
1197 /* Get regulators and the supported OCR mask */
1198 host->vqmmc_enabled = false;
1199 ret = mmc_regulator_get_supply(mmc);
1200 if (ret)
1201 goto free_host;
1202
1203 ret = mmc_of_parse(mmc);
1204 if (ret) {
1205 if (ret != -EPROBE_DEFER)
1206 dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
1207 goto free_host;
1208 }
1209
1210 mmc->caps |= MMC_CAP_CMD23;
1211
1212 if (mmc->caps & MMC_CAP_SDIO_IRQ)
1213 mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
1214
1215 host->data = (struct meson_mmc_data *)
1216 of_device_get_match_data(&pdev->dev);
1217 if (!host->data) {
1218 ret = -EINVAL;
1219 goto free_host;
1220 }
1221
1222 ret = device_reset_optional(&pdev->dev);
1223 if (ret) {
1224 dev_err_probe(&pdev->dev, ret, "device reset failed\n");
1225 goto free_host;
1226 }
1227
1228 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1229 host->regs = devm_ioremap_resource(&pdev->dev, res);
1230 if (IS_ERR(host->regs)) {
1231 ret = PTR_ERR(host->regs);
1232 goto free_host;
1233 }
1234
1235 host->irq = platform_get_irq(pdev, 0);
1236 if (host->irq <= 0) {
1237 ret = -EINVAL;
1238 goto free_host;
1239 }
1240
1241 host->pinctrl = devm_pinctrl_get(&pdev->dev);
1242 if (IS_ERR(host->pinctrl)) {
1243 ret = PTR_ERR(host->pinctrl);
1244 goto free_host;
1245 }
1246
1247 host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
1248 "clk-gate");
1249 if (IS_ERR(host->pins_clk_gate)) {
1250 dev_warn(&pdev->dev,
1251 "can't get clk-gate pinctrl, using clk_stop bit\n");
1252 host->pins_clk_gate = NULL;
1253 }
1254
1255 host->core_clk = devm_clk_get(&pdev->dev, "core");
1256 if (IS_ERR(host->core_clk)) {
1257 ret = PTR_ERR(host->core_clk);
1258 goto free_host;
1259 }
1260
1261 ret = clk_prepare_enable(host->core_clk);
1262 if (ret)
1263 goto free_host;
1264
1265 ret = meson_mmc_clk_init(host);
1266 if (ret)
1267 goto err_core_clk;
1268
1269 /* set config to sane default */
1270 meson_mmc_cfg_init(host);
1271
1272 /* Stop execution */
1273 writel(0, host->regs + SD_EMMC_START);
1274
1275 /* clear, ack and enable interrupts */
1276 writel(0, host->regs + SD_EMMC_IRQ_EN);
1277 writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
1278 writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
1279
1280 ret = request_threaded_irq(host->irq, meson_mmc_irq,
1281 meson_mmc_irq_thread, IRQF_ONESHOT,
1282 dev_name(&pdev->dev), host);
1283 if (ret)
1284 goto err_init_clk;
1285
1286 spin_lock_init(&host->lock);
1287
1288 if (host->dram_access_quirk) {
1289 /* Limit segments to 1 due to low available sram memory */
1290 mmc->max_segs = 1;
1291 /* Limit to the available sram memory */
1292 mmc->max_blk_count = SD_EMMC_SRAM_DATA_BUF_LEN /
1293 mmc->max_blk_size;
1294 } else {
1295 mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
1296 mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
1297 sizeof(struct sd_emmc_desc);
1298 }
1299 mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
1300 mmc->max_seg_size = mmc->max_req_size;
1301
1302 /*
1303 * At the moment, we don't know how to reliably enable HS400.
1304 * From the different datasheets, it is not even clear if this mode
1305 * is officially supported by any of the SoCs
1306 */
1307 mmc->caps2 &= ~MMC_CAP2_HS400;
1308
1309 if (host->dram_access_quirk) {
1310 /*
1311 * The MMC Controller embeds 1,5KiB of internal SRAM
1312 * that can be used to be used as bounce buffer.
1313 * In the case of the G12A SDIO controller, use these
1314 * instead of the DDR memory
1315 */
1316 host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
1317 host->bounce_iomem_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
1318 host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
1319 } else {
1320 /* data bounce buffer */
1321 host->bounce_buf_size = mmc->max_req_size;
1322 host->bounce_buf =
1323 dmam_alloc_coherent(host->dev, host->bounce_buf_size,
1324 &host->bounce_dma_addr, GFP_KERNEL);
1325 if (host->bounce_buf == NULL) {
1326 dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
1327 ret = -ENOMEM;
1328 goto err_free_irq;
1329 }
1330 }
1331
1332 host->descs = dmam_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1333 &host->descs_dma_addr, GFP_KERNEL);
1334 if (!host->descs) {
1335 dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
1336 ret = -ENOMEM;
1337 goto err_free_irq;
1338 }
1339
1340 mmc->ops = &meson_mmc_ops;
1341 ret = mmc_add_host(mmc);
1342 if (ret)
1343 goto err_free_irq;
1344
1345 return 0;
1346
1347err_free_irq:
1348 free_irq(host->irq, host);
1349err_init_clk:
1350 clk_disable_unprepare(host->mmc_clk);
1351err_core_clk:
1352 clk_disable_unprepare(host->core_clk);
1353free_host:
1354 mmc_free_host(mmc);
1355 return ret;
1356}
1357
1358static int meson_mmc_remove(struct platform_device *pdev)
1359{
1360 struct meson_host *host = dev_get_drvdata(&pdev->dev);
1361
1362 mmc_remove_host(host->mmc);
1363
1364 /* disable interrupts */
1365 writel(0, host->regs + SD_EMMC_IRQ_EN);
1366 free_irq(host->irq, host);
1367
1368 clk_disable_unprepare(host->mmc_clk);
1369 clk_disable_unprepare(host->core_clk);
1370
1371 mmc_free_host(host->mmc);
1372 return 0;
1373}
1374
1375static const struct meson_mmc_data meson_gx_data = {
1376 .tx_delay_mask = CLK_V2_TX_DELAY_MASK,
1377 .rx_delay_mask = CLK_V2_RX_DELAY_MASK,
1378 .always_on = CLK_V2_ALWAYS_ON,
1379 .adjust = SD_EMMC_ADJUST,
1380 .irq_sdio_sleep = CLK_V2_IRQ_SDIO_SLEEP,
1381};
1382
1383static const struct meson_mmc_data meson_axg_data = {
1384 .tx_delay_mask = CLK_V3_TX_DELAY_MASK,
1385 .rx_delay_mask = CLK_V3_RX_DELAY_MASK,
1386 .always_on = CLK_V3_ALWAYS_ON,
1387 .adjust = SD_EMMC_V3_ADJUST,
1388 .irq_sdio_sleep = CLK_V3_IRQ_SDIO_SLEEP,
1389};
1390
1391static const struct of_device_id meson_mmc_of_match[] = {
1392 { .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data },
1393 { .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data },
1394 { .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data },
1395 { .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data },
1396 { .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data },
1397 {}
1398};
1399MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
1400
1401static struct platform_driver meson_mmc_driver = {
1402 .probe = meson_mmc_probe,
1403 .remove = meson_mmc_remove,
1404 .driver = {
1405 .name = DRIVER_NAME,
1406 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
1407 .of_match_table = meson_mmc_of_match,
1408 },
1409};
1410
1411module_platform_driver(meson_mmc_driver);
1412
1413MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver");
1414MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
1415MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Amlogic SD/eMMC driver for the GX/S905 family SoCs
4 *
5 * Copyright (c) 2016 BayLibre, SAS.
