Loading...
1// SPDX-License-Identifier: GPL-2.0
2// Copyright (c) 2018 MediaTek Inc.
3
4/*
5 * Bluetooth support for MediaTek serial devices
6 *
7 * Author: Sean Wang <sean.wang@mediatek.com>
8 *
9 */
10
11#include <asm/unaligned.h>
12#include <linux/atomic.h>
13#include <linux/clk.h>
14#include <linux/firmware.h>
15#include <linux/gpio/consumer.h>
16#include <linux/iopoll.h>
17#include <linux/kernel.h>
18#include <linux/module.h>
19#include <linux/of.h>
20#include <linux/of_device.h>
21#include <linux/pinctrl/consumer.h>
22#include <linux/pm_runtime.h>
23#include <linux/regulator/consumer.h>
24#include <linux/serdev.h>
25#include <linux/skbuff.h>
26
27#include <net/bluetooth/bluetooth.h>
28#include <net/bluetooth/hci_core.h>
29
30#include "h4_recv.h"
31#include "btmtk.h"
32
33#define VERSION "0.2"
34
35#define MTK_STP_TLR_SIZE 2
36
37#define BTMTKUART_TX_STATE_ACTIVE 1
38#define BTMTKUART_TX_STATE_WAKEUP 2
39#define BTMTKUART_TX_WAIT_VND_EVT 3
40#define BTMTKUART_REQUIRED_WAKEUP 4
41
42#define BTMTKUART_FLAG_STANDALONE_HW BIT(0)
43
44struct mtk_stp_hdr {
45 u8 prefix;
46 __be16 dlen;
47 u8 cs;
48} __packed;
49
50struct btmtkuart_data {
51 unsigned int flags;
52 const char *fwname;
53};
54
55struct btmtkuart_dev {
56 struct hci_dev *hdev;
57 struct serdev_device *serdev;
58
59 struct clk *clk;
60 struct clk *osc;
61 struct regulator *vcc;
62 struct gpio_desc *reset;
63 struct gpio_desc *boot;
64 struct pinctrl *pinctrl;
65 struct pinctrl_state *pins_runtime;
66 struct pinctrl_state *pins_boot;
67 speed_t desired_speed;
68 speed_t curr_speed;
69
70 struct work_struct tx_work;
71 unsigned long tx_state;
72 struct sk_buff_head txq;
73
74 struct sk_buff *rx_skb;
75 struct sk_buff *evt_skb;
76
77 u8 stp_pad[6];
78 u8 stp_cursor;
79 u16 stp_dlen;
80
81 const struct btmtkuart_data *data;
82};
83
84#define btmtkuart_is_standalone(bdev) \
85 ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
86#define btmtkuart_is_builtin_soc(bdev) \
87 !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
88
89static int mtk_hci_wmt_sync(struct hci_dev *hdev,
90 struct btmtk_hci_wmt_params *wmt_params)
91{
92 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
93 struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
94 u32 hlen, status = BTMTK_WMT_INVALID;
95 struct btmtk_hci_wmt_evt *wmt_evt;
96 struct btmtk_hci_wmt_cmd *wc;
97 struct btmtk_wmt_hdr *hdr;
98 int err;
99
100 /* Send the WMT command and wait until the WMT event returns */
101 hlen = sizeof(*hdr) + wmt_params->dlen;
102 if (hlen > 255) {
103 err = -EINVAL;
104 goto err_free_skb;
105 }
106
107 wc = kzalloc(hlen, GFP_KERNEL);
108 if (!wc) {
109 err = -ENOMEM;
110 goto err_free_skb;
111 }
112
113 hdr = &wc->hdr;
114 hdr->dir = 1;
115 hdr->op = wmt_params->op;
116 hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
117 hdr->flag = wmt_params->flag;
118 memcpy(wc->data, wmt_params->data, wmt_params->dlen);
119
120 set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
121
122 err = __hci_cmd_send(hdev, 0xfc6f, hlen, wc);
123 if (err < 0) {
124 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
125 goto err_free_wc;
126 }
127
128 /* The vendor specific WMT commands are all answered by a vendor
129 * specific event and will not have the Command Status or Command
130 * Complete as with usual HCI command flow control.
131 *
132 * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT
133 * state to be cleared. The driver specific event receive routine
134 * will clear that state and with that indicate completion of the
135 * WMT command.
136 */
137 err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT,
138 TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
139 if (err == -EINTR) {
140 bt_dev_err(hdev, "Execution of wmt command interrupted");
141 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
142 goto err_free_wc;
143 }
144
145 if (err) {
146 bt_dev_err(hdev, "Execution of wmt command timed out");
147 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
148 err = -ETIMEDOUT;
149 goto err_free_wc;
150 }
151
152 /* Parse and handle the return WMT event */
153 wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
154 if (wmt_evt->whdr.op != hdr->op) {
155 bt_dev_err(hdev, "Wrong op received %d expected %d",
156 wmt_evt->whdr.op, hdr->op);
157 err = -EIO;
158 goto err_free_wc;
159 }
160
161 switch (wmt_evt->whdr.op) {
162 case BTMTK_WMT_SEMAPHORE:
163 if (wmt_evt->whdr.flag == 2)
164 status = BTMTK_WMT_PATCH_UNDONE;
165 else
166 status = BTMTK_WMT_PATCH_DONE;
167 break;
168 case BTMTK_WMT_FUNC_CTRL:
169 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
170 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
171 status = BTMTK_WMT_ON_DONE;
172 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
173 status = BTMTK_WMT_ON_PROGRESS;
174 else
175 status = BTMTK_WMT_ON_UNDONE;
176 break;
177 }
178
179 if (wmt_params->status)
180 *wmt_params->status = status;
181
182err_free_wc:
183 kfree(wc);
184err_free_skb:
185 kfree_skb(bdev->evt_skb);
186 bdev->evt_skb = NULL;
187
188 return err;
189}
190
191static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
192{
193 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
194 struct hci_event_hdr *hdr = (void *)skb->data;
195 int err;
196
197 /* When someone waits for the WMT event, the skb is being cloned
198 * and being processed the events from there then.
199 */
200 if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) {
201 bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
202 if (!bdev->evt_skb) {
203 err = -ENOMEM;
204 goto err_out;
205 }
206 }
207
208 err = hci_recv_frame(hdev, skb);
209 if (err < 0)
210 goto err_free_skb;
211
212 if (hdr->evt == HCI_EV_WMT) {
213 if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT,
214 &bdev->tx_state)) {
215 /* Barrier to sync with other CPUs */
216 smp_mb__after_atomic();
217 wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT);
218 }
219 }
220
221 return 0;
222
223err_free_skb:
224 kfree_skb(bdev->evt_skb);
225 bdev->evt_skb = NULL;
226
227err_out:
228 return err;
229}
230
231static const struct h4_recv_pkt mtk_recv_pkts[] = {
232 { H4_RECV_ACL, .recv = hci_recv_frame },
233 { H4_RECV_SCO, .recv = hci_recv_frame },
234 { H4_RECV_EVENT, .recv = btmtkuart_recv_event },
235};
236
237static void btmtkuart_tx_work(struct work_struct *work)
238{
239 struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev,
240 tx_work);
241 struct serdev_device *serdev = bdev->serdev;
242 struct hci_dev *hdev = bdev->hdev;
243
244 while (1) {
245 clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
246
247 while (1) {
248 struct sk_buff *skb = skb_dequeue(&bdev->txq);
249 int len;
250
251 if (!skb)
252 break;
253
254 len = serdev_device_write_buf(serdev, skb->data,
255 skb->len);
256 hdev->stat.byte_tx += len;
257
258 skb_pull(skb, len);
259 if (skb->len > 0) {
260 skb_queue_head(&bdev->txq, skb);
261 break;
262 }
263
264 switch (hci_skb_pkt_type(skb)) {
265 case HCI_COMMAND_PKT:
266 hdev->stat.cmd_tx++;
267 break;
268 case HCI_ACLDATA_PKT:
269 hdev->stat.acl_tx++;
270 break;
271 case HCI_SCODATA_PKT:
272 hdev->stat.sco_tx++;
273 break;
274 }
275
276 kfree_skb(skb);
277 }
278
279 if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state))
280 break;
281 }
282
283 clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state);
284}
285
286static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev)
287{
288 if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state))
289 set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
290
291 schedule_work(&bdev->tx_work);
292}
293
294static const unsigned char *
295mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count,
296 int *sz_h4)
297{
298 struct mtk_stp_hdr *shdr;
299
300 /* The cursor is reset when all the data of STP is consumed out */
301 if (!bdev->stp_dlen && bdev->stp_cursor >= 6)
302 bdev->stp_cursor = 0;
303
304 /* Filling pad until all STP info is obtained */
305 while (bdev->stp_cursor < 6 && count > 0) {
306 bdev->stp_pad[bdev->stp_cursor] = *data;
307 bdev->stp_cursor++;
308 data++;
309 count--;
310 }
311
312 /* Retrieve STP info and have a sanity check */
313 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) {
314 shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2];
315 bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff;
316
317 /* Resync STP when unexpected data is being read */
318 if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) {
319 bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)",
320 shdr->prefix, bdev->stp_dlen);
321 bdev->stp_cursor = 2;
322 bdev->stp_dlen = 0;
323 }
324 }
325
326 /* Directly quit when there's no data found for H4 can process */
327 if (count <= 0)
328 return NULL;
329
330 /* Tranlate to how much the size of data H4 can handle so far */
331 *sz_h4 = min_t(int, count, bdev->stp_dlen);
332
333 /* Update the remaining size of STP packet */
334 bdev->stp_dlen -= *sz_h4;
335
336 /* Data points to STP payload which can be handled by H4 */
337 return data;
338}
339
340static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count)
341{
342 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
343 const unsigned char *p_left = data, *p_h4;
344 int sz_left = count, sz_h4, adv;
345 int err;
346
347 while (sz_left > 0) {
348 /* The serial data received from MT7622 BT controller is
349 * at all time padded around with the STP header and tailer.
