Loading...
1#!/bin/sh
2# SPDX-License-Identifier: GPL-2.0-only
3
4# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org>
5
6# This script takes a kernel binary and optionally an initrd image
7# and/or a device-tree blob, and creates a bootable zImage for a
8# given platform.
9
10# Options:
11# -o zImage specify output file
12# -p platform specify platform (links in $platform.o)
13# -i initrd specify initrd file
14# -d devtree specify device-tree blob
15# -s tree.dts specify device-tree source file (needs dtc installed)
16# -e esm_blob specify ESM blob for secure images
17# -c cache $kernel.strip.gz (use if present & newer, else make)
18# -C prefix specify command prefix for cross-building tools
19# (strip, objcopy, ld)
20# -D dir specify directory containing data files used by script
21# (default ./arch/powerpc/boot)
22# -W dir specify working directory for temporary files (default .)
23# -z use gzip (legacy)
24# -Z zsuffix compression to use (gz, xz or none)
25
26# Stop execution if any command fails
27set -e
28
29export LC_ALL=C
30
31# Allow for verbose output
32if [ "$V" = 1 ]; then
33 set -x
34 map="-Map wrapper.map"
35fi
36
37# defaults
38kernel=
39ofile=zImage
40platform=of
41initrd=
42dtb=
43dts=
44esm_blob=
45cacheit=
46binary=
47compression=.gz
48uboot_comp=gzip
49pie=
50format=
51notext=
52rodynamic=
53
54# cross-compilation prefix
55CROSS=
56
57# mkimage wrapper script
58MKIMAGE=$srctree/scripts/mkuboot.sh
59
60# directory for object and other files used by this script
61object=arch/powerpc/boot
62objbin=$object
63dtc=scripts/dtc/dtc
64
65# directory for working files
66tmpdir=.
67
68usage() {
69 echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
70 echo ' [-d devtree] [-s tree.dts] [-e esm_blob]' >&2
71 echo ' [-c] [-C cross-prefix] [-D datadir] [-W workingdir]' >&2
72 echo ' [-Z (gz|xz|none)] [--no-compression] [vmlinux]' >&2
73 exit 1
74}
75
76run_cmd() {
77 if [ "$V" = 1 ]; then
78 $* 2>&1
79 else
80 local msg
81
82 set +e
83 msg=$($* 2>&1)
84
85 if [ $? -ne "0" ]; then
86 echo $msg
87 exit 1
88 fi
89 set -e
90 fi
91}
92
93while [ "$#" -gt 0 ]; do
94 case "$1" in
95 -o)
96 shift
97 [ "$#" -gt 0 ] || usage
98 ofile="$1"
99 ;;
100 -p)
101 shift
102 [ "$#" -gt 0 ] || usage
103 platform="$1"
104 ;;
105 -i)
106 shift
107 [ "$#" -gt 0 ] || usage
108 initrd="$1"
109 ;;
110 -d)
111 shift
112 [ "$#" -gt 0 ] || usage
113 dtb="$1"
114 ;;
115 -e)
116 shift
117 [ "$#" -gt 0 ] || usage
118 esm_blob="$1"
119 ;;
120 -s)
121 shift
122 [ "$#" -gt 0 ] || usage
123 dts="$1"
124 ;;
125 -c)
126 cacheit=y
127 ;;
128 -C)
129 shift
130 [ "$#" -gt 0 ] || usage
131 CROSS="$1"
132 ;;
133 -D)
134 shift
135 [ "$#" -gt 0 ] || usage
136 object="$1"
137 objbin="$1"
138 ;;
139 -W)
140 shift
141 [ "$#" -gt 0 ] || usage
142 tmpdir="$1"
143 ;;
144 -z)
145 compression=.gz
146 uboot_comp=gzip
147 ;;
148 -Z)
149 shift
150 [ "$#" -gt 0 ] || usage
151 [ "$1" != "gz" -o "$1" != "xz" -o "$1" != "lzma" -o "$1" != "lzo" -o "$1" != "none" ] || usage
152
153 compression=".$1"
154 uboot_comp=$1
155
156 if [ $compression = ".none" ]; then
157 compression=
158 uboot_comp=none
159 fi
160 if [ $uboot_comp = "gz" ]; then
161 uboot_comp=gzip
162 fi
163 ;;
164 --no-gzip)
165 # a "feature" of the wrapper script is that it can be used outside
166 # the kernel tree. So keeping this around for backwards compatibility.
167 compression=
168 uboot_comp=none
169 ;;
170 -?)