6 * Author: Kevin Hilman <khilman@baylibre.com>
7 */
8#include <linux/kernel.h>
9#include <linux/module.h>
10#include <linux/init.h>
11#include <linux/delay.h>
12#include <linux/device.h>
13#include <linux/iopoll.h>
14#include <linux/of_device.h>
15#include <linux/platform_device.h>
16#include <linux/ioport.h>
17#include <linux/dma-mapping.h>
18#include <linux/mmc/host.h>
19#include <linux/mmc/mmc.h>
20#include <linux/mmc/sdio.h>
21#include <linux/mmc/slot-gpio.h>
22#include <linux/io.h>
23#include <linux/clk.h>
24#include <linux/clk-provider.h>
25#include <linux/regulator/consumer.h>
26#include <linux/reset.h>
27#include <linux/interrupt.h>
28#include <linux/bitfield.h>
29#include <linux/pinctrl/consumer.h>
30
31#define DRIVER_NAME "meson-gx-mmc"
32
33#define SD_EMMC_CLOCK 0x0
34#define CLK_DIV_MASK GENMASK(5, 0)
35#define CLK_SRC_MASK GENMASK(7, 6)
36#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
37#define CLK_TX_PHASE_MASK GENMASK(11, 10)
38#define CLK_RX_PHASE_MASK GENMASK(13, 12)
39#define CLK_PHASE_0 0
40#define CLK_PHASE_180 2
41#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
42#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
43#define CLK_V2_ALWAYS_ON BIT(24)
44
45#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
46#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
47#define CLK_V3_ALWAYS_ON BIT(28)
48
49#define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask)
50#define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask)
51#define CLK_ALWAYS_ON(h) (h->data->always_on)
52
53#define SD_EMMC_DELAY 0x4
54#define SD_EMMC_ADJUST 0x8
55#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
56#define ADJUST_DS_EN BIT(15)
57#define ADJUST_ADJ_EN BIT(13)
58
59#define SD_EMMC_DELAY1 0x4
60#define SD_EMMC_DELAY2 0x8
61#define SD_EMMC_V3_ADJUST 0xc
62
63#define SD_EMMC_CALOUT 0x10
64#define SD_EMMC_START 0x40
65#define START_DESC_INIT BIT(0)
66#define START_DESC_BUSY BIT(1)
67#define START_DESC_ADDR_MASK GENMASK(31, 2)
68
69#define SD_EMMC_CFG 0x44
70#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
71#define CFG_BUS_WIDTH_1 0x0
72#define CFG_BUS_WIDTH_4 0x1
73#define CFG_BUS_WIDTH_8 0x2
74#define CFG_DDR BIT(2)
75#define CFG_BLK_LEN_MASK GENMASK(7, 4)
76#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
77#define CFG_RC_CC_MASK GENMASK(15, 12)
78#define CFG_STOP_CLOCK BIT(22)
79#define CFG_CLK_ALWAYS_ON BIT(18)
80#define CFG_CHK_DS BIT(20)
81#define CFG_AUTO_CLK BIT(23)
82#define CFG_ERR_ABORT BIT(27)
83
84#define SD_EMMC_STATUS 0x48
85#define STATUS_BUSY BIT(31)
86#define STATUS_DESC_BUSY BIT(30)
87#define STATUS_DATI GENMASK(23, 16)
88
89#define SD_EMMC_IRQ_EN 0x4c
90#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
91#define IRQ_TXD_ERR BIT(8)
92#define IRQ_DESC_ERR BIT(9)
93#define IRQ_RESP_ERR BIT(10)
94#define IRQ_CRC_ERR \
95 (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
96#define IRQ_RESP_TIMEOUT BIT(11)
97#define IRQ_DESC_TIMEOUT BIT(12)
98#define IRQ_TIMEOUTS \
99 (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
100#define IRQ_END_OF_CHAIN BIT(13)
101#define IRQ_RESP_STATUS BIT(14)
102#define IRQ_SDIO BIT(15)
103#define IRQ_EN_MASK \
104 (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\
105 IRQ_SDIO)
106
107#define SD_EMMC_CMD_CFG 0x50
108#define SD_EMMC_CMD_ARG 0x54
109#define SD_EMMC_CMD_DAT 0x58
110#define SD_EMMC_CMD_RSP 0x5c
111#define SD_EMMC_CMD_RSP1 0x60
112#define SD_EMMC_CMD_RSP2 0x64
113#define SD_EMMC_CMD_RSP3 0x68
114
115#define SD_EMMC_RXD 0x94
116#define SD_EMMC_TXD 0x94
117#define SD_EMMC_LAST_REG SD_EMMC_TXD
118
119#define SD_EMMC_SRAM_DATA_BUF_LEN 1536
120#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200
121
122#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
123#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
124#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
125#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
126#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
127#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
128
129#define SD_EMMC_PRE_REQ_DONE BIT(0)
130#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
131
132#define MUX_CLK_NUM_PARENTS 2
133
134struct meson_mmc_data {
135 unsigned int tx_delay_mask;
136 unsigned int rx_delay_mask;
137 unsigned int always_on;
138 unsigned int adjust;
139};
140
141struct sd_emmc_desc {
142 u32 cmd_cfg;
143 u32 cmd_arg;
144 u32 cmd_data;
145 u32 cmd_resp;
146};
147
148struct meson_host {
149 struct device *dev;