350 *
351 * A full STP packet is looking like
352 * -----------------------------------
353 * | STP header | H:4 | STP tailer |
354 * -----------------------------------
355 * but it doesn't guarantee to contain a full H:4 packet which
356 * means that it's possible for multiple STP packets forms a
357 * full H:4 packet that means extra STP header + length doesn't
358 * indicate a full H:4 frame, things can fragment. Whose length
359 * recorded in STP header just shows up the most length the
360 * H:4 engine can handle currently.
361 */
362
363 p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4);
364 if (!p_h4)
365 break;
366
367 adv = p_h4 - p_left;
368 sz_left -= adv;
369 p_left += adv;
370
371 bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4,
372 sz_h4, mtk_recv_pkts,
373 ARRAY_SIZE(mtk_recv_pkts));
374 if (IS_ERR(bdev->rx_skb)) {
375 err = PTR_ERR(bdev->rx_skb);
376 bt_dev_err(bdev->hdev,
377 "Frame reassembly failed (%d)", err);
378 bdev->rx_skb = NULL;
379 return err;
380 }
381
382 sz_left -= sz_h4;
383 p_left += sz_h4;
384 }
385
386 return 0;
387}
388
389static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data,
390 size_t count)
391{
392 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
393 int err;
394
395 err = btmtkuart_recv(bdev->hdev, data, count);
396 if (err < 0)
397 return err;
398
399 bdev->hdev->stat.byte_rx += count;
400
401 return count;
402}
403
404static void btmtkuart_write_wakeup(struct serdev_device *serdev)
405{
406 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
407
408 btmtkuart_tx_wakeup(bdev);
409}
410
411static const struct serdev_device_ops btmtkuart_client_ops = {
412 .receive_buf = btmtkuart_receive_buf,
413 .write_wakeup = btmtkuart_write_wakeup,
414};
415
416static int btmtkuart_open(struct hci_dev *hdev)
417{
418 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
419 struct device *dev;
420 int err;
421
422 err = serdev_device_open(bdev->serdev);
423 if (err) {
424 bt_dev_err(hdev, "Unable to open UART device %s",
425 dev_name(&bdev->serdev->dev));
426 goto err_open;
427 }
428
429 if (btmtkuart_is_standalone(bdev)) {
430 if (bdev->curr_speed != bdev->desired_speed)
431 err = serdev_device_set_baudrate(bdev->serdev,
432 115200);
433 else
434 err = serdev_device_set_baudrate(bdev->serdev,
435 bdev->desired_speed);
436
437 if (err < 0) {
438 bt_dev_err(hdev, "Unable to set baudrate UART device %s",
439 dev_name(&bdev->serdev->dev));
440 goto err_serdev_close;
441 }
442
443 serdev_device_set_flow_control(bdev->serdev, false);
444 }
445
446 bdev->stp_cursor = 2;
447 bdev->stp_dlen = 0;
448
449 dev = &bdev->serdev->dev;
450
451 /* Enable the power domain and clock the device requires */
452 pm_runtime_enable(dev);
453 err = pm_runtime_resume_and_get(dev);
454 if (err < 0)
455 goto err_disable_rpm;
456
457 err = clk_prepare_enable(bdev->clk);
458 if (err < 0)
459 goto err_put_rpm;
460
461 return 0;
462
463err_put_rpm:
464 pm_runtime_put_sync(dev);
465err_disable_rpm:
466 pm_runtime_disable(dev);
467err_serdev_close:
468 serdev_device_close(bdev->serdev);
469err_open:
470 return err;
471}
472
473static int btmtkuart_close(struct hci_dev *hdev)
474{
475 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
476 struct device *dev = &bdev->serdev->dev;
477
478 /* Shutdown the clock and power domain the device requires */
479 clk_disable_unprepare(bdev->clk);
480 pm_runtime_put_sync(dev);
481 pm_runtime_disable(dev);
482
483 serdev_device_close(bdev->serdev);
484
485 return 0;
486}
487
488static int btmtkuart_flush(struct hci_dev *hdev)
489{
490 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
491
492 /* Flush any pending characters */
493 serdev_device_write_flush(bdev->serdev);
494 skb_queue_purge(&bdev->txq);
495
496 cancel_work_sync(&bdev->tx_work);
497
498 kfree_skb(bdev->rx_skb);
499 bdev->rx_skb = NULL;
500
501 bdev->stp_cursor = 2;
502 bdev->stp_dlen = 0;
503
504 return 0;
505}
506
507static int btmtkuart_func_query(struct hci_dev *hdev)
508{
509 struct btmtk_hci_wmt_params wmt_params;
510 int status, err;
511 u8 param = 0;
512
513 /* Query whether the function is enabled */
514 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
515 wmt_params.flag = 4;
516 wmt_params.dlen = sizeof(param);
517 wmt_params.data = ¶m;
518 wmt_params.status = &status;
519
520 err = mtk_hci_wmt_sync(hdev, &wmt_params);
521 if (err < 0) {
522 bt_dev_err(hdev, "Failed to query function status (%d)", err);
523 return err;
524 }
525
526 return status;
527}
528
529static int btmtkuart_change_baudrate(struct hci_dev *hdev)
530{
531 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
532 struct btmtk_hci_wmt_params wmt_params;
533 __le32 baudrate;
534 u8 param;
535 int err;
536
537 /* Indicate the device to enter the probe state the host is
538 * ready to change a new baudrate.
539 */
540 baudrate = cpu_to_le32(bdev->desired_speed);
541 wmt_params.op = BTMTK_WMT_HIF;
542 wmt_params.flag = 1;
543 wmt_params.dlen = 4;
544 wmt_params.data = &baudrate;
545 wmt_params.status = NULL;
546
547 err = mtk_hci_wmt_sync(hdev, &wmt_params);
548 if (err < 0) {
549 bt_dev_err(hdev, "Failed to device baudrate (%d)", err);
550 return err;
551 }
552
553 err = serdev_device_set_baudrate(bdev->serdev,
554 bdev->desired_speed);
555 if (err < 0) {
556 bt_dev_err(hdev, "Failed to set up host baudrate (%d)",
557 err);
558 return err;
559 }
560
561 serdev_device_set_flow_control(bdev->serdev, false);
562
563 /* Send a dummy byte 0xff to activate the new baudrate */
564 param = 0xff;
565 err = serdev_device_write_buf(bdev->serdev, ¶m, sizeof(param));
566 if (err < 0 || err < sizeof(param))
567 return err;
568
569 serdev_device_wait_until_sent(bdev->serdev, 0);
570
571 /* Wait some time for the device changing baudrate done */
572 usleep_range(20000, 22000);
573
574 /* Test the new baudrate */
575 wmt_params.op = BTMTK_WMT_TEST;
576 wmt_params.flag = 7;
577 wmt_params.dlen = 0;
578 wmt_params.data = NULL;
579 wmt_params.status = NULL;
580
581 err = mtk_hci_wmt_sync(hdev, &wmt_params);
582 if (err < 0) {
583 bt_dev_err(hdev, "Failed to test new baudrate (%d)",
584 err);
585 return err;
586 }
587
588 bdev->curr_speed = bdev->desired_speed;
589
590 return 0;
591}
592
593static int btmtkuart_setup(struct hci_dev *hdev)
594{
595 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
596 struct btmtk_hci_wmt_params wmt_params;
597 ktime_t calltime, delta, rettime;
598 struct btmtk_tci_sleep tci_sleep;
599 unsigned long long duration;
600 struct sk_buff *skb;
601 int err, status;
602 u8 param = 0x1;
603
604 calltime = ktime_get();
605
606 /* Wakeup MCUSYS is required for certain devices before we start to
607 * do any setups.