171 usage
172 ;;
173 *)
174 [ -z "$kernel" ] || usage
175 kernel="$1"
176 ;;
177 esac
178 shift
179done
180
181
182if [ -n "$dts" ]; then
183 if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then
184 dts="$object/dts/$dts"
185 fi
186 if [ -z "$dtb" ]; then
187 dtb="$platform.dtb"
188 fi
189 $dtc -O dtb -o "$dtb" -b 0 "$dts"
190fi
191
192if [ -z "$kernel" ]; then
193 kernel=vmlinux
194fi
195
196LC_ALL=C elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
197case "$elfformat" in
198 elf64-powerpcle) format=elf64lppc ;;
199 elf64-powerpc) format=elf32ppc ;;
200 elf32-powerpc) format=elf32ppc ;;
201esac
202
203ld_version()
204{
205 # Poached from scripts/ld-version.sh, but we don't want to call that because
206 # this script (wrapper) is distributed separately from the kernel source.
207 # Extract linker version number from stdin and turn into single number.
208 awk '{
209 gsub(".*\\)", "");
210 gsub(".*version ", "");
211 gsub("-.*", "");
212 split($1,a, ".");
213 if( length(a[3]) == "8" )
214 # a[3] is probably a date of format yyyymmdd used for release snapshots. We
215 # can assume it to be zero as it does not signify a new version as such.
216 a[3] = 0;
217 print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
218 exit
219 }'
220}
221
222ld_is_lld()
223{
224 ${CROSS}ld -V 2>&1 | grep -q LLD
225}
226
227# Do not include PT_INTERP segment when linking pie. Non-pie linking
228# just ignores this option.
229LD_VERSION=$(${CROSS}ld --version | ld_version)
230LD_NO_DL_MIN_VERSION=$(echo 2.26 | ld_version)
231if [ "$LD_VERSION" -ge "$LD_NO_DL_MIN_VERSION" ] ; then
232 nodl="--no-dynamic-linker"
233fi
234
235# suppress some warnings in recent ld versions
236nowarn="-z noexecstack"
237if ! ld_is_lld; then
238 if [ "$LD_VERSION" -ge "$(echo 2.39 | ld_version)" ]; then
239 nowarn="$nowarn --no-warn-rwx-segments"
240 fi
241fi
242
243platformo=$object/"$platform".o
244lds=$object/zImage.lds
245ext=strip
246objflags=-S
247tmp=$tmpdir/zImage.$$.o
248ksection=.kernel:vmlinux.strip
249isection=.kernel:initrd
250esection=.kernel:esm_blob
251link_address='0x400000'
252make_space=y
253
254
255if [ -n "$esm_blob" -a "$platform" != "pseries" ]; then
256 echo "ESM blob not support on non-pseries platforms" >&2
257 exit 1
258fi
259
260case "$platform" in
261of)
262 platformo="$object/of.o $object/epapr.o"
263 make_space=n
264 ;;
265pseries)
266 platformo="$object/pseries-head.o $object/of.o $object/epapr.o"
267 link_address='0x4000000'
268 if [ "$format" != "elf32ppc" ]; then
269 link_address=
270 pie=-pie
271 fi
272 make_space=n
273 ;;
274maple)
275 platformo="$object/of.o $object/epapr.o"
276 link_address='0x400000'
277 make_space=n
278 ;;
279pmac|chrp)
280 platformo="$object/of.o $object/epapr.o"
281 make_space=n
282 ;;
283coff)
284 platformo="$object/crt0.o $object/of.o $object/epapr.o"
285 lds=$object/zImage.coff.lds
286 link_address='0x500000'
287 make_space=n
288 pie=
289 ;;
290miboot|uboot*)
291 # miboot and U-boot want just the bare bits, not an ELF binary
292 ext=bin
293 objflags="-O binary"
294 tmp="$ofile"
295 ksection=image
296 isection=initrd
297 ;;
298cuboot*)
299 binary=y
300 compression=
301 case "$platform" in
302 *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
303 platformo=$object/cuboot-8xx.o
304 ;;
305 *5200*|*-motionpro)
306 platformo=$object/cuboot-52xx.o
307 ;;
308 *-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter)
309 platformo=$object/cuboot-pq2.o
310 ;;
311 *-mpc824*)
312 platformo=$object/cuboot-824x.o
313 ;;
314 *-mpc83*|*-asp834x*)
315 platformo=$object/cuboot-83xx.o
316 ;;
317 *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
318 platformo=$object/cuboot-85xx-cpm2.o
319 ;;
320 *-mpc85*|*-tqm85*)
321 platformo=$object/cuboot-85xx.o
322 ;;
323 *-amigaone)
324 link_address='0x800000'
325 ;;
326 esac
327 ;;
328ps3)