150 struct meson_mmc_data *data;
151 struct mmc_host *mmc;
152 struct mmc_command *cmd;
153
154 void __iomem *regs;
155 struct clk *core_clk;
156 struct clk *mux_clk;
157 struct clk *mmc_clk;
158 unsigned long req_rate;
159 bool ddr;
160
161 bool dram_access_quirk;
162
163 struct pinctrl *pinctrl;
164 struct pinctrl_state *pins_default;
165 struct pinctrl_state *pins_clk_gate;
166
167 unsigned int bounce_buf_size;
168 void *bounce_buf;
169 dma_addr_t bounce_dma_addr;
170 struct sd_emmc_desc *descs;
171 dma_addr_t descs_dma_addr;
172
173 int irq;
174
175 bool vqmmc_enabled;
176};
177
178#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
179#define CMD_CFG_BLOCK_MODE BIT(9)
180#define CMD_CFG_R1B BIT(10)
181#define CMD_CFG_END_OF_CHAIN BIT(11)
182#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
183#define CMD_CFG_NO_RESP BIT(16)
184#define CMD_CFG_NO_CMD BIT(17)
185#define CMD_CFG_DATA_IO BIT(18)
186#define CMD_CFG_DATA_WR BIT(19)
187#define CMD_CFG_RESP_NOCRC BIT(20)
188#define CMD_CFG_RESP_128 BIT(21)
189#define CMD_CFG_RESP_NUM BIT(22)
190#define CMD_CFG_DATA_NUM BIT(23)
191#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
192#define CMD_CFG_ERROR BIT(30)
193#define CMD_CFG_OWNER BIT(31)
194
195#define CMD_DATA_MASK GENMASK(31, 2)
196#define CMD_DATA_BIG_ENDIAN BIT(1)
197#define CMD_DATA_SRAM BIT(0)
198#define CMD_RESP_MASK GENMASK(31, 1)
199#define CMD_RESP_SRAM BIT(0)
200
201static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
202{
203 unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
204
205 if (!timeout)
206 return SD_EMMC_CMD_TIMEOUT_DATA;
207
208 timeout = roundup_pow_of_two(timeout);
209
210 return min(timeout, 32768U); /* max. 2^15 ms */
211}
212
213static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
214{
215 if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
216 return cmd->mrq->cmd;
217 else if (mmc_op_multi(cmd->opcode) &&
218 (!cmd->mrq->sbc || cmd->error || cmd->data->error))
219 return cmd->mrq->stop;
220 else
221 return NULL;
222}
223
224static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
225 struct mmc_request *mrq)
226{
227 struct meson_host *host = mmc_priv(mmc);
228 struct mmc_data *data = mrq->data;
229 struct scatterlist *sg;
230 int i;
231 bool use_desc_chain_mode = true;
232
233 /*
234 * When Controller DMA cannot directly access DDR memory, disable
235 * support for Chain Mode to directly use the internal SRAM using
236 * the bounce buffer mode.
237 */
238 if (host->dram_access_quirk)
239 return;
240
241 /*
242 * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been
243 * reported. For some strange reason this occurs in descriptor
244 * chain mode only. So let's fall back to bounce buffer mode
245 * for command SD_IO_RW_EXTENDED.
246 */
247 if (mrq->cmd->opcode == SD_IO_RW_EXTENDED)
248 return;
249
250 for_each_sg(data->sg, sg, data->sg_len, i)
251 /* check for 8 byte alignment */
252 if (sg->offset & 7) {
253 WARN_ONCE(1, "unaligned scatterlist buffer\n");
254 use_desc_chain_mode = false;
255 break;
256 }
257
258 if (use_desc_chain_mode)
259 data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
260}
261
262static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
263{
264 return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
265}
266
267static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
268{
269 return data && data->flags & MMC_DATA_READ &&
270 !meson_mmc_desc_chain_mode(data);
271}
272
273static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
274{
275 struct mmc_data *data = mrq->data;
276
277 if (!data)
278 return;
279
280 meson_mmc_get_transfer_mode(mmc, mrq);
281 data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
282
283 if (!meson_mmc_desc_chain_mode(data))
284 return;
285
286 data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
287 mmc_get_dma_dir(data));
288 if (!data->sg_count)
289 dev_err(mmc_dev(mmc), "dma_map_sg failed");
290}
291
292static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
293 int err)
294{
295 struct mmc_data *data = mrq->data;
296
297 if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
298 dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
299 mmc_get_dma_dir(data));
300}
301
302/*
303 * Gating the clock on this controller is tricky. It seems the mmc clock
304 * is also used by the controller. It may crash during some operation if the
305 * clock is stopped. The safest thing to do, whenever possible, is to keep
306 * clock running at stop it at the pad using the pinmux.
