Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Toradex Colibri VF50 Touchscreen driver
4 *
5 * Copyright 2015 Toradex AG
6 *
7 * Originally authored by Stefan Agner for 3.0 kernel
8 */
9
10#include <linux/delay.h>
11#include <linux/err.h>
12#include <linux/gpio/consumer.h>
13#include <linux/iio/consumer.h>
14#include <linux/iio/types.h>
15#include <linux/input.h>
16#include <linux/interrupt.h>
17#include <linux/kernel.h>
18#include <linux/module.h>
19#include <linux/of.h>
20#include <linux/pinctrl/consumer.h>
21#include <linux/platform_device.h>
22#include <linux/slab.h>
23#include <linux/types.h>
24
25#define DRIVER_NAME "colibri-vf50-ts"
26
27#define VF_ADC_MAX ((1 << 12) - 1)
28
29#define COLI_TOUCH_MIN_DELAY_US 1000
30#define COLI_TOUCH_MAX_DELAY_US 2000
31#define COLI_PULLUP_MIN_DELAY_US 10000
32#define COLI_PULLUP_MAX_DELAY_US 11000
33#define COLI_TOUCH_NO_OF_AVGS 5
34#define COLI_TOUCH_REQ_ADC_CHAN 4
35
36struct vf50_touch_device {
37 struct platform_device *pdev;
38 struct input_dev *ts_input;
39 struct iio_channel *channels;
40 struct gpio_desc *gpio_xp;
41 struct gpio_desc *gpio_xm;
42 struct gpio_desc *gpio_yp;
43 struct gpio_desc *gpio_ym;
44 int pen_irq;
45 int min_pressure;
46 bool stop_touchscreen;
47};
48
49/*
50 * Enables given plates and measures touch parameters using ADC
51 */
52static int adc_ts_measure(struct iio_channel *channel,
53 struct gpio_desc *plate_p, struct gpio_desc *plate_m)
54{
55 int i, value = 0, val = 0;
56 int error;
57
58 gpiod_set_value(plate_p, 1);
59 gpiod_set_value(plate_m, 1);
60
61 usleep_range(COLI_TOUCH_MIN_DELAY_US, COLI_TOUCH_MAX_DELAY_US);
62
63 for (i = 0; i < COLI_TOUCH_NO_OF_AVGS; i++) {
64 error = iio_read_channel_raw(channel, &val);
65 if (error < 0) {
66 value = error;
67 goto error_iio_read;
68 }
69
70 value += val;
71 }
72
73 value /= COLI_TOUCH_NO_OF_AVGS;
74
75error_iio_read:
76 gpiod_set_value(plate_p, 0);
77 gpiod_set_value(plate_m, 0);
78
79 return value;
80}
81
82/*
83 * Enable touch detection using falling edge detection on XM
84 */
85static void vf50_ts_enable_touch_detection(struct vf50_touch_device *vf50_ts)
86{
87 /* Enable plate YM (needs to be strong GND, high active) */
88 gpiod_set_value(vf50_ts->gpio_ym, 1);
89
90 /*
91 * Let the platform mux to idle state in order to enable
92 * Pull-Up on GPIO
93 */
94 pinctrl_pm_select_idle_state(&vf50_ts->pdev->dev);
95
96 /* Wait for the pull-up to be stable on high */
97 usleep_range(COLI_PULLUP_MIN_DELAY_US, COLI_PULLUP_MAX_DELAY_US);
98}
99
100/*
101 * ADC touch screen sampling bottom half irq handler
102 */
103static irqreturn_t vf50_ts_irq_bh(int irq, void *private)
104{
105 struct vf50_touch_device *vf50_ts = private;
106 struct device *dev = &vf50_ts->pdev->dev;
107 int val_x, val_y, val_z1, val_z2, val_p = 0;
108 bool discard_val_on_start = true;
109
110 /* Disable the touch detection plates */
111 gpiod_set_value(vf50_ts->gpio_ym, 0);
112
113 /* Let the platform mux to default state in order to mux as ADC */
114 pinctrl_pm_select_default_state(dev);
115
116 while (!vf50_ts->stop_touchscreen) {
117 /* X-Direction */
118 val_x = adc_ts_measure(&vf50_ts->channels[0],
119 vf50_ts->gpio_xp, vf50_ts->gpio_xm);
120 if (val_x < 0)
121 break;
122
123 /* Y-Direction */
124 val_y = adc_ts_measure(&vf50_ts->channels[1],
125 vf50_ts->gpio_yp, vf50_ts->gpio_ym);
126 if (val_y < 0)
127 break;
128
129 /*
130 * Touch pressure
131 * Measure on XP/YM
132 */