329 platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
330 lds=$object/zImage.ps3.lds
331 compression=
332 ext=bin
333 objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
334 ksection=.kernel:vmlinux.bin
335 isection=.kernel:initrd
336 link_address=''
337 make_space=n
338 pie=
339 ;;
340ep88xc|ep405|ep8248e)
341 platformo="$object/fixed-head.o $object/$platform.o"
342 binary=y
343 ;;
344adder875-redboot)
345 platformo="$object/fixed-head.o $object/redboot-8xx.o"
346 binary=y
347 ;;
348simpleboot-*)
349 platformo="$object/fixed-head.o $object/simpleboot.o"
350 binary=y
351 ;;
352asp834x-redboot)
353 platformo="$object/fixed-head.o $object/redboot-83xx.o"
354 binary=y
355 ;;
356xpedite52*)
357 link_address='0x1400000'
358 platformo=$object/cuboot-85xx.o
359 ;;
360gamecube|wii)
361 link_address='0x600000'
362 platformo="$object/$platform-head.o $object/$platform.o"
363 ;;
364microwatt)
365 link_address='0x500000'
366 platformo="$object/fixed-head.o $object/$platform.o"
367 binary=y
368 ;;
369treeboot-currituck)
370 link_address='0x1000000'
371 ;;
372treeboot-akebono)
373 link_address='0x1000000'
374 ;;
375treeboot-iss4xx-mpic)
376 platformo="$object/treeboot-iss4xx.o"
377 ;;
378epapr)
379 platformo="$object/pseries-head.o $object/epapr.o $object/epapr-wrapper.o"
380 link_address='0x20000000'
381 pie=-pie
382 notext='-z notext'
383 rodynamic=$(if ${CROSS}ld -V 2>&1 | grep -q LLD ; then echo "-z rodynamic"; fi)
384 ;;
385mvme5100)
386 platformo="$object/fixed-head.o $object/mvme5100.o"
387 binary=y
388 ;;
389mvme7100)
390 platformo="$object/motload-head.o $object/mvme7100.o"
391 link_address='0x4000000'
392 binary=y
393 ;;
394esac
395
396vmz="$tmpdir/`basename \"$kernel\"`.$ext"
397
398# Calculate the vmlinux.strip size
399${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
400strip_size=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$vmz.$$")
401
402if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel" ]; then
403 # recompress the image if we need to
404 case $compression in
405 .xz)
406 xz --check=crc32 -f -6 "$vmz.$$"
407 ;;
408 .gz)
409 gzip -n -f -9 "$vmz.$$"
410 ;;
411 .lzma)
412 xz --format=lzma -f -6 "$vmz.$$"
413 ;;
414 .lzo)
415 lzop -f -9 "$vmz.$$"
416 ;;
417 *)
418 # drop the compression suffix so the stripped vmlinux is used
419 compression=
420 uboot_comp=none
421 ;;
422 esac
423
424 if [ -n "$cacheit" ]; then
425 mv -f "$vmz.$$$compression" "$vmz$compression"
426 else
427 vmz="$vmz.$$"
428 fi
429else
430 rm -f $vmz.$$
431fi
432
433vmz="$vmz$compression"
434
435if [ "$make_space" = "y" ]; then
436 # Round the size to next higher MB limit
437 round_size=$(((strip_size + 0xfffff) & 0xfff00000))
438
439 round_size=0x$(printf "%x" $round_size)
440 link_addr=$(printf "%d" $link_address)
441
442 if [ $link_addr -lt $strip_size ]; then
443 echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
444 "overlaps the address of the wrapper($link_address)"
445 echo "INFO: Fixing the link_address of wrapper to ($round_size)"
446 link_address=$round_size
447 fi
448fi
449
450# Extract kernel version information, some platforms want to include
451# it in the image header
452version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
453 head -n1 | cut -d' ' -f3`
454if [ -n "$version" ]; then
455 uboot_version="-n Linux-$version"
456fi
457
458# physical offset of kernel image
459membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
460
461case "$platform" in
462uboot)
463 rm -f "$ofile"
464 ${MKIMAGE} -A ppc -O linux -T kernel -C $uboot_comp -a $membase -e $membase \
465 $uboot_version -d "$vmz" "$ofile"
466 if [ -z "$cacheit" ]; then
467 rm -f "$vmz"
468 fi
469 exit 0
470 ;;
471uboot-obs600)
472 rm -f "$ofile"
473 # obs600 wants a multi image with an initrd, so we need to put a fake
474 # one in even when building a "normal" image.