307 */
308static void meson_mmc_clk_gate(struct meson_host *host)
309{
310 u32 cfg;
311
312 if (host->pins_clk_gate) {
313 pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
314 } else {
315 /*
316 * If the pinmux is not provided - default to the classic and
317 * unsafe method
318 */
319 cfg = readl(host->regs + SD_EMMC_CFG);
320 cfg |= CFG_STOP_CLOCK;
321 writel(cfg, host->regs + SD_EMMC_CFG);
322 }
323}
324
325static void meson_mmc_clk_ungate(struct meson_host *host)
326{
327 u32 cfg;
328
329 if (host->pins_clk_gate)
330 pinctrl_select_state(host->pinctrl, host->pins_default);
331
332 /* Make sure the clock is not stopped in the controller */
333 cfg = readl(host->regs + SD_EMMC_CFG);
334 cfg &= ~CFG_STOP_CLOCK;
335 writel(cfg, host->regs + SD_EMMC_CFG);
336}
337
338static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate,
339 bool ddr)
340{
341 struct mmc_host *mmc = host->mmc;
342 int ret;
343 u32 cfg;
344
345 /* Same request - bail-out */
346 if (host->ddr == ddr && host->req_rate == rate)
347 return 0;
348
349 /* stop clock */
350 meson_mmc_clk_gate(host);
351 host->req_rate = 0;
352 mmc->actual_clock = 0;
353
354 /* return with clock being stopped */
355 if (!rate)
356 return 0;
357
358 /* Stop the clock during rate change to avoid glitches */
359 cfg = readl(host->regs + SD_EMMC_CFG);
360 cfg |= CFG_STOP_CLOCK;
361 writel(cfg, host->regs + SD_EMMC_CFG);
362
363 if (ddr) {
364 /* DDR modes require higher module clock */
365 rate <<= 1;
366 cfg |= CFG_DDR;
367 } else {
368 cfg &= ~CFG_DDR;
369 }
370 writel(cfg, host->regs + SD_EMMC_CFG);
371 host->ddr = ddr;
372
373 ret = clk_set_rate(host->mmc_clk, rate);
374 if (ret) {
375 dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
376 rate, ret);
377 return ret;
378 }
379
380 host->req_rate = rate;
381 mmc->actual_clock = clk_get_rate(host->mmc_clk);
382
383 /* We should report the real output frequency of the controller */
384 if (ddr) {
385 host->req_rate >>= 1;
386 mmc->actual_clock >>= 1;
387 }
388
389 dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
390 if (rate != mmc->actual_clock)
391 dev_dbg(host->dev, "requested rate was %lu\n", rate);
392
393 /* (re)start clock */
394 meson_mmc_clk_ungate(host);
395
396 return 0;
397}
398
399/*
400 * The SD/eMMC IP block has an internal mux and divider used for
401 * generating the MMC clock. Use the clock framework to create and
402 * manage these clocks.
403 */
404static int meson_mmc_clk_init(struct meson_host *host)
405{
406 struct clk_init_data init;
407 struct clk_mux *mux;
408 struct clk_divider *div;
409 char clk_name[32];
410 int i, ret = 0;
411 const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
412 const char *clk_parent[1];
413 u32 clk_reg;
414
415 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
416 clk_reg = CLK_ALWAYS_ON(host);
417 clk_reg |= CLK_DIV_MASK;
418 clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
419 clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
420 clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
421 writel(clk_reg, host->regs + SD_EMMC_CLOCK);
422
423 /* get the mux parents */
424 for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
425 struct clk *clk;
426 char name[16];
427
428 snprintf(name, sizeof(name), "clkin%d", i);
429 clk = devm_clk_get(host->dev, name);
430 if (IS_ERR(clk)) {
431 if (clk != ERR_PTR(-EPROBE_DEFER))
432 dev_err(host->dev, "Missing clock %s\n", name);
433 return PTR_ERR(clk);
434 }
435
436 mux_parent_names[i] = __clk_get_name(clk);
437 }
438
439 /* create the mux */
440 mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
441 if (!mux)
442 return -ENOMEM;
443
444 snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
445 init.name = clk_name;
446 init.ops = &clk_mux_ops;
447 init.flags = 0;
448 init.parent_names = mux_parent_names;
449 init.num_parents = MUX_CLK_NUM_PARENTS;
450
451 mux->reg = host->regs + SD_EMMC_CLOCK;
452 mux->shift = __ffs(CLK_SRC_MASK);
453 mux->mask = CLK_SRC_MASK >> mux->shift;
454 mux->hw.init = &init;
455
456 host->mux_clk = devm_clk_register(host->dev, &mux->hw);
457 if (WARN_ON(IS_ERR(host->mux_clk)))
458 return PTR_ERR(host->mux_clk);
459
460 /* create the divider */
461 div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
462 if (!div)
463 return -ENOMEM;
464
465 snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
466 init.name = clk_name;
467 init.ops = &clk_divider_ops;
468 init.flags = CLK_SET_RATE_PARENT;
469 clk_parent[0] = __clk_get_name(host->mux_clk);
470 init.parent_names = clk_parent;
471 init.num_parents = 1;
472
473 div->reg = host->regs + SD_EMMC_CLOCK;
474 div->shift = __ffs(CLK_DIV_MASK);
475 div->width = __builtin_popcountl(CLK_DIV_MASK);
476 div->hw.init = &init;
477 div->flags = CLK_DIVIDER_ONE_BASED;
478
479 host->mmc_clk = devm_clk_register(host->dev, &div->hw);
480 if (WARN_ON(IS_ERR(host->mmc_clk)))
481 return PTR_ERR(host->mmc_clk);
482
483 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
484 host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
485 ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
486 if (ret)
487 return ret;
488
489 return clk_prepare_enable(host->mmc_clk);
490}
491
492static void meson_mmc_disable_resampling(struct meson_host *host)
493{
494 unsigned int val = readl(host->regs + host->data->adjust);
495
496 val &= ~ADJUST_ADJ_EN;
497 writel(val, host->regs + host->data->adjust);
498}
499
500static void meson_mmc_reset_resampling(struct meson_host *host)
501{
502 unsigned int val;
503
504 meson_mmc_disable_resampling(host);
505
506 val = readl(host->regs + host->data->adjust);
507 val &= ~ADJUST_ADJ_DELAY_MASK;