608 */
609 if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) {
610 wmt_params.op = BTMTK_WMT_WAKEUP;
611 wmt_params.flag = 3;
612 wmt_params.dlen = 0;
613 wmt_params.data = NULL;
614 wmt_params.status = NULL;
615
616 err = mtk_hci_wmt_sync(hdev, &wmt_params);
617 if (err < 0) {
618 bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err);
619 return err;
620 }
621
622 clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
623 }
624
625 if (btmtkuart_is_standalone(bdev))
626 btmtkuart_change_baudrate(hdev);
627
628 /* Query whether the firmware is already download */
629 wmt_params.op = BTMTK_WMT_SEMAPHORE;
630 wmt_params.flag = 1;
631 wmt_params.dlen = 0;
632 wmt_params.data = NULL;
633 wmt_params.status = &status;
634
635 err = mtk_hci_wmt_sync(hdev, &wmt_params);
636 if (err < 0) {
637 bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
638 return err;
639 }
640
641 if (status == BTMTK_WMT_PATCH_DONE) {
642 bt_dev_info(hdev, "Firmware already downloaded");
643 goto ignore_setup_fw;
644 }
645
646 /* Setup a firmware which the device definitely requires */
647 err = btmtk_setup_firmware(hdev, bdev->data->fwname, mtk_hci_wmt_sync);
648 if (err < 0)
649 return err;
650
651ignore_setup_fw:
652 /* Query whether the device is already enabled */
653 err = readx_poll_timeout(btmtkuart_func_query, hdev, status,
654 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
655 2000, 5000000);
656 /* -ETIMEDOUT happens */
657 if (err < 0)
658 return err;
659
660 /* The other errors happen in btusb_mtk_func_query */
661 if (status < 0)
662 return status;
663
664 if (status == BTMTK_WMT_ON_DONE) {
665 bt_dev_info(hdev, "function already on");
666 goto ignore_func_on;
667 }
668
669 /* Enable Bluetooth protocol */
670 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
671 wmt_params.flag = 0;
672 wmt_params.dlen = sizeof(param);
673 wmt_params.data = ¶m;
674 wmt_params.status = NULL;
675
676 err = mtk_hci_wmt_sync(hdev, &wmt_params);
677 if (err < 0) {
678 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
679 return err;
680 }
681
682ignore_func_on:
683 /* Apply the low power environment setup */
684 tci_sleep.mode = 0x5;
685 tci_sleep.duration = cpu_to_le16(0x640);
686 tci_sleep.host_duration = cpu_to_le16(0x640);
687 tci_sleep.host_wakeup_pin = 0;
688 tci_sleep.time_compensation = 0;
689
690 skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
691 HCI_INIT_TIMEOUT);
692 if (IS_ERR(skb)) {
693 err = PTR_ERR(skb);
694 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
695 return err;
696 }
697 kfree_skb(skb);
698
699 rettime = ktime_get();
700 delta = ktime_sub(rettime, calltime);
701 duration = (unsigned long long)ktime_to_ns(delta) >> 10;
702
703 bt_dev_info(hdev, "Device setup in %llu usecs", duration);
704
705 return 0;
706}
707
708static int btmtkuart_shutdown(struct hci_dev *hdev)
709{
710 struct btmtk_hci_wmt_params wmt_params;
711 u8 param = 0x0;
712 int err;
713
714 /* Disable the device */
715 wmt_params.op = BTMTK_WMT_FUNC_CTRL;
716 wmt_params.flag = 0;
717 wmt_params.dlen = sizeof(param);
718 wmt_params.data = ¶m;
719 wmt_params.status = NULL;
720
721 err = mtk_hci_wmt_sync(hdev, &wmt_params);
722 if (err < 0) {
723 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
724 return err;
725 }
726
727 return 0;
728}
729
730static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
731{
732 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
733 struct mtk_stp_hdr *shdr;
734 int err, dlen, type = 0;
735
736 /* Prepend skb with frame type */
737 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
738
739 /* Make sure that there is enough rooms for STP header and trailer */
740 if (unlikely(skb_headroom(skb) < sizeof(*shdr)) ||
741 (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) {
742 err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE,
743 GFP_ATOMIC);
744 if (err < 0)
745 return err;
746 }
747
748 /* Add the STP header */
749 dlen = skb->len;
750 shdr = skb_push(skb, sizeof(*shdr));
751 shdr->prefix = 0x80;
752 shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12));
753 shdr->cs = 0; /* MT7622 doesn't care about checksum value */
754
755 /* Add the STP trailer */
756 skb_put_zero(skb, MTK_STP_TLR_SIZE);
757
758 skb_queue_tail(&bdev->txq, skb);
759
760 btmtkuart_tx_wakeup(bdev);
761 return 0;
762}
763
764static int btmtkuart_parse_dt(struct serdev_device *serdev)
765{
766 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
767 struct device_node *node = serdev->dev.of_node;
768 u32 speed = 921600;
769 int err;
770
771 if (btmtkuart_is_standalone(bdev)) {
772 of_property_read_u32(node, "current-speed", &speed);
773
774 bdev->desired_speed = speed;
775
776 bdev->vcc = devm_regulator_get(&serdev->dev, "vcc");
777 if (IS_ERR(bdev->vcc)) {
778 err = PTR_ERR(bdev->vcc);
779 return err;
780 }
781
782 bdev->osc = devm_clk_get_optional(&serdev->dev, "osc");
783 if (IS_ERR(bdev->osc)) {
784 err = PTR_ERR(bdev->osc);
785 return err;
786 }
787
788 bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot",
789 GPIOD_OUT_LOW);
790 if (IS_ERR(bdev->boot)) {
791 err = PTR_ERR(bdev->boot);
792 return err;
793 }
794
795 bdev->pinctrl = devm_pinctrl_get(&serdev->dev);
796 if (IS_ERR(bdev->pinctrl)) {
797 err = PTR_ERR(bdev->pinctrl);
798 return err;
799 }
800
801 bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl,
802 "default");
803 if (IS_ERR(bdev->pins_boot) && !bdev->boot) {
804 err = PTR_ERR(bdev->pins_boot);
805 dev_err(&serdev->dev,
806 "Should assign RXD to LOW at boot stage\n");
807 return err;
808 }
809
810 bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl,
811 "runtime");
812 if (IS_ERR(bdev->pins_runtime)) {
813 err = PTR_ERR(bdev->pins_runtime);
814 return err;
815 }
816
817 bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset",
818 GPIOD_OUT_LOW);
819 if (IS_ERR(bdev->reset)) {
820 err = PTR_ERR(bdev->reset);
821 return err;
822 }
823 } else if (btmtkuart_is_builtin_soc(bdev)) {
824 bdev->clk = devm_clk_get(&serdev->dev, "ref");
825 if (IS_ERR(bdev->clk))
826 return PTR_ERR(bdev->clk);
827 }
828
829 return 0;
830}
831
832static int btmtkuart_probe(struct serdev_device *serdev)
833{
834 struct btmtkuart_dev *bdev;
835 struct hci_dev *hdev;
836 int err;
837
838 bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL);
839 if (!bdev)
840 return -ENOMEM;
841
842 bdev->data = of_device_get_match_data(&serdev->dev);
843 if (!bdev->data)
844 return -ENODEV;
845
846 bdev->serdev = serdev;
847 serdev_device_set_drvdata(serdev, bdev);
848
849 serdev_device_set_client_ops(serdev, &btmtkuart_client_ops);
850
851 err = btmtkuart_parse_dt(serdev);
852 if (err < 0)
853 return err;
854
855 INIT_WORK(&bdev->tx_work, btmtkuart_tx_work);
856 skb_queue_head_init(&bdev->txq);
857
858 /* Initialize and register HCI device */
859 hdev = hci_alloc_dev();
860 if (!hdev) {
861 dev_err(&serdev->dev, "Can't allocate HCI device\n");
862 return -ENOMEM;
863 }
864
865 bdev->hdev = hdev;
866
867 hdev->bus = HCI_UART;
868 hci_set_drvdata(hdev, bdev);
869
870 hdev->open = btmtkuart_open;
871 hdev->close = btmtkuart_close;
872 hdev->flush = btmtkuart_flush;
873 hdev->setup = btmtkuart_setup;
874 hdev->shutdown = btmtkuart_shutdown;
875 hdev->send = btmtkuart_send_frame;
876 hdev->set_bdaddr = btmtk_set_bdaddr;
877 SET_HCIDEV_DEV(hdev, &serdev->dev);
878
879 hdev->manufacturer = 70;
880 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
881
882 if (btmtkuart_is_standalone(bdev)) {
883 err = clk_prepare_enable(bdev->osc);
884 if (err < 0)
885 goto err_hci_free_dev;
886
887 if (bdev->boot) {
888 gpiod_set_value_cansleep(bdev->boot, 1);
889 } else {
890 /* Switch to the specific pin state for the booting
891 * requires.