475 if [ -n "$initrd" ]; then
476 real_rd="$initrd"
477 else
478 real_rd=`mktemp`
479 echo "\0" >>"$real_rd"
480 fi
481 ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \
482 $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile"
483 if [ -z "$initrd" ]; then
484 rm -f "$real_rd"
485 fi
486 if [ -z "$cacheit" ]; then
487 rm -f "$vmz"
488 fi
489 exit 0
490 ;;
491esac
492
493addsec() {
494 ${CROSS}objcopy $4 $1 \
495 --add-section=$3="$2" \
496 --set-section-flags=$3=contents,alloc,load,readonly,data
497}
498
499addsec $tmp "$vmz" $ksection $object/empty.o
500if [ -z "$cacheit" ]; then
501 rm -f "$vmz"
502fi
503
504if [ -n "$initrd" ]; then
505 addsec $tmp "$initrd" $isection
506fi
507
508if [ -n "$dtb" ]; then
509 addsec $tmp "$dtb" .kernel:dtb
510 if [ -n "$dts" ]; then
511 rm $dtb
512 fi
513fi
514
515if [ -n "$esm_blob" ]; then
516 addsec $tmp "$esm_blob" $esection
517fi
518
519if [ "$platform" != "miboot" ]; then
520 if [ -n "$link_address" ] ; then
521 text_start="-Ttext $link_address"
522 fi
523#link everything
524 ${CROSS}ld -m $format -T $lds $text_start $pie $nodl $nowarn $rodynamic $notext -o "$ofile" $map \
525 $platformo $tmp $object/wrapper.a
526 rm $tmp
527fi
528
529# Some platforms need the zImage's entry point and base address
530base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
531entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
532
533if [ -n "$binary" ]; then
534 mv "$ofile" "$ofile".elf
535 ${CROSS}objcopy -O binary "$ofile".elf "$ofile"
536fi
537
538# post-processing needed for some platforms
539case "$platform" in
540pseries|chrp|maple)
541 $objbin/addnote "$ofile"
542 ;;
543coff)
544 ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
545 $objbin/hack-coff "$ofile"
546 ;;
547cuboot*)
548 gzip -n -f -9 "$ofile"
549 ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
550 $uboot_version -d "$ofile".gz "$ofile"
551 ;;
552treeboot*)
553 mv "$ofile" "$ofile.elf"
554 $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry"
555 if [ -z "$cacheit" ]; then
556 rm -f "$ofile.elf"
557 fi
558 exit 0
559 ;;
560ps3)
561 # The ps3's loader supports loading a gzipped binary image from flash
562 # rom to ram addr zero. The loader then enters the system reset
563 # vector at addr 0x100. A bootwrapper overlay is used to arrange for
564 # a binary image of the kernel to be at addr zero, and yet have a
565 # suitable bootwrapper entry at 0x100. To construct the final rom
566 # image 512 bytes from offset 0x100 is copied to the bootwrapper
567 # place holder at symbol __system_reset_kernel. The 512 bytes of the
568 # bootwrapper entry code at symbol __system_reset_overlay is then
569 # copied to offset 0x100. At runtime the bootwrapper program copies
570 # the data at __system_reset_kernel back to addr 0x100.
571
572 system_reset_overlay=0x`${CROSS}nm "$ofile" \
573 | grep ' __system_reset_overlay$' \
574 | cut -d' ' -f1`
575 system_reset_overlay=`printf "%d" $system_reset_overlay`
576 system_reset_kernel=0x`${CROSS}nm "$ofile" \
577 | grep ' __system_reset_kernel$' \
578 | cut -d' ' -f1`
579 system_reset_kernel=`printf "%d" $system_reset_kernel`
580 overlay_dest="256"
581 overlay_size="512"
582
583 ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
584
585 run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
586 skip=$overlay_dest seek=$system_reset_kernel \
587 count=$overlay_size bs=1
588
589 run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
590 skip=$system_reset_overlay seek=$overlay_dest \
591 count=$overlay_size bs=1
592
593 odir="$(dirname "$ofile.bin")"
594
595 # The ps3's flash loader has a size limit of 16 MiB for the uncompressed
596 # image. If a compressed image that exceeded this limit is written to
597 # flash the loader will decompress that image until the 16 MiB limit is
598 # reached, then enter the system reset vector of the partially decompressed
599 # image. No warning is issued.