508 writel(val, host->regs + host->data->adjust);
509}
510
511static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode)
512{
513 struct meson_host *host = mmc_priv(mmc);
514 unsigned int val, dly, max_dly, i;
515 int ret;
516
517 /* Resampling is done using the source clock */
518 max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk),
519 clk_get_rate(host->mmc_clk));
520
521 val = readl(host->regs + host->data->adjust);
522 val |= ADJUST_ADJ_EN;
523 writel(val, host->regs + host->data->adjust);
524
525 if (mmc->doing_retune)
526 dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1;
527 else
528 dly = 0;
529
530 for (i = 0; i < max_dly; i++) {
531 val &= ~ADJUST_ADJ_DELAY_MASK;
532 val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly);
533 writel(val, host->regs + host->data->adjust);
534
535 ret = mmc_send_tuning(mmc, opcode, NULL);
536 if (!ret) {
537 dev_dbg(mmc_dev(mmc), "resampling delay: %u\n",
538 (dly + i) % max_dly);
539 return 0;
540 }
541 }
542
543 meson_mmc_reset_resampling(host);
544 return -EIO;
545}
546
547static int meson_mmc_prepare_ios_clock(struct meson_host *host,
548 struct mmc_ios *ios)
549{
550 bool ddr;
551
552 switch (ios->timing) {
553 case MMC_TIMING_MMC_DDR52:
554 case MMC_TIMING_UHS_DDR50:
555 ddr = true;
556 break;
557
558 default:
559 ddr = false;
560 break;
561 }
562
563 return meson_mmc_clk_set(host, ios->clock, ddr);
564}
565
566static void meson_mmc_check_resampling(struct meson_host *host,
567 struct mmc_ios *ios)
568{
569 switch (ios->timing) {
570 case MMC_TIMING_LEGACY:
571 case MMC_TIMING_MMC_HS:
572 case MMC_TIMING_SD_HS:
573 case MMC_TIMING_MMC_DDR52:
574 meson_mmc_disable_resampling(host);
575 break;
576 }
577}
578
579static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
580{
581 struct meson_host *host = mmc_priv(mmc);
582 u32 bus_width, val;
583 int err;
584
585 /*
586 * GPIO regulator, only controls switching between 1v8 and
587 * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
588 */
589 switch (ios->power_mode) {
590 case MMC_POWER_OFF:
591 if (!IS_ERR(mmc->supply.vmmc))
592 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
593
594 if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
595 regulator_disable(mmc->supply.vqmmc);
596 host->vqmmc_enabled = false;
597 }
598
599 break;
600
601 case MMC_POWER_UP:
602 if (!IS_ERR(mmc->supply.vmmc))
603 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
604
605 break;
606
607 case MMC_POWER_ON:
608 if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
609 int ret = regulator_enable(mmc->supply.vqmmc);
610
611 if (ret < 0)
612 dev_err(host->dev,
613 "failed to enable vqmmc regulator\n");
614 else
615 host->vqmmc_enabled = true;
616 }
617
618 break;
619 }
620
621 /* Bus width */
622 switch (ios->bus_width) {
623 case MMC_BUS_WIDTH_1:
624 bus_width = CFG_BUS_WIDTH_1;
625 break;
626 case MMC_BUS_WIDTH_4:
627 bus_width = CFG_BUS_WIDTH_4;
628 break;
629 case MMC_BUS_WIDTH_8:
630 bus_width = CFG_BUS_WIDTH_8;
631 break;
632 default:
633 dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
634 ios->bus_width);
635 bus_width = CFG_BUS_WIDTH_4;
636 }
637
638 val = readl(host->regs + SD_EMMC_CFG);
639 val &= ~CFG_BUS_WIDTH_MASK;
640 val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
641 writel(val, host->regs + SD_EMMC_CFG);
642
643 meson_mmc_check_resampling(host, ios);
644 err = meson_mmc_prepare_ios_clock(host, ios);
645 if (err)
646 dev_err(host->dev, "Failed to set clock: %d\n,", err);
647
648 dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val);
649}
650
651static void meson_mmc_request_done(struct mmc_host *mmc,
652 struct mmc_request *mrq)
653{
654 struct meson_host *host = mmc_priv(mmc);
655
656 host->cmd = NULL;
657 mmc_request_done(host->mmc, mrq);
658}
659
660static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
661{
662 struct meson_host *host = mmc_priv(mmc);
663 u32 cfg, blksz_old;
664
665 cfg = readl(host->regs + SD_EMMC_CFG);
666 blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
667
668 if (!is_power_of_2(blksz))
669 dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
670
671 blksz = ilog2(blksz);
672
673 /* check if block-size matches, if not update */
674 if (blksz == blksz_old)
675 return;
676
677 dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
678 blksz_old, blksz);
679
680 cfg &= ~CFG_BLK_LEN_MASK;
681 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
682 writel(cfg, host->regs + SD_EMMC_CFG);
683}
684
685static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
686{
687 if (cmd->flags & MMC_RSP_PRESENT) {
688 if (cmd->flags & MMC_RSP_136)
689 *cmd_cfg |= CMD_CFG_RESP_128;
690 *cmd_cfg |= CMD_CFG_RESP_NUM;
691
692 if (!(cmd->flags & MMC_RSP_CRC))
693 *cmd_cfg |= CMD_CFG_RESP_NOCRC;
694
695 if (cmd->flags & MMC_RSP_BUSY)
696 *cmd_cfg |= CMD_CFG_R1B;
697 } else {
698 *cmd_cfg |= CMD_CFG_NO_RESP;
699 }
700}
701
702static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
703{
704 struct meson_host *host = mmc_priv(mmc);
705 struct sd_emmc_desc *desc = host->descs;
706 struct mmc_data *data = host->cmd->data;
707 struct scatterlist *sg;
708 u32 start;
709 int i;
710
711 if (data->flags & MMC_DATA_WRITE)
712 cmd_cfg |= CMD_CFG_DATA_WR;
713
714 if (data->blocks > 1) {
715 cmd_cfg |= CMD_CFG_BLOCK_MODE;
716 meson_mmc_set_blksz(mmc, data->blksz);
717 }
718
719 for_each_sg(data->sg, sg, data->sg_count, i) {
720 unsigned int len = sg_dma_len(sg);
721
722 if (data->blocks > 1)
723 len /= data->blksz;
724
725 desc[i].cmd_cfg = cmd_cfg;
726 desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
727 if (i > 0)
728 desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