892 */
893 pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
894 }
895
896 /* Power on */
897 err = regulator_enable(bdev->vcc);
898 if (err < 0)
899 goto err_clk_disable_unprepare;
900
901 /* Reset if the reset-gpios is available otherwise the board
902 * -level design should be guaranteed.
903 */
904 if (bdev->reset) {
905 gpiod_set_value_cansleep(bdev->reset, 1);
906 usleep_range(1000, 2000);
907 gpiod_set_value_cansleep(bdev->reset, 0);
908 }
909
910 /* Wait some time until device got ready and switch to the pin
911 * mode the device requires for UART transfers.
912 */
913 msleep(50);
914
915 if (bdev->boot)
916 devm_gpiod_put(&serdev->dev, bdev->boot);
917
918 pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime);
919
920 /* A standalone device doesn't depends on power domain on SoC,
921 * so mark it as no callbacks.
922 */
923 pm_runtime_no_callbacks(&serdev->dev);
924
925 set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
926 }
927
928 err = hci_register_dev(hdev);
929 if (err < 0) {
930 dev_err(&serdev->dev, "Can't register HCI device\n");
931 goto err_regulator_disable;
932 }
933
934 return 0;
935
936err_regulator_disable:
937 if (btmtkuart_is_standalone(bdev))
938 regulator_disable(bdev->vcc);
939err_clk_disable_unprepare:
940 if (btmtkuart_is_standalone(bdev))
941 clk_disable_unprepare(bdev->osc);
942err_hci_free_dev:
943 hci_free_dev(hdev);
944
945 return err;
946}
947
948static void btmtkuart_remove(struct serdev_device *serdev)
949{
950 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
951 struct hci_dev *hdev = bdev->hdev;
952
953 if (btmtkuart_is_standalone(bdev)) {
954 regulator_disable(bdev->vcc);
955 clk_disable_unprepare(bdev->osc);
956 }
957
958 hci_unregister_dev(hdev);
959 hci_free_dev(hdev);
960}
961
962static const struct btmtkuart_data mt7622_data = {
963 .fwname = FIRMWARE_MT7622,
964};
965
966static const struct btmtkuart_data mt7663_data = {
967 .flags = BTMTKUART_FLAG_STANDALONE_HW,
968 .fwname = FIRMWARE_MT7663,
969};
970
971static const struct btmtkuart_data mt7668_data = {
972 .flags = BTMTKUART_FLAG_STANDALONE_HW,
973 .fwname = FIRMWARE_MT7668,
974};
975
976#ifdef CONFIG_OF
977static const struct of_device_id mtk_of_match_table[] = {
978 { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data},
979 { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data},
980 { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data},
981 { }
982};
983MODULE_DEVICE_TABLE(of, mtk_of_match_table);
984#endif
985
986static struct serdev_device_driver btmtkuart_driver = {
987 .probe = btmtkuart_probe,
988 .remove = btmtkuart_remove,
989 .driver = {
990 .name = "btmtkuart",
991 .of_match_table = of_match_ptr(mtk_of_match_table),
992 },
993};
994
995module_serdev_device_driver(btmtkuart_driver);
996
997MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
998MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION);
999MODULE_VERSION(VERSION);
1000MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2// Copyright (c) 2018 MediaTek Inc.
3
4/*
5 * Bluetooth support for MediaTek serial devices
6 *
7 * Author: Sean Wang <sean.wang@mediatek.com>
8 *
9 */
10
11#include <asm/unaligned.h>
12#include <linux/atomic.h>
13#include <linux/clk.h>
14#include <linux/firmware.h>
15#include <linux/gpio/consumer.h>
16#include <linux/iopoll.h>
17#include <linux/kernel.h>
18#include <linux/module.h>
19#include <linux/of.h>
20#include <linux/of_device.h>
21#include <linux/pinctrl/consumer.h>
22#include <linux/pm_runtime.h>
23#include <linux/regulator/consumer.h>
24#include <linux/serdev.h>
25#include <linux/skbuff.h>
26
27#include <net/bluetooth/bluetooth.h>
28#include <net/bluetooth/hci_core.h>
29
30#include "h4_recv.h"
31
32#define VERSION "0.2"
33
34#define FIRMWARE_MT7622 "mediatek/mt7622pr2h.bin"
35#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
36#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
37
38#define MTK_STP_TLR_SIZE 2
39
40#define BTMTKUART_TX_STATE_ACTIVE 1
41#define BTMTKUART_TX_STATE_WAKEUP 2
42#define BTMTKUART_TX_WAIT_VND_EVT 3
43#define BTMTKUART_REQUIRED_WAKEUP 4
44
45#define BTMTKUART_FLAG_STANDALONE_HW BIT(0)
46
47enum {
48 MTK_WMT_PATCH_DWNLD = 0x1,
49 MTK_WMT_TEST = 0x2,
50 MTK_WMT_WAKEUP = 0x3,
51 MTK_WMT_HIF = 0x4,
52 MTK_WMT_FUNC_CTRL = 0x6,
53 MTK_WMT_RST = 0x7,
54 MTK_WMT_SEMAPHORE = 0x17,
55};
56
57enum {
58 BTMTK_WMT_INVALID,
59 BTMTK_WMT_PATCH_UNDONE,
60 BTMTK_WMT_PATCH_DONE,
61 BTMTK_WMT_ON_UNDONE,
62 BTMTK_WMT_ON_DONE,
63 BTMTK_WMT_ON_PROGRESS,
64};
65
66struct mtk_stp_hdr {
67 u8 prefix;
68 __be16 dlen;
69 u8 cs;
70} __packed;
71
72struct btmtkuart_data {
73 unsigned int flags;
74 const char *fwname;
75};
76
77struct mtk_wmt_hdr {
78 u8 dir;
79 u8 op;
80 __le16 dlen;
81 u8 flag;
82} __packed;
83
84struct mtk_hci_wmt_cmd {
85 struct mtk_wmt_hdr hdr;
86 u8 data[256];
87} __packed;
88
89struct btmtk_hci_wmt_evt {
90 struct hci_event_hdr hhdr;
91 struct mtk_wmt_hdr whdr;
92} __packed;
93
94struct btmtk_hci_wmt_evt_funcc {
95 struct btmtk_hci_wmt_evt hwhdr;
96 __be16 status;
97} __packed;
98
99struct btmtk_tci_sleep {
100 u8 mode;
101 __le16 duration;
102 __le16 host_duration;
103 u8 host_wakeup_pin;
104 u8 time_compensation;
105} __packed;
106
107struct btmtk_hci_wmt_params {
108 u8 op;
109 u8 flag;
110 u16 dlen;
111 const void *data;
112 u32 *status;
113};
114
115struct btmtkuart_dev {
116 struct hci_dev *hdev;
117 struct serdev_device *serdev;
118
119 struct clk *clk;
120 struct clk *osc;
121 struct regulator *vcc;
122 struct gpio_desc *reset;
123 struct gpio_desc *boot;
124 struct pinctrl *pinctrl;
125 struct pinctrl_state *pins_runtime;
126 struct pinctrl_state *pins_boot;
127 speed_t desired_speed;
128 speed_t curr_speed;
129
130 struct work_struct tx_work;
131 unsigned long tx_state;
132 struct sk_buff_head txq;
133
134 struct sk_buff *rx_skb;
135 struct sk_buff *evt_skb;
136
137 u8 stp_pad[6];
138 u8 stp_cursor;
139 u16 stp_dlen;
140
141 const struct btmtkuart_data *data;
142};
143
144#define btmtkuart_is_standalone(bdev) \
145 ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
146#define btmtkuart_is_builtin_soc(bdev) \
147 !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
148
149static int mtk_hci_wmt_sync(struct hci_dev *hdev,
150 struct btmtk_hci_wmt_params *wmt_params)
151{
152 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
153 struct btmtk_hci_wmt_evt_funcc *wmt_evt_funcc;
154 u32 hlen, status = BTMTK_WMT_INVALID;
155 struct btmtk_hci_wmt_evt *wmt_evt;
156 struct mtk_hci_wmt_cmd wc;
157 struct mtk_wmt_hdr *hdr;
158 int err;
159
160 hlen = sizeof(*hdr) + wmt_params->dlen;
161 if (hlen > 255)
162 return -EINVAL;
163
164 hdr = (struct mtk_wmt_hdr *)&wc;
165 hdr->dir = 1;
166 hdr->op = wmt_params->op;
167 hdr->dlen = cpu_to_le16(wmt_params->dlen + 1);
168 hdr->flag = wmt_params->flag;
169 memcpy(wc.data, wmt_params->data, wmt_params->dlen);
170
171 set_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
172
173 err = __hci_cmd_send(hdev, 0xfc6f, hlen, &wc);
174 if (err < 0) {
175 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
176 return err;
177 }
178
179 /* The vendor specific WMT commands are all answered by a vendor
180 * specific event and will not have the Command Status or Command
181 * Complete as with usual HCI command flow control.