600 rm -f "$odir"/{otheros,otheros-too-big}.bld
601 size=$(${CROSS}nm --no-sort --radix=d "$ofile" | grep -E ' _end$' | cut -d' ' -f1)
602 bld="otheros.bld"
603 if [ $size -gt $((0x1000000)) ]; then
604 bld="otheros-too-big.bld"
605 fi
606 gzip -n --force -9 --stdout "$ofile.bin" > "$odir/$bld"
607 ;;
608esac
1#!/bin/sh
2# SPDX-License-Identifier: GPL-2.0-only
3
4# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org>
5
6# This script takes a kernel binary and optionally an initrd image
7# and/or a device-tree blob, and creates a bootable zImage for a
8# given platform.
9
10# Options:
11# -o zImage specify output file
12# -p platform specify platform (links in $platform.o)
13# -i initrd specify initrd file
14# -d devtree specify device-tree blob
15# -s tree.dts specify device-tree source file (needs dtc installed)
16# -e esm_blob specify ESM blob for secure images
17# -c cache $kernel.strip.gz (use if present & newer, else make)
18# -C prefix specify command prefix for cross-building tools
19# (strip, objcopy, ld)
20# -D dir specify directory containing data files used by script
21# (default ./arch/powerpc/boot)
22# -W dir specify working directory for temporary files (default .)
23# -z use gzip (legacy)
24# -Z zsuffix compression to use (gz, xz or none)
25
26# Stop execution if any command fails
27set -e
28
29# Allow for verbose output
30if [ "$V" = 1 ]; then
31 set -x
32fi
33
34# defaults
35kernel=
36ofile=zImage
37platform=of
38initrd=
39dtb=
40dts=
41esm_blob=
42cacheit=
43binary=
44compression=.gz
45uboot_comp=gzip
46pie=
47format=
48
49# cross-compilation prefix
50CROSS=
51
52# mkimage wrapper script
53MKIMAGE=$srctree/scripts/mkuboot.sh
54
55# directory for object and other files used by this script
56object=arch/powerpc/boot
57objbin=$object
58dtc=scripts/dtc/dtc
59
60# directory for working files
61tmpdir=.
62
63usage() {
64 echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
65 echo ' [-d devtree] [-s tree.dts] [-e esm_blob]' >&2
66 echo ' [-c] [-C cross-prefix] [-D datadir] [-W workingdir]' >&2
67 echo ' [-Z (gz|xz|none)] [--no-compression] [vmlinux]' >&2
68 exit 1
69}
70
71run_cmd() {
72 if [ "$V" = 1 ]; then
73 $* 2>&1
74 else
75 local msg
76
77 set +e
78 msg=$($* 2>&1)
79
80 if [ $? -ne "0" ]; then
81 echo $msg
82 exit 1
83 fi
84 set -e
85 fi
86}
87
88while [ "$#" -gt 0 ]; do
89 case "$1" in
90 -o)
91 shift
92 [ "$#" -gt 0 ] || usage
93 ofile="$1"
94 ;;
95 -p)
96 shift
97 [ "$#" -gt 0 ] || usage
98 platform="$1"
99 ;;
100 -i)
101 shift
102 [ "$#" -gt 0 ] || usage
103 initrd="$1"
104 ;;
105 -d)
106 shift
107 [ "$#" -gt 0 ] || usage
108 dtb="$1"
109 ;;
110 -e)
111 shift
112 [ "$#" -gt 0 ] || usage
113 esm_blob="$1"
114 ;;
115 -s)
116 shift
117 [ "$#" -gt 0 ] || usage
118 dts="$1"
119 ;;
120 -c)
121 cacheit=y
122 ;;
123 -C)
124 shift
125 [ "$#" -gt 0 ] || usage
126 CROSS="$1"
127 ;;
128 -D)
129 shift
130 [ "$#" -gt 0 ] || usage
131 object="$1"
132 objbin="$1"
133 ;;
134 -W)
135 shift
136 [ "$#" -gt 0 ] || usage
137 tmpdir="$1"
138 ;;
139 -z)
140 compression=.gz
141 uboot_comp=gzip
142 ;;
143 -Z)
144 shift
145 [ "$#" -gt 0 ] || usage
146 [ "$1" != "gz" -o "$1" != "xz" -o "$1" != "lzma" -o "$1" != "lzo" -o "$1" != "none" ] || usage
147
148 compression=".$1"
149 uboot_comp=$1
150
151 if [ $compression = ".none" ]; then
152 compression=
153 uboot_comp=none
154 fi
155 if [ $uboot_comp = "gz" ]; then
156 uboot_comp=gzip
157 fi
158 ;;
159 --no-gzip)
160 # a "feature" of the the wrapper script is that it can be used outside
161 # the kernel tree. So keeping this around for backwards compatibility.