729 desc[i].cmd_arg = host->cmd->arg;
730 desc[i].cmd_resp = 0;
731 desc[i].cmd_data = sg_dma_address(sg);
732 }
733 desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
734
735 dma_wmb(); /* ensure descriptor is written before kicked */
736 start = host->descs_dma_addr | START_DESC_BUSY;
737 writel(start, host->regs + SD_EMMC_START);
738}
739
740static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
741{
742 struct meson_host *host = mmc_priv(mmc);
743 struct mmc_data *data = cmd->data;
744 u32 cmd_cfg = 0, cmd_data = 0;
745 unsigned int xfer_bytes = 0;
746
747 /* Setup descriptors */
748 dma_rmb();
749
750 host->cmd = cmd;
751
752 cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
753 cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
754 cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
755
756 meson_mmc_set_response_bits(cmd, &cmd_cfg);
757
758 /* data? */
759 if (data) {
760 data->bytes_xfered = 0;
761 cmd_cfg |= CMD_CFG_DATA_IO;
762 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
763 ilog2(meson_mmc_get_timeout_msecs(data)));
764
765 if (meson_mmc_desc_chain_mode(data)) {
766 meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
767 return;
768 }
769
770 if (data->blocks > 1) {
771 cmd_cfg |= CMD_CFG_BLOCK_MODE;
772 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
773 data->blocks);
774 meson_mmc_set_blksz(mmc, data->blksz);
775 } else {
776 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
777 }
778
779 xfer_bytes = data->blksz * data->blocks;
780 if (data->flags & MMC_DATA_WRITE) {
781 cmd_cfg |= CMD_CFG_DATA_WR;
782 WARN_ON(xfer_bytes > host->bounce_buf_size);
783 sg_copy_to_buffer(data->sg, data->sg_len,
784 host->bounce_buf, xfer_bytes);
785 dma_wmb();
786 }
787
788 cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
789 } else {
790 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
791 ilog2(SD_EMMC_CMD_TIMEOUT));
792 }
793
794 /* Last descriptor */
795 cmd_cfg |= CMD_CFG_END_OF_CHAIN;
796 writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
797 writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
798 writel(0, host->regs + SD_EMMC_CMD_RSP);
799 wmb(); /* ensure descriptor is written before kicked */
800 writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
801}
802
803static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
804{
805 struct meson_host *host = mmc_priv(mmc);
806 bool needs_pre_post_req = mrq->data &&
807 !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
808
809 if (needs_pre_post_req) {
810 meson_mmc_get_transfer_mode(mmc, mrq);
811 if (!meson_mmc_desc_chain_mode(mrq->data))
812 needs_pre_post_req = false;
813 }
814
815 if (needs_pre_post_req)
816 meson_mmc_pre_req(mmc, mrq);
817
818 /* Stop execution */
819 writel(0, host->regs + SD_EMMC_START);
820
821 meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
822
823 if (needs_pre_post_req)
824 meson_mmc_post_req(mmc, mrq, 0);
825}
826
827static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
828{
829 struct meson_host *host = mmc_priv(mmc);
830
831 if (cmd->flags & MMC_RSP_136) {
832 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
833 cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
834 cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
835 cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
836 } else if (cmd->flags & MMC_RSP_PRESENT) {
837 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
838 }
839}
840
841static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
842{
843 struct meson_host *host = dev_id;
844 struct mmc_command *cmd;
845 struct mmc_data *data;
846 u32 irq_en, status, raw_status;
847 irqreturn_t ret = IRQ_NONE;
848
849 irq_en = readl(host->regs + SD_EMMC_IRQ_EN);
850 raw_status = readl(host->regs + SD_EMMC_STATUS);
851 status = raw_status & irq_en;
852
853 if (!status) {
854 dev_dbg(host->dev,
855 "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
856 irq_en, raw_status);
857 return IRQ_NONE;
858 }
859
860 if (WARN_ON(!host) || WARN_ON(!host->cmd))
861 return IRQ_NONE;
862
863 /* ack all raised interrupts */
864 writel(status, host->regs + SD_EMMC_STATUS);
865
866 cmd = host->cmd;
867 data = cmd->data;
868 cmd->error = 0;
869 if (status & IRQ_CRC_ERR) {
870 dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
871 cmd->error = -EILSEQ;
872 ret = IRQ_WAKE_THREAD;
873 goto out;
874 }
875
876 if (status & IRQ_TIMEOUTS) {
877 dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
878 cmd->error = -ETIMEDOUT;
879 ret = IRQ_WAKE_THREAD;
880 goto out;
881 }
882
883 meson_mmc_read_resp(host->mmc, cmd);
884
885 if (status & IRQ_SDIO) {
886 dev_dbg(host->dev, "IRQ: SDIO TODO.\n");
887 ret = IRQ_HANDLED;
888 }
889
890 if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
891 if (data && !cmd->error)
892 data->bytes_xfered = data->blksz * data->blocks;
893 if (meson_mmc_bounce_buf_read(data) ||
894 meson_mmc_get_next_command(cmd))
895 ret = IRQ_WAKE_THREAD;
896 else
897 ret = IRQ_HANDLED;
898 }
899
900out:
901 if (cmd->error) {
902 /* Stop desc in case of errors */
903 u32 start = readl(host->regs + SD_EMMC_START);
904
905 start &= ~START_DESC_BUSY;
906 writel(start, host->regs + SD_EMMC_START);
907 }
908
909 if (ret == IRQ_HANDLED)
910 meson_mmc_request_done(host->mmc, cmd->mrq);
911
912 return ret;
913}
914
915static int meson_mmc_wait_desc_stop(struct meson_host *host)
916{
917 u32 status;
918
919 /*
920 * It may sometimes take a while for it to actually halt. Here, we
921 * are giving it 5ms to comply
922 *
923 * If we don't confirm the descriptor is stopped, it might raise new
924 * IRQs after we have called mmc_request_done() which is bad.