182 *
183 * After sending the command, wait for BTMTKUART_TX_WAIT_VND_EVT
184 * state to be cleared. The driver specific event receive routine
185 * will clear that state and with that indicate completion of the
186 * WMT command.
187 */
188 err = wait_on_bit_timeout(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT,
189 TASK_INTERRUPTIBLE, HCI_INIT_TIMEOUT);
190 if (err == -EINTR) {
191 bt_dev_err(hdev, "Execution of wmt command interrupted");
192 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
193 return err;
194 }
195
196 if (err) {
197 bt_dev_err(hdev, "Execution of wmt command timed out");
198 clear_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state);
199 return -ETIMEDOUT;
200 }
201
202 /* Parse and handle the return WMT event */
203 wmt_evt = (struct btmtk_hci_wmt_evt *)bdev->evt_skb->data;
204 if (wmt_evt->whdr.op != hdr->op) {
205 bt_dev_err(hdev, "Wrong op received %d expected %d",
206 wmt_evt->whdr.op, hdr->op);
207 err = -EIO;
208 goto err_free_skb;
209 }
210
211 switch (wmt_evt->whdr.op) {
212 case MTK_WMT_SEMAPHORE:
213 if (wmt_evt->whdr.flag == 2)
214 status = BTMTK_WMT_PATCH_UNDONE;
215 else
216 status = BTMTK_WMT_PATCH_DONE;
217 break;
218 case MTK_WMT_FUNC_CTRL:
219 wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt;
220 if (be16_to_cpu(wmt_evt_funcc->status) == 0x404)
221 status = BTMTK_WMT_ON_DONE;
222 else if (be16_to_cpu(wmt_evt_funcc->status) == 0x420)
223 status = BTMTK_WMT_ON_PROGRESS;
224 else
225 status = BTMTK_WMT_ON_UNDONE;
226 break;
227 }
228
229 if (wmt_params->status)
230 *wmt_params->status = status;
231
232err_free_skb:
233 kfree_skb(bdev->evt_skb);
234 bdev->evt_skb = NULL;
235
236 return err;
237}
238
239static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
240{
241 struct btmtk_hci_wmt_params wmt_params;
242 const struct firmware *fw;
243 const u8 *fw_ptr;
244 size_t fw_size;
245 int err, dlen;
246 u8 flag;
247
248 err = request_firmware(&fw, fwname, &hdev->dev);
249 if (err < 0) {
250 bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
251 return err;
252 }
253
254 fw_ptr = fw->data;
255 fw_size = fw->size;
256
257 /* The size of patch header is 30 bytes, should be skip */
258 if (fw_size < 30) {
259 err = -EINVAL;
260 goto free_fw;
261 }
262
263 fw_size -= 30;
264 fw_ptr += 30;
265 flag = 1;
266
267 wmt_params.op = MTK_WMT_PATCH_DWNLD;
268 wmt_params.status = NULL;
269
270 while (fw_size > 0) {
271 dlen = min_t(int, 250, fw_size);
272
273 /* Tell device the position in sequence */
274 if (fw_size - dlen <= 0)
275 flag = 3;
276 else if (fw_size < fw->size - 30)
277 flag = 2;
278
279 wmt_params.flag = flag;
280 wmt_params.dlen = dlen;
281 wmt_params.data = fw_ptr;
282
283 err = mtk_hci_wmt_sync(hdev, &wmt_params);
284 if (err < 0) {
285 bt_dev_err(hdev, "Failed to send wmt patch dwnld (%d)",
286 err);
287 goto free_fw;
288 }
289
290 fw_size -= dlen;
291 fw_ptr += dlen;
292 }
293
294 wmt_params.op = MTK_WMT_RST;
295 wmt_params.flag = 4;
296 wmt_params.dlen = 0;
297 wmt_params.data = NULL;
298 wmt_params.status = NULL;
299
300 /* Activate funciton the firmware providing to */
301 err = mtk_hci_wmt_sync(hdev, &wmt_params);
302 if (err < 0) {
303 bt_dev_err(hdev, "Failed to send wmt rst (%d)", err);
304 goto free_fw;
305 }
306
307 /* Wait a few moments for firmware activation done */
308 usleep_range(10000, 12000);
309
310free_fw:
311 release_firmware(fw);
312 return err;
313}
314
315static int btmtkuart_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
316{
317 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
318 struct hci_event_hdr *hdr = (void *)skb->data;
319 int err;
320
321 /* Fix up the vendor event id with 0xff for vendor specific instead
322 * of 0xe4 so that event send via monitoring socket can be parsed
323 * properly.
324 */
325 if (hdr->evt == 0xe4)
326 hdr->evt = HCI_EV_VENDOR;
327
328 /* When someone waits for the WMT event, the skb is being cloned
329 * and being processed the events from there then.