133 val_z1 = adc_ts_measure(&vf50_ts->channels[2],
134 vf50_ts->gpio_yp, vf50_ts->gpio_xm);
135 if (val_z1 < 0)
136 break;
137 val_z2 = adc_ts_measure(&vf50_ts->channels[3],
138 vf50_ts->gpio_yp, vf50_ts->gpio_xm);
139 if (val_z2 < 0)
140 break;
141
142 /* Validate signal (avoid calculation using noise) */
143 if (val_z1 > 64 && val_x > 64) {
144 /*
145 * Calculate resistance between the plates
146 * lower resistance means higher pressure
147 */
148 int r_x = (1000 * val_x) / VF_ADC_MAX;
149
150 val_p = (r_x * val_z2) / val_z1 - r_x;
151
152 } else {
153 val_p = 2000;
154 }
155
156 val_p = 2000 - val_p;
157 dev_dbg(dev,
158 "Measured values: x: %d, y: %d, z1: %d, z2: %d, p: %d\n",
159 val_x, val_y, val_z1, val_z2, val_p);
160
161 /*
162 * If touch pressure is too low, stop measuring and reenable
163 * touch detection
164 */
165 if (val_p < vf50_ts->min_pressure || val_p > 2000)
166 break;
167
168 /*
169 * The pressure may not be enough for the first x and the
170 * second y measurement, but, the pressure is ok when the
171 * driver is doing the third and fourth measurement. To
172 * take care of this, we drop the first measurement always.
173 */
174 if (discard_val_on_start) {
175 discard_val_on_start = false;
176 } else {
177 /*
178 * Report touch position and sleep for
179 * the next measurement.
180 */
181 input_report_abs(vf50_ts->ts_input,
182 ABS_X, VF_ADC_MAX - val_x);
183 input_report_abs(vf50_ts->ts_input,
184 ABS_Y, VF_ADC_MAX - val_y);
185 input_report_abs(vf50_ts->ts_input,
186 ABS_PRESSURE, val_p);
187 input_report_key(vf50_ts->ts_input, BTN_TOUCH, 1);
188 input_sync(vf50_ts->ts_input);
189 }
190
191 usleep_range(COLI_PULLUP_MIN_DELAY_US,
192 COLI_PULLUP_MAX_DELAY_US);
193 }
194
195 /* Report no more touch, re-enable touch detection */
196 input_report_abs(vf50_ts->ts_input, ABS_PRESSURE, 0);
197 input_report_key(vf50_ts->ts_input, BTN_TOUCH, 0);
198 input_sync(vf50_ts->ts_input);
199
200 vf50_ts_enable_touch_detection(vf50_ts);
201
202 return IRQ_HANDLED;
203}
204
205static int vf50_ts_open(struct input_dev *dev_input)
206{
207 struct vf50_touch_device *touchdev = input_get_drvdata(dev_input);
208 struct device *dev = &touchdev->pdev->dev;
209
210 dev_dbg(dev, "Input device %s opened, starting touch detection\n",
211 dev_input->name);
212
213 touchdev->stop_touchscreen = false;
214
215 /* Mux detection before request IRQ, wait for pull-up to settle */
216 vf50_ts_enable_touch_detection(touchdev);
217
218 return 0;
219}
220
221static void vf50_ts_close(struct input_dev *dev_input)
222{
223 struct vf50_touch_device *touchdev = input_get_drvdata(dev_input);
224 struct device *dev = &touchdev->pdev->dev;
225
226 touchdev->stop_touchscreen = true;
227
228 /* Make sure IRQ is not running past close */
229 mb();
230 synchronize_irq(touchdev->pen_irq);
231
232 gpiod_set_value(touchdev->gpio_ym, 0);
233 pinctrl_pm_select_default_state(dev);
234
235 dev_dbg(dev, "Input device %s closed, disable touch detection\n",
236 dev_input->name);
237}
238
239static int vf50_ts_get_gpiod(struct device *dev, struct gpio_desc **gpio_d,
240 const char *con_id, enum gpiod_flags flags)
241{
242 int error;
243
244 *gpio_d = devm_gpiod_get(dev, con_id, flags);
245 if (IS_ERR(*gpio_d)) {
246 error = PTR_ERR(*gpio_d);
247 dev_err(dev, "Could not get gpio_%s %d\n", con_id, error);
248 return error;
249 }
250
251 return 0;
252}
253
254static void vf50_ts_channel_release(void *data)