925 */
926
927 return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status,
928 !(status & (STATUS_BUSY | STATUS_DESC_BUSY)),
929 100, 5000);
930}
931
932static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
933{
934 struct meson_host *host = dev_id;
935 struct mmc_command *next_cmd, *cmd = host->cmd;
936 struct mmc_data *data;
937 unsigned int xfer_bytes;
938
939 if (WARN_ON(!cmd))
940 return IRQ_NONE;
941
942 if (cmd->error) {
943 meson_mmc_wait_desc_stop(host);
944 meson_mmc_request_done(host->mmc, cmd->mrq);
945
946 return IRQ_HANDLED;
947 }
948
949 data = cmd->data;
950 if (meson_mmc_bounce_buf_read(data)) {
951 xfer_bytes = data->blksz * data->blocks;
952 WARN_ON(xfer_bytes > host->bounce_buf_size);
953 sg_copy_from_buffer(data->sg, data->sg_len,
954 host->bounce_buf, xfer_bytes);
955 }
956
957 next_cmd = meson_mmc_get_next_command(cmd);
958 if (next_cmd)
959 meson_mmc_start_cmd(host->mmc, next_cmd);
960 else
961 meson_mmc_request_done(host->mmc, cmd->mrq);
962
963 return IRQ_HANDLED;
964}
965
966/*
967 * NOTE: we only need this until the GPIO/pinctrl driver can handle
968 * interrupts. For now, the MMC core will use this for polling.
969 */
970static int meson_mmc_get_cd(struct mmc_host *mmc)
971{
972 int status = mmc_gpio_get_cd(mmc);
973
974 if (status == -ENOSYS)
975 return 1; /* assume present */
976
977 return status;
978}
979
980static void meson_mmc_cfg_init(struct meson_host *host)
981{
982 u32 cfg = 0;
983
984 cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
985 ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
986 cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
987 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
988
989 /* abort chain on R/W errors */
990 cfg |= CFG_ERR_ABORT;
991
992 writel(cfg, host->regs + SD_EMMC_CFG);
993}
994
995static int meson_mmc_card_busy(struct mmc_host *mmc)
996{
997 struct meson_host *host = mmc_priv(mmc);
998 u32 regval;
999
1000 regval = readl(host->regs + SD_EMMC_STATUS);
1001
1002 /* We are only interrested in lines 0 to 3, so mask the other ones */
1003 return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
1004}
1005
1006static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
1007{
1008 /* vqmmc regulator is available */
1009 if (!IS_ERR(mmc->supply.vqmmc)) {
1010 /*
1011 * The usual amlogic setup uses a GPIO to switch from one
1012 * regulator to the other. While the voltage ramp up is
1013 * pretty fast, care must be taken when switching from 3.3v
1014 * to 1.8v. Please make sure the regulator framework is aware
1015 * of your own regulator constraints
1016 */
1017 return mmc_regulator_set_vqmmc(mmc, ios);
1018 }
1019
1020 /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
1021 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
1022 return 0;
1023
1024 return -EINVAL;
1025}
1026
1027static const struct mmc_host_ops meson_mmc_ops = {
1028 .request = meson_mmc_request,
1029 .set_ios = meson_mmc_set_ios,
1030 .get_cd = meson_mmc_get_cd,
1031 .pre_req = meson_mmc_pre_req,
1032 .post_req = meson_mmc_post_req,
1033 .execute_tuning = meson_mmc_resampling_tuning,
1034 .card_busy = meson_mmc_card_busy,
1035 .start_signal_voltage_switch = meson_mmc_voltage_switch,
1036};
1037
1038static int meson_mmc_probe(struct platform_device *pdev)
1039{
1040 struct resource *res;
1041 struct meson_host *host;
1042 struct mmc_host *mmc;
1043 int ret;
1044
1045 mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
1046 if (!mmc)
1047 return -ENOMEM;
1048 host = mmc_priv(mmc);
1049 host->mmc = mmc;
1050 host->dev = &pdev->dev;
1051 dev_set_drvdata(&pdev->dev, host);
1052
1053 /* The G12A SDIO Controller needs an SRAM bounce buffer */
1054 host->dram_access_quirk = device_property_read_bool(&pdev->dev,
1055 "amlogic,dram-access-quirk");
1056
1057 /* Get regulators and the supported OCR mask */
1058 host->vqmmc_enabled = false;
1059 ret = mmc_regulator_get_supply(mmc);
1060 if (ret)
1061 goto free_host;
1062
1063 ret = mmc_of_parse(mmc);
1064 if (ret) {
1065 if (ret != -EPROBE_DEFER)
1066 dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
1067 goto free_host;
1068 }
1069
1070 host->data = (struct meson_mmc_data *)
1071 of_device_get_match_data(&pdev->dev);
1072 if (!host->data) {
1073 ret = -EINVAL;
1074 goto free_host;
1075 }
1076
1077 ret = device_reset_optional(&pdev->dev);
1078 if (ret) {
1079 if (ret != -EPROBE_DEFER)
1080 dev_err(&pdev->dev, "device reset failed: %d\n", ret);
1081
1082 return ret;
1083 }
1084
1085 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1086 host->regs = devm_ioremap_resource(&pdev->dev, res);
1087 if (IS_ERR(host->regs)) {
1088 ret = PTR_ERR(host->regs);
1089 goto free_host;
1090 }
1091
1092 host->irq = platform_get_irq(pdev, 0);
1093 if (host->irq <= 0) {
1094 ret = -EINVAL;
1095 goto free_host;
1096 }
1097
1098 host->pinctrl = devm_pinctrl_get(&pdev->dev);
1099 if (IS_ERR(host->pinctrl)) {
1100 ret = PTR_ERR(host->pinctrl);
1101 goto free_host;
1102 }
1103
1104 host->pins_default = pinctrl_lookup_state(host->pinctrl,
1105 PINCTRL_STATE_DEFAULT);
1106 if (IS_ERR(host->pins_default)) {
1107 ret = PTR_ERR(host->pins_default);
1108 goto free_host;
1109 }
1110
1111 host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
1112 "clk-gate");
1113 if (IS_ERR(host->pins_clk_gate)) {
1114 dev_warn(&pdev->dev,
1115 "can't get clk-gate pinctrl, using clk_stop bit\n");