330 */
331 if (test_bit(BTMTKUART_TX_WAIT_VND_EVT, &bdev->tx_state)) {
332 bdev->evt_skb = skb_clone(skb, GFP_KERNEL);
333 if (!bdev->evt_skb) {
334 err = -ENOMEM;
335 goto err_out;
336 }
337 }
338
339 err = hci_recv_frame(hdev, skb);
340 if (err < 0)
341 goto err_free_skb;
342
343 if (hdr->evt == HCI_EV_VENDOR) {
344 if (test_and_clear_bit(BTMTKUART_TX_WAIT_VND_EVT,
345 &bdev->tx_state)) {
346 /* Barrier to sync with other CPUs */
347 smp_mb__after_atomic();
348 wake_up_bit(&bdev->tx_state, BTMTKUART_TX_WAIT_VND_EVT);
349 }
350 }
351
352 return 0;
353
354err_free_skb:
355 kfree_skb(bdev->evt_skb);
356 bdev->evt_skb = NULL;
357
358err_out:
359 return err;
360}
361
362static const struct h4_recv_pkt mtk_recv_pkts[] = {
363 { H4_RECV_ACL, .recv = hci_recv_frame },
364 { H4_RECV_SCO, .recv = hci_recv_frame },
365 { H4_RECV_EVENT, .recv = btmtkuart_recv_event },
366};
367
368static void btmtkuart_tx_work(struct work_struct *work)
369{
370 struct btmtkuart_dev *bdev = container_of(work, struct btmtkuart_dev,
371 tx_work);
372 struct serdev_device *serdev = bdev->serdev;
373 struct hci_dev *hdev = bdev->hdev;
374
375 while (1) {
376 clear_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
377
378 while (1) {
379 struct sk_buff *skb = skb_dequeue(&bdev->txq);
380 int len;
381
382 if (!skb)
383 break;
384
385 len = serdev_device_write_buf(serdev, skb->data,
386 skb->len);
387 hdev->stat.byte_tx += len;
388
389 skb_pull(skb, len);
390 if (skb->len > 0) {
391 skb_queue_head(&bdev->txq, skb);
392 break;
393 }
394
395 switch (hci_skb_pkt_type(skb)) {
396 case HCI_COMMAND_PKT:
397 hdev->stat.cmd_tx++;
398 break;
399 case HCI_ACLDATA_PKT:
400 hdev->stat.acl_tx++;
401 break;
402 case HCI_SCODATA_PKT:
403 hdev->stat.sco_tx++;
404 break;
405 }
406
407 kfree_skb(skb);
408 }
409
410 if (!test_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state))
411 break;
412 }
413
414 clear_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state);
415}
416
417static void btmtkuart_tx_wakeup(struct btmtkuart_dev *bdev)
418{
419 if (test_and_set_bit(BTMTKUART_TX_STATE_ACTIVE, &bdev->tx_state))
420 set_bit(BTMTKUART_TX_STATE_WAKEUP, &bdev->tx_state);
421
422 schedule_work(&bdev->tx_work);
423}
424
425static const unsigned char *
426mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count,
427 int *sz_h4)
428{
429 struct mtk_stp_hdr *shdr;
430
431 /* The cursor is reset when all the data of STP is consumed out */
432 if (!bdev->stp_dlen && bdev->stp_cursor >= 6)
433 bdev->stp_cursor = 0;
434
435 /* Filling pad until all STP info is obtained */
436 while (bdev->stp_cursor < 6 && count > 0) {
437 bdev->stp_pad[bdev->stp_cursor] = *data;
438 bdev->stp_cursor++;
439 data++;
440 count--;
441 }
442
443 /* Retrieve STP info and have a sanity check */
444 if (!bdev->stp_dlen && bdev->stp_cursor >= 6) {
445 shdr = (struct mtk_stp_hdr *)&bdev->stp_pad[2];
446 bdev->stp_dlen = be16_to_cpu(shdr->dlen) & 0x0fff;
447
448 /* Resync STP when unexpected data is being read */
449 if (shdr->prefix != 0x80 || bdev->stp_dlen > 2048) {
450 bt_dev_err(bdev->hdev, "stp format unexpect (%d, %d)",
451 shdr->prefix, bdev->stp_dlen);
452 bdev->stp_cursor = 2;
453 bdev->stp_dlen = 0;
454 }
455 }
456
457 /* Directly quit when there's no data found for H4 can process */
458 if (count <= 0)
459 return NULL;
460
461 /* Tranlate to how much the size of data H4 can handle so far */
462 *sz_h4 = min_t(int, count, bdev->stp_dlen);
463
464 /* Update the remaining size of STP packet */
465 bdev->stp_dlen -= *sz_h4;
466
467 /* Data points to STP payload which can be handled by H4 */
468 return data;
469}
470
471static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count)
472{
473 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
474 const unsigned char *p_left = data, *p_h4;
475 int sz_left = count, sz_h4, adv;
476 int err;
477
478 while (sz_left > 0) {
479 /* The serial data received from MT7622 BT controller is
480 * at all time padded around with the STP header and tailer.
481 *
482 * A full STP packet is looking like
483 * -----------------------------------
484 * | STP header | H:4 | STP tailer |
485 * -----------------------------------
486 * but it doesn't guarantee to contain a full H:4 packet which
487 * means that it's possible for multiple STP packets forms a
488 * full H:4 packet that means extra STP header + length doesn't
489 * indicate a full H:4 frame, things can fragment. Whose length
490 * recorded in STP header just shows up the most length the
491 * H:4 engine can handle currently.
492 */
493
494 p_h4 = mtk_stp_split(bdev, p_left, sz_left, &sz_h4);
495 if (!p_h4)
496 break;
497
498 adv = p_h4 - p_left;
499 sz_left -= adv;
500 p_left += adv;
501
502 bdev->rx_skb = h4_recv_buf(bdev->hdev, bdev->rx_skb, p_h4,
503 sz_h4, mtk_recv_pkts,
504 ARRAY_SIZE(mtk_recv_pkts));
505 if (IS_ERR(bdev->rx_skb)) {
506 err = PTR_ERR(bdev->rx_skb);
507 bt_dev_err(bdev->hdev,
508 "Frame reassembly failed (%d)", err);
509 bdev->rx_skb = NULL;
510 return err;
511 }
512
513 sz_left -= sz_h4;
514 p_left += sz_h4;
515 }
516
517 return 0;
518}
519
520static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data,
521 size_t count)
522{
523 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
524 int err;
525
526 err = btmtkuart_recv(bdev->hdev, data, count);
527 if (err < 0)
528 return err;
529
530 bdev->hdev->stat.byte_rx += count;
531
532 return count;
533}
534
535static void btmtkuart_write_wakeup(struct serdev_device *serdev)
536{
537 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
538
539 btmtkuart_tx_wakeup(bdev);
540}
541
542static const struct serdev_device_ops btmtkuart_client_ops = {
543 .receive_buf = btmtkuart_receive_buf,
544 .write_wakeup = btmtkuart_write_wakeup,
545};
546
547static int btmtkuart_open(struct hci_dev *hdev)
548{
549 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
550 struct device *dev;
551 int err;
552
553 err = serdev_device_open(bdev->serdev);
554 if (err) {
555 bt_dev_err(hdev, "Unable to open UART device %s",
556 dev_name(&bdev->serdev->dev));
557 goto err_open;
558 }
559
560 if (btmtkuart_is_standalone(bdev)) {
561 if (bdev->curr_speed != bdev->desired_speed)
562 err = serdev_device_set_baudrate(bdev->serdev,
563 115200);
564 else
565 err = serdev_device_set_baudrate(bdev->serdev,
566 bdev->desired_speed);
567
568 if (err < 0) {
569 bt_dev_err(hdev, "Unable to set baudrate UART device %s",
570 dev_name(&bdev->serdev->dev));
571 goto err_serdev_close;
572 }
573
574 serdev_device_set_flow_control(bdev->serdev, false);
575 }
576
577 bdev->stp_cursor = 2;
578 bdev->stp_dlen = 0;
579
580 dev = &bdev->serdev->dev;
581
582 /* Enable the power domain and clock the device requires */
583 pm_runtime_enable(dev);
584 err = pm_runtime_get_sync(dev);
585 if (err < 0) {
586 pm_runtime_put_noidle(dev);
587 goto err_disable_rpm;
588 }
589
590 err = clk_prepare_enable(bdev->clk);
591 if (err < 0)
592 goto err_put_rpm;
593
594 return 0;
595
596err_put_rpm:
597 pm_runtime_put_sync(dev);
598err_disable_rpm:
599 pm_runtime_disable(dev);
600err_serdev_close:
601 serdev_device_close(bdev->serdev);
602err_open:
603 return err;
604}
605
606static int btmtkuart_close(struct hci_dev *hdev)
607{
608 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
609 struct device *dev = &bdev->serdev->dev;
610
611 /* Shutdown the clock and power domain the device requires */
612 clk_disable_unprepare(bdev->clk);
613 pm_runtime_put_sync(dev);
614 pm_runtime_disable(dev);
615
616 serdev_device_close(bdev->serdev);
617
618 return 0;
619}
620
621static int btmtkuart_flush(struct hci_dev *hdev)
622{
623 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
624
625 /* Flush any pending characters */
626 serdev_device_write_flush(bdev->serdev);
627 skb_queue_purge(&bdev->txq);
628
629 cancel_work_sync(&bdev->tx_work);
630
631 kfree_skb(bdev->rx_skb);
632 bdev->rx_skb = NULL;
633
634 bdev->stp_cursor = 2;
635 bdev->stp_dlen = 0;
636
637 return 0;
638}
639
640static int btmtkuart_func_query(struct hci_dev *hdev)
641{
642 struct btmtk_hci_wmt_params wmt_params;
643 int status, err;
644 u8 param = 0;
645
646 /* Query whether the function is enabled */
647 wmt_params.op = MTK_WMT_FUNC_CTRL;
648 wmt_params.flag = 4;
649 wmt_params.dlen = sizeof(param);
650 wmt_params.data = ¶m;
651 wmt_params.status = &status;
652
653 err = mtk_hci_wmt_sync(hdev, &wmt_params);
654 if (err < 0) {
655 bt_dev_err(hdev, "Failed to query function status (%d)", err);
656 return err;
657 }
658
659 return status;
660}
661
662static int btmtkuart_change_baudrate(struct hci_dev *hdev)
663{
664 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
665 struct btmtk_hci_wmt_params wmt_params;
666 __le32 baudrate;
667 u8 param;
668 int err;
669
670 /* Indicate the device to enter the probe state the host is
671 * ready to change a new baudrate.