255{
256 struct iio_channel *channels = data;
257
258 iio_channel_release_all(channels);
259}
260
261static int vf50_ts_probe(struct platform_device *pdev)
262{
263 struct input_dev *input;
264 struct iio_channel *channels;
265 struct device *dev = &pdev->dev;
266 struct vf50_touch_device *touchdev;
267 int num_adc_channels;
268 int error;
269
270 channels = iio_channel_get_all(dev);
271 if (IS_ERR(channels))
272 return PTR_ERR(channels);
273
274 error = devm_add_action(dev, vf50_ts_channel_release, channels);
275 if (error) {
276 iio_channel_release_all(channels);
277 dev_err(dev, "Failed to register iio channel release action");
278 return error;
279 }
280
281 num_adc_channels = 0;
282 while (channels[num_adc_channels].indio_dev)
283 num_adc_channels++;
284
285 if (num_adc_channels != COLI_TOUCH_REQ_ADC_CHAN) {
286 dev_err(dev, "Inadequate ADC channels specified\n");
287 return -EINVAL;
288 }
289
290 touchdev = devm_kzalloc(dev, sizeof(*touchdev), GFP_KERNEL);
291 if (!touchdev)
292 return -ENOMEM;
293
294 touchdev->pdev = pdev;
295 touchdev->channels = channels;
296
297 error = of_property_read_u32(dev->of_node, "vf50-ts-min-pressure",
298 &touchdev->min_pressure);
299 if (error)
300 return error;
301
302 input = devm_input_allocate_device(dev);
303 if (!input) {
304 dev_err(dev, "Failed to allocate TS input device\n");
305 return -ENOMEM;
306 }
307
308 input->name = DRIVER_NAME;
309 input->id.bustype = BUS_HOST;
310 input->dev.parent = dev;
311 input->open = vf50_ts_open;
312 input->close = vf50_ts_close;
313
314 input_set_capability(input, EV_KEY, BTN_TOUCH);
315 input_set_abs_params(input, ABS_X, 0, VF_ADC_MAX, 0, 0);
316 input_set_abs_params(input, ABS_Y, 0, VF_ADC_MAX, 0, 0);
317 input_set_abs_params(input, ABS_PRESSURE, 0, VF_ADC_MAX, 0, 0);
318
319 touchdev->ts_input = input;
320 input_set_drvdata(input, touchdev);
321
322 error = input_register_device(input);
323 if (error) {
324 dev_err(dev, "Failed to register input device\n");
325 return error;
326 }
327
328 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xp, "xp", GPIOD_OUT_LOW);
329 if (error)
330 return error;
331
332 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xm,
333 "xm", GPIOD_OUT_LOW);
334 if (error)
335 return error;
336
337 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_yp, "yp", GPIOD_OUT_LOW);
338 if (error)
339 return error;
340
341 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_ym, "ym", GPIOD_OUT_LOW);
342 if (error)
343 return error;
344
345 touchdev->pen_irq = platform_get_irq(pdev, 0);
346 if (touchdev->pen_irq < 0)
347 return touchdev->pen_irq;
348
349 error = devm_request_threaded_irq(dev, touchdev->pen_irq,
350 NULL, vf50_ts_irq_bh, IRQF_ONESHOT,
351 "vf50 touch", touchdev);
352 if (error) {
353 dev_err(dev, "Failed to request IRQ %d: %d\n",
354 touchdev->pen_irq, error);
355 return error;
356 }
357
358 return 0;
359}
360
361static const struct of_device_id vf50_touch_of_match[] = {
362 { .compatible = "toradex,vf50-touchscreen", },
363 { }
364};
365MODULE_DEVICE_TABLE(of, vf50_touch_of_match);
366
367static struct platform_driver vf50_touch_driver = {
368 .driver = {
369 .name = "toradex,vf50_touchctrl",
370 .of_match_table = vf50_touch_of_match,
371 },
372 .probe = vf50_ts_probe,
373};
374module_platform_driver(vf50_touch_driver);
375
376MODULE_AUTHOR("Sanchayan Maity");
377MODULE_DESCRIPTION("Colibri VF50 Touchscreen driver");
378MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Toradex Colibri VF50 Touchscreen driver
4 *
5 * Copyright 2015 Toradex AG
6 *
7 * Originally authored by Stefan Agner for 3.0 kernel
8 */
9
10#include <linux/delay.h>
11#include <linux/err.h>
12#include <linux/gpio.h>
13#include <linux/gpio/consumer.h>
14#include <linux/iio/consumer.h>
15#include <linux/iio/types.h>
16#include <linux/input.h>
17#include <linux/interrupt.h>
18#include <linux/kernel.h>
19#include <linux/module.h>
20#include <linux/of.h>
21#include <linux/pinctrl/consumer.h>
22#include <linux/platform_device.h>
23#include <linux/slab.h>
24#include <linux/types.h>
25
26#define DRIVER_NAME "colibri-vf50-ts"
27
28#define VF_ADC_MAX ((1 << 12) - 1)
29
30#define COLI_TOUCH_MIN_DELAY_US 1000
31#define COLI_TOUCH_MAX_DELAY_US 2000
32#define COLI_PULLUP_MIN_DELAY_US 10000
33#define COLI_PULLUP_MAX_DELAY_US 11000
34#define COLI_TOUCH_NO_OF_AVGS 5
35#define COLI_TOUCH_REQ_ADC_CHAN 4
36
37struct vf50_touch_device {
38 struct platform_device *pdev;
39 struct input_dev *ts_input;
40 struct iio_channel *channels;
41 struct gpio_desc *gpio_xp;
42 struct gpio_desc *gpio_xm;
43 struct gpio_desc *gpio_yp;
44 struct gpio_desc *gpio_ym;
45 int pen_irq;
46 int min_pressure;
47 bool stop_touchscreen;
48};
49
50/*
51 * Enables given plates and measures touch parameters using ADC
52 */
53static int adc_ts_measure(struct iio_channel *channel,
54 struct gpio_desc *plate_p, struct gpio_desc *plate_m)
55{
56 int i, value = 0, val = 0;
57 int error;
58
59 gpiod_set_value(plate_p, 1);
60 gpiod_set_value(plate_m, 1);
61
62 usleep_range(COLI_TOUCH_MIN_DELAY_US, COLI_TOUCH_MAX_DELAY_US);
63
64 for (i = 0; i < COLI_TOUCH_NO_OF_AVGS; i++) {
65 error = iio_read_channel_raw(channel, &val);
66 if (error < 0) {
67 value = error;
68 goto error_iio_read;
69 }
70
71 value += val;
72 }
73
74 value /= COLI_TOUCH_NO_OF_AVGS;
75
76error_iio_read:
77 gpiod_set_value(plate_p, 0);
78 gpiod_set_value(plate_m, 0);
79
80 return value;
81}
82
83/*
84 * Enable touch detection using falling edge detection on XM
85 */
86static void vf50_ts_enable_touch_detection(struct vf50_touch_device *vf50_ts)
87{
88 /* Enable plate YM (needs to be strong GND, high active) */
89 gpiod_set_value(vf50_ts->gpio_ym, 1);
90
91 /*
92 * Let the platform mux to idle state in order to enable
93 * Pull-Up on GPIO
94 */
95 pinctrl_pm_select_idle_state(&vf50_ts->pdev->dev);
96
97 /* Wait for the pull-up to be stable on high */
98 usleep_range(COLI_PULLUP_MIN_DELAY_US, COLI_PULLUP_MAX_DELAY_US);
99}
100
101/*
102 * ADC touch screen sampling bottom half irq handler
103 */
104static irqreturn_t vf50_ts_irq_bh(int irq, void *private)
105{
106 struct vf50_touch_device *vf50_ts = private;
107 struct device *dev = &vf50_ts->pdev->dev;
108 int val_x, val_y, val_z1, val_z2, val_p = 0;
109 bool discard_val_on_start = true;
110
111 /* Disable the touch detection plates */
112 gpiod_set_value(vf50_ts->gpio_ym, 0);
113
114 /* Let the platform mux to default state in order to mux as ADC */
115 pinctrl_pm_select_default_state(dev);
116
117 while (!vf50_ts->stop_touchscreen) {
118 /* X-Direction */
119 val_x = adc_ts_measure(&vf50_ts->channels[0],
120 vf50_ts->gpio_xp, vf50_ts->gpio_xm);
121 if (val_x < 0)
122 break;
123
124 /* Y-Direction */
125 val_y = adc_ts_measure(&vf50_ts->channels[1],
126 vf50_ts->gpio_yp, vf50_ts->gpio_ym);
127 if (val_y < 0)
128 break;
129
130 /*
131 * Touch pressure
132 * Measure on XP/YM