1116 host->pins_clk_gate = NULL;
1117 }
1118
1119 host->core_clk = devm_clk_get(&pdev->dev, "core");
1120 if (IS_ERR(host->core_clk)) {
1121 ret = PTR_ERR(host->core_clk);
1122 goto free_host;
1123 }
1124
1125 ret = clk_prepare_enable(host->core_clk);
1126 if (ret)
1127 goto free_host;
1128
1129 ret = meson_mmc_clk_init(host);
1130 if (ret)
1131 goto err_core_clk;
1132
1133 /* set config to sane default */
1134 meson_mmc_cfg_init(host);
1135
1136 /* Stop execution */
1137 writel(0, host->regs + SD_EMMC_START);
1138
1139 /* clear, ack and enable interrupts */
1140 writel(0, host->regs + SD_EMMC_IRQ_EN);
1141 writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
1142 host->regs + SD_EMMC_STATUS);
1143 writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN,
1144 host->regs + SD_EMMC_IRQ_EN);
1145
1146 ret = request_threaded_irq(host->irq, meson_mmc_irq,
1147 meson_mmc_irq_thread, IRQF_ONESHOT,
1148 dev_name(&pdev->dev), host);
1149 if (ret)
1150 goto err_init_clk;
1151
1152 mmc->caps |= MMC_CAP_CMD23;
1153 if (host->dram_access_quirk) {
1154 /* Limit to the available sram memory */
1155 mmc->max_segs = SD_EMMC_SRAM_DATA_BUF_LEN / mmc->max_blk_size;
1156 mmc->max_blk_count = mmc->max_segs;
1157 } else {
1158 mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
1159 mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
1160 sizeof(struct sd_emmc_desc);
1161 }
1162 mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
1163 mmc->max_seg_size = mmc->max_req_size;
1164
1165 /*
1166 * At the moment, we don't know how to reliably enable HS400.
1167 * From the different datasheets, it is not even clear if this mode
1168 * is officially supported by any of the SoCs
1169 */
1170 mmc->caps2 &= ~MMC_CAP2_HS400;
1171
1172 if (host->dram_access_quirk) {
1173 /*
1174 * The MMC Controller embeds 1,5KiB of internal SRAM
1175 * that can be used to be used as bounce buffer.
1176 * In the case of the G12A SDIO controller, use these
1177 * instead of the DDR memory
1178 */
1179 host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
1180 host->bounce_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
1181 host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
1182 } else {
1183 /* data bounce buffer */
1184 host->bounce_buf_size = mmc->max_req_size;
1185 host->bounce_buf =
1186 dma_alloc_coherent(host->dev, host->bounce_buf_size,
1187 &host->bounce_dma_addr, GFP_KERNEL);
1188 if (host->bounce_buf == NULL) {
1189 dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
1190 ret = -ENOMEM;
1191 goto err_free_irq;
1192 }
1193 }
1194
1195 host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1196 &host->descs_dma_addr, GFP_KERNEL);
1197 if (!host->descs) {
1198 dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
1199 ret = -ENOMEM;
1200 goto err_bounce_buf;
1201 }
1202
1203 mmc->ops = &meson_mmc_ops;
1204 mmc_add_host(mmc);
1205
1206 return 0;
1207
1208err_bounce_buf:
1209 if (!host->dram_access_quirk)
1210 dma_free_coherent(host->dev, host->bounce_buf_size,
1211 host->bounce_buf, host->bounce_dma_addr);
1212err_free_irq:
1213 free_irq(host->irq, host);
1214err_init_clk:
1215 clk_disable_unprepare(host->mmc_clk);
1216err_core_clk:
1217 clk_disable_unprepare(host->core_clk);
1218free_host:
1219 mmc_free_host(mmc);
1220 return ret;
1221}
1222
1223static int meson_mmc_remove(struct platform_device *pdev)
1224{
1225 struct meson_host *host = dev_get_drvdata(&pdev->dev);
1226
1227 mmc_remove_host(host->mmc);
1228
1229 /* disable interrupts */
1230 writel(0, host->regs + SD_EMMC_IRQ_EN);
1231 free_irq(host->irq, host);
1232
1233 dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
1234 host->descs, host->descs_dma_addr);
1235
1236 if (!host->dram_access_quirk)
1237 dma_free_coherent(host->dev, host->bounce_buf_size,
1238 host->bounce_buf, host->bounce_dma_addr);
1239
1240 clk_disable_unprepare(host->mmc_clk);
1241 clk_disable_unprepare(host->core_clk);
1242
1243 mmc_free_host(host->mmc);
1244 return 0;
1245}
1246
1247static const struct meson_mmc_data meson_gx_data = {
1248 .tx_delay_mask = CLK_V2_TX_DELAY_MASK,
1249 .rx_delay_mask = CLK_V2_RX_DELAY_MASK,
1250 .always_on = CLK_V2_ALWAYS_ON,
1251 .adjust = SD_EMMC_ADJUST,
1252};
1253
1254static const struct meson_mmc_data meson_axg_data = {
1255 .tx_delay_mask = CLK_V3_TX_DELAY_MASK,
1256 .rx_delay_mask = CLK_V3_RX_DELAY_MASK,
1257 .always_on = CLK_V3_ALWAYS_ON,
1258 .adjust = SD_EMMC_V3_ADJUST,
1259};
1260
1261static const struct of_device_id meson_mmc_of_match[] = {
1262 { .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data },
1263 { .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data },
1264 { .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data },
1265 { .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data },
1266 { .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data },
1267 {}
1268};
1269MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
1270
1271static struct platform_driver meson_mmc_driver = {
1272 .probe = meson_mmc_probe,
1273 .remove = meson_mmc_remove,
1274 .driver = {
1275 .name = DRIVER_NAME,
1276 .of_match_table = of_match_ptr(meson_mmc_of_match),
1277 },
1278};
1279
1280module_platform_driver(meson_mmc_driver);
1281
1282MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver");
1283MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
1284MODULE_LICENSE("GPL v2");