162 compression=
163 uboot_comp=none
164 ;;
165 -?)
166 usage
167 ;;
168 *)
169 [ -z "$kernel" ] || usage
170 kernel="$1"
171 ;;
172 esac
173 shift
174done
175
176
177if [ -n "$dts" ]; then
178 if [ ! -r "$dts" -a -r "$object/dts/$dts" ]; then
179 dts="$object/dts/$dts"
180 fi
181 if [ -z "$dtb" ]; then
182 dtb="$platform.dtb"
183 fi
184 $dtc -O dtb -o "$dtb" -b 0 "$dts"
185fi
186
187if [ -z "$kernel" ]; then
188 kernel=vmlinux
189fi
190
191LANG=C elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
192case "$elfformat" in
193 elf64-powerpcle) format=elf64lppc ;;
194 elf64-powerpc) format=elf32ppc ;;
195 elf32-powerpc) format=elf32ppc ;;
196esac
197
198ld_version()
199{
200 # Poached from scripts/ld-version.sh, but we don't want to call that because
201 # this script (wrapper) is distributed separately from the kernel source.
202 # Extract linker version number from stdin and turn into single number.
203 awk '{
204 gsub(".*\\)", "");
205 gsub(".*version ", "");
206 gsub("-.*", "");
207 split($1,a, ".");
208 print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
209 exit
210 }'
211}
212
213# Do not include PT_INTERP segment when linking pie. Non-pie linking
214# just ignores this option.
215LD_VERSION=$(${CROSS}ld --version | ld_version)
216LD_NO_DL_MIN_VERSION=$(echo 2.26 | ld_version)
217if [ "$LD_VERSION" -ge "$LD_NO_DL_MIN_VERSION" ] ; then
218 nodl="--no-dynamic-linker"
219fi
220
221platformo=$object/"$platform".o
222lds=$object/zImage.lds
223ext=strip
224objflags=-S
225tmp=$tmpdir/zImage.$$.o
226ksection=.kernel:vmlinux.strip
227isection=.kernel:initrd
228esection=.kernel:esm_blob
229link_address='0x400000'
230make_space=y
231
232
233if [ -n "$esm_blob" -a "$platform" != "pseries" ]; then
234 echo "ESM blob not support on non-pseries platforms" >&2
235 exit 1
236fi
237
238case "$platform" in
239of)
240 platformo="$object/of.o $object/epapr.o"
241 make_space=n
242 ;;
243pseries)
244 platformo="$object/pseries-head.o $object/of.o $object/epapr.o"
245 link_address='0x4000000'
246 if [ "$format" != "elf32ppc" ]; then
247 link_address=
248 pie=-pie
249 fi
250 make_space=n
251 ;;
252maple)
253 platformo="$object/of.o $object/epapr.o"
254 link_address='0x400000'
255 make_space=n
256 ;;
257pmac|chrp)
258 platformo="$object/of.o $object/epapr.o"
259 make_space=n
260 ;;
261coff)
262 platformo="$object/crt0.o $object/of.o $object/epapr.o"
263 lds=$object/zImage.coff.lds
264 link_address='0x500000'
265 make_space=n
266 pie=
267 ;;
268miboot|uboot*)
269 # miboot and U-boot want just the bare bits, not an ELF binary
270 ext=bin
271 objflags="-O binary"
272 tmp="$ofile"
273 ksection=image
274 isection=initrd
275 ;;
276cuboot*)
277 binary=y
278 compression=
279 case "$platform" in
280 *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
281 platformo=$object/cuboot-8xx.o
282 ;;
283 *5200*|*-motionpro)
284 platformo=$object/cuboot-52xx.o
285 ;;
286 *-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter)
287 platformo=$object/cuboot-pq2.o
288 ;;
289 *-mpc824*)
290 platformo=$object/cuboot-824x.o
291 ;;
292 *-mpc83*|*-asp834x*)
293 platformo=$object/cuboot-83xx.o
294 ;;
295 *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
296 platformo=$object/cuboot-85xx-cpm2.o
297 ;;
298 *-mpc85*|*-tqm85*|*-sbc85*)
299 platformo=$object/cuboot-85xx.o
300 ;;
301 *-amigaone)
302 link_address='0x800000'
303 ;;
304 esac
305 ;;
306ps3)
307 platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
308 lds=$object/zImage.ps3.lds
309 compression=
310 ext=bin
311 objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
312 ksection=.kernel:vmlinux.bin