133 */
134 val_z1 = adc_ts_measure(&vf50_ts->channels[2],
135 vf50_ts->gpio_yp, vf50_ts->gpio_xm);
136 if (val_z1 < 0)
137 break;
138 val_z2 = adc_ts_measure(&vf50_ts->channels[3],
139 vf50_ts->gpio_yp, vf50_ts->gpio_xm);
140 if (val_z2 < 0)
141 break;
142
143 /* Validate signal (avoid calculation using noise) */
144 if (val_z1 > 64 && val_x > 64) {
145 /*
146 * Calculate resistance between the plates
147 * lower resistance means higher pressure
148 */
149 int r_x = (1000 * val_x) / VF_ADC_MAX;
150
151 val_p = (r_x * val_z2) / val_z1 - r_x;
152
153 } else {
154 val_p = 2000;
155 }
156
157 val_p = 2000 - val_p;
158 dev_dbg(dev,
159 "Measured values: x: %d, y: %d, z1: %d, z2: %d, p: %d\n",
160 val_x, val_y, val_z1, val_z2, val_p);
161
162 /*
163 * If touch pressure is too low, stop measuring and reenable
164 * touch detection
165 */
166 if (val_p < vf50_ts->min_pressure || val_p > 2000)
167 break;
168
169 /*
170 * The pressure may not be enough for the first x and the
171 * second y measurement, but, the pressure is ok when the
172 * driver is doing the third and fourth measurement. To
173 * take care of this, we drop the first measurement always.
174 */
175 if (discard_val_on_start) {
176 discard_val_on_start = false;
177 } else {
178 /*
179 * Report touch position and sleep for
180 * the next measurement.
181 */
182 input_report_abs(vf50_ts->ts_input,
183 ABS_X, VF_ADC_MAX - val_x);
184 input_report_abs(vf50_ts->ts_input,
185 ABS_Y, VF_ADC_MAX - val_y);
186 input_report_abs(vf50_ts->ts_input,
187 ABS_PRESSURE, val_p);
188 input_report_key(vf50_ts->ts_input, BTN_TOUCH, 1);
189 input_sync(vf50_ts->ts_input);
190 }
191
192 usleep_range(COLI_PULLUP_MIN_DELAY_US,
193 COLI_PULLUP_MAX_DELAY_US);
194 }
195
196 /* Report no more touch, re-enable touch detection */
197 input_report_abs(vf50_ts->ts_input, ABS_PRESSURE, 0);
198 input_report_key(vf50_ts->ts_input, BTN_TOUCH, 0);
199 input_sync(vf50_ts->ts_input);
200
201 vf50_ts_enable_touch_detection(vf50_ts);
202
203 return IRQ_HANDLED;
204}
205
206static int vf50_ts_open(struct input_dev *dev_input)
207{
208 struct vf50_touch_device *touchdev = input_get_drvdata(dev_input);
209 struct device *dev = &touchdev->pdev->dev;
210
211 dev_dbg(dev, "Input device %s opened, starting touch detection\n",
212 dev_input->name);
213
214 touchdev->stop_touchscreen = false;
215
216 /* Mux detection before request IRQ, wait for pull-up to settle */
217 vf50_ts_enable_touch_detection(touchdev);
218
219 return 0;
220}
221
222static void vf50_ts_close(struct input_dev *dev_input)
223{
224 struct vf50_touch_device *touchdev = input_get_drvdata(dev_input);
225 struct device *dev = &touchdev->pdev->dev;
226
227 touchdev->stop_touchscreen = true;
228
229 /* Make sure IRQ is not running past close */
230 mb();
231 synchronize_irq(touchdev->pen_irq);
232
233 gpiod_set_value(touchdev->gpio_ym, 0);
234 pinctrl_pm_select_default_state(dev);
235
236 dev_dbg(dev, "Input device %s closed, disable touch detection\n",
237 dev_input->name);
238}
239
240static int vf50_ts_get_gpiod(struct device *dev, struct gpio_desc **gpio_d,
241 const char *con_id, enum gpiod_flags flags)
242{
243 int error;
244
245 *gpio_d = devm_gpiod_get(dev, con_id, flags);
246 if (IS_ERR(*gpio_d)) {
247 error = PTR_ERR(*gpio_d);
248 dev_err(dev, "Could not get gpio_%s %d\n", con_id, error);
249 return error;
250 }
251
252 return 0;
253}
254
255static void vf50_ts_channel_release(void *data)