672 */
673 baudrate = cpu_to_le32(bdev->desired_speed);
674 wmt_params.op = MTK_WMT_HIF;
675 wmt_params.flag = 1;
676 wmt_params.dlen = 4;
677 wmt_params.data = &baudrate;
678 wmt_params.status = NULL;
679
680 err = mtk_hci_wmt_sync(hdev, &wmt_params);
681 if (err < 0) {
682 bt_dev_err(hdev, "Failed to device baudrate (%d)", err);
683 return err;
684 }
685
686 err = serdev_device_set_baudrate(bdev->serdev,
687 bdev->desired_speed);
688 if (err < 0) {
689 bt_dev_err(hdev, "Failed to set up host baudrate (%d)",
690 err);
691 return err;
692 }
693
694 serdev_device_set_flow_control(bdev->serdev, false);
695
696 /* Send a dummy byte 0xff to activate the new baudrate */
697 param = 0xff;
698 err = serdev_device_write(bdev->serdev, ¶m, sizeof(param),
699 MAX_SCHEDULE_TIMEOUT);
700 if (err < 0 || err < sizeof(param))
701 return err;
702
703 serdev_device_wait_until_sent(bdev->serdev, 0);
704
705 /* Wait some time for the device changing baudrate done */
706 usleep_range(20000, 22000);
707
708 /* Test the new baudrate */
709 wmt_params.op = MTK_WMT_TEST;
710 wmt_params.flag = 7;
711 wmt_params.dlen = 0;
712 wmt_params.data = NULL;
713 wmt_params.status = NULL;
714
715 err = mtk_hci_wmt_sync(hdev, &wmt_params);
716 if (err < 0) {
717 bt_dev_err(hdev, "Failed to test new baudrate (%d)",
718 err);
719 return err;
720 }
721
722 bdev->curr_speed = bdev->desired_speed;
723
724 return 0;
725}
726
727static int btmtkuart_setup(struct hci_dev *hdev)
728{
729 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
730 struct btmtk_hci_wmt_params wmt_params;
731 ktime_t calltime, delta, rettime;
732 struct btmtk_tci_sleep tci_sleep;
733 unsigned long long duration;
734 struct sk_buff *skb;
735 int err, status;
736 u8 param = 0x1;
737
738 calltime = ktime_get();
739
740 /* Wakeup MCUSYS is required for certain devices before we start to
741 * do any setups.
742 */
743 if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) {
744 wmt_params.op = MTK_WMT_WAKEUP;
745 wmt_params.flag = 3;
746 wmt_params.dlen = 0;
747 wmt_params.data = NULL;
748 wmt_params.status = NULL;
749
750 err = mtk_hci_wmt_sync(hdev, &wmt_params);
751 if (err < 0) {
752 bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err);
753 return err;
754 }
755
756 clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
757 }
758
759 if (btmtkuart_is_standalone(bdev))
760 btmtkuart_change_baudrate(hdev);
761
762 /* Query whether the firmware is already download */
763 wmt_params.op = MTK_WMT_SEMAPHORE;
764 wmt_params.flag = 1;
765 wmt_params.dlen = 0;
766 wmt_params.data = NULL;
767 wmt_params.status = &status;
768
769 err = mtk_hci_wmt_sync(hdev, &wmt_params);
770 if (err < 0) {
771 bt_dev_err(hdev, "Failed to query firmware status (%d)", err);
772 return err;
773 }
774
775 if (status == BTMTK_WMT_PATCH_DONE) {
776 bt_dev_info(hdev, "Firmware already downloaded");
777 goto ignore_setup_fw;
778 }
779
780 /* Setup a firmware which the device definitely requires */
781 err = mtk_setup_firmware(hdev, bdev->data->fwname);
782 if (err < 0)
783 return err;
784
785ignore_setup_fw:
786 /* Query whether the device is already enabled */
787 err = readx_poll_timeout(btmtkuart_func_query, hdev, status,
788 status < 0 || status != BTMTK_WMT_ON_PROGRESS,
789 2000, 5000000);
790 /* -ETIMEDOUT happens */
791 if (err < 0)
792 return err;
793
794 /* The other errors happen in btusb_mtk_func_query */
795 if (status < 0)
796 return status;
797
798 if (status == BTMTK_WMT_ON_DONE) {
799 bt_dev_info(hdev, "function already on");
800 goto ignore_func_on;
801 }
802
803 /* Enable Bluetooth protocol */
804 wmt_params.op = MTK_WMT_FUNC_CTRL;
805 wmt_params.flag = 0;
806 wmt_params.dlen = sizeof(param);
807 wmt_params.data = ¶m;
808 wmt_params.status = NULL;
809
810 err = mtk_hci_wmt_sync(hdev, &wmt_params);
811 if (err < 0) {
812 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
813 return err;
814 }
815
816ignore_func_on:
817 /* Apply the low power environment setup */
818 tci_sleep.mode = 0x5;
819 tci_sleep.duration = cpu_to_le16(0x640);
820 tci_sleep.host_duration = cpu_to_le16(0x640);
821 tci_sleep.host_wakeup_pin = 0;
822 tci_sleep.time_compensation = 0;
823
824 skb = __hci_cmd_sync(hdev, 0xfc7a, sizeof(tci_sleep), &tci_sleep,
825 HCI_INIT_TIMEOUT);
826 if (IS_ERR(skb)) {
827 err = PTR_ERR(skb);
828 bt_dev_err(hdev, "Failed to apply low power setting (%d)", err);
829 return err;
830 }
831 kfree_skb(skb);
832
833 rettime = ktime_get();
834 delta = ktime_sub(rettime, calltime);
835 duration = (unsigned long long)ktime_to_ns(delta) >> 10;
836
837 bt_dev_info(hdev, "Device setup in %llu usecs", duration);
838
839 return 0;
840}
841
842static int btmtkuart_shutdown(struct hci_dev *hdev)
843{
844 struct btmtk_hci_wmt_params wmt_params;
845 u8 param = 0x0;
846 int err;
847
848 /* Disable the device */
849 wmt_params.op = MTK_WMT_FUNC_CTRL;
850 wmt_params.flag = 0;
851 wmt_params.dlen = sizeof(param);
852 wmt_params.data = ¶m;
853 wmt_params.status = NULL;
854
855 err = mtk_hci_wmt_sync(hdev, &wmt_params);
856 if (err < 0) {
857 bt_dev_err(hdev, "Failed to send wmt func ctrl (%d)", err);
858 return err;
859 }
860
861 return 0;
862}
863
864static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
865{
866 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
867 struct mtk_stp_hdr *shdr;
868 int err, dlen, type = 0;
869
870 /* Prepend skb with frame type */
871 memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
872
873 /* Make sure that there is enough rooms for STP header and trailer */
874 if (unlikely(skb_headroom(skb) < sizeof(*shdr)) ||
875 (skb_tailroom(skb) < MTK_STP_TLR_SIZE)) {
876 err = pskb_expand_head(skb, sizeof(*shdr), MTK_STP_TLR_SIZE,
877 GFP_ATOMIC);
878 if (err < 0)
879 return err;
880 }
881
882 /* Add the STP header */
883 dlen = skb->len;
884 shdr = skb_push(skb, sizeof(*shdr));
885 shdr->prefix = 0x80;
886 shdr->dlen = cpu_to_be16((dlen & 0x0fff) | (type << 12));
887 shdr->cs = 0; /* MT7622 doesn't care about checksum value */
888
889 /* Add the STP trailer */
890 skb_put_zero(skb, MTK_STP_TLR_SIZE);
891
892 skb_queue_tail(&bdev->txq, skb);
893
894 btmtkuart_tx_wakeup(bdev);
895 return 0;
896}
897
898static int btmtkuart_parse_dt(struct serdev_device *serdev)
899{
900 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