313 isection=.kernel:initrd
314 link_address=''
315 make_space=n
316 pie=
317 ;;
318ep88xc|ep405|ep8248e)
319 platformo="$object/fixed-head.o $object/$platform.o"
320 binary=y
321 ;;
322adder875-redboot)
323 platformo="$object/fixed-head.o $object/redboot-8xx.o"
324 binary=y
325 ;;
326simpleboot-virtex405-*)
327 platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
328 binary=y
329 ;;
330simpleboot-virtex440-*)
331 platformo="$object/fixed-head.o $object/simpleboot.o $object/virtex.o"
332 binary=y
333 ;;
334simpleboot-*)
335 platformo="$object/fixed-head.o $object/simpleboot.o"
336 binary=y
337 ;;
338asp834x-redboot)
339 platformo="$object/fixed-head.o $object/redboot-83xx.o"
340 binary=y
341 ;;
342xpedite52*)
343 link_address='0x1400000'
344 platformo=$object/cuboot-85xx.o
345 ;;
346gamecube|wii)
347 link_address='0x600000'
348 platformo="$object/$platform-head.o $object/$platform.o"
349 ;;
350treeboot-currituck)
351 link_address='0x1000000'
352 ;;
353treeboot-akebono)
354 link_address='0x1000000'
355 ;;
356treeboot-iss4xx-mpic)
357 platformo="$object/treeboot-iss4xx.o"
358 ;;
359epapr)
360 platformo="$object/pseries-head.o $object/epapr.o $object/epapr-wrapper.o"
361 link_address='0x20000000'
362 pie=-pie
363 ;;
364mvme5100)
365 platformo="$object/fixed-head.o $object/mvme5100.o"
366 binary=y
367 ;;
368mvme7100)
369 platformo="$object/motload-head.o $object/mvme7100.o"
370 link_address='0x4000000'
371 binary=y
372 ;;
373esac
374
375vmz="$tmpdir/`basename \"$kernel\"`.$ext"
376
377# Calculate the vmlinux.strip size
378${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
379strip_size=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$vmz.$$")
380
381if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel" ]; then
382 # recompress the image if we need to
383 case $compression in
384 .xz)
385 xz --check=crc32 -f -6 "$vmz.$$"
386 ;;
387 .gz)
388 gzip -n -f -9 "$vmz.$$"
389 ;;
390 .lzma)
391 xz --format=lzma -f -6 "$vmz.$$"
392 ;;
393 .lzo)
394 lzop -f -9 "$vmz.$$"
395 ;;
396 *)
397 # drop the compression suffix so the stripped vmlinux is used
398 compression=
399 uboot_comp=none
400 ;;
401 esac
402
403 if [ -n "$cacheit" ]; then
404 mv -f "$vmz.$$$compression" "$vmz$compression"
405 else
406 vmz="$vmz.$$"
407 fi
408else
409 rm -f $vmz.$$
410fi
411
412vmz="$vmz$compression"
413
414if [ "$make_space" = "y" ]; then
415 # Round the size to next higher MB limit
416 round_size=$(((strip_size + 0xfffff) & 0xfff00000))
417
418 round_size=0x$(printf "%x" $round_size)
419 link_addr=$(printf "%d" $link_address)
420
421 if [ $link_addr -lt $strip_size ]; then
422 echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
423 "overlaps the address of the wrapper($link_address)"
424 echo "INFO: Fixing the link_address of wrapper to ($round_size)"
425 link_address=$round_size
426 fi
427fi
428
429# Extract kernel version information, some platforms want to include
430# it in the image header
431version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
432 cut -d' ' -f3`
433if [ -n "$version" ]; then
434 uboot_version="-n Linux-$version"
435fi
436
437# physical offset of kernel image
438membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
439
440case "$platform" in
441uboot)
442 rm -f "$ofile"
443 ${MKIMAGE} -A ppc -O linux -T kernel -C $uboot_comp -a $membase -e $membase \
444 $uboot_version -d "$vmz" "$ofile"
445 if [ -z "$cacheit" ]; then
446 rm -f "$vmz"
447 fi
448 exit 0
449 ;;
450uboot-obs600)
451 rm -f "$ofile"
452 # obs600 wants a multi image with an initrd, so we need to put a fake
453 # one in even when building a "normal" image.