256{
257 struct iio_channel *channels = data;
258
259 iio_channel_release_all(channels);
260}
261
262static int vf50_ts_probe(struct platform_device *pdev)
263{
264 struct input_dev *input;
265 struct iio_channel *channels;
266 struct device *dev = &pdev->dev;
267 struct vf50_touch_device *touchdev;
268 int num_adc_channels;
269 int error;
270
271 channels = iio_channel_get_all(dev);
272 if (IS_ERR(channels))
273 return PTR_ERR(channels);
274
275 error = devm_add_action(dev, vf50_ts_channel_release, channels);
276 if (error) {
277 iio_channel_release_all(channels);
278 dev_err(dev, "Failed to register iio channel release action");
279 return error;
280 }
281
282 num_adc_channels = 0;
283 while (channels[num_adc_channels].indio_dev)
284 num_adc_channels++;
285
286 if (num_adc_channels != COLI_TOUCH_REQ_ADC_CHAN) {
287 dev_err(dev, "Inadequate ADC channels specified\n");
288 return -EINVAL;
289 }
290
291 touchdev = devm_kzalloc(dev, sizeof(*touchdev), GFP_KERNEL);
292 if (!touchdev)
293 return -ENOMEM;
294
295 touchdev->pdev = pdev;
296 touchdev->channels = channels;
297
298 error = of_property_read_u32(dev->of_node, "vf50-ts-min-pressure",
299 &touchdev->min_pressure);
300 if (error)
301 return error;
302
303 input = devm_input_allocate_device(dev);
304 if (!input) {
305 dev_err(dev, "Failed to allocate TS input device\n");
306 return -ENOMEM;
307 }
308
309 input->name = DRIVER_NAME;
310 input->id.bustype = BUS_HOST;
311 input->dev.parent = dev;
312 input->open = vf50_ts_open;
313 input->close = vf50_ts_close;
314
315 input_set_capability(input, EV_KEY, BTN_TOUCH);
316 input_set_abs_params(input, ABS_X, 0, VF_ADC_MAX, 0, 0);
317 input_set_abs_params(input, ABS_Y, 0, VF_ADC_MAX, 0, 0);
318 input_set_abs_params(input, ABS_PRESSURE, 0, VF_ADC_MAX, 0, 0);
319
320 touchdev->ts_input = input;
321 input_set_drvdata(input, touchdev);
322
323 error = input_register_device(input);
324 if (error) {
325 dev_err(dev, "Failed to register input device\n");
326 return error;
327 }
328
329 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xp, "xp", GPIOD_OUT_LOW);
330 if (error)
331 return error;
332
333 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xm,
334 "xm", GPIOD_OUT_LOW);
335 if (error)
336 return error;
337
338 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_yp, "yp", GPIOD_OUT_LOW);
339 if (error)
340 return error;
341
342 error = vf50_ts_get_gpiod(dev, &touchdev->gpio_ym, "ym", GPIOD_OUT_LOW);
343 if (error)
344 return error;
345
346 touchdev->pen_irq = platform_get_irq(pdev, 0);
347 if (touchdev->pen_irq < 0)
348 return touchdev->pen_irq;
349
350 error = devm_request_threaded_irq(dev, touchdev->pen_irq,
351 NULL, vf50_ts_irq_bh, IRQF_ONESHOT,
352 "vf50 touch", touchdev);
353 if (error) {
354 dev_err(dev, "Failed to request IRQ %d: %d\n",
355 touchdev->pen_irq, error);
356 return error;
357 }
358
359 return 0;
360}
361
362static const struct of_device_id vf50_touch_of_match[] = {
363 { .compatible = "toradex,vf50-touchscreen", },
364 { }
365};
366MODULE_DEVICE_TABLE(of, vf50_touch_of_match);
367
368static struct platform_driver vf50_touch_driver = {
369 .driver = {
370 .name = "toradex,vf50_touchctrl",
371 .of_match_table = vf50_touch_of_match,
372 },
373 .probe = vf50_ts_probe,
374};
375module_platform_driver(vf50_touch_driver);
376
377MODULE_AUTHOR("Sanchayan Maity");
378MODULE_DESCRIPTION("Colibri VF50 Touchscreen driver");
379MODULE_LICENSE("GPL");