901 struct device_node *node = serdev->dev.of_node;
902 u32 speed = 921600;
903 int err;
904
905 if (btmtkuart_is_standalone(bdev)) {
906 of_property_read_u32(node, "current-speed", &speed);
907
908 bdev->desired_speed = speed;
909
910 bdev->vcc = devm_regulator_get(&serdev->dev, "vcc");
911 if (IS_ERR(bdev->vcc)) {
912 err = PTR_ERR(bdev->vcc);
913 return err;
914 }
915
916 bdev->osc = devm_clk_get_optional(&serdev->dev, "osc");
917 if (IS_ERR(bdev->osc)) {
918 err = PTR_ERR(bdev->osc);
919 return err;
920 }
921
922 bdev->boot = devm_gpiod_get_optional(&serdev->dev, "boot",
923 GPIOD_OUT_LOW);
924 if (IS_ERR(bdev->boot)) {
925 err = PTR_ERR(bdev->boot);
926 return err;
927 }
928
929 bdev->pinctrl = devm_pinctrl_get(&serdev->dev);
930 if (IS_ERR(bdev->pinctrl)) {
931 err = PTR_ERR(bdev->pinctrl);
932 return err;
933 }
934
935 bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl,
936 "default");
937 if (IS_ERR(bdev->pins_boot) && !bdev->boot) {
938 err = PTR_ERR(bdev->pins_boot);
939 dev_err(&serdev->dev,
940 "Should assign RXD to LOW at boot stage\n");
941 return err;
942 }
943
944 bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl,
945 "runtime");
946 if (IS_ERR(bdev->pins_runtime)) {
947 err = PTR_ERR(bdev->pins_runtime);
948 return err;
949 }
950
951 bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset",
952 GPIOD_OUT_LOW);
953 if (IS_ERR(bdev->reset)) {
954 err = PTR_ERR(bdev->reset);
955 return err;
956 }
957 } else if (btmtkuart_is_builtin_soc(bdev)) {
958 bdev->clk = devm_clk_get(&serdev->dev, "ref");
959 if (IS_ERR(bdev->clk))
960 return PTR_ERR(bdev->clk);
961 }
962
963 return 0;
964}
965
966static int btmtkuart_probe(struct serdev_device *serdev)
967{
968 struct btmtkuart_dev *bdev;
969 struct hci_dev *hdev;
970 int err;
971
972 bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL);
973 if (!bdev)
974 return -ENOMEM;
975
976 bdev->data = of_device_get_match_data(&serdev->dev);
977 if (!bdev->data)
978 return -ENODEV;
979
980 bdev->serdev = serdev;
981 serdev_device_set_drvdata(serdev, bdev);
982
983 serdev_device_set_client_ops(serdev, &btmtkuart_client_ops);
984
985 err = btmtkuart_parse_dt(serdev);
986 if (err < 0)
987 return err;
988
989 INIT_WORK(&bdev->tx_work, btmtkuart_tx_work);
990 skb_queue_head_init(&bdev->txq);
991
992 /* Initialize and register HCI device */
993 hdev = hci_alloc_dev();
994 if (!hdev) {
995 dev_err(&serdev->dev, "Can't allocate HCI device\n");
996 return -ENOMEM;
997 }
998
999 bdev->hdev = hdev;
1000
1001 hdev->bus = HCI_UART;
1002 hci_set_drvdata(hdev, bdev);
1003
1004 hdev->open = btmtkuart_open;
1005 hdev->close = btmtkuart_close;
1006 hdev->flush = btmtkuart_flush;
1007 hdev->setup = btmtkuart_setup;
1008 hdev->shutdown = btmtkuart_shutdown;
1009 hdev->send = btmtkuart_send_frame;
1010 SET_HCIDEV_DEV(hdev, &serdev->dev);
1011
1012 hdev->manufacturer = 70;
1013 set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
1014
1015 if (btmtkuart_is_standalone(bdev)) {
1016 err = clk_prepare_enable(bdev->osc);
1017 if (err < 0)
1018 return err;
1019
1020 if (bdev->boot) {
1021 gpiod_set_value_cansleep(bdev->boot, 1);
1022 } else {
1023 /* Switch to the specific pin state for the booting
1024 * requires.
1025 */
1026 pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
1027 }
1028
1029 /* Power on */
1030 err = regulator_enable(bdev->vcc);
1031 if (err < 0) {
1032 clk_disable_unprepare(bdev->osc);
1033 return err;
1034 }
1035
1036 /* Reset if the reset-gpios is available otherwise the board
1037 * -level design should be guaranteed.
1038 */
1039 if (bdev->reset) {
1040 gpiod_set_value_cansleep(bdev->reset, 1);
1041 usleep_range(1000, 2000);
1042 gpiod_set_value_cansleep(bdev->reset, 0);
1043 }
1044
1045 /* Wait some time until device got ready and switch to the pin
1046 * mode the device requires for UART transfers.
1047 */
1048 msleep(50);
1049
1050 if (bdev->boot)
1051 devm_gpiod_put(&serdev->dev, bdev->boot);
1052
1053 pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime);
1054
1055 /* A standalone device doesn't depends on power domain on SoC,
1056 * so mark it as no callbacks.
1057 */
1058 pm_runtime_no_callbacks(&serdev->dev);
1059
1060 set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
1061 }
1062
1063 err = hci_register_dev(hdev);
1064 if (err < 0) {
1065 dev_err(&serdev->dev, "Can't register HCI device\n");
1066 hci_free_dev(hdev);
1067 goto err_regulator_disable;
1068 }
1069
1070 return 0;
1071
1072err_regulator_disable:
1073 if (btmtkuart_is_standalone(bdev))
1074 regulator_disable(bdev->vcc);
1075
1076 return err;
1077}
1078
1079static void btmtkuart_remove(struct serdev_device *serdev)
1080{
1081 struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
1082 struct hci_dev *hdev = bdev->hdev;
1083
1084 if (btmtkuart_is_standalone(bdev)) {
1085 regulator_disable(bdev->vcc);
1086 clk_disable_unprepare(bdev->osc);
1087 }
1088
1089 hci_unregister_dev(hdev);
1090 hci_free_dev(hdev);
1091}
1092
1093static const struct btmtkuart_data mt7622_data = {
1094 .fwname = FIRMWARE_MT7622,
1095};
1096
1097static const struct btmtkuart_data mt7663_data = {
1098 .flags = BTMTKUART_FLAG_STANDALONE_HW,
1099 .fwname = FIRMWARE_MT7663,
1100};
1101
1102static const struct btmtkuart_data mt7668_data = {
1103 .flags = BTMTKUART_FLAG_STANDALONE_HW,
1104 .fwname = FIRMWARE_MT7668,
1105};
1106
1107#ifdef CONFIG_OF
1108static const struct of_device_id mtk_of_match_table[] = {
1109 { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data},
1110 { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data},
1111 { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data},
1112 { }
1113};
1114MODULE_DEVICE_TABLE(of, mtk_of_match_table);
1115#endif
1116
1117static struct serdev_device_driver btmtkuart_driver = {
1118 .probe = btmtkuart_probe,
1119 .remove = btmtkuart_remove,
1120 .driver = {
1121 .name = "btmtkuart",
1122 .of_match_table = of_match_ptr(mtk_of_match_table),
1123 },
1124};
1125
1126module_serdev_device_driver(btmtkuart_driver);
1127
1128MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
1129MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION);
1130MODULE_VERSION(VERSION);
1131MODULE_LICENSE("GPL");
1132MODULE_FIRMWARE(FIRMWARE_MT7622);
1133MODULE_FIRMWARE(FIRMWARE_MT7663);
1134MODULE_FIRMWARE(FIRMWARE_MT7668);