454 if [ -n "$initrd" ]; then
455 real_rd="$initrd"
456 else
457 real_rd=`mktemp`
458 echo "\0" >>"$real_rd"
459 fi
460 ${MKIMAGE} -A ppc -O linux -T multi -C gzip -a $membase -e $membase \
461 $uboot_version -d "$vmz":"$real_rd":"$dtb" "$ofile"
462 if [ -z "$initrd" ]; then
463 rm -f "$real_rd"
464 fi
465 if [ -z "$cacheit" ]; then
466 rm -f "$vmz"
467 fi
468 exit 0
469 ;;
470esac
471
472addsec() {
473 ${CROSS}objcopy $4 $1 \
474 --add-section=$3="$2" \
475 --set-section-flags=$3=contents,alloc,load,readonly,data
476}
477
478addsec $tmp "$vmz" $ksection $object/empty.o
479if [ -z "$cacheit" ]; then
480 rm -f "$vmz"
481fi
482
483if [ -n "$initrd" ]; then
484 addsec $tmp "$initrd" $isection
485fi
486
487if [ -n "$dtb" ]; then
488 addsec $tmp "$dtb" .kernel:dtb
489 if [ -n "$dts" ]; then
490 rm $dtb
491 fi
492fi
493
494if [ -n "$esm_blob" ]; then
495 addsec $tmp "$esm_blob" $esection
496fi
497
498if [ "$platform" != "miboot" ]; then
499 if [ -n "$link_address" ] ; then
500 text_start="-Ttext $link_address"
501 fi
502#link everything
503 ${CROSS}ld -m $format -T $lds $text_start $pie $nodl -o "$ofile" \
504 $platformo $tmp $object/wrapper.a
505 rm $tmp
506fi
507
508# Some platforms need the zImage's entry point and base address
509base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
510entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
511
512if [ -n "$binary" ]; then
513 mv "$ofile" "$ofile".elf
514 ${CROSS}objcopy -O binary "$ofile".elf "$ofile"
515fi
516
517# post-processing needed for some platforms
518case "$platform" in
519pseries|chrp|maple)
520 $objbin/addnote "$ofile"
521 ;;
522coff)
523 ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
524 $objbin/hack-coff "$ofile"
525 ;;
526cuboot*)
527 gzip -n -f -9 "$ofile"
528 ${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
529 $uboot_version -d "$ofile".gz "$ofile"
530 ;;
531treeboot*)
532 mv "$ofile" "$ofile.elf"
533 $objbin/mktree "$ofile.elf" "$ofile" "$base" "$entry"
534 if [ -z "$cacheit" ]; then
535 rm -f "$ofile.elf"
536 fi
537 exit 0
538 ;;
539ps3)
540 # The ps3's loader supports loading a gzipped binary image from flash
541 # rom to ram addr zero. The loader then enters the system reset
542 # vector at addr 0x100. A bootwrapper overlay is used to arrange for
543 # a binary image of the kernel to be at addr zero, and yet have a
544 # suitable bootwrapper entry at 0x100. To construct the final rom
545 # image 512 bytes from offset 0x100 is copied to the bootwrapper
546 # place holder at symbol __system_reset_kernel. The 512 bytes of the
547 # bootwrapper entry code at symbol __system_reset_overlay is then
548 # copied to offset 0x100. At runtime the bootwrapper program copies
549 # the data at __system_reset_kernel back to addr 0x100.
550
551 system_reset_overlay=0x`${CROSS}nm "$ofile" \
552 | grep ' __system_reset_overlay$' \
553 | cut -d' ' -f1`
554 system_reset_overlay=`printf "%d" $system_reset_overlay`
555 system_reset_kernel=0x`${CROSS}nm "$ofile" \
556 | grep ' __system_reset_kernel$' \
557 | cut -d' ' -f1`
558 system_reset_kernel=`printf "%d" $system_reset_kernel`
559 overlay_dest="256"
560 overlay_size="512"
561
562 ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
563
564 run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
565 skip=$overlay_dest seek=$system_reset_kernel \
566 count=$overlay_size bs=1
567
568 run_cmd dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
569 skip=$system_reset_overlay seek=$overlay_dest \
570 count=$overlay_size bs=1
571
572 odir="$(dirname "$ofile.bin")"
573 rm -f "$odir/otheros.bld"
574 gzip -n --force -9 --stdout "$ofile.bin" > "$odir/otheros.bld"
575 ;;
576esac